Loading...
1/*
2 * linux/init/main.c
3 *
4 * Copyright (C) 1991, 1992 Linus Torvalds
5 *
6 * GK 2/5/95 - Changed to support mounting root fs via NFS
7 * Added initrd & change_root: Werner Almesberger & Hans Lermen, Feb '96
8 * Moan early if gcc is old, avoiding bogus kernels - Paul Gortmaker, May '96
9 * Simplified starting of init: Michael A. Griffith <grif@acm.org>
10 */
11
12#define DEBUG /* Enable initcall_debug */
13
14#include <linux/types.h>
15#include <linux/extable.h>
16#include <linux/module.h>
17#include <linux/proc_fs.h>
18#include <linux/binfmts.h>
19#include <linux/kernel.h>
20#include <linux/syscalls.h>
21#include <linux/stackprotector.h>
22#include <linux/string.h>
23#include <linux/ctype.h>
24#include <linux/delay.h>
25#include <linux/ioport.h>
26#include <linux/init.h>
27#include <linux/initrd.h>
28#include <linux/bootmem.h>
29#include <linux/acpi.h>
30#include <linux/console.h>
31#include <linux/nmi.h>
32#include <linux/percpu.h>
33#include <linux/kmod.h>
34#include <linux/vmalloc.h>
35#include <linux/kernel_stat.h>
36#include <linux/start_kernel.h>
37#include <linux/security.h>
38#include <linux/smp.h>
39#include <linux/profile.h>
40#include <linux/rcupdate.h>
41#include <linux/moduleparam.h>
42#include <linux/kallsyms.h>
43#include <linux/writeback.h>
44#include <linux/cpu.h>
45#include <linux/cpuset.h>
46#include <linux/cgroup.h>
47#include <linux/efi.h>
48#include <linux/tick.h>
49#include <linux/sched/isolation.h>
50#include <linux/interrupt.h>
51#include <linux/taskstats_kern.h>
52#include <linux/delayacct.h>
53#include <linux/unistd.h>
54#include <linux/utsname.h>
55#include <linux/rmap.h>
56#include <linux/mempolicy.h>
57#include <linux/key.h>
58#include <linux/buffer_head.h>
59#include <linux/page_ext.h>
60#include <linux/debug_locks.h>
61#include <linux/debugobjects.h>
62#include <linux/lockdep.h>
63#include <linux/kmemleak.h>
64#include <linux/pid_namespace.h>
65#include <linux/device.h>
66#include <linux/kthread.h>
67#include <linux/sched.h>
68#include <linux/sched/init.h>
69#include <linux/signal.h>
70#include <linux/idr.h>
71#include <linux/kgdb.h>
72#include <linux/ftrace.h>
73#include <linux/async.h>
74#include <linux/sfi.h>
75#include <linux/shmem_fs.h>
76#include <linux/slab.h>
77#include <linux/perf_event.h>
78#include <linux/ptrace.h>
79#include <linux/pti.h>
80#include <linux/blkdev.h>
81#include <linux/elevator.h>
82#include <linux/sched_clock.h>
83#include <linux/sched/task.h>
84#include <linux/sched/task_stack.h>
85#include <linux/context_tracking.h>
86#include <linux/random.h>
87#include <linux/list.h>
88#include <linux/integrity.h>
89#include <linux/proc_ns.h>
90#include <linux/io.h>
91#include <linux/cache.h>
92#include <linux/rodata_test.h>
93#include <linux/jump_label.h>
94#include <linux/mem_encrypt.h>
95
96#include <asm/io.h>
97#include <asm/bugs.h>
98#include <asm/setup.h>
99#include <asm/sections.h>
100#include <asm/cacheflush.h>
101
102#define CREATE_TRACE_POINTS
103#include <trace/events/initcall.h>
104
105static int kernel_init(void *);
106
107extern void init_IRQ(void);
108extern void fork_init(void);
109extern void radix_tree_init(void);
110
111/*
112 * Debug helper: via this flag we know that we are in 'early bootup code'
113 * where only the boot processor is running with IRQ disabled. This means
114 * two things - IRQ must not be enabled before the flag is cleared and some
115 * operations which are not allowed with IRQ disabled are allowed while the
116 * flag is set.
117 */
118bool early_boot_irqs_disabled __read_mostly;
119
120enum system_states system_state __read_mostly;
121EXPORT_SYMBOL(system_state);
122
123/*
124 * Boot command-line arguments
125 */
126#define MAX_INIT_ARGS CONFIG_INIT_ENV_ARG_LIMIT
127#define MAX_INIT_ENVS CONFIG_INIT_ENV_ARG_LIMIT
128
129extern void time_init(void);
130/* Default late time init is NULL. archs can override this later. */
131void (*__initdata late_time_init)(void);
132
133/* Untouched command line saved by arch-specific code. */
134char __initdata boot_command_line[COMMAND_LINE_SIZE];
135/* Untouched saved command line (eg. for /proc) */
136char *saved_command_line;
137/* Command line for parameter parsing */
138static char *static_command_line;
139/* Command line for per-initcall parameter parsing */
140static char *initcall_command_line;
141
142static char *execute_command;
143static char *ramdisk_execute_command;
144
145/*
146 * Used to generate warnings if static_key manipulation functions are used
147 * before jump_label_init is called.
148 */
149bool static_key_initialized __read_mostly;
150EXPORT_SYMBOL_GPL(static_key_initialized);
151
152/*
153 * If set, this is an indication to the drivers that reset the underlying
154 * device before going ahead with the initialization otherwise driver might
155 * rely on the BIOS and skip the reset operation.
156 *
157 * This is useful if kernel is booting in an unreliable environment.
158 * For ex. kdump situation where previous kernel has crashed, BIOS has been
159 * skipped and devices will be in unknown state.
160 */
161unsigned int reset_devices;
162EXPORT_SYMBOL(reset_devices);
163
164static int __init set_reset_devices(char *str)
165{
166 reset_devices = 1;
167 return 1;
168}
169
170__setup("reset_devices", set_reset_devices);
171
172static const char *argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
173const char *envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
174static const char *panic_later, *panic_param;
175
176extern const struct obs_kernel_param __setup_start[], __setup_end[];
177
178static bool __init obsolete_checksetup(char *line)
179{
180 const struct obs_kernel_param *p;
181 bool had_early_param = false;
182
183 p = __setup_start;
184 do {
185 int n = strlen(p->str);
186 if (parameqn(line, p->str, n)) {
187 if (p->early) {
188 /* Already done in parse_early_param?
189 * (Needs exact match on param part).
