Linux Audio

Check our new training course

Loading...
Note: File does not exist in v4.17.
  1/*********************************************************************
  2 *
  3 * Filename:      qos.c
  4 * Version:       1.0
  5 * Description:   IrLAP QoS parameter negotiation
  6 * Status:        Stable
  7 * Author:        Dag Brattli <dagb@cs.uit.no>
  8 * Created at:    Tue Sep  9 00:00:26 1997
  9 * Modified at:   Sun Jan 30 14:29:16 2000
 10 * Modified by:   Dag Brattli <dagb@cs.uit.no>
 11 *
 12 *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>,
 13 *     All Rights Reserved.
 14 *     Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com>
 15 *
 16 *     This program is free software; you can redistribute it and/or
 17 *     modify it under the terms of the GNU General Public License as
 18 *     published by the Free Software Foundation; either version 2 of
 19 *     the License, or (at your option) any later version.
 20 *
 21 *     This program is distributed in the hope that it will be useful,
 22 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 23 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 24 *     GNU General Public License for more details.
 25 *
 26 *     You should have received a copy of the GNU General Public License
 27 *     along with this program; if not, write to the Free Software
 28 *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 29 *     MA 02111-1307 USA
 30 *
 31 ********************************************************************/
 32
 33#include <linux/export.h>
 34
 35#include <asm/byteorder.h>
 36
 37#include <net/irda/irda.h>
 38#include <net/irda/parameters.h>
 39#include <net/irda/qos.h>
 40#include <net/irda/irlap.h>
 41#include <net/irda/irlap_frame.h>
 42
 43/*
 44 * Maximum values of the baud rate we negotiate with the other end.
 45 * Most often, you don't have to change that, because Linux-IrDA will
 46 * use the maximum offered by the link layer, which usually works fine.
 47 * In some very rare cases, you may want to limit it to lower speeds...
 48 */
 49int sysctl_max_baud_rate = 16000000;
 50/*
 51 * Maximum value of the lap disconnect timer we negotiate with the other end.
 52 * Most often, the value below represent the best compromise, but some user
 53 * may want to keep the LAP alive longer or shorter in case of link failure.
 54 * Remember that the threshold time (early warning) is fixed to 3s...
 55 */
 56int sysctl_max_noreply_time = 12;
 57/*
 58 * Minimum turn time to be applied before transmitting to the peer.
 59 * Nonzero values (usec) are used as lower limit to the per-connection
 60 * mtt value which was announced by the other end during negotiation.
 61 * Might be helpful if the peer device provides too short mtt.
 62 * Default is 10us which means using the unmodified value given by the
 63 * peer except if it's 0 (0 is likely a bug in the other stack).
 64 */
 65unsigned int sysctl_min_tx_turn_time = 10;
 66/*
 67 * Maximum data size to be used in transmission in payload of LAP frame.
 68 * There is a bit of confusion in the IrDA spec :
 69 * The LAP spec defines the payload of a LAP frame (I field) to be
 70 * 2048 bytes max (IrLAP 1.1, chapt 6.6.5, p40).
 71 * On the other hand, the PHY mention frames of 2048 bytes max (IrPHY
 72 * 1.2, chapt 5.3.2.1, p41). But, this number includes the LAP header
 73 * (2 bytes), and CRC (32 bits at 4 Mb/s). So, for the I field (LAP
 74 * payload), that's only 2042 bytes. Oups !
 75 * My nsc-ircc hardware has troubles receiving 2048 bytes frames at 4 Mb/s,
 76 * so adjust to 2042... I don't know if this bug applies only for 2048
 77 * bytes frames or all negotiated frame sizes, but you can use the sysctl
 78 * to play with this value anyway.
 79 * Jean II */
 80unsigned int sysctl_max_tx_data_size = 2042;
 81/*
 82 * Maximum transmit window, i.e. number of LAP frames between turn-around.
 83 * This allow to override what the peer told us. Some peers are buggy and
 84 * don't always support what they tell us.
