Loading...
1
2/*
3
4 Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
5
6 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
7
8 This program is free software; you may redistribute and/or modify it under
9 the terms of the GNU General Public License Version 2 as published by the
10 Free Software Foundation.
11
12 This program is distributed in the hope that it will be useful, but
13 WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
14 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
15 for complete details.
16
17 The author respectfully requests that any modifications to this software be
18 sent directly to him for evaluation and testing.
19
20 Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
21 advice has been invaluable, to David Gentzel, for writing the original Linux
22 BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
23
24 Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
25 Manager available as freely redistributable source code.
26
27*/
28
29#define blogic_drvr_version "2.1.17"
30#define blogic_drvr_date "12 September 2013"
31
32#include <linux/module.h>
33#include <linux/init.h>
34#include <linux/interrupt.h>
35#include <linux/types.h>
36#include <linux/blkdev.h>
37#include <linux/delay.h>
38#include <linux/ioport.h>
39#include <linux/mm.h>
40#include <linux/stat.h>
41#include <linux/pci.h>
42#include <linux/spinlock.h>
43#include <linux/jiffies.h>
44#include <linux/dma-mapping.h>
45#include <linux/slab.h>
46#include <scsi/scsicam.h>
47
48#include <asm/dma.h>
49#include <asm/io.h>
50
51#include <scsi/scsi.h>
52#include <scsi/scsi_cmnd.h>
53#include <scsi/scsi_device.h>
54#include <scsi/scsi_host.h>
55#include <scsi/scsi_tcq.h>
56#include "BusLogic.h"
57#include "FlashPoint.c"
58
59#ifndef FAILURE
60#define FAILURE (-1)
61#endif
62
63static struct scsi_host_template blogic_template;
64
65/*
66 blogic_drvr_options_count is a count of the number of BusLogic Driver
67 Options specifications provided via the Linux Kernel Command Line or via
68 the Loadable Kernel Module Installation Facility.
69*/
70
71static int blogic_drvr_options_count;
72
73
74/*
75 blogic_drvr_options is an array of Driver Options structures representing
76 BusLogic Driver Options specifications provided via the Linux Kernel Command
77 Line or via the Loadable Kernel Module Installation Facility.
78*/
79
80static struct blogic_drvr_options blogic_drvr_options[BLOGIC_MAX_ADAPTERS];
81
82
83/*
84 BusLogic can be assigned a string by insmod.
85*/
86
87MODULE_LICENSE("GPL");
88#ifdef MODULE
89static char *BusLogic;
90module_param(BusLogic, charp, 0);
91#endif
92
93
94/*
95 blogic_probe_options is a set of Probe Options to be applied across
96 all BusLogic Host Adapters.
97*/
98
99static struct blogic_probe_options blogic_probe_options;
100
101
102/*
103 blogic_global_options is a set of Global Options to be applied across
104 all BusLogic Host Adapters.
105*/
106
107static struct blogic_global_options blogic_global_options;
108
109static LIST_HEAD(blogic_host_list);
110
111/*
112 blogic_probeinfo_count is the number of entries in blogic_probeinfo_list.
113*/
114
115static int blogic_probeinfo_count;
116
117
118/*
119 blogic_probeinfo_list is the list of I/O Addresses and Bus Probe Information
120 to be checked for potential BusLogic Host Adapters. It is initialized by
121 interrogating the PCI Configuration Space on PCI machines as well as from the
122 list of standard BusLogic I/O Addresses.
123*/
124
125static struct blogic_probeinfo *blogic_probeinfo_list;
126
127
128/*
129 blogic_cmd_failure_reason holds a string identifying the reason why a
130 call to blogic_cmd failed. It is only non-NULL when blogic_cmd
131 returns a failure code.
132*/
133
134static char *blogic_cmd_failure_reason;
135
136/*
137 blogic_announce_drvr announces the Driver Version and Date, Author's
138 Name, Copyright Notice, and Electronic Mail Address.
139*/
140
141static void blogic_announce_drvr(struct blogic_adapter *adapter)
142{
143 blogic_announce("***** BusLogic SCSI Driver Version " blogic_drvr_version " of " blogic_drvr_date " *****\n", adapter);
144 blogic_announce("Copyright 1995-1998 by Leonard N. Zubkoff " "<lnz@dandelion.com>\n", adapter);
145}
146
147
148/*
149 blogic_drvr_info returns the Host Adapter Name to identify this SCSI
150 Driver and Host Adapter.
151*/
152
153static const char *blogic_drvr_info(struct Scsi_Host *host)
154{
155 struct blogic_adapter *adapter =
156 (struct blogic_adapter *) host->hostdata;
157 return adapter->full_model;
158}
159
160/*
161 blogic_init_ccbs initializes a group of Command Control Blocks (CCBs)
162 for Host Adapter from the blk_size bytes located at blk_pointer. The newly
163 created CCBs are added to Host Adapter's free list.
164*/
165
166static void blogic_init_ccbs(struct blogic_adapter *adapter, void *blk_pointer,
167 int blk_size, dma_addr_t blkp)
168{
169 struct blogic_ccb *ccb = (struct blogic_ccb *) blk_pointer;
170 unsigned int offset = 0;
171 memset(blk_pointer, 0, blk_size);
172 ccb->allocgrp_head = blkp;
173 ccb->allocgrp_size = blk_size;
174 while ((blk_size -= sizeof(struct blogic_ccb)) >= 0) {
175 ccb->status = BLOGIC_CCB_FREE;
176 ccb->adapter = adapter;
177 ccb->dma_handle = (u32) blkp + offset;
178 if (blogic_flashpoint_type(adapter)) {
179 ccb->callback = blogic_qcompleted_ccb;
180 ccb->base_addr = adapter->fpinfo.base_addr;
181 }
182 ccb->next = adapter->free_ccbs;
183 ccb->next_all = adapter->all_ccbs;
184 adapter->free_ccbs = ccb;
185 adapter->all_ccbs = ccb;
186 adapter->alloc_ccbs++;
187 ccb++;
188 offset += sizeof(struct blogic_ccb);
189 }
190}
191
192
193/*
194 blogic_create_initccbs allocates the initial CCBs for Host Adapter.
195*/
196
197static bool __init blogic_create_initccbs(struct blogic_adapter *adapter)
198{
199 int blk_size = BLOGIC_CCB_GRP_ALLOCSIZE * sizeof(struct blogic_ccb);
200 void *blk_pointer;
201 dma_addr_t blkp;
202
203 while (adapter->alloc_ccbs < adapter->initccbs) {
204 blk_pointer = pci_alloc_consistent(adapter->pci_device,
205 blk_size, &blkp);
206 if (blk_pointer == NULL) {
207 blogic_err("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n",
208 adapter);
209 return false;
210 }
211 blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp);
212 }
213 return true;
214}
215
216
217/*
218 blogic_destroy_ccbs deallocates the CCBs for Host Adapter.
219*/
220
221static void blogic_destroy_ccbs(struct blogic_adapter *adapter)
222{
223 struct blogic_ccb *next_ccb = adapter->all_ccbs, *ccb, *lastccb = NULL;
224 adapter->all_ccbs = NULL;
225 adapter->free_ccbs = NULL;
226 while ((ccb = next_ccb) != NULL) {
227 next_ccb = ccb->next_all;
228 if (ccb->allocgrp_head) {
229 if (lastccb)
230 pci_free_consistent(adapter->pci_device,
231 lastccb->allocgrp_size, lastccb,
232 lastccb->allocgrp_head);
233 lastccb = ccb;
234 }
235 }
236 if (lastccb)
237 pci_free_consistent(adapter->pci_device, lastccb->allocgrp_size,
238 lastccb, lastccb->allocgrp_head);
239}
240
241
242/*
243 blogic_create_addlccbs allocates Additional CCBs for Host Adapter. If
244 allocation fails and there are no remaining CCBs available, the Driver Queue
245 Depth is decreased to a known safe value to avoid potential deadlocks when
246 multiple host adapters share the same IRQ Channel.
247*/
248
249static void blogic_create_addlccbs(struct blogic_adapter *adapter,
250 int addl_ccbs, bool print_success)
251{
252 int blk_size = BLOGIC_CCB_GRP_ALLOCSIZE * sizeof(struct blogic_ccb);
253 int prev_alloc = adapter->alloc_ccbs;
254 void *blk_pointer;
255 dma_addr_t blkp;
256 if (addl_ccbs <= 0)
257 return;
258 while (adapter->alloc_ccbs - prev_alloc < addl_ccbs) {
259 blk_pointer = pci_alloc_consistent(adapter->pci_device,
260 blk_size, &blkp);
261 if (blk_pointer == NULL)
262 break;
263 blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp);
264 }
265 if (adapter->alloc_ccbs > prev_alloc) {
266 if (print_success)
267 blogic_notice("Allocated %d additional CCBs (total now %d)\n", adapter, adapter->alloc_ccbs - prev_alloc, adapter->alloc_ccbs);
268 return;
269 }
270 blogic_notice("Failed to allocate additional CCBs\n", adapter);
271 if (adapter->drvr_qdepth > adapter->alloc_ccbs - adapter->tgt_count) {
272 adapter->drvr_qdepth = adapter->alloc_ccbs - adapter->tgt_count;
273 adapter->scsi_host->can_queue = adapter->drvr_qdepth;
274 }
275}
276
277/*
278 blogic_alloc_ccb allocates a CCB from Host Adapter's free list,
279 allocating more memory from the Kernel if necessary. The Host Adapter's
280 Lock should already have been acquired by the caller.
281*/
282
283static struct blogic_ccb *blogic_alloc_ccb(struct blogic_adapter *adapter)
284{
285 static unsigned long serial;
286 struct blogic_ccb *ccb;
287 ccb = adapter->free_ccbs;
288 if (ccb != NULL) {
289 ccb->serial = ++serial;
290 adapter->free_ccbs = ccb->next;
291 ccb->next = NULL;
292 if (adapter->free_ccbs == NULL)
293 blogic_create_addlccbs(adapter, adapter->inc_ccbs,
294 true);
295 return ccb;
296 }
297 blogic_create_addlccbs(adapter, adapter->inc_ccbs, true);
298 ccb = adapter->free_ccbs;
299 if (ccb == NULL)
300 return NULL;
301 ccb->serial = ++serial;
302 adapter->free_ccbs = ccb->next;
303 ccb->next = NULL;
304 return ccb;
305}
306
307
308/*
309 blogic_dealloc_ccb deallocates a CCB, returning it to the Host Adapter's
310 free list. The Host Adapter's Lock should already have been acquired by the
311 caller.
312*/
313
314static void blogic_dealloc_ccb(struct blogic_ccb *ccb, int dma_unmap)
315{
316 struct blogic_adapter *adapter = ccb->adapter;
317
318 if (ccb->command != NULL)
319 scsi_dma_unmap(ccb->command);
320 if (dma_unmap)
321 pci_unmap_single(adapter->pci_device, ccb->sensedata,
322 ccb->sense_datalen, PCI_DMA_FROMDEVICE);
323
324 ccb->command = NULL;
325 ccb->status = BLOGIC_CCB_FREE;
326 ccb->next = adapter->free_ccbs;
327 adapter->free_ccbs = ccb;
328}
329
330
331/*
332 blogic_cmd sends the command opcode to adapter, optionally
333 providing paramlen bytes of param and receiving at most
334 replylen bytes of reply; any excess reply data is received but
335 discarded.
336
337 On success, this function returns the number of reply bytes read from
338 the Host Adapter (including any discarded data); on failure, it returns
339 -1 if the command was invalid, or -2 if a timeout occurred.
340
341 blogic_cmd is called exclusively during host adapter detection and
342 initialization, so performance and latency are not critical, and exclusive
343 access to the Host Adapter hardware is assumed. Once the host adapter and
344 driver are initialized, the only Host Adapter command that is issued is the
345 single byte Execute Mailbox Command operation code, which does not require
346 waiting for the Host Adapter Ready bit to be set in the Status Register.
347*/
348
349static int blogic_cmd(struct blogic_adapter *adapter, enum blogic_opcode opcode,
350 void *param, int paramlen, void *reply, int replylen)
351{
352 unsigned char *param_p = (unsigned char *) param;
353 unsigned char *reply_p = (unsigned char *) reply;
354 union blogic_stat_reg statusreg;
355 union blogic_int_reg intreg;
356 unsigned long processor_flag = 0;
357 int reply_b = 0, result;
358 long timeout;
359 /*
360 Clear out the Reply Data if provided.
361 */
362 if (replylen > 0)
363 memset(reply, 0, replylen);
364 /*
365 If the IRQ Channel has not yet been acquired, then interrupts
366 must be disabled while issuing host adapter commands since a
367 Command Complete interrupt could occur if the IRQ Channel was
368 previously enabled by another BusLogic Host Adapter or another
369 driver sharing the same IRQ Channel.
370 */
371 if (!adapter->irq_acquired)
372 local_irq_save(processor_flag);
373 /*
374 Wait for the Host Adapter Ready bit to be set and the
375 Command/Parameter Register Busy bit to be reset in the Status
376 Register.
377 */
378 timeout = 10000;
379 while (--timeout >= 0) {
380 statusreg.all = blogic_rdstatus(adapter);
381 if (statusreg.sr.adapter_ready && !statusreg.sr.cmd_param_busy)
382 break;
383 udelay(100);
384 }
385 if (timeout < 0) {
386 blogic_cmd_failure_reason =
387 "Timeout waiting for Host Adapter Ready";
388 result = -2;
389 goto done;
390 }
391 /*
392 Write the opcode to the Command/Parameter Register.
393 */
394 adapter->adapter_cmd_complete = false;
395 blogic_setcmdparam(adapter, opcode);
396 /*
397 Write any additional Parameter Bytes.
398 */
399 timeout = 10000;
400 while (paramlen > 0 && --timeout >= 0) {
401 /*
402 Wait 100 microseconds to give the Host Adapter enough
403 time to determine whether the last value written to the
404 Command/Parameter Register was valid or not. If the
405 Command Complete bit is set in the Interrupt Register,
406 then the Command Invalid bit in the Status Register will
407 be reset if the Operation Code or Parameter was valid
408 and the command has completed, or set if the Operation
409 Code or Parameter was invalid. If the Data In Register
410 Ready bit is set in the Status Register, then the
411 Operation Code was valid, and data is waiting to be read
412 back from the Host Adapter. Otherwise, wait for the
413 Command/Parameter Register Busy bit in the Status
414 Register to be reset.
415 */
416 udelay(100);
417 intreg.all = blogic_rdint(adapter);
418 statusreg.all = blogic_rdstatus(adapter);
419 if (intreg.ir.cmd_complete)
420 break;
421 if (adapter->adapter_cmd_complete)
422 break;
423 if (statusreg.sr.datain_ready)
424 break;
425 if (statusreg.sr.cmd_param_busy)
426 continue;
427 blogic_setcmdparam(adapter, *param_p++);
428 paramlen--;
429 }
430 if (timeout < 0) {
431 blogic_cmd_failure_reason =
432 "Timeout waiting for Parameter Acceptance";
433 result = -2;
434 goto done;
435 }
436 /*
437 The Modify I/O Address command does not cause a Command Complete
438 Interrupt.
439 */
440 if (opcode == BLOGIC_MOD_IOADDR) {
441 statusreg.all = blogic_rdstatus(adapter);
442 if (statusreg.sr.cmd_invalid) {
443 blogic_cmd_failure_reason =
444 "Modify I/O Address Invalid";
445 result = -1;
446 goto done;
447 }
448 if (blogic_global_options.trace_config)
449 blogic_notice("blogic_cmd(%02X) Status = %02X: " "(Modify I/O Address)\n", adapter, opcode, statusreg.all);
450 result = 0;
451 goto done;
452 }
453 /*
454 Select an appropriate timeout value for awaiting command completion.
455 */
456 switch (opcode) {
457 case BLOGIC_INQ_DEV0TO7:
458 case BLOGIC_INQ_DEV8TO15:
459 case BLOGIC_INQ_DEV:
460 /* Approximately 60 seconds. */
461 timeout = 60 * 10000;
462 break;
463 default:
464 /* Approximately 1 second. */
465 timeout = 10000;
466 break;
467 }
468 /*
469 Receive any Reply Bytes, waiting for either the Command
470 Complete bit to be set in the Interrupt Register, or for the
471 Interrupt Handler to set the Host Adapter Command Completed
472 bit in the Host Adapter structure.
473 */
474 while (--timeout >= 0) {
475 intreg.all = blogic_rdint(adapter);
476 statusreg.all = blogic_rdstatus(adapter);
477 if (intreg.ir.cmd_complete)
478 break;
479 if (adapter->adapter_cmd_complete)
480 break;
481 if (statusreg.sr.datain_ready) {
482 if (++reply_b <= replylen)
483 *reply_p++ = blogic_rddatain(adapter);
484 else
485 blogic_rddatain(adapter);
486 }
487 if (opcode == BLOGIC_FETCH_LOCALRAM &&
488 statusreg.sr.adapter_ready)
489 break;
490 udelay(100);
491 }
492 if (timeout < 0) {
493 blogic_cmd_failure_reason =
494 "Timeout waiting for Command Complete";
495 result = -2;
496 goto done;
497 }
498 /*
499 Clear any pending Command Complete Interrupt.
500 */
501 blogic_intreset(adapter);
502 /*
503 Provide tracing information if requested.
504 */
505 if (blogic_global_options.trace_config) {
506 int i;
507 blogic_notice("blogic_cmd(%02X) Status = %02X: %2d ==> %2d:",
508 adapter, opcode, statusreg.all, replylen,
509 reply_b);
510 if (replylen > reply_b)
511 replylen = reply_b;
512 for (i = 0; i < replylen; i++)
513 blogic_notice(" %02X", adapter,
514 ((unsigned char *) reply)[i]);
515 blogic_notice("\n", adapter);
516 }
517 /*
518 Process Command Invalid conditions.
519 */
520 if (statusreg.sr.cmd_invalid) {
521 /*
522 Some early BusLogic Host Adapters may not recover
523 properly from a Command Invalid condition, so if this
524 appears to be the case, a Soft Reset is issued to the
525 Host Adapter. Potentially invalid commands are never
526 attempted after Mailbox Initialization is performed,
527 so there should be no Host Adapter state lost by a
528 Soft Reset in response to a Command Invalid condition.
529 */
530 udelay(1000);
531 statusreg.all = blogic_rdstatus(adapter);
532 if (statusreg.sr.cmd_invalid || statusreg.sr.rsvd ||
533 statusreg.sr.datain_ready ||
534 statusreg.sr.cmd_param_busy ||
535 !statusreg.sr.adapter_ready ||
536 !statusreg.sr.init_reqd ||
537 statusreg.sr.diag_active ||
538 statusreg.sr.diag_failed) {
539 blogic_softreset(adapter);
540 udelay(1000);
541 }
542 blogic_cmd_failure_reason = "Command Invalid";
543 result = -1;
544 goto done;
545 }
546 /*
547 Handle Excess Parameters Supplied conditions.
548 */
549 if (paramlen > 0) {
550 blogic_cmd_failure_reason = "Excess Parameters Supplied";
551 result = -1;
552 goto done;
553 }
554 /*
555 Indicate the command completed successfully.
556 */
557 blogic_cmd_failure_reason = NULL;
558 result = reply_b;
559 /*
560 Restore the interrupt status if necessary and return.
561 */
562done:
563 if (!adapter->irq_acquired)
564 local_irq_restore(processor_flag);
565 return result;
566}
567
568
569/*
570 blogic_add_probeaddr_isa appends a single ISA I/O Address to the list
571 of I/O Address and Bus Probe Information to be checked for potential BusLogic
572 Host Adapters.
573*/
574
575static void __init blogic_add_probeaddr_isa(unsigned long io_addr)
576{
577 struct blogic_probeinfo *probeinfo;
578 if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS)
579 return;
580 probeinfo = &blogic_probeinfo_list[blogic_probeinfo_count++];
581 probeinfo->adapter_type = BLOGIC_MULTIMASTER;
582 probeinfo->adapter_bus_type = BLOGIC_ISA_BUS;
583 probeinfo->io_addr = io_addr;
584 probeinfo->pci_device = NULL;
585}
586
587
588/*
589 blogic_init_probeinfo_isa initializes the list of I/O Address and
590 Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters
591 only from the list of standard BusLogic MultiMaster ISA I/O Addresses.
592*/
593
594static void __init blogic_init_probeinfo_isa(struct blogic_adapter *adapter)
595{
596 /*
597 If BusLogic Driver Options specifications requested that ISA
598 Bus Probes be inhibited, do not proceed further.
599 */
600 if (blogic_probe_options.noprobe_isa)
601 return;
602 /*
603 Append the list of standard BusLogic MultiMaster ISA I/O Addresses.
604 */
605 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe330)
606 blogic_add_probeaddr_isa(0x330);
607 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe334)
608 blogic_add_probeaddr_isa(0x334);
609 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe230)
610 blogic_add_probeaddr_isa(0x230);
611 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe234)
612 blogic_add_probeaddr_isa(0x234);
613 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe130)
614 blogic_add_probeaddr_isa(0x130);
615 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe134)
616 blogic_add_probeaddr_isa(0x134);
617}
618
619
620#ifdef CONFIG_PCI
621
622
623/*
624 blogic_sort_probeinfo sorts a section of blogic_probeinfo_list in order
625 of increasing PCI Bus and Device Number.
626*/
627
628static void __init blogic_sort_probeinfo(struct blogic_probeinfo
629 *probeinfo_list, int probeinfo_cnt)
630{
631 int last_exchange = probeinfo_cnt - 1, bound, j;
632
633 while (last_exchange > 0) {
634 bound = last_exchange;
635 last_exchange = 0;
636 for (j = 0; j < bound; j++) {
637 struct blogic_probeinfo *probeinfo1 =
638 &probeinfo_list[j];
639 struct blogic_probeinfo *probeinfo2 =
640 &probeinfo_list[j + 1];
641 if (probeinfo1->bus > probeinfo2->bus ||
642 (probeinfo1->bus == probeinfo2->bus &&
643 (probeinfo1->dev > probeinfo2->dev))) {
644 struct blogic_probeinfo tmp_probeinfo;
645
646 memcpy(&tmp_probeinfo, probeinfo1,
647 sizeof(struct blogic_probeinfo));
648 memcpy(probeinfo1, probeinfo2,
649 sizeof(struct blogic_probeinfo));
650 memcpy(probeinfo2, &tmp_probeinfo,
651 sizeof(struct blogic_probeinfo));
652 last_exchange = j;
653 }
654 }
655 }
656}
657
658
659/*
660 blogic_init_mm_probeinfo initializes the list of I/O Address
661 and Bus Probe Information to be checked for potential BusLogic MultiMaster
662 SCSI Host Adapters by interrogating the PCI Configuration Space on PCI
663 machines as well as from the list of standard BusLogic MultiMaster ISA
664 I/O Addresses. It returns the number of PCI MultiMaster Host Adapters found.
665*/
666
667static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter)
668{
669 struct blogic_probeinfo *pr_probeinfo =
670 &blogic_probeinfo_list[blogic_probeinfo_count];
671 int nonpr_mmindex = blogic_probeinfo_count + 1;
672 int nonpr_mmcount = 0, mmcount = 0;
673 bool force_scan_order = false;
674 bool force_scan_order_checked = false;
675 bool addr_seen[6];
676 struct pci_dev *pci_device = NULL;
677 int i;
678 if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS)
679 return 0;
680 blogic_probeinfo_count++;
681 for (i = 0; i < 6; i++)
682 addr_seen[i] = false;
683 /*
684 Iterate over the MultiMaster PCI Host Adapters. For each
685 enumerated host adapter, determine whether its ISA Compatible
686 I/O Port is enabled and if so, whether it is assigned the
687 Primary I/O Address. A host adapter that is assigned the
688 Primary I/O Address will always be the preferred boot device.
689 The MultiMaster BIOS will first recognize a host adapter at
690 the Primary I/O Address, then any other PCI host adapters,
691 and finally any host adapters located at the remaining
692 standard ISA I/O Addresses. When a PCI host adapter is found
693 with its ISA Compatible I/O Port enabled, a command is issued
694 to disable the ISA Compatible I/O Port, and it is noted that the
695 particular standard ISA I/O Address need not be probed.
696 */
697 pr_probeinfo->io_addr = 0;
698 while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
699 PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER,
700 pci_device)) != NULL) {
701 struct blogic_adapter *host_adapter = adapter;
702 struct blogic_adapter_info adapter_info;
703 enum blogic_isa_ioport mod_ioaddr_req;
704 unsigned char bus;
705 unsigned char device;
706 unsigned int irq_ch;
707 unsigned long base_addr0;
708 unsigned long base_addr1;
709 unsigned long io_addr;
710 unsigned long pci_addr;
711
712 if (pci_enable_device(pci_device))
713 continue;
714
715 if (pci_set_dma_mask(pci_device, DMA_BIT_MASK(32)))
716 continue;
717
718 bus = pci_device->bus->number;
719 device = pci_device->devfn >> 3;
720 irq_ch = pci_device->irq;
721 io_addr = base_addr0 = pci_resource_start(pci_device, 0);
722 pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
723
724 if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
725 blogic_err("BusLogic: Base Address0 0x%X not I/O for " "MultiMaster Host Adapter\n", NULL, base_addr0);
726 blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
727 continue;
728 }
729 if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
730 blogic_err("BusLogic: Base Address1 0x%X not Memory for " "MultiMaster Host Adapter\n", NULL, base_addr1);
731 blogic_err("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, bus, device, pci_addr);
732 continue;
733 }
734 if (irq_ch == 0) {
735 blogic_err("BusLogic: IRQ Channel %d invalid for " "MultiMaster Host Adapter\n", NULL, irq_ch);
736 blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
737 continue;
738 }
739 if (blogic_global_options.trace_probe) {
740 blogic_notice("BusLogic: PCI MultiMaster Host Adapter " "detected at\n", NULL);
741 blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, bus, device, io_addr, pci_addr);
742 }
743 /*
744 Issue the Inquire PCI Host Adapter Information command to determine
745 the ISA Compatible I/O Port. If the ISA Compatible I/O Port is
746 known and enabled, note that the particular Standard ISA I/O
747 Address should not be probed.
748 */
749 host_adapter->io_addr = io_addr;
750 blogic_intreset(host_adapter);
751 if (blogic_cmd(host_adapter, BLOGIC_INQ_PCI_INFO, NULL, 0,
752 &adapter_info, sizeof(adapter_info)) ==
753 sizeof(adapter_info)) {
754 if (adapter_info.isa_port < 6)
755 addr_seen[adapter_info.isa_port] = true;
756 } else
757 adapter_info.isa_port = BLOGIC_IO_DISABLE;
758 /*
759 Issue the Modify I/O Address command to disable the
760 ISA Compatible I/O Port. On PCI Host Adapters, the
761 Modify I/O Address command allows modification of the
762 ISA compatible I/O Address that the Host Adapter
763 responds to; it does not affect the PCI compliant
764 I/O Address assigned at system initialization.
765 */
766 mod_ioaddr_req = BLOGIC_IO_DISABLE;
767 blogic_cmd(host_adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req,
768 sizeof(mod_ioaddr_req), NULL, 0);
769 /*
770 For the first MultiMaster Host Adapter enumerated,
771 issue the Fetch Host Adapter Local RAM command to read
772 byte 45 of the AutoSCSI area, for the setting of the
773 "Use Bus And Device # For PCI Scanning Seq." option.
774 Issue the Inquire Board ID command since this option is
775 only valid for the BT-948/958/958D.
776 */
777 if (!force_scan_order_checked) {
778 struct blogic_fetch_localram fetch_localram;
779 struct blogic_autoscsi_byte45 autoscsi_byte45;
780 struct blogic_board_id id;
781
782 fetch_localram.offset = BLOGIC_AUTOSCSI_BASE + 45;
783 fetch_localram.count = sizeof(autoscsi_byte45);
784 blogic_cmd(host_adapter, BLOGIC_FETCH_LOCALRAM,
785 &fetch_localram, sizeof(fetch_localram),
786 &autoscsi_byte45,
787 sizeof(autoscsi_byte45));
788 blogic_cmd(host_adapter, BLOGIC_GET_BOARD_ID, NULL, 0,
789 &id, sizeof(id));
790 if (id.fw_ver_digit1 == '5')
791 force_scan_order =
792 autoscsi_byte45.force_scan_order;
793 force_scan_order_checked = true;
794 }
795 /*
796 Determine whether this MultiMaster Host Adapter has its
797 ISA Compatible I/O Port enabled and is assigned the
798 Primary I/O Address. If it does, then it is the Primary
799 MultiMaster Host Adapter and must be recognized first.
800 If it does not, then it is added to the list for probing
801 after any Primary MultiMaster Host Adapter is probed.
802 */
803 if (adapter_info.isa_port == BLOGIC_IO_330) {
804 pr_probeinfo->adapter_type = BLOGIC_MULTIMASTER;
805 pr_probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
806 pr_probeinfo->io_addr = io_addr;
807 pr_probeinfo->pci_addr = pci_addr;
808 pr_probeinfo->bus = bus;
809 pr_probeinfo->dev = device;
810 pr_probeinfo->irq_ch = irq_ch;
811 pr_probeinfo->pci_device = pci_dev_get(pci_device);
812 mmcount++;
813 } else if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) {
814 struct blogic_probeinfo *probeinfo =
815 &blogic_probeinfo_list[blogic_probeinfo_count++];
816 probeinfo->adapter_type = BLOGIC_MULTIMASTER;
817 probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
818 probeinfo->io_addr = io_addr;
819 probeinfo->pci_addr = pci_addr;
820 probeinfo->bus = bus;
821 probeinfo->dev = device;
822 probeinfo->irq_ch = irq_ch;
823 probeinfo->pci_device = pci_dev_get(pci_device);
824 nonpr_mmcount++;
825 mmcount++;
826 } else
827 blogic_warn("BusLogic: Too many Host Adapters " "detected\n", NULL);
828 }
829 /*
830 If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq."
831 option is ON for the first enumerated MultiMaster Host Adapter,
832 and if that host adapter is a BT-948/958/958D, then the
833 MultiMaster BIOS will recognize MultiMaster Host Adapters in
834 the order of increasing PCI Bus and Device Number. In that case,
835 sort the probe information into the same order the BIOS uses.
836 If this option is OFF, then the MultiMaster BIOS will recognize
837 MultiMaster Host Adapters in the order they are enumerated by
838 the PCI BIOS, and hence no sorting is necessary.
839 */
840 if (force_scan_order)
841 blogic_sort_probeinfo(&blogic_probeinfo_list[nonpr_mmindex],
842 nonpr_mmcount);
843 /*
844 If no PCI MultiMaster Host Adapter is assigned the Primary
845 I/O Address, then the Primary I/O Address must be probed
846 explicitly before any PCI host adapters are probed.
847 */
848 if (!blogic_probe_options.noprobe_isa)
849 if (pr_probeinfo->io_addr == 0 &&
850 (!blogic_probe_options.limited_isa ||
851 blogic_probe_options.probe330)) {
852 pr_probeinfo->adapter_type = BLOGIC_MULTIMASTER;
853 pr_probeinfo->adapter_bus_type = BLOGIC_ISA_BUS;
854 pr_probeinfo->io_addr = 0x330;
855 }
856 /*
857 Append the list of standard BusLogic MultiMaster ISA I/O Addresses,
858 omitting the Primary I/O Address which has already been handled.
859 */
860 if (!blogic_probe_options.noprobe_isa) {
861 if (!addr_seen[1] &&
862 (!blogic_probe_options.limited_isa ||
863 blogic_probe_options.probe334))
864 blogic_add_probeaddr_isa(0x334);
865 if (!addr_seen[2] &&
866 (!blogic_probe_options.limited_isa ||
867 blogic_probe_options.probe230))
868 blogic_add_probeaddr_isa(0x230);
869 if (!addr_seen[3] &&
870 (!blogic_probe_options.limited_isa ||
871 blogic_probe_options.probe234))
872 blogic_add_probeaddr_isa(0x234);
873 if (!addr_seen[4] &&
874 (!blogic_probe_options.limited_isa ||
875 blogic_probe_options.probe130))
876 blogic_add_probeaddr_isa(0x130);
877 if (!addr_seen[5] &&
878 (!blogic_probe_options.limited_isa ||
879 blogic_probe_options.probe134))
880 blogic_add_probeaddr_isa(0x134);
881 }
882 /*
883 Iterate over the older non-compliant MultiMaster PCI Host Adapters,
884 noting the PCI bus location and assigned IRQ Channel.
885 */
886 pci_device = NULL;
887 while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
888 PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC,
889 pci_device)) != NULL) {
890 unsigned char bus;
891 unsigned char device;
892 unsigned int irq_ch;
893 unsigned long io_addr;
894
895 if (pci_enable_device(pci_device))
896 continue;
897
898 if (pci_set_dma_mask(pci_device, DMA_BIT_MASK(32)))
899 continue;
900
901 bus = pci_device->bus->number;
902 device = pci_device->devfn >> 3;
903 irq_ch = pci_device->irq;
904 io_addr = pci_resource_start(pci_device, 0);
905
906 if (io_addr == 0 || irq_ch == 0)
907 continue;
908 for (i = 0; i < blogic_probeinfo_count; i++) {
909 struct blogic_probeinfo *probeinfo =
910 &blogic_probeinfo_list[i];
911 if (probeinfo->io_addr == io_addr &&
912 probeinfo->adapter_type == BLOGIC_MULTIMASTER) {
913 probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
914 probeinfo->pci_addr = 0;
915 probeinfo->bus = bus;
916 probeinfo->dev = device;
917 probeinfo->irq_ch = irq_ch;
918 probeinfo->pci_device = pci_dev_get(pci_device);
919 break;
920 }
921 }
922 }
923 return mmcount;
924}
925
926
927/*
928 blogic_init_fp_probeinfo initializes the list of I/O Address
929 and Bus Probe Information to be checked for potential BusLogic FlashPoint
930 Host Adapters by interrogating the PCI Configuration Space. It returns the
931 number of FlashPoint Host Adapters found.
932*/
933
934static int __init blogic_init_fp_probeinfo(struct blogic_adapter *adapter)
935{
936 int fpindex = blogic_probeinfo_count, fpcount = 0;
937 struct pci_dev *pci_device = NULL;
938 /*
939 Interrogate PCI Configuration Space for any FlashPoint Host Adapters.
940 */
941 while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
942 PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT,
943 pci_device)) != NULL) {
944 unsigned char bus;
945 unsigned char device;
946 unsigned int irq_ch;
947 unsigned long base_addr0;
948 unsigned long base_addr1;
949 unsigned long io_addr;
950 unsigned long pci_addr;
951
952 if (pci_enable_device(pci_device))
953 continue;
954
955 if (pci_set_dma_mask(pci_device, DMA_BIT_MASK(32)))
956 continue;
957
958 bus = pci_device->bus->number;
959 device = pci_device->devfn >> 3;
960 irq_ch = pci_device->irq;
961 io_addr = base_addr0 = pci_resource_start(pci_device, 0);
962 pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
963#ifdef CONFIG_SCSI_FLASHPOINT
964 if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
965 blogic_err("BusLogic: Base Address0 0x%X not I/O for " "FlashPoint Host Adapter\n", NULL, base_addr0);
966 blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
967 continue;
968 }
969 if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
970 blogic_err("BusLogic: Base Address1 0x%X not Memory for " "FlashPoint Host Adapter\n", NULL, base_addr1);
971 blogic_err("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, bus, device, pci_addr);
972 continue;
973 }
974 if (irq_ch == 0) {
975 blogic_err("BusLogic: IRQ Channel %d invalid for " "FlashPoint Host Adapter\n", NULL, irq_ch);
976 blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
977 continue;
978 }
979 if (blogic_global_options.trace_probe) {
980 blogic_notice("BusLogic: FlashPoint Host Adapter " "detected at\n", NULL);
981 blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, bus, device, io_addr, pci_addr);
982 }
983 if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) {
984 struct blogic_probeinfo *probeinfo =
985 &blogic_probeinfo_list[blogic_probeinfo_count++];
986 probeinfo->adapter_type = BLOGIC_FLASHPOINT;
987 probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
988 probeinfo->io_addr = io_addr;
989 probeinfo->pci_addr = pci_addr;
990 probeinfo->bus = bus;
991 probeinfo->dev = device;
992 probeinfo->irq_ch = irq_ch;
993 probeinfo->pci_device = pci_dev_get(pci_device);
994 fpcount++;
995 } else
996 blogic_warn("BusLogic: Too many Host Adapters " "detected\n", NULL);
997#else
998 blogic_err("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", NULL, bus, device);
999 blogic_err("BusLogic: I/O Address 0x%X PCI Address 0x%X, irq %d, " "but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch);
1000 blogic_err("BusLogic: support was omitted in this kernel " "configuration.\n", NULL);
1001#endif
1002 }
1003 /*
1004 The FlashPoint BIOS will scan for FlashPoint Host Adapters in the order of
1005 increasing PCI Bus and Device Number, so sort the probe information into
1006 the same order the BIOS uses.
1007 */
1008 blogic_sort_probeinfo(&blogic_probeinfo_list[fpindex], fpcount);
1009 return fpcount;
1010}
1011
1012
1013/*
1014 blogic_init_probeinfo_list initializes the list of I/O Address and Bus
1015 Probe Information to be checked for potential BusLogic SCSI Host Adapters by
1016 interrogating the PCI Configuration Space on PCI machines as well as from the
1017 list of standard BusLogic MultiMaster ISA I/O Addresses. By default, if both
1018 FlashPoint and PCI MultiMaster Host Adapters are present, this driver will
1019 probe for FlashPoint Host Adapters first unless the BIOS primary disk is
1020 controlled by the first PCI MultiMaster Host Adapter, in which case
1021 MultiMaster Host Adapters will be probed first. The BusLogic Driver Options
1022 specifications "MultiMasterFirst" and "FlashPointFirst" can be used to force
1023 a particular probe order.
1024*/
1025
1026static void __init blogic_init_probeinfo_list(struct blogic_adapter *adapter)
1027{
1028 /*
1029 If a PCI BIOS is present, interrogate it for MultiMaster and
1030 FlashPoint Host Adapters; otherwise, default to the standard
1031 ISA MultiMaster probe.
1032 */
1033 if (!blogic_probe_options.noprobe_pci) {
1034 if (blogic_probe_options.multimaster_first) {
1035 blogic_init_mm_probeinfo(adapter);
1036 blogic_init_fp_probeinfo(adapter);
1037 } else if (blogic_probe_options.flashpoint_first) {
1038 blogic_init_fp_probeinfo(adapter);
1039 blogic_init_mm_probeinfo(adapter);
1040 } else {
1041 int fpcount = blogic_init_fp_probeinfo(adapter);
1042 int mmcount = blogic_init_mm_probeinfo(adapter);
1043 if (fpcount > 0 && mmcount > 0) {
1044 struct blogic_probeinfo *probeinfo =
1045 &blogic_probeinfo_list[fpcount];
1046 struct blogic_adapter *myadapter = adapter;
1047 struct blogic_fetch_localram fetch_localram;
1048 struct blogic_bios_drvmap d0_mapbyte;
1049
1050 while (probeinfo->adapter_bus_type !=
1051 BLOGIC_PCI_BUS)
1052 probeinfo++;
1053 myadapter->io_addr = probeinfo->io_addr;
1054 fetch_localram.offset =
1055 BLOGIC_BIOS_BASE + BLOGIC_BIOS_DRVMAP;
1056 fetch_localram.count = sizeof(d0_mapbyte);
1057 blogic_cmd(myadapter, BLOGIC_FETCH_LOCALRAM,
1058 &fetch_localram,
1059 sizeof(fetch_localram),
1060 &d0_mapbyte,
1061 sizeof(d0_mapbyte));
1062 /*
1063 If the Map Byte for BIOS Drive 0 indicates
1064 that BIOS Drive 0 is controlled by this
1065 PCI MultiMaster Host Adapter, then reverse
1066 the probe order so that MultiMaster Host
1067 Adapters are probed before FlashPoint Host
1068 Adapters.
1069 */
1070 if (d0_mapbyte.diskgeom != BLOGIC_BIOS_NODISK) {
1071 struct blogic_probeinfo saved_probeinfo[BLOGIC_MAX_ADAPTERS];
1072 int mmcount = blogic_probeinfo_count - fpcount;
1073
1074 memcpy(saved_probeinfo,
1075 blogic_probeinfo_list,
1076 blogic_probeinfo_count * sizeof(struct blogic_probeinfo));
1077 memcpy(&blogic_probeinfo_list[0],
1078 &saved_probeinfo[fpcount],
1079 mmcount * sizeof(struct blogic_probeinfo));
1080 memcpy(&blogic_probeinfo_list[mmcount],
1081 &saved_probeinfo[0],
1082 fpcount * sizeof(struct blogic_probeinfo));
1083 }
1084 }
1085 }
1086 } else {
1087 blogic_init_probeinfo_isa(adapter);
1088 }
1089}
1090
1091
1092#else
1093#define blogic_init_probeinfo_list(adapter) \
1094 blogic_init_probeinfo_isa(adapter)
1095#endif /* CONFIG_PCI */
1096
1097
1098/*
1099 blogic_failure prints a standardized error message, and then returns false.
1100*/
1101
1102static bool blogic_failure(struct blogic_adapter *adapter, char *msg)
1103{
1104 blogic_announce_drvr(adapter);
1105 if (adapter->adapter_bus_type == BLOGIC_PCI_BUS) {
1106 blogic_err("While configuring BusLogic PCI Host Adapter at\n",
1107 adapter);
1108 blogic_err("Bus %d Device %d I/O Address 0x%X PCI Address 0x%X:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr, adapter->pci_addr);
1109 } else
1110 blogic_err("While configuring BusLogic Host Adapter at " "I/O Address 0x%X:\n", adapter, adapter->io_addr);
1111 blogic_err("%s FAILED - DETACHING\n", adapter, msg);
1112 if (blogic_cmd_failure_reason != NULL)
1113 blogic_err("ADDITIONAL FAILURE INFO - %s\n", adapter,
1114 blogic_cmd_failure_reason);
1115 return false;
1116}
1117
1118
1119/*
1120 blogic_probe probes for a BusLogic Host Adapter.
1121*/
1122
1123static bool __init blogic_probe(struct blogic_adapter *adapter)
1124{
1125 union blogic_stat_reg statusreg;
1126 union blogic_int_reg intreg;
1127 union blogic_geo_reg georeg;
1128 /*
1129 FlashPoint Host Adapters are Probed by the FlashPoint SCCB Manager.
1130 */
1131 if (blogic_flashpoint_type(adapter)) {
1132 struct fpoint_info *fpinfo = &adapter->fpinfo;
1133 fpinfo->base_addr = (u32) adapter->io_addr;
1134 fpinfo->irq_ch = adapter->irq_ch;
1135 fpinfo->present = false;
1136 if (!(FlashPoint_ProbeHostAdapter(fpinfo) == 0 &&
1137 fpinfo->present)) {
1138 blogic_err("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", adapter, adapter->bus, adapter->dev);
1139 blogic_err("BusLogic: I/O Address 0x%X PCI Address 0x%X, " "but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_addr);
1140 blogic_err("BusLogic: Probe Function failed to validate it.\n", adapter);
1141 return false;
1142 }
1143 if (blogic_global_options.trace_probe)
1144 blogic_notice("BusLogic_Probe(0x%X): FlashPoint Found\n", adapter, adapter->io_addr);
1145 /*
1146 Indicate the Host Adapter Probe completed successfully.
1147 */
1148 return true;
1149 }
1150 /*
1151 Read the Status, Interrupt, and Geometry Registers to test if there are I/O
1152 ports that respond, and to check the values to determine if they are from a
1153 BusLogic Host Adapter. A nonexistent I/O port will return 0xFF, in which
1154 case there is definitely no BusLogic Host Adapter at this base I/O Address.
