Linux Audio

Check our new training course

Loading...
v4.17
  1/*
  2 * Support for SATA devices on Serial Attached SCSI (SAS) controllers
  3 *
  4 * Copyright (C) 2006 IBM Corporation
  5 *
  6 * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
  7 *
  8 * This program is free software; you can redistribute it and/or
  9 * modify it under the terms of the GNU General Public License as
 10 * published by the Free Software Foundation; either version 2 of the
 11 * License, or (at your option) any later version.
 12 *
 13 * This program is distributed in the hope that it will be useful, but
 14 * WITHOUT ANY WARRANTY; without even the implied warranty of
 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 16 * General Public License for more details.
 17 *
 18 * You should have received a copy of the GNU General Public License
 19 * along with this program; if not, write to the Free Software
 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
 21 * USA
 22 */
 23
 24#include <linux/scatterlist.h>
 25#include <linux/slab.h>
 26#include <linux/async.h>
 27#include <linux/export.h>
 28
 29#include <scsi/sas_ata.h>
 30#include "sas_internal.h"
 31#include <scsi/scsi_host.h>
 32#include <scsi/scsi_device.h>
 33#include <scsi/scsi_tcq.h>
 34#include <scsi/scsi.h>
 35#include <scsi/scsi_transport.h>
 36#include <scsi/scsi_transport_sas.h>
 37#include "../scsi_sas_internal.h"
 38#include "../scsi_transport_api.h"
 39#include <scsi/scsi_eh.h>
 40
 41static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
 42{
 43	/* Cheesy attempt to translate SAS errors into ATA.  Hah! */
 44
 45	/* transport error */
 46	if (ts->resp == SAS_TASK_UNDELIVERED)
 47		return AC_ERR_ATA_BUS;
 48
 49	/* ts->resp == SAS_TASK_COMPLETE */
 50	/* task delivered, what happened afterwards? */
 51	switch (ts->stat) {
 52		case SAS_DEV_NO_RESPONSE:
 53			return AC_ERR_TIMEOUT;
 54
 55		case SAS_INTERRUPTED:
 56		case SAS_PHY_DOWN:
 57		case SAS_NAK_R_ERR:
 58			return AC_ERR_ATA_BUS;
 59
 60
 61		case SAS_DATA_UNDERRUN:
 62			/*
 63			 * Some programs that use the taskfile interface
 64			 * (smartctl in particular) can cause underrun
 65			 * problems.  Ignore these errors, perhaps at our
 66			 * peril.
 67			 */
 68			return 0;
 69
 70		case SAS_DATA_OVERRUN:
 71		case SAS_QUEUE_FULL:
 72		case SAS_DEVICE_UNKNOWN:
 73		case SAS_SG_ERR:
 74			return AC_ERR_INVALID;
 75
 76		case SAS_OPEN_TO:
 77		case SAS_OPEN_REJECT:
 78			SAS_DPRINTK("%s: Saw error %d.  What to do?\n",
 79				    __func__, ts->stat);
 80			return AC_ERR_OTHER;
 81
 82		case SAM_STAT_CHECK_CONDITION:
 83		case SAS_ABORTED_TASK:
 84			return AC_ERR_DEV;
 85
 86		case SAS_PROTO_RESPONSE:
 87			/* This means the ending_fis has the error
 88			 * value; return 0 here to collect it */
 89			return 0;
 90		default:
 91			return 0;
 92	}
 93}
 94
 95static void sas_ata_task_done(struct sas_task *task)
 96{
 97	struct ata_queued_cmd *qc = task->uldd_task;
 98	struct domain_device *dev = task->dev;
 99	struct task_status_struct *stat = &task->task_status;
100	struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf;
101	struct sas_ha_struct *sas_ha = dev->port->ha;
102	enum ata_completion_errors ac;
103	unsigned long flags;
104	struct ata_link *link;
105	struct ata_port *ap;
106
107	spin_lock_irqsave(&dev->done_lock, flags);
108	if (test_bit(SAS_HA_FROZEN, &sas_ha->state))
109		task = NULL;
110	else if (qc && qc->scsicmd)
111		ASSIGN_SAS_TASK(qc->scsicmd, NULL);
112	spin_unlock_irqrestore(&dev->done_lock, flags);
113
114	/* check if libsas-eh got to the task before us */
115	if (unlikely(!task))
116		return;
117
118	if (!qc)
119		goto qc_already_gone;
120
121	ap = qc->ap;
122	link = &ap->link;
123
124	spin_lock_irqsave(ap->lock, flags);
125	/* check if we lost the race with libata/sas_ata_post_internal() */
126	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) {
127		spin_unlock_irqrestore(ap->lock, flags);
128		if (qc->scsicmd)
129			goto qc_already_gone;
130		else {
131			/* if eh is not involved and the port is frozen then the
132			 * ata internal abort process has taken responsibility
133			 * for this sas_task
134			 */
135			return;
136		}
137	}
138
139	if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
140	    ((stat->stat == SAM_STAT_CHECK_CONDITION &&
141	      dev->sata_dev.class == ATA_DEV_ATAPI))) {
142		memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
143
144		if (!link->sactive) {
145			qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
146		} else {
147			link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
148			if (unlikely(link->eh_info.err_mask))
149				qc->flags |= ATA_QCFLAG_FAILED;
150		}
151	} else {
152		ac = sas_to_ata_err(stat);
153		if (ac) {
154			SAS_DPRINTK("%s: SAS error %x\n", __func__,
155				    stat->stat);
156			/* We saw a SAS error. Send a vague error. */
157			if (!link->sactive) {
158				qc->err_mask = ac;
159			} else {
160				link->eh_info.err_mask |= AC_ERR_DEV;
161				qc->flags |= ATA_QCFLAG_FAILED;
162			}
163
164			dev->sata_dev.fis[3] = 0x04; /* status err */
165			dev->sata_dev.fis[2] = ATA_ERR;
166		}
167	}
168
169	qc->lldd_task = NULL;
170	ata_qc_complete(qc);
171	spin_unlock_irqrestore(ap->lock, flags);
172
173qc_already_gone:
 