 85 * Jean II */
 86unsigned int sysctl_max_tx_window = 7;
 87
 88static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get);
 89static int irlap_param_link_disconnect(void *instance, irda_param_t *parm,
 90				       int get);
 91static int irlap_param_max_turn_time(void *instance, irda_param_t *param,
 92				     int get);
 93static int irlap_param_data_size(void *instance, irda_param_t *param, int get);
 94static int irlap_param_window_size(void *instance, irda_param_t *param,
 95				   int get);
 96static int irlap_param_additional_bofs(void *instance, irda_param_t *parm,
 97				       int get);
 98static int irlap_param_min_turn_time(void *instance, irda_param_t *param,
 99				     int get);
100
101#ifndef CONFIG_IRDA_DYNAMIC_WINDOW
102static __u32 irlap_requested_line_capacity(struct qos_info *qos);
103#endif
104
105static __u32 min_turn_times[]  = { 10000, 5000, 1000, 500, 100, 50, 10, 0 }; /* us */
106static __u32 baud_rates[]      = { 2400, 9600, 19200, 38400, 57600, 115200, 576000,
107				   1152000, 4000000, 16000000 };           /* bps */
108static __u32 data_sizes[]      = { 64, 128, 256, 512, 1024, 2048 };        /* bytes */
109static __u32 add_bofs[]        = { 48, 24, 12, 5, 3, 2, 1, 0 };            /* bytes */
110static __u32 max_turn_times[]  = { 500, 250, 100, 50 };                    /* ms */
111static __u32 link_disc_times[] = { 3, 8, 12, 16, 20, 25, 30, 40 };         /* secs */
112
113static __u32 max_line_capacities[10][4] = {
114       /* 500 ms     250 ms  100 ms  50 ms (max turn time) */
115	{    100,      0,      0,     0 }, /*     2400 bps */
116	{    400,      0,      0,     0 }, /*     9600 bps */
117	{    800,      0,      0,     0 }, /*    19200 bps */
118	{   1600,      0,      0,     0 }, /*    38400 bps */
119	{   2360,      0,      0,     0 }, /*    57600 bps */
120	{   4800,   2400,    960,   480 }, /*   115200 bps */
121	{  28800,  11520,   5760,  2880 }, /*   576000 bps */
122	{  57600,  28800,  11520,  5760 }, /*  1152000 bps */
123	{ 200000, 100000,  40000, 20000 }, /*  4000000 bps */
124	{ 800000, 400000, 160000, 80000 }, /* 16000000 bps */
125};
126
127static pi_minor_info_t pi_minor_call_table_type_0[] = {
128	{ NULL, 0 },
129/* 01 */{ irlap_param_baud_rate,       PV_INTEGER | PV_LITTLE_ENDIAN },
130	{ NULL, 0 },
131	{ NULL, 0 },
132	{ NULL, 0 },
133	{ NULL, 0 },
134	{ NULL, 0 },
135	{ NULL, 0 },
136/* 08 */{ irlap_param_link_disconnect, PV_INT_8_BITS }
137};
138
139static pi_minor_info_t pi_minor_call_table_type_1[] = {
140	{ NULL, 0 },
141	{ NULL, 0 },
142/* 82 */{ irlap_param_max_turn_time,   PV_INT_8_BITS },
143/* 83 */{ irlap_param_data_size,       PV_INT_8_BITS },
144/* 84 */{ irlap_param_window_size,     PV_INT_8_BITS },
145/* 85 */{ irlap_param_additional_bofs, PV_INT_8_BITS },
146/* 86 */{ irlap_param_min_turn_time,   PV_INT_8_BITS },
147};
148
149static pi_major_info_t pi_major_call_table[] = {
150	{ pi_minor_call_table_type_0, 9 },
151	{ pi_minor_call_table_type_1, 7 },
152};
153
154static pi_param_info_t irlap_param_info = { pi_major_call_table, 2, 0x7f, 7 };
155
156/* ---------------------- LOCAL SUBROUTINES ---------------------- */
157/* Note : we start with a bunch of local subroutines.
158 * As the compiler is "one pass", this is the only way to get them to
159 * inline properly...
160 * Jean II
161 */
162/*
163 * Function value_index (value, array, size)
164 *
165 *    Returns the index to the value in the specified array
166 */
167static inline int value_index(__u32 value, __u32 *array, int size)
168{
169	int i;
170
171	for (i=0; i < size; i++)
172		if (array[i] == value)
173			break;
174	return i;
175}
176
177/*
178 * Function index_value (index, array)
179 *
180 *    Returns value to index in array, easy!