1155 The test here is a subset of that used by the BusLogic Host Adapter BIOS.
1156 */
1157 statusreg.all = blogic_rdstatus(adapter);
1158 intreg.all = blogic_rdint(adapter);
1159 georeg.all = blogic_rdgeom(adapter);
1160 if (blogic_global_options.trace_probe)
1161 blogic_notice("BusLogic_Probe(0x%X): Status 0x%02X, Interrupt 0x%02X, " "Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all, intreg.all, georeg.all);
1162 if (statusreg.all == 0 || statusreg.sr.diag_active ||
1163 statusreg.sr.cmd_param_busy || statusreg.sr.rsvd ||
1164 statusreg.sr.cmd_invalid || intreg.ir.rsvd != 0)
1165 return false;
1166 /*
1167 Check the undocumented Geometry Register to test if there is
1168 an I/O port that responded. Adaptec Host Adapters do not
1169 implement the Geometry Register, so this test helps serve to
1170 avoid incorrectly recognizing an Adaptec 1542A or 1542B as a
1171 BusLogic. Unfortunately, the Adaptec 1542C series does respond
1172 to the Geometry Register I/O port, but it will be rejected
1173 later when the Inquire Extended Setup Information command is
1174 issued in blogic_checkadapter. The AMI FastDisk Host Adapter
1175 is a BusLogic clone that implements the same interface as
1176 earlier BusLogic Host Adapters, including the undocumented
1177 commands, and is therefore supported by this driver. However,
1178 the AMI FastDisk always returns 0x00 upon reading the Geometry
1179 Register, so the extended translation option should always be
1180 left disabled on the AMI FastDisk.
1181 */
1182 if (georeg.all == 0xFF)
1183 return false;
1184 /*
1185 Indicate the Host Adapter Probe completed successfully.
1186 */
1187 return true;
1188}
1189
1190
1191/*
1192 blogic_hwreset issues a Hardware Reset to the Host Adapter
1193 and waits for Host Adapter Diagnostics to complete. If hard_reset is true, a
1194 Hard Reset is performed which also initiates a SCSI Bus Reset. Otherwise, a
1195 Soft Reset is performed which only resets the Host Adapter without forcing a
1196 SCSI Bus Reset.
1197*/
1198
1199static bool blogic_hwreset(struct blogic_adapter *adapter, bool hard_reset)
1200{
1201 union blogic_stat_reg statusreg;
1202 int timeout;
1203 /*
1204 FlashPoint Host Adapters are Hard Reset by the FlashPoint
1205 SCCB Manager.
1206 */
1207 if (blogic_flashpoint_type(adapter)) {
1208 struct fpoint_info *fpinfo = &adapter->fpinfo;
1209 fpinfo->softreset = !hard_reset;
1210 fpinfo->report_underrun = true;
1211 adapter->cardhandle =
1212 FlashPoint_HardwareResetHostAdapter(fpinfo);
1213 if (adapter->cardhandle == (void *)FPOINT_BADCARD_HANDLE)
1214 return false;
1215 /*
1216 Indicate the Host Adapter Hard Reset completed successfully.
1217 */
1218 return true;
1219 }
1220 /*
1221 Issue a Hard Reset or Soft Reset Command to the Host Adapter.
1222 The Host Adapter should respond by setting Diagnostic Active in
1223 the Status Register.
1224 */
1225 if (hard_reset)
1226 blogic_hardreset(adapter);
1227 else
1228 blogic_softreset(adapter);
1229 /*
1230 Wait until Diagnostic Active is set in the Status Register.
1231 */
1232 timeout = 5 * 10000;
1233 while (--timeout >= 0) {
1234 statusreg.all = blogic_rdstatus(adapter);
1235 if (statusreg.sr.diag_active)
1236 break;
1237 udelay(100);
1238 }
1239 if (blogic_global_options.trace_hw_reset)
1240 blogic_notice("BusLogic_HardwareReset(0x%X): Diagnostic Active, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1241 if (timeout < 0)
1242 return false;
1243 /*
1244 Wait 100 microseconds to allow completion of any initial diagnostic
1245 activity which might leave the contents of the Status Register
1246 unpredictable.
1247 */
1248 udelay(100);
1249 /*
1250 Wait until Diagnostic Active is reset in the Status Register.
1251 */
1252 timeout = 10 * 10000;
1253 while (--timeout >= 0) {
1254 statusreg.all = blogic_rdstatus(adapter);
1255 if (!statusreg.sr.diag_active)
1256 break;
1257 udelay(100);
1258 }
1259 if (blogic_global_options.trace_hw_reset)
1260 blogic_notice("BusLogic_HardwareReset(0x%X): Diagnostic Completed, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1261 if (timeout < 0)
1262 return false;
1263 /*
1264 Wait until at least one of the Diagnostic Failure, Host Adapter
1265 Ready, or Data In Register Ready bits is set in the Status Register.
1266 */
1267 timeout = 10000;
1268 while (--timeout >= 0) {
1269 statusreg.all = blogic_rdstatus(adapter);
1270 if (statusreg.sr.diag_failed || statusreg.sr.adapter_ready ||
1271 statusreg.sr.datain_ready)
1272 break;
1273 udelay(100);
1274 }
1275 if (blogic_global_options.trace_hw_reset)
1276 blogic_notice("BusLogic_HardwareReset(0x%X): Host Adapter Ready, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1277 if (timeout < 0)
1278 return false;
1279 /*
1280 If Diagnostic Failure is set or Host Adapter Ready is reset,
1281 then an error occurred during the Host Adapter diagnostics.
1282 If Data In Register Ready is set, then there is an Error Code
1283 available.
1284 */
1285 if (statusreg.sr.diag_failed || !statusreg.sr.adapter_ready) {
1286 blogic_cmd_failure_reason = NULL;
1287 blogic_failure(adapter, "HARD RESET DIAGNOSTICS");
1288 blogic_err("HOST ADAPTER STATUS REGISTER = %02X\n", adapter,
1289 statusreg.all);
1290 if (statusreg.sr.datain_ready)
1291 blogic_err("HOST ADAPTER ERROR CODE = %d\n", adapter,
1292 blogic_rddatain(adapter));
1293 return false;
1294 }
1295 /*
1296 Indicate the Host Adapter Hard Reset completed successfully.
1297 */
1298 return true;
1299}
1300
1301
1302/*
1303 blogic_checkadapter checks to be sure this really is a BusLogic
1304 Host Adapter.
1305*/
1306
1307static bool __init blogic_checkadapter(struct blogic_adapter *adapter)
1308{
1309 struct blogic_ext_setup ext_setupinfo;
1310 unsigned char req_replylen;
1311 bool result = true;
1312 /*
1313 FlashPoint Host Adapters do not require this protection.
1314 */
1315 if (blogic_flashpoint_type(adapter))
1316 return true;
1317 /*
1318 Issue the Inquire Extended Setup Information command. Only genuine
1319 BusLogic Host Adapters and true clones support this command.
1320 Adaptec 1542C series Host Adapters that respond to the Geometry
1321 Register I/O port will fail this command.
1322 */
1323 req_replylen = sizeof(ext_setupinfo);
1324 if (blogic_cmd(adapter, BLOGIC_INQ_EXTSETUP, &req_replylen,
1325 sizeof(req_replylen), &ext_setupinfo,
1326 sizeof(ext_setupinfo)) != sizeof(ext_setupinfo))
1327 result = false;
1328 /*
1329 Provide tracing information if requested and return.
1330 */
1331 if (blogic_global_options.trace_probe)
1332 blogic_notice("BusLogic_Check(0x%X): MultiMaster %s\n", adapter,
1333 adapter->io_addr,
1334 (result ? "Found" : "Not Found"));
1335 return result;
1336}
1337
1338
1339/*
1340 blogic_rdconfig reads the Configuration Information
1341 from Host Adapter and initializes the Host Adapter structure.
1342*/
1343
1344static bool __init blogic_rdconfig(struct blogic_adapter *adapter)
1345{
1346 struct blogic_board_id id;
1347 struct blogic_config config;
1348 struct blogic_setup_info setupinfo;
1349 struct blogic_ext_setup ext_setupinfo;
1350 unsigned char model[5];
1351 unsigned char fw_ver_digit3;
1352 unsigned char fw_ver_letter;
1353 struct blogic_adapter_info adapter_info;
1354 struct blogic_fetch_localram fetch_localram;
1355 struct blogic_autoscsi autoscsi;
1356 union blogic_geo_reg georeg;
1357 unsigned char req_replylen;
1358 unsigned char *tgt, ch;
1359 int tgt_id, i;
1360 /*
1361 Configuration Information for FlashPoint Host Adapters is
1362 provided in the fpoint_info structure by the FlashPoint
1363 SCCB Manager's Probe Function. Initialize fields in the
1364 Host Adapter structure from the fpoint_info structure.
1365 */
1366 if (blogic_flashpoint_type(adapter)) {
1367 struct fpoint_info *fpinfo = &adapter->fpinfo;
1368 tgt = adapter->model;
1369 *tgt++ = 'B';
1370 *tgt++ = 'T';
1371 *tgt++ = '-';
1372 for (i = 0; i < sizeof(fpinfo->model); i++)
1373 *tgt++ = fpinfo->model[i];
1374 *tgt++ = '\0';
1375 strcpy(adapter->fw_ver, FLASHPOINT_FW_VER);
1376 adapter->scsi_id = fpinfo->scsi_id;
1377 adapter->ext_trans_enable = fpinfo->ext_trans_enable;
1378 adapter->parity = fpinfo->parity;
1379 adapter->reset_enabled = !fpinfo->softreset;
1380 adapter->level_int = true;
1381 adapter->wide = fpinfo->wide;
1382 adapter->differential = false;
1383 adapter->scam = true;
1384 adapter->ultra = true;
1385 adapter->ext_lun = true;
1386 adapter->terminfo_valid = true;
1387 adapter->low_term = fpinfo->low_term;
1388 adapter->high_term = fpinfo->high_term;
1389 adapter->scam_enabled = fpinfo->scam_enabled;
1390 adapter->scam_lev2 = fpinfo->scam_lev2;
1391 adapter->drvr_sglimit = BLOGIC_SG_LIMIT;
1392 adapter->maxdev = (adapter->wide ? 16 : 8);
1393 adapter->maxlun = 32;
1394 adapter->initccbs = 4 * BLOGIC_CCB_GRP_ALLOCSIZE;
1395 adapter->inc_ccbs = BLOGIC_CCB_GRP_ALLOCSIZE;
1396 adapter->drvr_qdepth = 255;
1397 adapter->adapter_qdepth = adapter->drvr_qdepth;
1398 adapter->sync_ok = fpinfo->sync_ok;
1399 adapter->fast_ok = fpinfo->fast_ok;
1400 adapter->ultra_ok = fpinfo->ultra_ok;
1401 adapter->wide_ok = fpinfo->wide_ok;
1402 adapter->discon_ok = fpinfo->discon_ok;
1403 adapter->tagq_ok = 0xFFFF;
1404 goto common;
1405 }
1406 /*
1407 Issue the Inquire Board ID command.
1408 */
1409 if (blogic_cmd(adapter, BLOGIC_GET_BOARD_ID, NULL, 0, &id,
1410 sizeof(id)) != sizeof(id))
1411 return blogic_failure(adapter, "INQUIRE BOARD ID");
1412 /*
1413 Issue the Inquire Configuration command.
1414 */
1415 if (blogic_cmd(adapter, BLOGIC_INQ_CONFIG, NULL, 0, &config,
1416 sizeof(config))
1417 != sizeof(config))
1418 return blogic_failure(adapter, "INQUIRE CONFIGURATION");
1419 /*
1420 Issue the Inquire Setup Information command.
1421 */
1422 req_replylen = sizeof(setupinfo);
1423 if (blogic_cmd(adapter, BLOGIC_INQ_SETUPINFO, &req_replylen,
1424 sizeof(req_replylen), &setupinfo,
1425 sizeof(setupinfo)) != sizeof(setupinfo))
1426 return blogic_failure(adapter, "INQUIRE SETUP INFORMATION");
1427 /*
1428 Issue the Inquire Extended Setup Information command.
1429 */
1430 req_replylen = sizeof(ext_setupinfo);
1431 if (blogic_cmd(adapter, BLOGIC_INQ_EXTSETUP, &req_replylen,
1432 sizeof(req_replylen), &ext_setupinfo,
1433 sizeof(ext_setupinfo)) != sizeof(ext_setupinfo))
1434 return blogic_failure(adapter,
1435 "INQUIRE EXTENDED SETUP INFORMATION");
1436 /*
1437 Issue the Inquire Firmware Version 3rd Digit command.
1438 */
1439 fw_ver_digit3 = '\0';
1440 if (id.fw_ver_digit1 > '0')
1441 if (blogic_cmd(adapter, BLOGIC_INQ_FWVER_D3, NULL, 0,
1442 &fw_ver_digit3,
1443 sizeof(fw_ver_digit3)) != sizeof(fw_ver_digit3))
1444 return blogic_failure(adapter,
1445 "INQUIRE FIRMWARE 3RD DIGIT");
1446 /*
1447 Issue the Inquire Host Adapter Model Number command.
1448 */
1449 if (ext_setupinfo.bus_type == 'A' && id.fw_ver_digit1 == '2')
1450 /* BusLogic BT-542B ISA 2.xx */
1451 strcpy(model, "542B");
1452 else if (ext_setupinfo.bus_type == 'E' && id.fw_ver_digit1 == '2' &&
1453 (id.fw_ver_digit2 <= '1' || (id.fw_ver_digit2 == '2' &&
1454 fw_ver_digit3 == '0')))
1455 /* BusLogic BT-742A EISA 2.1x or 2.20 */
1456 strcpy(model, "742A");
1457 else if (ext_setupinfo.bus_type == 'E' && id.fw_ver_digit1 == '0')
1458 /* AMI FastDisk EISA Series 441 0.x */
1459 strcpy(model, "747A");
1460 else {
1461 req_replylen = sizeof(model);
1462 if (blogic_cmd(adapter, BLOGIC_INQ_MODELNO, &req_replylen,
1463 sizeof(req_replylen), &model,
1464 sizeof(model)) != sizeof(model))
1465 return blogic_failure(adapter,
1466 "INQUIRE HOST ADAPTER MODEL NUMBER");
1467 }
1468 /*
1469 BusLogic MultiMaster Host Adapters can be identified by their
1470 model number and the major version number of their firmware
1471 as follows:
1472
1473 5.xx BusLogic "W" Series Host Adapters:
1474 BT-948/958/958D
1475 4.xx BusLogic "C" Series Host Adapters:
1476 BT-946C/956C/956CD/747C/757C/757CD/445C/545C/540CF
1477 3.xx BusLogic "S" Series Host Adapters:
1478 BT-747S/747D/757S/757D/445S/545S/542D
1479 BT-542B/742A (revision H)
1480 2.xx BusLogic "A" Series Host Adapters:
1481 BT-542B/742A (revision G and below)
1482 0.xx AMI FastDisk VLB/EISA BusLogic Clone Host Adapter
1483 */
1484 /*
1485 Save the Model Name and Host Adapter Name in the Host Adapter
1486 structure.
1487 */
1488 tgt = adapter->model;
1489 *tgt++ = 'B';
1490 *tgt++ = 'T';
1491 *tgt++ = '-';
1492 for (i = 0; i < sizeof(model); i++) {
1493 ch = model[i];
1494 if (ch == ' ' || ch == '\0')
1495 break;
1496 *tgt++ = ch;
1497 }
1498 *tgt++ = '\0';
1499 /*
1500 Save the Firmware Version in the Host Adapter structure.
1501 */
1502 tgt = adapter->fw_ver;
1503 *tgt++ = id.fw_ver_digit1;
1504 *tgt++ = '.';
1505 *tgt++ = id.fw_ver_digit2;
1506 if (fw_ver_digit3 != ' ' && fw_ver_digit3 != '\0')
1507 *tgt++ = fw_ver_digit3;
1508 *tgt = '\0';
1509 /*
1510 Issue the Inquire Firmware Version Letter command.
1511 */
1512 if (strcmp(adapter->fw_ver, "3.3") >= 0) {
1513 if (blogic_cmd(adapter, BLOGIC_INQ_FWVER_LETTER, NULL, 0,
1514 &fw_ver_letter,
1515 sizeof(fw_ver_letter)) != sizeof(fw_ver_letter))
1516 return blogic_failure(adapter,
1517 "INQUIRE FIRMWARE VERSION LETTER");
1518 if (fw_ver_letter != ' ' && fw_ver_letter != '\0')
1519 *tgt++ = fw_ver_letter;
1520 *tgt = '\0';
1521 }
1522 /*
1523 Save the Host Adapter SCSI ID in the Host Adapter structure.
1524 */
1525 adapter->scsi_id = config.id;
1526 /*
1527 Determine the Bus Type and save it in the Host Adapter structure,
1528 determine and save the IRQ Channel if necessary, and determine
1529 and save the DMA Channel for ISA Host Adapters.
1530 */
1531 adapter->adapter_bus_type =
1532 blogic_adater_bus_types[adapter->model[3] - '4'];
1533 if (adapter->irq_ch == 0) {
1534 if (config.irq_ch9)
1535 adapter->irq_ch = 9;
1536 else if (config.irq_ch10)
1537 adapter->irq_ch = 10;
1538 else if (config.irq_ch11)
1539 adapter->irq_ch = 11;
1540 else if (config.irq_ch12)
1541 adapter->irq_ch = 12;
1542 else if (config.irq_ch14)
1543 adapter->irq_ch = 14;
1544 else if (config.irq_ch15)
1545 adapter->irq_ch = 15;
1546 }
1547 if (adapter->adapter_bus_type == BLOGIC_ISA_BUS) {
1548 if (config.dma_ch5)
1549 adapter->dma_ch = 5;
1550 else if (config.dma_ch6)
1551 adapter->dma_ch = 6;
1552 else if (config.dma_ch7)
1553 adapter->dma_ch = 7;
1554 }
1555 /*
1556 Determine whether Extended Translation is enabled and save it in
1557 the Host Adapter structure.
1558 */
1559 georeg.all = blogic_rdgeom(adapter);
1560 adapter->ext_trans_enable = georeg.gr.ext_trans_enable;
1561 /*
1562 Save the Scatter Gather Limits, Level Sensitive Interrupt flag, Wide
1563 SCSI flag, Differential SCSI flag, SCAM Supported flag, and
1564 Ultra SCSI flag in the Host Adapter structure.
1565 */
1566 adapter->adapter_sglimit = ext_setupinfo.sg_limit;
1567 adapter->drvr_sglimit = adapter->adapter_sglimit;
1568 if (adapter->adapter_sglimit > BLOGIC_SG_LIMIT)
1569 adapter->drvr_sglimit = BLOGIC_SG_LIMIT;
1570 if (ext_setupinfo.misc.level_int)
1571 adapter->level_int = true;
1572 adapter->wide = ext_setupinfo.wide;
1573 adapter->differential = ext_setupinfo.differential;
1574 adapter->scam = ext_setupinfo.scam;
1575 adapter->ultra = ext_setupinfo.ultra;
1576 /*
1577 Determine whether Extended LUN Format CCBs are supported and save the
1578 information in the Host Adapter structure.
1579 */
1580 if (adapter->fw_ver[0] == '5' || (adapter->fw_ver[0] == '4' &&
1581 adapter->wide))
1582 adapter->ext_lun = true;
1583 /*
1584 Issue the Inquire PCI Host Adapter Information command to read the
1585 Termination Information from "W" series MultiMaster Host Adapters.
1586 */
1587 if (adapter->fw_ver[0] == '5') {
1588 if (blogic_cmd(adapter, BLOGIC_INQ_PCI_INFO, NULL, 0,
1589 &adapter_info,
1590 sizeof(adapter_info)) != sizeof(adapter_info))
1591 return blogic_failure(adapter,
1592 "INQUIRE PCI HOST ADAPTER INFORMATION");
1593 /*
1594 Save the Termination Information in the Host Adapter
1595 structure.
1596 */
1597 if (adapter_info.genericinfo_valid) {
1598 adapter->terminfo_valid = true;
1599 adapter->low_term = adapter_info.low_term;
1600 adapter->high_term = adapter_info.high_term;
1601 }
1602 }
1603 /*
1604 Issue the Fetch Host Adapter Local RAM command to read the
1605 AutoSCSI data from "W" and "C" series MultiMaster Host Adapters.
1606 */
1607 if (adapter->fw_ver[0] >= '4') {
1608 fetch_localram.offset = BLOGIC_AUTOSCSI_BASE;
1609 fetch_localram.count = sizeof(autoscsi);
1610 if (blogic_cmd(adapter, BLOGIC_FETCH_LOCALRAM, &fetch_localram,
1611 sizeof(fetch_localram), &autoscsi,
1612 sizeof(autoscsi)) != sizeof(autoscsi))
1613 return blogic_failure(adapter,
1614 "FETCH HOST ADAPTER LOCAL RAM");
1615 /*
1616 Save the Parity Checking Enabled, Bus Reset Enabled,
1617 and Termination Information in the Host Adapter structure.
1618 */
1619 adapter->parity = autoscsi.parity;
1620 adapter->reset_enabled = autoscsi.reset_enabled;
1621 if (adapter->fw_ver[0] == '4') {
1622 adapter->terminfo_valid = true;
1623 adapter->low_term = autoscsi.low_term;
1624 adapter->high_term = autoscsi.high_term;
1625 }
1626 /*
1627 Save the Wide Permitted, Fast Permitted, Synchronous
1628 Permitted, Disconnect Permitted, Ultra Permitted, and
1629 SCAM Information in the Host Adapter structure.
1630 */
1631 adapter->wide_ok = autoscsi.wide_ok;
1632 adapter->fast_ok = autoscsi.fast_ok;
1633 adapter->sync_ok = autoscsi.sync_ok;
1634 adapter->discon_ok = autoscsi.discon_ok;
1635 if (adapter->ultra)
1636 adapter->ultra_ok = autoscsi.ultra_ok;
1637 if (adapter->scam) {
1638 adapter->scam_enabled = autoscsi.scam_enabled;
1639 adapter->scam_lev2 = autoscsi.scam_lev2;
1640 }
1641 }
1642 /*
1643 Initialize fields in the Host Adapter structure for "S" and "A"
1644 series MultiMaster Host Adapters.
1645 */
1646 if (adapter->fw_ver[0] < '4') {
1647 if (setupinfo.sync) {
1648 adapter->sync_ok = 0xFF;
1649 if (adapter->adapter_bus_type == BLOGIC_EISA_BUS) {
1650 if (ext_setupinfo.misc.fast_on_eisa)
1651 adapter->fast_ok = 0xFF;
1652 if (strcmp(adapter->model, "BT-757") == 0)
1653 adapter->wide_ok = 0xFF;
1654 }
1655 }
1656 adapter->discon_ok = 0xFF;
1657 adapter->parity = setupinfo.parity;
1658 adapter->reset_enabled = true;
1659 }
1660 /*
1661 Determine the maximum number of Target IDs and Logical Units
1662 supported by this driver for Wide and Narrow Host Adapters.
1663 */
1664 adapter->maxdev = (adapter->wide ? 16 : 8);
1665 adapter->maxlun = (adapter->ext_lun ? 32 : 8);
1666 /*
1667 Select appropriate values for the Mailbox Count, Driver Queue Depth,
1668 Initial CCBs, and Incremental CCBs variables based on whether
1669 or not Strict Round Robin Mode is supported. If Strict Round
1670 Robin Mode is supported, then there is no performance degradation
1671 in using the maximum possible number of Outgoing and Incoming
1672 Mailboxes and allowing the Tagged and Untagged Queue Depths to
1673 determine the actual utilization. If Strict Round Robin Mode is
1674 not supported, then the Host Adapter must scan all the Outgoing
1675 Mailboxes whenever an Outgoing Mailbox entry is made, which can
1676 cause a substantial performance penalty. The host adapters
1677 actually have room to store the following number of CCBs
1678 internally; that is, they can internally queue and manage this
1679 many active commands on the SCSI bus simultaneously. Performance
1680 measurements demonstrate that the Driver Queue Depth should be
1681 set to the Mailbox Count, rather than the Host Adapter Queue
1682 Depth (internal CCB capacity), as it is more efficient to have the
1683 queued commands waiting in Outgoing Mailboxes if necessary than
1684 to block the process in the higher levels of the SCSI Subsystem.
1685
1686 192 BT-948/958/958D
1687 100 BT-946C/956C/956CD/747C/757C/757CD/445C
1688 50 BT-545C/540CF
1689 30 BT-747S/747D/757S/757D/445S/545S/542D/542B/742A
1690 */
1691 if (adapter->fw_ver[0] == '5')
1692 adapter->adapter_qdepth = 192;
1693 else if (adapter->fw_ver[0] == '4')
1694 adapter->adapter_qdepth = (adapter->adapter_bus_type !=
1695 BLOGIC_ISA_BUS ? 100 : 50);
1696 else
1697 adapter->adapter_qdepth = 30;
1698 if (strcmp(adapter->fw_ver, "3.31") >= 0) {
1699 adapter->strict_rr = true;
1700 adapter->mbox_count = BLOGIC_MAX_MAILBOX;
1701 } else {
1702 adapter->strict_rr = false;
1703 adapter->mbox_count = 32;
1704 }
1705 adapter->drvr_qdepth = adapter->mbox_count;
1706 adapter->initccbs = 4 * BLOGIC_CCB_GRP_ALLOCSIZE;
1707 adapter->inc_ccbs = BLOGIC_CCB_GRP_ALLOCSIZE;
1708 /*
1709 Tagged Queuing support is available and operates properly on
1710 all "W" series MultiMaster Host Adapters, on "C" series
1711 MultiMaster Host Adapters with firmware version 4.22 and above,
1712 and on "S" series MultiMaster Host Adapters with firmware version
1713 3.35 and above.
1714 */
1715 adapter->tagq_ok = 0;
1716 switch (adapter->fw_ver[0]) {
1717 case '5':
1718 adapter->tagq_ok = 0xFFFF;
1719 break;
1720 case '4':
1721 if (strcmp(adapter->fw_ver, "4.22") >= 0)
1722 adapter->tagq_ok = 0xFFFF;
1723 break;
1724 case '3':
1725 if (strcmp(adapter->fw_ver, "3.35") >= 0)
1726 adapter->tagq_ok = 0xFFFF;
1727 break;
1728 }
1729 /*
1730 Determine the Host Adapter BIOS Address if the BIOS is enabled and
1731 save it in the Host Adapter structure. The BIOS is disabled if the
1732 bios_addr is 0.
1733 */
1734 adapter->bios_addr = ext_setupinfo.bios_addr << 12;
1735 /*
1736 ISA Host Adapters require Bounce Buffers if there is more than
1737 16MB memory.
1738 */
1739 if (adapter->adapter_bus_type == BLOGIC_ISA_BUS &&
1740 (void *) high_memory > (void *) MAX_DMA_ADDRESS)
1741 adapter->need_bouncebuf = true;
1742 /*
1743 BusLogic BT-445S Host Adapters prior to board revision E have a
1744 hardware bug whereby when the BIOS is enabled, transfers to/from
1745 the same address range the BIOS occupies modulo 16MB are handled
1746 incorrectly. Only properly functioning BT-445S Host Adapters
1747 have firmware version 3.37, so require that ISA Bounce Buffers
1748 be used for the buggy BT-445S models if there is more than 16MB
1749 memory.
1750 */
1751 if (adapter->bios_addr > 0 && strcmp(adapter->model, "BT-445S") == 0 &&
1752 strcmp(adapter->fw_ver, "3.37") < 0 &&
1753 (void *) high_memory > (void *) MAX_DMA_ADDRESS)
1754 adapter->need_bouncebuf = true;
1755 /*
1756 Initialize parameters common to MultiMaster and FlashPoint
1757 Host Adapters.
1758 */
1759common:
1760 /*
1761 Initialize the Host Adapter Full Model Name from the Model Name.
1762 */
1763 strcpy(adapter->full_model, "BusLogic ");
1764 strcat(adapter->full_model, adapter->model);
1765 /*
1766 Select an appropriate value for the Tagged Queue Depth either from a
1767 BusLogic Driver Options specification, or based on whether this Host
1768 Adapter requires that ISA Bounce Buffers be used. The Tagged Queue
1769 Depth is left at 0 for automatic determination in
1770 BusLogic_SelectQueueDepths. Initialize the Untagged Queue Depth.
1771 */
1772 for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) {
1773 unsigned char qdepth = 0;
1774 if (adapter->drvr_opts != NULL &&
1775 adapter->drvr_opts->qdepth[tgt_id] > 0)
1776 qdepth = adapter->drvr_opts->qdepth[tgt_id];
1777 else if (adapter->need_bouncebuf)
1778 qdepth = BLOGIC_TAG_DEPTH_BB;
1779 adapter->qdepth[tgt_id] = qdepth;
1780 }
1781 if (adapter->need_bouncebuf)
1782 adapter->untag_qdepth = BLOGIC_UNTAG_DEPTH_BB;
1783 else
1784 adapter->untag_qdepth = BLOGIC_UNTAG_DEPTH;
1785 if (adapter->drvr_opts != NULL)
1786 adapter->common_qdepth = adapter->drvr_opts->common_qdepth;
1787 if (adapter->common_qdepth > 0 &&
1788 adapter->common_qdepth < adapter->untag_qdepth)
1789 adapter->untag_qdepth = adapter->common_qdepth;
1790 /*
1791 Tagged Queuing is only allowed if Disconnect/Reconnect is permitted.
1792 Therefore, mask the Tagged Queuing Permitted Default bits with the
1793 Disconnect/Reconnect Permitted bits.
1794 */
1795 adapter->tagq_ok &= adapter->discon_ok;
1796 /*
1797 Combine the default Tagged Queuing Permitted bits with any
1798 BusLogic Driver Options Tagged Queuing specification.
1799 */
1800 if (adapter->drvr_opts != NULL)
1801 adapter->tagq_ok = (adapter->drvr_opts->tagq_ok &
1802 adapter->drvr_opts->tagq_ok_mask) |
1803 (adapter->tagq_ok & ~adapter->drvr_opts->tagq_ok_mask);
1804
1805 /*
1806 Select an appropriate value for Bus Settle Time either from a
1807 BusLogic Driver Options specification, or from
1808 BLOGIC_BUS_SETTLE_TIME.
1809 */
1810 if (adapter->drvr_opts != NULL &&
1811 adapter->drvr_opts->bus_settle_time > 0)
1812 adapter->bus_settle_time = adapter->drvr_opts->bus_settle_time;
1813 else
1814 adapter->bus_settle_time = BLOGIC_BUS_SETTLE_TIME;
1815 /*
1816 Indicate reading the Host Adapter Configuration completed
1817 successfully.
1818 */
1819 return true;
1820}
1821
1822
1823/*
1824 blogic_reportconfig reports the configuration of Host Adapter.
1825*/
1826
1827static bool __init blogic_reportconfig(struct blogic_adapter *adapter)
1828{
1829 unsigned short alltgt_mask = (1 << adapter->maxdev) - 1;
1830 unsigned short sync_ok, fast_ok;
1831 unsigned short ultra_ok, wide_ok;
1832 unsigned short discon_ok, tagq_ok;
1833 bool common_syncneg, common_tagq_depth;
1834 char syncstr[BLOGIC_MAXDEV + 1];
1835 char widestr[BLOGIC_MAXDEV + 1];
1836 char discon_str[BLOGIC_MAXDEV + 1];
1837 char tagq_str[BLOGIC_MAXDEV + 1];
1838 char *syncmsg = syncstr;
1839 char *widemsg = widestr;
1840 char *discon_msg = discon_str;
1841 char *tagq_msg = tagq_str;
1842 int tgt_id;
1843
1844 blogic_info("Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n", adapter, adapter->model, blogic_adapter_busnames[adapter->adapter_bus_type], (adapter->wide ? " Wide" : ""), (adapter->differential ? " Differential" : ""), (adapter->ultra ? " Ultra" : ""));
1845 blogic_info(" Firmware Version: %s, I/O Address: 0x%X, " "IRQ Channel: %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch, (adapter->level_int ? "Level" : "Edge"));
1846 if (adapter->adapter_bus_type != BLOGIC_PCI_BUS) {
1847 blogic_info(" DMA Channel: ", adapter);
1848 if (adapter->dma_ch > 0)
1849 blogic_info("%d, ", adapter, adapter->dma_ch);
1850 else
1851 blogic_info("None, ", adapter);
1852 if (adapter->bios_addr > 0)
1853 blogic_info("BIOS Address: 0x%X, ", adapter,
1854 adapter->bios_addr);
1855 else
1856 blogic_info("BIOS Address: None, ", adapter);
1857 } else {
1858 blogic_info(" PCI Bus: %d, Device: %d, Address: ", adapter,
1859 adapter->bus, adapter->dev);
1860 if (adapter->pci_addr > 0)
1861 blogic_info("0x%X, ", adapter, adapter->pci_addr);
1862 else
1863 blogic_info("Unassigned, ", adapter);
1864 }
1865 blogic_info("Host Adapter SCSI ID: %d\n", adapter, adapter->scsi_id);
1866 blogic_info(" Parity Checking: %s, Extended Translation: %s\n",
1867 adapter, (adapter->parity ? "Enabled" : "Disabled"),
1868 (adapter->ext_trans_enable ? "Enabled" : "Disabled"));
1869 alltgt_mask &= ~(1 << adapter->scsi_id);
1870 sync_ok = adapter->sync_ok & alltgt_mask;
1871 fast_ok = adapter->fast_ok & alltgt_mask;
1872 ultra_ok = adapter->ultra_ok & alltgt_mask;
1873 if ((blogic_multimaster_type(adapter) &&
1874 (adapter->fw_ver[0] >= '4' ||
1875 adapter->adapter_bus_type == BLOGIC_EISA_BUS)) ||
1876 blogic_flashpoint_type(adapter)) {
1877 common_syncneg = false;
1878 if (sync_ok == 0) {
1879 syncmsg = "Disabled";
1880 common_syncneg = true;
1881 } else if (sync_ok == alltgt_mask) {
1882 if (fast_ok == 0) {
1883 syncmsg = "Slow";
1884 common_syncneg = true;
1885 } else if (fast_ok == alltgt_mask) {
1886 if (ultra_ok == 0) {
1887 syncmsg = "Fast";
1888 common_syncneg = true;
1889 } else if (ultra_ok == alltgt_mask) {
1890 syncmsg = "Ultra";
1891 common_syncneg = true;
1892 }
1893 }
1894 }
1895 if (!common_syncneg) {
1896 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
1897 syncstr[tgt_id] = ((!(sync_ok & (1 << tgt_id))) ? 'N' : (!(fast_ok & (1 << tgt_id)) ? 'S' : (!(ultra_ok & (1 << tgt_id)) ? 'F' : 'U')));
1898 syncstr[adapter->scsi_id] = '#';
1899 syncstr[adapter->maxdev] = '\0';
1900 }
1901 } else
1902 syncmsg = (sync_ok == 0 ? "Disabled" : "Enabled");
1903 wide_ok = adapter->wide_ok & alltgt_mask;
1904 if (wide_ok == 0)
1905 widemsg = "Disabled";
1906 else if (wide_ok == alltgt_mask)
1907 widemsg = "Enabled";
1908 else {
1909 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
1910 widestr[tgt_id] = ((wide_ok & (1 << tgt_id)) ? 'Y' : 'N');
1911 widestr[adapter->scsi_id] = '#';
1912 widestr[adapter->maxdev] = '\0';
1913 }
1914 discon_ok = adapter->discon_ok & alltgt_mask;
1915 if (discon_ok == 0)
1916 discon_msg = "Disabled";
1917 else if (discon_ok == alltgt_mask)
1918 discon_msg = "Enabled";
1919 else {
1920 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
1921 discon_str[tgt_id] = ((discon_ok & (1 << tgt_id)) ? 'Y' : 'N');
1922 discon_str[adapter->scsi_id] = '#';
1923 discon_str[adapter->maxdev] = '\0';
1924 }
1925 tagq_ok = adapter->tagq_ok & alltgt_mask;
1926 if (tagq_ok == 0)
1927 tagq_msg = "Disabled";
1928 else if (tagq_ok == alltgt_mask)
1929 tagq_msg = "Enabled";
1930 else {
1931 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
1932 tagq_str[tgt_id] = ((tagq_ok & (1 << tgt_id)) ? 'Y' : 'N');
1933 tagq_str[adapter->scsi_id] = '#';
1934 tagq_str[adapter->maxdev] = '\0';
1935 }
1936 blogic_info(" Synchronous Negotiation: %s, Wide Negotiation: %s\n",
1937 adapter, syncmsg, widemsg);
1938 blogic_info(" Disconnect/Reconnect: %s, Tagged Queuing: %s\n", adapter,
1939 discon_msg, tagq_msg);
1940 if (blogic_multimaster_type(adapter)) {
1941 blogic_info(" Scatter/Gather Limit: %d of %d segments, " "Mailboxes: %d\n", adapter, adapter->drvr_sglimit, adapter->adapter_sglimit, adapter->mbox_count);
1942 blogic_info(" Driver Queue Depth: %d, " "Host Adapter Queue Depth: %d\n", adapter, adapter->drvr_qdepth, adapter->adapter_qdepth);
1943 } else
1944 blogic_info(" Driver Queue Depth: %d, " "Scatter/Gather Limit: %d segments\n", adapter, adapter->drvr_qdepth, adapter->drvr_sglimit);
1945 blogic_info(" Tagged Queue Depth: ", adapter);
1946 common_tagq_depth = true;
1947 for (tgt_id = 1; tgt_id < adapter->maxdev; tgt_id++)
1948 if (adapter->qdepth[tgt_id] != adapter->qdepth[0]) {
1949 common_tagq_depth = false;
1950 break;
1951 }
1952 if (common_tagq_depth) {
1953 if (adapter->qdepth[0] > 0)
1954 blogic_info("%d", adapter, adapter->qdepth[0]);
1955 else
1956 blogic_info("Automatic", adapter);
1957 } else
1958 blogic_info("Individual", adapter);
1959 blogic_info(", Untagged Queue Depth: %d\n", adapter,
1960 adapter->untag_qdepth);
1961 if (adapter->terminfo_valid) {
1962 if (adapter->wide)
1963 blogic_info(" SCSI Bus Termination: %s", adapter,
1964 (adapter->low_term ? (adapter->high_term ? "Both Enabled" : "Low Enabled") : (adapter->high_term ? "High Enabled" : "Both Disabled")));
1965 else
1966 blogic_info(" SCSI Bus Termination: %s", adapter,
1967 (adapter->low_term ? "Enabled" : "Disabled"));
1968 if (adapter->scam)
1969 blogic_info(", SCAM: %s", adapter,
1970 (adapter->scam_enabled ? (adapter->scam_lev2 ? "Enabled, Level 2" : "Enabled, Level 1") : "Disabled"));
1971 blogic_info("\n", adapter);
1972 }
1973 /*
1974 Indicate reporting the Host Adapter configuration completed
1975 successfully.
1976 */
1977 return true;
1978}
1979
1980
1981/*
1982 blogic_getres acquires the system resources necessary to use
1983 Host Adapter.
1984*/
1985
1986static bool __init blogic_getres(struct blogic_adapter *adapter)
1987{
1988 if (adapter->irq_ch == 0) {
1989 blogic_err("NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n",
1990 adapter);
1991 return false;
1992 }
1993 /*
1994 Acquire shared access to the IRQ Channel.
1995 */
1996 if (request_irq(adapter->irq_ch, blogic_inthandler, IRQF_SHARED,
1997 adapter->full_model, adapter) < 0) {
1998 blogic_err("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n",
1999 adapter, adapter->irq_ch);
2000 return false;
2001 }
2002 adapter->irq_acquired = true;
2003 /*
2004 Acquire exclusive access to the DMA Channel.
2005 */
2006 if (adapter->dma_ch > 0) {
2007 if (request_dma(adapter->dma_ch, adapter->full_model) < 0) {
2008 blogic_err("UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n", adapter, adapter->dma_ch);
2009 return false;
2010 }
2011 set_dma_mode(adapter->dma_ch, DMA_MODE_CASCADE);
2012 enable_dma(adapter->dma_ch);
2013 adapter->dma_chan_acquired = true;
2014 }
2015 /*
2016 Indicate the System Resource Acquisition completed successfully,
2017 */
2018 return true;
2019}
2020
2021
2022/*
2023 blogic_relres releases any system resources previously acquired
2024 by blogic_getres.
2025*/
2026
2027static void blogic_relres(struct blogic_adapter *adapter)
2028{
2029 /*
2030 Release shared access to the IRQ Channel.
2031 */
2032 if (adapter->irq_acquired)
2033 free_irq(adapter->irq_ch, adapter);
2034 /*
2035 Release exclusive access to the DMA Channel.
2036 */
2037 if (adapter->dma_chan_acquired)
2038 free_dma(adapter->dma_ch);
2039 /*
2040 Release any allocated memory structs not released elsewhere
2041 */
2042 if (adapter->mbox_space)
2043 pci_free_consistent(adapter->pci_device, adapter->mbox_sz,
2044 adapter->mbox_space, adapter->mbox_space_handle);
2045 pci_dev_put(adapter->pci_device);
2046 adapter->mbox_space = NULL;
2047 adapter->mbox_space_handle = 0;
2048 adapter->mbox_sz = 0;
2049}
2050
2051
2052/*
2053 blogic_initadapter initializes Host Adapter. This is the only
2054 function called during SCSI Host Adapter detection which modifies the state
2055 of the Host Adapter from its initial power on or hard reset state.
2056*/
2057
2058static bool blogic_initadapter(struct blogic_adapter *adapter)
2059{
2060 struct blogic_extmbox_req extmbox_req;
2061 enum blogic_rr_req rr_req;
2062 enum blogic_setccb_fmt setccb_fmt;
2063 int tgt_id;
2064
2065 /*
2066 Initialize the pointers to the first and last CCBs that are
2067 queued for completion processing.
2068 */
2069 adapter->firstccb = NULL;
2070 adapter->lastccb = NULL;
2071
2072 /*
2073 Initialize the Bus Device Reset Pending CCB, Tagged Queuing Active,
2074 Command Successful Flag, Active Commands, and Commands Since Reset
2075 for each Target Device.
