Loading...
1/*
2 * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
3 *
4 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5 *
6 * Licensed under GPLv2.
7 */
8#include "at91sam9g20.dtsi"
9
10/ {
11
12 chosen {
13 bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
14 stdout-path = "serial0:115200n8";
15 };
16
17 memory {
18 reg = <0x20000000 0x4000000>;
19 };
20
21 clocks {
22 slow_xtal {
23 clock-frequency = <32768>;
24 };
25
26 main_xtal {
27 clock-frequency = <18432000>;
28 };
29 };
30
31 ahb {
32 apb {
33 pinctrl@fffff400 {
34 board {
35 pinctrl_pck0_as_mck: pck0_as_mck {
36 atmel,pins =
37 <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */
38 };
39
40 };
41
42 mmc0_slot1 {
43 pinctrl_board_mmc0_slot1: mmc0_slot1-board {
44 atmel,pins =
45 <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */
46 };
47 };
48 };
49
50 dbgu: serial@fffff200 {
51 status = "okay";
52 };
53
54 tcb0: timer@fffa0000 {
55 timer@0 {
56 compatible = "atmel,tcb-timer";
57 reg = <0>, <1>;
58 };
59
60 timer@2 {
61 compatible = "atmel,tcb-timer";
62 reg = <2>;
63 };
64 };
65
66 usart0: serial@fffb0000 {
67 pinctrl-0 =
68 <&pinctrl_usart0
69 &pinctrl_usart0_rts
70 &pinctrl_usart0_cts
71 &pinctrl_usart0_dtr_dsr
72 &pinctrl_usart0_dcd
73 &pinctrl_usart0_ri>;
74 status = "okay";
75 };
76
77 usart1: serial@fffb4000 {
78 status = "okay";
79 };
80
81 macb0: ethernet@fffc4000 {
82 phy-mode = "rmii";
83 status = "okay";
84 };
85
86 usb1: gadget@fffa4000 {
87 atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
88 status = "okay";
89 };
90
91 mmc0: mmc@fffa8000 {
92 pinctrl-0 = <
93 &pinctrl_board_mmc0_slot1
94 &pinctrl_mmc0_clk
95 &pinctrl_mmc0_slot1_cmd_dat0
96 &pinctrl_mmc0_slot1_dat1_3>;
97 status = "okay";
98 slot@1 {
99 reg = <1>;
100 bus-width = <4>;
101 cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
102 };
103 };
104
105 ssc0: ssc@fffbc000 {
106 status = "okay";
107 pinctrl-0 = <&pinctrl_ssc0_tx>;
108 };
109
110 spi0: spi@fffc8000 {
111 cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
112 mtd_dataflash@0 {
113 compatible = "atmel,at45", "atmel,dataflash";
114 spi-max-frequency = <50000000>;
115 reg = <1>;
116 };
117 };
118
119 shdwc@fffffd10 {
120 atmel,wakeup-counter = <10>;
121 atmel,wakeup-rtt-timer;
122 };
123
124 rtc@fffffd20 {
125 atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
126 status = "okay";
127 };
128
129 watchdog@fffffd40 {
130 status = "okay";
131 };
132
133 gpbr: syscon@fffffd50 {
134 status = "okay";
135 };
136 };
137
138 ebi: ebi@10000000 {
139 status = "okay";
140
141 nand_controller: nand-controller {
142 status = "okay";
143 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
144 pinctrl-names = "default";
145
146 nand@3 {
147 reg = <0x3 0x0 0x800000>;
148 rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
149 cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
150 nand-bus-width = <8>;
151 nand-ecc-mode = "soft";
152 nand-on-flash-bbt;
153 label = "atmel_nand";
154
155 partitions {
156 compatible = "fixed-partitions";
157 #address-cells = <1>;
158 #size-cells = <1>;
159
160 at91bootstrap@0 {
161 label = "at91bootstrap";
162 reg = <0x0 0x20000>;
163 };
164
165 barebox@20000 {
166 label = "barebox";
167 reg = <0x20000 0x40000>;
168 };
169
170 bareboxenv@60000 {
171 label = "bareboxenv";
172 reg = <0x60000 0x20000>;
173 };
174
175 bareboxenv2@80000 {
176 label = "bareboxenv2";
177 reg = <0x80000 0x20000>;
178 };
179
180 oftree@80000 {
181 label = "oftree";
182 reg = <0xa0000 0x20000>;
183 };
184
185 kernel@a0000 {
186 label = "kernel";
187 reg = <0xc0000 0x400000>;
188 };
189
190 rootfs@4a0000 {
191 label = "rootfs";
192 reg = <0x4c0000 0x7800000>;
193 };
194
195 data@7ca0000 {
196 label = "data";
197 reg = <0x7cc0000 0x8340000>;
198 };
199 };
200 };
201 };
202 };
203
204 usb0: ohci@500000 {
205 num-ports = <2>;
206 status = "okay";
207 };
208 };
209
210 i2c-gpio-0 {
211 status = "okay";
212
213 24c512@50 {
214 compatible = "atmel,24c512";
215 reg = <0x50>;
216 };
217
218 wm8731: wm8731@1b {
219 compatible = "wm8731";
220 reg = <0x1b>;
221 };
222 };
223
224 gpio_keys {
225 compatible = "gpio-keys";
226
227 btn3 {
228 label = "Button 3";
229 gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
230 linux,code = <0x103>;
231 wakeup-source;
232 };
233
234 btn4 {
235 label = "Button 4";
236 gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
237 linux,code = <0x104>;
238 wakeup-source;
239 };
240 };
241
242 sound {
243 compatible = "atmel,at91sam9g20ek-wm8731-audio";
244 pinctrl-names = "default";
245 pinctrl-0 = <&pinctrl_pck0_as_mck>;
246
247 atmel,model = "wm8731 @ AT91SAMG20EK";
248
249 atmel,audio-routing =
250 "Ext Spk", "LHPOUT",
251 "Int Mic", "MICIN";
252
253 atmel,ssc-controller = <&ssc0>;
254 atmel,audio-codec = <&wm8731>;
255 };
256};
1/*
2 * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
3 *
4 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5 *
6 * Licensed under GPLv2.
