1/*
  2 * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
  3 *
  4 * Copyright 2011 Freescale Semiconductor Inc.
  5 *
  6 * Redistribution and use in source and binary forms, with or without
  7 * modification, are permitted provided that the following conditions are met:
  8 *     * Redistributions of source code must retain the above copyright
  9 *       notice, this list of conditions and the following disclaimer.
 10 *     * Redistributions in binary form must reproduce the above copyright
 11 *       notice, this list of conditions and the following disclaimer in the
 12 *       documentation and/or other materials provided with the distribution.
 13 *     * Neither the name of Freescale Semiconductor nor the
 14 *       names of its contributors may be used to endorse or promote products
 15 *       derived from this software without specific prior written permission.
 16 *
 17 *
 18 * ALTERNATIVELY, this software may be distributed under the terms of the
 19 * GNU General Public License ("GPL") as published by the Free Software
 20 * Foundation, either version 2 of that License or (at your option) any
 21 * later version.
 22 *
 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 33 */
 34
 35&lbc {
 36	nor@0,0 {
 37		#address-cells = <1>;
 38		#size-cells = <1>;
 39		compatible = "cfi-flash";
 40		reg = <0x0 0x0 0x8000000>;
 41		bank-width = <2>;
 42		device-width = <1>;
 43
 44		partition@0 {
 45			reg = <0x0 0x03000000>;
 46			label = "ramdisk-nor";
 47		};
 48
 49		partition@3000000 {
 50			reg = <0x03000000 0x00e00000>;
 51			label = "diagnostic-nor";
 52			read-only;
 53		};
 54
 55		partition@3e00000 {
 56			reg = <0x03e00000 0x00200000>;
 57			label = "dink-nor";
 58			read-only;
 59		};
 60
 61		partition@4000000 {
 62			reg = <0x04000000 0x00400000>;
 63			label = "kernel-nor";
 64		};
 65
 66		partition@4400000 {
 67			reg = <0x04400000 0x03b00000>;
 68			label = "fs-nor";
 69		};
 70
 71		partition@7f00000 {
 72			reg = <0x07f00000 0x00080000>;
 73			label = "dtb-nor";
 74		};
 75
 76		partition@7f80000 {
 77			reg = <0x07f80000 0x00080000>;
 78			label = "u-boot-nor";
 79			read-only;
 80		};
 81	};
 82
 83	nand@2,0 {
 84		#address-cells = <1>;
 85		#size-cells = <1>;
 86		compatible = "fsl,mpc8536-fcm-nand",
 87			     "fsl,elbc-fcm-nand";
 88		reg = <0x2 0x0 0x40000>;
 89
 90		partition@0 {
 91			reg = <0x0 0x02000000>;
 92			label = "u-boot-nand";
 93			read-only;
 94		};
 95
 96		partition@2000000 {
 97			reg = <0x02000000 0x10000000>;
 98			label = "fs-nand";
 99		};
100
101		partition@12000000 {
102			reg = <0x12000000 0x08000000>;
103			label = "ramdisk-nand";
104		};
105
106		partition@1a000000 {
107			reg = <0x1a000000 0x04000000>;
108			label = "kernel-nand";
109		};
110
111		partition@1e000000 {
112			reg = <0x1e000000 0x01000000>;
113			label = "dtb-nand";
114		};
115
116		partition@1f000000 {
117			reg = <0x1f000000 0x21000000>;
118			label = "empty-nand";
119		};
120	};
121
122	board-control@3,0 {
123		compatible = "fsl,mpc8536ds-fpga-pixis";
124		reg = <0x3 0x0 0x8000>;
125	};
126};
127
128&board_soc {
129	i2c@3100 {
130		rtc@68 {
131			compatible = "dallas,ds3232";
132			reg = <0x68>;
133			interrupts = <0 0x1 0 0>;
134		};
135	};
136
137	spi@7000 {
138		flash@0 {
139			#address-cells = <1>;
140			#size-cells = <1>;
141			compatible = "spansion,s25sl12801";
142			reg = <0>;
143			spi-max-frequency = <40000000>;
144			partition@u-boot {
145				label = "u-boot";
146				reg = <0x00000000 0x00100000>;
147				read-only;
148			};
149			partition@kernel {
150				label = "kernel";
151				reg = <0x00100000 0x00500000>;
152				read-only;
153			};
154			partition@dtb {
155				label = "dtb";
156				reg = <0x00600000 0x00100000>;
157				read-only;
158			};
159			partition@fs {
160				label = "file system";
161				reg = <0x00700000 0x00900000>;
162			};
163		};
164		flash@1 {
165			compatible = "spansion,s25sl12801";
166			reg = <1>;
167			spi-max-frequency = <40000000>;
168		};
169		flash@2 {
170			compatible = "spansion,s25sl12801";
171			reg = <2>;
172			spi-max-frequency = <40000000>;
173		};
174		flash@3 {
175			compatible = "spansion,s25sl12801";
176			reg = <3>;
177			spi-max-frequency = <40000000>;
178		};
179	};
180
181	usb@22000 {
182		phy_type = "ulpi";
183	};
184
185	usb@23000 {
186		phy_type = "ulpi";
187	};
188
189	enet0: ethernet@24000 {
190		tbi-handle = <&tbi0>;
191		phy-handle = <&phy1>;
192		phy-connection-type = "rgmii-id";
193	};
194
195	mdio@24520 {
196		phy0: ethernet-phy@0 {
197			interrupts = <10 0x1 0 0>;
198			reg = <0>;
199			device_type = "ethernet-phy";
200		};
201		phy1: ethernet-phy@1 {
202			interrupts = <10 0x1 0 0>;
203			reg = <1>;
204			device_type = "ethernet-phy";
205		};
206		tbi0: tbi-phy@11 {
207			reg = <0x11>;
208			device_type = "tbi-phy";
209		};
210	};
211
212	enet2: ethernet@26000 {
213		tbi-handle = <&tbi1>;
214		phy-handle = <&phy0>;
215		phy-connection-type = "rgmii-id";
216	};
217
218	mdio@26520 {
219		#address-cells = <1>;
220		#size-cells = <0>;
221		compatible = "fsl,gianfar-tbi";
222		reg = <0x26520 0x20>;
223
224		tbi1: tbi-phy@11 {
225			reg = <0x11>;
226			device_type = "tbi-phy";
227		};
228	};
229
230	usb@2b000 {
231		dr_mode = "peripheral";
232		phy_type = "ulpi";
233	};
234};