174	sas_free_task(task);
175}
176
177static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
178{
179	unsigned long flags;
180	struct sas_task *task;
181	struct scatterlist *sg;
182	int ret = AC_ERR_SYSTEM;
183	unsigned int si, xfer = 0;
184	struct ata_port *ap = qc->ap;
185	struct domain_device *dev = ap->private_data;
186	struct sas_ha_struct *sas_ha = dev->port->ha;
187	struct Scsi_Host *host = sas_ha->core.shost;
188	struct sas_internal *i = to_sas_internal(host->transportt);
189
190	/* TODO: audit callers to ensure they are ready for qc_issue to
191	 * unconditionally re-enable interrupts
192	 */
193	local_irq_save(flags);
194	spin_unlock(ap->lock);
195
196	/* If the device fell off, no sense in issuing commands */
197	if (test_bit(SAS_DEV_GONE, &dev->state))
198		goto out;
199
200	task = sas_alloc_task(GFP_ATOMIC);
201	if (!task)
202		goto out;
203	task->dev = dev;
204	task->task_proto = SAS_PROTOCOL_STP;
205	task->task_done = sas_ata_task_done;
206
207	if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
208	    qc->tf.command == ATA_CMD_FPDMA_READ ||
209	    qc->tf.command == ATA_CMD_FPDMA_RECV ||
210	    qc->tf.command == ATA_CMD_FPDMA_SEND ||
211	    qc->tf.command == ATA_CMD_NCQ_NON_DATA) {
212		/* Need to zero out the tag libata assigned us */
213		qc->tf.nsect = 0;
214	}
215
216	ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis);
217	task->uldd_task = qc;
218	if (ata_is_atapi(qc->tf.protocol)) {
219		memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
220		task->total_xfer_len = qc->nbytes;
221		task->num_scatter = qc->n_elem;
222	} else {
223		for_each_sg(qc->sg, sg, qc->n_elem, si)
224			xfer += sg_dma_len(sg);
225
226		task->total_xfer_len = xfer;
227		task->num_scatter = si;
228	}
229
230	task->data_dir = qc->dma_dir;
231	task->scatter = qc->sg;
232	task->ata_task.retry_count = 1;
233	task->task_state_flags = SAS_TASK_STATE_PENDING;
234	qc->lldd_task = task;
235
236	task->ata_task.use_ncq = ata_is_ncq(qc->tf.protocol);
237	task->ata_task.dma_xfer = ata_is_dma(qc->tf.protocol);
 
 
 
 
 
 
 
238
239	if (qc->scsicmd)
240		ASSIGN_SAS_TASK(qc->scsicmd, task);
241
242	ret = i->dft->lldd_execute_task(task, GFP_ATOMIC);
 
 
 
 
 
243	if (ret) {
244		SAS_DPRINTK("lldd_execute_task returned: %d\n", ret);
245
246		if (qc->scsicmd)
247			ASSIGN_SAS_TASK(qc->scsicmd, NULL);
248		sas_free_task(task);
249		qc->lldd_task = NULL;
250		ret = AC_ERR_SYSTEM;
251	}
252
253 out:
254	spin_lock(ap->lock);
255	local_irq_restore(flags);
256	return ret;
257}
258
259static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc)
260{
261	struct domain_device *dev = qc->ap->private_data;
262
263	ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf);
264	return true;
265}
266
267static struct sas_internal *dev_to_sas_internal(struct domain_device *dev)
268{
269	return to_sas_internal(dev->port->ha->core.shost->transportt);
270}
271
272static int sas_get_ata_command_set(struct domain_device *dev);
273
274int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
275{
276	if (phy->attached_tproto & SAS_PROTOCOL_STP)
277		dev->tproto = phy->attached_tproto;
278	if (phy->attached_sata_dev)
279		dev->tproto |= SAS_SATA_DEV;
280
281	if (phy->attached_dev_type == SAS_SATA_PENDING)
282		dev->dev_type = SAS_SATA_PENDING;
283	else {
284		int res;
285
286		dev->dev_type = SAS_SATA_DEV;
287		res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
288					      &dev->sata_dev.rps_resp);
289		if (res) {
290			SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
291				    "0x%x\n", SAS_ADDR(dev->parent->sas_addr),
292				    phy->phy_id, res);
293			return res;
294		}
295		memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis,
296		       sizeof(struct dev_to_host_fis));
297		dev->sata_dev.class = sas_get_ata_command_set(dev);
 
298	}
299	return 0;
300}
301
302static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy)
303{
304	int res;
305
306	/* we weren't pending, so successfully end the reset sequence now */
307	if (dev->dev_type != SAS_SATA_PENDING)
308		return 1;
309
310	/* hmmm, if this succeeds do we need to repost the domain_device to the
311	 * lldd so it can pick up new parameters?
312	 */
313	res = sas_get_ata_info(dev, phy);
314	if (res)
315		return 0; /* retry */
316	else
317		return 1;
318}
319
320static int smp_ata_check_ready(struct ata_link *link)
321{
322	int res;
323	struct ata_port *ap = link->ap;
324	struct domain_device *dev = ap->private_data;
325	struct domain_device *ex_dev = dev->parent;
326	struct sas_phy *phy = sas_get_local_phy(dev);
327	struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number];
328
329	res = sas_ex_phy_discover(ex_dev, phy->number);
330	sas_put_local_phy(phy);
331
332	/* break the wait early if the expander is unreachable,
333	 * otherwise keep polling
334	 */
335	if (res == -ECOMM)
336		return res;
337	if (res != SMP_RESP_FUNC_ACC)
338		return 0;
339
340	switch (ex_phy->attached_dev_type) {
341	case SAS_SATA_PENDING:
342		return 0;
343	case SAS_END_DEVICE:
344		if (ex_phy->attached_sata_dev)
345			return sas_ata_clear_pending(dev, ex_phy);
346		/* fall through */
347	default:
348		return -ENODEV;
349	}
350}
351
352static int local_ata_check_ready(struct ata_link *link)
353{
354	struct ata_port *ap = link->ap;
355	struct domain_device *dev = ap->private_data;
356	struct sas_internal *i = dev_to_sas_internal(dev);
357
358	if (i->dft->lldd_ata_check_ready)
359		return i->dft->lldd_ata_check_ready(dev);
360	else {
361		/* lldd's that don't implement 'ready' checking get the
362		 * old default behavior of not coordinating reset
363		 * recovery with libata
364		 */
365		return 1;
366	}
367}
368
369static int sas_ata_printk(const char *level, const struct domain_device *ddev,
370			  const char *fmt, ...)
371{
372	struct ata_port *ap = ddev->sata_dev.ap;
373	struct device *dev = &ddev->rphy->dev;
374	struct va_format vaf;
375	va_list args;
376	int r;
377
378	va_start(args, fmt);
379
380	vaf.fmt = fmt;
381	vaf.va = &args;
382
383	r = printk("%ssas: ata%u: %s: %pV",
384		   level, ap->print_id, dev_name(dev), &vaf);
385
386	va_end(args);
387
388	return r;
389}
390
391static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class,
392			      unsigned long deadline)
393{
394	int ret = 0, res;
395	struct sas_phy *phy;
396	struct ata_port *ap = link->ap;
397	int (*check_ready)(struct ata_link *link);
398	struct domain_device *dev = ap->private_data;
399	struct sas_internal *i = dev_to_sas_internal(dev);
400
401	res = i->dft->lldd_I_T_nexus_reset(dev);
402	if (res == -ENODEV)
403		return res;
404
405	if (res != TMF_RESP_FUNC_COMPLETE)
406		sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n");
407
408	phy = sas_get_local_phy(dev);
409	if (scsi_is_sas_phy_local(phy))
410		check_ready = local_ata_check_ready;
411	else
412		check_ready = smp_ata_check_ready;
413	sas_put_local_phy(phy);
414
415	ret = ata_wait_after_reset(link, deadline, check_ready);
416	if (ret && ret != -EAGAIN)
417		sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret);
418
419	*class = dev->sata_dev.class;
 
