Loading...
1/*
2 * BSD LICENSE
3 *
4 * Copyright(c) 2016 Broadcom. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
15 * distribution.
16 * * Neither the name of Broadcom Corporation nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/dts-v1/;
34
35#include "bcm-nsp.dtsi"
36#include <dt-bindings/gpio/gpio.h>
37
38/ {
39 model = "NorthStar Plus SVK (BCM958623HR)";
40 compatible = "brcm,bcm58623", "brcm,nsp";
41
42 aliases {
43 serial0 = &uart0;
44 };
45
46 chosen {
47 stdout-path = "serial0:115200n8";
48 };
49
50 memory {
51 device_type = "memory";
52 reg = <0x60000000 0x80000000>;
53 };
54
55 gpio-restart {
56 compatible = "gpio-restart";
57 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
58 open-source;
59 priority = <200>;
60 };
61};
62
63/* USB 3 and SLIC support needed to be complete */
64
65&amac0 {
66 status = "okay";
67};
68
69&amac1 {
70 status = "okay";
71};
72
73&amac2 {
74 status = "okay";
75};
76
77&ehci0 {
78 status = "okay";
79};
80
81&nand {
82 nandcs@0 {
83 compatible = "brcm,nandcs";
84 reg = <0>;
85 nand-on-flash-bbt;
86
87 #address-cells = <1>;
88 #size-cells = <1>;
89
90 nand-ecc-strength = <24>;
91 nand-ecc-step-size = <1024>;
92
93 brcm,nand-oob-sector-size = <27>;
94
95 partition@0 {
96 label = "nboot";
97 reg = <0x00000000 0x00200000>;
98 read-only;
99 };
100 partition@200000 {
101 label = "nenv";
102 reg = <0x00200000 0x00400000>;
103 };
104 partition@600000 {
105 label = "nsystem";
106 reg = <0x00600000 0x00a00000>;
107 };
108 partition@1000000 {
109 label = "nrootfs";
110 reg = <0x01000000 0x03000000>;
111 };
112 partition@4000000 {
113 label = "ncustfs";
114 reg = <0x04000000 0x3c000000>;
115 };
116 };
117};
118
119&ohci0 {
120 status = "okay";
121};
122
123&pcie0 {
124 status = "okay";
125};
126
127&pcie1 {
128 status = "okay";
129};
130
131&pinctrl {
132 pinctrl-names = "default";
133 pinctrl-0 = <&nand_sel>;
134 nand_sel: nand_sel {
135 function = "nand";
136 groups = "nand_grp";
137 };
138};
139
140&sata_phy0 {
141 status = "okay";
142};
143
144&qspi {
145 bspi-sel = <0>;
146 flash: m25p80@0 {
147 #address-cells = <1>;
148 #size-cells = <1>;
149 compatible = "m25p80";
150 reg = <0x0>;
151 spi-max-frequency = <12500000>;
152 m25p,fast-read;
153 spi-cpol;
154 spi-cpha;
155
156 partition@0 {
157 label = "boot";
158 reg = <0x00000000 0x000a0000>;
159 };
160
161 partition@a0000 {
162 label = "env";
163 reg = <0x000a0000 0x00060000>;
164 };
165
166 partition@100000 {
167 label = "system";
168 reg = <0x00100000 0x00600000>;
169 };
170
171 partition@700000 {
172 label = "rootfs";
173 reg = <0x00700000 0x01900000>;
174 };
175 };
176};
177
178&srab {
179 compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
180 status = "okay";
181
182 ports {
183 #address-cells = <1>;
184 #size-cells = <0>;
185
186 port@0 {
187 label = "port0";
188 reg = <0>;
189 };
190
191 port@1 {
192 label = "port1";
193 reg = <1>;
194 };
195
196 port@2 {
197 label = "port2";
198 reg = <2>;
199 };
200
201 port@3 {
202 label = "port3";
203 reg = <3>;
204 };
205
206 port@4 {
207 label = "port4";
208 reg = <4>;
209 };
210
211 port@8 {
212 ethernet = <&amac2>;
213 label = "cpu";
214 reg = <8>;
215 fixed-link {
216 speed = <1000>;
217 full-duplex;
218 };
219 };
220 };
221};
222
223&uart0 {
224 status = "okay";
225};
226
227&usb3_phy {
228 status = "okay";
229};
230
231&xhci {
232 status = "okay";
233};
1/*
2 * BSD LICENSE
3 *
4 * Copyright(c) 2016 Broadcom. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
15 * distribution.
16 * * Neither the name of Broadcom Corporation nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/dts-v1/;
34
35#include "bcm-nsp.dtsi"
36#include <dt-bindings/gpio/gpio.h>
37
38/ {
39 model = "NorthStar Plus SVK (BCM958623HR)";
40 compatible = "brcm,bcm58623", "brcm,nsp";
41
42 aliases {
43 serial0 = &uart0;
44 };
45
46 chosen {
47 stdout-path = "serial0:115200n8";
48 };
49
50 memory {
51 device_type = "memory";
52 reg = <0x60000000 0x80000000>;
53 };
54
55 gpio-restart {
56 compatible = "gpio-restart";
57 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
58 priority = <200>;
59 };
60};
61
62/* USB 2/3 and SLIC support needed to be complete */
63
64&amac0 {
65 status = "okay";
66};
67
68&nand {
69 nandcs@0 {
70 compatible = "brcm,nandcs";
71 reg = <0>;
72 nand-on-flash-bbt;
73
74 #address-cells = <1>;
75 #size-cells = <1>;
76
77 nand-ecc-strength = <24>;
78 nand-ecc-step-size = <1024>;
79
80 brcm,nand-oob-sector-size = <27>;
81
82 partition@0 {
83 label = "nboot";
84 reg = <0x00000000 0x00200000>;
85 read-only;
86 };
87 partition@200000 {
88 label = "nenv";
89 reg = <0x00200000 0x00400000>;
90 };
91 partition@600000 {
92 label = "nsystem";
93 reg = <0x00600000 0x00a00000>;
94 };
95 partition@1000000 {
96 label = "nrootfs";
97 reg = <0x01000000 0x03000000>;
98 };
99 partition@4000000 {
100 label = "ncustfs";
101 reg = <0x04000000 0x3c000000>;
102 };
103 };
104};
105
106&pcie0 {
107 status = "okay";
108};
109
110&pcie1 {
111 status = "okay";
112};
113
114&pinctrl {
115 pinctrl-names = "default";
116 pinctrl-0 = <&nand_sel>;
117 nand_sel: nand_sel {
118 function = "nand";
119 groups = "nand_grp";
120 };
121};
122
123&srab {
124 compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
125 status = "okay";
126
127 ports {
128 #address-cells = <1>;
129 #size-cells = <0>;
130
131 port@0 {
132 label = "port0";
133 reg = <0>;
134 };
135
136 port@1 {
137 label = "port1";
138 reg = <1>;
139 };
140
141 port@2 {
142 label = "port2";
143 reg = <2>;
144 };
145
146 port@3 {
147 label = "port3";
148 reg = <3>;
149 };
150
151 port@4 {
152 label = "port4";
153 reg = <4>;
154 };
155
156 port@5 {
157 ethernet = <&amac0>;
158 label = "cpu";
159 reg = <5>;
160 fixed-link {
161 speed = <1000>;
162 full-duplex;
163 };
164 };
165 };
166};
167
168&sata_phy0 {
169 status = "okay";
170};
171
172&sata {
173 status = "okay";
174};
175
176&uart0 {
177 status = "okay";
178};