2076 */
2077 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) {
2078 adapter->bdr_pend[tgt_id] = NULL;
2079 adapter->tgt_flags[tgt_id].tagq_active = false;
2080 adapter->tgt_flags[tgt_id].cmd_good = false;
2081 adapter->active_cmds[tgt_id] = 0;
2082 adapter->cmds_since_rst[tgt_id] = 0;
2083 }
2084
2085 /*
2086 FlashPoint Host Adapters do not use Outgoing and Incoming Mailboxes.
2087 */
2088 if (blogic_flashpoint_type(adapter))
2089 goto done;
2090
2091 /*
2092 Initialize the Outgoing and Incoming Mailbox pointers.
2093 */
2094 adapter->mbox_sz = adapter->mbox_count * (sizeof(struct blogic_outbox) + sizeof(struct blogic_inbox));
2095 adapter->mbox_space = pci_alloc_consistent(adapter->pci_device,
2096 adapter->mbox_sz, &adapter->mbox_space_handle);
2097 if (adapter->mbox_space == NULL)
2098 return blogic_failure(adapter, "MAILBOX ALLOCATION");
2099 adapter->first_outbox = (struct blogic_outbox *) adapter->mbox_space;
2100 adapter->last_outbox = adapter->first_outbox + adapter->mbox_count - 1;
2101 adapter->next_outbox = adapter->first_outbox;
2102 adapter->first_inbox = (struct blogic_inbox *) (adapter->last_outbox + 1);
2103 adapter->last_inbox = adapter->first_inbox + adapter->mbox_count - 1;
2104 adapter->next_inbox = adapter->first_inbox;
2105
2106 /*
2107 Initialize the Outgoing and Incoming Mailbox structures.
2108 */
2109 memset(adapter->first_outbox, 0,
2110 adapter->mbox_count * sizeof(struct blogic_outbox));
2111 memset(adapter->first_inbox, 0,
2112 adapter->mbox_count * sizeof(struct blogic_inbox));
2113
2114 /*
2115 Initialize the Host Adapter's Pointer to the Outgoing/Incoming
2116 Mailboxes.
2117 */
2118 extmbox_req.mbox_count = adapter->mbox_count;
2119 extmbox_req.base_mbox_addr = (u32) adapter->mbox_space_handle;
2120 if (blogic_cmd(adapter, BLOGIC_INIT_EXT_MBOX, &extmbox_req,
2121 sizeof(extmbox_req), NULL, 0) < 0)
2122 return blogic_failure(adapter, "MAILBOX INITIALIZATION");
2123 /*
2124 Enable Strict Round Robin Mode if supported by the Host Adapter. In
2125 Strict Round Robin Mode, the Host Adapter only looks at the next
2126 Outgoing Mailbox for each new command, rather than scanning
2127 through all the Outgoing Mailboxes to find any that have new
2128 commands in them. Strict Round Robin Mode is significantly more
2129 efficient.
2130 */
2131 if (adapter->strict_rr) {
2132 rr_req = BLOGIC_STRICT_RR_MODE;
2133 if (blogic_cmd(adapter, BLOGIC_STRICT_RR, &rr_req,
2134 sizeof(rr_req), NULL, 0) < 0)
2135 return blogic_failure(adapter,
2136 "ENABLE STRICT ROUND ROBIN MODE");
2137 }
2138
2139 /*
2140 For Host Adapters that support Extended LUN Format CCBs, issue the
2141 Set CCB Format command to allow 32 Logical Units per Target Device.
2142 */
2143 if (adapter->ext_lun) {
2144 setccb_fmt = BLOGIC_EXT_LUN_CCB;
2145 if (blogic_cmd(adapter, BLOGIC_SETCCB_FMT, &setccb_fmt,
2146 sizeof(setccb_fmt), NULL, 0) < 0)
2147 return blogic_failure(adapter, "SET CCB FORMAT");
2148 }
2149
2150 /*
2151 Announce Successful Initialization.
2152 */
2153done:
2154 if (!adapter->adapter_initd) {
2155 blogic_info("*** %s Initialized Successfully ***\n", adapter,
2156 adapter->full_model);
2157 blogic_info("\n", adapter);
2158 } else
2159 blogic_warn("*** %s Initialized Successfully ***\n", adapter,
2160 adapter->full_model);
2161 adapter->adapter_initd = true;
2162
2163 /*
2164 Indicate the Host Adapter Initialization completed successfully.
2165 */
2166 return true;
2167}
2168
2169
2170/*
2171 blogic_inquiry inquires about the Target Devices accessible
2172 through Host Adapter.
2173*/
2174
2175static bool __init blogic_inquiry(struct blogic_adapter *adapter)
2176{
2177 u16 installed_devs;
2178 u8 installed_devs0to7[8];
2179 struct blogic_setup_info setupinfo;
2180 u8 sync_period[BLOGIC_MAXDEV];
2181 unsigned char req_replylen;
2182 int tgt_id;
2183
2184 /*
2185 Wait a few seconds between the Host Adapter Hard Reset which
2186 initiates a SCSI Bus Reset and issuing any SCSI Commands. Some
2187 SCSI devices get confused if they receive SCSI Commands too soon
2188 after a SCSI Bus Reset.
2189 */
2190 blogic_delay(adapter->bus_settle_time);
2191 /*
2192 FlashPoint Host Adapters do not provide for Target Device Inquiry.
2193 */
2194 if (blogic_flashpoint_type(adapter))
2195 return true;
2196 /*
2197 Inhibit the Target Device Inquiry if requested.
2198 */
2199 if (adapter->drvr_opts != NULL && adapter->drvr_opts->stop_tgt_inquiry)
2200 return true;
2201 /*
2202 Issue the Inquire Target Devices command for host adapters with
2203 firmware version 4.25 or later, or the Inquire Installed Devices
2204 ID 0 to 7 command for older host adapters. This is necessary to
2205 force Synchronous Transfer Negotiation so that the Inquire Setup
2206 Information and Inquire Synchronous Period commands will return
2207 valid data. The Inquire Target Devices command is preferable to
2208 Inquire Installed Devices ID 0 to 7 since it only probes Logical
2209 Unit 0 of each Target Device.
2210 */
2211 if (strcmp(adapter->fw_ver, "4.25") >= 0) {
2212
2213 /*
2214 Issue a Inquire Target Devices command. Inquire Target
2215 Devices only tests Logical Unit 0 of each Target Device
2216 unlike the Inquire Installed Devices commands which test
2217 Logical Units 0 - 7. Two bytes are returned, where byte
2218 0 bit 0 set indicates that Target Device 0 exists, and so on.
2219 */
2220
2221 if (blogic_cmd(adapter, BLOGIC_INQ_DEV, NULL, 0,
2222 &installed_devs, sizeof(installed_devs))
2223 != sizeof(installed_devs))
2224 return blogic_failure(adapter, "INQUIRE TARGET DEVICES");
2225 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2226 adapter->tgt_flags[tgt_id].tgt_exists =
2227 (installed_devs & (1 << tgt_id) ? true : false);
2228 } else {
2229
2230 /*
2231 Issue an Inquire Installed Devices command. For each
2232 Target Device, a byte is returned where bit 0 set
2233 indicates that Logical Unit 0 * exists, bit 1 set
2234 indicates that Logical Unit 1 exists, and so on.
2235 */
2236
2237 if (blogic_cmd(adapter, BLOGIC_INQ_DEV0TO7, NULL, 0,
2238 &installed_devs0to7, sizeof(installed_devs0to7))
2239 != sizeof(installed_devs0to7))
2240 return blogic_failure(adapter,
2241 "INQUIRE INSTALLED DEVICES ID 0 TO 7");
2242 for (tgt_id = 0; tgt_id < 8; tgt_id++)
2243 adapter->tgt_flags[tgt_id].tgt_exists =
2244 (installed_devs0to7[tgt_id] != 0 ? true : false);
2245 }
2246 /*
2247 Issue the Inquire Setup Information command.
2248 */
2249 req_replylen = sizeof(setupinfo);
2250 if (blogic_cmd(adapter, BLOGIC_INQ_SETUPINFO, &req_replylen,
2251 sizeof(req_replylen), &setupinfo, sizeof(setupinfo))
2252 != sizeof(setupinfo))
2253 return blogic_failure(adapter, "INQUIRE SETUP INFORMATION");
2254 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2255 adapter->sync_offset[tgt_id] = (tgt_id < 8 ? setupinfo.sync0to7[tgt_id].offset : setupinfo.sync8to15[tgt_id - 8].offset);
2256 if (strcmp(adapter->fw_ver, "5.06L") >= 0)
2257 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2258 adapter->tgt_flags[tgt_id].wide_active = (tgt_id < 8 ? (setupinfo.wide_tx_active0to7 & (1 << tgt_id) ? true : false) : (setupinfo.wide_tx_active8to15 & (1 << (tgt_id - 8)) ? true : false));
2259 /*
2260 Issue the Inquire Synchronous Period command.
2261 */
2262 if (adapter->fw_ver[0] >= '3') {
2263
2264 /* Issue a Inquire Synchronous Period command. For each
2265 Target Device, a byte is returned which represents the
2266 Synchronous Transfer Period in units of 10 nanoseconds.
2267 */
2268
2269 req_replylen = sizeof(sync_period);
2270 if (blogic_cmd(adapter, BLOGIC_INQ_SYNC_PERIOD, &req_replylen,
2271 sizeof(req_replylen), &sync_period,
2272 sizeof(sync_period)) != sizeof(sync_period))
2273 return blogic_failure(adapter,
2274 "INQUIRE SYNCHRONOUS PERIOD");
2275 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2276 adapter->sync_period[tgt_id] = sync_period[tgt_id];
2277 } else
2278 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2279 if (setupinfo.sync0to7[tgt_id].offset > 0)
2280 adapter->sync_period[tgt_id] = 20 + 5 * setupinfo.sync0to7[tgt_id].tx_period;
2281 /*
2282 Indicate the Target Device Inquiry completed successfully.
2283 */
2284 return true;
2285}
2286
2287/*
2288 blogic_inithoststruct initializes the fields in the SCSI Host
2289 structure. The base, io_port, n_io_ports, irq, and dma_channel fields in the
2290 SCSI Host structure are intentionally left uninitialized, as this driver
2291 handles acquisition and release of these resources explicitly, as well as
2292 ensuring exclusive access to the Host Adapter hardware and data structures
2293 through explicit acquisition and release of the Host Adapter's Lock.
2294*/
2295
2296static void __init blogic_inithoststruct(struct blogic_adapter *adapter,
2297 struct Scsi_Host *host)
2298{
2299 host->max_id = adapter->maxdev;
2300 host->max_lun = adapter->maxlun;
2301 host->max_channel = 0;
2302 host->unique_id = adapter->io_addr;
2303 host->this_id = adapter->scsi_id;
2304 host->can_queue = adapter->drvr_qdepth;
2305 host->sg_tablesize = adapter->drvr_sglimit;
2306 host->unchecked_isa_dma = adapter->need_bouncebuf;
2307 host->cmd_per_lun = adapter->untag_qdepth;
2308}
2309
2310/*
2311 blogic_slaveconfig will actually set the queue depth on individual
2312 scsi devices as they are permanently added to the device chain. We
2313 shamelessly rip off the SelectQueueDepths code to make this work mostly
2314 like it used to. Since we don't get called once at the end of the scan
2315 but instead get called for each device, we have to do things a bit
2316 differently.
2317*/
2318static int blogic_slaveconfig(struct scsi_device *dev)
2319{
2320 struct blogic_adapter *adapter =
2321 (struct blogic_adapter *) dev->host->hostdata;
2322 int tgt_id = dev->id;
2323 int qdepth = adapter->qdepth[tgt_id];
2324
2325 if (adapter->tgt_flags[tgt_id].tagq_ok &&
2326 (adapter->tagq_ok & (1 << tgt_id))) {
2327 if (qdepth == 0)
2328 qdepth = BLOGIC_MAX_AUTO_TAG_DEPTH;
2329 adapter->qdepth[tgt_id] = qdepth;
2330 scsi_change_queue_depth(dev, qdepth);
2331 } else {
2332 adapter->tagq_ok &= ~(1 << tgt_id);
2333 qdepth = adapter->untag_qdepth;
2334 adapter->qdepth[tgt_id] = qdepth;
2335 scsi_change_queue_depth(dev, qdepth);
2336 }
2337 qdepth = 0;
2338 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2339 if (adapter->tgt_flags[tgt_id].tgt_exists)
2340 qdepth += adapter->qdepth[tgt_id];
2341 if (qdepth > adapter->alloc_ccbs)
2342 blogic_create_addlccbs(adapter, qdepth - adapter->alloc_ccbs,
2343 false);
2344 return 0;
2345}
2346
2347/*
2348 blogic_init probes for BusLogic Host Adapters at the standard
2349 I/O Addresses where they may be located, initializing, registering, and
2350 reporting the configuration of each BusLogic Host Adapter it finds. It
2351 returns the number of BusLogic Host Adapters successfully initialized and
2352 registered.
2353*/
2354
2355static int __init blogic_init(void)
2356{
2357 int adapter_count = 0, drvr_optindex = 0, probeindex;
2358 struct blogic_adapter *adapter;
2359 int ret = 0;
2360
2361#ifdef MODULE
2362 if (BusLogic)
2363 blogic_setup(BusLogic);
2364#endif
2365
2366 if (blogic_probe_options.noprobe)
2367 return -ENODEV;
2368 blogic_probeinfo_list =
2369 kzalloc(BLOGIC_MAX_ADAPTERS * sizeof(struct blogic_probeinfo),
2370 GFP_KERNEL);
2371 if (blogic_probeinfo_list == NULL) {
2372 blogic_err("BusLogic: Unable to allocate Probe Info List\n",
2373 NULL);
2374 return -ENOMEM;
2375 }
2376
2377 adapter = kzalloc(sizeof(struct blogic_adapter), GFP_KERNEL);
2378 if (adapter == NULL) {
2379 kfree(blogic_probeinfo_list);
2380 blogic_err("BusLogic: Unable to allocate Prototype Host Adapter\n", NULL);
2381 return -ENOMEM;
2382 }
2383
2384#ifdef MODULE
2385 if (BusLogic != NULL)
2386 blogic_setup(BusLogic);
2387#endif
2388 blogic_init_probeinfo_list(adapter);
2389 for (probeindex = 0; probeindex < blogic_probeinfo_count; probeindex++) {
2390 struct blogic_probeinfo *probeinfo =
2391 &blogic_probeinfo_list[probeindex];
2392 struct blogic_adapter *myadapter = adapter;
2393 struct Scsi_Host *host;
2394
2395 if (probeinfo->io_addr == 0)
2396 continue;
2397 memset(myadapter, 0, sizeof(struct blogic_adapter));
2398 myadapter->adapter_type = probeinfo->adapter_type;
2399 myadapter->adapter_bus_type = probeinfo->adapter_bus_type;
2400 myadapter->io_addr = probeinfo->io_addr;
2401 myadapter->pci_addr = probeinfo->pci_addr;
2402 myadapter->bus = probeinfo->bus;
2403 myadapter->dev = probeinfo->dev;
2404 myadapter->pci_device = probeinfo->pci_device;
2405 myadapter->irq_ch = probeinfo->irq_ch;
2406 myadapter->addr_count =
2407 blogic_adapter_addr_count[myadapter->adapter_type];
2408
2409 /*
2410 Make sure region is free prior to probing.
2411 */
2412 if (!request_region(myadapter->io_addr, myadapter->addr_count,
2413 "BusLogic"))
2414 continue;
2415 /*
2416 Probe the Host Adapter. If unsuccessful, abort further
2417 initialization.
2418 */
2419 if (!blogic_probe(myadapter)) {
2420 release_region(myadapter->io_addr,
2421 myadapter->addr_count);
2422 continue;
2423 }
2424 /*
2425 Hard Reset the Host Adapter. If unsuccessful, abort further
2426 initialization.
2427 */
2428 if (!blogic_hwreset(myadapter, true)) {
2429 release_region(myadapter->io_addr,
2430 myadapter->addr_count);
2431 continue;
2432 }
2433 /*
2434 Check the Host Adapter. If unsuccessful, abort further
2435 initialization.
2436 */
2437 if (!blogic_checkadapter(myadapter)) {
2438 release_region(myadapter->io_addr,
2439 myadapter->addr_count);
2440 continue;
2441 }
2442 /*
2443 Initialize the Driver Options field if provided.
2444 */
2445 if (drvr_optindex < blogic_drvr_options_count)
2446 myadapter->drvr_opts =
2447 &blogic_drvr_options[drvr_optindex++];
2448 /*
2449 Announce the Driver Version and Date, Author's Name,
2450 Copyright Notice, and Electronic Mail Address.
2451 */
2452 blogic_announce_drvr(myadapter);
2453 /*
2454 Register the SCSI Host structure.
2455 */
2456
2457 host = scsi_host_alloc(&blogic_template,
2458 sizeof(struct blogic_adapter));
2459 if (host == NULL) {
2460 release_region(myadapter->io_addr,
2461 myadapter->addr_count);
2462 continue;
2463 }
2464 myadapter = (struct blogic_adapter *) host->hostdata;
2465 memcpy(myadapter, adapter, sizeof(struct blogic_adapter));
2466 myadapter->scsi_host = host;
2467 myadapter->host_no = host->host_no;
2468 /*
2469 Add Host Adapter to the end of the list of registered
2470 BusLogic Host Adapters.
2471 */
2472 list_add_tail(&myadapter->host_list, &blogic_host_list);
2473
2474 /*
2475 Read the Host Adapter Configuration, Configure the Host
2476 Adapter, Acquire the System Resources necessary to use
2477 the Host Adapter, then Create the Initial CCBs, Initialize
2478 the Host Adapter, and finally perform Target Device
2479 Inquiry. From this point onward, any failure will be
2480 assumed to be due to a problem with the Host Adapter,
2481 rather than due to having mistakenly identified this port
2482 as belonging to a BusLogic Host Adapter. The I/O Address
2483 range will not be released, thereby preventing it from
2484 being incorrectly identified as any other type of Host
2485 Adapter.
2486 */
2487 if (blogic_rdconfig(myadapter) &&
2488 blogic_reportconfig(myadapter) &&
2489 blogic_getres(myadapter) &&
2490 blogic_create_initccbs(myadapter) &&
2491 blogic_initadapter(myadapter) &&
2492 blogic_inquiry(myadapter)) {
2493 /*
2494 Initialization has been completed successfully.
2495 Release and re-register usage of the I/O Address
2496 range so that the Model Name of the Host Adapter
2497 will appear, and initialize the SCSI Host structure.
2498 */
2499 release_region(myadapter->io_addr,
2500 myadapter->addr_count);
2501 if (!request_region(myadapter->io_addr,
2502 myadapter->addr_count,
2503 myadapter->full_model)) {
2504 printk(KERN_WARNING
2505 "BusLogic: Release and re-register of "
2506 "port 0x%04lx failed \n",
2507 (unsigned long)myadapter->io_addr);
2508 blogic_destroy_ccbs(myadapter);
2509 blogic_relres(myadapter);
2510 list_del(&myadapter->host_list);
2511 scsi_host_put(host);
2512 ret = -ENOMEM;
2513 } else {
2514 blogic_inithoststruct(myadapter,
2515 host);
2516 if (scsi_add_host(host, myadapter->pci_device
2517 ? &myadapter->pci_device->dev
2518 : NULL)) {
2519 printk(KERN_WARNING
2520 "BusLogic: scsi_add_host()"
2521 "failed!\n");
2522 blogic_destroy_ccbs(myadapter);
2523 blogic_relres(myadapter);
2524 list_del(&myadapter->host_list);
2525 scsi_host_put(host);
2526 ret = -ENODEV;
2527 } else {
2528 scsi_scan_host(host);
2529 adapter_count++;
2530 }
2531 }
2532 } else {
2533 /*
2534 An error occurred during Host Adapter Configuration
2535 Querying, Host Adapter Configuration, Resource
2536 Acquisition, CCB Creation, Host Adapter
2537 Initialization, or Target Device Inquiry, so
2538 remove Host Adapter from the list of registered
2539 BusLogic Host Adapters, destroy the CCBs, Release
2540 the System Resources, and Unregister the SCSI
2541 Host.
2542 */
2543 blogic_destroy_ccbs(myadapter);
2544 blogic_relres(myadapter);
2545 list_del(&myadapter->host_list);
2546 scsi_host_put(host);
2547 ret = -ENODEV;
2548 }
2549 }
2550 kfree(adapter);
2551 kfree(blogic_probeinfo_list);
2552 blogic_probeinfo_list = NULL;
2553 return ret;
2554}
2555
2556
2557/*
2558 blogic_deladapter releases all resources previously acquired to
2559 support a specific Host Adapter, including the I/O Address range, and
2560 unregisters the BusLogic Host Adapter.
2561*/
2562
2563static int __exit blogic_deladapter(struct blogic_adapter *adapter)
2564{
2565 struct Scsi_Host *host = adapter->scsi_host;
2566
2567 scsi_remove_host(host);
2568
2569 /*
2570 FlashPoint Host Adapters must first be released by the FlashPoint
2571 SCCB Manager.
2572 */
2573 if (blogic_flashpoint_type(adapter))
2574 FlashPoint_ReleaseHostAdapter(adapter->cardhandle);
2575 /*
2576 Destroy the CCBs and release any system resources acquired to
2577 support Host Adapter.
2578 */
2579 blogic_destroy_ccbs(adapter);
2580 blogic_relres(adapter);
2581 /*
2582 Release usage of the I/O Address range.
2583 */
2584 release_region(adapter->io_addr, adapter->addr_count);
2585 /*
2586 Remove Host Adapter from the list of registered BusLogic
2587 Host Adapters.
2588 */
2589 list_del(&adapter->host_list);
2590
2591 scsi_host_put(host);
2592 return 0;
2593}
2594
2595
2596/*
2597 blogic_qcompleted_ccb queues CCB for completion processing.
2598*/
2599
2600static void blogic_qcompleted_ccb(struct blogic_ccb *ccb)
2601{
2602 struct blogic_adapter *adapter = ccb->adapter;
2603
2604 ccb->status = BLOGIC_CCB_COMPLETE;
2605 ccb->next = NULL;
2606 if (adapter->firstccb == NULL) {
2607 adapter->firstccb = ccb;
2608 adapter->lastccb = ccb;
2609 } else {
2610 adapter->lastccb->next = ccb;
2611 adapter->lastccb = ccb;
2612 }
2613 adapter->active_cmds[ccb->tgt_id]--;
2614}
2615
2616
2617/*
2618 blogic_resultcode computes a SCSI Subsystem Result Code from
2619 the Host Adapter Status and Target Device Status.
2620*/
2621
2622static int blogic_resultcode(struct blogic_adapter *adapter,
2623 enum blogic_adapter_status adapter_status,
2624 enum blogic_tgt_status tgt_status)
2625{
2626 int hoststatus;
2627
2628 switch (adapter_status) {
2629 case BLOGIC_CMD_CMPLT_NORMAL:
2630 case BLOGIC_LINK_CMD_CMPLT:
2631 case BLOGIC_LINK_CMD_CMPLT_FLAG:
2632 hoststatus = DID_OK;
2633 break;
2634 case BLOGIC_SELECT_TIMEOUT:
2635 hoststatus = DID_TIME_OUT;
2636 break;
2637 case BLOGIC_INVALID_OUTBOX_CODE:
2638 case BLOGIC_INVALID_CMD_CODE:
2639 case BLOGIC_BAD_CMD_PARAM:
2640 blogic_warn("BusLogic Driver Protocol Error 0x%02X\n",
2641 adapter, adapter_status);
2642 case BLOGIC_DATA_UNDERRUN:
2643 case BLOGIC_DATA_OVERRUN:
2644 case BLOGIC_NOEXPECT_BUSFREE:
2645 case BLOGIC_LINKCCB_BADLUN:
2646 case BLOGIC_AUTOREQSENSE_FAIL:
2647 case BLOGIC_TAGQUEUE_REJECT:
2648 case BLOGIC_BAD_MSG_RCVD:
2649 case BLOGIC_HW_FAIL:
2650 case BLOGIC_BAD_RECONNECT:
2651 case BLOGIC_ABRT_QUEUE:
2652 case BLOGIC_ADAPTER_SW_ERROR:
2653 case BLOGIC_HW_TIMEOUT:
2654 case BLOGIC_PARITY_ERR:
2655 hoststatus = DID_ERROR;
2656 break;
2657 case BLOGIC_INVALID_BUSPHASE:
2658 case BLOGIC_NORESPONSE_TO_ATN:
2659 case BLOGIC_HW_RESET:
2660 case BLOGIC_RST_FROM_OTHERDEV:
2661 case BLOGIC_HW_BDR:
2662 hoststatus = DID_RESET;
2663 break;
2664 default:
2665 blogic_warn("Unknown Host Adapter Status 0x%02X\n", adapter,
2666 adapter_status);
2667 hoststatus = DID_ERROR;
2668 break;
2669 }
2670 return (hoststatus << 16) | tgt_status;
2671}
2672
2673
2674/*
2675 blogic_scan_inbox scans the Incoming Mailboxes saving any
2676 Incoming Mailbox entries for completion processing.
2677*/
2678
2679static void blogic_scan_inbox(struct blogic_adapter *adapter)
2680{
2681 /*
2682 Scan through the Incoming Mailboxes in Strict Round Robin
2683 fashion, saving any completed CCBs for further processing. It
2684 is essential that for each CCB and SCSI Command issued, command
2685 completion processing is performed exactly once. Therefore,
2686 only Incoming Mailboxes with completion code Command Completed
2687 Without Error, Command Completed With Error, or Command Aborted
2688 At Host Request are saved for completion processing. When an
2689 Incoming Mailbox has a completion code of Aborted Command Not
2690 Found, the CCB had already completed or been aborted before the
2691 current Abort request was processed, and so completion processing
2692 has already occurred and no further action should be taken.
2693 */
2694 struct blogic_inbox *next_inbox = adapter->next_inbox;
2695 enum blogic_cmplt_code comp_code;
2696
2697 while ((comp_code = next_inbox->comp_code) != BLOGIC_INBOX_FREE) {
2698 /*
2699 We are only allowed to do this because we limit our
2700 architectures we run on to machines where bus_to_virt(
2701 actually works. There *needs* to be a dma_addr_to_virt()
2702 in the new PCI DMA mapping interface to replace
2703 bus_to_virt() or else this code is going to become very
2704 innefficient.
2705 */
2706 struct blogic_ccb *ccb =
2707 (struct blogic_ccb *) bus_to_virt(next_inbox->ccb);
2708 if (comp_code != BLOGIC_CMD_NOTFOUND) {
2709 if (ccb->status == BLOGIC_CCB_ACTIVE ||
2710 ccb->status == BLOGIC_CCB_RESET) {
2711 /*
2712 Save the Completion Code for this CCB and
2713 queue the CCB for completion processing.
2714 */
2715 ccb->comp_code = comp_code;
2716 blogic_qcompleted_ccb(ccb);
2717 } else {
2718 /*
2719 If a CCB ever appears in an Incoming Mailbox
2720 and is not marked as status Active or Reset,
2721 then there is most likely a bug in
2722 the Host Adapter firmware.
2723 */
2724 blogic_warn("Illegal CCB #%ld status %d in " "Incoming Mailbox\n", adapter, ccb->serial, ccb->status);
2725 }
2726 }
2727 next_inbox->comp_code = BLOGIC_INBOX_FREE;
2728 if (++next_inbox > adapter->last_inbox)
2729 next_inbox = adapter->first_inbox;
2730 }
2731 adapter->next_inbox = next_inbox;
2732}
2733
2734
2735/*
2736 blogic_process_ccbs iterates over the completed CCBs for Host
2737 Adapter setting the SCSI Command Result Codes, deallocating the CCBs, and
2738 calling the SCSI Subsystem Completion Routines. The Host Adapter's Lock
2739 should already have been acquired by the caller.
2740*/
2741
2742static void blogic_process_ccbs(struct blogic_adapter *adapter)
2743{
2744 if (adapter->processing_ccbs)
2745 return;
2746 adapter->processing_ccbs = true;
2747 while (adapter->firstccb != NULL) {
2748 struct blogic_ccb *ccb = adapter->firstccb;
2749 struct scsi_cmnd *command = ccb->command;
2750 adapter->firstccb = ccb->next;
2751 if (adapter->firstccb == NULL)
2752 adapter->lastccb = NULL;
2753 /*
2754 Process the Completed CCB.
2755 */
2756 if (ccb->opcode == BLOGIC_BDR) {
2757 int tgt_id = ccb->tgt_id;
2758
2759 blogic_warn("Bus Device Reset CCB #%ld to Target " "%d Completed\n", adapter, ccb->serial, tgt_id);
2760 blogic_inc_count(&adapter->tgt_stats[tgt_id].bdr_done);
2761 adapter->tgt_flags[tgt_id].tagq_active = false;
2762 adapter->cmds_since_rst[tgt_id] = 0;
2763 adapter->last_resetdone[tgt_id] = jiffies;
2764 /*
2765 Place CCB back on the Host Adapter's free list.
2766 */
2767 blogic_dealloc_ccb(ccb, 1);
2768#if 0 /* this needs to be redone different for new EH */
2769 /*
2770 Bus Device Reset CCBs have the command field
2771 non-NULL only when a Bus Device Reset was requested
2772 for a command that did not have a currently active
2773 CCB in the Host Adapter (i.e., a Synchronous Bus
2774 Device Reset), and hence would not have its
2775 Completion Routine called otherwise.
2776 */
2777 while (command != NULL) {
2778 struct scsi_cmnd *nxt_cmd =
2779 command->reset_chain;
2780 command->reset_chain = NULL;
2781 command->result = DID_RESET << 16;
2782 command->scsi_done(command);
2783 command = nxt_cmd;
2784 }
2785#endif
2786 /*
2787 Iterate over the CCBs for this Host Adapter
2788 performing completion processing for any CCBs
2789 marked as Reset for this Target.
2790 */
2791 for (ccb = adapter->all_ccbs; ccb != NULL;
2792 ccb = ccb->next_all)
2793 if (ccb->status == BLOGIC_CCB_RESET &&
2794 ccb->tgt_id == tgt_id) {
2795 command = ccb->command;
2796 blogic_dealloc_ccb(ccb, 1);
2797 adapter->active_cmds[tgt_id]--;
2798 command->result = DID_RESET << 16;
2799 command->scsi_done(command);
2800 }
2801 adapter->bdr_pend[tgt_id] = NULL;
2802 } else {
2803 /*
2804 Translate the Completion Code, Host Adapter Status,
2805 and Target Device Status into a SCSI Subsystem
2806 Result Code.
2807 */
2808 switch (ccb->comp_code) {
2809 case BLOGIC_INBOX_FREE:
2810 case BLOGIC_CMD_NOTFOUND:
2811 case BLOGIC_INVALID_CCB:
2812 blogic_warn("CCB #%ld to Target %d Impossible State\n", adapter, ccb->serial, ccb->tgt_id);
2813 break;
2814 case BLOGIC_CMD_COMPLETE_GOOD:
2815 adapter->tgt_stats[ccb->tgt_id]
2816 .cmds_complete++;
2817 adapter->tgt_flags[ccb->tgt_id]
2818 .cmd_good = true;
2819 command->result = DID_OK << 16;
2820 break;
2821 case BLOGIC_CMD_ABORT_BY_HOST:
2822 blogic_warn("CCB #%ld to Target %d Aborted\n",
2823 adapter, ccb->serial, ccb->tgt_id);
2824 blogic_inc_count(&adapter->tgt_stats[ccb->tgt_id].aborts_done);
2825 command->result = DID_ABORT << 16;
2826 break;
2827 case BLOGIC_CMD_COMPLETE_ERROR:
2828 command->result = blogic_resultcode(adapter,
2829 ccb->adapter_status, ccb->tgt_status);
2830 if (ccb->adapter_status != BLOGIC_SELECT_TIMEOUT) {
2831 adapter->tgt_stats[ccb->tgt_id]
2832 .cmds_complete++;
2833 if (blogic_global_options.trace_err) {
2834 int i;
2835 blogic_notice("CCB #%ld Target %d: Result %X Host "
2836 "Adapter Status %02X " "Target Status %02X\n", adapter, ccb->serial, ccb->tgt_id, command->result, ccb->adapter_status, ccb->tgt_status);
2837 blogic_notice("CDB ", adapter);
2838 for (i = 0; i < ccb->cdblen; i++)
2839 blogic_notice(" %02X", adapter, ccb->cdb[i]);
2840 blogic_notice("\n", adapter);
2841 blogic_notice("Sense ", adapter);
2842 for (i = 0; i < ccb->sense_datalen; i++)
2843 blogic_notice(" %02X", adapter, command->sense_buffer[i]);
2844 blogic_notice("\n", adapter);
2845 }
2846 }
2847 break;
2848 }
2849 /*
2850 When an INQUIRY command completes normally, save the
2851 CmdQue (Tagged Queuing Supported) and WBus16 (16 Bit
2852 Wide Data Transfers Supported) bits.
2853 */
2854 if (ccb->cdb[0] == INQUIRY && ccb->cdb[1] == 0 &&
2855 ccb->adapter_status == BLOGIC_CMD_CMPLT_NORMAL) {
2856 struct blogic_tgt_flags *tgt_flags =
2857 &adapter->tgt_flags[ccb->tgt_id];
2858 struct scsi_inquiry *inquiry =
2859 (struct scsi_inquiry *) scsi_sglist(command);
2860 tgt_flags->tgt_exists = true;
2861 tgt_flags->tagq_ok = inquiry->CmdQue;
2862 tgt_flags->wide_ok = inquiry->WBus16;
2863 }
2864 /*
2865 Place CCB back on the Host Adapter's free list.
2866 */
2867 blogic_dealloc_ccb(ccb, 1);
2868 /*
2869 Call the SCSI Command Completion Routine.
2870 */
2871 command->scsi_done(command);
2872 }
2873 }
2874 adapter->processing_ccbs = false;
2875}
2876
2877
2878/*
2879 blogic_inthandler handles hardware interrupts from BusLogic Host
2880 Adapters.
2881*/
2882
2883static irqreturn_t blogic_inthandler(int irq_ch, void *devid)
2884{
2885 struct blogic_adapter *adapter = (struct blogic_adapter *) devid;
2886 unsigned long processor_flag;
2887 /*
2888 Acquire exclusive access to Host Adapter.
2889 */
2890 spin_lock_irqsave(adapter->scsi_host->host_lock, processor_flag);
2891 /*
2892 Handle Interrupts appropriately for each Host Adapter type.
2893 */
2894 if (blogic_multimaster_type(adapter)) {
2895 union blogic_int_reg intreg;
2896 /*
2897 Read the Host Adapter Interrupt Register.
2898 */
2899 intreg.all = blogic_rdint(adapter);
2900 if (intreg.ir.int_valid) {
2901 /*
2902 Acknowledge the interrupt and reset the Host Adapter
2903 Interrupt Register.
2904 */
2905 blogic_intreset(adapter);
2906 /*
2907 Process valid External SCSI Bus Reset and Incoming
2908 Mailbox Loaded Interrupts. Command Complete
2909 Interrupts are noted, and Outgoing Mailbox Available
2910 Interrupts are ignored, as they are never enabled.
2911 */
2912 if (intreg.ir.ext_busreset)
2913 adapter->adapter_extreset = true;
2914 else if (intreg.ir.mailin_loaded)
2915 blogic_scan_inbox(adapter);
2916 else if (intreg.ir.cmd_complete)
2917 adapter->adapter_cmd_complete = true;
2918 }
2919 } else {
2920 /*
2921 Check if there is a pending interrupt for this Host Adapter.
2922 */
2923 if (FlashPoint_InterruptPending(adapter->cardhandle))
2924 switch (FlashPoint_HandleInterrupt(adapter->cardhandle)) {
2925 case FPOINT_NORMAL_INT:
2926 break;
2927 case FPOINT_EXT_RESET:
2928 adapter->adapter_extreset = true;
2929 break;
2930 case FPOINT_INTERN_ERR:
2931 blogic_warn("Internal FlashPoint Error detected - Resetting Host Adapter\n", adapter);
2932 adapter->adapter_intern_err = true;
2933 break;
2934 }
2935 }
2936 /*
2937 Process any completed CCBs.
2938 */
2939 if (adapter->firstccb != NULL)
2940 blogic_process_ccbs(adapter);
2941 /*
2942 Reset the Host Adapter if requested.
2943 */
2944 if (adapter->adapter_extreset) {
2945 blogic_warn("Resetting %s due to External SCSI Bus Reset\n", adapter, adapter->full_model);
2946 blogic_inc_count(&adapter->ext_resets);
2947 blogic_resetadapter(adapter, false);
2948 adapter->adapter_extreset = false;
2949 } else if (adapter->adapter_intern_err) {
2950 blogic_warn("Resetting %s due to Host Adapter Internal Error\n", adapter, adapter->full_model);
2951 blogic_inc_count(&adapter->adapter_intern_errors);
2952 blogic_resetadapter(adapter, true);
2953 adapter->adapter_intern_err = false;
2954 }
2955 /*
2956 Release exclusive access to Host Adapter.
2957 */
2958 spin_unlock_irqrestore(adapter->scsi_host->host_lock, processor_flag);
2959 return IRQ_HANDLED;
2960}
2961
2962
2963/*
2964 blogic_write_outbox places CCB and Action Code into an Outgoing
2965 Mailbox for execution by Host Adapter. The Host Adapter's Lock should
2966 already have been acquired by the caller.
2967*/
2968
2969static bool blogic_write_outbox(struct blogic_adapter *adapter,
2970 enum blogic_action action, struct blogic_ccb *ccb)
2971{
2972 struct blogic_outbox *next_outbox;
2973
2974 next_outbox = adapter->next_outbox;
2975 if (next_outbox->action == BLOGIC_OUTBOX_FREE) {
2976 ccb->status = BLOGIC_CCB_ACTIVE;
2977 /*
2978 The CCB field must be written before the Action Code field
2979 since the Host Adapter is operating asynchronously and the
2980 locking code does not protect against simultaneous access
2981 by the Host Adapter.
2982 */
2983 next_outbox->ccb = ccb->dma_handle;
2984 next_outbox->action = action;
2985 blogic_execmbox(adapter);
2986 if (++next_outbox > adapter->last_outbox)
2987 next_outbox = adapter->first_outbox;
2988 adapter->next_outbox = next_outbox;
2989 if (action == BLOGIC_MBOX_START) {
2990 adapter->active_cmds[ccb->tgt_id]++;
2991 if (ccb->opcode != BLOGIC_BDR)
2992 adapter->tgt_stats[ccb->tgt_id].cmds_tried++;
2993 }
2994 return true;
2995 }
2996 return false;
2997}
2998
2999/* Error Handling (EH) support */
3000
3001static int blogic_hostreset(struct scsi_cmnd *SCpnt)
3002{
3003 struct blogic_adapter *adapter =
3004 (struct blogic_adapter *) SCpnt->device->host->hostdata;
3005
3006 unsigned int id = SCpnt->device->id;
3007 struct blogic_tgt_stats *stats = &adapter->tgt_stats[id];
3008 int rc;
3009
3010 spin_lock_irq(SCpnt->device->host->host_lock);
3011
3012 blogic_inc_count(&stats->adapter_reset_req);
3013
3014 rc = blogic_resetadapter(adapter, false);
3015 spin_unlock_irq(SCpnt->device->host->host_lock);
3016 return rc;
3017}
3018
3019/*
3020 blogic_qcmd creates a CCB for Command and places it into an
3021 Outgoing Mailbox for execution by the associated Host Adapter.
3022*/
3023
3024static int blogic_qcmd_lck(struct scsi_cmnd *command,
3025 void (*comp_cb) (struct scsi_cmnd *))
3026{
3027 struct blogic_adapter *adapter =
3028 (struct blogic_adapter *) command->device->host->hostdata;
3029 struct blogic_tgt_flags *tgt_flags =
3030 &adapter->tgt_flags[command->device->id];
3031 struct blogic_tgt_stats *tgt_stats = adapter->tgt_stats;
3032 unsigned char *cdb = command->cmnd;
3033 int cdblen = command->cmd_len;
3034 int tgt_id = command->device->id;
3035 int lun = command->device->lun;
3036 int buflen = scsi_bufflen(command);
3037 int count;
3038 struct blogic_ccb *ccb;
3039 dma_addr_t sense_buf;
3040
3041 /*
3042 SCSI REQUEST_SENSE commands will be executed automatically by the
3043 Host Adapter for any errors, so they should not be executed
3044 explicitly unless the Sense Data is zero indicating that no error
3045 occurred.
3046 */
3047 if (cdb[0] == REQUEST_SENSE && command->sense_buffer[0] != 0) {
3048 command->result = DID_OK << 16;
3049 comp_cb(command);
3050 return 0;
3051 }
3052 /*
3053 Allocate a CCB from the Host Adapter's free list. In the unlikely
3054 event that there are none available and memory allocation fails,
3055 wait 1 second and try again. If that fails, the Host Adapter is
3056 probably hung so signal an error as a Host Adapter Hard Reset
3057 should be initiated soon.
3058 */
3059 ccb = blogic_alloc_ccb(adapter);
3060 if (ccb == NULL) {
3061 spin_unlock_irq(adapter->scsi_host->host_lock);
3062 blogic_delay(1);
3063 spin_lock_irq(adapter->scsi_host->host_lock);
3064 ccb = blogic_alloc_ccb(adapter);
3065 if (ccb == NULL) {
3066 command->result = DID_ERROR << 16;
3067 comp_cb(command);
3068 return 0;
3069 }
3070 }
3071
3072 /*
3073 Initialize the fields in the BusLogic Command Control Block (CCB).
3074 */
3075 count = scsi_dma_map(command);
3076 BUG_ON(count < 0);
3077 if (count) {
3078 struct scatterlist *sg;
3079 int i;
3080
3081 ccb->opcode = BLOGIC_INITIATOR_CCB_SG;
3082 ccb->datalen = count * sizeof(struct blogic_sg_seg);
3083 if (blogic_multimaster_type(adapter))
3084 ccb->data = (void *)((unsigned int) ccb->dma_handle +
3085 ((unsigned long) &ccb->sglist -
3086 (unsigned long) ccb));
3087 else
3088 ccb->data = ccb->sglist;
3089
3090 scsi_for_each_sg(command, sg, count, i) {
3091 ccb->sglist[i].segbytes = sg_dma_len(sg);
3092 ccb->sglist[i].segdata = sg_dma_address(sg);
3093 }
3094 } else if (!count) {
3095 ccb->opcode = BLOGIC_INITIATOR_CCB;
3096 ccb->datalen = buflen;
3097 ccb->data = 0;
3098 }
3099
3100 switch (cdb[0]) {
3101 case READ_6:
3102 case READ_10:
3103 ccb->datadir = BLOGIC_DATAIN_CHECKED;
3104 tgt_stats[tgt_id].read_cmds++;
3105 blogic_addcount(&tgt_stats[tgt_id].bytesread, buflen);
3106 blogic_incszbucket(tgt_stats[tgt_id].read_sz_buckets, buflen);
3107 break;
3108 case WRITE_6:
3109 case WRITE_10:
3110 ccb->datadir = BLOGIC_DATAOUT_CHECKED;
3111 tgt_stats[tgt_id].write_cmds++;
3112 blogic_addcount(&tgt_stats[tgt_id].byteswritten, buflen);
3113 blogic_incszbucket(tgt_stats[tgt_id].write_sz_buckets, buflen);
3114 break;
3115 default:
3116 ccb->datadir = BLOGIC_UNCHECKED_TX;
3117 break;
3118 }
3119 ccb->cdblen = cdblen;
3120 ccb->adapter_status = 0;
3121 ccb->tgt_status = 0;
3122 ccb->tgt_id = tgt_id;
3123 ccb->lun = lun;
3124 ccb->tag_enable = false;
3125 ccb->legacytag_enable = false;
3126 /*
3127 BusLogic recommends that after a Reset the first couple of
3128 commands that are sent to a Target Device be sent in a non
3129 Tagged Queue fashion so that the Host Adapter and Target Device
3130 can establish Synchronous and Wide Transfer before Queue Tag
3131 messages can interfere with the Synchronous and Wide Negotiation
3132 messages. By waiting to enable Tagged Queuing until after the
3133 first BLOGIC_MAX_TAG_DEPTH commands have been queued, it is
3134 assured that after a Reset any pending commands are requeued
3135 before Tagged Queuing is enabled and that the Tagged Queuing
3136 message will not occur while the partition table is being printed.