 
 
 
 
 
 
 
 
 
 
420
421	ap->cbl = ATA_CBL_SATA;
422	return ret;
423}
424
425/*
426 * notify the lldd to forget the sas_task for this internal ata command
427 * that bypasses scsi-eh
428 */
429static void sas_ata_internal_abort(struct sas_task *task)
430{
431	struct sas_internal *si = dev_to_sas_internal(task->dev);
432	unsigned long flags;
433	int res;
434
435	spin_lock_irqsave(&task->task_state_lock, flags);
436	if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
437	    task->task_state_flags & SAS_TASK_STATE_DONE) {
438		spin_unlock_irqrestore(&task->task_state_lock, flags);
439		SAS_DPRINTK("%s: Task %p already finished.\n", __func__,
440			    task);
441		goto out;
442	}
443	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
444	spin_unlock_irqrestore(&task->task_state_lock, flags);
445
446	res = si->dft->lldd_abort_task(task);
447
448	spin_lock_irqsave(&task->task_state_lock, flags);
449	if (task->task_state_flags & SAS_TASK_STATE_DONE ||
450	    res == TMF_RESP_FUNC_COMPLETE) {
451		spin_unlock_irqrestore(&task->task_state_lock, flags);
452		goto out;
453	}
454
455	/* XXX we are not prepared to deal with ->lldd_abort_task()
456	 * failures.  TODO: lldds need to unconditionally forget about
457	 * aborted ata tasks, otherwise we (likely) leak the sas task
458	 * here
459	 */
460	SAS_DPRINTK("%s: Task %p leaked.\n", __func__, task);
461
462	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
463		task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
464	spin_unlock_irqrestore(&task->task_state_lock, flags);
465
466	return;
467 out:
 
468	sas_free_task(task);
469}
470
471static void sas_ata_post_internal(struct ata_queued_cmd *qc)
472{
473	if (qc->flags & ATA_QCFLAG_FAILED)
474		qc->err_mask |= AC_ERR_OTHER;
475
476	if (qc->err_mask) {
477		/*
478		 * Find the sas_task and kill it.  By this point, libata
479		 * has decided to kill the qc and has frozen the port.
480		 * In this state sas_ata_task_done() will no longer free
481		 * the sas_task, so we need to notify the lldd (via
482		 * ->lldd_abort_task) that the task is dead and free it
483		 *  ourselves.
484		 */
485		struct sas_task *task = qc->lldd_task;
486
487		qc->lldd_task = NULL;
488		if (!task)
489			return;
490		task->uldd_task = NULL;
491		sas_ata_internal_abort(task);
492	}
493}
494
495
496static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev)
497{
498	struct domain_device *dev = ap->private_data;
499	struct sas_internal *i = dev_to_sas_internal(dev);
500
501	if (i->dft->lldd_ata_set_dmamode)
502		i->dft->lldd_ata_set_dmamode(dev);
503}
504
505static void sas_ata_sched_eh(struct ata_port *ap)
506{
507	struct domain_device *dev = ap->private_data;
508	struct sas_ha_struct *ha = dev->port->ha;
509	unsigned long flags;
510
511	spin_lock_irqsave(&ha->lock, flags);
512	if (!test_and_set_bit(SAS_DEV_EH_PENDING, &dev->state))
513		ha->eh_active++;
514	ata_std_sched_eh(ap);
515	spin_unlock_irqrestore(&ha->lock, flags);
516}
517
518void sas_ata_end_eh(struct ata_port *ap)
519{
520	struct domain_device *dev = ap->private_data;
521	struct sas_ha_struct *ha = dev->port->ha;
522	unsigned long flags;
523
524	spin_lock_irqsave(&ha->lock, flags);
525	if (test_and_clear_bit(SAS_DEV_EH_PENDING, &dev->state))
526		ha->eh_active--;
527	spin_unlock_irqrestore(&ha->lock, flags);
528}
529
530static struct ata_port_operations sas_sata_ops = {
531	.prereset		= ata_std_prereset,
532	.hardreset		= sas_ata_hard_reset,
533	.postreset		= ata_std_postreset,
534	.error_handler		= ata_std_error_handler,
535	.post_internal_cmd	= sas_ata_post_internal,
536	.qc_defer               = ata_std_qc_defer,
537	.qc_prep		= ata_noop_qc_prep,
538	.qc_issue		= sas_ata_qc_issue,
539	.qc_fill_rtf		= sas_ata_qc_fill_rtf,
540	.port_start		= ata_sas_port_start,
541	.port_stop		= ata_sas_port_stop,
542	.set_dmamode		= sas_ata_set_dmamode,
543	.sched_eh		= sas_ata_sched_eh,
544	.end_eh			= sas_ata_end_eh,
545};
546
547static struct ata_port_info sata_port_info = {
548	.flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ |
549		 ATA_FLAG_SAS_HOST | ATA_FLAG_FPDMA_AUX,
550	.pio_mask = ATA_PIO4,
551	.mwdma_mask = ATA_MWDMA2,
552	.udma_mask = ATA_UDMA6,
553	.port_ops = &sas_sata_ops
554};
555
556int sas_ata_init(struct domain_device *found_dev)
557{
558	struct sas_ha_struct *ha = found_dev->port->ha;
559	struct Scsi_Host *shost = ha->core.shost;
560	struct ata_port *ap;
561	int rc;
562
563	ata_host_init(&found_dev->sata_dev.ata_host, ha->dev, &sas_sata_ops);
 
 
 
564	ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host,
565				&sata_port_info,
566				shost);
567	if (!ap) {
568		SAS_DPRINTK("ata_sas_port_alloc failed.\n");
569		return -ENODEV;
570	}
571
572	ap->private_data = found_dev;
573	ap->cbl = ATA_CBL_SATA;
574	ap->scsi_host = shost;
575	rc = ata_sas_port_init(ap);
576	if (rc) {
577		ata_sas_port_destroy(ap);
578		return rc;
579	}
580	found_dev->sata_dev.ap = ap;
581
582	return 0;
583}
584
585void sas_ata_task_abort(struct sas_task *task)
586{
587	struct ata_queued_cmd *qc = task->uldd_task;
588	struct completion *waiting;
589
590	/* Bounce SCSI-initiated commands to the SCSI EH */
591	if (qc->scsicmd) {
592		struct request_queue *q = qc->scsicmd->device->request_queue;
593		unsigned long flags;
594
595		spin_lock_irqsave(q->queue_lock, flags);
596		blk_abort_request(qc->scsicmd->request);
597		spin_unlock_irqrestore(q->queue_lock, flags);
 
598		return;
599	}
600
601	/* Internal command, fake a timeout and complete. */
602	qc->flags &= ~ATA_QCFLAG_ACTIVE;
603	qc->flags |= ATA_QCFLAG_FAILED;
604	qc->err_mask |= AC_ERR_TIMEOUT;
605	waiting = qc->private_data;
606	complete(waiting);
607}
608
609static int sas_get_ata_command_set(struct domain_device *dev)
610{
611	struct dev_to_host_fis *fis =
612		(struct dev_to_host_fis *) dev->frame_rcvd;
613	struct ata_taskfile tf;
614
615	if (dev->dev_type == SAS_SATA_PENDING)
616		return ATA_DEV_UNKNOWN;
617
618	ata_tf_from_fis((const u8 *)fis, &tf);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
619
620	return ata_dev_classify(&tf);
 