190 * Keep iterating, as we can have early
191 * params and __setups of same names 8( */
192 if (line[n] == '\0' || line[n] == '=')
193 had_early_param = true;
194 } else if (!p->setup_func) {
195 pr_warn("Parameter %s is obsolete, ignored\n",
196 p->str);
197 return true;
198 } else if (p->setup_func(line + n))
199 return true;
200 }
201 p++;
202 } while (p < __setup_end);
203
204 return had_early_param;
205}
206
207/*
208 * This should be approx 2 Bo*oMips to start (note initial shift), and will
209 * still work even if initially too large, it will just take slightly longer
210 */
211unsigned long loops_per_jiffy = (1<<12);
212EXPORT_SYMBOL(loops_per_jiffy);
213
214static int __init debug_kernel(char *str)
215{
216 console_loglevel = CONSOLE_LOGLEVEL_DEBUG;
217 return 0;
218}
219
220static int __init quiet_kernel(char *str)
221{
222 console_loglevel = CONSOLE_LOGLEVEL_QUIET;
223 return 0;
224}
225
226early_param("debug", debug_kernel);
227early_param("quiet", quiet_kernel);
228
229static int __init loglevel(char *str)
230{
231 int newlevel;
232
233 /*
234 * Only update loglevel value when a correct setting was passed,
235 * to prevent blind crashes (when loglevel being set to 0) that
236 * are quite hard to debug
237 */
238 if (get_option(&str, &newlevel)) {
239 console_loglevel = newlevel;
240 return 0;
241 }
242
243 return -EINVAL;
244}
245
246early_param("loglevel", loglevel);
247
248/* Change NUL term back to "=", to make "param" the whole string. */
249static int __init repair_env_string(char *param, char *val,
250 const char *unused, void *arg)
251{
252 if (val) {
253 /* param=val or param="val"? */
254 if (val == param+strlen(param)+1)
255 val[-1] = '=';
256 else if (val == param+strlen(param)+2) {
257 val[-2] = '=';
258 memmove(val-1, val, strlen(val)+1);
259 val--;
260 } else
261 BUG();
262 }
263 return 0;
264}
265
266/* Anything after -- gets handed straight to init. */
267static int __init set_init_arg(char *param, char *val,
268 const char *unused, void *arg)
269{
270 unsigned int i;
271
272 if (panic_later)
273 return 0;
274
275 repair_env_string(param, val, unused, NULL);
276
277 for (i = 0; argv_init[i]; i++) {
278 if (i == MAX_INIT_ARGS) {
279 panic_later = "init";
280 panic_param = param;
281 return 0;
282 }
283 }
284 argv_init[i] = param;
285 return 0;
286}
287
288/*
289 * Unknown boot options get handed to init, unless they look like
290 * unused parameters (modprobe will find them in /proc/cmdline).
291 */
292static int __init unknown_bootoption(char *param, char *val,
293 const char *unused, void *arg)
294{
295 repair_env_string(param, val, unused, NULL);
296
297 /* Handle obsolete-style parameters */
298 if (obsolete_checksetup(param))
299 return 0;
300
301 /* Unused module parameter. */
302 if (strchr(param, '.') && (!val || strchr(param, '.') < val))
303 return 0;
304
305 if (panic_later)
306 return 0;
307
308 if (val) {
309 /* Environment option */
310 unsigned int i;
311 for (i = 0; envp_init[i]; i++) {
312 if (i == MAX_INIT_ENVS) {
313 panic_later = "env";
314 panic_param = param;
315 }
316 if (!strncmp(param, envp_init[i], val - param))
317 break;
318 }
319 envp_init[i] = param;
320 } else {
321 /* Command line option */
322 unsigned int i;
323 for (i = 0; argv_init[i]; i++) {
324 if (i == MAX_INIT_ARGS) {
325 panic_later = "init";
326 panic_param = param;
327 }
328 }
329 argv_init[i] = param;
330 }
331 return 0;
332}
333
334static int __init init_setup(char *str)
335{
336 unsigned int i;
337
338 execute_command = str;
339 /*
340 * In case LILO is going to boot us with default command line,
341 * it prepends "auto" before the whole cmdline which makes
342 * the shell think it should execute a script with such name.
343 * So we ignore all arguments entered _before_ init=... [MJ]
344 */
345 for (i = 1; i < MAX_INIT_ARGS; i++)
346 argv_init[i] = NULL;
347 return 1;
348}
349__setup("init=", init_setup);
350
351static int __init rdinit_setup(char *str)
352{
353 unsigned int i;
354
355 ramdisk_execute_command = str;
356 /* See "auto" comment in init_setup */
357 for (i = 1; i < MAX_INIT_ARGS; i++)
358 argv_init[i] = NULL;
359 return 1;
360}
361__setup("rdinit=", rdinit_setup);
362
363#ifndef CONFIG_SMP
364static const unsigned int setup_max_cpus = NR_CPUS;
365static inline void setup_nr_cpu_ids(void) { }
366static inline void smp_prepare_cpus(unsigned int maxcpus) { }
367#endif
368
369/*
370 * We need to store the untouched command line for future reference.
371 * We also need to store the touched command line since the parameter
372 * parsing is performed in place, and we should allow a component to
373 * store reference of name/value for future reference.
374 */
375static void __init setup_command_line(char *command_line)
376{
377 saved_command_line =
378 memblock_virt_alloc(strlen(boot_command_line) + 1, 0);
379 initcall_command_line =
380 memblock_virt_alloc(strlen(boot_command_line) + 1, 0);
381 static_command_line = memblock_virt_alloc(strlen(command_line) + 1, 0);
382 strcpy(saved_command_line, boot_command_line);
383 strcpy(static_command_line, command_line);
384}
385
386/*
387 * We need to finalize in a non-__init function or else race conditions
388 * between the root thread and the init thread may cause start_kernel to
389 * be reaped by free_initmem before the root thread has proceeded to
390 * cpu_idle.
391 *
392 * gcc-3.4 accidentally inlines this function, so use noinline.
393 */
394
395static __initdata DECLARE_COMPLETION(kthreadd_done);
396
397static noinline void __ref rest_init(void)
398{
399 struct task_struct *tsk;
400 int pid;
401
402 rcu_scheduler_starting();
403 /*
404 * We need to spawn init first so that it obtains pid 1, however
405 * the init task will end up wanting to create kthreads, which, if
406 * we schedule it before we create kthreadd, will OOPS.
407 */
408 pid = kernel_thread(kernel_init, NULL, CLONE_FS);
409 /*
410 * Pin init on the boot CPU. Task migration is not properly working
411 * until sched_init_smp() has been run. It will set the allowed
412 * CPUs for init to the non isolated CPUs.
413 */
414 rcu_read_lock();
415 tsk = find_task_by_pid_ns(pid, &init_pid_ns);
416 set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id()));
417 rcu_read_unlock();
418
419 numa_default_policy();
420 pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
421 rcu_read_lock();
422 kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
423 rcu_read_unlock();
424
425 /*
426 * Enable might_sleep() and smp_processor_id() checks.
427 * They cannot be enabled earlier because with CONFIG_PREEMPT=y
428 * kernel_thread() would trigger might_sleep() splats. With
429 * CONFIG_PREEMPT_VOLUNTARY=y the init task might have scheduled
430 * already, but it's stuck on the kthreadd_done completion.
431 */
432 system_state = SYSTEM_SCHEDULING;
433
434 complete(&kthreadd_done);
435
436 /*
437 * The boot idle thread must execute schedule()
438 * at least once to get things moving:
439 */
440 schedule_preempt_disabled();
441 /* Call into cpu_idle with preempt disabled */
442 cpu_startup_entry(CPUHP_ONLINE);
443}
444
445/* Check for early params. */
446static int __init do_early_param(char *param, char *val,
447 const char *unused, void *arg)
448{
449 const struct obs_kernel_param *p;
450
451 for (p = __setup_start; p < __setup_end; p++) {
452 if ((p->early && parameq(param, p->str)) ||
453 (strcmp(param, "console") == 0 &&
454 strcmp(p->str, "earlycon") == 0)
455 ) {
456 if (p->setup_func(val) != 0)
457 pr_warn("Malformed early option '%s'\n", param);
458 }
459 }
460 /* We accept everything at this stage. */
461 return 0;
462}
463
464void __init parse_early_options(char *cmdline)
465{
466 parse_args("early options", cmdline, NULL, 0, 0, 0, NULL,
467 do_early_param);
468}
469
470/* Arch code calls this early on, or if not, just before other parsing. */
471void __init parse_early_param(void)
472{
473 static int done __initdata;
474 static char tmp_cmdline[COMMAND_LINE_SIZE] __initdata;
475
476 if (done)
477 return;
478
479 /* All fall through to do_early_param. */
480 strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
481 parse_early_options(tmp_cmdline);
482 done = 1;
483}
484
485void __init __weak arch_post_acpi_subsys_init(void) { }
486
487void __init __weak smp_setup_processor_id(void)
488{
489}
490
491# if THREAD_SIZE >= PAGE_SIZE
492void __init __weak thread_stack_cache_init(void)
493{
494}
495#endif
496
497void __init __weak mem_encrypt_init(void) { }
498
499bool initcall_debug;
500core_param(initcall_debug, initcall_debug, bool, 0644);
501
502#ifdef TRACEPOINTS_ENABLED
503static void __init initcall_debug_enable(void);
504#else
505static inline void initcall_debug_enable(void)
506{
507}
508#endif
509
510/*
511 * Set up kernel memory allocators
512 */
513static void __init mm_init(void)
514{
515 /*
516 * page_ext requires contiguous pages,
517 * bigger than MAX_ORDER unless SPARSEMEM.