3137 In addition, some devices do not properly handle the transition
3138 from non-tagged to tagged commands, so it is necessary to wait
3139 until there are no pending commands for a target device
3140 before queuing tagged commands.
3141 */
3142 if (adapter->cmds_since_rst[tgt_id]++ >= BLOGIC_MAX_TAG_DEPTH &&
3143 !tgt_flags->tagq_active &&
3144 adapter->active_cmds[tgt_id] == 0
3145 && tgt_flags->tagq_ok &&
3146 (adapter->tagq_ok & (1 << tgt_id))) {
3147 tgt_flags->tagq_active = true;
3148 blogic_notice("Tagged Queuing now active for Target %d\n",
3149 adapter, tgt_id);
3150 }
3151 if (tgt_flags->tagq_active) {
3152 enum blogic_queuetag queuetag = BLOGIC_SIMPLETAG;
3153 /*
3154 When using Tagged Queuing with Simple Queue Tags, it
3155 appears that disk drive controllers do not guarantee that
3156 a queued command will not remain in a disconnected state
3157 indefinitely if commands that read or write nearer the
3158 head position continue to arrive without interruption.
3159 Therefore, for each Target Device this driver keeps track
3160 of the last time either the queue was empty or an Ordered
3161 Queue Tag was issued. If more than 4 seconds (one fifth
3162 of the 20 second disk timeout) have elapsed since this
3163 last sequence point, this command will be issued with an
3164 Ordered Queue Tag rather than a Simple Queue Tag, which
3165 forces the Target Device to complete all previously
3166 queued commands before this command may be executed.
3167 */
3168 if (adapter->active_cmds[tgt_id] == 0)
3169 adapter->last_seqpoint[tgt_id] = jiffies;
3170 else if (time_after(jiffies,
3171 adapter->last_seqpoint[tgt_id] + 4 * HZ)) {
3172 adapter->last_seqpoint[tgt_id] = jiffies;
3173 queuetag = BLOGIC_ORDEREDTAG;
3174 }
3175 if (adapter->ext_lun) {
3176 ccb->tag_enable = true;
3177 ccb->queuetag = queuetag;
3178 } else {
3179 ccb->legacytag_enable = true;
3180 ccb->legacy_tag = queuetag;
3181 }
3182 }
3183 memcpy(ccb->cdb, cdb, cdblen);
3184 ccb->sense_datalen = SCSI_SENSE_BUFFERSIZE;
3185 ccb->command = command;
3186 sense_buf = pci_map_single(adapter->pci_device,
3187 command->sense_buffer, ccb->sense_datalen,
3188 PCI_DMA_FROMDEVICE);
3189 if (dma_mapping_error(&adapter->pci_device->dev, sense_buf)) {
3190 blogic_err("DMA mapping for sense data buffer failed\n",
3191 adapter);
3192 blogic_dealloc_ccb(ccb, 0);
3193 return SCSI_MLQUEUE_HOST_BUSY;
3194 }
3195 ccb->sensedata = sense_buf;
3196 command->scsi_done = comp_cb;
3197 if (blogic_multimaster_type(adapter)) {
3198 /*
3199 Place the CCB in an Outgoing Mailbox. The higher levels
3200 of the SCSI Subsystem should not attempt to queue more
3201 commands than can be placed in Outgoing Mailboxes, so
3202 there should always be one free. In the unlikely event
3203 that there are none available, wait 1 second and try
3204 again. If that fails, the Host Adapter is probably hung
3205 so signal an error as a Host Adapter Hard Reset should
3206 be initiated soon.
3207 */
3208 if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START, ccb)) {
3209 spin_unlock_irq(adapter->scsi_host->host_lock);
3210 blogic_warn("Unable to write Outgoing Mailbox - " "Pausing for 1 second\n", adapter);
3211 blogic_delay(1);
3212 spin_lock_irq(adapter->scsi_host->host_lock);
3213 if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START,
3214 ccb)) {
3215 blogic_warn("Still unable to write Outgoing Mailbox - " "Host Adapter Dead?\n", adapter);
3216 blogic_dealloc_ccb(ccb, 1);
3217 command->result = DID_ERROR << 16;
3218 command->scsi_done(command);
3219 }
3220 }
3221 } else {
3222 /*
3223 Call the FlashPoint SCCB Manager to start execution of
3224 the CCB.
3225 */
3226 ccb->status = BLOGIC_CCB_ACTIVE;
3227 adapter->active_cmds[tgt_id]++;
3228 tgt_stats[tgt_id].cmds_tried++;
3229 FlashPoint_StartCCB(adapter->cardhandle, ccb);
3230 /*
3231 The Command may have already completed and
3232 blogic_qcompleted_ccb been called, or it may still be
3233 pending.
3234 */
3235 if (ccb->status == BLOGIC_CCB_COMPLETE)
3236 blogic_process_ccbs(adapter);
3237 }
3238 return 0;
3239}
3240
3241static DEF_SCSI_QCMD(blogic_qcmd)
3242
3243#if 0
3244/*
3245 blogic_abort aborts Command if possible.
3246*/
3247
3248static int blogic_abort(struct scsi_cmnd *command)
3249{
3250 struct blogic_adapter *adapter =
3251 (struct blogic_adapter *) command->device->host->hostdata;
3252
3253 int tgt_id = command->device->id;
3254 struct blogic_ccb *ccb;
3255 blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_request);
3256
3257 /*
3258 Attempt to find an Active CCB for this Command. If no Active
3259 CCB for this Command is found, then no Abort is necessary.
3260 */
3261 for (ccb = adapter->all_ccbs; ccb != NULL; ccb = ccb->next_all)
3262 if (ccb->command == command)
3263 break;
3264 if (ccb == NULL) {
3265 blogic_warn("Unable to Abort Command to Target %d - No CCB Found\n", adapter, tgt_id);
3266 return SUCCESS;
3267 } else if (ccb->status == BLOGIC_CCB_COMPLETE) {
3268 blogic_warn("Unable to Abort Command to Target %d - CCB Completed\n", adapter, tgt_id);
3269 return SUCCESS;
3270 } else if (ccb->status == BLOGIC_CCB_RESET) {
3271 blogic_warn("Unable to Abort Command to Target %d - CCB Reset\n", adapter, tgt_id);
3272 return SUCCESS;
3273 }
3274 if (blogic_multimaster_type(adapter)) {
3275 /*
3276 Attempt to Abort this CCB. MultiMaster Firmware versions
3277 prior to 5.xx do not generate Abort Tag messages, but only
3278 generate the non-tagged Abort message. Since non-tagged
3279 commands are not sent by the Host Adapter until the queue
3280 of outstanding tagged commands has completed, and the
3281 Abort message is treated as a non-tagged command, it is
3282 effectively impossible to abort commands when Tagged
3283 Queuing is active. Firmware version 5.xx does generate
3284 Abort Tag messages, so it is possible to abort commands
3285 when Tagged Queuing is active.
3286 */
3287 if (adapter->tgt_flags[tgt_id].tagq_active &&
3288 adapter->fw_ver[0] < '5') {
3289 blogic_warn("Unable to Abort CCB #%ld to Target %d - Abort Tag Not Supported\n", adapter, ccb->serial, tgt_id);
3290 return FAILURE;
3291 } else if (blogic_write_outbox(adapter, BLOGIC_MBOX_ABORT,
3292 ccb)) {
3293 blogic_warn("Aborting CCB #%ld to Target %d\n",
3294 adapter, ccb->serial, tgt_id);
3295 blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried);
3296 return SUCCESS;
3297 } else {
3298 blogic_warn("Unable to Abort CCB #%ld to Target %d - No Outgoing Mailboxes\n", adapter, ccb->serial, tgt_id);
3299 return FAILURE;
3300 }
3301 } else {
3302 /*
3303 Call the FlashPoint SCCB Manager to abort execution of
3304 the CCB.
3305 */
3306 blogic_warn("Aborting CCB #%ld to Target %d\n", adapter,
3307 ccb->serial, tgt_id);
3308 blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried);
3309 FlashPoint_AbortCCB(adapter->cardhandle, ccb);
3310 /*
3311 The Abort may have already been completed and
3312 blogic_qcompleted_ccb been called, or it
3313 may still be pending.
3314 */
3315 if (ccb->status == BLOGIC_CCB_COMPLETE)
3316 blogic_process_ccbs(adapter);
3317 return SUCCESS;
3318 }
3319 return SUCCESS;
3320}
3321
3322#endif
3323/*
3324 blogic_resetadapter resets Host Adapter if possible, marking all
3325 currently executing SCSI Commands as having been Reset.
3326*/
3327
3328static int blogic_resetadapter(struct blogic_adapter *adapter, bool hard_reset)
3329{
3330 struct blogic_ccb *ccb;
3331 int tgt_id;
3332
3333 /*
3334 * Attempt to Reset and Reinitialize the Host Adapter.
3335 */
3336
3337 if (!(blogic_hwreset(adapter, hard_reset) &&
3338 blogic_initadapter(adapter))) {
3339 blogic_err("Resetting %s Failed\n", adapter,
3340 adapter->full_model);
3341 return FAILURE;
3342 }
3343
3344 /*
3345 * Deallocate all currently executing CCBs.
3346 */
3347
3348 for (ccb = adapter->all_ccbs; ccb != NULL; ccb = ccb->next_all)
3349 if (ccb->status == BLOGIC_CCB_ACTIVE)
3350 blogic_dealloc_ccb(ccb, 1);
3351 /*
3352 * Wait a few seconds between the Host Adapter Hard Reset which
3353 * initiates a SCSI Bus Reset and issuing any SCSI Commands. Some
3354 * SCSI devices get confused if they receive SCSI Commands too soon
3355 * after a SCSI Bus Reset.
3356 */
3357
3358 if (hard_reset) {
3359 spin_unlock_irq(adapter->scsi_host->host_lock);
3360 blogic_delay(adapter->bus_settle_time);
3361 spin_lock_irq(adapter->scsi_host->host_lock);
3362 }
3363
3364 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) {
3365 adapter->last_resettried[tgt_id] = jiffies;
3366 adapter->last_resetdone[tgt_id] = jiffies;
3367 }
3368 return SUCCESS;
3369}
3370
3371/*
3372 blogic_diskparam returns the Heads/Sectors/Cylinders BIOS Disk
3373 Parameters for Disk. The default disk geometry is 64 heads, 32 sectors, and
3374 the appropriate number of cylinders so as not to exceed drive capacity. In
3375 order for disks equal to or larger than 1 GB to be addressable by the BIOS
3376 without exceeding the BIOS limitation of 1024 cylinders, Extended Translation
3377 may be enabled in AutoSCSI on FlashPoint Host Adapters and on "W" and "C"
3378 series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A"
3379 series MultiMaster Host Adapters. With Extended Translation enabled, drives
3380 between 1 GB inclusive and 2 GB exclusive are given a disk geometry of 128
3381 heads and 32 sectors, and drives above 2 GB inclusive are given a disk
3382 geometry of 255 heads and 63 sectors. However, if the BIOS detects that the
3383 Extended Translation setting does not match the geometry in the partition
3384 table, then the translation inferred from the partition table will be used by
3385 the BIOS, and a warning may be displayed.
3386*/
3387
3388static int blogic_diskparam(struct scsi_device *sdev, struct block_device *dev,
3389 sector_t capacity, int *params)
3390{
3391 struct blogic_adapter *adapter =
3392 (struct blogic_adapter *) sdev->host->hostdata;
3393 struct bios_diskparam *diskparam = (struct bios_diskparam *) params;
3394 unsigned char *buf;
3395
3396 if (adapter->ext_trans_enable && capacity >= 2 * 1024 * 1024 /* 1 GB in 512 byte sectors */) {
3397 if (capacity >= 4 * 1024 * 1024 /* 2 GB in 512 byte sectors */) {
3398 diskparam->heads = 255;
3399 diskparam->sectors = 63;
3400 } else {
3401 diskparam->heads = 128;
3402 diskparam->sectors = 32;
3403 }
3404 } else {
3405 diskparam->heads = 64;
3406 diskparam->sectors = 32;
3407 }
3408 diskparam->cylinders = (unsigned long) capacity / (diskparam->heads * diskparam->sectors);
3409 buf = scsi_bios_ptable(dev);
3410 if (buf == NULL)
3411 return 0;
3412 /*
3413 If the boot sector partition table flag is valid, search for
3414 a partition table entry whose end_head matches one of the
3415 standard BusLogic geometry translations (64/32, 128/32, or 255/63).
3416 */
3417 if (*(unsigned short *) (buf + 64) == 0xAA55) {
3418 struct partition *part1_entry = (struct partition *) buf;
3419 struct partition *part_entry = part1_entry;
3420 int saved_cyl = diskparam->cylinders, part_no;
3421 unsigned char part_end_head = 0, part_end_sector = 0;
3422
3423 for (part_no = 0; part_no < 4; part_no++) {
3424 part_end_head = part_entry->end_head;
3425 part_end_sector = part_entry->end_sector & 0x3F;
3426 if (part_end_head == 64 - 1) {
3427 diskparam->heads = 64;
3428 diskparam->sectors = 32;
3429 break;
3430 } else if (part_end_head == 128 - 1) {
3431 diskparam->heads = 128;
3432 diskparam->sectors = 32;
3433 break;
3434 } else if (part_end_head == 255 - 1) {
3435 diskparam->heads = 255;
3436 diskparam->sectors = 63;
3437 break;
3438 }
3439 part_entry++;
3440 }
3441 if (part_no == 4) {
3442 part_end_head = part1_entry->end_head;
3443 part_end_sector = part1_entry->end_sector & 0x3F;
3444 }
3445 diskparam->cylinders = (unsigned long) capacity / (diskparam->heads * diskparam->sectors);
3446 if (part_no < 4 && part_end_sector == diskparam->sectors) {
3447 if (diskparam->cylinders != saved_cyl)
3448 blogic_warn("Adopting Geometry %d/%d from Partition Table\n", adapter, diskparam->heads, diskparam->sectors);
3449 } else if (part_end_head > 0 || part_end_sector > 0) {
3450 blogic_warn("Warning: Partition Table appears to " "have Geometry %d/%d which is\n", adapter, part_end_head + 1, part_end_sector);
3451 blogic_warn("not compatible with current BusLogic " "Host Adapter Geometry %d/%d\n", adapter, diskparam->heads, diskparam->sectors);
3452 }
3453 }
3454 kfree(buf);
3455 return 0;
3456}
3457
3458
3459/*
3460 BugLogic_ProcDirectoryInfo implements /proc/scsi/BusLogic/<N>.
3461*/
3462
3463static int blogic_write_info(struct Scsi_Host *shost, char *procbuf,
3464 int bytes_avail)
3465{
3466 struct blogic_adapter *adapter =
3467 (struct blogic_adapter *) shost->hostdata;
3468 struct blogic_tgt_stats *tgt_stats;
3469
3470 tgt_stats = adapter->tgt_stats;
3471 adapter->ext_resets = 0;
3472 adapter->adapter_intern_errors = 0;
3473 memset(tgt_stats, 0, BLOGIC_MAXDEV * sizeof(struct blogic_tgt_stats));
3474 return 0;
3475}
3476
3477static int blogic_show_info(struct seq_file *m, struct Scsi_Host *shost)
3478{
3479 struct blogic_adapter *adapter = (struct blogic_adapter *) shost->hostdata;
3480 struct blogic_tgt_stats *tgt_stats;
3481 int tgt;
3482
3483 tgt_stats = adapter->tgt_stats;
3484 seq_write(m, adapter->msgbuf, adapter->msgbuflen);
3485 seq_printf(m, "\n\
3486Current Driver Queue Depth: %d\n\
3487Currently Allocated CCBs: %d\n", adapter->drvr_qdepth, adapter->alloc_ccbs);
3488 seq_puts(m, "\n\n\
3489 DATA TRANSFER STATISTICS\n\
3490\n\
3491Target Tagged Queuing Queue Depth Active Attempted Completed\n\
3492====== ============== =========== ====== ========= =========\n");
3493 for (tgt = 0; tgt < adapter->maxdev; tgt++) {
3494 struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt];
3495 if (!tgt_flags->tgt_exists)
3496 continue;
3497 seq_printf(m, " %2d %s", tgt, (tgt_flags->tagq_ok ? (tgt_flags->tagq_active ? " Active" : (adapter->tagq_ok & (1 << tgt)
3498 ? " Permitted" : " Disabled"))
3499 : "Not Supported"));
3500 seq_printf(m,
3501 " %3d %3u %9u %9u\n", adapter->qdepth[tgt], adapter->active_cmds[tgt], tgt_stats[tgt].cmds_tried, tgt_stats[tgt].cmds_complete);
3502 }
3503 seq_puts(m, "\n\
3504Target Read Commands Write Commands Total Bytes Read Total Bytes Written\n\
3505====== ============= ============== =================== ===================\n");
3506 for (tgt = 0; tgt < adapter->maxdev; tgt++) {
3507 struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt];
3508 if (!tgt_flags->tgt_exists)
3509 continue;
3510 seq_printf(m, " %2d %9u %9u", tgt, tgt_stats[tgt].read_cmds, tgt_stats[tgt].write_cmds);
3511 if (tgt_stats[tgt].bytesread.billions > 0)
3512 seq_printf(m, " %9u%09u", tgt_stats[tgt].bytesread.billions, tgt_stats[tgt].bytesread.units);
3513 else
3514 seq_printf(m, " %9u", tgt_stats[tgt].bytesread.units);
3515 if (tgt_stats[tgt].byteswritten.billions > 0)
3516 seq_printf(m, " %9u%09u\n", tgt_stats[tgt].byteswritten.billions, tgt_stats[tgt].byteswritten.units);
3517 else
3518 seq_printf(m, " %9u\n", tgt_stats[tgt].byteswritten.units);
3519 }
3520 seq_puts(m, "\n\
3521Target Command 0-1KB 1-2KB 2-4KB 4-8KB 8-16KB\n\
3522====== ======= ========= ========= ========= ========= =========\n");
3523 for (tgt = 0; tgt < adapter->maxdev; tgt++) {
3524 struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt];
3525 if (!tgt_flags->tgt_exists)
3526 continue;
3527 seq_printf(m,
3528 " %2d Read %9u %9u %9u %9u %9u\n", tgt,
3529 tgt_stats[tgt].read_sz_buckets[0],
3530 tgt_stats[tgt].read_sz_buckets[1], tgt_stats[tgt].read_sz_buckets[2], tgt_stats[tgt].read_sz_buckets[3], tgt_stats[tgt].read_sz_buckets[4]);
3531 seq_printf(m,
3532 " %2d Write %9u %9u %9u %9u %9u\n", tgt,
3533 tgt_stats[tgt].write_sz_buckets[0],
3534 tgt_stats[tgt].write_sz_buckets[1], tgt_stats[tgt].write_sz_buckets[2], tgt_stats[tgt].write_sz_buckets[3], tgt_stats[tgt].write_sz_buckets[4]);
3535 }
3536 seq_puts(m, "\n\
3537Target Command 16-32KB 32-64KB 64-128KB 128-256KB 256KB+\n\
3538====== ======= ========= ========= ========= ========= =========\n");
3539 for (tgt = 0; tgt < adapter->maxdev; tgt++) {
3540 struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt];
3541 if (!tgt_flags->tgt_exists)
3542 continue;
3543 seq_printf(m,
3544 " %2d Read %9u %9u %9u %9u %9u\n", tgt,
3545 tgt_stats[tgt].read_sz_buckets[5],
3546 tgt_stats[tgt].read_sz_buckets[6], tgt_stats[tgt].read_sz_buckets[7], tgt_stats[tgt].read_sz_buckets[8], tgt_stats[tgt].read_sz_buckets[9]);
3547 seq_printf(m,
3548 " %2d Write %9u %9u %9u %9u %9u\n", tgt,
3549 tgt_stats[tgt].write_sz_buckets[5],
3550 tgt_stats[tgt].write_sz_buckets[6], tgt_stats[tgt].write_sz_buckets[7], tgt_stats[tgt].write_sz_buckets[8], tgt_stats[tgt].write_sz_buckets[9]);
3551 }
3552 seq_puts(m, "\n\n\
3553 ERROR RECOVERY STATISTICS\n\
3554\n\
3555 Command Aborts Bus Device Resets Host Adapter Resets\n\
3556Target Requested Completed Requested Completed Requested Completed\n\
3557 ID \\\\\\\\ Attempted //// \\\\\\\\ Attempted //// \\\\\\\\ Attempted ////\n\
3558====== ===== ===== ===== ===== ===== ===== ===== ===== =====\n");
3559 for (tgt = 0; tgt < adapter->maxdev; tgt++) {
3560 struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt];
3561 if (!tgt_flags->tgt_exists)
3562 continue;
3563 seq_printf(m, " %2d %5d %5d %5d %5d %5d %5d %5d %5d %5d\n",
3564 tgt, tgt_stats[tgt].aborts_request,
3565 tgt_stats[tgt].aborts_tried,
3566 tgt_stats[tgt].aborts_done,
3567 tgt_stats[tgt].bdr_request,
3568 tgt_stats[tgt].bdr_tried,
3569 tgt_stats[tgt].bdr_done,
3570 tgt_stats[tgt].adapter_reset_req,
3571 tgt_stats[tgt].adapter_reset_attempt,
3572 tgt_stats[tgt].adapter_reset_done);
3573 }
3574 seq_printf(m, "\nExternal Host Adapter Resets: %d\n", adapter->ext_resets);
3575 seq_printf(m, "Host Adapter Internal Errors: %d\n", adapter->adapter_intern_errors);
3576 return 0;
3577}
3578
3579
3580/*
3581 blogic_msg prints Driver Messages.
3582*/
3583
3584static void blogic_msg(enum blogic_msglevel msglevel, char *fmt,
3585 struct blogic_adapter *adapter, ...)
3586{
3587 static char buf[BLOGIC_LINEBUF_SIZE];
3588 static bool begin = true;
3589 va_list args;
3590 int len = 0;
3591
3592 va_start(args, adapter);
3593 len = vsprintf(buf, fmt, args);
3594 va_end(args);
3595 if (msglevel == BLOGIC_ANNOUNCE_LEVEL) {
3596 static int msglines = 0;
3597 strcpy(&adapter->msgbuf[adapter->msgbuflen], buf);
3598 adapter->msgbuflen += len;
3599 if (++msglines <= 2)
3600 printk("%sscsi: %s", blogic_msglevelmap[msglevel], buf);
3601 } else if (msglevel == BLOGIC_INFO_LEVEL) {
3602 strcpy(&adapter->msgbuf[adapter->msgbuflen], buf);
3603 adapter->msgbuflen += len;
3604 if (begin) {
3605 if (buf[0] != '\n' || len > 1)
3606 printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf);
3607 } else
3608 printk("%s", buf);
3609 } else {
3610 if (begin) {
3611 if (adapter != NULL && adapter->adapter_initd)
3612 printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf);
3613 else
3614 printk("%s%s", blogic_msglevelmap[msglevel], buf);
3615 } else
3616 printk("%s", buf);
3617 }
3618 begin = (buf[len - 1] == '\n');
3619}
3620
3621
3622/*
3623 blogic_parse parses an individual option keyword. It returns true
3624 and updates the pointer if the keyword is recognized and false otherwise.
3625*/
3626
3627static bool __init blogic_parse(char **str, char *keyword)
3628{
3629 char *pointer = *str;
3630 while (*keyword != '\0') {
3631 char strch = *pointer++;
3632 char keywordch = *keyword++;
3633 if (strch >= 'A' && strch <= 'Z')
3634 strch += 'a' - 'Z';
3635 if (keywordch >= 'A' && keywordch <= 'Z')
3636 keywordch += 'a' - 'Z';
3637 if (strch != keywordch)
3638 return false;
3639 }
3640 *str = pointer;
3641 return true;
3642}
3643
3644
3645/*
3646 blogic_parseopts handles processing of BusLogic Driver Options
3647 specifications.
3648
3649 BusLogic Driver Options may be specified either via the Linux Kernel Command
3650 Line or via the Loadable Kernel Module Installation Facility. Driver Options
3651 for multiple host adapters may be specified either by separating the option
3652 strings by a semicolon, or by specifying multiple "BusLogic=" strings on the
3653 command line. Individual option specifications for a single host adapter are
3654 separated by commas. The Probing and Debugging Options apply to all host
3655 adapters whereas the remaining options apply individually only to the
3656 selected host adapter.
3657
3658 The BusLogic Driver Probing Options are described in
3659 <file:Documentation/scsi/BusLogic.txt>.
3660*/
3661
3662static int __init blogic_parseopts(char *options)
3663{
3664 while (true) {
3665 struct blogic_drvr_options *drvr_opts =
3666 &blogic_drvr_options[blogic_drvr_options_count++];
3667 int tgt_id;
3668
3669 memset(drvr_opts, 0, sizeof(struct blogic_drvr_options));
3670 while (*options != '\0' && *options != ';') {
3671 /* Probing Options. */
3672 if (blogic_parse(&options, "IO:")) {
3673 unsigned long io_addr = simple_strtoul(options,
3674 &options, 0);
3675 blogic_probe_options.limited_isa = true;
3676 switch (io_addr) {
3677 case 0x330:
3678 blogic_probe_options.probe330 = true;
3679 break;
3680 case 0x334:
3681 blogic_probe_options.probe334 = true;
3682 break;
3683 case 0x230:
3684 blogic_probe_options.probe230 = true;
3685 break;
3686 case 0x234:
3687 blogic_probe_options.probe234 = true;
3688 break;
3689 case 0x130:
3690 blogic_probe_options.probe130 = true;
3691 break;
3692 case 0x134:
3693 blogic_probe_options.probe134 = true;
3694 break;
3695 default:
3696 blogic_err("BusLogic: Invalid Driver Options " "(invalid I/O Address 0x%X)\n", NULL, io_addr);
3697 return 0;
3698 }
3699 } else if (blogic_parse(&options, "NoProbeISA"))
3700 blogic_probe_options.noprobe_isa = true;
3701 else if (blogic_parse(&options, "NoProbePCI"))
3702 blogic_probe_options.noprobe_pci = true;
3703 else if (blogic_parse(&options, "NoProbe"))
3704 blogic_probe_options.noprobe = true;
3705 else if (blogic_parse(&options, "NoSortPCI"))
3706 blogic_probe_options.nosort_pci = true;
3707 else if (blogic_parse(&options, "MultiMasterFirst"))
3708 blogic_probe_options.multimaster_first = true;
3709 else if (blogic_parse(&options, "FlashPointFirst"))
3710 blogic_probe_options.flashpoint_first = true;
3711 /* Tagged Queuing Options. */
3712 else if (blogic_parse(&options, "QueueDepth:[") ||
3713 blogic_parse(&options, "QD:[")) {
3714 for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) {
3715 unsigned short qdepth = simple_strtoul(options, &options, 0);
3716 if (qdepth > BLOGIC_MAX_TAG_DEPTH) {
3717 blogic_err("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, qdepth);
3718 return 0;
3719 }
3720 drvr_opts->qdepth[tgt_id] = qdepth;
3721 if (*options == ',')
3722 options++;
3723 else if (*options == ']')
3724 break;
3725 else {
3726 blogic_err("BusLogic: Invalid Driver Options " "(',' or ']' expected at '%s')\n", NULL, options);
3727 return 0;
3728 }
3729 }
3730 if (*options != ']') {
3731 blogic_err("BusLogic: Invalid Driver Options " "(']' expected at '%s')\n", NULL, options);
3732 return 0;
3733 } else
3734 options++;
3735 } else if (blogic_parse(&options, "QueueDepth:") || blogic_parse(&options, "QD:")) {
3736 unsigned short qdepth = simple_strtoul(options, &options, 0);
3737 if (qdepth == 0 ||
3738 qdepth > BLOGIC_MAX_TAG_DEPTH) {
3739 blogic_err("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, qdepth);
3740 return 0;
3741 }
3742 drvr_opts->common_qdepth = qdepth;
3743 for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++)
3744 drvr_opts->qdepth[tgt_id] = qdepth;
3745 } else if (blogic_parse(&options, "TaggedQueuing:") ||
3746 blogic_parse(&options, "TQ:")) {
3747 if (blogic_parse(&options, "Default")) {
3748 drvr_opts->tagq_ok = 0x0000;
3749 drvr_opts->tagq_ok_mask = 0x0000;
3750 } else if (blogic_parse(&options, "Enable")) {
3751 drvr_opts->tagq_ok = 0xFFFF;
3752 drvr_opts->tagq_ok_mask = 0xFFFF;
3753 } else if (blogic_parse(&options, "Disable")) {
3754 drvr_opts->tagq_ok = 0x0000;
3755 drvr_opts->tagq_ok_mask = 0xFFFF;
3756 } else {
3757 unsigned short tgt_bit;
3758 for (tgt_id = 0, tgt_bit = 1;
3759 tgt_id < BLOGIC_MAXDEV;
3760 tgt_id++, tgt_bit <<= 1)
3761 switch (*options++) {
3762 case 'Y':
3763 drvr_opts->tagq_ok |= tgt_bit;
3764 drvr_opts->tagq_ok_mask |= tgt_bit;
3765 break;
3766 case 'N':
3767 drvr_opts->tagq_ok &= ~tgt_bit;
3768 drvr_opts->tagq_ok_mask |= tgt_bit;
3769 break;
3770 case 'X':
3771 break;
3772 default:
3773 options--;
3774 tgt_id = BLOGIC_MAXDEV;
3775 break;
3776 }
3777 }
3778 }
3779 /* Miscellaneous Options. */
3780 else if (blogic_parse(&options, "BusSettleTime:") ||
3781 blogic_parse(&options, "BST:")) {
3782 unsigned short bus_settle_time =
3783 simple_strtoul(options, &options, 0);
3784 if (bus_settle_time > 5 * 60) {
3785 blogic_err("BusLogic: Invalid Driver Options " "(invalid Bus Settle Time %d)\n", NULL, bus_settle_time);
3786 return 0;
3787 }
3788 drvr_opts->bus_settle_time = bus_settle_time;
3789 } else if (blogic_parse(&options,
3790 "InhibitTargetInquiry"))
3791 drvr_opts->stop_tgt_inquiry = true;
3792 /* Debugging Options. */
3793 else if (blogic_parse(&options, "TraceProbe"))
3794 blogic_global_options.trace_probe = true;
3795 else if (blogic_parse(&options, "TraceHardwareReset"))
3796 blogic_global_options.trace_hw_reset = true;
3797 else if (blogic_parse(&options, "TraceConfiguration"))
3798 blogic_global_options.trace_config = true;
3799 else if (blogic_parse(&options, "TraceErrors"))
3800 blogic_global_options.trace_err = true;
3801 else if (blogic_parse(&options, "Debug")) {
3802 blogic_global_options.trace_probe = true;
3803 blogic_global_options.trace_hw_reset = true;
3804 blogic_global_options.trace_config = true;
3805 blogic_global_options.trace_err = true;
3806 }
3807 if (*options == ',')
3808 options++;
3809 else if (*options != ';' && *options != '\0') {
3810 blogic_err("BusLogic: Unexpected Driver Option '%s' " "ignored\n", NULL, options);
3811 *options = '\0';
3812 }
3813 }
3814 if (!(blogic_drvr_options_count == 0 ||
3815 blogic_probeinfo_count == 0 ||
3816 blogic_drvr_options_count == blogic_probeinfo_count)) {
3817 blogic_err("BusLogic: Invalid Driver Options " "(all or no I/O Addresses must be specified)\n", NULL);
3818 return 0;
3819 }
3820 /*
3821 Tagged Queuing is disabled when the Queue Depth is 1 since queuing
3822 multiple commands is not possible.
3823 */
3824 for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++)
3825 if (drvr_opts->qdepth[tgt_id] == 1) {
3826 unsigned short tgt_bit = 1 << tgt_id;
3827 drvr_opts->tagq_ok &= ~tgt_bit;
3828 drvr_opts->tagq_ok_mask |= tgt_bit;
3829 }
3830 if (*options == ';')
3831 options++;
3832 if (*options == '\0')
3833 return 0;
3834 }
3835 return 1;
3836}
3837
3838/*
3839 Get it all started
3840*/
3841
3842static struct scsi_host_template blogic_template = {
3843 .module = THIS_MODULE,
3844 .proc_name = "BusLogic",
3845 .write_info = blogic_write_info,
3846 .show_info = blogic_show_info,
3847 .name = "BusLogic",
3848 .info = blogic_drvr_info,
3849 .queuecommand = blogic_qcmd,
3850 .slave_configure = blogic_slaveconfig,
3851 .bios_param = blogic_diskparam,
3852 .eh_host_reset_handler = blogic_hostreset,
3853#if 0
3854 .eh_abort_handler = blogic_abort,
3855#endif
3856 .unchecked_isa_dma = 1,
3857 .max_sectors = 128,
3858 .use_clustering = ENABLE_CLUSTERING,
3859};
3860
3861/*
3862 blogic_setup handles processing of Kernel Command Line Arguments.
3863*/
3864
3865static int __init blogic_setup(char *str)
3866{
3867 int ints[3];
3868
3869 (void) get_options(str, ARRAY_SIZE(ints), ints);
3870
3871 if (ints[0] != 0) {
3872 blogic_err("BusLogic: Obsolete Command Line Entry " "Format Ignored\n", NULL);
3873 return 0;
3874 }
3875 if (str == NULL || *str == '\0')
3876 return 0;
3877 return blogic_parseopts(str);
3878}
3879
3880/*
3881 * Exit function. Deletes all hosts associated with this driver.
3882 */
3883
3884static void __exit blogic_exit(void)
3885{
3886 struct blogic_adapter *ha, *next;
3887
3888 list_for_each_entry_safe(ha, next, &blogic_host_list, host_list)
3889 blogic_deladapter(ha);
3890}
3891
3892__setup("BusLogic=", blogic_setup);
3893
3894#ifdef MODULE
3895/*static struct pci_device_id blogic_pci_tbl[] = {
3896 { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER,
3897 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
3898 { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC,
3899 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
3900 { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT,
3901 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
3902 { }
3903};*/
3904static const struct pci_device_id blogic_pci_tbl[] = {
3905 {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER)},
3906 {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC)},
3907 {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT)},
3908 {0, },
3909};
3910#endif
3911MODULE_DEVICE_TABLE(pci, blogic_pci_tbl);
3912
3913module_init(blogic_init);
3914module_exit(blogic_exit);
1
2/*
3
4 Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
5
6 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
7
8 This program is free software; you may redistribute and/or modify it under
9 the terms of the GNU General Public License Version 2 as published by the
10 Free Software Foundation.
11
12 This program is distributed in the hope that it will be useful, but
13 WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
14 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
15 for complete details.
16
17 The author respectfully requests that any modifications to this software be
18 sent directly to him for evaluation and testing.
19
20 Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
21 advice has been invaluable, to David Gentzel, for writing the original Linux
22 BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
23
24 Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
25 Manager available as freely redistributable source code.
26
27*/
28
29#define BusLogic_DriverVersion "2.1.16"
30#define BusLogic_DriverDate "18 July 2002"
31
32#include <linux/module.h>
33#include <linux/init.h>
34#include <linux/interrupt.h>
35#include <linux/types.h>
36#include <linux/blkdev.h>
37#include <linux/delay.h>
38#include <linux/ioport.h>
39#include <linux/mm.h>
40#include <linux/stat.h>
41#include <linux/pci.h>
42#include <linux/spinlock.h>
43#include <linux/jiffies.h>
44#include <linux/dma-mapping.h>
45#include <linux/slab.h>
46#include <scsi/scsicam.h>
47
48#include <asm/dma.h>
49#include <asm/io.h>
50
51#include <scsi/scsi.h>
52#include <scsi/scsi_cmnd.h>
53#include <scsi/scsi_device.h>
54#include <scsi/scsi_host.h>
55#include <scsi/scsi_tcq.h>
56#include "BusLogic.h"
57#include "FlashPoint.c"
58
59#ifndef FAILURE
60#define FAILURE (-1)
61#endif
62
63static struct scsi_host_template Bus_Logic_template;
64
65/*
66 BusLogic_DriverOptionsCount is a count of the number of BusLogic Driver
67 Options specifications provided via the Linux Kernel Command Line or via
68 the Loadable Kernel Module Installation Facility.
69*/
70
71static int BusLogic_DriverOptionsCount;
72
73
74/*
75 BusLogic_DriverOptions is an array of Driver Options structures representing
76 BusLogic Driver Options specifications provided via the Linux Kernel Command
77 Line or via the Loadable Kernel Module Installation Facility.
78*/
79
80static struct BusLogic_DriverOptions BusLogic_DriverOptions[BusLogic_MaxHostAdapters];
81
82
83/*
84 BusLogic can be assigned a string by insmod.
85*/
86
87MODULE_LICENSE("GPL");
88#ifdef MODULE
89static char *BusLogic;
90module_param(BusLogic, charp, 0);
91#endif
92
93
94/*
95 BusLogic_ProbeOptions is a set of Probe Options to be applied across
96 all BusLogic Host Adapters.
97*/
98
99static struct BusLogic_ProbeOptions BusLogic_ProbeOptions;
100
101
102/*
103 BusLogic_GlobalOptions is a set of Global Options to be applied across
104 all BusLogic Host Adapters.
105*/
106
107static struct BusLogic_GlobalOptions BusLogic_GlobalOptions;
108
109static LIST_HEAD(BusLogic_host_list);
110
111/*
112 BusLogic_ProbeInfoCount is the number of entries in BusLogic_ProbeInfoList.
113*/
114
115static int BusLogic_ProbeInfoCount;
116
117
118/*
119 BusLogic_ProbeInfoList is the list of I/O Addresses and Bus Probe Information
120 to be checked for potential BusLogic Host Adapters. It is initialized by
121 interrogating the PCI Configuration Space on PCI machines as well as from the
122 list of standard BusLogic I/O Addresses.
123*/
124
125static struct BusLogic_ProbeInfo *BusLogic_ProbeInfoList;
126
127
128/*
129 BusLogic_CommandFailureReason holds a string identifying the reason why a
130 call to BusLogic_Command failed. It is only non-NULL when BusLogic_Command
131 returns a failure code.
132*/
133
134static char *BusLogic_CommandFailureReason;
135
136/*
137 BusLogic_AnnounceDriver announces the Driver Version and Date, Author's
138 Name, Copyright Notice, and Electronic Mail Address.
139*/
140
141static void BusLogic_AnnounceDriver(struct BusLogic_HostAdapter *HostAdapter)
142{
143 BusLogic_Announce("***** BusLogic SCSI Driver Version " BusLogic_DriverVersion " of " BusLogic_DriverDate " *****\n", HostAdapter);
144 BusLogic_Announce("Copyright 1995-1998 by Leonard N. Zubkoff " "<lnz@dandelion.com>\n", HostAdapter);
145}
146
147
148/*
149 BusLogic_DriverInfo returns the Host Adapter Name to identify this SCSI
150 Driver and Host Adapter.
151*/
152
153static const char *BusLogic_DriverInfo(struct Scsi_Host *Host)
154{
155 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Host->hostdata;
156 return HostAdapter->FullModelName;
157}
158
159/*
160 BusLogic_InitializeCCBs initializes a group of Command Control Blocks (CCBs)
161 for Host Adapter from the BlockSize bytes located at BlockPointer. The newly
162 created CCBs are added to Host Adapter's free list.
163*/
164
165static void BusLogic_InitializeCCBs(struct BusLogic_HostAdapter *HostAdapter, void *BlockPointer, int BlockSize, dma_addr_t BlockPointerHandle)
166{
167 struct BusLogic_CCB *CCB = (struct BusLogic_CCB *) BlockPointer;
168 unsigned int offset = 0;
169 memset(BlockPointer, 0, BlockSize);
170 CCB->AllocationGroupHead = BlockPointerHandle;
171 CCB->AllocationGroupSize = BlockSize;
172 while ((BlockSize -= sizeof(struct BusLogic_CCB)) >= 0) {
173 CCB->Status = BusLogic_CCB_Free;
174 CCB->HostAdapter = HostAdapter;
175 CCB->DMA_Handle = (u32) BlockPointerHandle + offset;
176 if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
177 CCB->CallbackFunction = BusLogic_QueueCompletedCCB;
178 CCB->BaseAddress = HostAdapter->FlashPointInfo.BaseAddress;
179 }
180 CCB->Next = HostAdapter->Free_CCBs;
181 CCB->NextAll = HostAdapter->All_CCBs;
182 HostAdapter->Free_CCBs = CCB;
183 HostAdapter->All_CCBs = CCB;
184 HostAdapter->AllocatedCCBs++;
185 CCB++;
186 offset += sizeof(struct BusLogic_CCB);
187 }
188}
189
190
191/*
192 BusLogic_CreateInitialCCBs allocates the initial CCBs for Host Adapter.
193*/
194
195static bool __init BusLogic_CreateInitialCCBs(struct BusLogic_HostAdapter *HostAdapter)
196{
197 int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(struct BusLogic_CCB);
198 void *BlockPointer;
199 dma_addr_t BlockPointerHandle;
200 while (HostAdapter->AllocatedCCBs < HostAdapter->InitialCCBs) {
201 BlockPointer = pci_alloc_consistent(HostAdapter->PCI_Device, BlockSize, &BlockPointerHandle);
202 if (BlockPointer == NULL) {
203 BusLogic_Error("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n", HostAdapter);
204 return false;
205 }
206 BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize, BlockPointerHandle);
207 }
208 return true;
209}
210
211
212/*
213 BusLogic_DestroyCCBs deallocates the CCBs for Host Adapter.
214*/
215
216static void BusLogic_DestroyCCBs(struct BusLogic_HostAdapter *HostAdapter)
217{
218 struct BusLogic_CCB *NextCCB = HostAdapter->All_CCBs, *CCB, *Last_CCB = NULL;
219 HostAdapter->All_CCBs = NULL;
220 HostAdapter->Free_CCBs = NULL;
221 while ((CCB = NextCCB) != NULL) {
222 NextCCB = CCB->NextAll;
223 if (CCB->AllocationGroupHead) {
224 if (Last_CCB)
225 pci_free_consistent(HostAdapter->PCI_Device, Last_CCB->AllocationGroupSize, Last_CCB, Last_CCB->AllocationGroupHead);
226 Last_CCB = CCB;
227 }
228 }
229 if (Last_CCB)
230 pci_free_consistent(HostAdapter->PCI_Device, Last_CCB->AllocationGroupSize, Last_CCB, Last_CCB->AllocationGroupHead);
231}
232
233
234/*
235 BusLogic_CreateAdditionalCCBs allocates Additional CCBs for Host Adapter. If
236 allocation fails and there are no remaining CCBs available, the Driver Queue
237 Depth is decreased to a known safe value to avoid potential deadlocks when
238 multiple host adapters share the same IRQ Channel.