621}
622
623void sas_probe_sata(struct asd_sas_port *port)
624{
625	struct domain_device *dev, *n;
626
627	mutex_lock(&port->ha->disco_mutex);
628	list_for_each_entry(dev, &port->disco_list, disco_list_node) {
629		if (!dev_is_sata(dev))
630			continue;
631
632		ata_sas_async_probe(dev->sata_dev.ap);
633	}
634	mutex_unlock(&port->ha->disco_mutex);
635
636	list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) {
637		if (!dev_is_sata(dev))
638			continue;
639
640		sas_ata_wait_eh(dev);
641
642		/* if libata could not bring the link up, don't surface
643		 * the device
644		 */
645		if (ata_dev_disabled(sas_to_ata_dev(dev)))
646			sas_fail_probe(dev, __func__, -ENODEV);
647	}
648
649}
650
651static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func)
652{
653	struct domain_device *dev, *n;
654
655	list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) {
656		if (!dev_is_sata(dev))
657			continue;
658
659		sas_ata_wait_eh(dev);
660
661		/* if libata failed to power manage the device, tear it down */
662		if (ata_dev_disabled(sas_to_ata_dev(dev)))
663			sas_fail_probe(dev, func, -ENODEV);
664	}
665}
666
667void sas_suspend_sata(struct asd_sas_port *port)
668{
669	struct domain_device *dev;
670
671	mutex_lock(&port->ha->disco_mutex);
672	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
673		struct sata_device *sata;
674
675		if (!dev_is_sata(dev))
676			continue;
677
678		sata = &dev->sata_dev;
679		if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND)
680			continue;
681
682		ata_sas_port_suspend(sata->ap);
683	}
684	mutex_unlock(&port->ha->disco_mutex);
685
686	sas_ata_flush_pm_eh(port, __func__);
687}
688
689void sas_resume_sata(struct asd_sas_port *port)
690{
691	struct domain_device *dev;
692
693	mutex_lock(&port->ha->disco_mutex);
694	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
695		struct sata_device *sata;
696
697		if (!dev_is_sata(dev))
698			continue;
699
700		sata = &dev->sata_dev;
701		if (sata->ap->pm_mesg.event == PM_EVENT_ON)
702			continue;
703
704		ata_sas_port_resume(sata->ap);
705	}
706	mutex_unlock(&port->ha->disco_mutex);
707
708	sas_ata_flush_pm_eh(port, __func__);
709}
710
711/**
712 * sas_discover_sata - discover an STP/SATA domain device
713 * @dev: pointer to struct domain_device of interest
714 *
715 * Devices directly attached to a HA port, have no parents.  All other
716 * devices do, and should have their "parent" pointer set appropriately
717 * before calling this function.
718 */
719int sas_discover_sata(struct domain_device *dev)
720{
721	int res;
722
723	if (dev->dev_type == SAS_SATA_PM)
724		return -ENODEV;
725
726	dev->sata_dev.class = sas_get_ata_command_set(dev);
727	sas_fill_in_rphy(dev, dev->rphy);
728
729	res = sas_notify_lldd_dev_found(dev);
730	if (res)
731		return res;
732
 
733	return 0;
734}
735
736static void async_sas_ata_eh(void *data, async_cookie_t cookie)
737{
738	struct domain_device *dev = data;
739	struct ata_port *ap = dev->sata_dev.ap;
740	struct sas_ha_struct *ha = dev->port->ha;
741
 
 
 
