Loading...
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8 model = "Iomega Iconnect";
9 compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11 memory {
12 device_type = "memory";
13 reg = <0x00000000 0x10000000>;
14 };
15
16 chosen {
17 bootargs = "console=ttyS0,115200n8 earlyprintk";
18 stdout-path = &uart0;
19 linux,initrd-start = <0x4500040>;
20 linux,initrd-end = <0x4800000>;
21 };
22
23 ocp@f1000000 {
24 pinctrl: pin-controller@10000 {
25 pmx_button_reset: pmx-button-reset {
26 marvell,pins = "mpp12";
27 marvell,function = "gpio";
28 };
29 pmx_button_otb: pmx-button-otb {
30 marvell,pins = "mpp35";
31 marvell,function = "gpio";
32 };
33 pmx_led_level: pmx-led-level {
34 marvell,pins = "mpp41";
35 marvell,function = "gpio";
36 };
37 pmx_led_power_blue: pmx-led-power-blue {
38 marvell,pins = "mpp42";
39 marvell,function = "gpio";
40 };
41 pmx_led_power_red: pmx-power-red {
42 marvell,pins = "mpp43";
43 marvell,function = "gpio";
44 };
45 pmx_led_usb1: pmx-led-usb1 {
46 marvell,pins = "mpp44";
47 marvell,function = "gpio";
48 };
49 pmx_led_usb2: pmx-led-usb2 {
50 marvell,pins = "mpp45";
51 marvell,function = "gpio";
52 };
53 pmx_led_usb3: pmx-led-usb3 {
54 marvell,pins = "mpp46";
55 marvell,function = "gpio";
56 };
57 pmx_led_usb4: pmx-led-usb4 {
58 marvell,pins = "mpp47";
59 marvell,function = "gpio";
60 };
61 pmx_led_otb: pmx-led-otb {
62 marvell,pins = "mpp48";
63 marvell,function = "gpio";
64 };
65 };
66 i2c@11000 {
67 status = "okay";
68
69 lm63: lm63@4c {
70 compatible = "national,lm63";
71 reg = <0x4c>;
72 };
73 };
74 serial@12000 {
75 status = "ok";
76 };
77 };
78
79 gpio-leds {
80 compatible = "gpio-leds";
81 pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
82 &pmx_led_power_red &pmx_led_usb1
83 &pmx_led_usb2 &pmx_led_usb3
84 &pmx_led_usb4 &pmx_led_otb >;
85 pinctrl-names = "default";
86
87 led-level {
88 label = "led_level";
89 gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
90 default-state = "on";
91 };
92 power-blue {
93 label = "power:blue";
94 gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
95 default-state = "keep";
96 };
97 power-red {
98 label = "power:red";
99 gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
100 };
101 usb1 {
102 label = "usb1:blue";
103 gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
104 };
105 usb2 {
106 label = "usb2:blue";
107 gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
108 };
109 usb3 {
110 label = "usb3:blue";
111 gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
112 };
113 usb4 {
114 label = "usb4:blue";
115 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
116 };
117 otb {
118 label = "otb:blue";
119 gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
120 };
121 };
122
123 gpio_keys {
124 compatible = "gpio-keys";
125 #address-cells = <1>;
126 #size-cells = <0>;
127 pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
128 pinctrl-names = "default";
129
130 otb {
131 label = "OTB Button";
132 linux,code = <KEY_COPY>;
133 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
134 debounce-interval = <100>;
135 };
136 reset {
137 label = "Reset";
138 linux,code = <KEY_RESTART>;
139 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
140 debounce-interval = <100>;
141 };
142 };
143};
144
145&nand {
146 status = "okay";
147
148 partition@0 {
149 label = "uboot";
150 reg = <0x0000000 0xc0000>;
151 };
152
153 partition@a0000 {
154 label = "env";
155 reg = <0xa0000 0x20000>;
156 };
157
158 partition@100000 {
159 label = "zImage";
160 reg = <0x100000 0x300000>;
161 };
162
163 partition@540000 {
164 label = "initrd";
165 reg = <0x540000 0x300000>;
166 };
167
168 partition@980000 {
169 label = "boot";
170 reg = <0x980000 0x1f400000>;
171 };
172};
173
174&mdio {
175 status = "okay";
176
177 ethphy0: ethernet-phy@11 {
178 reg = <11>;
179 };
180};
181
182ð0 {
183 status = "okay";
184 ethernet0-port@0 {
185 phy-handle = <ðphy0>;
186 };
187};
188
189&pciec {
190 status = "okay";
191};
192
193&pcie0 {
194 status = "okay";
195};
1/dts-v1/;