239*/
240
241static void BusLogic_CreateAdditionalCCBs(struct BusLogic_HostAdapter *HostAdapter, int AdditionalCCBs, bool SuccessMessageP)
242{
243 int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(struct BusLogic_CCB);
244 int PreviouslyAllocated = HostAdapter->AllocatedCCBs;
245 void *BlockPointer;
246 dma_addr_t BlockPointerHandle;
247 if (AdditionalCCBs <= 0)
248 return;
249 while (HostAdapter->AllocatedCCBs - PreviouslyAllocated < AdditionalCCBs) {
250 BlockPointer = pci_alloc_consistent(HostAdapter->PCI_Device, BlockSize, &BlockPointerHandle);
251 if (BlockPointer == NULL)
252 break;
253 BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize, BlockPointerHandle);
254 }
255 if (HostAdapter->AllocatedCCBs > PreviouslyAllocated) {
256 if (SuccessMessageP)
257 BusLogic_Notice("Allocated %d additional CCBs (total now %d)\n", HostAdapter, HostAdapter->AllocatedCCBs - PreviouslyAllocated, HostAdapter->AllocatedCCBs);
258 return;
259 }
260 BusLogic_Notice("Failed to allocate additional CCBs\n", HostAdapter);
261 if (HostAdapter->DriverQueueDepth > HostAdapter->AllocatedCCBs - HostAdapter->TargetDeviceCount) {
262 HostAdapter->DriverQueueDepth = HostAdapter->AllocatedCCBs - HostAdapter->TargetDeviceCount;
263 HostAdapter->SCSI_Host->can_queue = HostAdapter->DriverQueueDepth;
264 }
265}
266
267/*
268 BusLogic_AllocateCCB allocates a CCB from Host Adapter's free list,
269 allocating more memory from the Kernel if necessary. The Host Adapter's
270 Lock should already have been acquired by the caller.
271*/
272
273static struct BusLogic_CCB *BusLogic_AllocateCCB(struct BusLogic_HostAdapter
274 *HostAdapter)
275{
276 static unsigned long SerialNumber = 0;
277 struct BusLogic_CCB *CCB;
278 CCB = HostAdapter->Free_CCBs;
279 if (CCB != NULL) {
280 CCB->SerialNumber = ++SerialNumber;
281 HostAdapter->Free_CCBs = CCB->Next;
282 CCB->Next = NULL;
283 if (HostAdapter->Free_CCBs == NULL)
284 BusLogic_CreateAdditionalCCBs(HostAdapter, HostAdapter->IncrementalCCBs, true);
285 return CCB;
286 }
287 BusLogic_CreateAdditionalCCBs(HostAdapter, HostAdapter->IncrementalCCBs, true);
288 CCB = HostAdapter->Free_CCBs;
289 if (CCB == NULL)
290 return NULL;
291 CCB->SerialNumber = ++SerialNumber;
292 HostAdapter->Free_CCBs = CCB->Next;
293 CCB->Next = NULL;
294 return CCB;
295}
296
297
298/*
299 BusLogic_DeallocateCCB deallocates a CCB, returning it to the Host Adapter's
300 free list. The Host Adapter's Lock should already have been acquired by the
301 caller.
302*/
303
304static void BusLogic_DeallocateCCB(struct BusLogic_CCB *CCB)
305{
306 struct BusLogic_HostAdapter *HostAdapter = CCB->HostAdapter;
307
308 scsi_dma_unmap(CCB->Command);
309 pci_unmap_single(HostAdapter->PCI_Device, CCB->SenseDataPointer,
310 CCB->SenseDataLength, PCI_DMA_FROMDEVICE);
311
312 CCB->Command = NULL;
313 CCB->Status = BusLogic_CCB_Free;
314 CCB->Next = HostAdapter->Free_CCBs;
315 HostAdapter->Free_CCBs = CCB;
316}
317
318
319/*
320 BusLogic_Command sends the command OperationCode to HostAdapter, optionally
321 providing ParameterLength bytes of ParameterData and receiving at most
322 ReplyLength bytes of ReplyData; any excess reply data is received but
323 discarded.
324
325 On success, this function returns the number of reply bytes read from
326 the Host Adapter (including any discarded data); on failure, it returns
327 -1 if the command was invalid, or -2 if a timeout occurred.
328
329 BusLogic_Command is called exclusively during host adapter detection and
330 initialization, so performance and latency are not critical, and exclusive
331 access to the Host Adapter hardware is assumed. Once the host adapter and
332 driver are initialized, the only Host Adapter command that is issued is the
333 single byte Execute Mailbox Command operation code, which does not require
334 waiting for the Host Adapter Ready bit to be set in the Status Register.
335*/
336
337static int BusLogic_Command(struct BusLogic_HostAdapter *HostAdapter, enum BusLogic_OperationCode OperationCode, void *ParameterData, int ParameterLength, void *ReplyData, int ReplyLength)
338{
339 unsigned char *ParameterPointer = (unsigned char *) ParameterData;
340 unsigned char *ReplyPointer = (unsigned char *) ReplyData;
341 union BusLogic_StatusRegister StatusRegister;
342 union BusLogic_InterruptRegister InterruptRegister;
343 unsigned long ProcessorFlags = 0;
344 int ReplyBytes = 0, Result;
345 long TimeoutCounter;
346 /*
347 Clear out the Reply Data if provided.
348 */
349 if (ReplyLength > 0)
350 memset(ReplyData, 0, ReplyLength);
351 /*
352 If the IRQ Channel has not yet been acquired, then interrupts must be
353 disabled while issuing host adapter commands since a Command Complete
354 interrupt could occur if the IRQ Channel was previously enabled by another
355 BusLogic Host Adapter or another driver sharing the same IRQ Channel.
356 */
357 if (!HostAdapter->IRQ_ChannelAcquired)
358 local_irq_save(ProcessorFlags);
359 /*
360 Wait for the Host Adapter Ready bit to be set and the Command/Parameter
361 Register Busy bit to be reset in the Status Register.
362 */
363 TimeoutCounter = 10000;
364 while (--TimeoutCounter >= 0) {
365 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
366 if (StatusRegister.sr.HostAdapterReady && !StatusRegister.sr.CommandParameterRegisterBusy)
367 break;
368 udelay(100);
369 }
370 if (TimeoutCounter < 0) {
371 BusLogic_CommandFailureReason = "Timeout waiting for Host Adapter Ready";
372 Result = -2;
373 goto Done;
374 }
375 /*
376 Write the OperationCode to the Command/Parameter Register.
377 */
378 HostAdapter->HostAdapterCommandCompleted = false;
379 BusLogic_WriteCommandParameterRegister(HostAdapter, OperationCode);
380 /*
381 Write any additional Parameter Bytes.
382 */
383 TimeoutCounter = 10000;
384 while (ParameterLength > 0 && --TimeoutCounter >= 0) {
385 /*
386 Wait 100 microseconds to give the Host Adapter enough time to determine
387 whether the last value written to the Command/Parameter Register was
388 valid or not. If the Command Complete bit is set in the Interrupt
389 Register, then the Command Invalid bit in the Status Register will be
390 reset if the Operation Code or Parameter was valid and the command
391 has completed, or set if the Operation Code or Parameter was invalid.
392 If the Data In Register Ready bit is set in the Status Register, then
393 the Operation Code was valid, and data is waiting to be read back
394 from the Host Adapter. Otherwise, wait for the Command/Parameter
395 Register Busy bit in the Status Register to be reset.
396 */
397 udelay(100);
398 InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
399 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
400 if (InterruptRegister.ir.CommandComplete)
401 break;
402 if (HostAdapter->HostAdapterCommandCompleted)
403 break;
404 if (StatusRegister.sr.DataInRegisterReady)
405 break;
406 if (StatusRegister.sr.CommandParameterRegisterBusy)
407 continue;
408 BusLogic_WriteCommandParameterRegister(HostAdapter, *ParameterPointer++);
409 ParameterLength--;
410 }
411 if (TimeoutCounter < 0) {
412 BusLogic_CommandFailureReason = "Timeout waiting for Parameter Acceptance";
413 Result = -2;
414 goto Done;
415 }
416 /*
417 The Modify I/O Address command does not cause a Command Complete Interrupt.
418 */
419 if (OperationCode == BusLogic_ModifyIOAddress) {
420 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
421 if (StatusRegister.sr.CommandInvalid) {
422 BusLogic_CommandFailureReason = "Modify I/O Address Invalid";
423 Result = -1;
424 goto Done;
425 }
426 if (BusLogic_GlobalOptions.TraceConfiguration)
427 BusLogic_Notice("BusLogic_Command(%02X) Status = %02X: " "(Modify I/O Address)\n", HostAdapter, OperationCode, StatusRegister.All);
428 Result = 0;
429 goto Done;
430 }
431 /*
432 Select an appropriate timeout value for awaiting command completion.
433 */
434 switch (OperationCode) {
435 case BusLogic_InquireInstalledDevicesID0to7:
436 case BusLogic_InquireInstalledDevicesID8to15:
437 case BusLogic_InquireTargetDevices:
438 /* Approximately 60 seconds. */
439 TimeoutCounter = 60 * 10000;
440 break;
441 default:
442 /* Approximately 1 second. */
443 TimeoutCounter = 10000;
444 break;
445 }
446 /*
447 Receive any Reply Bytes, waiting for either the Command Complete bit to
448 be set in the Interrupt Register, or for the Interrupt Handler to set the
449 Host Adapter Command Completed bit in the Host Adapter structure.
450 */
451 while (--TimeoutCounter >= 0) {
452 InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
453 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
454 if (InterruptRegister.ir.CommandComplete)
455 break;
456 if (HostAdapter->HostAdapterCommandCompleted)
457 break;
458 if (StatusRegister.sr.DataInRegisterReady) {
459 if (++ReplyBytes <= ReplyLength)
460 *ReplyPointer++ = BusLogic_ReadDataInRegister(HostAdapter);
461 else
462 BusLogic_ReadDataInRegister(HostAdapter);
463 }
464 if (OperationCode == BusLogic_FetchHostAdapterLocalRAM && StatusRegister.sr.HostAdapterReady)
465 break;
466 udelay(100);
467 }
468 if (TimeoutCounter < 0) {
469 BusLogic_CommandFailureReason = "Timeout waiting for Command Complete";
470 Result = -2;
471 goto Done;
472 }
473 /*
474 Clear any pending Command Complete Interrupt.
475 */
476 BusLogic_InterruptReset(HostAdapter);
477 /*
478 Provide tracing information if requested.
479 */
480 if (BusLogic_GlobalOptions.TraceConfiguration) {
481 int i;
482 BusLogic_Notice("BusLogic_Command(%02X) Status = %02X: %2d ==> %2d:", HostAdapter, OperationCode, StatusRegister.All, ReplyLength, ReplyBytes);
483 if (ReplyLength > ReplyBytes)
484 ReplyLength = ReplyBytes;
485 for (i = 0; i < ReplyLength; i++)
486 BusLogic_Notice(" %02X", HostAdapter, ((unsigned char *) ReplyData)[i]);
487 BusLogic_Notice("\n", HostAdapter);
488 }
489 /*
490 Process Command Invalid conditions.
491 */
492 if (StatusRegister.sr.CommandInvalid) {
493 /*
494 Some early BusLogic Host Adapters may not recover properly from
495 a Command Invalid condition, so if this appears to be the case,
496 a Soft Reset is issued to the Host Adapter. Potentially invalid
497 commands are never attempted after Mailbox Initialization is
498 performed, so there should be no Host Adapter state lost by a
499 Soft Reset in response to a Command Invalid condition.
500 */
501 udelay(1000);
502 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
503 if (StatusRegister.sr.CommandInvalid ||
504 StatusRegister.sr.Reserved ||
505 StatusRegister.sr.DataInRegisterReady ||
506 StatusRegister.sr.CommandParameterRegisterBusy || !StatusRegister.sr.HostAdapterReady || !StatusRegister.sr.InitializationRequired || StatusRegister.sr.DiagnosticActive || StatusRegister.sr.DiagnosticFailure) {
507 BusLogic_SoftReset(HostAdapter);
508 udelay(1000);
509 }
510 BusLogic_CommandFailureReason = "Command Invalid";
511 Result = -1;
512 goto Done;
513 }
514 /*
515 Handle Excess Parameters Supplied conditions.
516 */
517 if (ParameterLength > 0) {
518 BusLogic_CommandFailureReason = "Excess Parameters Supplied";
519 Result = -1;
520 goto Done;
521 }
522 /*
523 Indicate the command completed successfully.
524 */
525 BusLogic_CommandFailureReason = NULL;
526 Result = ReplyBytes;
527 /*
528 Restore the interrupt status if necessary and return.
529 */
530 Done:
531 if (!HostAdapter->IRQ_ChannelAcquired)
532 local_irq_restore(ProcessorFlags);
533 return Result;
534}
535
536
537/*
538 BusLogic_AppendProbeAddressISA appends a single ISA I/O Address to the list
539 of I/O Address and Bus Probe Information to be checked for potential BusLogic
540 Host Adapters.
541*/
542
543static void __init BusLogic_AppendProbeAddressISA(unsigned long IO_Address)
544{
545 struct BusLogic_ProbeInfo *ProbeInfo;
546 if (BusLogic_ProbeInfoCount >= BusLogic_MaxHostAdapters)
547 return;
548 ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++];
549 ProbeInfo->HostAdapterType = BusLogic_MultiMaster;
550 ProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus;
551 ProbeInfo->IO_Address = IO_Address;
552 ProbeInfo->PCI_Device = NULL;
553}
554
555
556/*
557 BusLogic_InitializeProbeInfoListISA initializes the list of I/O Address and
558 Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters
559 only from the list of standard BusLogic MultiMaster ISA I/O Addresses.
560*/
561
562static void __init BusLogic_InitializeProbeInfoListISA(struct BusLogic_HostAdapter
563 *PrototypeHostAdapter)
564{
565 /*
566 If BusLogic Driver Options specifications requested that ISA Bus Probes
567 be inhibited, do not proceed further.
568 */
569 if (BusLogic_ProbeOptions.NoProbeISA)
570 return;
571 /*
572 Append the list of standard BusLogic MultiMaster ISA I/O Addresses.
573 */
574 if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe330)
575 BusLogic_AppendProbeAddressISA(0x330);
576 if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe334)
577 BusLogic_AppendProbeAddressISA(0x334);
578 if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe230)
579 BusLogic_AppendProbeAddressISA(0x230);
580 if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe234)
581 BusLogic_AppendProbeAddressISA(0x234);
582 if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe130)
583 BusLogic_AppendProbeAddressISA(0x130);
584 if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe134)
585 BusLogic_AppendProbeAddressISA(0x134);
586}
587
588
589#ifdef CONFIG_PCI
590
591
592/*
593 BusLogic_SortProbeInfo sorts a section of BusLogic_ProbeInfoList in order
594 of increasing PCI Bus and Device Number.
595*/
596
597static void __init BusLogic_SortProbeInfo(struct BusLogic_ProbeInfo *ProbeInfoList, int ProbeInfoCount)
598{
599 int LastInterchange = ProbeInfoCount - 1, Bound, j;
600 while (LastInterchange > 0) {
601 Bound = LastInterchange;
602 LastInterchange = 0;
603 for (j = 0; j < Bound; j++) {
604 struct BusLogic_ProbeInfo *ProbeInfo1 = &ProbeInfoList[j];
605 struct BusLogic_ProbeInfo *ProbeInfo2 = &ProbeInfoList[j + 1];
606 if (ProbeInfo1->Bus > ProbeInfo2->Bus || (ProbeInfo1->Bus == ProbeInfo2->Bus && (ProbeInfo1->Device > ProbeInfo2->Device))) {
607 struct BusLogic_ProbeInfo TempProbeInfo;
608 memcpy(&TempProbeInfo, ProbeInfo1, sizeof(struct BusLogic_ProbeInfo));
609 memcpy(ProbeInfo1, ProbeInfo2, sizeof(struct BusLogic_ProbeInfo));
610 memcpy(ProbeInfo2, &TempProbeInfo, sizeof(struct BusLogic_ProbeInfo));
611 LastInterchange = j;
612 }
613 }
614 }
615}
616
617
618/*
619 BusLogic_InitializeMultiMasterProbeInfo initializes the list of I/O Address
620 and Bus Probe Information to be checked for potential BusLogic MultiMaster
621 SCSI Host Adapters by interrogating the PCI Configuration Space on PCI
622 machines as well as from the list of standard BusLogic MultiMaster ISA
623 I/O Addresses. It returns the number of PCI MultiMaster Host Adapters found.
624*/
625
626static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAdapter
627 *PrototypeHostAdapter)
628{
629 struct BusLogic_ProbeInfo *PrimaryProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount];
630 int NonPrimaryPCIMultiMasterIndex = BusLogic_ProbeInfoCount + 1;
631 int NonPrimaryPCIMultiMasterCount = 0, PCIMultiMasterCount = 0;
632 bool ForceBusDeviceScanningOrder = false;
633 bool ForceBusDeviceScanningOrderChecked = false;
634 bool StandardAddressSeen[6];
635 struct pci_dev *PCI_Device = NULL;
636 int i;
637 if (BusLogic_ProbeInfoCount >= BusLogic_MaxHostAdapters)
638 return 0;
639 BusLogic_ProbeInfoCount++;
640 for (i = 0; i < 6; i++)
641 StandardAddressSeen[i] = false;
642 /*
643 Iterate over the MultiMaster PCI Host Adapters. For each enumerated host
644 adapter, determine whether its ISA Compatible I/O Port is enabled and if
645 so, whether it is assigned the Primary I/O Address. A host adapter that is
646 assigned the Primary I/O Address will always be the preferred boot device.
647 The MultiMaster BIOS will first recognize a host adapter at the Primary I/O
648 Address, then any other PCI host adapters, and finally any host adapters
649 located at the remaining standard ISA I/O Addresses. When a PCI host
650 adapter is found with its ISA Compatible I/O Port enabled, a command is
651 issued to disable the ISA Compatible I/O Port, and it is noted that the
652 particular standard ISA I/O Address need not be probed.
653 */
654 PrimaryProbeInfo->IO_Address = 0;
655 while ((PCI_Device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, PCI_Device)) != NULL) {
656 struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter;
657 struct BusLogic_PCIHostAdapterInformation PCIHostAdapterInformation;
658 enum BusLogic_ISACompatibleIOPort ModifyIOAddressRequest;
659 unsigned char Bus;
660 unsigned char Device;
661 unsigned int IRQ_Channel;
662 unsigned long BaseAddress0;
663 unsigned long BaseAddress1;
664 unsigned long IO_Address;
665 unsigned long PCI_Address;
666
667 if (pci_enable_device(PCI_Device))
668 continue;
669
670 if (pci_set_dma_mask(PCI_Device, DMA_BIT_MASK(32) ))
671 continue;
672
673 Bus = PCI_Device->bus->number;
674 Device = PCI_Device->devfn >> 3;
675 IRQ_Channel = PCI_Device->irq;
676 IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0);
677 PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1);
678
679 if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM) {
680 BusLogic_Error("BusLogic: Base Address0 0x%X not I/O for " "MultiMaster Host Adapter\n", NULL, BaseAddress0);
681 BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
682 continue;
683 }
684 if (pci_resource_flags(PCI_Device, 1) & IORESOURCE_IO) {
685 BusLogic_Error("BusLogic: Base Address1 0x%X not Memory for " "MultiMaster Host Adapter\n", NULL, BaseAddress1);
686 BusLogic_Error("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, Bus, Device, PCI_Address);
687 continue;
688 }
689 if (IRQ_Channel == 0) {
690 BusLogic_Error("BusLogic: IRQ Channel %d invalid for " "MultiMaster Host Adapter\n", NULL, IRQ_Channel);
691 BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
692 continue;
693 }
694 if (BusLogic_GlobalOptions.TraceProbe) {
695 BusLogic_Notice("BusLogic: PCI MultiMaster Host Adapter " "detected at\n", NULL);
696 BusLogic_Notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, Bus, Device, IO_Address, PCI_Address);
697 }
698 /*
699 Issue the Inquire PCI Host Adapter Information command to determine
700 the ISA Compatible I/O Port. If the ISA Compatible I/O Port is
701 known and enabled, note that the particular Standard ISA I/O
702 Address should not be probed.
703 */
704 HostAdapter->IO_Address = IO_Address;
705 BusLogic_InterruptReset(HostAdapter);
706 if (BusLogic_Command(HostAdapter, BusLogic_InquirePCIHostAdapterInformation, NULL, 0, &PCIHostAdapterInformation, sizeof(PCIHostAdapterInformation))
707 == sizeof(PCIHostAdapterInformation)) {
708 if (PCIHostAdapterInformation.ISACompatibleIOPort < 6)
709 StandardAddressSeen[PCIHostAdapterInformation.ISACompatibleIOPort] = true;
710 } else
711 PCIHostAdapterInformation.ISACompatibleIOPort = BusLogic_IO_Disable;
712 /*
713 * Issue the Modify I/O Address command to disable the ISA Compatible
714 * I/O Port. On PCI Host Adapters, the Modify I/O Address command
715 * allows modification of the ISA compatible I/O Address that the Host
716 * Adapter responds to; it does not affect the PCI compliant I/O Address
717 * assigned at system initialization.
718 */
719 ModifyIOAddressRequest = BusLogic_IO_Disable;
720 BusLogic_Command(HostAdapter, BusLogic_ModifyIOAddress, &ModifyIOAddressRequest, sizeof(ModifyIOAddressRequest), NULL, 0);
721 /*
722 For the first MultiMaster Host Adapter enumerated, issue the Fetch
723 Host Adapter Local RAM command to read byte 45 of the AutoSCSI area,
724 for the setting of the "Use Bus And Device # For PCI Scanning Seq."
725 option. Issue the Inquire Board ID command since this option is
726 only valid for the BT-948/958/958D.
727 */
728 if (!ForceBusDeviceScanningOrderChecked) {
729 struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest;
730 struct BusLogic_AutoSCSIByte45 AutoSCSIByte45;
731 struct BusLogic_BoardID BoardID;
732 FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_AutoSCSI_BaseOffset + 45;
733 FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(AutoSCSIByte45);
734 BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &AutoSCSIByte45, sizeof(AutoSCSIByte45));
735 BusLogic_Command(HostAdapter, BusLogic_InquireBoardID, NULL, 0, &BoardID, sizeof(BoardID));
736 if (BoardID.FirmwareVersion1stDigit == '5')
737 ForceBusDeviceScanningOrder = AutoSCSIByte45.ForceBusDeviceScanningOrder;
738 ForceBusDeviceScanningOrderChecked = true;
739 }
740 /*
741 Determine whether this MultiMaster Host Adapter has its ISA
742 Compatible I/O Port enabled and is assigned the Primary I/O Address.
743 If it does, then it is the Primary MultiMaster Host Adapter and must
744 be recognized first. If it does not, then it is added to the list
745 for probing after any Primary MultiMaster Host Adapter is probed.
746 */
747 if (PCIHostAdapterInformation.ISACompatibleIOPort == BusLogic_IO_330) {
748 PrimaryProbeInfo->HostAdapterType = BusLogic_MultiMaster;
749 PrimaryProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
750 PrimaryProbeInfo->IO_Address = IO_Address;
751 PrimaryProbeInfo->PCI_Address = PCI_Address;
752 PrimaryProbeInfo->Bus = Bus;
753 PrimaryProbeInfo->Device = Device;
754 PrimaryProbeInfo->IRQ_Channel = IRQ_Channel;
755 PrimaryProbeInfo->PCI_Device = pci_dev_get(PCI_Device);
756 PCIMultiMasterCount++;
757 } else if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters) {
758 struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++];
759 ProbeInfo->HostAdapterType = BusLogic_MultiMaster;
760 ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
761 ProbeInfo->IO_Address = IO_Address;
762 ProbeInfo->PCI_Address = PCI_Address;
763 ProbeInfo->Bus = Bus;
764 ProbeInfo->Device = Device;
765 ProbeInfo->IRQ_Channel = IRQ_Channel;
766 ProbeInfo->PCI_Device = pci_dev_get(PCI_Device);
767 NonPrimaryPCIMultiMasterCount++;
768 PCIMultiMasterCount++;
769 } else
770 BusLogic_Warning("BusLogic: Too many Host Adapters " "detected\n", NULL);
771 }
772 /*
773 If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option is ON
774 for the first enumerated MultiMaster Host Adapter, and if that host adapter
775 is a BT-948/958/958D, then the MultiMaster BIOS will recognize MultiMaster
776 Host Adapters in the order of increasing PCI Bus and Device Number. In
777 that case, sort the probe information into the same order the BIOS uses.
778 If this option is OFF, then the MultiMaster BIOS will recognize MultiMaster
779 Host Adapters in the order they are enumerated by the PCI BIOS, and hence
780 no sorting is necessary.
781 */
782 if (ForceBusDeviceScanningOrder)
783 BusLogic_SortProbeInfo(&BusLogic_ProbeInfoList[NonPrimaryPCIMultiMasterIndex], NonPrimaryPCIMultiMasterCount);
784 /*
785 If no PCI MultiMaster Host Adapter is assigned the Primary I/O Address,
786 then the Primary I/O Address must be probed explicitly before any PCI
787 host adapters are probed.
788 */
789 if (!BusLogic_ProbeOptions.NoProbeISA)
790 if (PrimaryProbeInfo->IO_Address == 0 &&
791 (!BusLogic_ProbeOptions.LimitedProbeISA ||
792 BusLogic_ProbeOptions.Probe330)) {
793 PrimaryProbeInfo->HostAdapterType = BusLogic_MultiMaster;
794 PrimaryProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus;
795 PrimaryProbeInfo->IO_Address = 0x330;
796 }
797 /*
798 Append the list of standard BusLogic MultiMaster ISA I/O Addresses,
799 omitting the Primary I/O Address which has already been handled.
800 */
801 if (!BusLogic_ProbeOptions.NoProbeISA) {
802 if (!StandardAddressSeen[1] &&
803 (!BusLogic_ProbeOptions.LimitedProbeISA ||
804 BusLogic_ProbeOptions.Probe334))
805 BusLogic_AppendProbeAddressISA(0x334);
806 if (!StandardAddressSeen[2] &&
807 (!BusLogic_ProbeOptions.LimitedProbeISA ||
808 BusLogic_ProbeOptions.Probe230))
809 BusLogic_AppendProbeAddressISA(0x230);
810 if (!StandardAddressSeen[3] &&
811 (!BusLogic_ProbeOptions.LimitedProbeISA ||
812 BusLogic_ProbeOptions.Probe234))
813 BusLogic_AppendProbeAddressISA(0x234);
814 if (!StandardAddressSeen[4] &&
815 (!BusLogic_ProbeOptions.LimitedProbeISA ||
816 BusLogic_ProbeOptions.Probe130))
817 BusLogic_AppendProbeAddressISA(0x130);
818 if (!StandardAddressSeen[5] &&
819 (!BusLogic_ProbeOptions.LimitedProbeISA ||
820 BusLogic_ProbeOptions.Probe134))
821 BusLogic_AppendProbeAddressISA(0x134);
822 }
823 /*
824 Iterate over the older non-compliant MultiMaster PCI Host Adapters,
825 noting the PCI bus location and assigned IRQ Channel.
826 */
827 PCI_Device = NULL;
828 while ((PCI_Device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, PCI_Device)) != NULL) {
829 unsigned char Bus;
830 unsigned char Device;
831 unsigned int IRQ_Channel;
832 unsigned long IO_Address;
833
834 if (pci_enable_device(PCI_Device))
835 continue;
836
837 if (pci_set_dma_mask(PCI_Device, DMA_BIT_MASK(32)))
838 continue;
839
840 Bus = PCI_Device->bus->number;
841 Device = PCI_Device->devfn >> 3;
842 IRQ_Channel = PCI_Device->irq;
843 IO_Address = pci_resource_start(PCI_Device, 0);
844
845 if (IO_Address == 0 || IRQ_Channel == 0)
846 continue;
847 for (i = 0; i < BusLogic_ProbeInfoCount; i++) {
848 struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[i];
849 if (ProbeInfo->IO_Address == IO_Address && ProbeInfo->HostAdapterType == BusLogic_MultiMaster) {
850 ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
851 ProbeInfo->PCI_Address = 0;
852 ProbeInfo->Bus = Bus;
853 ProbeInfo->Device = Device;
854 ProbeInfo->IRQ_Channel = IRQ_Channel;
855 ProbeInfo->PCI_Device = pci_dev_get(PCI_Device);
856 break;
857 }
858 }
859 }
860 return PCIMultiMasterCount;
861}
862
863
864/*
865 BusLogic_InitializeFlashPointProbeInfo initializes the list of I/O Address
866 and Bus Probe Information to be checked for potential BusLogic FlashPoint
867 Host Adapters by interrogating the PCI Configuration Space. It returns the
868 number of FlashPoint Host Adapters found.
869*/
870
871static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAdapter
872 *PrototypeHostAdapter)
873{
874 int FlashPointIndex = BusLogic_ProbeInfoCount, FlashPointCount = 0;
875 struct pci_dev *PCI_Device = NULL;
876 /*
877 Interrogate PCI Configuration Space for any FlashPoint Host Adapters.
878 */
879 while ((PCI_Device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, PCI_Device)) != NULL) {
880 unsigned char Bus;
881 unsigned char Device;
882 unsigned int IRQ_Channel;
883 unsigned long BaseAddress0;
884 unsigned long BaseAddress1;
885 unsigned long IO_Address;
886 unsigned long PCI_Address;
887
888 if (pci_enable_device(PCI_Device))
889 continue;
890
891 if (pci_set_dma_mask(PCI_Device, DMA_BIT_MASK(32)))
892 continue;
893
894 Bus = PCI_Device->bus->number;
895 Device = PCI_Device->devfn >> 3;
896 IRQ_Channel = PCI_Device->irq;
897 IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0);
898 PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1);
899#ifdef CONFIG_SCSI_FLASHPOINT
900 if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM) {
901 BusLogic_Error("BusLogic: Base Address0 0x%X not I/O for " "FlashPoint Host Adapter\n", NULL, BaseAddress0);
902 BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
903 continue;
904 }
905 if (pci_resource_flags(PCI_Device, 1) & IORESOURCE_IO) {
906 BusLogic_Error("BusLogic: Base Address1 0x%X not Memory for " "FlashPoint Host Adapter\n", NULL, BaseAddress1);
907 BusLogic_Error("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, Bus, Device, PCI_Address);
908 continue;
909 }
910 if (IRQ_Channel == 0) {
911 BusLogic_Error("BusLogic: IRQ Channel %d invalid for " "FlashPoint Host Adapter\n", NULL, IRQ_Channel);
912 BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
913 continue;
914 }
915 if (BusLogic_GlobalOptions.TraceProbe) {
916 BusLogic_Notice("BusLogic: FlashPoint Host Adapter " "detected at\n", NULL);
917 BusLogic_Notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, Bus, Device, IO_Address, PCI_Address);
918 }
919 if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters) {
920 struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++];
921 ProbeInfo->HostAdapterType = BusLogic_FlashPoint;
922 ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
923 ProbeInfo->IO_Address = IO_Address;
924 ProbeInfo->PCI_Address = PCI_Address;
925 ProbeInfo->Bus = Bus;
926 ProbeInfo->Device = Device;
927 ProbeInfo->IRQ_Channel = IRQ_Channel;
928 ProbeInfo->PCI_Device = pci_dev_get(PCI_Device);
929 FlashPointCount++;
930 } else
931 BusLogic_Warning("BusLogic: Too many Host Adapters " "detected\n", NULL);
932#else
933 BusLogic_Error("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", NULL, Bus, Device);
934 BusLogic_Error("BusLogic: I/O Address 0x%X PCI Address 0x%X, irq %d, " "but FlashPoint\n", NULL, IO_Address, PCI_Address, IRQ_Channel);
935 BusLogic_Error("BusLogic: support was omitted in this kernel " "configuration.\n", NULL);
936#endif
937 }
938 /*
939 The FlashPoint BIOS will scan for FlashPoint Host Adapters in the order of
940 increasing PCI Bus and Device Number, so sort the probe information into
941 the same order the BIOS uses.
942 */
943 BusLogic_SortProbeInfo(&BusLogic_ProbeInfoList[FlashPointIndex], FlashPointCount);
944 return FlashPointCount;
945}
946
947
948/*
949 BusLogic_InitializeProbeInfoList initializes the list of I/O Address and Bus
950 Probe Information to be checked for potential BusLogic SCSI Host Adapters by
951 interrogating the PCI Configuration Space on PCI machines as well as from the
952 list of standard BusLogic MultiMaster ISA I/O Addresses. By default, if both
953 FlashPoint and PCI MultiMaster Host Adapters are present, this driver will
954 probe for FlashPoint Host Adapters first unless the BIOS primary disk is
955 controlled by the first PCI MultiMaster Host Adapter, in which case
956 MultiMaster Host Adapters will be probed first. The BusLogic Driver Options
957 specifications "MultiMasterFirst" and "FlashPointFirst" can be used to force
958 a particular probe order.
959*/
960
961static void __init BusLogic_InitializeProbeInfoList(struct BusLogic_HostAdapter
962 *PrototypeHostAdapter)
963{
964 /*
965 If a PCI BIOS is present, interrogate it for MultiMaster and FlashPoint
966 Host Adapters; otherwise, default to the standard ISA MultiMaster probe.
967 */
968 if (!BusLogic_ProbeOptions.NoProbePCI) {
969 if (BusLogic_ProbeOptions.MultiMasterFirst) {
970 BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter);
971 BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter);
972 } else if (BusLogic_ProbeOptions.FlashPointFirst) {
973 BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter);
974 BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter);
975 } else {
976 int FlashPointCount = BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter);
977 int PCIMultiMasterCount = BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter);
978 if (FlashPointCount > 0 && PCIMultiMasterCount > 0) {
979 struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[FlashPointCount];
980 struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter;
981 struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest;
982 struct BusLogic_BIOSDriveMapByte Drive0MapByte;
983 while (ProbeInfo->HostAdapterBusType != BusLogic_PCI_Bus)
984 ProbeInfo++;
985 HostAdapter->IO_Address = ProbeInfo->IO_Address;
986 FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_BIOS_BaseOffset + BusLogic_BIOS_DriveMapOffset + 0;
987 FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(Drive0MapByte);
988 BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &Drive0MapByte, sizeof(Drive0MapByte));
989 /*
990 If the Map Byte for BIOS Drive 0 indicates that BIOS Drive 0
991 is controlled by this PCI MultiMaster Host Adapter, then
992 reverse the probe order so that MultiMaster Host Adapters are
993 probed before FlashPoint Host Adapters.
994 */
995 if (Drive0MapByte.DiskGeometry != BusLogic_BIOS_Disk_Not_Installed) {
996 struct BusLogic_ProbeInfo SavedProbeInfo[BusLogic_MaxHostAdapters];
997 int MultiMasterCount = BusLogic_ProbeInfoCount - FlashPointCount;
998 memcpy(SavedProbeInfo, BusLogic_ProbeInfoList, BusLogic_ProbeInfoCount * sizeof(struct BusLogic_ProbeInfo));
999 memcpy(&BusLogic_ProbeInfoList[0], &SavedProbeInfo[FlashPointCount], MultiMasterCount * sizeof(struct BusLogic_ProbeInfo));
1000 memcpy(&BusLogic_ProbeInfoList[MultiMasterCount], &SavedProbeInfo[0], FlashPointCount * sizeof(struct BusLogic_ProbeInfo));
1001 }
1002 }
1003 }
1004 } else
1005 BusLogic_InitializeProbeInfoListISA(PrototypeHostAdapter);
1006}
1007
1008
1009#else
1010#define BusLogic_InitializeProbeInfoList(adapter) \
1011 BusLogic_InitializeProbeInfoListISA(adapter)
1012#endif /* CONFIG_PCI */
1013
1014
1015/*
1016 BusLogic_Failure prints a standardized error message, and then returns false.
1017*/
1018
1019static bool BusLogic_Failure(struct BusLogic_HostAdapter *HostAdapter, char *ErrorMessage)
1020{
1021 BusLogic_AnnounceDriver(HostAdapter);
1022 if (HostAdapter->HostAdapterBusType == BusLogic_PCI_Bus) {
1023 BusLogic_Error("While configuring BusLogic PCI Host Adapter at\n", HostAdapter);
1024 BusLogic_Error("Bus %d Device %d I/O Address 0x%X PCI Address 0x%X:\n", HostAdapter, HostAdapter->Bus, HostAdapter->Device, HostAdapter->IO_Address, HostAdapter->PCI_Address);
1025 } else
1026 BusLogic_Error("While configuring BusLogic Host Adapter at " "I/O Address 0x%X:\n", HostAdapter, HostAdapter->IO_Address);
1027 BusLogic_Error("%s FAILED - DETACHING\n", HostAdapter, ErrorMessage);
1028 if (BusLogic_CommandFailureReason != NULL)
1029 BusLogic_Error("ADDITIONAL FAILURE INFO - %s\n", HostAdapter, BusLogic_CommandFailureReason);
1030 return false;
1031}
1032
1033
1034/*
1035 BusLogic_ProbeHostAdapter probes for a BusLogic Host Adapter.
1036*/
1037
1038static bool __init BusLogic_ProbeHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
1039{
1040 union BusLogic_StatusRegister StatusRegister;
1041 union BusLogic_InterruptRegister InterruptRegister;
1042 union BusLogic_GeometryRegister GeometryRegister;
1043 /*
1044 FlashPoint Host Adapters are Probed by the FlashPoint SCCB Manager.
1045 */
1046 if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
1047 struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo;
1048 FlashPointInfo->BaseAddress = (u32) HostAdapter->IO_Address;
1049 FlashPointInfo->IRQ_Channel = HostAdapter->IRQ_Channel;
1050 FlashPointInfo->Present = false;
1051 if (!(FlashPoint_ProbeHostAdapter(FlashPointInfo) == 0 && FlashPointInfo->Present)) {
1052 BusLogic_Error("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", HostAdapter, HostAdapter->Bus, HostAdapter->Device);
1053 BusLogic_Error("BusLogic: I/O Address 0x%X PCI Address 0x%X, " "but FlashPoint\n", HostAdapter, HostAdapter->IO_Address, HostAdapter->PCI_Address);
1054 BusLogic_Error("BusLogic: Probe Function failed to validate it.\n", HostAdapter);
1055 return false;
1056 }
1057 if (BusLogic_GlobalOptions.TraceProbe)
1058 BusLogic_Notice("BusLogic_Probe(0x%X): FlashPoint Found\n", HostAdapter, HostAdapter->IO_Address);
1059 /*
1060 Indicate the Host Adapter Probe completed successfully.
1061 */
1062 return true;
1063 }
1064 /*
1065 Read the Status, Interrupt, and Geometry Registers to test if there are I/O
1066 ports that respond, and to check the values to determine if they are from a
1067 BusLogic Host Adapter. A nonexistent I/O port will return 0xFF, in which
1068 case there is definitely no BusLogic Host Adapter at this base I/O Address.
1069 The test here is a subset of that used by the BusLogic Host Adapter BIOS.
1070 */
1071 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
1072 InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
1073 GeometryRegister.All = BusLogic_ReadGeometryRegister(HostAdapter);
1074 if (BusLogic_GlobalOptions.TraceProbe)
1075 BusLogic_Notice("BusLogic_Probe(0x%X): Status 0x%02X, Interrupt 0x%02X, " "Geometry 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All, InterruptRegister.All, GeometryRegister.All);
1076 if (StatusRegister.All == 0 || StatusRegister.sr.DiagnosticActive || StatusRegister.sr.CommandParameterRegisterBusy || StatusRegister.sr.Reserved || StatusRegister.sr.CommandInvalid || InterruptRegister.ir.Reserved != 0)
1077 return false;
1078 /*
1079 Check the undocumented Geometry Register to test if there is an I/O port
1080 that responded. Adaptec Host Adapters do not implement the Geometry
1081 Register, so this test helps serve to avoid incorrectly recognizing an
1082 Adaptec 1542A or 1542B as a BusLogic. Unfortunately, the Adaptec 1542C
1083 series does respond to the Geometry Register I/O port, but it will be
1084 rejected later when the Inquire Extended Setup Information command is
1085 issued in BusLogic_CheckHostAdapter. The AMI FastDisk Host Adapter is a
1086 BusLogic clone that implements the same interface as earlier BusLogic
1087 Host Adapters, including the undocumented commands, and is therefore
1088 supported by this driver. However, the AMI FastDisk always returns 0x00
1089 upon reading the Geometry Register, so the extended translation option
1090 should always be left disabled on the AMI FastDisk.
1091 */
1092 if (GeometryRegister.All == 0xFF)
1093 return false;
1094 /*
1095 Indicate the Host Adapter Probe completed successfully.
1096 */
1097 return true;
1098}
1099
1100
1101/*
1102 BusLogic_HardwareResetHostAdapter issues a Hardware Reset to the Host Adapter
1103 and waits for Host Adapter Diagnostics to complete. If HardReset is true, a
1104 Hard Reset is performed which also initiates a SCSI Bus Reset. Otherwise, a
1105 Soft Reset is performed which only resets the Host Adapter without forcing a
1106 SCSI Bus Reset.
1107*/
1108
1109static bool BusLogic_HardwareResetHostAdapter(struct BusLogic_HostAdapter
1110 *HostAdapter, bool HardReset)
1111{
1112 union BusLogic_StatusRegister StatusRegister;
1113 int TimeoutCounter;
1114 /*
1115 FlashPoint Host Adapters are Hard Reset by the FlashPoint SCCB Manager.
1116 */
1117 if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
1118 struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo;
1119 FlashPointInfo->HostSoftReset = !HardReset;
1120 FlashPointInfo->ReportDataUnderrun = true;
1121 HostAdapter->CardHandle = FlashPoint_HardwareResetHostAdapter(FlashPointInfo);
1122 if (HostAdapter->CardHandle == FlashPoint_BadCardHandle)
1123 return false;
1124 /*
1125 Indicate the Host Adapter Hard Reset completed successfully.
1126 */
1127 return true;
1128 }
1129 /*
1130 Issue a Hard Reset or Soft Reset Command to the Host Adapter. The Host
1131 Adapter should respond by setting Diagnostic Active in the Status Register.
1132 */
1133 if (HardReset)
1134 BusLogic_HardReset(HostAdapter);
1135 else
1136 BusLogic_SoftReset(HostAdapter);
1137 /*
1138 Wait until Diagnostic Active is set in the Status Register.
1139 */
1140 TimeoutCounter = 5 * 10000;
1141 while (--TimeoutCounter >= 0) {
1142 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
1143 if (StatusRegister.sr.DiagnosticActive)
1144 break;
1145 udelay(100);
1146 }
1147 if (BusLogic_GlobalOptions.TraceHardwareReset)
1148 BusLogic_Notice("BusLogic_HardwareReset(0x%X): Diagnostic Active, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All);
1149 if (TimeoutCounter < 0)
1150 return false;
1151 /*
1152 Wait 100 microseconds to allow completion of any initial diagnostic
1153 activity which might leave the contents of the Status Register
1154 unpredictable.
1155 */
1156 udelay(100);
1157 /*
1158 Wait until Diagnostic Active is reset in the Status Register.
1159 */
1160 TimeoutCounter = 10 * 10000;
1161 while (--TimeoutCounter >= 0) {
1162 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
1163 if (!StatusRegister.sr.DiagnosticActive)
1164 break;
1165 udelay(100);
1166 }
1167 if (BusLogic_GlobalOptions.TraceHardwareReset)
1168 BusLogic_Notice("BusLogic_HardwareReset(0x%X): Diagnostic Completed, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All);
1169 if (TimeoutCounter < 0)
1170 return false;
1171 /*
1172 Wait until at least one of the Diagnostic Failure, Host Adapter Ready,
1173 or Data In Register Ready bits is set in the Status Register.