181 *
182 */
183static inline __u32 index_value(int index, __u32 *array)
184{
185	return array[index];
186}
187
188/*
189 * Function msb_index (word)
190 *
191 *    Returns index to most significant bit (MSB) in word
192 *
193 */
194static int msb_index (__u16 word)
195{
196	__u16 msb = 0x8000;
197	int index = 15;   /* Current MSB */
198
199	/* Check for buggy peers.
200	 * Note : there is a small probability that it could be us, but I
201	 * would expect driver authors to catch that pretty early and be
202	 * able to check precisely what's going on. If a end user sees this,
203	 * it's very likely the peer. - Jean II */
204	if (word == 0) {
205		IRDA_WARNING("%s(), Detected buggy peer, adjust null PV to 0x1!\n",
206			 __func__);
207		/* The only safe choice (we don't know the array size) */
208		word = 0x1;
209	}
210
211	while (msb) {
212		if (word & msb)
213			break;   /* Found it! */
214		msb >>=1;
215		index--;
216	}
217	return index;
218}
219
220/*
221 * Function value_lower_bits (value, array)
222 *
223 *    Returns a bit field marking all possibility lower than value.
224 */
225static inline int value_lower_bits(__u32 value, __u32 *array, int size, __u16 *field)
226{
227	int	i;
228	__u16	mask = 0x1;
229	__u16	result = 0x0;
230
231	for (i=0; i < size; i++) {
232		/* Add the current value to the bit field, shift mask */
233		result |= mask;
234		mask <<= 1;
235		/* Finished ? */
236		if (array[i] >= value)
237			break;
238	}
239	/* Send back a valid index */
240	if(i >= size)
241	  i = size - 1;	/* Last item */
242	*field = result;
243	return i;
244}
245
246/*
247 * Function value_highest_bit (value, array)
248 *
249 *    Returns a bit field marking the highest possibility lower than value.
250 */
251static inline int value_highest_bit(__u32 value, __u32 *array, int size, __u16 *field)
252{
253	int	i;
254	__u16	mask = 0x1;
255	__u16	result = 0x0;
256
257	for (i=0; i < size; i++) {
258		/* Finished ? */
259		if (array[i] <= value)
260			break;
261		/* Shift mask */
262		mask <<= 1;
263	}
264	/* Set the current value to the bit field */
265	result |= mask;
266	/* Send back a valid index */
267	if(i >= size)
268	  i = size - 1;	/* Last item */
269	*field = result;
270	return i;
271}
272
273/* -------------------------- MAIN CALLS -------------------------- */
274
275/*
276 * Function irda_qos_compute_intersection (qos, new)
277 *
278 *    Compute the intersection of the old QoS capabilities with new ones
279 *
280 */
281void irda_qos_compute_intersection(struct qos_info *qos, struct qos_info *new)
282{
283	IRDA_ASSERT(qos != NULL, return;);
284	IRDA_ASSERT(new != NULL, return;);
285
286	/* Apply */
287	qos->baud_rate.bits       &= new->baud_rate.bits;
288	qos->window_size.bits     &= new->window_size.bits;
289	qos->min_turn_time.bits   &= new->min_turn_time.bits;
290	qos->max_turn_time.bits   &= new->max_turn_time.bits;
291	qos->data_size.bits       &= new->data_size.bits;
292	qos->link_disc_time.bits  &= new->link_disc_time.bits;
293	qos->additional_bofs.bits &= new->additional_bofs.bits;
294
295	irda_qos_bits_to_value(qos);
296}
297
298/*
299 * Function irda_init_max_qos_capabilies (qos)
300 *
301 *    The purpose of this function is for layers and drivers to be able to
302 *    set the maximum QoS possible and then "and in" their own limitations
303 *
304 */
305void irda_init_max_qos_capabilies(struct qos_info *qos)
306{
307	int i;
308	/*
309	 *  These are the maximum supported values as specified on pages
310	 *  39-43 in IrLAP
311	 */
312
313	/* Use sysctl to set some configurable values... */
314	/* Set configured max speed */