 
742	sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n");
743	ata_scsi_port_error_handler(ha->core.shost, ap);
744	sas_put_device(dev);
745}
746
747void sas_ata_strategy_handler(struct Scsi_Host *shost)
748{
749	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
750	ASYNC_DOMAIN_EXCLUSIVE(async);
751	int i;
752
753	/* it's ok to defer revalidation events during ata eh, these
754	 * disks are in one of three states:
755	 * 1/ present for initial domain discovery, and these
756	 *    resets will cause bcn flutters
757	 * 2/ hot removed, we'll discover that after eh fails
758	 * 3/ hot added after initial discovery, lost the race, and need
759	 *    to catch the next train.
760	 */
761	sas_disable_revalidation(sas_ha);
762
763	spin_lock_irq(&sas_ha->phy_port_lock);
764	for (i = 0; i < sas_ha->num_phys; i++) {
765		struct asd_sas_port *port = sas_ha->sas_port[i];
766		struct domain_device *dev;
767
768		spin_lock(&port->dev_list_lock);
769		list_for_each_entry(dev, &port->dev_list, dev_list_node) {
770			if (!dev_is_sata(dev))
771				continue;
772
773			/* hold a reference over eh since we may be
774			 * racing with final remove once all commands
775			 * are completed
776			 */
777			kref_get(&dev->kref);
778
779			async_schedule_domain(async_sas_ata_eh, dev, &async);
780		}
781		spin_unlock(&port->dev_list_lock);
782	}
783	spin_unlock_irq(&sas_ha->phy_port_lock);
784
785	async_synchronize_full_domain(&async);
786
787	sas_enable_revalidation(sas_ha);
788}
789
790void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
791		struct list_head *done_q)
792{
793	struct scsi_cmnd *cmd, *n;
794	struct domain_device *eh_dev;
795
796	do {
797		LIST_HEAD(sata_q);
798		eh_dev = NULL;
799
800		list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
801			struct domain_device *ddev = cmd_to_domain_dev(cmd);
802
803			if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd))
804				continue;
805			if (eh_dev && eh_dev != ddev)
806				continue;
807			eh_dev = ddev;
808			list_move(&cmd->eh_entry, &sata_q);
809		}
810
811		if (!list_empty(&sata_q)) {
812			struct ata_port *ap = eh_dev->sata_dev.ap;
813
814			sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n");
815			ata_scsi_cmd_error_handler(shost, ap, &sata_q);
816			/*
817			 * ata's error handler may leave the cmd on the list
818			 * so make sure they don't remain on a stack list
819			 * about to go out of scope.
820			 *
821			 * This looks strange, since the commands are
822			 * now part of no list, but the next error
823			 * action will be ata_port_error_handler()
824			 * which takes no list and sweeps them up
825			 * anyway from the ata tag array.
826			 */
827			while (!list_empty(&sata_q))
828				list_del_init(sata_q.next);
829		}
830	} while (eh_dev);
831}
832
833void sas_ata_schedule_reset(struct domain_device *dev)
834{
835	struct ata_eh_info *ehi;
836	struct ata_port *ap;
837	unsigned long flags;
838
839	if (!dev_is_sata(dev))
840		return;
841
842	ap = dev->sata_dev.ap;
843	ehi = &ap->link.eh_info;
844
845	spin_lock_irqsave(ap->lock, flags);
846	ehi->err_mask |= AC_ERR_TIMEOUT;
847	ehi->action |= ATA_EH_RESET;
848	ata_port_schedule_eh(ap);
849	spin_unlock_irqrestore(ap->lock, flags);
850}
851EXPORT_SYMBOL_GPL(sas_ata_schedule_reset);
852
853void sas_ata_wait_eh(struct domain_device *dev)
854{
855	struct ata_port *ap;
856
857	if (!dev_is_sata(dev))
858		return;
859
860	ap = dev->sata_dev.ap;
861	ata_port_wait_eh(ap);
862}
v3.5.6
  1/*
  2 * Support for SATA devices on Serial Attached SCSI (SAS) controllers
  3 *
  4 * Copyright (C) 2006 IBM Corporation
  5 *
  6 * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
  7 *
  8 * This program is free software; you can redistribute it and/or
  9 * modify it under the terms of the GNU General Public License as
 10 * published by the Free Software Foundation; either version 2 of the
 11 * License, or (at your option) any later version.
 12 *
 13 * This program is distributed in the hope that it will be useful, but
 14 * WITHOUT ANY WARRANTY; without even the implied warranty of
 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 16 * General Public License for more details.
 17 *
 18 * You should have received a copy of the GNU General Public License
 19 * along with this program; if not, write to the Free Software
 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
 21 * USA
 22 */
 23
 24#include <linux/scatterlist.h>
 25#include <linux/slab.h>
 26#include <linux/async.h>
 27#include <linux/export.h>
 28
 29#include <scsi/sas_ata.h>
 30#include "sas_internal.h"
 31#include <scsi/scsi_host.h>
 32#include <scsi/scsi_device.h>
 33#include <scsi/scsi_tcq.h>
 34#include <scsi/scsi.h>
 35#include <scsi/scsi_transport.h>
 36#include <scsi/scsi_transport_sas.h>
 37#include "../scsi_sas_internal.h"
 38#include "../scsi_transport_api.h"
 39#include <scsi/scsi_eh.h>
 40
 41static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
 42{
 43	/* Cheesy attempt to translate SAS errors into ATA.  Hah! */
 44
 45	/* transport error */
 46	if (ts->resp == SAS_TASK_UNDELIVERED)
 47		return AC_ERR_ATA_BUS;
 48
 49	/* ts->resp == SAS_TASK_COMPLETE */
 50	/* task delivered, what happened afterwards? */
 51	switch (ts->stat) {
 52		case SAS_DEV_NO_RESPONSE:
 53			return AC_ERR_TIMEOUT;
 54
 55		case SAS_INTERRUPTED:
 56		case SAS_PHY_DOWN:
 57		case SAS_NAK_R_ERR:
 58			return AC_ERR_ATA_BUS;
 59
 60
 61		case SAS_DATA_UNDERRUN:
 62			/*
 63			 * Some programs that use the taskfile interface
 64			 * (smartctl in particular) can cause underrun
 65			 * problems.  Ignore these errors, perhaps at our
 66			 * peril.
 67			 */
 68			return 0;
 69
 70		case SAS_DATA_OVERRUN:
 71		case SAS_QUEUE_FULL:
 72		case SAS_DEVICE_UNKNOWN:
 73		case SAS_SG_ERR:
 74			return AC_ERR_INVALID;
 75
 76		case SAS_OPEN_TO:
 77		case SAS_OPEN_REJECT:
 78			SAS_DPRINTK("%s: Saw error %d.  What to do?\n",
 79				    __func__, ts->stat);
 80			return AC_ERR_OTHER;
 81
 82		case SAM_STAT_CHECK_CONDITION:
 83		case SAS_ABORTED_TASK:
 84			return AC_ERR_DEV;
 85
 86		case SAS_PROTO_RESPONSE:
 87			/* This means the ending_fis has the error
 88			 * value; return 0 here to collect it */
 89			return 0;
 90		default:
 91			return 0;
 92	}
 93}
 94
 95static void sas_ata_task_done(struct sas_task *task)
 96{
 97	struct ata_queued_cmd *qc = task->uldd_task;
 98	struct domain_device *dev = task->dev;
 99	struct task_status_struct *stat = &task->task_status;
100	struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf;
101	struct sas_ha_struct *sas_ha = dev->port->ha;
102	enum ata_completion_errors ac;
103	unsigned long flags;
104	struct ata_link *link;
105	struct ata_port *ap;
106
107	spin_lock_irqsave(&dev->done_lock, flags);
108	if (test_bit(SAS_HA_FROZEN, &sas_ha->state))
109		task = NULL;
110	else if (qc && qc->scsicmd)
111		ASSIGN_SAS_TASK(qc->scsicmd, NULL);
112	spin_unlock_irqrestore(&dev->done_lock, flags);
113
114	/* check if libsas-eh got to the task before us */
115	if (unlikely(!task))
116		return;
117
118	if (!qc)
119		goto qc_already_gone;
120
121	ap = qc->ap;
122	link = &ap->link;
123
124	spin_lock_irqsave(ap->lock, flags);
125	/* check if we lost the race with libata/sas_ata_post_internal() */
126	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) {
127		spin_unlock_irqrestore(ap->lock, flags);
128		if (qc->scsicmd)
129			goto qc_already_gone;
130		else {
131			/* if eh is not involved and the port is frozen then the
132			 * ata internal abort process has taken responsibility
133			 * for this sas_task
134			 */
135			return;
136		}
137	}
138
139	if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
140	    ((stat->stat == SAM_STAT_CHECK_CONDITION &&
141	      dev->sata_dev.command_set == ATAPI_COMMAND_SET))) {
142		memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
143
144		if (!link->sactive) {
145			qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
146		} else {
147			link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
148			if (unlikely(link->eh_info.err_mask))
149				qc->flags |= ATA_QCFLAG_FAILED;
150		}
151	} else {
152		ac = sas_to_ata_err(stat);
153		if (ac) {
154			SAS_DPRINTK("%s: SAS error %x\n", __func__,
155				    stat->stat);
156			/* We saw a SAS error. Send a vague error. */
157			if (!link->sactive) {
158				qc->err_mask = ac;
159			} else {
160				link->eh_info.err_mask |= AC_ERR_DEV;
161				qc->flags |= ATA_QCFLAG_FAILED;
162			}
163
164			dev->sata_dev.fis[3] = 0x04; /* status err */
165			dev->sata_dev.fis[2] = ATA_ERR;
166		}
167	}
168
169	qc->lldd_task = NULL;
170	ata_qc_complete(qc);
171	spin_unlock_irqrestore(ap->lock, flags);
172
173qc_already_gone:
174	list_del_init(&task->list);
175	sas_free_task(task);
176}
177
178static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
179{
180	unsigned long flags;
181	struct sas_task *task;
182	struct scatterlist *sg;
183	int ret = AC_ERR_SYSTEM;
184	unsigned int si, xfer = 0;
185	struct ata_port *ap = qc->ap;
186	struct domain_device *dev = ap->private_data;
187	struct sas_ha_struct *sas_ha = dev->port->ha;
188	struct Scsi_Host *host = sas_ha->core.shost;
189	struct sas_internal *i = to_sas_internal(host->transportt);
190
191	/* TODO: audit callers to ensure they are ready for qc_issue to
192	 * unconditionally re-enable interrupts
193	 */
194	local_irq_save(flags);
195	spin_unlock(ap->lock);
196
197	/* If the device fell off, no sense in issuing commands */
198	if (test_bit(SAS_DEV_GONE, &dev->state))
199		goto out;
200
201	task = sas_alloc_task(GFP_ATOMIC);
202	if (!task)
203		goto out;
204	task->dev = dev;
205	task->task_proto = SAS_PROTOCOL_STP;
206	task->task_done = sas_ata_task_done;
207
208	if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
209	    qc->tf.command == ATA_CMD_FPDMA_READ) {
 