1174 */
1175 TimeoutCounter = 10000;
1176 while (--TimeoutCounter >= 0) {
1177 StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
1178 if (StatusRegister.sr.DiagnosticFailure || StatusRegister.sr.HostAdapterReady || StatusRegister.sr.DataInRegisterReady)
1179 break;
1180 udelay(100);
1181 }
1182 if (BusLogic_GlobalOptions.TraceHardwareReset)
1183 BusLogic_Notice("BusLogic_HardwareReset(0x%X): Host Adapter Ready, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All);
1184 if (TimeoutCounter < 0)
1185 return false;
1186 /*
1187 If Diagnostic Failure is set or Host Adapter Ready is reset, then an
1188 error occurred during the Host Adapter diagnostics. If Data In Register
1189 Ready is set, then there is an Error Code available.
1190 */
1191 if (StatusRegister.sr.DiagnosticFailure || !StatusRegister.sr.HostAdapterReady) {
1192 BusLogic_CommandFailureReason = NULL;
1193 BusLogic_Failure(HostAdapter, "HARD RESET DIAGNOSTICS");
1194 BusLogic_Error("HOST ADAPTER STATUS REGISTER = %02X\n", HostAdapter, StatusRegister.All);
1195 if (StatusRegister.sr.DataInRegisterReady) {
1196 unsigned char ErrorCode = BusLogic_ReadDataInRegister(HostAdapter);
1197 BusLogic_Error("HOST ADAPTER ERROR CODE = %d\n", HostAdapter, ErrorCode);
1198 }
1199 return false;
1200 }
1201 /*
1202 Indicate the Host Adapter Hard Reset completed successfully.
1203 */
1204 return true;
1205}
1206
1207
1208/*
1209 BusLogic_CheckHostAdapter checks to be sure this really is a BusLogic
1210 Host Adapter.
1211*/
1212
1213static bool __init BusLogic_CheckHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
1214{
1215 struct BusLogic_ExtendedSetupInformation ExtendedSetupInformation;
1216 unsigned char RequestedReplyLength;
1217 bool Result = true;
1218 /*
1219 FlashPoint Host Adapters do not require this protection.
1220 */
1221 if (BusLogic_FlashPointHostAdapterP(HostAdapter))
1222 return true;
1223 /*
1224 Issue the Inquire Extended Setup Information command. Only genuine
1225 BusLogic Host Adapters and true clones support this command. Adaptec 1542C
1226 series Host Adapters that respond to the Geometry Register I/O port will
1227 fail this command.
1228 */
1229 RequestedReplyLength = sizeof(ExtendedSetupInformation);
1230 if (BusLogic_Command(HostAdapter, BusLogic_InquireExtendedSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &ExtendedSetupInformation, sizeof(ExtendedSetupInformation))
1231 != sizeof(ExtendedSetupInformation))
1232 Result = false;
1233 /*
1234 Provide tracing information if requested and return.
1235 */
1236 if (BusLogic_GlobalOptions.TraceProbe)
1237 BusLogic_Notice("BusLogic_Check(0x%X): MultiMaster %s\n", HostAdapter, HostAdapter->IO_Address, (Result ? "Found" : "Not Found"));
1238 return Result;
1239}
1240
1241
1242/*
1243 BusLogic_ReadHostAdapterConfiguration reads the Configuration Information
1244 from Host Adapter and initializes the Host Adapter structure.
1245*/
1246
1247static bool __init BusLogic_ReadHostAdapterConfiguration(struct BusLogic_HostAdapter
1248 *HostAdapter)
1249{
1250 struct BusLogic_BoardID BoardID;
1251 struct BusLogic_Configuration Configuration;
1252 struct BusLogic_SetupInformation SetupInformation;
1253 struct BusLogic_ExtendedSetupInformation ExtendedSetupInformation;
1254 unsigned char HostAdapterModelNumber[5];
1255 unsigned char FirmwareVersion3rdDigit;
1256 unsigned char FirmwareVersionLetter;
1257 struct BusLogic_PCIHostAdapterInformation PCIHostAdapterInformation;
1258 struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest;
1259 struct BusLogic_AutoSCSIData AutoSCSIData;
1260 union BusLogic_GeometryRegister GeometryRegister;
1261 unsigned char RequestedReplyLength;
1262 unsigned char *TargetPointer, Character;
1263 int TargetID, i;
1264 /*
1265 Configuration Information for FlashPoint Host Adapters is provided in the
1266 FlashPoint_Info structure by the FlashPoint SCCB Manager's Probe Function.
1267 Initialize fields in the Host Adapter structure from the FlashPoint_Info
1268 structure.
1269 */
1270 if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
1271 struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo;
1272 TargetPointer = HostAdapter->ModelName;
1273 *TargetPointer++ = 'B';
1274 *TargetPointer++ = 'T';
1275 *TargetPointer++ = '-';
1276 for (i = 0; i < sizeof(FlashPointInfo->ModelNumber); i++)
1277 *TargetPointer++ = FlashPointInfo->ModelNumber[i];
1278 *TargetPointer++ = '\0';
1279 strcpy(HostAdapter->FirmwareVersion, FlashPoint_FirmwareVersion);
1280 HostAdapter->SCSI_ID = FlashPointInfo->SCSI_ID;
1281 HostAdapter->ExtendedTranslationEnabled = FlashPointInfo->ExtendedTranslationEnabled;
1282 HostAdapter->ParityCheckingEnabled = FlashPointInfo->ParityCheckingEnabled;
1283 HostAdapter->BusResetEnabled = !FlashPointInfo->HostSoftReset;
1284 HostAdapter->LevelSensitiveInterrupt = true;
1285 HostAdapter->HostWideSCSI = FlashPointInfo->HostWideSCSI;
1286 HostAdapter->HostDifferentialSCSI = false;
1287 HostAdapter->HostSupportsSCAM = true;
1288 HostAdapter->HostUltraSCSI = true;
1289 HostAdapter->ExtendedLUNSupport = true;
1290 HostAdapter->TerminationInfoValid = true;
1291 HostAdapter->LowByteTerminated = FlashPointInfo->LowByteTerminated;
1292 HostAdapter->HighByteTerminated = FlashPointInfo->HighByteTerminated;
1293 HostAdapter->SCAM_Enabled = FlashPointInfo->SCAM_Enabled;
1294 HostAdapter->SCAM_Level2 = FlashPointInfo->SCAM_Level2;
1295 HostAdapter->DriverScatterGatherLimit = BusLogic_ScatterGatherLimit;
1296 HostAdapter->MaxTargetDevices = (HostAdapter->HostWideSCSI ? 16 : 8);
1297 HostAdapter->MaxLogicalUnits = 32;
1298 HostAdapter->InitialCCBs = 4 * BusLogic_CCB_AllocationGroupSize;
1299 HostAdapter->IncrementalCCBs = BusLogic_CCB_AllocationGroupSize;
1300 HostAdapter->DriverQueueDepth = 255;
1301 HostAdapter->HostAdapterQueueDepth = HostAdapter->DriverQueueDepth;
1302 HostAdapter->SynchronousPermitted = FlashPointInfo->SynchronousPermitted;
1303 HostAdapter->FastPermitted = FlashPointInfo->FastPermitted;
1304 HostAdapter->UltraPermitted = FlashPointInfo->UltraPermitted;
1305 HostAdapter->WidePermitted = FlashPointInfo->WidePermitted;
1306 HostAdapter->DisconnectPermitted = FlashPointInfo->DisconnectPermitted;
1307 HostAdapter->TaggedQueuingPermitted = 0xFFFF;
1308 goto Common;
1309 }
1310 /*
1311 Issue the Inquire Board ID command.
1312 */
1313 if (BusLogic_Command(HostAdapter, BusLogic_InquireBoardID, NULL, 0, &BoardID, sizeof(BoardID)) != sizeof(BoardID))
1314 return BusLogic_Failure(HostAdapter, "INQUIRE BOARD ID");
1315 /*
1316 Issue the Inquire Configuration command.
1317 */
1318 if (BusLogic_Command(HostAdapter, BusLogic_InquireConfiguration, NULL, 0, &Configuration, sizeof(Configuration))
1319 != sizeof(Configuration))
1320 return BusLogic_Failure(HostAdapter, "INQUIRE CONFIGURATION");
1321 /*
1322 Issue the Inquire Setup Information command.
1323 */
1324 RequestedReplyLength = sizeof(SetupInformation);
1325 if (BusLogic_Command(HostAdapter, BusLogic_InquireSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &SetupInformation, sizeof(SetupInformation))
1326 != sizeof(SetupInformation))
1327 return BusLogic_Failure(HostAdapter, "INQUIRE SETUP INFORMATION");
1328 /*
1329 Issue the Inquire Extended Setup Information command.
1330 */
1331 RequestedReplyLength = sizeof(ExtendedSetupInformation);
1332 if (BusLogic_Command(HostAdapter, BusLogic_InquireExtendedSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &ExtendedSetupInformation, sizeof(ExtendedSetupInformation))
1333 != sizeof(ExtendedSetupInformation))
1334 return BusLogic_Failure(HostAdapter, "INQUIRE EXTENDED SETUP INFORMATION");
1335 /*
1336 Issue the Inquire Firmware Version 3rd Digit command.
1337 */
1338 FirmwareVersion3rdDigit = '\0';
1339 if (BoardID.FirmwareVersion1stDigit > '0')
1340 if (BusLogic_Command(HostAdapter, BusLogic_InquireFirmwareVersion3rdDigit, NULL, 0, &FirmwareVersion3rdDigit, sizeof(FirmwareVersion3rdDigit))
1341 != sizeof(FirmwareVersion3rdDigit))
1342 return BusLogic_Failure(HostAdapter, "INQUIRE FIRMWARE 3RD DIGIT");
1343 /*
1344 Issue the Inquire Host Adapter Model Number command.
1345 */
1346 if (ExtendedSetupInformation.BusType == 'A' && BoardID.FirmwareVersion1stDigit == '2')
1347 /* BusLogic BT-542B ISA 2.xx */
1348 strcpy(HostAdapterModelNumber, "542B");
1349 else if (ExtendedSetupInformation.BusType == 'E' && BoardID.FirmwareVersion1stDigit == '2' && (BoardID.FirmwareVersion2ndDigit <= '1' || (BoardID.FirmwareVersion2ndDigit == '2' && FirmwareVersion3rdDigit == '0')))
1350 /* BusLogic BT-742A EISA 2.1x or 2.20 */
1351 strcpy(HostAdapterModelNumber, "742A");
1352 else if (ExtendedSetupInformation.BusType == 'E' && BoardID.FirmwareVersion1stDigit == '0')
1353 /* AMI FastDisk EISA Series 441 0.x */
1354 strcpy(HostAdapterModelNumber, "747A");
1355 else {
1356 RequestedReplyLength = sizeof(HostAdapterModelNumber);
1357 if (BusLogic_Command(HostAdapter, BusLogic_InquireHostAdapterModelNumber, &RequestedReplyLength, sizeof(RequestedReplyLength), &HostAdapterModelNumber, sizeof(HostAdapterModelNumber))
1358 != sizeof(HostAdapterModelNumber))
1359 return BusLogic_Failure(HostAdapter, "INQUIRE HOST ADAPTER MODEL NUMBER");
1360 }
1361 /*
1362 BusLogic MultiMaster Host Adapters can be identified by their model number
1363 and the major version number of their firmware as follows:
1364
1365 5.xx BusLogic "W" Series Host Adapters:
1366 BT-948/958/958D
1367 4.xx BusLogic "C" Series Host Adapters:
1368 BT-946C/956C/956CD/747C/757C/757CD/445C/545C/540CF
1369 3.xx BusLogic "S" Series Host Adapters:
1370 BT-747S/747D/757S/757D/445S/545S/542D
1371 BT-542B/742A (revision H)
1372 2.xx BusLogic "A" Series Host Adapters:
1373 BT-542B/742A (revision G and below)
1374 0.xx AMI FastDisk VLB/EISA BusLogic Clone Host Adapter
1375 */
1376 /*
1377 Save the Model Name and Host Adapter Name in the Host Adapter structure.
1378 */
1379 TargetPointer = HostAdapter->ModelName;
1380 *TargetPointer++ = 'B';
1381 *TargetPointer++ = 'T';
1382 *TargetPointer++ = '-';
1383 for (i = 0; i < sizeof(HostAdapterModelNumber); i++) {
1384 Character = HostAdapterModelNumber[i];
1385 if (Character == ' ' || Character == '\0')
1386 break;
1387 *TargetPointer++ = Character;
1388 }
1389 *TargetPointer++ = '\0';
1390 /*
1391 Save the Firmware Version in the Host Adapter structure.
1392 */
1393 TargetPointer = HostAdapter->FirmwareVersion;
1394 *TargetPointer++ = BoardID.FirmwareVersion1stDigit;
1395 *TargetPointer++ = '.';
1396 *TargetPointer++ = BoardID.FirmwareVersion2ndDigit;
1397 if (FirmwareVersion3rdDigit != ' ' && FirmwareVersion3rdDigit != '\0')
1398 *TargetPointer++ = FirmwareVersion3rdDigit;
1399 *TargetPointer = '\0';
1400 /*
1401 Issue the Inquire Firmware Version Letter command.
1402 */
1403 if (strcmp(HostAdapter->FirmwareVersion, "3.3") >= 0) {
1404 if (BusLogic_Command(HostAdapter, BusLogic_InquireFirmwareVersionLetter, NULL, 0, &FirmwareVersionLetter, sizeof(FirmwareVersionLetter))
1405 != sizeof(FirmwareVersionLetter))
1406 return BusLogic_Failure(HostAdapter, "INQUIRE FIRMWARE VERSION LETTER");
1407 if (FirmwareVersionLetter != ' ' && FirmwareVersionLetter != '\0')
1408 *TargetPointer++ = FirmwareVersionLetter;
1409 *TargetPointer = '\0';
1410 }
1411 /*
1412 Save the Host Adapter SCSI ID in the Host Adapter structure.
1413 */
1414 HostAdapter->SCSI_ID = Configuration.HostAdapterID;
1415 /*
1416 Determine the Bus Type and save it in the Host Adapter structure, determine
1417 and save the IRQ Channel if necessary, and determine and save the DMA
1418 Channel for ISA Host Adapters.
1419 */
1420 HostAdapter->HostAdapterBusType = BusLogic_HostAdapterBusTypes[HostAdapter->ModelName[3] - '4'];
1421 if (HostAdapter->IRQ_Channel == 0) {
1422 if (Configuration.IRQ_Channel9)
1423 HostAdapter->IRQ_Channel = 9;
1424 else if (Configuration.IRQ_Channel10)
1425 HostAdapter->IRQ_Channel = 10;
1426 else if (Configuration.IRQ_Channel11)
1427 HostAdapter->IRQ_Channel = 11;
1428 else if (Configuration.IRQ_Channel12)
1429 HostAdapter->IRQ_Channel = 12;
1430 else if (Configuration.IRQ_Channel14)
1431 HostAdapter->IRQ_Channel = 14;
1432 else if (Configuration.IRQ_Channel15)
1433 HostAdapter->IRQ_Channel = 15;
1434 }
1435 if (HostAdapter->HostAdapterBusType == BusLogic_ISA_Bus) {
1436 if (Configuration.DMA_Channel5)
1437 HostAdapter->DMA_Channel = 5;
1438 else if (Configuration.DMA_Channel6)
1439 HostAdapter->DMA_Channel = 6;
1440 else if (Configuration.DMA_Channel7)
1441 HostAdapter->DMA_Channel = 7;
1442 }
1443 /*
1444 Determine whether Extended Translation is enabled and save it in
1445 the Host Adapter structure.
1446 */
1447 GeometryRegister.All = BusLogic_ReadGeometryRegister(HostAdapter);
1448 HostAdapter->ExtendedTranslationEnabled = GeometryRegister.gr.ExtendedTranslationEnabled;
1449 /*
1450 Save the Scatter Gather Limits, Level Sensitive Interrupt flag, Wide
1451 SCSI flag, Differential SCSI flag, SCAM Supported flag, and
1452 Ultra SCSI flag in the Host Adapter structure.
1453 */
1454 HostAdapter->HostAdapterScatterGatherLimit = ExtendedSetupInformation.ScatterGatherLimit;
1455 HostAdapter->DriverScatterGatherLimit = HostAdapter->HostAdapterScatterGatherLimit;
1456 if (HostAdapter->HostAdapterScatterGatherLimit > BusLogic_ScatterGatherLimit)
1457 HostAdapter->DriverScatterGatherLimit = BusLogic_ScatterGatherLimit;
1458 if (ExtendedSetupInformation.Misc.LevelSensitiveInterrupt)
1459 HostAdapter->LevelSensitiveInterrupt = true;
1460 HostAdapter->HostWideSCSI = ExtendedSetupInformation.HostWideSCSI;
1461 HostAdapter->HostDifferentialSCSI = ExtendedSetupInformation.HostDifferentialSCSI;
1462 HostAdapter->HostSupportsSCAM = ExtendedSetupInformation.HostSupportsSCAM;
1463 HostAdapter->HostUltraSCSI = ExtendedSetupInformation.HostUltraSCSI;
1464 /*
1465 Determine whether Extended LUN Format CCBs are supported and save the
1466 information in the Host Adapter structure.
1467 */
1468 if (HostAdapter->FirmwareVersion[0] == '5' || (HostAdapter->FirmwareVersion[0] == '4' && HostAdapter->HostWideSCSI))
1469 HostAdapter->ExtendedLUNSupport = true;
1470 /*
1471 Issue the Inquire PCI Host Adapter Information command to read the
1472 Termination Information from "W" series MultiMaster Host Adapters.
1473 */
1474 if (HostAdapter->FirmwareVersion[0] == '5') {
1475 if (BusLogic_Command(HostAdapter, BusLogic_InquirePCIHostAdapterInformation, NULL, 0, &PCIHostAdapterInformation, sizeof(PCIHostAdapterInformation))
1476 != sizeof(PCIHostAdapterInformation))
1477 return BusLogic_Failure(HostAdapter, "INQUIRE PCI HOST ADAPTER INFORMATION");
1478 /*
1479 Save the Termination Information in the Host Adapter structure.
1480 */
1481 if (PCIHostAdapterInformation.GenericInfoValid) {
1482 HostAdapter->TerminationInfoValid = true;
1483 HostAdapter->LowByteTerminated = PCIHostAdapterInformation.LowByteTerminated;
1484 HostAdapter->HighByteTerminated = PCIHostAdapterInformation.HighByteTerminated;
1485 }
1486 }
1487 /*
1488 Issue the Fetch Host Adapter Local RAM command to read the AutoSCSI data
1489 from "W" and "C" series MultiMaster Host Adapters.
1490 */
1491 if (HostAdapter->FirmwareVersion[0] >= '4') {
1492 FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_AutoSCSI_BaseOffset;
1493 FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(AutoSCSIData);
1494 if (BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &AutoSCSIData, sizeof(AutoSCSIData))
1495 != sizeof(AutoSCSIData))
1496 return BusLogic_Failure(HostAdapter, "FETCH HOST ADAPTER LOCAL RAM");
1497 /*
1498 Save the Parity Checking Enabled, Bus Reset Enabled, and Termination
1499 Information in the Host Adapter structure.
1500 */
1501 HostAdapter->ParityCheckingEnabled = AutoSCSIData.ParityCheckingEnabled;
1502 HostAdapter->BusResetEnabled = AutoSCSIData.BusResetEnabled;
1503 if (HostAdapter->FirmwareVersion[0] == '4') {
1504 HostAdapter->TerminationInfoValid = true;
1505 HostAdapter->LowByteTerminated = AutoSCSIData.LowByteTerminated;
1506 HostAdapter->HighByteTerminated = AutoSCSIData.HighByteTerminated;
1507 }
1508 /*
1509 Save the Wide Permitted, Fast Permitted, Synchronous Permitted,
1510 Disconnect Permitted, Ultra Permitted, and SCAM Information in the
1511 Host Adapter structure.
1512 */
1513 HostAdapter->WidePermitted = AutoSCSIData.WidePermitted;
1514 HostAdapter->FastPermitted = AutoSCSIData.FastPermitted;
1515 HostAdapter->SynchronousPermitted = AutoSCSIData.SynchronousPermitted;
1516 HostAdapter->DisconnectPermitted = AutoSCSIData.DisconnectPermitted;
1517 if (HostAdapter->HostUltraSCSI)
1518 HostAdapter->UltraPermitted = AutoSCSIData.UltraPermitted;
1519 if (HostAdapter->HostSupportsSCAM) {
1520 HostAdapter->SCAM_Enabled = AutoSCSIData.SCAM_Enabled;
1521 HostAdapter->SCAM_Level2 = AutoSCSIData.SCAM_Level2;
1522 }
1523 }
1524 /*
1525 Initialize fields in the Host Adapter structure for "S" and "A" series
1526 MultiMaster Host Adapters.
1527 */
1528 if (HostAdapter->FirmwareVersion[0] < '4') {
1529 if (SetupInformation.SynchronousInitiationEnabled) {
1530 HostAdapter->SynchronousPermitted = 0xFF;
1531 if (HostAdapter->HostAdapterBusType == BusLogic_EISA_Bus) {
1532 if (ExtendedSetupInformation.Misc.FastOnEISA)
1533 HostAdapter->FastPermitted = 0xFF;
1534 if (strcmp(HostAdapter->ModelName, "BT-757") == 0)
1535 HostAdapter->WidePermitted = 0xFF;
1536 }
1537 }
1538 HostAdapter->DisconnectPermitted = 0xFF;
1539 HostAdapter->ParityCheckingEnabled = SetupInformation.ParityCheckingEnabled;
1540 HostAdapter->BusResetEnabled = true;
1541 }
1542 /*
1543 Determine the maximum number of Target IDs and Logical Units supported by
1544 this driver for Wide and Narrow Host Adapters.
1545 */
1546 HostAdapter->MaxTargetDevices = (HostAdapter->HostWideSCSI ? 16 : 8);
1547 HostAdapter->MaxLogicalUnits = (HostAdapter->ExtendedLUNSupport ? 32 : 8);
1548 /*
1549 Select appropriate values for the Mailbox Count, Driver Queue Depth,
1550 Initial CCBs, and Incremental CCBs variables based on whether or not Strict
1551 Round Robin Mode is supported. If Strict Round Robin Mode is supported,
1552 then there is no performance degradation in using the maximum possible
1553 number of Outgoing and Incoming Mailboxes and allowing the Tagged and
1554 Untagged Queue Depths to determine the actual utilization. If Strict Round
1555 Robin Mode is not supported, then the Host Adapter must scan all the
1556 Outgoing Mailboxes whenever an Outgoing Mailbox entry is made, which can
1557 cause a substantial performance penalty. The host adapters actually have
1558 room to store the following number of CCBs internally; that is, they can
1559 internally queue and manage this many active commands on the SCSI bus
1560 simultaneously. Performance measurements demonstrate that the Driver Queue
1561 Depth should be set to the Mailbox Count, rather than the Host Adapter
1562 Queue Depth (internal CCB capacity), as it is more efficient to have the
1563 queued commands waiting in Outgoing Mailboxes if necessary than to block
1564 the process in the higher levels of the SCSI Subsystem.
1565
1566 192 BT-948/958/958D
1567 100 BT-946C/956C/956CD/747C/757C/757CD/445C
1568 50 BT-545C/540CF
1569 30 BT-747S/747D/757S/757D/445S/545S/542D/542B/742A
1570 */
1571 if (HostAdapter->FirmwareVersion[0] == '5')
1572 HostAdapter->HostAdapterQueueDepth = 192;
1573 else if (HostAdapter->FirmwareVersion[0] == '4')
1574 HostAdapter->HostAdapterQueueDepth = (HostAdapter->HostAdapterBusType != BusLogic_ISA_Bus ? 100 : 50);
1575 else
1576 HostAdapter->HostAdapterQueueDepth = 30;
1577 if (strcmp(HostAdapter->FirmwareVersion, "3.31") >= 0) {
1578 HostAdapter->StrictRoundRobinModeSupport = true;
1579 HostAdapter->MailboxCount = BusLogic_MaxMailboxes;
1580 } else {
1581 HostAdapter->StrictRoundRobinModeSupport = false;
1582 HostAdapter->MailboxCount = 32;
1583 }
1584 HostAdapter->DriverQueueDepth = HostAdapter->MailboxCount;
1585 HostAdapter->InitialCCBs = 4 * BusLogic_CCB_AllocationGroupSize;
1586 HostAdapter->IncrementalCCBs = BusLogic_CCB_AllocationGroupSize;
1587 /*
1588 Tagged Queuing support is available and operates properly on all "W" series
1589 MultiMaster Host Adapters, on "C" series MultiMaster Host Adapters with
1590 firmware version 4.22 and above, and on "S" series MultiMaster Host
1591 Adapters with firmware version 3.35 and above.
1592 */
1593 HostAdapter->TaggedQueuingPermitted = 0;
1594 switch (HostAdapter->FirmwareVersion[0]) {
1595 case '5':
1596 HostAdapter->TaggedQueuingPermitted = 0xFFFF;
1597 break;
1598 case '4':
1599 if (strcmp(HostAdapter->FirmwareVersion, "4.22") >= 0)
1600 HostAdapter->TaggedQueuingPermitted = 0xFFFF;
1601 break;
1602 case '3':
1603 if (strcmp(HostAdapter->FirmwareVersion, "3.35") >= 0)
1604 HostAdapter->TaggedQueuingPermitted = 0xFFFF;
1605 break;
1606 }
1607 /*
1608 Determine the Host Adapter BIOS Address if the BIOS is enabled and
1609 save it in the Host Adapter structure. The BIOS is disabled if the
1610 BIOS_Address is 0.
1611 */
1612 HostAdapter->BIOS_Address = ExtendedSetupInformation.BIOS_Address << 12;
1613 /*
1614 ISA Host Adapters require Bounce Buffers if there is more than 16MB memory.
1615 */
1616 if (HostAdapter->HostAdapterBusType == BusLogic_ISA_Bus && (void *) high_memory > (void *) MAX_DMA_ADDRESS)
1617 HostAdapter->BounceBuffersRequired = true;
1618 /*
1619 BusLogic BT-445S Host Adapters prior to board revision E have a hardware
1620 bug whereby when the BIOS is enabled, transfers to/from the same address
1621 range the BIOS occupies modulo 16MB are handled incorrectly. Only properly
1622 functioning BT-445S Host Adapters have firmware version 3.37, so require
1623 that ISA Bounce Buffers be used for the buggy BT-445S models if there is
1624 more than 16MB memory.
1625 */
1626 if (HostAdapter->BIOS_Address > 0 && strcmp(HostAdapter->ModelName, "BT-445S") == 0 && strcmp(HostAdapter->FirmwareVersion, "3.37") < 0 && (void *) high_memory > (void *) MAX_DMA_ADDRESS)
1627 HostAdapter->BounceBuffersRequired = true;
1628 /*
1629 Initialize parameters common to MultiMaster and FlashPoint Host Adapters.
1630 */
1631 Common:
1632 /*
1633 Initialize the Host Adapter Full Model Name from the Model Name.
1634 */
1635 strcpy(HostAdapter->FullModelName, "BusLogic ");
1636 strcat(HostAdapter->FullModelName, HostAdapter->ModelName);
1637 /*
1638 Select an appropriate value for the Tagged Queue Depth either from a
1639 BusLogic Driver Options specification, or based on whether this Host
1640 Adapter requires that ISA Bounce Buffers be used. The Tagged Queue Depth
1641 is left at 0 for automatic determination in BusLogic_SelectQueueDepths.
1642 Initialize the Untagged Queue Depth.
1643 */
1644 for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++) {
1645 unsigned char QueueDepth = 0;
1646 if (HostAdapter->DriverOptions != NULL && HostAdapter->DriverOptions->QueueDepth[TargetID] > 0)
1647 QueueDepth = HostAdapter->DriverOptions->QueueDepth[TargetID];
1648 else if (HostAdapter->BounceBuffersRequired)
1649 QueueDepth = BusLogic_TaggedQueueDepthBB;
1650 HostAdapter->QueueDepth[TargetID] = QueueDepth;
1651 }
1652 if (HostAdapter->BounceBuffersRequired)
1653 HostAdapter->UntaggedQueueDepth = BusLogic_UntaggedQueueDepthBB;
1654 else
1655 HostAdapter->UntaggedQueueDepth = BusLogic_UntaggedQueueDepth;
1656 if (HostAdapter->DriverOptions != NULL)
1657 HostAdapter->CommonQueueDepth = HostAdapter->DriverOptions->CommonQueueDepth;
1658 if (HostAdapter->CommonQueueDepth > 0 && HostAdapter->CommonQueueDepth < HostAdapter->UntaggedQueueDepth)
1659 HostAdapter->UntaggedQueueDepth = HostAdapter->CommonQueueDepth;
1660 /*
1661 Tagged Queuing is only allowed if Disconnect/Reconnect is permitted.
1662 Therefore, mask the Tagged Queuing Permitted Default bits with the
1663 Disconnect/Reconnect Permitted bits.
1664 */
1665 HostAdapter->TaggedQueuingPermitted &= HostAdapter->DisconnectPermitted;
1666 /*
1667 Combine the default Tagged Queuing Permitted bits with any BusLogic Driver
1668 Options Tagged Queuing specification.
1669 */
1670 if (HostAdapter->DriverOptions != NULL)
1671 HostAdapter->TaggedQueuingPermitted =
1672 (HostAdapter->DriverOptions->TaggedQueuingPermitted & HostAdapter->DriverOptions->TaggedQueuingPermittedMask) | (HostAdapter->TaggedQueuingPermitted & ~HostAdapter->DriverOptions->TaggedQueuingPermittedMask);
1673
1674 /*
1675 Select an appropriate value for Bus Settle Time either from a BusLogic
1676 Driver Options specification, or from BusLogic_DefaultBusSettleTime.
1677 */
1678 if (HostAdapter->DriverOptions != NULL && HostAdapter->DriverOptions->BusSettleTime > 0)
1679 HostAdapter->BusSettleTime = HostAdapter->DriverOptions->BusSettleTime;
1680 else
1681 HostAdapter->BusSettleTime = BusLogic_DefaultBusSettleTime;
1682 /*
1683 Indicate reading the Host Adapter Configuration completed successfully.
1684 */
1685 return true;
1686}
1687
1688
1689/*
1690 BusLogic_ReportHostAdapterConfiguration reports the configuration of
1691 Host Adapter.
1692*/
1693
1694static bool __init BusLogic_ReportHostAdapterConfiguration(struct BusLogic_HostAdapter
1695 *HostAdapter)
1696{
1697 unsigned short AllTargetsMask = (1 << HostAdapter->MaxTargetDevices) - 1;
1698 unsigned short SynchronousPermitted, FastPermitted;
1699 unsigned short UltraPermitted, WidePermitted;
1700 unsigned short DisconnectPermitted, TaggedQueuingPermitted;
1701 bool CommonSynchronousNegotiation, CommonTaggedQueueDepth;
1702 char SynchronousString[BusLogic_MaxTargetDevices + 1];
1703 char WideString[BusLogic_MaxTargetDevices + 1];
1704 char DisconnectString[BusLogic_MaxTargetDevices + 1];
1705 char TaggedQueuingString[BusLogic_MaxTargetDevices + 1];
1706 char *SynchronousMessage = SynchronousString;
1707 char *WideMessage = WideString;
1708 char *DisconnectMessage = DisconnectString;
1709 char *TaggedQueuingMessage = TaggedQueuingString;
1710 int TargetID;
1711 BusLogic_Info("Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n",
1712 HostAdapter, HostAdapter->ModelName,
1713 BusLogic_HostAdapterBusNames[HostAdapter->HostAdapterBusType], (HostAdapter->HostWideSCSI ? " Wide" : ""), (HostAdapter->HostDifferentialSCSI ? " Differential" : ""), (HostAdapter->HostUltraSCSI ? " Ultra" : ""));
1714 BusLogic_Info(" Firmware Version: %s, I/O Address: 0x%X, " "IRQ Channel: %d/%s\n", HostAdapter, HostAdapter->FirmwareVersion, HostAdapter->IO_Address, HostAdapter->IRQ_Channel, (HostAdapter->LevelSensitiveInterrupt ? "Level" : "Edge"));
1715 if (HostAdapter->HostAdapterBusType != BusLogic_PCI_Bus) {
1716 BusLogic_Info(" DMA Channel: ", HostAdapter);
1717 if (HostAdapter->DMA_Channel > 0)
1718 BusLogic_Info("%d, ", HostAdapter, HostAdapter->DMA_Channel);
1719 else
1720 BusLogic_Info("None, ", HostAdapter);
1721 if (HostAdapter->BIOS_Address > 0)
1722 BusLogic_Info("BIOS Address: 0x%X, ", HostAdapter, HostAdapter->BIOS_Address);
1723 else
1724 BusLogic_Info("BIOS Address: None, ", HostAdapter);
1725 } else {
1726 BusLogic_Info(" PCI Bus: %d, Device: %d, Address: ", HostAdapter, HostAdapter->Bus, HostAdapter->Device);
1727 if (HostAdapter->PCI_Address > 0)
1728 BusLogic_Info("0x%X, ", HostAdapter, HostAdapter->PCI_Address);
1729 else
1730 BusLogic_Info("Unassigned, ", HostAdapter);
1731 }
1732 BusLogic_Info("Host Adapter SCSI ID: %d\n", HostAdapter, HostAdapter->SCSI_ID);
1733 BusLogic_Info(" Parity Checking: %s, Extended Translation: %s\n", HostAdapter, (HostAdapter->ParityCheckingEnabled ? "Enabled" : "Disabled"), (HostAdapter->ExtendedTranslationEnabled ? "Enabled" : "Disabled"));
1734 AllTargetsMask &= ~(1 << HostAdapter->SCSI_ID);
1735 SynchronousPermitted = HostAdapter->SynchronousPermitted & AllTargetsMask;
1736 FastPermitted = HostAdapter->FastPermitted & AllTargetsMask;
1737 UltraPermitted = HostAdapter->UltraPermitted & AllTargetsMask;
1738 if ((BusLogic_MultiMasterHostAdapterP(HostAdapter) && (HostAdapter->FirmwareVersion[0] >= '4' || HostAdapter->HostAdapterBusType == BusLogic_EISA_Bus)) || BusLogic_FlashPointHostAdapterP(HostAdapter)) {
1739 CommonSynchronousNegotiation = false;
1740 if (SynchronousPermitted == 0) {
1741 SynchronousMessage = "Disabled";
1742 CommonSynchronousNegotiation = true;
1743 } else if (SynchronousPermitted == AllTargetsMask) {
1744 if (FastPermitted == 0) {
1745 SynchronousMessage = "Slow";
1746 CommonSynchronousNegotiation = true;
1747 } else if (FastPermitted == AllTargetsMask) {
1748 if (UltraPermitted == 0) {
1749 SynchronousMessage = "Fast";
1750 CommonSynchronousNegotiation = true;
1751 } else if (UltraPermitted == AllTargetsMask) {
1752 SynchronousMessage = "Ultra";
1753 CommonSynchronousNegotiation = true;
1754 }
1755 }
1756 }
1757 if (!CommonSynchronousNegotiation) {
1758 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
1759 SynchronousString[TargetID] = ((!(SynchronousPermitted & (1 << TargetID))) ? 'N' : (!(FastPermitted & (1 << TargetID)) ? 'S' : (!(UltraPermitted & (1 << TargetID)) ? 'F' : 'U')));
1760 SynchronousString[HostAdapter->SCSI_ID] = '#';
1761 SynchronousString[HostAdapter->MaxTargetDevices] = '\0';
1762 }
1763 } else
1764 SynchronousMessage = (SynchronousPermitted == 0 ? "Disabled" : "Enabled");
1765 WidePermitted = HostAdapter->WidePermitted & AllTargetsMask;
1766 if (WidePermitted == 0)
1767 WideMessage = "Disabled";
1768 else if (WidePermitted == AllTargetsMask)
1769 WideMessage = "Enabled";
1770 else {
1771 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
1772 WideString[TargetID] = ((WidePermitted & (1 << TargetID)) ? 'Y' : 'N');
1773 WideString[HostAdapter->SCSI_ID] = '#';
1774 WideString[HostAdapter->MaxTargetDevices] = '\0';
1775 }
1776 DisconnectPermitted = HostAdapter->DisconnectPermitted & AllTargetsMask;
1777 if (DisconnectPermitted == 0)
1778 DisconnectMessage = "Disabled";
1779 else if (DisconnectPermitted == AllTargetsMask)
1780 DisconnectMessage = "Enabled";
1781 else {
1782 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
1783 DisconnectString[TargetID] = ((DisconnectPermitted & (1 << TargetID)) ? 'Y' : 'N');
1784 DisconnectString[HostAdapter->SCSI_ID] = '#';
1785 DisconnectString[HostAdapter->MaxTargetDevices] = '\0';
1786 }
1787 TaggedQueuingPermitted = HostAdapter->TaggedQueuingPermitted & AllTargetsMask;
1788 if (TaggedQueuingPermitted == 0)
1789 TaggedQueuingMessage = "Disabled";
1790 else if (TaggedQueuingPermitted == AllTargetsMask)
1791 TaggedQueuingMessage = "Enabled";
1792 else {
1793 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
1794 TaggedQueuingString[TargetID] = ((TaggedQueuingPermitted & (1 << TargetID)) ? 'Y' : 'N');
1795 TaggedQueuingString[HostAdapter->SCSI_ID] = '#';
1796 TaggedQueuingString[HostAdapter->MaxTargetDevices] = '\0';
1797 }
1798 BusLogic_Info(" Synchronous Negotiation: %s, Wide Negotiation: %s\n", HostAdapter, SynchronousMessage, WideMessage);
1799 BusLogic_Info(" Disconnect/Reconnect: %s, Tagged Queuing: %s\n", HostAdapter, DisconnectMessage, TaggedQueuingMessage);
1800 if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
1801 BusLogic_Info(" Scatter/Gather Limit: %d of %d segments, " "Mailboxes: %d\n", HostAdapter, HostAdapter->DriverScatterGatherLimit, HostAdapter->HostAdapterScatterGatherLimit, HostAdapter->MailboxCount);
1802 BusLogic_Info(" Driver Queue Depth: %d, " "Host Adapter Queue Depth: %d\n", HostAdapter, HostAdapter->DriverQueueDepth, HostAdapter->HostAdapterQueueDepth);
1803 } else
1804 BusLogic_Info(" Driver Queue Depth: %d, " "Scatter/Gather Limit: %d segments\n", HostAdapter, HostAdapter->DriverQueueDepth, HostAdapter->DriverScatterGatherLimit);
1805 BusLogic_Info(" Tagged Queue Depth: ", HostAdapter);
1806 CommonTaggedQueueDepth = true;
1807 for (TargetID = 1; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
1808 if (HostAdapter->QueueDepth[TargetID] != HostAdapter->QueueDepth[0]) {
1809 CommonTaggedQueueDepth = false;
1810 break;
1811 }
1812 if (CommonTaggedQueueDepth) {
1813 if (HostAdapter->QueueDepth[0] > 0)
1814 BusLogic_Info("%d", HostAdapter, HostAdapter->QueueDepth[0]);
1815 else
1816 BusLogic_Info("Automatic", HostAdapter);
1817 } else
1818 BusLogic_Info("Individual", HostAdapter);
1819 BusLogic_Info(", Untagged Queue Depth: %d\n", HostAdapter, HostAdapter->UntaggedQueueDepth);
1820 if (HostAdapter->TerminationInfoValid) {
1821 if (HostAdapter->HostWideSCSI)
1822 BusLogic_Info(" SCSI Bus Termination: %s", HostAdapter, (HostAdapter->LowByteTerminated ? (HostAdapter->HighByteTerminated ? "Both Enabled" : "Low Enabled")
1823 : (HostAdapter->HighByteTerminated ? "High Enabled" : "Both Disabled")));
1824 else
1825 BusLogic_Info(" SCSI Bus Termination: %s", HostAdapter, (HostAdapter->LowByteTerminated ? "Enabled" : "Disabled"));
1826 if (HostAdapter->HostSupportsSCAM)
1827 BusLogic_Info(", SCAM: %s", HostAdapter, (HostAdapter->SCAM_Enabled ? (HostAdapter->SCAM_Level2 ? "Enabled, Level 2" : "Enabled, Level 1")
1828 : "Disabled"));
1829 BusLogic_Info("\n", HostAdapter);
1830 }
1831 /*
1832 Indicate reporting the Host Adapter configuration completed successfully.
1833 */
1834 return true;
1835}
1836
1837
1838/*
1839 BusLogic_AcquireResources acquires the system resources necessary to use
1840 Host Adapter.
1841*/
1842
1843static bool __init BusLogic_AcquireResources(struct BusLogic_HostAdapter *HostAdapter)
1844{
1845 if (HostAdapter->IRQ_Channel == 0) {
1846 BusLogic_Error("NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n", HostAdapter);
1847 return false;
1848 }
1849 /*
1850 Acquire shared access to the IRQ Channel.
1851 */
1852 if (request_irq(HostAdapter->IRQ_Channel, BusLogic_InterruptHandler, IRQF_SHARED, HostAdapter->FullModelName, HostAdapter) < 0) {
1853 BusLogic_Error("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n", HostAdapter, HostAdapter->IRQ_Channel);
1854 return false;
1855 }
1856 HostAdapter->IRQ_ChannelAcquired = true;
1857 /*
1858 Acquire exclusive access to the DMA Channel.
1859 */
1860 if (HostAdapter->DMA_Channel > 0) {
1861 if (request_dma(HostAdapter->DMA_Channel, HostAdapter->FullModelName) < 0) {
1862 BusLogic_Error("UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n", HostAdapter, HostAdapter->DMA_Channel);
1863 return false;
1864 }
1865 set_dma_mode(HostAdapter->DMA_Channel, DMA_MODE_CASCADE);
1866 enable_dma(HostAdapter->DMA_Channel);
1867 HostAdapter->DMA_ChannelAcquired = true;
1868 }
1869 /*
1870 Indicate the System Resource Acquisition completed successfully,
1871 */
1872 return true;
1873}
1874
1875
1876/*
1877 BusLogic_ReleaseResources releases any system resources previously acquired
1878 by BusLogic_AcquireResources.
1879*/
1880
1881static void BusLogic_ReleaseResources(struct BusLogic_HostAdapter *HostAdapter)
1882{
1883 /*
1884 Release shared access to the IRQ Channel.
1885 */
1886 if (HostAdapter->IRQ_ChannelAcquired)
1887 free_irq(HostAdapter->IRQ_Channel, HostAdapter);
1888 /*
1889 Release exclusive access to the DMA Channel.
1890 */
1891 if (HostAdapter->DMA_ChannelAcquired)
1892 free_dma(HostAdapter->DMA_Channel);
1893 /*
1894 Release any allocated memory structs not released elsewhere
1895 */
1896 if (HostAdapter->MailboxSpace)
1897 pci_free_consistent(HostAdapter->PCI_Device, HostAdapter->MailboxSize, HostAdapter->MailboxSpace, HostAdapter->MailboxSpaceHandle);
1898 pci_dev_put(HostAdapter->PCI_Device);
1899 HostAdapter->MailboxSpace = NULL;
1900 HostAdapter->MailboxSpaceHandle = 0;
1901 HostAdapter->MailboxSize = 0;
1902}
1903
1904
1905/*
1906 BusLogic_InitializeHostAdapter initializes Host Adapter. This is the only
1907 function called during SCSI Host Adapter detection which modifies the state
1908 of the Host Adapter from its initial power on or hard reset state.
1909*/
1910
1911static bool BusLogic_InitializeHostAdapter(struct BusLogic_HostAdapter
1912 *HostAdapter)
1913{
1914 struct BusLogic_ExtendedMailboxRequest ExtendedMailboxRequest;
1915 enum BusLogic_RoundRobinModeRequest RoundRobinModeRequest;
1916 enum BusLogic_SetCCBFormatRequest SetCCBFormatRequest;
1917 int TargetID;
1918 /*
1919 Initialize the pointers to the first and last CCBs that are queued for
1920 completion processing.