315	i = value_lower_bits(sysctl_max_baud_rate, baud_rates, 10,
316			     &qos->baud_rate.bits);
317	sysctl_max_baud_rate = index_value(i, baud_rates);
318
319	/* Set configured max disc time */
320	i = value_lower_bits(sysctl_max_noreply_time, link_disc_times, 8,
321			     &qos->link_disc_time.bits);
322	sysctl_max_noreply_time = index_value(i, link_disc_times);
323
324	/* LSB is first byte, MSB is second byte */
325	qos->baud_rate.bits    &= 0x03ff;
326
327	qos->window_size.bits     = 0x7f;
328	qos->min_turn_time.bits   = 0xff;
329	qos->max_turn_time.bits   = 0x0f;
330	qos->data_size.bits       = 0x3f;
331	qos->link_disc_time.bits &= 0xff;
332	qos->additional_bofs.bits = 0xff;
333}
334EXPORT_SYMBOL(irda_init_max_qos_capabilies);
335
336/*
337 * Function irlap_adjust_qos_settings (qos)
338 *
339 *     Adjust QoS settings in case some values are not possible to use because
340 *     of other settings
341 */
342static void irlap_adjust_qos_settings(struct qos_info *qos)
343{
344	__u32 line_capacity;
345	int index;
346
347	IRDA_DEBUG(2, "%s()\n", __func__);
348
349	/*
350	 * Make sure the mintt is sensible.
351	 * Main culprit : Ericsson T39. - Jean II
352	 */
353	if (sysctl_min_tx_turn_time > qos->min_turn_time.value) {
354		int i;
355
356		IRDA_WARNING("%s(), Detected buggy peer, adjust mtt to %dus!\n",
357			 __func__, sysctl_min_tx_turn_time);
358
359		/* We don't really need bits, but easier this way */
360		i = value_highest_bit(sysctl_min_tx_turn_time, min_turn_times,
361				      8, &qos->min_turn_time.bits);
362		sysctl_min_tx_turn_time = index_value(i, min_turn_times);
363		qos->min_turn_time.value = sysctl_min_tx_turn_time;
364	}
365
366	/*
367	 * Not allowed to use a max turn time less than 500 ms if the baudrate
368	 * is less than 115200
369	 */
370	if ((qos->baud_rate.value < 115200) &&
371	    (qos->max_turn_time.value < 500))
372	{
373		IRDA_DEBUG(0,
374			   "%s(), adjusting max turn time from %d to 500 ms\n",
375			   __func__, qos->max_turn_time.value);
376		qos->max_turn_time.value = 500;
377	}
378
379	/*
380	 * The data size must be adjusted according to the baud rate and max
381	 * turn time
382	 */
383	index = value_index(qos->data_size.value, data_sizes, 6);
384	line_capacity = irlap_max_line_capacity(qos->baud_rate.value,
385						qos->max_turn_time.value);
386
387#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
388	while ((qos->data_size.value > line_capacity) && (index > 0)) {
389		qos->data_size.value = data_sizes[index--];
390		IRDA_DEBUG(2, "%s(), reducing data size to %d\n",
391			   __func__, qos->data_size.value);
392	}
393#else /* Use method described in section 6.6.11 of IrLAP */
394	while (irlap_requested_line_capacity(qos) > line_capacity) {
395		IRDA_ASSERT(index != 0, return;);
396
397		/* Must be able to send at least one frame */
398		if (qos->window_size.value > 1) {
399			qos->window_size.value--;
400			IRDA_DEBUG(2, "%s(), reducing window size to %d\n",
401				   __func__, qos->window_size.value);
402		} else if (index > 1) {
403			qos->data_size.value = data_sizes[index--];
404			IRDA_DEBUG(2, "%s(), reducing data size to %d\n",
405				   __func__, qos->data_size.value);
406		} else {
407			IRDA_WARNING("%s(), nothing more we can do!\n",
408				     __func__);
409		}
410	}
411#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
412	/*
413	 * Fix tx data size according to user limits - Jean II
414	 */
415	if (qos->data_size.value > sysctl_max_tx_data_size)
416		/* Allow non discrete adjustement to avoid losing capacity */
417		qos->data_size.value = sysctl_max_tx_data_size;
418	/*
