1/*
 2 * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
 3 *
 4 *  Copyright (C) 2012 Atmel,
 5 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
 6 *
 7 * Licensed under GPLv2 or later.
 8 */
 9/dts-v1/;
10#include "at91sam9g25.dtsi"
11#include "at91sam9x5ek.dtsi"
12
13/ {
14	model = "Atmel AT91SAM9G25-EK";
15	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
16
 
 
 
 
17	ahb {
18		apb {
19			spi0: spi@f0000000 {
20				status = "disabled";
21			};
22
23			mmc1: mmc@f000c000 {
24				status = "disabled";
25			};
26
27			i2c0: i2c@f8010000 {
28				ov2640: camera@30 {
29					compatible = "ovti,ov2640";
30					reg = <0x30>;
31					pinctrl-names = "default";
32					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
33					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
34					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
35					clocks = <&pck0>;
36					clock-names = "xvclk";
37					assigned-clocks = <&pck0>;
38					assigned-clock-rates = <25000000>;
39					status = "okay";
40
41					port {
42						ov2640_0: endpoint {
43							remote-endpoint = <&isi_0>;
44							bus-width = <8>;
45						};
46					};
47				};
48			};
49
50			macb0: ethernet@f802c000 {
51				phy-mode = "rmii";
52				status = "okay";
53			};
 
54
55			isi: isi@f8048000 {
56				status = "okay";
57				port {
58					isi_0: endpoint@0 {
59						reg = <0>;
60						remote-endpoint = <&ov2640_0>;
61						bus-width = <8>;
62						vsync-active = <1>;
63						hsync-active = <1>;
64					};
65				};
66			};
67		};
68	};
69};

 1/*
 2 * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
 3 *
 4 *  Copyright (C) 2012 Atmel,
 5 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
 6 *
 7 * Licensed under GPLv2 or later.
 8 */
 9/dts-v1/;
10/include/ "at91sam9x5.dtsi"
11/include/ "at91sam9x5cm.dtsi"
12
13/ {
14	model = "Atmel AT91SAM9G25-EK";
15	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
16
17	chosen {
18		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
19	};
20
21	ahb {
22		apb {
23			dbgu: serial@fffff200 {
24				status = "okay";
 
 
 
 
25			};
26
27			usart0: serial@f801c000 {
28				status = "okay";
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
29			};
30
31			macb0: ethernet@f802c000 {
32				phy-mode = "rmii";
33				status = "okay";
34			};
35		};
36
37		usb0: ohci@00600000 {
38			status = "okay";
39			num-ports = <2>;
40			atmel,vbus-gpio = <&pioD 19 1
41					   &pioD 20 1
42					  >;
43		};
44
45		usb1: ehci@00700000 {
46			status = "okay";
 
 
47		};
48	};
49};