518 */
519 page_ext_init_flatmem();
520 mem_init();
521 kmem_cache_init();
522 pgtable_init();
523 vmalloc_init();
524 ioremap_huge_init();
525 /* Should be run before the first non-init thread is created */
526 init_espfix_bsp();
527 /* Should be run after espfix64 is set up. */
528 pti_init();
529}
530
531asmlinkage __visible void __init start_kernel(void)
532{
533 char *command_line;
534 char *after_dashes;
535
536 set_task_stack_end_magic(&init_task);
537 smp_setup_processor_id();
538 debug_objects_early_init();
539
540 cgroup_init_early();
541
542 local_irq_disable();
543 early_boot_irqs_disabled = true;
544
545 /*
546 * Interrupts are still disabled. Do necessary setups, then
547 * enable them.
548 */
549 boot_cpu_init();
550 page_address_init();
551 pr_notice("%s", linux_banner);
552 setup_arch(&command_line);
553 /*
554 * Set up the the initial canary and entropy after arch
555 * and after adding latent and command line entropy.
556 */
557 add_latent_entropy();
558 add_device_randomness(command_line, strlen(command_line));
559 boot_init_stack_canary();
560 mm_init_cpumask(&init_mm);
561 setup_command_line(command_line);
562 setup_nr_cpu_ids();
563 setup_per_cpu_areas();
564 boot_cpu_state_init();
565 smp_prepare_boot_cpu(); /* arch-specific boot-cpu hooks */
566
567 build_all_zonelists(NULL);
568 page_alloc_init();
569
570 pr_notice("Kernel command line: %s\n", boot_command_line);
571 parse_early_param();
572 after_dashes = parse_args("Booting kernel",
573 static_command_line, __start___param,
574 __stop___param - __start___param,
575 -1, -1, NULL, &unknown_bootoption);
576 if (!IS_ERR_OR_NULL(after_dashes))
577 parse_args("Setting init args", after_dashes, NULL, 0, -1, -1,
578 NULL, set_init_arg);
579
580 jump_label_init();
581
582 /*
583 * These use large bootmem allocations and must precede
584 * kmem_cache_init()
585 */
586 setup_log_buf(0);
587 vfs_caches_init_early();
588 sort_main_extable();
589 trap_init();
590 mm_init();
591
592 ftrace_init();
593
594 /* trace_printk can be enabled here */
595 early_trace_init();
596
597 /*
598 * Set up the scheduler prior starting any interrupts (such as the
599 * timer interrupt). Full topology setup happens at smp_init()
600 * time - but meanwhile we still have a functioning scheduler.
601 */
602 sched_init();
603 /*
604 * Disable preemption - early bootup scheduling is extremely
605 * fragile until we cpu_idle() for the first time.
606 */
607 preempt_disable();
608 if (WARN(!irqs_disabled(),
609 "Interrupts were enabled *very* early, fixing it\n"))
610 local_irq_disable();
611 radix_tree_init();
612
613 /*
614 * Set up housekeeping before setting up workqueues to allow the unbound
615 * workqueue to take non-housekeeping into account.
616 */
617 housekeeping_init();
618
619 /*
620 * Allow workqueue creation and work item queueing/cancelling
621 * early. Work item execution depends on kthreads and starts after
622 * workqueue_init().
623 */
624 workqueue_init_early();
625
626 rcu_init();
627
628 /* Trace events are available after this */
629 trace_init();
630
631 if (initcall_debug)
632 initcall_debug_enable();
633
634 context_tracking_init();
635 /* init some links before init_ISA_irqs() */
636 early_irq_init();
637 init_IRQ();
638 tick_init();
639 rcu_init_nohz();
640 init_timers();
641 hrtimers_init();
642 softirq_init();
643 timekeeping_init();
644 time_init();
645 sched_clock_postinit();
646 printk_safe_init();
647 perf_event_init();
648 profile_init();
649 call_function_init();
650 WARN(!irqs_disabled(), "Interrupts were enabled early\n");
651 early_boot_irqs_disabled = false;
652 local_irq_enable();
653
654 kmem_cache_init_late();
655
656 /*
657 * HACK ALERT! This is early. We're enabling the console before
658 * we've done PCI setups etc, and console_init() must be aware of
659 * this. But we do want output early, in case something goes wrong.
660 */
661 console_init();
662 if (panic_later)
663 panic("Too many boot %s vars at `%s'", panic_later,
664 panic_param);
665
666 lockdep_info();
667
668 /*
669 * Need to run this when irqs are enabled, because it wants
670 * to self-test [hard/soft]-irqs on/off lock inversion bugs
671 * too:
672 */
673 locking_selftest();
674
675 /*
676 * This needs to be called before any devices perform DMA
677 * operations that might use the SWIOTLB bounce buffers. It will
678 * mark the bounce buffers as decrypted so that their usage will
679 * not cause "plain-text" data to be decrypted when accessed.
680 */
681 mem_encrypt_init();
682
683#ifdef CONFIG_BLK_DEV_INITRD
684 if (initrd_start && !initrd_below_start_ok &&
685 page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
686 pr_crit("initrd overwritten (0x%08lx < 0x%08lx) - disabling it.\n",
687 page_to_pfn(virt_to_page((void *)initrd_start)),
688 min_low_pfn);
689 initrd_start = 0;
690 }
691#endif
692 page_ext_init();
693 kmemleak_init();
694 debug_objects_mem_init();
695 setup_per_cpu_pageset();
696 numa_policy_init();
697 acpi_early_init();
698 if (late_time_init)
699 late_time_init();
700 calibrate_delay();
701 pid_idr_init();
702 anon_vma_init();
703#ifdef CONFIG_X86
704 if (efi_enabled(EFI_RUNTIME_SERVICES))
705 efi_enter_virtual_mode();
706#endif
707 thread_stack_cache_init();
708 cred_init();
709 fork_init();
710 proc_caches_init();
711 uts_ns_init();
712 buffer_init();
713 key_init();
714 security_init();
715 dbg_late_init();
716 vfs_caches_init();
717 pagecache_init();
718 signals_init();
719 seq_file_init();
720 proc_root_init();
721 nsfs_init();
722 cpuset_init();
723 cgroup_init();
724 taskstats_init_early();
725 delayacct_init();
726
727 check_bugs();
728
729 acpi_subsystem_init();
730 arch_post_acpi_subsys_init();
731 sfi_init_late();
732
733 if (efi_enabled(EFI_RUNTIME_SERVICES)) {
734 efi_free_boot_services();
735 }
736
737 /* Do the rest non-__init'ed, we're now alive */
738 rest_init();
739}
740
741/* Call all constructor functions linked into the kernel. */
742static void __init do_ctors(void)
743{
744#ifdef CONFIG_CONSTRUCTORS
745 ctor_fn_t *fn = (ctor_fn_t *) __ctors_start;
746
747 for (; fn < (ctor_fn_t *) __ctors_end; fn++)
748 (*fn)();
749#endif
750}
751
752#ifdef CONFIG_KALLSYMS
753struct blacklist_entry {
754 struct list_head next;
755 char *buf;
756};
757
758static __initdata_or_module LIST_HEAD(blacklisted_initcalls);
759
760static int __init initcall_blacklist(char *str)
761{
762 char *str_entry;
763 struct blacklist_entry *entry;
764
765 /* str argument is a comma-separated list of functions */
766 do {
767 str_entry = strsep(&str, ",");
768 if (str_entry) {
769 pr_debug("blacklisting initcall %s\n", str_entry);
770 entry = alloc_bootmem(sizeof(*entry));
771 entry->buf = alloc_bootmem(strlen(str_entry) + 1);
772 strcpy(entry->buf, str_entry);
773 list_add(&entry->next, &blacklisted_initcalls);
774 }
775 } while (str_entry);
776
777 return 0;
778}
779
780static bool __init_or_module initcall_blacklisted(initcall_t fn)
781{
782 struct blacklist_entry *entry;
783 char fn_name[KSYM_SYMBOL_LEN];
784 unsigned long addr;
785
786 if (list_empty(&blacklisted_initcalls))
787 return false;
788
789 addr = (unsigned long) dereference_function_descriptor(fn);
790 sprint_symbol_no_offset(fn_name, addr);
791
792 /*
793 * fn will be "function_name [module_name]" where [module_name] is not
794 * displayed for built-in init functions. Strip off the [module_name].