7 */
8#include "at91sam9g20.dtsi"
9
10/ {
11
12 chosen {
13 bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
14 stdout-path = "serial0:115200n8";
15 };
16
17 memory {
18 reg = <0x20000000 0x4000000>;
19 };
20
21 clocks {
22 slow_xtal {
23 clock-frequency = <32768>;
24 };
25
26 main_xtal {
27 clock-frequency = <18432000>;
28 };
29 };
30
31 ahb {
32 apb {
33 pinctrl@fffff400 {
34 board {
35 pinctrl_pck0_as_mck: pck0_as_mck {
36 atmel,pins =
37 <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */
38 };
39
40 };
41
42 mmc0_slot1 {
43 pinctrl_board_mmc0_slot1: mmc0_slot1-board {
44 atmel,pins =
45 <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */
46 };
47 };
48 };
49
50 dbgu: serial@fffff200 {
51 status = "okay";
52 };
53
54 usart0: serial@fffb0000 {
55 pinctrl-0 =
56 <&pinctrl_usart0
57 &pinctrl_usart0_rts
58 &pinctrl_usart0_cts
59 &pinctrl_usart0_dtr_dsr
60 &pinctrl_usart0_dcd
61 &pinctrl_usart0_ri>;
62 status = "okay";
63 };
64
65 usart1: serial@fffb4000 {
66 status = "okay";
67 };
68
69 macb0: ethernet@fffc4000 {
70 phy-mode = "rmii";
71 status = "okay";
72 };
73
74 usb1: gadget@fffa4000 {
75 atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
76 status = "okay";
77 };
78
79 mmc0: mmc@fffa8000 {
80 pinctrl-0 = <
81 &pinctrl_board_mmc0_slot1
82 &pinctrl_mmc0_clk
83 &pinctrl_mmc0_slot1_cmd_dat0
84 &pinctrl_mmc0_slot1_dat1_3>;
85 status = "okay";
86 slot@1 {
87 reg = <1>;
88 bus-width = <4>;
89 cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
90 };
91 };
92
93 ssc0: ssc@fffbc000 {
94 status = "okay";
95 pinctrl-0 = <&pinctrl_ssc0_tx>;
96 };
97
98 spi0: spi@fffc8000 {
99 cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
100 mtd_dataflash@0 {
101 compatible = "atmel,at45", "atmel,dataflash";
102 spi-max-frequency = <50000000>;
103 reg = <1>;
104 };
105 };
106
107 shdwc@fffffd10 {
108 atmel,wakeup-counter = <10>;
109 atmel,wakeup-rtt-timer;
110 };
111
112 rtc@fffffd20 {
113 atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
114 status = "okay";
115 };
116
117 watchdog@fffffd40 {
118 status = "okay";
119 };
120
121 gpbr: syscon@fffffd50 {
122 status = "okay";
123 };
124 };
125
126 nand0: nand@40000000 {
127 nand-bus-width = <8>;
128 nand-ecc-mode = "soft";
129 nand-on-flash-bbt;
130 status = "okay";
131
132 at91bootstrap@0 {
133 label = "at91bootstrap";
134 reg = <0x0 0x20000>;
135 };
136
137 barebox@20000 {
138 label = "barebox";
139 reg = <0x20000 0x40000>;
140 };
141
142 bareboxenv@60000 {
143 label = "bareboxenv";
144 reg = <0x60000 0x20000>;
145 };
146
147 bareboxenv2@80000 {
148 label = "bareboxenv2";
149 reg = <0x80000 0x20000>;
150 };
151
152 oftree@80000 {
153 label = "oftree";
154 reg = <0xa0000 0x20000>;
155 };
156
157 kernel@a0000 {
158 label = "kernel";
159 reg = <0xc0000 0x400000>;
160 };
161
162 rootfs@4a0000 {
163 label = "rootfs";
164 reg = <0x4c0000 0x7800000>;
165 };
166
167 data@7ca0000 {
168 label = "data";
169 reg = <0x7cc0000 0x8340000>;
170 };
171 };
172
173 usb0: ohci@500000 {
174 num-ports = <2>;
175 status = "okay";
176 };
177 };
178
179 i2c-gpio-0 {
180 status = "okay";
181
182 24c512@50 {
183 compatible = "24c512";
184 reg = <0x50>;
185 };
186
187 wm8731: wm8731@1b {
188 compatible = "wm8731";
189 reg = <0x1b>;
190 };
191 };
192
193 gpio_keys {
194 compatible = "gpio-keys";
195
196 btn3 {
197 label = "Button 3";
198 gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
199 linux,code = <0x103>;
200 wakeup-source;
201 };
202
203 btn4 {
204 label = "Button 4";
205 gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
206 linux,code = <0x104>;
207 wakeup-source;
208 };
209 };
210
211 sound {
212 compatible = "atmel,at91sam9g20ek-wm8731-audio";
213 pinctrl-names = "default";
214 pinctrl-0 = <&pinctrl_pck0_as_mck>;
215
216 atmel,model = "wm8731 @ AT91SAMG20EK";
217
218 atmel,audio-routing =
219 "Ext Spk", "LHPOUT",
220 "Int Mic", "MICIN";
221
222 atmel,ssc-controller = <&ssc0>;
223 atmel,audio-codec = <&wm8731>;
224 };
225};