 
 
210		/* Need to zero out the tag libata assigned us */
211		qc->tf.nsect = 0;
212	}
213
214	ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis);
215	task->uldd_task = qc;
216	if (ata_is_atapi(qc->tf.protocol)) {
217		memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
218		task->total_xfer_len = qc->nbytes;
219		task->num_scatter = qc->n_elem;
220	} else {
221		for_each_sg(qc->sg, sg, qc->n_elem, si)
222			xfer += sg->length;
223
224		task->total_xfer_len = xfer;
225		task->num_scatter = si;
226	}
227
228	task->data_dir = qc->dma_dir;
229	task->scatter = qc->sg;
230	task->ata_task.retry_count = 1;
231	task->task_state_flags = SAS_TASK_STATE_PENDING;
232	qc->lldd_task = task;
233
234	switch (qc->tf.protocol) {
235	case ATA_PROT_NCQ:
236		task->ata_task.use_ncq = 1;
237		/* fall through */
238	case ATAPI_PROT_DMA:
239	case ATA_PROT_DMA:
240		task->ata_task.dma_xfer = 1;
241		break;
242	}
243
244	if (qc->scsicmd)
245		ASSIGN_SAS_TASK(qc->scsicmd, task);
246
247	if (sas_ha->lldd_max_execute_num < 2)
248		ret = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
249	else
250		ret = sas_queue_up(task);
251
252	/* Examine */
253	if (ret) {
254		SAS_DPRINTK("lldd_execute_task returned: %d\n", ret);
255
256		if (qc->scsicmd)
257			ASSIGN_SAS_TASK(qc->scsicmd, NULL);
258		sas_free_task(task);
 
259		ret = AC_ERR_SYSTEM;
260	}
261
262 out:
263	spin_lock(ap->lock);
264	local_irq_restore(flags);
265	return ret;
266}
267
268static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc)
269{
270	struct domain_device *dev = qc->ap->private_data;
271
272	ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf);
273	return true;
274}
275
276static struct sas_internal *dev_to_sas_internal(struct domain_device *dev)
277{
278	return to_sas_internal(dev->port->ha->core.shost->transportt);
279}
280
281static void sas_get_ata_command_set(struct domain_device *dev);
282
283int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
284{
285	if (phy->attached_tproto & SAS_PROTOCOL_STP)
286		dev->tproto = phy->attached_tproto;
287	if (phy->attached_sata_dev)
288		dev->tproto |= SATA_DEV;
289
290	if (phy->attached_dev_type == SATA_PENDING)
291		dev->dev_type = SATA_PENDING;
292	else {
293		int res;
294
295		dev->dev_type = SATA_DEV;
296		res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
297					      &dev->sata_dev.rps_resp);
298		if (res) {
299			SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
300				    "0x%x\n", SAS_ADDR(dev->parent->sas_addr),
301				    phy->phy_id, res);
302			return res;
303		}
304		memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis,
305		       sizeof(struct dev_to_host_fis));
306		/* TODO switch to ata_dev_classify() */
307		sas_get_ata_command_set(dev);
308	}
309	return 0;
310}
311
312static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy)
313{
314	int res;
315
316	/* we weren't pending, so successfully end the reset sequence now */
317	if (dev->dev_type != SATA_PENDING)
318		return 1;
319
320	/* hmmm, if this succeeds do we need to repost the domain_device to the
321	 * lldd so it can pick up new parameters?
322	 */
323	res = sas_get_ata_info(dev, phy);
324	if (res)
325		return 0; /* retry */
326	else
327		return 1;
328}
329
330static int smp_ata_check_ready(struct ata_link *link)
331{
332	int res;
333	struct ata_port *ap = link->ap;
334	struct domain_device *dev = ap->private_data;
335	struct domain_device *ex_dev = dev->parent;
336	struct sas_phy *phy = sas_get_local_phy(dev);
337	struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number];
338
339	res = sas_ex_phy_discover(ex_dev, phy->number);
340	sas_put_local_phy(phy);
341
342	/* break the wait early if the expander is unreachable,
343	 * otherwise keep polling
344	 */
345	if (res == -ECOMM)
346		return res;
347	if (res != SMP_RESP_FUNC_ACC)
348		return 0;
349
350	switch (ex_phy->attached_dev_type) {
351	case SATA_PENDING:
352		return 0;
353	case SAS_END_DEV:
354		if (ex_phy->attached_sata_dev)
355			return sas_ata_clear_pending(dev, ex_phy);
 