1921 */
1922 HostAdapter->FirstCompletedCCB = NULL;
1923 HostAdapter->LastCompletedCCB = NULL;
1924 /*
1925 Initialize the Bus Device Reset Pending CCB, Tagged Queuing Active,
1926 Command Successful Flag, Active Commands, and Commands Since Reset
1927 for each Target Device.
1928 */
1929 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
1930 HostAdapter->BusDeviceResetPendingCCB[TargetID] = NULL;
1931 HostAdapter->TargetFlags[TargetID].TaggedQueuingActive = false;
1932 HostAdapter->TargetFlags[TargetID].CommandSuccessfulFlag = false;
1933 HostAdapter->ActiveCommands[TargetID] = 0;
1934 HostAdapter->CommandsSinceReset[TargetID] = 0;
1935 }
1936 /*
1937 FlashPoint Host Adapters do not use Outgoing and Incoming Mailboxes.
1938 */
1939 if (BusLogic_FlashPointHostAdapterP(HostAdapter))
1940 goto Done;
1941 /*
1942 Initialize the Outgoing and Incoming Mailbox pointers.
1943 */
1944 HostAdapter->MailboxSize = HostAdapter->MailboxCount * (sizeof(struct BusLogic_OutgoingMailbox) + sizeof(struct BusLogic_IncomingMailbox));
1945 HostAdapter->MailboxSpace = pci_alloc_consistent(HostAdapter->PCI_Device, HostAdapter->MailboxSize, &HostAdapter->MailboxSpaceHandle);
1946 if (HostAdapter->MailboxSpace == NULL)
1947 return BusLogic_Failure(HostAdapter, "MAILBOX ALLOCATION");
1948 HostAdapter->FirstOutgoingMailbox = (struct BusLogic_OutgoingMailbox *) HostAdapter->MailboxSpace;
1949 HostAdapter->LastOutgoingMailbox = HostAdapter->FirstOutgoingMailbox + HostAdapter->MailboxCount - 1;
1950 HostAdapter->NextOutgoingMailbox = HostAdapter->FirstOutgoingMailbox;
1951 HostAdapter->FirstIncomingMailbox = (struct BusLogic_IncomingMailbox *) (HostAdapter->LastOutgoingMailbox + 1);
1952 HostAdapter->LastIncomingMailbox = HostAdapter->FirstIncomingMailbox + HostAdapter->MailboxCount - 1;
1953 HostAdapter->NextIncomingMailbox = HostAdapter->FirstIncomingMailbox;
1954
1955 /*
1956 Initialize the Outgoing and Incoming Mailbox structures.
1957 */
1958 memset(HostAdapter->FirstOutgoingMailbox, 0, HostAdapter->MailboxCount * sizeof(struct BusLogic_OutgoingMailbox));
1959 memset(HostAdapter->FirstIncomingMailbox, 0, HostAdapter->MailboxCount * sizeof(struct BusLogic_IncomingMailbox));
1960 /*
1961 Initialize the Host Adapter's Pointer to the Outgoing/Incoming Mailboxes.
1962 */
1963 ExtendedMailboxRequest.MailboxCount = HostAdapter->MailboxCount;
1964 ExtendedMailboxRequest.BaseMailboxAddress = (u32) HostAdapter->MailboxSpaceHandle;
1965 if (BusLogic_Command(HostAdapter, BusLogic_InitializeExtendedMailbox, &ExtendedMailboxRequest, sizeof(ExtendedMailboxRequest), NULL, 0) < 0)
1966 return BusLogic_Failure(HostAdapter, "MAILBOX INITIALIZATION");
1967 /*
1968 Enable Strict Round Robin Mode if supported by the Host Adapter. In
1969 Strict Round Robin Mode, the Host Adapter only looks at the next Outgoing
1970 Mailbox for each new command, rather than scanning through all the
1971 Outgoing Mailboxes to find any that have new commands in them. Strict
1972 Round Robin Mode is significantly more efficient.
1973 */
1974 if (HostAdapter->StrictRoundRobinModeSupport) {
1975 RoundRobinModeRequest = BusLogic_StrictRoundRobinMode;
1976 if (BusLogic_Command(HostAdapter, BusLogic_EnableStrictRoundRobinMode, &RoundRobinModeRequest, sizeof(RoundRobinModeRequest), NULL, 0) < 0)
1977 return BusLogic_Failure(HostAdapter, "ENABLE STRICT ROUND ROBIN MODE");
1978 }
1979 /*
1980 For Host Adapters that support Extended LUN Format CCBs, issue the Set CCB
1981 Format command to allow 32 Logical Units per Target Device.
1982 */
1983 if (HostAdapter->ExtendedLUNSupport) {
1984 SetCCBFormatRequest = BusLogic_ExtendedLUNFormatCCB;
1985 if (BusLogic_Command(HostAdapter, BusLogic_SetCCBFormat, &SetCCBFormatRequest, sizeof(SetCCBFormatRequest), NULL, 0) < 0)
1986 return BusLogic_Failure(HostAdapter, "SET CCB FORMAT");
1987 }
1988 /*
1989 Announce Successful Initialization.
1990 */
1991 Done:
1992 if (!HostAdapter->HostAdapterInitialized) {
1993 BusLogic_Info("*** %s Initialized Successfully ***\n", HostAdapter, HostAdapter->FullModelName);
1994 BusLogic_Info("\n", HostAdapter);
1995 } else
1996 BusLogic_Warning("*** %s Initialized Successfully ***\n", HostAdapter, HostAdapter->FullModelName);
1997 HostAdapter->HostAdapterInitialized = true;
1998 /*
1999 Indicate the Host Adapter Initialization completed successfully.
2000 */
2001 return true;
2002}
2003
2004
2005/*
2006 BusLogic_TargetDeviceInquiry inquires about the Target Devices accessible
2007 through Host Adapter.
2008*/
2009
2010static bool __init BusLogic_TargetDeviceInquiry(struct BusLogic_HostAdapter
2011 *HostAdapter)
2012{
2013 u16 InstalledDevices;
2014 u8 InstalledDevicesID0to7[8];
2015 struct BusLogic_SetupInformation SetupInformation;
2016 u8 SynchronousPeriod[BusLogic_MaxTargetDevices];
2017 unsigned char RequestedReplyLength;
2018 int TargetID;
2019 /*
2020 Wait a few seconds between the Host Adapter Hard Reset which initiates
2021 a SCSI Bus Reset and issuing any SCSI Commands. Some SCSI devices get
2022 confused if they receive SCSI Commands too soon after a SCSI Bus Reset.
2023 */
2024 BusLogic_Delay(HostAdapter->BusSettleTime);
2025 /*
2026 FlashPoint Host Adapters do not provide for Target Device Inquiry.
2027 */
2028 if (BusLogic_FlashPointHostAdapterP(HostAdapter))
2029 return true;
2030 /*
2031 Inhibit the Target Device Inquiry if requested.
2032 */
2033 if (HostAdapter->DriverOptions != NULL && HostAdapter->DriverOptions->LocalOptions.InhibitTargetInquiry)
2034 return true;
2035 /*
2036 Issue the Inquire Target Devices command for host adapters with firmware
2037 version 4.25 or later, or the Inquire Installed Devices ID 0 to 7 command
2038 for older host adapters. This is necessary to force Synchronous Transfer
2039 Negotiation so that the Inquire Setup Information and Inquire Synchronous
2040 Period commands will return valid data. The Inquire Target Devices command
2041 is preferable to Inquire Installed Devices ID 0 to 7 since it only probes
2042 Logical Unit 0 of each Target Device.
2043 */
2044 if (strcmp(HostAdapter->FirmwareVersion, "4.25") >= 0) {
2045
2046 /*
2047 * Issue a Inquire Target Devices command. Inquire Target Devices only
2048 * tests Logical Unit 0 of each Target Device unlike the Inquire Installed
2049 * Devices commands which test Logical Units 0 - 7. Two bytes are
2050 * returned, where byte 0 bit 0 set indicates that Target Device 0 exists,
2051 * and so on.
2052 */
2053
2054 if (BusLogic_Command(HostAdapter, BusLogic_InquireTargetDevices, NULL, 0, &InstalledDevices, sizeof(InstalledDevices))
2055 != sizeof(InstalledDevices))
2056 return BusLogic_Failure(HostAdapter, "INQUIRE TARGET DEVICES");
2057 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2058 HostAdapter->TargetFlags[TargetID].TargetExists = (InstalledDevices & (1 << TargetID) ? true : false);
2059 } else {
2060
2061 /*
2062 * Issue an Inquire Installed Devices command. For each Target Device,
2063 * a byte is returned where bit 0 set indicates that Logical Unit 0
2064 * exists, bit 1 set indicates that Logical Unit 1 exists, and so on.
2065 */
2066
2067 if (BusLogic_Command(HostAdapter, BusLogic_InquireInstalledDevicesID0to7, NULL, 0, &InstalledDevicesID0to7, sizeof(InstalledDevicesID0to7))
2068 != sizeof(InstalledDevicesID0to7))
2069 return BusLogic_Failure(HostAdapter, "INQUIRE INSTALLED DEVICES ID 0 TO 7");
2070 for (TargetID = 0; TargetID < 8; TargetID++)
2071 HostAdapter->TargetFlags[TargetID].TargetExists = (InstalledDevicesID0to7[TargetID] != 0 ? true : false);
2072 }
2073 /*
2074 Issue the Inquire Setup Information command.
2075 */
2076 RequestedReplyLength = sizeof(SetupInformation);
2077 if (BusLogic_Command(HostAdapter, BusLogic_InquireSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &SetupInformation, sizeof(SetupInformation))
2078 != sizeof(SetupInformation))
2079 return BusLogic_Failure(HostAdapter, "INQUIRE SETUP INFORMATION");
2080 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2081 HostAdapter->SynchronousOffset[TargetID] = (TargetID < 8 ? SetupInformation.SynchronousValuesID0to7[TargetID].Offset : SetupInformation.SynchronousValuesID8to15[TargetID - 8].Offset);
2082 if (strcmp(HostAdapter->FirmwareVersion, "5.06L") >= 0)
2083 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2084 HostAdapter->TargetFlags[TargetID].WideTransfersActive = (TargetID < 8 ? (SetupInformation.WideTransfersActiveID0to7 & (1 << TargetID)
2085 ? true : false)
2086 : (SetupInformation.WideTransfersActiveID8to15 & (1 << (TargetID - 8))
2087 ? true : false));
2088 /*
2089 Issue the Inquire Synchronous Period command.
2090 */
2091 if (HostAdapter->FirmwareVersion[0] >= '3') {
2092
2093 /* Issue a Inquire Synchronous Period command. For each Target Device,
2094 * a byte is returned which represents the Synchronous Transfer Period
2095 * in units of 10 nanoseconds.
2096 */
2097
2098 RequestedReplyLength = sizeof(SynchronousPeriod);
2099 if (BusLogic_Command(HostAdapter, BusLogic_InquireSynchronousPeriod, &RequestedReplyLength, sizeof(RequestedReplyLength), &SynchronousPeriod, sizeof(SynchronousPeriod))
2100 != sizeof(SynchronousPeriod))
2101 return BusLogic_Failure(HostAdapter, "INQUIRE SYNCHRONOUS PERIOD");
2102 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2103 HostAdapter->SynchronousPeriod[TargetID] = SynchronousPeriod[TargetID];
2104 } else
2105 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2106 if (SetupInformation.SynchronousValuesID0to7[TargetID].Offset > 0)
2107 HostAdapter->SynchronousPeriod[TargetID] = 20 + 5 * SetupInformation.SynchronousValuesID0to7[TargetID]
2108 .TransferPeriod;
2109 /*
2110 Indicate the Target Device Inquiry completed successfully.
2111 */
2112 return true;
2113}
2114
2115/*
2116 BusLogic_InitializeHostStructure initializes the fields in the SCSI Host
2117 structure. The base, io_port, n_io_ports, irq, and dma_channel fields in the
2118 SCSI Host structure are intentionally left uninitialized, as this driver
2119 handles acquisition and release of these resources explicitly, as well as
2120 ensuring exclusive access to the Host Adapter hardware and data structures
2121 through explicit acquisition and release of the Host Adapter's Lock.
2122*/
2123
2124static void __init BusLogic_InitializeHostStructure(struct BusLogic_HostAdapter
2125 *HostAdapter, struct Scsi_Host *Host)
2126{
2127 Host->max_id = HostAdapter->MaxTargetDevices;
2128 Host->max_lun = HostAdapter->MaxLogicalUnits;
2129 Host->max_channel = 0;
2130 Host->unique_id = HostAdapter->IO_Address;
2131 Host->this_id = HostAdapter->SCSI_ID;
2132 Host->can_queue = HostAdapter->DriverQueueDepth;
2133 Host->sg_tablesize = HostAdapter->DriverScatterGatherLimit;
2134 Host->unchecked_isa_dma = HostAdapter->BounceBuffersRequired;
2135 Host->cmd_per_lun = HostAdapter->UntaggedQueueDepth;
2136}
2137
2138/*
2139 BusLogic_SlaveConfigure will actually set the queue depth on individual
2140 scsi devices as they are permanently added to the device chain. We
2141 shamelessly rip off the SelectQueueDepths code to make this work mostly
2142 like it used to. Since we don't get called once at the end of the scan
2143 but instead get called for each device, we have to do things a bit
2144 differently.
2145*/
2146static int BusLogic_SlaveConfigure(struct scsi_device *Device)
2147{
2148 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Device->host->hostdata;
2149 int TargetID = Device->id;
2150 int QueueDepth = HostAdapter->QueueDepth[TargetID];
2151
2152 if (HostAdapter->TargetFlags[TargetID].TaggedQueuingSupported && (HostAdapter->TaggedQueuingPermitted & (1 << TargetID))) {
2153 if (QueueDepth == 0)
2154 QueueDepth = BusLogic_MaxAutomaticTaggedQueueDepth;
2155 HostAdapter->QueueDepth[TargetID] = QueueDepth;
2156 scsi_adjust_queue_depth(Device, MSG_SIMPLE_TAG, QueueDepth);
2157 } else {
2158 HostAdapter->TaggedQueuingPermitted &= ~(1 << TargetID);
2159 QueueDepth = HostAdapter->UntaggedQueueDepth;
2160 HostAdapter->QueueDepth[TargetID] = QueueDepth;
2161 scsi_adjust_queue_depth(Device, 0, QueueDepth);
2162 }
2163 QueueDepth = 0;
2164 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
2165 if (HostAdapter->TargetFlags[TargetID].TargetExists) {
2166 QueueDepth += HostAdapter->QueueDepth[TargetID];
2167 }
2168 if (QueueDepth > HostAdapter->AllocatedCCBs)
2169 BusLogic_CreateAdditionalCCBs(HostAdapter, QueueDepth - HostAdapter->AllocatedCCBs, false);
2170 return 0;
2171}
2172
2173/*
2174 BusLogic_DetectHostAdapter probes for BusLogic Host Adapters at the standard
2175 I/O Addresses where they may be located, initializing, registering, and
2176 reporting the configuration of each BusLogic Host Adapter it finds. It
2177 returns the number of BusLogic Host Adapters successfully initialized and
2178 registered.
2179*/
2180
2181static int __init BusLogic_init(void)
2182{
2183 int BusLogicHostAdapterCount = 0, DriverOptionsIndex = 0, ProbeIndex;
2184 struct BusLogic_HostAdapter *PrototypeHostAdapter;
2185 int ret = 0;
2186
2187#ifdef MODULE
2188 if (BusLogic)
2189 BusLogic_Setup(BusLogic);
2190#endif
2191
2192 if (BusLogic_ProbeOptions.NoProbe)
2193 return -ENODEV;
2194 BusLogic_ProbeInfoList =
2195 kzalloc(BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo), GFP_KERNEL);
2196 if (BusLogic_ProbeInfoList == NULL) {
2197 BusLogic_Error("BusLogic: Unable to allocate Probe Info List\n", NULL);
2198 return -ENOMEM;
2199 }
2200
2201 PrototypeHostAdapter =
2202 kzalloc(sizeof(struct BusLogic_HostAdapter), GFP_KERNEL);
2203 if (PrototypeHostAdapter == NULL) {
2204 kfree(BusLogic_ProbeInfoList);
2205 BusLogic_Error("BusLogic: Unable to allocate Prototype " "Host Adapter\n", NULL);
2206 return -ENOMEM;
2207 }
2208
2209#ifdef MODULE
2210 if (BusLogic != NULL)
2211 BusLogic_Setup(BusLogic);
2212#endif
2213 BusLogic_InitializeProbeInfoList(PrototypeHostAdapter);
2214 for (ProbeIndex = 0; ProbeIndex < BusLogic_ProbeInfoCount; ProbeIndex++) {
2215 struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[ProbeIndex];
2216 struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter;
2217 struct Scsi_Host *Host;
2218 if (ProbeInfo->IO_Address == 0)
2219 continue;
2220 memset(HostAdapter, 0, sizeof(struct BusLogic_HostAdapter));
2221 HostAdapter->HostAdapterType = ProbeInfo->HostAdapterType;
2222 HostAdapter->HostAdapterBusType = ProbeInfo->HostAdapterBusType;
2223 HostAdapter->IO_Address = ProbeInfo->IO_Address;
2224 HostAdapter->PCI_Address = ProbeInfo->PCI_Address;
2225 HostAdapter->Bus = ProbeInfo->Bus;
2226 HostAdapter->Device = ProbeInfo->Device;
2227 HostAdapter->PCI_Device = ProbeInfo->PCI_Device;
2228 HostAdapter->IRQ_Channel = ProbeInfo->IRQ_Channel;
2229 HostAdapter->AddressCount = BusLogic_HostAdapterAddressCount[HostAdapter->HostAdapterType];
2230
2231 /*
2232 Make sure region is free prior to probing.
2233 */
2234 if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount,
2235 "BusLogic"))
2236 continue;
2237 /*
2238 Probe the Host Adapter. If unsuccessful, abort further initialization.
2239 */
2240 if (!BusLogic_ProbeHostAdapter(HostAdapter)) {
2241 release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
2242 continue;
2243 }
2244 /*
2245 Hard Reset the Host Adapter. If unsuccessful, abort further
2246 initialization.
2247 */
2248 if (!BusLogic_HardwareResetHostAdapter(HostAdapter, true)) {
2249 release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
2250 continue;
2251 }
2252 /*
2253 Check the Host Adapter. If unsuccessful, abort further initialization.
2254 */
2255 if (!BusLogic_CheckHostAdapter(HostAdapter)) {
2256 release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
2257 continue;
2258 }
2259 /*
2260 Initialize the Driver Options field if provided.
2261 */
2262 if (DriverOptionsIndex < BusLogic_DriverOptionsCount)
2263 HostAdapter->DriverOptions = &BusLogic_DriverOptions[DriverOptionsIndex++];
2264 /*
2265 Announce the Driver Version and Date, Author's Name, Copyright Notice,
2266 and Electronic Mail Address.
2267 */
2268 BusLogic_AnnounceDriver(HostAdapter);
2269 /*
2270 Register the SCSI Host structure.
2271 */
2272
2273 Host = scsi_host_alloc(&Bus_Logic_template, sizeof(struct BusLogic_HostAdapter));
2274 if (Host == NULL) {
2275 release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
2276 continue;
2277 }
2278 HostAdapter = (struct BusLogic_HostAdapter *) Host->hostdata;
2279 memcpy(HostAdapter, PrototypeHostAdapter, sizeof(struct BusLogic_HostAdapter));
2280 HostAdapter->SCSI_Host = Host;
2281 HostAdapter->HostNumber = Host->host_no;
2282 /*
2283 Add Host Adapter to the end of the list of registered BusLogic
2284 Host Adapters.
2285 */
2286 list_add_tail(&HostAdapter->host_list, &BusLogic_host_list);
2287
2288 /*
2289 Read the Host Adapter Configuration, Configure the Host Adapter,
2290 Acquire the System Resources necessary to use the Host Adapter, then
2291 Create the Initial CCBs, Initialize the Host Adapter, and finally
2292 perform Target Device Inquiry.
2293
2294 From this point onward, any failure will be assumed to be due to a
2295 problem with the Host Adapter, rather than due to having mistakenly
2296 identified this port as belonging to a BusLogic Host Adapter. The
2297 I/O Address range will not be released, thereby preventing it from
2298 being incorrectly identified as any other type of Host Adapter.
2299 */
2300 if (BusLogic_ReadHostAdapterConfiguration(HostAdapter) &&
2301 BusLogic_ReportHostAdapterConfiguration(HostAdapter) &&
2302 BusLogic_AcquireResources(HostAdapter) &&
2303 BusLogic_CreateInitialCCBs(HostAdapter) &&
2304 BusLogic_InitializeHostAdapter(HostAdapter) &&
2305 BusLogic_TargetDeviceInquiry(HostAdapter)) {
2306 /*
2307 Initialization has been completed successfully. Release and
2308 re-register usage of the I/O Address range so that the Model
2309 Name of the Host Adapter will appear, and initialize the SCSI
2310 Host structure.
2311 */
2312 release_region(HostAdapter->IO_Address,
2313 HostAdapter->AddressCount);
2314 if (!request_region(HostAdapter->IO_Address,
2315 HostAdapter->AddressCount,
2316 HostAdapter->FullModelName)) {
2317 printk(KERN_WARNING
2318 "BusLogic: Release and re-register of "
2319 "port 0x%04lx failed \n",
2320 (unsigned long)HostAdapter->IO_Address);
2321 BusLogic_DestroyCCBs(HostAdapter);
2322 BusLogic_ReleaseResources(HostAdapter);
2323 list_del(&HostAdapter->host_list);
2324 scsi_host_put(Host);
2325 ret = -ENOMEM;
2326 } else {
2327 BusLogic_InitializeHostStructure(HostAdapter,
2328 Host);
2329 if (scsi_add_host(Host, HostAdapter->PCI_Device
2330 ? &HostAdapter->PCI_Device->dev
2331 : NULL)) {
2332 printk(KERN_WARNING
2333 "BusLogic: scsi_add_host()"
2334 "failed!\n");
2335 BusLogic_DestroyCCBs(HostAdapter);
2336 BusLogic_ReleaseResources(HostAdapter);
2337 list_del(&HostAdapter->host_list);
2338 scsi_host_put(Host);
2339 ret = -ENODEV;
2340 } else {
2341 scsi_scan_host(Host);
2342 BusLogicHostAdapterCount++;
2343 }
2344 }
2345 } else {
2346 /*
2347 An error occurred during Host Adapter Configuration Querying, Host
2348 Adapter Configuration, Resource Acquisition, CCB Creation, Host
2349 Adapter Initialization, or Target Device Inquiry, so remove Host
2350 Adapter from the list of registered BusLogic Host Adapters, destroy
2351 the CCBs, Release the System Resources, and Unregister the SCSI
2352 Host.
2353 */
2354 BusLogic_DestroyCCBs(HostAdapter);
2355 BusLogic_ReleaseResources(HostAdapter);
2356 list_del(&HostAdapter->host_list);
2357 scsi_host_put(Host);
2358 ret = -ENODEV;
2359 }
2360 }
2361 kfree(PrototypeHostAdapter);
2362 kfree(BusLogic_ProbeInfoList);
2363 BusLogic_ProbeInfoList = NULL;
2364 return ret;
2365}
2366
2367
2368/*
2369 BusLogic_ReleaseHostAdapter releases all resources previously acquired to
2370 support a specific Host Adapter, including the I/O Address range, and
2371 unregisters the BusLogic Host Adapter.
2372*/
2373
2374static int __exit BusLogic_ReleaseHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
2375{
2376 struct Scsi_Host *Host = HostAdapter->SCSI_Host;
2377
2378 scsi_remove_host(Host);
2379
2380 /*
2381 FlashPoint Host Adapters must first be released by the FlashPoint
2382 SCCB Manager.
2383 */
2384 if (BusLogic_FlashPointHostAdapterP(HostAdapter))
2385 FlashPoint_ReleaseHostAdapter(HostAdapter->CardHandle);
2386 /*
2387 Destroy the CCBs and release any system resources acquired to
2388 support Host Adapter.
2389 */
2390 BusLogic_DestroyCCBs(HostAdapter);
2391 BusLogic_ReleaseResources(HostAdapter);
2392 /*
2393 Release usage of the I/O Address range.
2394 */
2395 release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
2396 /*
2397 Remove Host Adapter from the list of registered BusLogic Host Adapters.
2398 */
2399 list_del(&HostAdapter->host_list);
2400
2401 scsi_host_put(Host);
2402 return 0;
2403}
2404
2405
2406/*
2407 BusLogic_QueueCompletedCCB queues CCB for completion processing.
2408*/
2409
2410static void BusLogic_QueueCompletedCCB(struct BusLogic_CCB *CCB)
2411{
2412 struct BusLogic_HostAdapter *HostAdapter = CCB->HostAdapter;
2413 CCB->Status = BusLogic_CCB_Completed;
2414 CCB->Next = NULL;
2415 if (HostAdapter->FirstCompletedCCB == NULL) {
2416 HostAdapter->FirstCompletedCCB = CCB;
2417 HostAdapter->LastCompletedCCB = CCB;
2418 } else {
2419 HostAdapter->LastCompletedCCB->Next = CCB;
2420 HostAdapter->LastCompletedCCB = CCB;
2421 }
2422 HostAdapter->ActiveCommands[CCB->TargetID]--;
2423}
2424
2425
2426/*
2427 BusLogic_ComputeResultCode computes a SCSI Subsystem Result Code from
2428 the Host Adapter Status and Target Device Status.
2429*/
2430
2431static int BusLogic_ComputeResultCode(struct BusLogic_HostAdapter *HostAdapter, enum BusLogic_HostAdapterStatus HostAdapterStatus, enum BusLogic_TargetDeviceStatus TargetDeviceStatus)
2432{
2433 int HostStatus;
2434 switch (HostAdapterStatus) {
2435 case BusLogic_CommandCompletedNormally:
2436 case BusLogic_LinkedCommandCompleted:
2437 case BusLogic_LinkedCommandCompletedWithFlag:
2438 HostStatus = DID_OK;
2439 break;
2440 case BusLogic_SCSISelectionTimeout:
2441 HostStatus = DID_TIME_OUT;
2442 break;
2443 case BusLogic_InvalidOutgoingMailboxActionCode:
2444 case BusLogic_InvalidCommandOperationCode:
2445 case BusLogic_InvalidCommandParameter:
2446 BusLogic_Warning("BusLogic Driver Protocol Error 0x%02X\n", HostAdapter, HostAdapterStatus);
2447 case BusLogic_DataUnderRun:
2448 case BusLogic_DataOverRun:
2449 case BusLogic_UnexpectedBusFree:
2450 case BusLogic_LinkedCCBhasInvalidLUN:
2451 case BusLogic_AutoRequestSenseFailed:
2452 case BusLogic_TaggedQueuingMessageRejected:
2453 case BusLogic_UnsupportedMessageReceived:
2454 case BusLogic_HostAdapterHardwareFailed:
2455 case BusLogic_TargetDeviceReconnectedImproperly:
2456 case BusLogic_AbortQueueGenerated:
2457 case BusLogic_HostAdapterSoftwareError:
2458 case BusLogic_HostAdapterHardwareTimeoutError:
2459 case BusLogic_SCSIParityErrorDetected:
2460 HostStatus = DID_ERROR;
2461 break;
2462 case BusLogic_InvalidBusPhaseRequested:
2463 case BusLogic_TargetFailedResponseToATN:
2464 case BusLogic_HostAdapterAssertedRST:
2465 case BusLogic_OtherDeviceAssertedRST:
2466 case BusLogic_HostAdapterAssertedBusDeviceReset:
2467 HostStatus = DID_RESET;
2468 break;
2469 default:
2470 BusLogic_Warning("Unknown Host Adapter Status 0x%02X\n", HostAdapter, HostAdapterStatus);
2471 HostStatus = DID_ERROR;
2472 break;
2473 }
2474 return (HostStatus << 16) | TargetDeviceStatus;
2475}
2476
2477
2478/*
2479 BusLogic_ScanIncomingMailboxes scans the Incoming Mailboxes saving any
2480 Incoming Mailbox entries for completion processing.
2481*/
2482
2483static void BusLogic_ScanIncomingMailboxes(struct BusLogic_HostAdapter *HostAdapter)
2484{
2485 /*
2486 Scan through the Incoming Mailboxes in Strict Round Robin fashion, saving
2487 any completed CCBs for further processing. It is essential that for each
2488 CCB and SCSI Command issued, command completion processing is performed
2489 exactly once. Therefore, only Incoming Mailboxes with completion code
2490 Command Completed Without Error, Command Completed With Error, or Command
2491 Aborted At Host Request are saved for completion processing. When an
2492 Incoming Mailbox has a completion code of Aborted Command Not Found, the
2493 CCB had already completed or been aborted before the current Abort request
2494 was processed, and so completion processing has already occurred and no
2495 further action should be taken.
2496 */
2497 struct BusLogic_IncomingMailbox *NextIncomingMailbox = HostAdapter->NextIncomingMailbox;
2498 enum BusLogic_CompletionCode CompletionCode;
2499 while ((CompletionCode = NextIncomingMailbox->CompletionCode) != BusLogic_IncomingMailboxFree) {
2500 /*
2501 We are only allowed to do this because we limit our architectures we
2502 run on to machines where bus_to_virt() actually works. There *needs*
2503 to be a dma_addr_to_virt() in the new PCI DMA mapping interface to
2504 replace bus_to_virt() or else this code is going to become very
2505 innefficient.
2506 */
2507 struct BusLogic_CCB *CCB = (struct BusLogic_CCB *) Bus_to_Virtual(NextIncomingMailbox->CCB);
2508 if (CompletionCode != BusLogic_AbortedCommandNotFound) {
2509 if (CCB->Status == BusLogic_CCB_Active || CCB->Status == BusLogic_CCB_Reset) {
2510 /*
2511 Save the Completion Code for this CCB and queue the CCB
2512 for completion processing.
2513 */
2514 CCB->CompletionCode = CompletionCode;
2515 BusLogic_QueueCompletedCCB(CCB);
2516 } else {
2517 /*
2518 If a CCB ever appears in an Incoming Mailbox and is not marked
2519 as status Active or Reset, then there is most likely a bug in
2520 the Host Adapter firmware.
2521 */
2522 BusLogic_Warning("Illegal CCB #%ld status %d in " "Incoming Mailbox\n", HostAdapter, CCB->SerialNumber, CCB->Status);
2523 }
2524 }
2525 NextIncomingMailbox->CompletionCode = BusLogic_IncomingMailboxFree;
2526 if (++NextIncomingMailbox > HostAdapter->LastIncomingMailbox)
2527 NextIncomingMailbox = HostAdapter->FirstIncomingMailbox;
2528 }
2529 HostAdapter->NextIncomingMailbox = NextIncomingMailbox;
2530}
2531
2532
2533/*
2534 BusLogic_ProcessCompletedCCBs iterates over the completed CCBs for Host
2535 Adapter setting the SCSI Command Result Codes, deallocating the CCBs, and
2536 calling the SCSI Subsystem Completion Routines. The Host Adapter's Lock
2537 should already have been acquired by the caller.
2538*/
2539
2540static void BusLogic_ProcessCompletedCCBs(struct BusLogic_HostAdapter *HostAdapter)
2541{
2542 if (HostAdapter->ProcessCompletedCCBsActive)
2543 return;
2544 HostAdapter->ProcessCompletedCCBsActive = true;
2545 while (HostAdapter->FirstCompletedCCB != NULL) {
2546 struct BusLogic_CCB *CCB = HostAdapter->FirstCompletedCCB;
2547 struct scsi_cmnd *Command = CCB->Command;
2548 HostAdapter->FirstCompletedCCB = CCB->Next;
2549 if (HostAdapter->FirstCompletedCCB == NULL)
2550 HostAdapter->LastCompletedCCB = NULL;
2551 /*
2552 Process the Completed CCB.
2553 */
2554 if (CCB->Opcode == BusLogic_BusDeviceReset) {
2555 int TargetID = CCB->TargetID;
2556 BusLogic_Warning("Bus Device Reset CCB #%ld to Target " "%d Completed\n", HostAdapter, CCB->SerialNumber, TargetID);
2557 BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].BusDeviceResetsCompleted);
2558 HostAdapter->TargetFlags[TargetID].TaggedQueuingActive = false;
2559 HostAdapter->CommandsSinceReset[TargetID] = 0;
2560 HostAdapter->LastResetCompleted[TargetID] = jiffies;
2561 /*
2562 Place CCB back on the Host Adapter's free list.
2563 */
2564 BusLogic_DeallocateCCB(CCB);
2565#if 0 /* this needs to be redone different for new EH */
2566 /*
2567 Bus Device Reset CCBs have the Command field non-NULL only when a
2568 Bus Device Reset was requested for a Command that did not have a
2569 currently active CCB in the Host Adapter (i.e., a Synchronous
2570 Bus Device Reset), and hence would not have its Completion Routine
2571 called otherwise.
2572 */
2573 while (Command != NULL) {
2574 struct scsi_cmnd *NextCommand = Command->reset_chain;
2575 Command->reset_chain = NULL;
2576 Command->result = DID_RESET << 16;
2577 Command->scsi_done(Command);
2578 Command = NextCommand;
2579 }
2580#endif
2581 /*
2582 Iterate over the CCBs for this Host Adapter performing completion
2583 processing for any CCBs marked as Reset for this Target.
2584 */
2585 for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll)
2586 if (CCB->Status == BusLogic_CCB_Reset && CCB->TargetID == TargetID) {
2587 Command = CCB->Command;
2588 BusLogic_DeallocateCCB(CCB);
2589 HostAdapter->ActiveCommands[TargetID]--;
2590 Command->result = DID_RESET << 16;
2591 Command->scsi_done(Command);
2592 }
2593 HostAdapter->BusDeviceResetPendingCCB[TargetID] = NULL;
2594 } else {
2595 /*
2596 Translate the Completion Code, Host Adapter Status, and Target
2597 Device Status into a SCSI Subsystem Result Code.
2598 */
2599 switch (CCB->CompletionCode) {
2600 case BusLogic_IncomingMailboxFree:
2601 case BusLogic_AbortedCommandNotFound:
2602 case BusLogic_InvalidCCB:
2603 BusLogic_Warning("CCB #%ld to Target %d Impossible State\n", HostAdapter, CCB->SerialNumber, CCB->TargetID);
2604 break;
2605 case BusLogic_CommandCompletedWithoutError:
2606 HostAdapter->TargetStatistics[CCB->TargetID]
2607 .CommandsCompleted++;
2608 HostAdapter->TargetFlags[CCB->TargetID]
2609 .CommandSuccessfulFlag = true;
2610 Command->result = DID_OK << 16;
2611 break;
2612 case BusLogic_CommandAbortedAtHostRequest:
2613 BusLogic_Warning("CCB #%ld to Target %d Aborted\n", HostAdapter, CCB->SerialNumber, CCB->TargetID);
2614 BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[CCB->TargetID]
2615 .CommandAbortsCompleted);
2616 Command->result = DID_ABORT << 16;
2617 break;
2618 case BusLogic_CommandCompletedWithError:
2619 Command->result = BusLogic_ComputeResultCode(HostAdapter, CCB->HostAdapterStatus, CCB->TargetDeviceStatus);
2620 if (CCB->HostAdapterStatus != BusLogic_SCSISelectionTimeout) {
2621 HostAdapter->TargetStatistics[CCB->TargetID]
2622 .CommandsCompleted++;
2623 if (BusLogic_GlobalOptions.TraceErrors) {
2624 int i;
2625 BusLogic_Notice("CCB #%ld Target %d: Result %X Host "
2626 "Adapter Status %02X " "Target Status %02X\n", HostAdapter, CCB->SerialNumber, CCB->TargetID, Command->result, CCB->HostAdapterStatus, CCB->TargetDeviceStatus);
2627 BusLogic_Notice("CDB ", HostAdapter);
2628 for (i = 0; i < CCB->CDB_Length; i++)
2629 BusLogic_Notice(" %02X", HostAdapter, CCB->CDB[i]);
2630 BusLogic_Notice("\n", HostAdapter);
2631 BusLogic_Notice("Sense ", HostAdapter);
2632 for (i = 0; i < CCB->SenseDataLength; i++)
2633 BusLogic_Notice(" %02X", HostAdapter, Command->sense_buffer[i]);
2634 BusLogic_Notice("\n", HostAdapter);
2635 }
2636 }
2637 break;
2638 }
2639 /*
2640 When an INQUIRY command completes normally, save the
2641 CmdQue (Tagged Queuing Supported) and WBus16 (16 Bit
2642 Wide Data Transfers Supported) bits.
2643 */
2644 if (CCB->CDB[0] == INQUIRY && CCB->CDB[1] == 0 && CCB->HostAdapterStatus == BusLogic_CommandCompletedNormally) {
2645 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[CCB->TargetID];
2646 struct SCSI_Inquiry *InquiryResult =
2647 (struct SCSI_Inquiry *) scsi_sglist(Command);
2648 TargetFlags->TargetExists = true;
2649 TargetFlags->TaggedQueuingSupported = InquiryResult->CmdQue;
2650 TargetFlags->WideTransfersSupported = InquiryResult->WBus16;
2651 }
2652 /*
2653 Place CCB back on the Host Adapter's free list.
2654 */
2655 BusLogic_DeallocateCCB(CCB);
2656 /*
2657 Call the SCSI Command Completion Routine.
2658 */
2659 Command->scsi_done(Command);
2660 }
2661 }
2662 HostAdapter->ProcessCompletedCCBsActive = false;
2663}
2664
2665
2666/*
2667 BusLogic_InterruptHandler handles hardware interrupts from BusLogic Host
2668 Adapters.
2669*/
2670
2671static irqreturn_t BusLogic_InterruptHandler(int IRQ_Channel, void *DeviceIdentifier)
2672{
2673 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) DeviceIdentifier;
2674 unsigned long ProcessorFlags;
2675 /*
2676 Acquire exclusive access to Host Adapter.
2677 */
2678 spin_lock_irqsave(HostAdapter->SCSI_Host->host_lock, ProcessorFlags);
2679 /*
2680 Handle Interrupts appropriately for each Host Adapter type.
2681 */
2682 if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
2683 union BusLogic_InterruptRegister InterruptRegister;
2684 /*
2685 Read the Host Adapter Interrupt Register.
2686 */
2687 InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
2688 if (InterruptRegister.ir.InterruptValid) {
2689 /*
2690 Acknowledge the interrupt and reset the Host Adapter
2691 Interrupt Register.
2692 */
2693 BusLogic_InterruptReset(HostAdapter);
2694 /*
2695 Process valid External SCSI Bus Reset and Incoming Mailbox
2696 Loaded Interrupts. Command Complete Interrupts are noted,
2697 and Outgoing Mailbox Available Interrupts are ignored, as
2698 they are never enabled.
2699 */
2700 if (InterruptRegister.ir.ExternalBusReset)
2701 HostAdapter->HostAdapterExternalReset = true;
2702 else if (InterruptRegister.ir.IncomingMailboxLoaded)
2703 BusLogic_ScanIncomingMailboxes(HostAdapter);
2704 else if (InterruptRegister.ir.CommandComplete)
2705 HostAdapter->HostAdapterCommandCompleted = true;
2706 }
2707 } else {
2708 /*
2709 Check if there is a pending interrupt for this Host Adapter.
2710 */
2711 if (FlashPoint_InterruptPending(HostAdapter->CardHandle))
2712 switch (FlashPoint_HandleInterrupt(HostAdapter->CardHandle)) {
2713 case FlashPoint_NormalInterrupt:
2714 break;
2715 case FlashPoint_ExternalBusReset:
2716 HostAdapter->HostAdapterExternalReset = true;
2717 break;
2718 case FlashPoint_InternalError:
2719 BusLogic_Warning("Internal FlashPoint Error detected" " - Resetting Host Adapter\n", HostAdapter);
2720 HostAdapter->HostAdapterInternalError = true;
2721 break;
2722 }
2723 }
2724 /*
2725 Process any completed CCBs.
2726 */
2727 if (HostAdapter->FirstCompletedCCB != NULL)
2728 BusLogic_ProcessCompletedCCBs(HostAdapter);
2729 /*
2730 Reset the Host Adapter if requested.
2731 */
2732 if (HostAdapter->HostAdapterExternalReset) {
2733 BusLogic_Warning("Resetting %s due to External SCSI Bus Reset\n", HostAdapter, HostAdapter->FullModelName);
2734 BusLogic_IncrementErrorCounter(&HostAdapter->ExternalHostAdapterResets);
2735 BusLogic_ResetHostAdapter(HostAdapter, false);
2736 HostAdapter->HostAdapterExternalReset = false;
2737 } else if (HostAdapter->HostAdapterInternalError) {
2738 BusLogic_Warning("Resetting %s due to Host Adapter Internal Error\n", HostAdapter, HostAdapter->FullModelName);
2739 BusLogic_IncrementErrorCounter(&HostAdapter->HostAdapterInternalErrors);
2740 BusLogic_ResetHostAdapter(HostAdapter, true);
2741 HostAdapter->HostAdapterInternalError = false;
2742 }
2743 /*
2744 Release exclusive access to Host Adapter.
2745 */
2746 spin_unlock_irqrestore(HostAdapter->SCSI_Host->host_lock, ProcessorFlags);
2747 return IRQ_HANDLED;
2748}
2749
2750
2751/*
2752 BusLogic_WriteOutgoingMailbox places CCB and Action Code into an Outgoing
2753 Mailbox for execution by Host Adapter. The Host Adapter's Lock should
2754 already have been acquired by the caller.
2755*/
2756
2757static bool BusLogic_WriteOutgoingMailbox(struct BusLogic_HostAdapter
2758 *HostAdapter, enum BusLogic_ActionCode ActionCode, struct BusLogic_CCB *CCB)
2759{
2760 struct BusLogic_OutgoingMailbox *NextOutgoingMailbox;
2761 NextOutgoingMailbox = HostAdapter->NextOutgoingMailbox;
2762 if (NextOutgoingMailbox->ActionCode == BusLogic_OutgoingMailboxFree) {
2763 CCB->Status = BusLogic_CCB_Active;
2764 /*
2765 The CCB field must be written before the Action Code field since
2766 the Host Adapter is operating asynchronously and the locking code
2767 does not protect against simultaneous access by the Host Adapter.
2768 */
2769 NextOutgoingMailbox->CCB = CCB->DMA_Handle;
2770 NextOutgoingMailbox->ActionCode = ActionCode;
2771 BusLogic_StartMailboxCommand(HostAdapter);
2772 if (++NextOutgoingMailbox > HostAdapter->LastOutgoingMailbox)
2773 NextOutgoingMailbox = HostAdapter->FirstOutgoingMailbox;
2774 HostAdapter->NextOutgoingMailbox = NextOutgoingMailbox;
2775 if (ActionCode == BusLogic_MailboxStartCommand) {
2776 HostAdapter->ActiveCommands[CCB->TargetID]++;
2777 if (CCB->Opcode != BusLogic_BusDeviceReset)
2778 HostAdapter->TargetStatistics[CCB->TargetID].CommandsAttempted++;
2779 }
2780 return true;
2781 }
2782 return false;
2783}
2784
2785/* Error Handling (EH) support */
2786
2787static int BusLogic_host_reset(struct scsi_cmnd * SCpnt)
2788{
2789 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) SCpnt->device->host->hostdata;
2790
2791 unsigned int id = SCpnt->device->id;
2792 struct BusLogic_TargetStatistics *stats = &HostAdapter->TargetStatistics[id];
2793 int rc;
2794
2795 spin_lock_irq(SCpnt->device->host->host_lock);
2796
2797 BusLogic_IncrementErrorCounter(&stats->HostAdapterResetsRequested);
2798
2799 rc = BusLogic_ResetHostAdapter(HostAdapter, false);
2800 spin_unlock_irq(SCpnt->device->host->host_lock);
2801 return rc;
2802}
2803
2804/*
2805 BusLogic_QueueCommand creates a CCB for Command and places it into an
2806 Outgoing Mailbox for execution by the associated Host Adapter.
2807*/
2808
2809static int BusLogic_QueueCommand_lck(struct scsi_cmnd *Command, void (*CompletionRoutine) (struct scsi_cmnd *))
2810{
2811 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Command->device->host->hostdata;
2812 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[Command->device->id];
2813 struct BusLogic_TargetStatistics *TargetStatistics = HostAdapter->TargetStatistics;
2814 unsigned char *CDB = Command->cmnd;
2815 int CDB_Length = Command->cmd_len;
2816 int TargetID = Command->device->id;
2817 int LogicalUnit = Command->device->lun;
2818 int BufferLength = scsi_bufflen(Command);
2819 int Count;
2820 struct BusLogic_CCB *CCB;
2821 /*
2822 SCSI REQUEST_SENSE commands will be executed automatically by the Host
2823 Adapter for any errors, so they should not be executed explicitly unless
2824 the Sense Data is zero indicating that no error occurred.