419	 * Override Tx window if user request it. - Jean II
420	 */
421	if (qos->window_size.value > sysctl_max_tx_window)
422		qos->window_size.value = sysctl_max_tx_window;
423}
424
425/*
426 * Function irlap_negotiate (qos_device, qos_session, skb)
427 *
428 *    Negotiate QoS values, not really that much negotiation :-)
429 *    We just set the QoS capabilities for the peer station
430 *
431 */
432int irlap_qos_negotiate(struct irlap_cb *self, struct sk_buff *skb)
433{
434	int ret;
435
436	ret = irda_param_extract_all(self, skb->data, skb->len,
437				     &irlap_param_info);
438
439	/* Convert the negotiated bits to values */
440	irda_qos_bits_to_value(&self->qos_tx);
441	irda_qos_bits_to_value(&self->qos_rx);
442
443	irlap_adjust_qos_settings(&self->qos_tx);
444
445	IRDA_DEBUG(2, "Setting BAUD_RATE to %d bps.\n",
446		   self->qos_tx.baud_rate.value);
447	IRDA_DEBUG(2, "Setting DATA_SIZE to %d bytes\n",
448		   self->qos_tx.data_size.value);
449	IRDA_DEBUG(2, "Setting WINDOW_SIZE to %d\n",
450		   self->qos_tx.window_size.value);
451	IRDA_DEBUG(2, "Setting XBOFS to %d\n",
452		   self->qos_tx.additional_bofs.value);
453	IRDA_DEBUG(2, "Setting MAX_TURN_TIME to %d ms.\n",
454		   self->qos_tx.max_turn_time.value);
455	IRDA_DEBUG(2, "Setting MIN_TURN_TIME to %d usecs.\n",
456		   self->qos_tx.min_turn_time.value);
457	IRDA_DEBUG(2, "Setting LINK_DISC to %d secs.\n",
458		   self->qos_tx.link_disc_time.value);
459	return ret;
460}
461
462/*
463 * Function irlap_insert_negotiation_params (qos, fp)
464 *
465 *    Insert QoS negotiaion pararameters into frame
466 *
467 */
468int irlap_insert_qos_negotiation_params(struct irlap_cb *self,
469					struct sk_buff *skb)
470{
471	int ret;
472
473	/* Insert data rate */
474	ret = irda_param_insert(self, PI_BAUD_RATE, skb_tail_pointer(skb),
475				skb_tailroom(skb), &irlap_param_info);
476	if (ret < 0)
477		return ret;
478	skb_put(skb, ret);
479
480	/* Insert max turnaround time */
481	ret = irda_param_insert(self, PI_MAX_TURN_TIME, skb_tail_pointer(skb),
482				skb_tailroom(skb), &irlap_param_info);
483	if (ret < 0)
484		return ret;
485	skb_put(skb, ret);
486
487	/* Insert data size */
488	ret = irda_param_insert(self, PI_DATA_SIZE, skb_tail_pointer(skb),
489				skb_tailroom(skb), &irlap_param_info);
490	if (ret < 0)
491		return ret;
492	skb_put(skb, ret);
493
494	/* Insert window size */
495	ret = irda_param_insert(self, PI_WINDOW_SIZE, skb_tail_pointer(skb),
496				skb_tailroom(skb), &irlap_param_info);
497	if (ret < 0)
498		return ret;
499	skb_put(skb, ret);
500
501	/* Insert additional BOFs */
502	ret = irda_param_insert(self, PI_ADD_BOFS, skb_tail_pointer(skb),
503				skb_tailroom(skb), &irlap_param_info);
504	if (ret < 0)
505		return ret;
506	skb_put(skb, ret);
507
508	/* Insert minimum turnaround time */
509	ret = irda_param_insert(self, PI_MIN_TURN_TIME, skb_tail_pointer(skb),
510				skb_tailroom(skb), &irlap_param_info);
511	if (ret < 0)
512		return ret;
513	skb_put(skb, ret);
514
515	/* Insert link disconnect/threshold time */
516	ret = irda_param_insert(self, PI_LINK_DISC, skb_tail_pointer(skb),
517				skb_tailroom(skb), &irlap_param_info);
518	if (ret < 0)
519		return ret;
520	skb_put(skb, ret);
521
522	return 0;
523}
524
525/*
526 * Function irlap_param_baud_rate (instance, param, get)
527 *
528 *    Negotiate data-rate
529 *
530 */
531static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get)
532{
533	__u16 final;
534
535	struct irlap_cb *self = (struct irlap_cb *) instance;
536
537	IRDA_ASSERT(self != NULL, return -1;);
538	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
539