795 */
796 strreplace(fn_name, ' ', '\0');
797
798 list_for_each_entry(entry, &blacklisted_initcalls, next) {
799 if (!strcmp(fn_name, entry->buf)) {
800 pr_debug("initcall %s blacklisted\n", fn_name);
801 return true;
802 }
803 }
804
805 return false;
806}
807#else
808static int __init initcall_blacklist(char *str)
809{
810 pr_warn("initcall_blacklist requires CONFIG_KALLSYMS\n");
811 return 0;
812}
813
814static bool __init_or_module initcall_blacklisted(initcall_t fn)
815{
816 return false;
817}
818#endif
819__setup("initcall_blacklist=", initcall_blacklist);
820
821static __init_or_module void
822trace_initcall_start_cb(void *data, initcall_t fn)
823{
824 ktime_t *calltime = (ktime_t *)data;
825
826 printk(KERN_DEBUG "calling %pF @ %i\n", fn, task_pid_nr(current));
827 *calltime = ktime_get();
828}
829
830static __init_or_module void
831trace_initcall_finish_cb(void *data, initcall_t fn, int ret)
832{
833 ktime_t *calltime = (ktime_t *)data;
834 ktime_t delta, rettime;
835 unsigned long long duration;
836
837 rettime = ktime_get();
838 delta = ktime_sub(rettime, *calltime);
839 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
840 printk(KERN_DEBUG "initcall %pF returned %d after %lld usecs\n",
841 fn, ret, duration);
842}
843
844static ktime_t initcall_calltime;
845
846#ifdef TRACEPOINTS_ENABLED
847static void __init initcall_debug_enable(void)
848{
849 int ret;
850
851 ret = register_trace_initcall_start(trace_initcall_start_cb,
852 &initcall_calltime);
853 ret |= register_trace_initcall_finish(trace_initcall_finish_cb,
854 &initcall_calltime);
855 WARN(ret, "Failed to register initcall tracepoints\n");
856}
857# define do_trace_initcall_start trace_initcall_start
858# define do_trace_initcall_finish trace_initcall_finish
859#else
860static inline void do_trace_initcall_start(initcall_t fn)
861{
862 if (!initcall_debug)
863 return;
864 trace_initcall_start_cb(&initcall_calltime, fn);
865}
866static inline void do_trace_initcall_finish(initcall_t fn, int ret)
867{
868 if (!initcall_debug)
869 return;
870 trace_initcall_finish_cb(&initcall_calltime, fn, ret);
871}
872#endif /* !TRACEPOINTS_ENABLED */
873
874int __init_or_module do_one_initcall(initcall_t fn)
875{
876 int count = preempt_count();
877 char msgbuf[64];
878 int ret;
879
880 if (initcall_blacklisted(fn))
881 return -EPERM;
882
883 do_trace_initcall_start(fn);
884 ret = fn();
885 do_trace_initcall_finish(fn, ret);
886
887 msgbuf[0] = 0;
888
889 if (preempt_count() != count) {
890 sprintf(msgbuf, "preemption imbalance ");
891 preempt_count_set(count);
892 }
893 if (irqs_disabled()) {
894 strlcat(msgbuf, "disabled interrupts ", sizeof(msgbuf));
895 local_irq_enable();
896 }
897 WARN(msgbuf[0], "initcall %pF returned with %s\n", fn, msgbuf);
898
899 add_latent_entropy();
900 return ret;
901}
902
903
904extern initcall_t __initcall_start[];
905extern initcall_t __initcall0_start[];
906extern initcall_t __initcall1_start[];
907extern initcall_t __initcall2_start[];
908extern initcall_t __initcall3_start[];
909extern initcall_t __initcall4_start[];
910extern initcall_t __initcall5_start[];
911extern initcall_t __initcall6_start[];
912extern initcall_t __initcall7_start[];
913extern initcall_t __initcall_end[];
914
915static initcall_t *initcall_levels[] __initdata = {
916 __initcall0_start,
917 __initcall1_start,
918 __initcall2_start,
919 __initcall3_start,
920 __initcall4_start,
921 __initcall5_start,
922 __initcall6_start,
923 __initcall7_start,
924 __initcall_end,
925};
926
927/* Keep these in sync with initcalls in include/linux/init.h */
928static char *initcall_level_names[] __initdata = {
929 "pure",
930 "core",
931 "postcore",
932 "arch",
933 "subsys",
934 "fs",
935 "device",
936 "late",
937};
938
939static void __init do_initcall_level(int level)
940{
941 initcall_t *fn;
942
943 strcpy(initcall_command_line, saved_command_line);
944 parse_args(initcall_level_names[level],
945 initcall_command_line, __start___param,
946 __stop___param - __start___param,
947 level, level,
948 NULL, &repair_env_string);
949
950 trace_initcall_level(initcall_level_names[level]);
951 for (fn = initcall_levels[level]; fn < initcall_levels[level+1]; fn++)
952 do_one_initcall(*fn);
953}
954
955static void __init do_initcalls(void)
956{
957 int level;
958
959 for (level = 0; level < ARRAY_SIZE(initcall_levels) - 1; level++)
960 do_initcall_level(level);
961}
962
963/*
964 * Ok, the machine is now initialized. None of the devices
965 * have been touched yet, but the CPU subsystem is up and
966 * running, and memory and process management works.
967 *
968 * Now we can finally start doing some real work..
969 */
970static void __init do_basic_setup(void)
971{
972 cpuset_init_smp();
973 shmem_init();
974 driver_init();
975 init_irq_proc();
976 do_ctors();
977 usermodehelper_enable();
978 do_initcalls();
979}
980
981static void __init do_pre_smp_initcalls(void)
982{
983 initcall_t *fn;
984
985 trace_initcall_level("early");
986 for (fn = __initcall_start; fn < __initcall0_start; fn++)
987 do_one_initcall(*fn);
988}
989
990/*
991 * This function requests modules which should be loaded by default and is
992 * called twice right after initrd is mounted and right before init is
993 * exec'd. If such modules are on either initrd or rootfs, they will be
994 * loaded before control is passed to userland.