2825 */
2826 if (CDB[0] == REQUEST_SENSE && Command->sense_buffer[0] != 0) {
2827 Command->result = DID_OK << 16;
2828 CompletionRoutine(Command);
2829 return 0;
2830 }
2831 /*
2832 Allocate a CCB from the Host Adapter's free list. In the unlikely event
2833 that there are none available and memory allocation fails, wait 1 second
2834 and try again. If that fails, the Host Adapter is probably hung so signal
2835 an error as a Host Adapter Hard Reset should be initiated soon.
2836 */
2837 CCB = BusLogic_AllocateCCB(HostAdapter);
2838 if (CCB == NULL) {
2839 spin_unlock_irq(HostAdapter->SCSI_Host->host_lock);
2840 BusLogic_Delay(1);
2841 spin_lock_irq(HostAdapter->SCSI_Host->host_lock);
2842 CCB = BusLogic_AllocateCCB(HostAdapter);
2843 if (CCB == NULL) {
2844 Command->result = DID_ERROR << 16;
2845 CompletionRoutine(Command);
2846 return 0;
2847 }
2848 }
2849
2850 /*
2851 Initialize the fields in the BusLogic Command Control Block (CCB).
2852 */
2853 Count = scsi_dma_map(Command);
2854 BUG_ON(Count < 0);
2855 if (Count) {
2856 struct scatterlist *sg;
2857 int i;
2858
2859 CCB->Opcode = BusLogic_InitiatorCCB_ScatterGather;
2860 CCB->DataLength = Count * sizeof(struct BusLogic_ScatterGatherSegment);
2861 if (BusLogic_MultiMasterHostAdapterP(HostAdapter))
2862 CCB->DataPointer = (unsigned int) CCB->DMA_Handle + ((unsigned long) &CCB->ScatterGatherList - (unsigned long) CCB);
2863 else
2864 CCB->DataPointer = Virtual_to_32Bit_Virtual(CCB->ScatterGatherList);
2865
2866 scsi_for_each_sg(Command, sg, Count, i) {
2867 CCB->ScatterGatherList[i].SegmentByteCount =
2868 sg_dma_len(sg);
2869 CCB->ScatterGatherList[i].SegmentDataPointer =
2870 sg_dma_address(sg);
2871 }
2872 } else if (!Count) {
2873 CCB->Opcode = BusLogic_InitiatorCCB;
2874 CCB->DataLength = BufferLength;
2875 CCB->DataPointer = 0;
2876 }
2877
2878 switch (CDB[0]) {
2879 case READ_6:
2880 case READ_10:
2881 CCB->DataDirection = BusLogic_DataInLengthChecked;
2882 TargetStatistics[TargetID].ReadCommands++;
2883 BusLogic_IncrementByteCounter(&TargetStatistics[TargetID].TotalBytesRead, BufferLength);
2884 BusLogic_IncrementSizeBucket(TargetStatistics[TargetID].ReadCommandSizeBuckets, BufferLength);
2885 break;
2886 case WRITE_6:
2887 case WRITE_10:
2888 CCB->DataDirection = BusLogic_DataOutLengthChecked;
2889 TargetStatistics[TargetID].WriteCommands++;
2890 BusLogic_IncrementByteCounter(&TargetStatistics[TargetID].TotalBytesWritten, BufferLength);
2891 BusLogic_IncrementSizeBucket(TargetStatistics[TargetID].WriteCommandSizeBuckets, BufferLength);
2892 break;
2893 default:
2894 CCB->DataDirection = BusLogic_UncheckedDataTransfer;
2895 break;
2896 }
2897 CCB->CDB_Length = CDB_Length;
2898 CCB->HostAdapterStatus = 0;
2899 CCB->TargetDeviceStatus = 0;
2900 CCB->TargetID = TargetID;
2901 CCB->LogicalUnit = LogicalUnit;
2902 CCB->TagEnable = false;
2903 CCB->LegacyTagEnable = false;
2904 /*
2905 BusLogic recommends that after a Reset the first couple of commands that
2906 are sent to a Target Device be sent in a non Tagged Queue fashion so that
2907 the Host Adapter and Target Device can establish Synchronous and Wide
2908 Transfer before Queue Tag messages can interfere with the Synchronous and
2909 Wide Negotiation messages. By waiting to enable Tagged Queuing until after
2910 the first BusLogic_MaxTaggedQueueDepth commands have been queued, it is
2911 assured that after a Reset any pending commands are requeued before Tagged
2912 Queuing is enabled and that the Tagged Queuing message will not occur while
2913 the partition table is being printed. In addition, some devices do not
2914 properly handle the transition from non-tagged to tagged commands, so it is
2915 necessary to wait until there are no pending commands for a target device
2916 before queuing tagged commands.
2917 */
2918 if (HostAdapter->CommandsSinceReset[TargetID]++ >=
2919 BusLogic_MaxTaggedQueueDepth && !TargetFlags->TaggedQueuingActive && HostAdapter->ActiveCommands[TargetID] == 0 && TargetFlags->TaggedQueuingSupported && (HostAdapter->TaggedQueuingPermitted & (1 << TargetID))) {
2920 TargetFlags->TaggedQueuingActive = true;
2921 BusLogic_Notice("Tagged Queuing now active for Target %d\n", HostAdapter, TargetID);
2922 }
2923 if (TargetFlags->TaggedQueuingActive) {
2924 enum BusLogic_QueueTag QueueTag = BusLogic_SimpleQueueTag;
2925 /*
2926 When using Tagged Queuing with Simple Queue Tags, it appears that disk
2927 drive controllers do not guarantee that a queued command will not
2928 remain in a disconnected state indefinitely if commands that read or
2929 write nearer the head position continue to arrive without interruption.
2930 Therefore, for each Target Device this driver keeps track of the last
2931 time either the queue was empty or an Ordered Queue Tag was issued. If
2932 more than 4 seconds (one fifth of the 20 second disk timeout) have
2933 elapsed since this last sequence point, this command will be issued
2934 with an Ordered Queue Tag rather than a Simple Queue Tag, which forces
2935 the Target Device to complete all previously queued commands before
2936 this command may be executed.
2937 */
2938 if (HostAdapter->ActiveCommands[TargetID] == 0)
2939 HostAdapter->LastSequencePoint[TargetID] = jiffies;
2940 else if (time_after(jiffies, HostAdapter->LastSequencePoint[TargetID] + 4 * HZ)) {
2941 HostAdapter->LastSequencePoint[TargetID] = jiffies;
2942 QueueTag = BusLogic_OrderedQueueTag;
2943 }
2944 if (HostAdapter->ExtendedLUNSupport) {
2945 CCB->TagEnable = true;
2946 CCB->QueueTag = QueueTag;
2947 } else {
2948 CCB->LegacyTagEnable = true;
2949 CCB->LegacyQueueTag = QueueTag;
2950 }
2951 }
2952 memcpy(CCB->CDB, CDB, CDB_Length);
2953 CCB->SenseDataLength = SCSI_SENSE_BUFFERSIZE;
2954 CCB->SenseDataPointer = pci_map_single(HostAdapter->PCI_Device, Command->sense_buffer, CCB->SenseDataLength, PCI_DMA_FROMDEVICE);
2955 CCB->Command = Command;
2956 Command->scsi_done = CompletionRoutine;
2957 if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
2958 /*
2959 Place the CCB in an Outgoing Mailbox. The higher levels of the SCSI
2960 Subsystem should not attempt to queue more commands than can be placed
2961 in Outgoing Mailboxes, so there should always be one free. In the
2962 unlikely event that there are none available, wait 1 second and try
2963 again. If that fails, the Host Adapter is probably hung so signal an
2964 error as a Host Adapter Hard Reset should be initiated soon.
2965 */
2966 if (!BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxStartCommand, CCB)) {
2967 spin_unlock_irq(HostAdapter->SCSI_Host->host_lock);
2968 BusLogic_Warning("Unable to write Outgoing Mailbox - " "Pausing for 1 second\n", HostAdapter);
2969 BusLogic_Delay(1);
2970 spin_lock_irq(HostAdapter->SCSI_Host->host_lock);
2971 if (!BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxStartCommand, CCB)) {
2972 BusLogic_Warning("Still unable to write Outgoing Mailbox - " "Host Adapter Dead?\n", HostAdapter);
2973 BusLogic_DeallocateCCB(CCB);
2974 Command->result = DID_ERROR << 16;
2975 Command->scsi_done(Command);
2976 }
2977 }
2978 } else {
2979 /*
2980 Call the FlashPoint SCCB Manager to start execution of the CCB.
2981 */
2982 CCB->Status = BusLogic_CCB_Active;
2983 HostAdapter->ActiveCommands[TargetID]++;
2984 TargetStatistics[TargetID].CommandsAttempted++;
2985 FlashPoint_StartCCB(HostAdapter->CardHandle, CCB);
2986 /*
2987 The Command may have already completed and BusLogic_QueueCompletedCCB
2988 been called, or it may still be pending.
2989 */
2990 if (CCB->Status == BusLogic_CCB_Completed)
2991 BusLogic_ProcessCompletedCCBs(HostAdapter);
2992 }
2993 return 0;
2994}
2995
2996static DEF_SCSI_QCMD(BusLogic_QueueCommand)
2997
2998#if 0
2999/*
3000 BusLogic_AbortCommand aborts Command if possible.
3001*/
3002
3003static int BusLogic_AbortCommand(struct scsi_cmnd *Command)
3004{
3005 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Command->device->host->hostdata;
3006
3007 int TargetID = Command->device->id;
3008 struct BusLogic_CCB *CCB;
3009 BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsRequested);
3010 /*
3011 Attempt to find an Active CCB for this Command. If no Active CCB for this
3012 Command is found, then no Abort is necessary.
3013 */
3014 for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll)
3015 if (CCB->Command == Command)
3016 break;
3017 if (CCB == NULL) {
3018 BusLogic_Warning("Unable to Abort Command to Target %d - " "No CCB Found\n", HostAdapter, TargetID);
3019 return SUCCESS;
3020 } else if (CCB->Status == BusLogic_CCB_Completed) {
3021 BusLogic_Warning("Unable to Abort Command to Target %d - " "CCB Completed\n", HostAdapter, TargetID);
3022 return SUCCESS;
3023 } else if (CCB->Status == BusLogic_CCB_Reset) {
3024 BusLogic_Warning("Unable to Abort Command to Target %d - " "CCB Reset\n", HostAdapter, TargetID);
3025 return SUCCESS;
3026 }
3027 if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
3028 /*
3029 Attempt to Abort this CCB. MultiMaster Firmware versions prior to 5.xx
3030 do not generate Abort Tag messages, but only generate the non-tagged
3031 Abort message. Since non-tagged commands are not sent by the Host
3032 Adapter until the queue of outstanding tagged commands has completed,
3033 and the Abort message is treated as a non-tagged command, it is
3034 effectively impossible to abort commands when Tagged Queuing is active.
3035 Firmware version 5.xx does generate Abort Tag messages, so it is
3036 possible to abort commands when Tagged Queuing is active.
3037 */
3038 if (HostAdapter->TargetFlags[TargetID].TaggedQueuingActive && HostAdapter->FirmwareVersion[0] < '5') {
3039 BusLogic_Warning("Unable to Abort CCB #%ld to Target %d - " "Abort Tag Not Supported\n", HostAdapter, CCB->SerialNumber, TargetID);
3040 return FAILURE;
3041 } else if (BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxAbortCommand, CCB)) {
3042 BusLogic_Warning("Aborting CCB #%ld to Target %d\n", HostAdapter, CCB->SerialNumber, TargetID);
3043 BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsAttempted);
3044 return SUCCESS;
3045 } else {
3046 BusLogic_Warning("Unable to Abort CCB #%ld to Target %d - " "No Outgoing Mailboxes\n", HostAdapter, CCB->SerialNumber, TargetID);
3047 return FAILURE;
3048 }
3049 } else {
3050 /*
3051 Call the FlashPoint SCCB Manager to abort execution of the CCB.
3052 */
3053 BusLogic_Warning("Aborting CCB #%ld to Target %d\n", HostAdapter, CCB->SerialNumber, TargetID);
3054 BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsAttempted);
3055 FlashPoint_AbortCCB(HostAdapter->CardHandle, CCB);
3056 /*
3057 The Abort may have already been completed and
3058 BusLogic_QueueCompletedCCB been called, or it
3059 may still be pending.
3060 */
3061 if (CCB->Status == BusLogic_CCB_Completed) {
3062 BusLogic_ProcessCompletedCCBs(HostAdapter);
3063 }
3064 return SUCCESS;
3065 }
3066 return SUCCESS;
3067}
3068
3069#endif
3070/*
3071 BusLogic_ResetHostAdapter resets Host Adapter if possible, marking all
3072 currently executing SCSI Commands as having been Reset.
3073*/
3074
3075static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *HostAdapter, bool HardReset)
3076{
3077 struct BusLogic_CCB *CCB;
3078 int TargetID;
3079
3080 /*
3081 * Attempt to Reset and Reinitialize the Host Adapter.
3082 */
3083
3084 if (!(BusLogic_HardwareResetHostAdapter(HostAdapter, HardReset) && BusLogic_InitializeHostAdapter(HostAdapter))) {
3085 BusLogic_Error("Resetting %s Failed\n", HostAdapter, HostAdapter->FullModelName);
3086 return FAILURE;
3087 }
3088
3089 /*
3090 * Deallocate all currently executing CCBs.
3091 */
3092
3093 for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll)
3094 if (CCB->Status == BusLogic_CCB_Active)
3095 BusLogic_DeallocateCCB(CCB);
3096 /*
3097 * Wait a few seconds between the Host Adapter Hard Reset which
3098 * initiates a SCSI Bus Reset and issuing any SCSI Commands. Some
3099 * SCSI devices get confused if they receive SCSI Commands too soon
3100 * after a SCSI Bus Reset.
3101 */
3102
3103 if (HardReset) {
3104 spin_unlock_irq(HostAdapter->SCSI_Host->host_lock);
3105 BusLogic_Delay(HostAdapter->BusSettleTime);
3106 spin_lock_irq(HostAdapter->SCSI_Host->host_lock);
3107 }
3108
3109 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3110 HostAdapter->LastResetAttempted[TargetID] = jiffies;
3111 HostAdapter->LastResetCompleted[TargetID] = jiffies;
3112 }
3113 return SUCCESS;
3114}
3115
3116/*
3117 BusLogic_BIOSDiskParameters returns the Heads/Sectors/Cylinders BIOS Disk
3118 Parameters for Disk. The default disk geometry is 64 heads, 32 sectors, and
3119 the appropriate number of cylinders so as not to exceed drive capacity. In
3120 order for disks equal to or larger than 1 GB to be addressable by the BIOS
3121 without exceeding the BIOS limitation of 1024 cylinders, Extended Translation
3122 may be enabled in AutoSCSI on FlashPoint Host Adapters and on "W" and "C"
3123 series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A"
3124 series MultiMaster Host Adapters. With Extended Translation enabled, drives
3125 between 1 GB inclusive and 2 GB exclusive are given a disk geometry of 128
3126 heads and 32 sectors, and drives above 2 GB inclusive are given a disk
3127 geometry of 255 heads and 63 sectors. However, if the BIOS detects that the
3128 Extended Translation setting does not match the geometry in the partition
3129 table, then the translation inferred from the partition table will be used by
3130 the BIOS, and a warning may be displayed.
3131*/
3132
3133static int BusLogic_BIOSDiskParameters(struct scsi_device *sdev, struct block_device *Device, sector_t capacity, int *Parameters)
3134{
3135 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) sdev->host->hostdata;
3136 struct BIOS_DiskParameters *DiskParameters = (struct BIOS_DiskParameters *) Parameters;
3137 unsigned char *buf;
3138 if (HostAdapter->ExtendedTranslationEnabled && capacity >= 2 * 1024 * 1024 /* 1 GB in 512 byte sectors */ ) {
3139 if (capacity >= 4 * 1024 * 1024 /* 2 GB in 512 byte sectors */ ) {
3140 DiskParameters->Heads = 255;
3141 DiskParameters->Sectors = 63;
3142 } else {
3143 DiskParameters->Heads = 128;
3144 DiskParameters->Sectors = 32;
3145 }
3146 } else {
3147 DiskParameters->Heads = 64;
3148 DiskParameters->Sectors = 32;
3149 }
3150 DiskParameters->Cylinders = (unsigned long) capacity / (DiskParameters->Heads * DiskParameters->Sectors);
3151 buf = scsi_bios_ptable(Device);
3152 if (buf == NULL)
3153 return 0;
3154 /*
3155 If the boot sector partition table flag is valid, search for a partition
3156 table entry whose end_head matches one of the standard BusLogic geometry
3157 translations (64/32, 128/32, or 255/63).
3158 */
3159 if (*(unsigned short *) (buf + 64) == 0xAA55) {
3160 struct partition *FirstPartitionEntry = (struct partition *) buf;
3161 struct partition *PartitionEntry = FirstPartitionEntry;
3162 int SavedCylinders = DiskParameters->Cylinders, PartitionNumber;
3163 unsigned char PartitionEntryEndHead = 0, PartitionEntryEndSector = 0;
3164 for (PartitionNumber = 0; PartitionNumber < 4; PartitionNumber++) {
3165 PartitionEntryEndHead = PartitionEntry->end_head;
3166 PartitionEntryEndSector = PartitionEntry->end_sector & 0x3F;
3167 if (PartitionEntryEndHead == 64 - 1) {
3168 DiskParameters->Heads = 64;
3169 DiskParameters->Sectors = 32;
3170 break;
3171 } else if (PartitionEntryEndHead == 128 - 1) {
3172 DiskParameters->Heads = 128;
3173 DiskParameters->Sectors = 32;
3174 break;
3175 } else if (PartitionEntryEndHead == 255 - 1) {
3176 DiskParameters->Heads = 255;
3177 DiskParameters->Sectors = 63;
3178 break;
3179 }
3180 PartitionEntry++;
3181 }
3182 if (PartitionNumber == 4) {
3183 PartitionEntryEndHead = FirstPartitionEntry->end_head;
3184 PartitionEntryEndSector = FirstPartitionEntry->end_sector & 0x3F;
3185 }
3186 DiskParameters->Cylinders = (unsigned long) capacity / (DiskParameters->Heads * DiskParameters->Sectors);
3187 if (PartitionNumber < 4 && PartitionEntryEndSector == DiskParameters->Sectors) {
3188 if (DiskParameters->Cylinders != SavedCylinders)
3189 BusLogic_Warning("Adopting Geometry %d/%d from Partition Table\n", HostAdapter, DiskParameters->Heads, DiskParameters->Sectors);
3190 } else if (PartitionEntryEndHead > 0 || PartitionEntryEndSector > 0) {
3191 BusLogic_Warning("Warning: Partition Table appears to " "have Geometry %d/%d which is\n", HostAdapter, PartitionEntryEndHead + 1, PartitionEntryEndSector);
3192 BusLogic_Warning("not compatible with current BusLogic " "Host Adapter Geometry %d/%d\n", HostAdapter, DiskParameters->Heads, DiskParameters->Sectors);
3193 }
3194 }
3195 kfree(buf);
3196 return 0;
3197}
3198
3199
3200/*
3201 BugLogic_ProcDirectoryInfo implements /proc/scsi/BusLogic/<N>.
3202*/
3203
3204static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *shost, char *ProcBuffer, char **StartPointer, off_t Offset, int BytesAvailable, int WriteFlag)
3205{
3206 struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) shost->hostdata;
3207 struct BusLogic_TargetStatistics *TargetStatistics;
3208 int TargetID, Length;
3209 char *Buffer;
3210
3211 TargetStatistics = HostAdapter->TargetStatistics;
3212 if (WriteFlag) {
3213 HostAdapter->ExternalHostAdapterResets = 0;
3214 HostAdapter->HostAdapterInternalErrors = 0;
3215 memset(TargetStatistics, 0, BusLogic_MaxTargetDevices * sizeof(struct BusLogic_TargetStatistics));
3216 return 0;
3217 }
3218 Buffer = HostAdapter->MessageBuffer;
3219 Length = HostAdapter->MessageBufferLength;
3220 Length += sprintf(&Buffer[Length], "\n\
3221Current Driver Queue Depth: %d\n\
3222Currently Allocated CCBs: %d\n", HostAdapter->DriverQueueDepth, HostAdapter->AllocatedCCBs);
3223 Length += sprintf(&Buffer[Length], "\n\n\
3224 DATA TRANSFER STATISTICS\n\
3225\n\
3226Target Tagged Queuing Queue Depth Active Attempted Completed\n\
3227====== ============== =========== ====== ========= =========\n");
3228 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3229 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
3230 if (!TargetFlags->TargetExists)
3231 continue;
3232 Length += sprintf(&Buffer[Length], " %2d %s", TargetID, (TargetFlags->TaggedQueuingSupported ? (TargetFlags->TaggedQueuingActive ? " Active" : (HostAdapter->TaggedQueuingPermitted & (1 << TargetID)
3233 ? " Permitted" : " Disabled"))
3234 : "Not Supported"));
3235 Length += sprintf(&Buffer[Length],
3236 " %3d %3u %9u %9u\n", HostAdapter->QueueDepth[TargetID], HostAdapter->ActiveCommands[TargetID], TargetStatistics[TargetID].CommandsAttempted, TargetStatistics[TargetID].CommandsCompleted);
3237 }
3238 Length += sprintf(&Buffer[Length], "\n\
3239Target Read Commands Write Commands Total Bytes Read Total Bytes Written\n\
3240====== ============= ============== =================== ===================\n");
3241 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3242 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
3243 if (!TargetFlags->TargetExists)
3244 continue;
3245 Length += sprintf(&Buffer[Length], " %2d %9u %9u", TargetID, TargetStatistics[TargetID].ReadCommands, TargetStatistics[TargetID].WriteCommands);
3246 if (TargetStatistics[TargetID].TotalBytesRead.Billions > 0)
3247 Length += sprintf(&Buffer[Length], " %9u%09u", TargetStatistics[TargetID].TotalBytesRead.Billions, TargetStatistics[TargetID].TotalBytesRead.Units);
3248 else
3249 Length += sprintf(&Buffer[Length], " %9u", TargetStatistics[TargetID].TotalBytesRead.Units);
3250 if (TargetStatistics[TargetID].TotalBytesWritten.Billions > 0)
3251 Length += sprintf(&Buffer[Length], " %9u%09u\n", TargetStatistics[TargetID].TotalBytesWritten.Billions, TargetStatistics[TargetID].TotalBytesWritten.Units);
3252 else
3253 Length += sprintf(&Buffer[Length], " %9u\n", TargetStatistics[TargetID].TotalBytesWritten.Units);
3254 }
3255 Length += sprintf(&Buffer[Length], "\n\
3256Target Command 0-1KB 1-2KB 2-4KB 4-8KB 8-16KB\n\
3257====== ======= ========= ========= ========= ========= =========\n");
3258 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3259 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
3260 if (!TargetFlags->TargetExists)
3261 continue;
3262 Length +=
3263 sprintf(&Buffer[Length],
3264 " %2d Read %9u %9u %9u %9u %9u\n", TargetID,
3265 TargetStatistics[TargetID].ReadCommandSizeBuckets[0],
3266 TargetStatistics[TargetID].ReadCommandSizeBuckets[1], TargetStatistics[TargetID].ReadCommandSizeBuckets[2], TargetStatistics[TargetID].ReadCommandSizeBuckets[3], TargetStatistics[TargetID].ReadCommandSizeBuckets[4]);
3267 Length +=
3268 sprintf(&Buffer[Length],
3269 " %2d Write %9u %9u %9u %9u %9u\n", TargetID,
3270 TargetStatistics[TargetID].WriteCommandSizeBuckets[0],
3271 TargetStatistics[TargetID].WriteCommandSizeBuckets[1], TargetStatistics[TargetID].WriteCommandSizeBuckets[2], TargetStatistics[TargetID].WriteCommandSizeBuckets[3], TargetStatistics[TargetID].WriteCommandSizeBuckets[4]);
3272 }
3273 Length += sprintf(&Buffer[Length], "\n\
3274Target Command 16-32KB 32-64KB 64-128KB 128-256KB 256KB+\n\
3275====== ======= ========= ========= ========= ========= =========\n");
3276 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3277 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
3278 if (!TargetFlags->TargetExists)
3279 continue;
3280 Length +=
3281 sprintf(&Buffer[Length],
3282 " %2d Read %9u %9u %9u %9u %9u\n", TargetID,
3283 TargetStatistics[TargetID].ReadCommandSizeBuckets[5],
3284 TargetStatistics[TargetID].ReadCommandSizeBuckets[6], TargetStatistics[TargetID].ReadCommandSizeBuckets[7], TargetStatistics[TargetID].ReadCommandSizeBuckets[8], TargetStatistics[TargetID].ReadCommandSizeBuckets[9]);
3285 Length +=
3286 sprintf(&Buffer[Length],
3287 " %2d Write %9u %9u %9u %9u %9u\n", TargetID,
3288 TargetStatistics[TargetID].WriteCommandSizeBuckets[5],
3289 TargetStatistics[TargetID].WriteCommandSizeBuckets[6], TargetStatistics[TargetID].WriteCommandSizeBuckets[7], TargetStatistics[TargetID].WriteCommandSizeBuckets[8], TargetStatistics[TargetID].WriteCommandSizeBuckets[9]);
3290 }
3291 Length += sprintf(&Buffer[Length], "\n\n\
3292 ERROR RECOVERY STATISTICS\n\
3293\n\
3294 Command Aborts Bus Device Resets Host Adapter Resets\n\
3295Target Requested Completed Requested Completed Requested Completed\n\
3296 ID \\\\\\\\ Attempted //// \\\\\\\\ Attempted //// \\\\\\\\ Attempted ////\n\
3297====== ===== ===== ===== ===== ===== ===== ===== ===== =====\n");
3298 for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
3299 struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
3300 if (!TargetFlags->TargetExists)
3301 continue;
3302 Length += sprintf(&Buffer[Length], "\
3303 %2d %5d %5d %5d %5d %5d %5d %5d %5d %5d\n", TargetID, TargetStatistics[TargetID].CommandAbortsRequested, TargetStatistics[TargetID].CommandAbortsAttempted, TargetStatistics[TargetID].CommandAbortsCompleted, TargetStatistics[TargetID].BusDeviceResetsRequested, TargetStatistics[TargetID].BusDeviceResetsAttempted, TargetStatistics[TargetID].BusDeviceResetsCompleted, TargetStatistics[TargetID].HostAdapterResetsRequested, TargetStatistics[TargetID].HostAdapterResetsAttempted, TargetStatistics[TargetID].HostAdapterResetsCompleted);
3304 }
3305 Length += sprintf(&Buffer[Length], "\nExternal Host Adapter Resets: %d\n", HostAdapter->ExternalHostAdapterResets);
3306 Length += sprintf(&Buffer[Length], "Host Adapter Internal Errors: %d\n", HostAdapter->HostAdapterInternalErrors);
3307 if (Length >= BusLogic_MessageBufferSize)
3308 BusLogic_Error("Message Buffer length %d exceeds size %d\n", HostAdapter, Length, BusLogic_MessageBufferSize);
3309 if ((Length -= Offset) <= 0)
3310 return 0;
3311 if (Length >= BytesAvailable)
3312 Length = BytesAvailable;
3313 memcpy(ProcBuffer, HostAdapter->MessageBuffer + Offset, Length);
3314 *StartPointer = ProcBuffer;
3315 return Length;
3316}
3317
3318
3319/*
3320 BusLogic_Message prints Driver Messages.
3321*/
3322
3323static void BusLogic_Message(enum BusLogic_MessageLevel MessageLevel, char *Format, struct BusLogic_HostAdapter *HostAdapter, ...)
3324{
3325 static char Buffer[BusLogic_LineBufferSize];
3326 static bool BeginningOfLine = true;
3327 va_list Arguments;
3328 int Length = 0;
3329 va_start(Arguments, HostAdapter);
3330 Length = vsprintf(Buffer, Format, Arguments);
3331 va_end(Arguments);
3332 if (MessageLevel == BusLogic_AnnounceLevel) {
3333 static int AnnouncementLines = 0;
3334 strcpy(&HostAdapter->MessageBuffer[HostAdapter->MessageBufferLength], Buffer);
3335 HostAdapter->MessageBufferLength += Length;
3336 if (++AnnouncementLines <= 2)
3337 printk("%sscsi: %s", BusLogic_MessageLevelMap[MessageLevel], Buffer);
3338 } else if (MessageLevel == BusLogic_InfoLevel) {
3339 strcpy(&HostAdapter->MessageBuffer[HostAdapter->MessageBufferLength], Buffer);
3340 HostAdapter->MessageBufferLength += Length;
3341 if (BeginningOfLine) {
3342 if (Buffer[0] != '\n' || Length > 1)
3343 printk("%sscsi%d: %s", BusLogic_MessageLevelMap[MessageLevel], HostAdapter->HostNumber, Buffer);
3344 } else
3345 printk("%s", Buffer);
3346 } else {
3347 if (BeginningOfLine) {
3348 if (HostAdapter != NULL && HostAdapter->HostAdapterInitialized)
3349 printk("%sscsi%d: %s", BusLogic_MessageLevelMap[MessageLevel], HostAdapter->HostNumber, Buffer);
3350 else
3351 printk("%s%s", BusLogic_MessageLevelMap[MessageLevel], Buffer);
3352 } else
3353 printk("%s", Buffer);
3354 }
3355 BeginningOfLine = (Buffer[Length - 1] == '\n');
3356}
3357
3358
3359/*
3360 BusLogic_ParseKeyword parses an individual option keyword. It returns true
3361 and updates the pointer if the keyword is recognized and false otherwise.
3362*/
3363
3364static bool __init BusLogic_ParseKeyword(char **StringPointer, char *Keyword)
3365{
3366 char *Pointer = *StringPointer;
3367 while (*Keyword != '\0') {
3368 char StringChar = *Pointer++;
3369 char KeywordChar = *Keyword++;
3370 if (StringChar >= 'A' && StringChar <= 'Z')
3371 StringChar += 'a' - 'Z';
3372 if (KeywordChar >= 'A' && KeywordChar <= 'Z')
3373 KeywordChar += 'a' - 'Z';
3374 if (StringChar != KeywordChar)
3375 return false;
3376 }
3377 *StringPointer = Pointer;
3378 return true;
3379}
3380
3381
3382/*
3383 BusLogic_ParseDriverOptions handles processing of BusLogic Driver Options
3384 specifications.
3385
3386 BusLogic Driver Options may be specified either via the Linux Kernel Command
3387 Line or via the Loadable Kernel Module Installation Facility. Driver Options
3388 for multiple host adapters may be specified either by separating the option
3389 strings by a semicolon, or by specifying multiple "BusLogic=" strings on the
3390 command line. Individual option specifications for a single host adapter are
3391 separated by commas. The Probing and Debugging Options apply to all host
3392 adapters whereas the remaining options apply individually only to the
3393 selected host adapter.
3394
3395 The BusLogic Driver Probing Options are described in
3396 <file:Documentation/scsi/BusLogic.txt>.
3397*/
3398
3399static int __init BusLogic_ParseDriverOptions(char *OptionsString)
3400{
3401 while (true) {
3402 struct BusLogic_DriverOptions *DriverOptions = &BusLogic_DriverOptions[BusLogic_DriverOptionsCount++];
3403 int TargetID;
3404 memset(DriverOptions, 0, sizeof(struct BusLogic_DriverOptions));
3405 while (*OptionsString != '\0' && *OptionsString != ';') {
3406 /* Probing Options. */
3407 if (BusLogic_ParseKeyword(&OptionsString, "IO:")) {
3408 unsigned long IO_Address = simple_strtoul(OptionsString, &OptionsString, 0);
3409 BusLogic_ProbeOptions.LimitedProbeISA = true;
3410 switch (IO_Address) {
3411 case 0x330:
3412 BusLogic_ProbeOptions.Probe330 = true;
3413 break;
3414 case 0x334:
3415 BusLogic_ProbeOptions.Probe334 = true;
3416 break;
3417 case 0x230:
3418 BusLogic_ProbeOptions.Probe230 = true;
3419 break;
3420 case 0x234:
3421 BusLogic_ProbeOptions.Probe234 = true;
3422 break;
3423 case 0x130:
3424 BusLogic_ProbeOptions.Probe130 = true;
3425 break;
3426 case 0x134:
3427 BusLogic_ProbeOptions.Probe134 = true;
3428 break;
3429 default:
3430 BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid I/O Address 0x%X)\n", NULL, IO_Address);
3431 return 0;
3432 }
3433 } else if (BusLogic_ParseKeyword(&OptionsString, "NoProbeISA"))
3434 BusLogic_ProbeOptions.NoProbeISA = true;
3435 else if (BusLogic_ParseKeyword(&OptionsString, "NoProbePCI"))
3436 BusLogic_ProbeOptions.NoProbePCI = true;
3437 else if (BusLogic_ParseKeyword(&OptionsString, "NoProbe"))
3438 BusLogic_ProbeOptions.NoProbe = true;
3439 else if (BusLogic_ParseKeyword(&OptionsString, "NoSortPCI"))
3440 BusLogic_ProbeOptions.NoSortPCI = true;
3441 else if (BusLogic_ParseKeyword(&OptionsString, "MultiMasterFirst"))
3442 BusLogic_ProbeOptions.MultiMasterFirst = true;
3443 else if (BusLogic_ParseKeyword(&OptionsString, "FlashPointFirst"))
3444 BusLogic_ProbeOptions.FlashPointFirst = true;
3445 /* Tagged Queuing Options. */
3446 else if (BusLogic_ParseKeyword(&OptionsString, "QueueDepth:[") || BusLogic_ParseKeyword(&OptionsString, "QD:[")) {
3447 for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++) {
3448 unsigned short QueueDepth = simple_strtoul(OptionsString, &OptionsString, 0);
3449 if (QueueDepth > BusLogic_MaxTaggedQueueDepth) {
3450 BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, QueueDepth);
3451 return 0;
3452 }
3453 DriverOptions->QueueDepth[TargetID] = QueueDepth;
3454 if (*OptionsString == ',')
3455 OptionsString++;
3456 else if (*OptionsString == ']')
3457 break;
3458 else {
3459 BusLogic_Error("BusLogic: Invalid Driver Options " "(',' or ']' expected at '%s')\n", NULL, OptionsString);
3460 return 0;
3461 }
3462 }
3463 if (*OptionsString != ']') {
3464 BusLogic_Error("BusLogic: Invalid Driver Options " "(']' expected at '%s')\n", NULL, OptionsString);
3465 return 0;
3466 } else
3467 OptionsString++;
3468 } else if (BusLogic_ParseKeyword(&OptionsString, "QueueDepth:") || BusLogic_ParseKeyword(&OptionsString, "QD:")) {
3469 unsigned short QueueDepth = simple_strtoul(OptionsString, &OptionsString, 0);
3470 if (QueueDepth == 0 || QueueDepth > BusLogic_MaxTaggedQueueDepth) {
3471 BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, QueueDepth);
3472 return 0;
3473 }
3474 DriverOptions->CommonQueueDepth = QueueDepth;
3475 for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++)
3476 DriverOptions->QueueDepth[TargetID] = QueueDepth;
3477 } else if (BusLogic_ParseKeyword(&OptionsString, "TaggedQueuing:") || BusLogic_ParseKeyword(&OptionsString, "TQ:")) {
3478 if (BusLogic_ParseKeyword(&OptionsString, "Default")) {
3479 DriverOptions->TaggedQueuingPermitted = 0x0000;
3480 DriverOptions->TaggedQueuingPermittedMask = 0x0000;
3481 } else if (BusLogic_ParseKeyword(&OptionsString, "Enable")) {
3482 DriverOptions->TaggedQueuingPermitted = 0xFFFF;
3483 DriverOptions->TaggedQueuingPermittedMask = 0xFFFF;
3484 } else if (BusLogic_ParseKeyword(&OptionsString, "Disable")) {
3485 DriverOptions->TaggedQueuingPermitted = 0x0000;
3486 DriverOptions->TaggedQueuingPermittedMask = 0xFFFF;
3487 } else {
3488 unsigned short TargetBit;
3489 for (TargetID = 0, TargetBit = 1; TargetID < BusLogic_MaxTargetDevices; TargetID++, TargetBit <<= 1)
3490 switch (*OptionsString++) {
3491 case 'Y':
3492 DriverOptions->TaggedQueuingPermitted |= TargetBit;
3493 DriverOptions->TaggedQueuingPermittedMask |= TargetBit;
3494 break;
3495 case 'N':
3496 DriverOptions->TaggedQueuingPermitted &= ~TargetBit;
3497 DriverOptions->TaggedQueuingPermittedMask |= TargetBit;
3498 break;
3499 case 'X':
3500 break;
3501 default:
3502 OptionsString--;
3503 TargetID = BusLogic_MaxTargetDevices;
3504 break;
3505 }
3506 }
3507 }
3508 /* Miscellaneous Options. */
3509 else if (BusLogic_ParseKeyword(&OptionsString, "BusSettleTime:") || BusLogic_ParseKeyword(&OptionsString, "BST:")) {
3510 unsigned short BusSettleTime = simple_strtoul(OptionsString, &OptionsString, 0);
3511 if (BusSettleTime > 5 * 60) {
3512 BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid Bus Settle Time %d)\n", NULL, BusSettleTime);
3513 return 0;
3514 }
3515 DriverOptions->BusSettleTime = BusSettleTime;
3516 } else if (BusLogic_ParseKeyword(&OptionsString, "InhibitTargetInquiry"))
3517 DriverOptions->LocalOptions.InhibitTargetInquiry = true;
3518 /* Debugging Options. */
3519 else if (BusLogic_ParseKeyword(&OptionsString, "TraceProbe"))
3520 BusLogic_GlobalOptions.TraceProbe = true;
3521 else if (BusLogic_ParseKeyword(&OptionsString, "TraceHardwareReset"))
3522 BusLogic_GlobalOptions.TraceHardwareReset = true;
3523 else if (BusLogic_ParseKeyword(&OptionsString, "TraceConfiguration"))
3524 BusLogic_GlobalOptions.TraceConfiguration = true;
3525 else if (BusLogic_ParseKeyword(&OptionsString, "TraceErrors"))
3526 BusLogic_GlobalOptions.TraceErrors = true;
3527 else if (BusLogic_ParseKeyword(&OptionsString, "Debug")) {
3528 BusLogic_GlobalOptions.TraceProbe = true;
3529 BusLogic_GlobalOptions.TraceHardwareReset = true;
3530 BusLogic_GlobalOptions.TraceConfiguration = true;
3531 BusLogic_GlobalOptions.TraceErrors = true;
3532 }
3533 if (*OptionsString == ',')
3534 OptionsString++;
3535 else if (*OptionsString != ';' && *OptionsString != '\0') {
3536 BusLogic_Error("BusLogic: Unexpected Driver Option '%s' " "ignored\n", NULL, OptionsString);
3537 *OptionsString = '\0';
3538 }
3539 }
3540 if (!(BusLogic_DriverOptionsCount == 0 || BusLogic_ProbeInfoCount == 0 || BusLogic_DriverOptionsCount == BusLogic_ProbeInfoCount)) {
3541 BusLogic_Error("BusLogic: Invalid Driver Options " "(all or no I/O Addresses must be specified)\n", NULL);
3542 return 0;
3543 }
3544 /*
3545 Tagged Queuing is disabled when the Queue Depth is 1 since queuing
3546 multiple commands is not possible.
3547 */
3548 for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++)
3549 if (DriverOptions->QueueDepth[TargetID] == 1) {
3550 unsigned short TargetBit = 1 << TargetID;
3551 DriverOptions->TaggedQueuingPermitted &= ~TargetBit;
3552 DriverOptions->TaggedQueuingPermittedMask |= TargetBit;
3553 }
3554 if (*OptionsString == ';')
3555 OptionsString++;
3556 if (*OptionsString == '\0')
3557 return 0;
3558 }
3559 return 1;
3560}
3561
3562/*
3563 Get it all started
3564*/
3565
3566static struct scsi_host_template Bus_Logic_template = {
3567 .module = THIS_MODULE,
3568 .proc_name = "BusLogic",
3569 .proc_info = BusLogic_ProcDirectoryInfo,
3570 .name = "BusLogic",
3571 .info = BusLogic_DriverInfo,
3572 .queuecommand = BusLogic_QueueCommand,
3573 .slave_configure = BusLogic_SlaveConfigure,
3574 .bios_param = BusLogic_BIOSDiskParameters,
3575 .eh_host_reset_handler = BusLogic_host_reset,
3576#if 0
3577 .eh_abort_handler = BusLogic_AbortCommand,
3578#endif
3579 .unchecked_isa_dma = 1,
3580 .max_sectors = 128,
3581 .use_clustering = ENABLE_CLUSTERING,
3582};
3583
3584/*
3585 BusLogic_Setup handles processing of Kernel Command Line Arguments.
3586*/
3587
3588static int __init BusLogic_Setup(char *str)
3589{
3590 int ints[3];
3591
3592 (void) get_options(str, ARRAY_SIZE(ints), ints);
3593
3594 if (ints[0] != 0) {
3595 BusLogic_Error("BusLogic: Obsolete Command Line Entry " "Format Ignored\n", NULL);
3596 return 0;
3597 }
3598 if (str == NULL || *str == '\0')
3599 return 0;
3600 return BusLogic_ParseDriverOptions(str);
3601}
3602
3603/*
3604 * Exit function. Deletes all hosts associated with this driver.
3605 */
3606
3607static void __exit BusLogic_exit(void)
3608{
3609 struct BusLogic_HostAdapter *ha, *next;
3610
3611 list_for_each_entry_safe(ha, next, &BusLogic_host_list, host_list)
3612 BusLogic_ReleaseHostAdapter(ha);
3613}
3614
3615__setup("BusLogic=", BusLogic_Setup);
3616
3617#ifdef MODULE
3618static struct pci_device_id BusLogic_pci_tbl[] __devinitdata = {
3619 { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER,
3620 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
3621 { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC,
3622 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
3623 { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT,
3624 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
3625 { }
3626};
3627#endif
3628MODULE_DEVICE_TABLE(pci, BusLogic_pci_tbl);
3629
3630module_init(BusLogic_init);
3631module_exit(BusLogic_exit);