540	if (get) {
541		param->pv.i = self->qos_rx.baud_rate.bits;
542		IRDA_DEBUG(2, "%s(), baud rate = 0x%02x\n",
543			   __func__, param->pv.i);
544	} else {
545		/*
546		 *  Stations must agree on baud rate, so calculate
547		 *  intersection
548		 */
549		IRDA_DEBUG(2, "Requested BAUD_RATE: 0x%04x\n", (__u16) param->pv.i);
550		final = (__u16) param->pv.i & self->qos_rx.baud_rate.bits;
551
552		IRDA_DEBUG(2, "Final BAUD_RATE: 0x%04x\n", final);
553		self->qos_tx.baud_rate.bits = final;
554		self->qos_rx.baud_rate.bits = final;
555	}
556
557	return 0;
558}
559
560/*
561 * Function irlap_param_link_disconnect (instance, param, get)
562 *
563 *    Negotiate link disconnect/threshold time.
564 *
565 */
566static int irlap_param_link_disconnect(void *instance, irda_param_t *param,
567				       int get)
568{
569	__u16 final;
570
571	struct irlap_cb *self = (struct irlap_cb *) instance;
572
573	IRDA_ASSERT(self != NULL, return -1;);
574	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
575
576	if (get)
577		param->pv.i = self->qos_rx.link_disc_time.bits;
578	else {
579		/*
580		 *  Stations must agree on link disconnect/threshold
581		 *  time.
582		 */
583		IRDA_DEBUG(2, "LINK_DISC: %02x\n", (__u8) param->pv.i);
584		final = (__u8) param->pv.i & self->qos_rx.link_disc_time.bits;
585
586		IRDA_DEBUG(2, "Final LINK_DISC: %02x\n", final);
587		self->qos_tx.link_disc_time.bits = final;
588		self->qos_rx.link_disc_time.bits = final;
589	}
590	return 0;
591}
592
593/*
594 * Function irlap_param_max_turn_time (instance, param, get)
595 *
596 *    Negotiate the maximum turnaround time. This is a type 1 parameter and
597 *    will be negotiated independently for each station
598 *
599 */
600static int irlap_param_max_turn_time(void *instance, irda_param_t *param,
601				     int get)
602{
603	struct irlap_cb *self = (struct irlap_cb *) instance;
604
605	IRDA_ASSERT(self != NULL, return -1;);
606	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
607
608	if (get)
609		param->pv.i = self->qos_rx.max_turn_time.bits;
610	else
611		self->qos_tx.max_turn_time.bits = (__u8) param->pv.i;
612
613	return 0;
614}
615
616/*
617 * Function irlap_param_data_size (instance, param, get)
618 *
619 *    Negotiate the data size. This is a type 1 parameter and
620 *    will be negotiated independently for each station
621 *
622 */
623static int irlap_param_data_size(void *instance, irda_param_t *param, int get)
624{
625	struct irlap_cb *self = (struct irlap_cb *) instance;
626
627	IRDA_ASSERT(self != NULL, return -1;);
628	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
629
630	if (get)
631		param->pv.i = self->qos_rx.data_size.bits;
632	else
633		self->qos_tx.data_size.bits = (__u8) param->pv.i;
634
635	return 0;
636}
637
638/*
639 * Function irlap_param_window_size (instance, param, get)
640 *
641 *    Negotiate the window size. This is a type 1 parameter and
642 *    will be negotiated independently for each station
643 *
644 */
645static int irlap_param_window_size(void *instance, irda_param_t *param,
646				   int get)
647{
648	struct irlap_cb *self = (struct irlap_cb *) instance;
649
650	IRDA_ASSERT(self != NULL, return -1;);
651	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
652
653	if (get)
654		param->pv.i = self->qos_rx.window_size.bits;
655	else
656		self->qos_tx.window_size.bits = (__u8) param->pv.i;
657
658	return 0;
659}
660
661/*
662 * Function irlap_param_additional_bofs (instance, param, get)
663 *
664 *    Negotiate additional BOF characters. This is a type 1 parameter and
665 *    will be negotiated independently for each station.