995 */
996void __init load_default_modules(void)
997{
998 load_default_elevator_module();
999}
1000
1001static int run_init_process(const char *init_filename)
1002{
1003 argv_init[0] = init_filename;
1004 return do_execve(getname_kernel(init_filename),
1005 (const char __user *const __user *)argv_init,
1006 (const char __user *const __user *)envp_init);
1007}
1008
1009static int try_to_run_init_process(const char *init_filename)
1010{
1011 int ret;
1012
1013 ret = run_init_process(init_filename);
1014
1015 if (ret && ret != -ENOENT) {
1016 pr_err("Starting init: %s exists but couldn't execute it (error %d)\n",
1017 init_filename, ret);
1018 }
1019
1020 return ret;
1021}
1022
1023static noinline void __init kernel_init_freeable(void);
1024
1025#if defined(CONFIG_STRICT_KERNEL_RWX) || defined(CONFIG_STRICT_MODULE_RWX)
1026bool rodata_enabled __ro_after_init = true;
1027static int __init set_debug_rodata(char *str)
1028{
1029 return strtobool(str, &rodata_enabled);
1030}
1031__setup("rodata=", set_debug_rodata);
1032#endif
1033
1034#ifdef CONFIG_STRICT_KERNEL_RWX
1035static void mark_readonly(void)
1036{
1037 if (rodata_enabled) {
1038 /*
1039 * load_module() results in W+X mappings, which are cleaned up
1040 * with call_rcu_sched(). Let's make sure that queued work is
1041 * flushed so that we don't hit false positives looking for
1042 * insecure pages which are W+X.
1043 */
1044 rcu_barrier_sched();
1045 mark_rodata_ro();
1046 rodata_test();
1047 } else
1048 pr_info("Kernel memory protection disabled.\n");
1049}
1050#else
1051static inline void mark_readonly(void)
1052{
1053 pr_warn("This architecture does not have kernel memory protection.\n");
1054}
1055#endif
1056
1057static int __ref kernel_init(void *unused)
1058{
1059 int ret;
1060
1061 kernel_init_freeable();
1062 /* need to finish all async __init code before freeing the memory */
1063 async_synchronize_full();
1064 ftrace_free_init_mem();
1065 jump_label_invalidate_initmem();
1066 free_initmem();
1067 mark_readonly();
1068 system_state = SYSTEM_RUNNING;
1069 numa_default_policy();
1070
1071 rcu_end_inkernel_boot();
1072
1073 if (ramdisk_execute_command) {
1074 ret = run_init_process(ramdisk_execute_command);
1075 if (!ret)
1076 return 0;
1077 pr_err("Failed to execute %s (error %d)\n",
1078 ramdisk_execute_command, ret);
1079 }
1080
1081 /*
1082 * We try each of these until one succeeds.
1083 *
1084 * The Bourne shell can be used instead of init if we are
1085 * trying to recover a really broken machine.
1086 */
1087 if (execute_command) {
1088 ret = run_init_process(execute_command);
1089 if (!ret)
1090 return 0;
1091 panic("Requested init %s failed (error %d).",
1092 execute_command, ret);
1093 }
1094 if (!try_to_run_init_process("/sbin/init") ||
1095 !try_to_run_init_process("/etc/init") ||
1096 !try_to_run_init_process("/bin/init") ||
1097 !try_to_run_init_process("/bin/sh"))
1098 return 0;
1099
1100 panic("No working init found. Try passing init= option to kernel. "
1101 "See Linux Documentation/admin-guide/init.rst for guidance.");
1102}
1103
1104static noinline void __init kernel_init_freeable(void)
1105{
1106 /*
1107 * Wait until kthreadd is all set-up.
1108 */
1109 wait_for_completion(&kthreadd_done);
1110
1111 /* Now the scheduler is fully set up and can do blocking allocations */
1112 gfp_allowed_mask = __GFP_BITS_MASK;
1113
1114 /*
1115 * init can allocate pages on any node
1116 */
1117 set_mems_allowed(node_states[N_MEMORY]);
1118
1119 cad_pid = task_pid(current);
1120
1121 smp_prepare_cpus(setup_max_cpus);
1122
1123 workqueue_init();
1124
1125 init_mm_internals();
1126
1127 do_pre_smp_initcalls();
1128 lockup_detector_init();
1129
1130 smp_init();
1131 sched_init_smp();
1132
1133 page_alloc_init_late();
1134
1135 do_basic_setup();
1136
1137 /* Open the /dev/console on the rootfs, this should never fail */
1138 if (ksys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
1139 pr_err("Warning: unable to open an initial console.\n");
1140
1141 (void) ksys_dup(0);
1142 (void) ksys_dup(0);
1143 /*
1144 * check if there is an early userspace init. If yes, let it do all
1145 * the work
1146 */
1147
1148 if (!ramdisk_execute_command)
1149 ramdisk_execute_command = "/init";
1150
1151 if (ksys_access((const char __user *)
1152 ramdisk_execute_command, 0) != 0) {
1153 ramdisk_execute_command = NULL;
1154 prepare_namespace();
1155 }
1156
1157 /*
1158 * Ok, we have completed the initial bootup, and
1159 * we're essentially up and running. Get rid of the
1160 * initmem segments and start the user-mode stuff..
1161 *
1162 * rootfs is available now, try loading the public keys
1163 * and default modules
1164 */
1165
1166 integrity_load_keys();
1167 load_default_modules();
1168}
1/*
2 * linux/init/main.c
3 *
4 * Copyright (C) 1991, 1992 Linus Torvalds
5 *
6 * GK 2/5/95 - Changed to support mounting root fs via NFS
7 * Added initrd & change_root: Werner Almesberger & Hans Lermen, Feb '96
8 * Moan early if gcc is old, avoiding bogus kernels - Paul Gortmaker, May '96
9 * Simplified starting of init: Michael A. Griffith <grif@acm.org>
10 */
11
12#include <linux/types.h>
13#include <linux/module.h>
14#include <linux/proc_fs.h>
15#include <linux/kernel.h>
16#include <linux/syscalls.h>
17#include <linux/stackprotector.h>
18#include <linux/string.h>
19#include <linux/ctype.h>
20#include <linux/delay.h>
21#include <linux/ioport.h>
22#include <linux/init.h>
23#include <linux/initrd.h>
24#include <linux/bootmem.h>
25#include <linux/acpi.h>
26#include <linux/tty.h>
27#include <linux/percpu.h>
28#include <linux/kmod.h>
29#include <linux/vmalloc.h>
30#include <linux/kernel_stat.h>
31#include <linux/start_kernel.h>
32#include <linux/security.h>
33#include <linux/smp.h>
34#include <linux/profile.h>
35#include <linux/rcupdate.h>
36#include <linux/moduleparam.h>
37#include <linux/kallsyms.h>
38#include <linux/writeback.h>
39#include <linux/cpu.h>
40#include <linux/cpuset.h>
41#include <linux/cgroup.h>
42#include <linux/efi.h>
43#include <linux/tick.h>
44#include <linux/interrupt.h>
45#include <linux/taskstats_kern.h>
46#include <linux/delayacct.h>
47#include <linux/unistd.h>
48#include <linux/rmap.h>
49#include <linux/mempolicy.h>
50#include <linux/key.h>
51#include <linux/buffer_head.h>
52#include <linux/page_cgroup.h>
53#include <linux/debug_locks.h>
54#include <linux/debugobjects.h>
55#include <linux/lockdep.h>
56#include <linux/kmemleak.h>
57#include <linux/pid_namespace.h>
58#include <linux/device.h>
59#include <linux/kthread.h>
60#include <linux/sched.h>
61#include <linux/signal.h>
62#include <linux/idr.h>
63#include <linux/kgdb.h>
64#include <linux/ftrace.h>
65#include <linux/async.h>
66#include <linux/kmemcheck.h>
67#include <linux/sfi.h>
68#include <linux/shmem_fs.h>
69#include <linux/slab.h>
70#include <linux/perf_event.h>
71
72#include <asm/io.h>
73#include <asm/bugs.h>
74#include <asm/setup.h>
75#include <asm/sections.h>
76#include <asm/cacheflush.h>
77
78#ifdef CONFIG_X86_LOCAL_APIC
79#include <asm/smp.h>
80#endif
81
82static int kernel_init(void *);
83
84extern void init_IRQ(void);
85extern void fork_init(unsigned long);
86extern void mca_init(void);
87extern void sbus_init(void);
88extern void prio_tree_init(void);
89extern void radix_tree_init(void);
90#ifndef CONFIG_DEBUG_RODATA
91static inline void mark_rodata_ro(void) { }
92#endif
93
94#ifdef CONFIG_TC
95extern void tc_init(void);
96#endif
97
98/*
99 * Debug helper: via this flag we know that we are in 'early bootup code'
100 * where only the boot processor is running with IRQ disabled. This means
101 * two things - IRQ must not be enabled before the flag is cleared and some
102 * operations which are not allowed with IRQ disabled are allowed while the
103 * flag is set.
