Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Common support for omap3 EVM boards
4 */
5
6#include <dt-bindings/input/input.h>
7#include "omap-gpmc-smsc911x.dtsi"
8
9/ {
10 cpus {
11 cpu@0 {
12 cpu0-supply = <&vcc>;
13 };
14 };
15
16 /* HS USB Port 2 Power */
17 hsusb2_power: hsusb2_power_reg {
18 compatible = "regulator-fixed";
19 regulator-name = "hsusb2_vbus";
20 regulator-min-microvolt = <3300000>;
21 regulator-max-microvolt = <3300000>;
22 gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
23 startup-delay-us = <70000>;
24 enable-active-high;
25 };
26
27 /* HS USB Host PHY on PORT 2 */
28 hsusb2_phy: hsusb2_phy {
29 compatible = "usb-nop-xceiv";
30 reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
31 vcc-supply = <&hsusb2_power>;
32 #phy-cells = <0>;
33 };
34
35 leds {
36 compatible = "gpio-leds";
37 ledb {
38 label = "omap3evm::ledb";
39 gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
40 linux,default-trigger = "default-on";
41 };
42 };
43
44 wl12xx_vmmc: wl12xx_vmmc {
45 compatible = "regulator-fixed";
46 regulator-name = "vwl1271";
47 regulator-min-microvolt = <1800000>;
48 regulator-max-microvolt = <1800000>;
49 gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */
50 startup-delay-us = <70000>;
51 enable-active-high;
52 vin-supply = <&vmmc2>;
53 };
54};
55
56&i2c1 {
57 clock-frequency = <2600000>;
58
59 twl: twl@48 {
60 reg = <0x48>;
61 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
62 interrupt-parent = <&intc>;
63 };
64};
65
66#include "twl4030.dtsi"
67#include "twl4030_omap3.dtsi"
68#include "omap3-panel-sharp-ls037v7dw01.dtsi"
69
70&backlight0 {
71 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
72};
73
74&twl {
75 twl_power: power {
76 compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
77 ti,use_poweroff;
78 };
79};
80
81&i2c2 {
82 clock-frequency = <400000>;
83};
84
85&i2c3 {
86 clock-frequency = <400000>;
87
88 /*
89 * TVP5146 Video decoder-in for analog input support.
90 */
91 tvp5146@5c {
92 compatible = "ti,tvp5146m2";
93 reg = <0x5c>;
94 };
95};
96
97&lcd_3v3 {
98 gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */
99};
100
101&lcd0 {
102 enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
103 reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
104 mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
105 &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
106 &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
107};
108
109&mcspi1 {
110 tsc2046@0 {
111 interrupt-parent = <&gpio6>;
112 interrupts = <15 0>; /* gpio175 */
113 pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
114 };
115};
116
117&mmc1 {
118 interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
119 vmmc-supply = <&vmmc1>;
120 vqmmc-supply = <&vsim>;
121 bus-width = <8>;
122};
123
124&mmc2 {
125 vmmc-supply = <&wl12xx_vmmc>;
126 non-removable;
127 bus-width = <4>;
128 cap-power-off-card;
129
130 #address-cells = <1>;
131 #size-cells = <0>;
132 wlcore: wlcore@2 {
133 compatible = "ti,wl1271";
134 reg = <2>;
135 interrupt-parent = <&gpio5>;
136 interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
137 ref-clock-frequency = <38400000>;
138 };
139};
140
141&twl_gpio {
142 ti,use-leds;
143};
144
145&twl_keypad {
146 linux,keymap = <
147 MATRIX_KEY(2, 2, KEY_1)
148 MATRIX_KEY(1, 1, KEY_2)
149 MATRIX_KEY(0, 0, KEY_3)
150 MATRIX_KEY(3, 2, KEY_4)
151 MATRIX_KEY(2, 1, KEY_5)
152 MATRIX_KEY(1, 0, KEY_6)
153 MATRIX_KEY(1, 3, KEY_7)
154 MATRIX_KEY(3, 1, KEY_8)
155 MATRIX_KEY(2, 0, KEY_9)
156 MATRIX_KEY(2, 3, KEY_KPASTERISK)
157 MATRIX_KEY(0, 2, KEY_0)
158 MATRIX_KEY(3, 0, KEY_KPDOT)
159 /* s4 not wired */
160 MATRIX_KEY(1, 2, KEY_BACKSPACE)
161 MATRIX_KEY(0, 1, KEY_ENTER)
162 >;
163};
164
165&usbhshost {
166 port2-mode = "ehci-phy";
167};
168
169&usbhsehci {
170 phys = <0 &hsusb2_phy>;
171};
172
173&usb_otg_hs {
