1/*
  2 * Copyright 2011 Freescale Semiconductor, Inc.
  3 * Copyright 2011 Linaro Ltd.
  4 *
  5 * The code contained herein is licensed under the GNU General Public
  6 * License. You may obtain a copy of the GNU General Public License
  7 * Version 2 or later at the following locations:
  8 *
  9 * http://www.opensource.org/licenses/gpl-license.html
 10 * http://www.gnu.org/copyleft/gpl.html
 11 */
 12
 13/dts-v1/;
 14/include/ "imx53.dtsi"
 15
 16/ {
 17	model = "Freescale i.MX53 Evaluation Kit";
 18	compatible = "fsl,imx53-evk", "fsl,imx53";
 19
 20	memory {
 21		reg = <0x70000000 0x80000000>;
 22	};
 23
 24	soc {
 25		aips@50000000 { /* AIPS1 */
 26			spba@50000000 {
 27				esdhc@50004000 { /* ESDHC1 */
 28					cd-gpios = <&gpio3 13 0>;
 29					wp-gpios = <&gpio3 14 0>;
 30					status = "okay";
 31				};
 32
 33				ecspi@50010000 { /* ECSPI1 */
 34					fsl,spi-num-chipselects = <2>;
 35					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
 36					status = "okay";
 37
 38					flash: at45db321d@1 {
 39						#address-cells = <1>;
 40						#size-cells = <1>;
 41						compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
 42						spi-max-frequency = <25000000>;
 43						reg = <1>;
 44
 45						partition@0 {
 46							label = "U-Boot";
 47							reg = <0x0 0x40000>;
 48							read-only;
 49						};
 50
 51						partition@40000 {
 52							label = "Kernel";
 53							reg = <0x40000 0x3c0000>;
 54						};
 55					};
 56				};
 57
 58				esdhc@50020000 { /* ESDHC3 */
 59					cd-gpios = <&gpio3 11 0>;
 60					wp-gpios = <&gpio3 12 0>;
 61					status = "okay";
 62				};
 63			};
 64
 65			wdog@53f98000 { /* WDOG1 */
 66				status = "okay";
 67			};
 68
 69			iomuxc@53fa8000 {
 70				compatible = "fsl,imx53-iomuxc-evk";
 71				reg = <0x53fa8000 0x4000>;
 72			};
 73
 74			uart1: serial@53fbc000 {
 75				status = "okay";
 76			};
 77		};
 78
 79		aips@60000000 {	/* AIPS2 */
 80			sdma@63fb0000 {
 81				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 82			};
 83
 84			i2c@63fc4000 { /* I2C2 */
 85				status = "okay";
 86
 87				pmic: mc13892@08 {
 88					compatible = "fsl,mc13892", "fsl,mc13xxx";
 89					reg = <0x08>;
 90				};
 91
 92				codec: sgtl5000@0a {
 93					compatible = "fsl,sgtl5000";
 94					reg = <0x0a>;
 95				};
 96			};
 97
 98			ethernet@63fec000 {
 99				phy-mode = "rmii";
100				phy-reset-gpios = <&gpio7 6 0>;
101				status = "okay";
102			};
103		};
104	};
105
106	leds {
107		compatible = "gpio-leds";
108
109		green {
110			label = "Heartbeat";
111			gpios = <&gpio7 7 0>;
112			linux,default-trigger = "heartbeat";
113		};
114	};
115};