104 */
105bool early_boot_irqs_disabled __read_mostly;
106
107enum system_states system_state __read_mostly;
108EXPORT_SYMBOL(system_state);
109
110/*
111 * Boot command-line arguments
112 */
113#define MAX_INIT_ARGS CONFIG_INIT_ENV_ARG_LIMIT
114#define MAX_INIT_ENVS CONFIG_INIT_ENV_ARG_LIMIT
115
116extern void time_init(void);
117/* Default late time init is NULL. archs can override this later. */
118void (*__initdata late_time_init)(void);
119extern void softirq_init(void);
120
121/* Untouched command line saved by arch-specific code. */
122char __initdata boot_command_line[COMMAND_LINE_SIZE];
123/* Untouched saved command line (eg. for /proc) */
124char *saved_command_line;
125/* Command line for parameter parsing */
126static char *static_command_line;
127
128static char *execute_command;
129static char *ramdisk_execute_command;
130
131/*
132 * If set, this is an indication to the drivers that reset the underlying
133 * device before going ahead with the initialization otherwise driver might
134 * rely on the BIOS and skip the reset operation.
135 *
136 * This is useful if kernel is booting in an unreliable environment.
137 * For ex. kdump situaiton where previous kernel has crashed, BIOS has been
138 * skipped and devices will be in unknown state.
139 */
140unsigned int reset_devices;
141EXPORT_SYMBOL(reset_devices);
142
143static int __init set_reset_devices(char *str)
144{
145 reset_devices = 1;
146 return 1;
147}
148
149__setup("reset_devices", set_reset_devices);
150
151static const char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
152const char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
153static const char *panic_later, *panic_param;
154
155extern const struct obs_kernel_param __setup_start[], __setup_end[];
156
157static int __init obsolete_checksetup(char *line)
158{
159 const struct obs_kernel_param *p;
160 int had_early_param = 0;
161
162 p = __setup_start;
163 do {
164 int n = strlen(p->str);
165 if (parameqn(line, p->str, n)) {
166 if (p->early) {
167 /* Already done in parse_early_param?
168 * (Needs exact match on param part).
169 * Keep iterating, as we can have early
170 * params and __setups of same names 8( */
171 if (line[n] == '\0' || line[n] == '=')
172 had_early_param = 1;
173 } else if (!p->setup_func) {
174 printk(KERN_WARNING "Parameter %s is obsolete,"
175 " ignored\n", p->str);
176 return 1;
177 } else if (p->setup_func(line + n))
178 return 1;
179 }
180 p++;
181 } while (p < __setup_end);
182
183 return had_early_param;
184}
185
186/*
187 * This should be approx 2 Bo*oMips to start (note initial shift), and will
188 * still work even if initially too large, it will just take slightly longer
189 */
190unsigned long loops_per_jiffy = (1<<12);
191
192EXPORT_SYMBOL(loops_per_jiffy);
193
194static int __init debug_kernel(char *str)
195{
196 console_loglevel = 10;
197 return 0;
198}
199
200static int __init quiet_kernel(char *str)
201{
202 console_loglevel = 4;
203 return 0;
204}
205
206early_param("debug", debug_kernel);
207early_param("quiet", quiet_kernel);
208
209static int __init loglevel(char *str)
210{
211 int newlevel;
212
213 /*
214 * Only update loglevel value when a correct setting was passed,
215 * to prevent blind crashes (when loglevel being set to 0) that
216 * are quite hard to debug
217 */
218 if (get_option(&str, &newlevel)) {
219 console_loglevel = newlevel;
220 return 0;
221 }
222
223 return -EINVAL;
224}
225
226early_param("loglevel", loglevel);
227
228/* Change NUL term back to "=", to make "param" the whole string. */
229static int __init repair_env_string(char *param, char *val, const char *unused)
230{
231 if (val) {
232 /* param=val or param="val"? */
233 if (val == param+strlen(param)+1)
234 val[-1] = '=';
235 else if (val == param+strlen(param)+2) {
236 val[-2] = '=';
237 memmove(val-1, val, strlen(val)+1);
238 val--;
239 } else
240 BUG();
241 }
242 return 0;
243}
244
245/*
246 * Unknown boot options get handed to init, unless they look like
247 * unused parameters (modprobe will find them in /proc/cmdline).
248 */
249static int __init unknown_bootoption(char *param, char *val, const char *unused)
250{
251 repair_env_string(param, val, unused);
252
253 /* Handle obsolete-style parameters */
254 if (obsolete_checksetup(param))
255 return 0;
256
257 /* Unused module parameter. */
258 if (strchr(param, '.') && (!val || strchr(param, '.') < val))
259 return 0;
260
261 if (panic_later)
262 return 0;
263
264 if (val) {
265 /* Environment option */
266 unsigned int i;
267 for (i = 0; envp_init[i]; i++) {
268 if (i == MAX_INIT_ENVS) {
269 panic_later = "Too many boot env vars at `%s'";
270 panic_param = param;
271 }
272 if (!strncmp(param, envp_init[i], val - param))
273 break;
274 }
275 envp_init[i] = param;
276 } else {
277 /* Command line option */
278 unsigned int i;
279 for (i = 0; argv_init[i]; i++) {
280 if (i == MAX_INIT_ARGS) {
281 panic_later = "Too many boot init vars at `%s'";
282 panic_param = param;
283 }
284 }
285 argv_init[i] = param;
286 }
287 return 0;
288}
289
290static int __init init_setup(char *str)
291{
292 unsigned int i;
293
294 execute_command = str;
295 /*
296 * In case LILO is going to boot us with default command line,
297 * it prepends "auto" before the whole cmdline which makes
298 * the shell think it should execute a script with such name.
299 * So we ignore all arguments entered _before_ init=... [MJ]
300 */
301 for (i = 1; i < MAX_INIT_ARGS; i++)
302 argv_init[i] = NULL;
303 return 1;
304}
305__setup("init=", init_setup);
306
307static int __init rdinit_setup(char *str)
308{
309 unsigned int i;
310
311 ramdisk_execute_command = str;
312 /* See "auto" comment in init_setup */
313 for (i = 1; i < MAX_INIT_ARGS; i++)
314 argv_init[i] = NULL;
315 return 1;
316}
317__setup("rdinit=", rdinit_setup);
318
319#ifndef CONFIG_SMP
320static const unsigned int setup_max_cpus = NR_CPUS;
321#ifdef CONFIG_X86_LOCAL_APIC
322static void __init smp_init(void)
323{
324 APIC_init_uniprocessor();
325}
326#else
327#define smp_init() do { } while (0)
328#endif
329
330static inline void setup_nr_cpu_ids(void) { }
331static inline void smp_prepare_cpus(unsigned int maxcpus) { }
332#endif
333
334/*
335 * We need to store the untouched command line for future reference.
336 * We also need to store the touched command line since the parameter
337 * parsing is performed in place, and we should allow a component to
338 * store reference of name/value for future reference.
339 */
340static void __init setup_command_line(char *command_line)
341{
342 saved_command_line = alloc_bootmem(strlen (boot_command_line)+1);
343 static_command_line = alloc_bootmem(strlen (command_line)+1);
344 strcpy (saved_command_line, boot_command_line);
345 strcpy (static_command_line, command_line);
346}
347
348/*
349 * We need to finalize in a non-__init function or else race conditions
350 * between the root thread and the init thread may cause start_kernel to
351 * be reaped by free_initmem before the root thread has proceeded to
352 * cpu_idle.