666 */
667static int irlap_param_additional_bofs(void *instance, irda_param_t *param, int get)
668{
669	struct irlap_cb *self = (struct irlap_cb *) instance;
670
671	IRDA_ASSERT(self != NULL, return -1;);
672	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
673
674	if (get)
675		param->pv.i = self->qos_rx.additional_bofs.bits;
676	else
677		self->qos_tx.additional_bofs.bits = (__u8) param->pv.i;
678
679	return 0;
680}
681
682/*
683 * Function irlap_param_min_turn_time (instance, param, get)
684 *
685 *    Negotiate the minimum turn around time. This is a type 1 parameter and
686 *    will be negotiated independently for each station
687 */
688static int irlap_param_min_turn_time(void *instance, irda_param_t *param,
689				     int get)
690{
691	struct irlap_cb *self = (struct irlap_cb *) instance;
692
693	IRDA_ASSERT(self != NULL, return -1;);
694	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
695
696	if (get)
697		param->pv.i = self->qos_rx.min_turn_time.bits;
698	else
699		self->qos_tx.min_turn_time.bits = (__u8) param->pv.i;
700
701	return 0;
702}
703
704/*
705 * Function irlap_max_line_capacity (speed, max_turn_time, min_turn_time)
706 *
707 *    Calculate the maximum line capacity
708 *
709 */
710__u32 irlap_max_line_capacity(__u32 speed, __u32 max_turn_time)
711{
712	__u32 line_capacity;
713	int i,j;
714
715	IRDA_DEBUG(2, "%s(), speed=%d, max_turn_time=%d\n",
716		   __func__, speed, max_turn_time);
717
718	i = value_index(speed, baud_rates, 10);
719	j = value_index(max_turn_time, max_turn_times, 4);
720
721	IRDA_ASSERT(((i >=0) && (i <10)), return 0;);
722	IRDA_ASSERT(((j >=0) && (j <4)), return 0;);
723
724	line_capacity = max_line_capacities[i][j];
725
726	IRDA_DEBUG(2, "%s(), line capacity=%d bytes\n",
727		   __func__, line_capacity);
728
729	return line_capacity;
730}
731
732#ifndef CONFIG_IRDA_DYNAMIC_WINDOW
733static __u32 irlap_requested_line_capacity(struct qos_info *qos)
734{
735	__u32 line_capacity;
736
737	line_capacity = qos->window_size.value *
738		(qos->data_size.value + 6 + qos->additional_bofs.value) +
739		irlap_min_turn_time_in_bytes(qos->baud_rate.value,
740					     qos->min_turn_time.value);
741
742	IRDA_DEBUG(2, "%s(), requested line capacity=%d\n",
743		   __func__, line_capacity);
744
745	return line_capacity;
746}
747#endif
748
749void irda_qos_bits_to_value(struct qos_info *qos)
750{
751	int index;
752
753	IRDA_ASSERT(qos != NULL, return;);
754
755	index = msb_index(qos->baud_rate.bits);
756	qos->baud_rate.value = baud_rates[index];
757
758	index = msb_index(qos->data_size.bits);
759	qos->data_size.value = data_sizes[index];
760
761	index = msb_index(qos->window_size.bits);
762	qos->window_size.value = index+1;
763
764	index = msb_index(qos->min_turn_time.bits);
765	qos->min_turn_time.value = min_turn_times[index];
766
767	index = msb_index(qos->max_turn_time.bits);
768	qos->max_turn_time.value = max_turn_times[index];
769
770	index = msb_index(qos->link_disc_time.bits);
771	qos->link_disc_time.value = link_disc_times[index];
772
773	index = msb_index(qos->additional_bofs.bits);
774	qos->additional_bofs.value = add_bofs[index];
775}
776EXPORT_SYMBOL(irda_qos_bits_to_value);