356	default:
357		return -ENODEV;
358	}
359}
360
361static int local_ata_check_ready(struct ata_link *link)
362{
363	struct ata_port *ap = link->ap;
364	struct domain_device *dev = ap->private_data;
365	struct sas_internal *i = dev_to_sas_internal(dev);
366
367	if (i->dft->lldd_ata_check_ready)
368		return i->dft->lldd_ata_check_ready(dev);
369	else {
370		/* lldd's that don't implement 'ready' checking get the
371		 * old default behavior of not coordinating reset
372		 * recovery with libata
373		 */
374		return 1;
375	}
376}
377
378static int sas_ata_printk(const char *level, const struct domain_device *ddev,
379			  const char *fmt, ...)
380{
381	struct ata_port *ap = ddev->sata_dev.ap;
382	struct device *dev = &ddev->rphy->dev;
383	struct va_format vaf;
384	va_list args;
385	int r;
386
387	va_start(args, fmt);
388
389	vaf.fmt = fmt;
390	vaf.va = &args;
391
392	r = printk("%ssas: ata%u: %s: %pV",
393		   level, ap->print_id, dev_name(dev), &vaf);
394
395	va_end(args);
396
397	return r;
398}
399
400static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class,
401			      unsigned long deadline)
402{
403	int ret = 0, res;
404	struct sas_phy *phy;
405	struct ata_port *ap = link->ap;
406	int (*check_ready)(struct ata_link *link);
407	struct domain_device *dev = ap->private_data;
408	struct sas_internal *i = dev_to_sas_internal(dev);
409
410	res = i->dft->lldd_I_T_nexus_reset(dev);
411	if (res == -ENODEV)
412		return res;
413
414	if (res != TMF_RESP_FUNC_COMPLETE)
415		sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n");
416
417	phy = sas_get_local_phy(dev);
418	if (scsi_is_sas_phy_local(phy))
419		check_ready = local_ata_check_ready;
420	else
421		check_ready = smp_ata_check_ready;
422	sas_put_local_phy(phy);
423
424	ret = ata_wait_after_reset(link, deadline, check_ready);
425	if (ret && ret != -EAGAIN)
426		sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret);
427
428	/* XXX: if the class changes during the reset the upper layer
429	 * should be informed, if the device has gone away we assume
430	 * libsas will eventually delete it
431	 */
432	switch (dev->sata_dev.command_set) {
433	case ATA_COMMAND_SET:
434		*class = ATA_DEV_ATA;
435		break;
436	case ATAPI_COMMAND_SET:
437		*class = ATA_DEV_ATAPI;
438		break;
439	}
440
441	ap->cbl = ATA_CBL_SATA;
442	return ret;
443}
444
445/*
446 * notify the lldd to forget the sas_task for this internal ata command
447 * that bypasses scsi-eh
448 */
449static void sas_ata_internal_abort(struct sas_task *task)
450{
451	struct sas_internal *si = dev_to_sas_internal(task->dev);
452	unsigned long flags;
453	int res;
454
455	spin_lock_irqsave(&task->task_state_lock, flags);
456	if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
457	    task->task_state_flags & SAS_TASK_STATE_DONE) {
458		spin_unlock_irqrestore(&task->task_state_lock, flags);
459		SAS_DPRINTK("%s: Task %p already finished.\n", __func__,
460			    task);
461		goto out;
462	}
463	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
464	spin_unlock_irqrestore(&task->task_state_lock, flags);
465
466	res = si->dft->lldd_abort_task(task);
467
468	spin_lock_irqsave(&task->task_state_lock, flags);
469	if (task->task_state_flags & SAS_TASK_STATE_DONE ||
470	    res == TMF_RESP_FUNC_COMPLETE) {
471		spin_unlock_irqrestore(&task->task_state_lock, flags);
472		goto out;
473	}
474
475	/* XXX we are not prepared to deal with ->lldd_abort_task()
476	 * failures.  TODO: lldds need to unconditionally forget about
477	 * aborted ata tasks, otherwise we (likely) leak the sas task
478	 * here
479	 */
480	SAS_DPRINTK("%s: Task %p leaked.\n", __func__, task);
481
482	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
483		task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
484	spin_unlock_irqrestore(&task->task_state_lock, flags);
485
486	return;
487 out:
488	list_del_init(&task->list);
489	sas_free_task(task);
490}
491
492static void sas_ata_post_internal(struct ata_queued_cmd *qc)
493{
494	if (qc->flags & ATA_QCFLAG_FAILED)
495		qc->err_mask |= AC_ERR_OTHER;
496
497	if (qc->err_mask) {
498		/*
499		 * Find the sas_task and kill it.  By this point, libata
500		 * has decided to kill the qc and has frozen the port.
501		 * In this state sas_ata_task_done() will no longer free
502		 * the sas_task, so we need to notify the lldd (via
503		 * ->lldd_abort_task) that the task is dead and free it
504		 *  ourselves.
505		 */
506		struct sas_task *task = qc->lldd_task;
507
508		qc->lldd_task = NULL;
509		if (!task)
510			return;
511		task->uldd_task = NULL;
512		sas_ata_internal_abort(task);
513	}
514}
515
516
517static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev)
518{
519	struct domain_device *dev = ap->private_data;
520	struct sas_internal *i = dev_to_sas_internal(dev);
521
522	if (i->dft->lldd_ata_set_dmamode)
523		i->dft->lldd_ata_set_dmamode(dev);
524}
525
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
526static struct ata_port_operations sas_sata_ops = {
527	.prereset		= ata_std_prereset,
528	.hardreset		= sas_ata_hard_reset,
529	.postreset		= ata_std_postreset,
530	.error_handler		= ata_std_error_handler,
531	.post_internal_cmd	= sas_ata_post_internal,
532	.qc_defer               = ata_std_qc_defer,
533	.qc_prep		= ata_noop_qc_prep,
534	.qc_issue		= sas_ata_qc_issue,
535	.qc_fill_rtf		= sas_ata_qc_fill_rtf,
536	.port_start		= ata_sas_port_start,
537	.port_stop		= ata_sas_port_stop,
538	.set_dmamode		= sas_ata_set_dmamode,
 
 
539};
540
541static struct ata_port_info sata_port_info = {
542	.flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ,
 
543	.pio_mask = ATA_PIO4,
544	.mwdma_mask = ATA_MWDMA2,
545	.udma_mask = ATA_UDMA6,
546	.port_ops = &sas_sata_ops
547};
548
549int sas_ata_init(struct domain_device *found_dev)
550{
551	struct sas_ha_struct *ha = found_dev->port->ha;
552	struct Scsi_Host *shost = ha->core.shost;
553	struct ata_port *ap;
554	int rc;
555
556	ata_host_init(&found_dev->sata_dev.ata_host,
557		      ha->dev,
558		      sata_port_info.flags,
559		      &sas_sata_ops);
560	ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host,
561				&sata_port_info,
562				shost);
563	if (!ap) {
564		SAS_DPRINTK("ata_sas_port_alloc failed.\n");
565		return -ENODEV;
566	}
567
568	ap->private_data = found_dev;
569	ap->cbl = ATA_CBL_SATA;
570	ap->scsi_host = shost;
571	rc = ata_sas_port_init(ap);
572	if (rc) {
573		ata_sas_port_destroy(ap);
574		return rc;
575	}
576	found_dev->sata_dev.ap = ap;
577
578	return 0;
579}
580
581void sas_ata_task_abort(struct sas_task *task)
582{
583	struct ata_queued_cmd *qc = task->uldd_task;
584	struct completion *waiting;
585
586	/* Bounce SCSI-initiated commands to the SCSI EH */
587	if (qc->scsicmd) {
588		struct request_queue *q = qc->scsicmd->device->request_queue;
589		unsigned long flags;
590
591		spin_lock_irqsave(q->queue_lock, flags);
592		blk_abort_request(qc->scsicmd->request);
593		spin_unlock_irqrestore(q->queue_lock, flags);
594		scsi_schedule_eh(qc->scsicmd->device->host);
595		return;
596	}
597
598	/* Internal command, fake a timeout and complete. */
599	qc->flags &= ~ATA_QCFLAG_ACTIVE;
600	qc->flags |= ATA_QCFLAG_FAILED;
601	qc->err_mask |= AC_ERR_TIMEOUT;
602	waiting = qc->private_data;
603	complete(waiting);
604}
605
606static void sas_get_ata_command_set(struct domain_device *dev)
607{
608	struct dev_to_host_fis *fis =
609		(struct dev_to_host_fis *) dev->frame_rcvd;
 
