1#
  2# QLogic network device configuration
  3#
  4
  5config NET_VENDOR_QLOGIC
  6	bool "QLogic devices"
  7	default y
  8	depends on PCI
  9	---help---
 10	  If you have a network (Ethernet) card belonging to this class, say Y.
 
 
 11
 12	  Note that the answer to this question doesn't directly affect the
 13	  kernel: saying N will just cause the configurator to skip all
 14	  the questions about QLogic cards. If you say Y, you will be asked for
 15	  your specific card in the following questions.
 16
 17if NET_VENDOR_QLOGIC
 18
 19config QLA3XXX
 20	tristate "QLogic QLA3XXX Network Driver Support"
 21	depends on PCI
 22	---help---
 23	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
 24
 25	  To compile this driver as a module, choose M here: the module
 26	  will be called qla3xxx.
 27
 28config QLCNIC
 29	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
 30	depends on PCI
 31	select FW_LOADER
 32	---help---
 33	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
 34	  devices.
 35
 36config QLCNIC_SRIOV
 37	bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
 38	depends on QLCNIC && PCI_IOV
 39	default y
 40	---help---
 41	  This configuration parameter enables Single Root Input Output
 42	  Virtualization support for QLE83XX Converged Ethernet devices.
 43	  This allows for virtual function acceleration in virtualized
 44	  environments.
 45
 46config QLCNIC_DCB
 47	bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
 48	depends on QLCNIC && DCB
 49	default y
 50	---help---
 51	  This configuration parameter enables DCB support in QLE83XX
 52	  and QLE82XX Converged Ethernet devices. This allows for DCB
 53	  get operations support through rtNetlink interface. Only CEE
 54	  mode of DCB is supported. PG and PFC values are related only
 55	  to Tx.
 56
 57config QLCNIC_HWMON
 58	bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
 59	depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
 60	default y
 61	---help---
 62	  This configuration parameter can be used to read the
 63	  board temperature in Converged Ethernet devices
 64	  supported by qlcnic.
 65
 66	  This data is available via the hwmon sysfs interface.
 67
 68config QLGE
 69	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
 70	depends on PCI
 71	---help---
 72	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
 73
 74	  To compile this driver as a module, choose M here: the module
 75	  will be called qlge.
 76
 77config NETXEN_NIC
 78	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
 79	depends on PCI
 80	select FW_LOADER
 81	---help---
 82	  This enables the support for NetXen's Gigabit Ethernet card.
 83
 84config QED
 85	tristate "QLogic QED 25/40/100Gb core driver"
 86	depends on PCI
 87	select ZLIB_INFLATE
 88	select CRC8
 89	---help---
 90	  This enables the support for ...
 91
 92config QED_LL2
 93	bool
 94
 95config QED_SRIOV
 96	bool "QLogic QED 25/40/100Gb SR-IOV support"
 97	depends on QED && PCI_IOV
 98	default y
 99	---help---
100	  This configuration parameter enables Single Root Input Output
101	  Virtualization support for QED devices.
102	  This allows for virtual function acceleration in virtualized
103	  environments.
104
105config QEDE
106	tristate "QLogic QED 25/40/100Gb Ethernet NIC"
107	depends on QED
108	imply PTP_1588_CLOCK
109	---help---
110	  This enables the support for ...
111
112config QED_RDMA
113	bool
114
115config QED_ISCSI
116	bool
117
118config QED_FCOE
119	bool
120
121config QED_OOO
122	bool
123
124endif # NET_VENDOR_QLOGIC

 1#
 2# QLogic network device configuration
 3#
 4
 5config NET_VENDOR_QLOGIC
 6	bool "QLogic devices"
 7	default y
 8	depends on PCI
 9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y
11	  and read the Ethernet-HOWTO, available from
12	  <http://www.tldp.org/docs.html#howto>.
13
14	  Note that the answer to this question doesn't directly affect the
15	  kernel: saying N will just cause the configurator to skip all
16	  the questions about QLogic cards. If you say Y, you will be asked for
17	  your specific card in the following questions.
18
19if NET_VENDOR_QLOGIC
20
21config QLA3XXX
22	tristate "QLogic QLA3XXX Network Driver Support"
23	depends on PCI
24	---help---
25	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
26
27	  To compile this driver as a module, choose M here: the module
28	  will be called qla3xxx.
29
30config QLCNIC
31	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
32	depends on PCI
33	select FW_LOADER
34	---help---
35	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
36	  devices.
37
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
38config QLGE
39	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
40	depends on PCI
41	---help---
42	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
43
44	  To compile this driver as a module, choose M here: the module
45	  will be called qlge.
46
47config NETXEN_NIC
48	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
49	depends on PCI
50	select FW_LOADER
51	---help---
52	  This enables the support for NetXen's Gigabit Ethernet card.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
53
54endif # NET_VENDOR_QLOGIC