174 interface-type = <0>;
175 usb-phy = <&usb2_phy>;
176 phys = <&usb2_phy>;
177 phy-names = "usb2-phy";
178 mode = <3>;
179 power = <50>;
180};
181
182&gpmc {
183 ethernet@gpmc {
184 interrupt-parent = <&gpio6>;
185 interrupts = <16 8>;
186 reg = <5 0 0xff>;
187 };
188};
189
190&vaux2 {
191 regulator-name = "usb_1v8";
192 regulator-min-microvolt = <1800000>;
193 regulator-max-microvolt = <1800000>;
194 regulator-always-on;
195};
1/*
2 * Common support for omap3 EVM boards
3 */
4
5#include <dt-bindings/input/input.h>
6#include "omap-gpmc-smsc911x.dtsi"
7
8/ {
9 cpus {
10 cpu@0 {
11 cpu0-supply = <&vcc>;
12 };
13 };
14
15 leds {
16 compatible = "gpio-leds";
17 ledb {
18 label = "omap3evm::ledb";
19 gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
20 linux,default-trigger = "default-on";
21 };
22 };
23
24 wl12xx_vmmc: wl12xx_vmmc {
25 compatible = "regulator-fixed";
26 regulator-name = "vwl1271";
27 regulator-min-microvolt = <1800000>;
28 regulator-max-microvolt = <1800000>;
29 gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */
30 startup-delay-us = <70000>;
31 enable-active-high;
32 vin-supply = <&vmmc2>;
33 };
34};
35
36&i2c1 {
37 clock-frequency = <2600000>;
38
39 twl: twl@48 {
40 reg = <0x48>;
41 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
42 interrupt-parent = <&intc>;
43 };
44};
45
46#include "twl4030.dtsi"
47#include "twl4030_omap3.dtsi"
48#include "omap3-panel-sharp-ls037v7dw01.dtsi"
49
50&backlight0 {
51 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
52};
53
54&twl {
55 twl_power: power {
56 compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
57 ti,use_poweroff;
58 };
59};
60
61&i2c2 {
62 clock-frequency = <400000>;
63};
64
65&i2c3 {
66 clock-frequency = <400000>;
67
68 /*
69 * TVP5146 Video decoder-in for analog input support.
70 */
71 tvp5146@5c {
72 compatible = "ti,tvp5146m2";
73 reg = <0x5c>;
74 };
75};
76
77&lcd_3v3 {
78 gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */
79 enable-active-low;
80};
81
82&lcd0 {
83 enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
84 reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
85 mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
86 &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
87 &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
88};
89
90&mcspi1 {
91 tsc2046@0 {
92 interrupt-parent = <&gpio6>;
93 interrupts = <15 0>; /* gpio175 */
94 pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
95 };
96};
97
98&mmc1 {
99 interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
100 vmmc-supply = <&vmmc1>;
101 vmmc_aux-supply = <&vsim>;
102 bus-width = <8>;
103};
104
105&mmc2 {
106 vmmc-supply = <&wl12xx_vmmc>;
107 non-removable;
108 bus-width = <4>;
109 cap-power-off-card;
110
111 #address-cells = <1>;
112 #size-cells = <0>;
113 wlcore: wlcore@2 {
114 compatible = "ti,wl1271";
115 reg = <2>;
116 interrupt-parent = <&gpio5>;
117 interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
118 ref-clock-frequency = <38400000>;
119 };
120};
121
122&twl_gpio {
123 ti,use-leds;
124};
125
126&twl_keypad {
127 linux,keymap = <
128 MATRIX_KEY(2, 2, KEY_1)
129 MATRIX_KEY(1, 1, KEY_2)
130 MATRIX_KEY(0, 0, KEY_3)
131 MATRIX_KEY(3, 2, KEY_4)
132 MATRIX_KEY(2, 1, KEY_5)
133 MATRIX_KEY(1, 0, KEY_6)
134 MATRIX_KEY(1, 3, KEY_7)
135 MATRIX_KEY(3, 1, KEY_8)
136 MATRIX_KEY(2, 0, KEY_9)
137 MATRIX_KEY(2, 3, KEY_KPASTERISK)
138 MATRIX_KEY(0, 2, KEY_0)
139 MATRIX_KEY(3, 0, KEY_KPDOT)
140 /* s4 not wired */
141 MATRIX_KEY(1, 2, KEY_BACKSPACE)
142 MATRIX_KEY(0, 1, KEY_ENTER)
143 >;
144};
145
146&usb_otg_hs {
147 interface-type = <0>;
148 usb-phy = <&usb2_phy>;
149 phys = <&usb2_phy>;
150 phy-names = "usb2-phy";
151 mode = <3>;
152 power = <50>;
153};
154
155&gpmc {
156 ethernet@gpmc {
157 interrupt-parent = <&gpio6>;
158 interrupts = <16 8>;
159 reg = <5 0 0xff>;
160 };
161};