353 *
354 * gcc-3.4 accidentally inlines this function, so use noinline.
355 */
356
357static __initdata DECLARE_COMPLETION(kthreadd_done);
358
359static noinline void __init_refok rest_init(void)
360{
361 int pid;
362
363 rcu_scheduler_starting();
364 /*
365 * We need to spawn init first so that it obtains pid 1, however
366 * the init task will end up wanting to create kthreads, which, if
367 * we schedule it before we create kthreadd, will OOPS.
368 */
369 kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
370 numa_default_policy();
371 pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
372 rcu_read_lock();
373 kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
374 rcu_read_unlock();
375 complete(&kthreadd_done);
376
377 /*
378 * The boot idle thread must execute schedule()
379 * at least once to get things moving:
380 */
381 init_idle_bootup_task(current);
382 schedule_preempt_disabled();
383 /* Call into cpu_idle with preempt disabled */
384 cpu_idle();
385}
386
387/* Check for early params. */
388static int __init do_early_param(char *param, char *val, const char *unused)
389{
390 const struct obs_kernel_param *p;
391
392 for (p = __setup_start; p < __setup_end; p++) {
393 if ((p->early && parameq(param, p->str)) ||
394 (strcmp(param, "console") == 0 &&
395 strcmp(p->str, "earlycon") == 0)
396 ) {
397 if (p->setup_func(val) != 0)
398 printk(KERN_WARNING
399 "Malformed early option '%s'\n", param);
400 }
401 }
402 /* We accept everything at this stage. */
403 return 0;
404}
405
406void __init parse_early_options(char *cmdline)
407{
408 parse_args("early options", cmdline, NULL, 0, 0, 0, do_early_param);
409}
410
411/* Arch code calls this early on, or if not, just before other parsing. */
412void __init parse_early_param(void)
413{
414 static __initdata int done = 0;
415 static __initdata char tmp_cmdline[COMMAND_LINE_SIZE];
416
417 if (done)
418 return;
419
420 /* All fall through to do_early_param. */
421 strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
422 parse_early_options(tmp_cmdline);
423 done = 1;
424}
425
426/*
427 * Activate the first processor.
428 */
429
430static void __init boot_cpu_init(void)
431{
432 int cpu = smp_processor_id();
433 /* Mark the boot cpu "present", "online" etc for SMP and UP case */
434 set_cpu_online(cpu, true);
435 set_cpu_active(cpu, true);
436 set_cpu_present(cpu, true);
437 set_cpu_possible(cpu, true);
438}
439
440void __init __weak smp_setup_processor_id(void)
441{
442}
443
444void __init __weak thread_info_cache_init(void)
445{
446}
447
448/*
449 * Set up kernel memory allocators
450 */
451static void __init mm_init(void)
452{
453 /*
454 * page_cgroup requires contiguous pages,
455 * bigger than MAX_ORDER unless SPARSEMEM.
456 */
457 page_cgroup_init_flatmem();
458 mem_init();
459 kmem_cache_init();
460 percpu_init_late();
461 pgtable_cache_init();
462 vmalloc_init();
463}
464
465asmlinkage void __init start_kernel(void)
466{
467 char * command_line;
468 extern const struct kernel_param __start___param[], __stop___param[];
469
470 /*
471 * Need to run as early as possible, to initialize the
472 * lockdep hash:
473 */
474 lockdep_init();
475 smp_setup_processor_id();
476 debug_objects_early_init();
477
478 /*
479 * Set up the the initial canary ASAP:
480 */
481 boot_init_stack_canary();
482
483 cgroup_init_early();
484
485 local_irq_disable();
486 early_boot_irqs_disabled = true;
487
488/*
489 * Interrupts are still disabled. Do necessary setups, then
490 * enable them
491 */
492 tick_init();
493 boot_cpu_init();
494 page_address_init();
495 printk(KERN_NOTICE "%s", linux_banner);
496 setup_arch(&command_line);
497 mm_init_owner(&init_mm, &init_task);
498 mm_init_cpumask(&init_mm);
499 setup_command_line(command_line);
500 setup_nr_cpu_ids();
501 setup_per_cpu_areas();
502 smp_prepare_boot_cpu(); /* arch-specific boot-cpu hooks */
503
504 build_all_zonelists(NULL);
505 page_alloc_init();
506
507 printk(KERN_NOTICE "Kernel command line: %s\n", boot_command_line);
508 parse_early_param();
509 parse_args("Booting kernel", static_command_line, __start___param,
510 __stop___param - __start___param,
511 -1, -1, &unknown_bootoption);
512
513 jump_label_init();
514
515 /*
516 * These use large bootmem allocations and must precede
517 * kmem_cache_init()
518 */
519 setup_log_buf(0);
520 pidhash_init();
521 vfs_caches_init_early();
522 sort_main_extable();
523 trap_init();
524 mm_init();
525
526 /*
527 * Set up the scheduler prior starting any interrupts (such as the
528 * timer interrupt). Full topology setup happens at smp_init()
529 * time - but meanwhile we still have a functioning scheduler.
530 */
531 sched_init();
532 /*
533 * Disable preemption - early bootup scheduling is extremely
534 * fragile until we cpu_idle() for the first time.
535 */
536 preempt_disable();
537 if (!irqs_disabled()) {
538 printk(KERN_WARNING "start_kernel(): bug: interrupts were "
539 "enabled *very* early, fixing it\n");
540 local_irq_disable();
541 }
542 idr_init_cache();
543 perf_event_init();
544 rcu_init();
545 radix_tree_init();
546 /* init some links before init_ISA_irqs() */
547 early_irq_init();
548 init_IRQ();
549 prio_tree_init();
550 init_timers();
551 hrtimers_init();
552 softirq_init();
553 timekeeping_init();
554 time_init();
555 profile_init();
556 call_function_init();
557 if (!irqs_disabled())
558 printk(KERN_CRIT "start_kernel(): bug: interrupts were "
559 "enabled early\n");
560 early_boot_irqs_disabled = false;
561 local_irq_enable();
562
563 kmem_cache_init_late();
564
565 /*
566 * HACK ALERT! This is early. We're enabling the console before
567 * we've done PCI setups etc, and console_init() must be aware of
568 * this. But we do want output early, in case something goes wrong.