2
3#include "kirkwood.dtsi"
4#include "kirkwood-6281.dtsi"
5
6/ {
7 model = "Iomega Iconnect";
8 compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
9
10 memory {
11 device_type = "memory";
12 reg = <0x00000000 0x10000000>;
13 };
14
15 chosen {
16 bootargs = "console=ttyS0,115200n8 earlyprintk";
17 stdout-path = &uart0;
18 linux,initrd-start = <0x4500040>;
19 linux,initrd-end = <0x4800000>;
20 };
21
22 ocp@f1000000 {
23 pinctrl: pin-controller@10000 {
24 pmx_button_reset: pmx-button-reset {
25 marvell,pins = "mpp12";
26 marvell,function = "gpio";
27 };
28 pmx_button_otb: pmx-button-otb {
29 marvell,pins = "mpp35";
30 marvell,function = "gpio";
31 };
32 pmx_led_level: pmx-led-level {
33 marvell,pins = "mpp41";
34 marvell,function = "gpio";
35 };
36 pmx_led_power_blue: pmx-led-power-blue {
37 marvell,pins = "mpp42";
38 marvell,function = "gpio";
39 };
40 pmx_led_power_red: pmx-power-red {
41 marvell,pins = "mpp43";
42 marvell,function = "gpio";
43 };
44 pmx_led_usb1: pmx-led-usb1 {
45 marvell,pins = "mpp44";
46 marvell,function = "gpio";
47 };
48 pmx_led_usb2: pmx-led-usb2 {
49 marvell,pins = "mpp45";
50 marvell,function = "gpio";
51 };
52 pmx_led_usb3: pmx-led-usb3 {
53 marvell,pins = "mpp46";
54 marvell,function = "gpio";
55 };
56 pmx_led_usb4: pmx-led-usb4 {
57 marvell,pins = "mpp47";
58 marvell,function = "gpio";
59 };
60 pmx_led_otb: pmx-led-otb {
61 marvell,pins = "mpp48";
62 marvell,function = "gpio";
63 };
64 };
65 i2c@11000 {
66 status = "okay";
67
68 lm63: lm63@4c {
69 compatible = "national,lm63";
70 reg = <0x4c>;
71 };
72 };
73 serial@12000 {
74 status = "ok";
75 };
76 };
77
78 gpio-leds {
79 compatible = "gpio-leds";
80 pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
81 &pmx_led_power_red &pmx_led_usb1
82 &pmx_led_usb2 &pmx_led_usb3
83 &pmx_led_usb4 &pmx_led_otb >;
84 pinctrl-names = "default";
85
86 led-level {
87 label = "led_level";
88 gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
89 default-state = "on";
90 };
91 power-blue {
92 label = "power:blue";
93 gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
94 default-state = "keep";
95 };
96 power-red {
97 label = "power:red";
98 gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
99 };
100 usb1 {
101 label = "usb1:blue";
102 gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
103 };
104 usb2 {
105 label = "usb2:blue";
106 gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
107 };
108 usb3 {
109 label = "usb3:blue";
110 gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
111 };
112 usb4 {
113 label = "usb4:blue";
114 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
115 };
116 otb {
117 label = "otb:blue";
118 gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
119 };
120 };
121
122 gpio_keys {
123 compatible = "gpio-keys";
124 #address-cells = <1>;
125 #size-cells = <0>;
126 pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
127 pinctrl-names = "default";
128
129 otb {
130 label = "OTB Button";
131 linux,code = <KEY_COPY>;
132 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
133 debounce-interval = <100>;
134 };
135 reset {
136 label = "Reset";
137 linux,code = <KEY_RESTART>;
138 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
139 debounce-interval = <100>;
140 };
141 };
142};
143
144&nand {
145 status = "okay";
146
147 partition@0 {
148 label = "uboot";
149 reg = <0x0000000 0xc0000>;
150 };
151
152 partition@a0000 {
153 label = "env";
154 reg = <0xa0000 0x20000>;
155 };
156
157 partition@100000 {
158 label = "zImage";
159 reg = <0x100000 0x300000>;
160 };
161
162 partition@540000 {
163 label = "initrd";
164 reg = <0x540000 0x300000>;
165 };
166
167 partition@980000 {
168 label = "boot";
169 reg = <0x980000 0x1f400000>;
170 };
171};
172
173&mdio {
174 status = "okay";
175
176 ethphy0: ethernet-phy@11 {
177 reg = <11>;
178 };
179};
180
181ð0 {
182 status = "okay";
183 ethernet0-port@0 {
184 phy-handle = <ðphy0>;
185 };
186};
187
188&pciec {
189 status = "okay";
190};
191
192&pcie0 {
193 status = "okay";
194};