610
611	if (dev->dev_type == SATA_PENDING)
612		return;
613
614	if ((fis->sector_count == 1 && /* ATA */
615	     fis->lbal         == 1 &&
616	     fis->lbam         == 0 &&
617	     fis->lbah         == 0 &&
618	     fis->device       == 0)
619	    ||
620	    (fis->sector_count == 0 && /* CE-ATA (mATA) */
621	     fis->lbal         == 0 &&
622	     fis->lbam         == 0xCE &&
623	     fis->lbah         == 0xAA &&
624	     (fis->device & ~0x10) == 0))
625
626		dev->sata_dev.command_set = ATA_COMMAND_SET;
627
628	else if ((fis->interrupt_reason == 1 &&	/* ATAPI */
629		  fis->lbal             == 1 &&
630		  fis->byte_count_low   == 0x14 &&
631		  fis->byte_count_high  == 0xEB &&
632		  (fis->device & ~0x10) == 0))
633
634		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
635
636	else if ((fis->sector_count == 1 && /* SEMB */
637		  fis->lbal         == 1 &&
638		  fis->lbam         == 0x3C &&
639		  fis->lbah         == 0xC3 &&
640		  fis->device       == 0)
641		||
642		 (fis->interrupt_reason == 1 &&	/* SATA PM */
643		  fis->lbal             == 1 &&
644		  fis->byte_count_low   == 0x69 &&
645		  fis->byte_count_high  == 0x96 &&
646		  (fis->device & ~0x10) == 0))
647
648		/* Treat it as a superset? */
649		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
650}
651
652void sas_probe_sata(struct asd_sas_port *port)
653{
654	struct domain_device *dev, *n;
655
656	mutex_lock(&port->ha->disco_mutex);
657	list_for_each_entry(dev, &port->disco_list, disco_list_node) {
658		if (!dev_is_sata(dev))
659			continue;
660
661		ata_sas_async_probe(dev->sata_dev.ap);
662	}
663	mutex_unlock(&port->ha->disco_mutex);
664
665	list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) {
666		if (!dev_is_sata(dev))
667			continue;
668
669		sas_ata_wait_eh(dev);
670
671		/* if libata could not bring the link up, don't surface
672		 * the device
673		 */
674		if (ata_dev_disabled(sas_to_ata_dev(dev)))
675			sas_fail_probe(dev, __func__, -ENODEV);
676	}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
677}
678
679/**
680 * sas_discover_sata -- discover an STP/SATA domain device
681 * @dev: pointer to struct domain_device of interest
682 *
683 * Devices directly attached to a HA port, have no parents.  All other
684 * devices do, and should have their "parent" pointer set appropriately
685 * before calling this function.
686 */
687int sas_discover_sata(struct domain_device *dev)
688{
689	int res;
690
691	if (dev->dev_type == SATA_PM)
692		return -ENODEV;
693
694	sas_get_ata_command_set(dev);
695	sas_fill_in_rphy(dev, dev->rphy);
696
697	res = sas_notify_lldd_dev_found(dev);
698	if (res)
699		return res;
700
701	sas_discover_event(dev->port, DISCE_PROBE);
702	return 0;
703}
704
705static void async_sas_ata_eh(void *data, async_cookie_t cookie)
706{
707	struct domain_device *dev = data;
708	struct ata_port *ap = dev->sata_dev.ap;
709	struct sas_ha_struct *ha = dev->port->ha;
710
711	/* hold a reference over eh since we may be racing with final
712	 * remove once all commands are completed
713	 */
714	kref_get(&dev->kref);
715	sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n");
716	ata_scsi_port_error_handler(ha->core.shost, ap);
717	sas_put_device(dev);
718}
719
720void sas_ata_strategy_handler(struct Scsi_Host *shost)
721{
722	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
723	LIST_HEAD(async);
724	int i;
725
726	/* it's ok to defer revalidation events during ata eh, these
727	 * disks are in one of three states:
728	 * 1/ present for initial domain discovery, and these
729	 *    resets will cause bcn flutters
730	 * 2/ hot removed, we'll discover that after eh fails
731	 * 3/ hot added after initial discovery, lost the race, and need
732	 *    to catch the next train.
733	 */
734	sas_disable_revalidation(sas_ha);
735
736	spin_lock_irq(&sas_ha->phy_port_lock);
737	for (i = 0; i < sas_ha->num_phys; i++) {
738		struct asd_sas_port *port = sas_ha->sas_port[i];
739		struct domain_device *dev;
740
741		spin_lock(&port->dev_list_lock);
742		list_for_each_entry(dev, &port->dev_list, dev_list_node) {
743			if (!dev_is_sata(dev))
744				continue;
 
 
 
 
 
 
 
745			async_schedule_domain(async_sas_ata_eh, dev, &async);
746		}
747		spin_unlock(&port->dev_list_lock);
748	}
749	spin_unlock_irq(&sas_ha->phy_port_lock);
750
751	async_synchronize_full_domain(&async);
752
753	sas_enable_revalidation(sas_ha);
754}
755
756void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
757		struct list_head *done_q)
758{
759	struct scsi_cmnd *cmd, *n;
760	struct domain_device *eh_dev;
761
762	do {
763		LIST_HEAD(sata_q);
764		eh_dev = NULL;
765
766		list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
767			struct domain_device *ddev = cmd_to_domain_dev(cmd);
768
769			if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd))
770				continue;
771			if (eh_dev && eh_dev != ddev)
772				continue;
773			eh_dev = ddev;
774			list_move(&cmd->eh_entry, &sata_q);
775		}
776
777		if (!list_empty(&sata_q)) {
778			struct ata_port *ap = eh_dev->sata_dev.ap;
779
780			sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n");
781			ata_scsi_cmd_error_handler(shost, ap, &sata_q);
782			/*
783			 * ata's error handler may leave the cmd on the list
784			 * so make sure they don't remain on a stack list
785			 * about to go out of scope.
786			 *
787			 * This looks strange, since the commands are
788			 * now part of no list, but the next error
789			 * action will be ata_port_error_handler()
790			 * which takes no list and sweeps them up
791			 * anyway from the ata tag array.
792			 */
793			while (!list_empty(&sata_q))
794				list_del_init(sata_q.next);
795		}
796	} while (eh_dev);
797}
798
799void sas_ata_schedule_reset(struct domain_device *dev)
800{
801	struct ata_eh_info *ehi;
802	struct ata_port *ap;
803	unsigned long flags;
804
805	if (!dev_is_sata(dev))
806		return;
807
808	ap = dev->sata_dev.ap;
809	ehi = &ap->link.eh_info;
810
811	spin_lock_irqsave(ap->lock, flags);
812	ehi->err_mask |= AC_ERR_TIMEOUT;
813	ehi->action |= ATA_EH_RESET;
814	ata_port_schedule_eh(ap);
815	spin_unlock_irqrestore(ap->lock, flags);
816}
817EXPORT_SYMBOL_GPL(sas_ata_schedule_reset);
818
819void sas_ata_wait_eh(struct domain_device *dev)
820{
821	struct ata_port *ap;
822
823	if (!dev_is_sata(dev))
824		return;
825
826	ap = dev->sata_dev.ap;
827	ata_port_wait_eh(ap);
828}