569 */
570 console_init();
571 if (panic_later)
572 panic(panic_later, panic_param);
573
574 lockdep_info();
575
576 /*
577 * Need to run this when irqs are enabled, because it wants
578 * to self-test [hard/soft]-irqs on/off lock inversion bugs
579 * too:
580 */
581 locking_selftest();
582
583#ifdef CONFIG_BLK_DEV_INITRD
584 if (initrd_start && !initrd_below_start_ok &&
585 page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
586 printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
587 "disabling it.\n",
588 page_to_pfn(virt_to_page((void *)initrd_start)),
589 min_low_pfn);
590 initrd_start = 0;
591 }
592#endif
593 page_cgroup_init();
594 debug_objects_mem_init();
595 kmemleak_init();
596 setup_per_cpu_pageset();
597 numa_policy_init();
598 if (late_time_init)
599 late_time_init();
600 sched_clock_init();
601 calibrate_delay();
602 pidmap_init();
603 anon_vma_init();
604#ifdef CONFIG_X86
605 if (efi_enabled)
606 efi_enter_virtual_mode();
607#endif
608 thread_info_cache_init();
609 cred_init();
610 fork_init(totalram_pages);
611 proc_caches_init();
612 buffer_init();
613 key_init();
614 security_init();
615 dbg_late_init();
616 vfs_caches_init(totalram_pages);
617 signals_init();
618 /* rootfs populating might need page-writeback */
619 page_writeback_init();
620#ifdef CONFIG_PROC_FS
621 proc_root_init();
622#endif
623 cgroup_init();
624 cpuset_init();
625 taskstats_init_early();
626 delayacct_init();
627
628 check_bugs();
629
630 acpi_early_init(); /* before LAPIC and SMP init */
631 sfi_init_late();
632
633 ftrace_init();
634
635 /* Do the rest non-__init'ed, we're now alive */
636 rest_init();
637}
638
639/* Call all constructor functions linked into the kernel. */
640static void __init do_ctors(void)
641{
642#ifdef CONFIG_CONSTRUCTORS
643 ctor_fn_t *fn = (ctor_fn_t *) __ctors_start;
644
645 for (; fn < (ctor_fn_t *) __ctors_end; fn++)
646 (*fn)();
647#endif
648}
649
650bool initcall_debug;
651core_param(initcall_debug, initcall_debug, bool, 0644);
652
653static char msgbuf[64];
654
655static int __init_or_module do_one_initcall_debug(initcall_t fn)
656{
657 ktime_t calltime, delta, rettime;
658 unsigned long long duration;
659 int ret;
660
661 printk(KERN_DEBUG "calling %pF @ %i\n", fn, task_pid_nr(current));
662 calltime = ktime_get();
663 ret = fn();
664 rettime = ktime_get();
665 delta = ktime_sub(rettime, calltime);
666 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
667 printk(KERN_DEBUG "initcall %pF returned %d after %lld usecs\n", fn,
668 ret, duration);
669
670 return ret;
671}
672
673int __init_or_module do_one_initcall(initcall_t fn)
674{
675 int count = preempt_count();
676 int ret;
677
678 if (initcall_debug)
679 ret = do_one_initcall_debug(fn);
680 else
681 ret = fn();
682
683 msgbuf[0] = 0;
684
685 if (ret && ret != -ENODEV && initcall_debug)
686 sprintf(msgbuf, "error code %d ", ret);
687
688 if (preempt_count() != count) {
689 strlcat(msgbuf, "preemption imbalance ", sizeof(msgbuf));
690 preempt_count() = count;
691 }
692 if (irqs_disabled()) {
693 strlcat(msgbuf, "disabled interrupts ", sizeof(msgbuf));
694 local_irq_enable();
695 }
696 if (msgbuf[0]) {
697 printk("initcall %pF returned with %s\n", fn, msgbuf);
698 }
699
700 return ret;
701}
702
703
704extern initcall_t __initcall_start[];
705extern initcall_t __initcall0_start[];
706extern initcall_t __initcall1_start[];
707extern initcall_t __initcall2_start[];
708extern initcall_t __initcall3_start[];
709extern initcall_t __initcall4_start[];
710extern initcall_t __initcall5_start[];
711extern initcall_t __initcall6_start[];
712extern initcall_t __initcall7_start[];
713extern initcall_t __initcall_end[];
714
715static initcall_t *initcall_levels[] __initdata = {
716 __initcall0_start,
717 __initcall1_start,
718 __initcall2_start,
719 __initcall3_start,
720 __initcall4_start,
721 __initcall5_start,
722 __initcall6_start,
723 __initcall7_start,
724 __initcall_end,
725};
726
727static char *initcall_level_names[] __initdata = {
728 "early",
729 "core",
730 "postcore",
731 "arch",
732 "subsys",
733 "fs",
734 "device",
735 "late",
736};
737
738static void __init do_initcall_level(int level)
739{
740 extern const struct kernel_param __start___param[], __stop___param[];
741 initcall_t *fn;
742
743 strcpy(static_command_line, saved_command_line);
744 parse_args(initcall_level_names[level],
745 static_command_line, __start___param,
746 __stop___param - __start___param,
747 level, level,
748 &repair_env_string);
749
750 for (fn = initcall_levels[level]; fn < initcall_levels[level+1]; fn++)
751 do_one_initcall(*fn);
752}
753
754static void __init do_initcalls(void)
755{
756 int level;
757
758 for (level = 0; level < ARRAY_SIZE(initcall_levels) - 1; level++)
759 do_initcall_level(level);
760}
761
762/*
763 * Ok, the machine is now initialized. None of the devices
764 * have been touched yet, but the CPU subsystem is up and
765 * running, and memory and process management works.
766 *
767 * Now we can finally start doing some real work..
768 */
769static void __init do_basic_setup(void)
770{
771 cpuset_init_smp();
772 usermodehelper_init();
773 shmem_init();
774 driver_init();
775 init_irq_proc();
776 do_ctors();
777 usermodehelper_enable();
778 do_initcalls();
779}
780
781static void __init do_pre_smp_initcalls(void)
782{
783 initcall_t *fn;
784
785 for (fn = __initcall_start; fn < __initcall0_start; fn++)
786 do_one_initcall(*fn);
787}
788
789static void run_init_process(const char *init_filename)
790{
791 argv_init[0] = init_filename;
792 kernel_execve(init_filename, argv_init, envp_init);
793}
794
795/* This is a non __init function. Force it to be noinline otherwise gcc
796 * makes it inline to init() and it becomes part of init.text section
797 */
798static noinline int init_post(void)
799{
800 /* need to finish all async __init code before freeing the memory */
801 async_synchronize_full();
802 free_initmem();
803 mark_rodata_ro();
804 system_state = SYSTEM_RUNNING;
805 numa_default_policy();
806
807
808 current->signal->flags |= SIGNAL_UNKILLABLE;
809
810 if (ramdisk_execute_command) {
811 run_init_process(ramdisk_execute_command);
812 printk(KERN_WARNING "Failed to execute %s\n",
813 ramdisk_execute_command);
814 }
815
816 /*
817 * We try each of these until one succeeds.
818 *
819 * The Bourne shell can be used instead of init if we are
820 * trying to recover a really broken machine.
821 */
822 if (execute_command) {
823 run_init_process(execute_command);
824 printk(KERN_WARNING "Failed to execute %s. Attempting "
825 "defaults...\n", execute_command);
826 }
827 run_init_process("/sbin/init");
828 run_init_process("/etc/init");
829 run_init_process("/bin/init");
830 run_init_process("/bin/sh");
831
832 panic("No init found. Try passing init= option to kernel. "
833 "See Linux Documentation/init.txt for guidance.");
834}
835
836static int __init kernel_init(void * unused)
837{
838 /*
839 * Wait until kthreadd is all set-up.
840 */
841 wait_for_completion(&kthreadd_done);
842
843 /* Now the scheduler is fully set up and can do blocking allocations */
844 gfp_allowed_mask = __GFP_BITS_MASK;
845
846 /*
847 * init can allocate pages on any node
848 */
849 set_mems_allowed(node_states[N_HIGH_MEMORY]);
850 /*
851 * init can run on any cpu.
852 */
853 set_cpus_allowed_ptr(current, cpu_all_mask);
854
855 cad_pid = task_pid(current);
856
857 smp_prepare_cpus(setup_max_cpus);
858
859 do_pre_smp_initcalls();
860 lockup_detector_init();
861
862 smp_init();
863 sched_init_smp();
864
865 do_basic_setup();
866
867 /* Open the /dev/console on the rootfs, this should never fail */
868 if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
869 printk(KERN_WARNING "Warning: unable to open an initial console.\n");
870
871 (void) sys_dup(0);
872 (void) sys_dup(0);
873 /*
874 * check if there is an early userspace init. If yes, let it do all
875 * the work
876 */
877
878 if (!ramdisk_execute_command)
879 ramdisk_execute_command = "/init";
880
881 if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
882 ramdisk_execute_command = NULL;
883 prepare_namespace();
884 }
885
886 /*
887 * Ok, we have completed the initial bootup, and
888 * we're essentially up and running. Get rid of the
889 * initmem segments and start the user-mode stuff..
890 */
891
892 init_post();
893 return 0;
894}