Loading...
1/*
2 * slip.c This module implements the SLIP protocol for kernel-based
3 * devices like TTY. It interfaces between a raw TTY, and the
4 * kernel's INET protocol layers.
5 *
6 * Version: @(#)slip.c 0.8.3 12/24/94
7 *
8 * Authors: Laurence Culhane, <loz@holmes.demon.co.uk>
9 * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
10 *
11 * Fixes:
12 * Alan Cox : Sanity checks and avoid tx overruns.
13 * Has a new sl->mtu field.
14 * Alan Cox : Found cause of overrun. ifconfig sl0
15 * mtu upwards. Driver now spots this
16 * and grows/shrinks its buffers(hack!).
17 * Memory leak if you run out of memory
18 * setting up a slip driver fixed.
19 * Matt Dillon : Printable slip (borrowed from NET2E)
20 * Pauline Middelink : Slip driver fixes.
21 * Alan Cox : Honours the old SL_COMPRESSED flag
22 * Alan Cox : KISS AX.25 and AXUI IP support
23 * Michael Riepe : Automatic CSLIP recognition added
24 * Charles Hedrick : CSLIP header length problem fix.
25 * Alan Cox : Corrected non-IP cases of the above.
26 * Alan Cox : Now uses hardware type as per FvK.
27 * Alan Cox : Default to 192.168.0.0 (RFC 1597)
28 * A.N.Kuznetsov : dev_tint() recursion fix.
29 * Dmitry Gorodchanin : SLIP memory leaks
30 * Dmitry Gorodchanin : Code cleanup. Reduce tty driver
31 * buffering from 4096 to 256 bytes.
32 * Improving SLIP response time.
33 * CONFIG_SLIP_MODE_SLIP6.
34 * ifconfig sl? up & down now works
35 * correctly.
36 * Modularization.
37 * Alan Cox : Oops - fix AX.25 buffer lengths
38 * Dmitry Gorodchanin : Even more cleanups. Preserve CSLIP
39 * statistics. Include CSLIP code only
40 * if it really needed.
41 * Alan Cox : Free slhc buffers in the right place.
42 * Alan Cox : Allow for digipeated IP over AX.25
43 * Matti Aarnio : Dynamic SLIP devices, with ideas taken
44 * from Jim Freeman's <jfree@caldera.com>
45 * dynamic PPP devices. We do NOT kfree()
46 * device entries, just reg./unreg. them
47 * as they are needed. We kfree() them
48 * at module cleanup.
49 * With MODULE-loading ``insmod'', user
50 * can issue parameter: slip_maxdev=1024
51 * (Or how much he/she wants.. Default
52 * is 256)
53 * Stanislav Voronyi : Slip line checking, with ideas taken
54 * from multislip BSDI driver which was
55 * written by Igor Chechik, RELCOM Corp.
56 * Only algorithms have been ported to
57 * Linux SLIP driver.
58 * Vitaly E. Lavrov : Sane behaviour on tty hangup.
59 * Alexey Kuznetsov : Cleanup interfaces to tty & netdevice
60 * modules.
61 */
62
63#define SL_CHECK_TRANSMIT
64#include <linux/module.h>
65#include <linux/moduleparam.h>
66
67#include <linux/uaccess.h>
68#include <linux/bitops.h>
69#include <linux/sched/signal.h>
70#include <linux/string.h>
71#include <linux/mm.h>
72#include <linux/interrupt.h>
73#include <linux/in.h>
74#include <linux/tty.h>
75#include <linux/errno.h>
76#include <linux/netdevice.h>
77#include <linux/etherdevice.h>
78#include <linux/skbuff.h>
79#include <linux/rtnetlink.h>
80#include <linux/if_arp.h>
81#include <linux/if_slip.h>
82#include <linux/compat.h>
83#include <linux/delay.h>
84#include <linux/init.h>
85#include <linux/slab.h>
86#include <linux/workqueue.h>
87#include "slip.h"
88#ifdef CONFIG_INET
89#include <linux/ip.h>
90#include <linux/tcp.h>
91#include <net/slhc_vj.h>
92#endif
93
94#define SLIP_VERSION "0.8.4-NET3.019-NEWTTY"
95
96static struct net_device **slip_devs;
97
98static int slip_maxdev = SL_NRUNIT;
99module_param(slip_maxdev, int, 0);
100MODULE_PARM_DESC(slip_maxdev, "Maximum number of slip devices");
101
102static int slip_esc(unsigned char *p, unsigned char *d, int len);
103static void slip_unesc(struct slip *sl, unsigned char c);
104#ifdef CONFIG_SLIP_MODE_SLIP6
105static int slip_esc6(unsigned char *p, unsigned char *d, int len);
106static void slip_unesc6(struct slip *sl, unsigned char c);
107#endif
108#ifdef CONFIG_SLIP_SMART
109static void sl_keepalive(struct timer_list *t);
110static void sl_outfill(struct timer_list *t);
111static int sl_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
112#endif
113
114/********************************
115* Buffer administration routines:
116* sl_alloc_bufs()
117* sl_free_bufs()
118* sl_realloc_bufs()
119*
120* NOTE: sl_realloc_bufs != sl_free_bufs + sl_alloc_bufs, because
121* sl_realloc_bufs provides strong atomicity and reallocation
122* on actively running device.
123*********************************/
124
125/*
126 Allocate channel buffers.
127 */
128
129static int sl_alloc_bufs(struct slip *sl, int mtu)
130{
131 int err = -ENOBUFS;
132 unsigned long len;
133 char *rbuff = NULL;
134 char *xbuff = NULL;
135#ifdef SL_INCLUDE_CSLIP
136 char *cbuff = NULL;
137 struct slcompress *slcomp = NULL;
138#endif
139
140 /*
141 * Allocate the SLIP frame buffers:
142 *
143 * rbuff Receive buffer.
144 * xbuff Transmit buffer.
145 * cbuff Temporary compression buffer.
146 */
147 len = mtu * 2;
148
149 /*
150 * allow for arrival of larger UDP packets, even if we say not to
151 * also fixes a bug in which SunOS sends 512-byte packets even with
152 * an MSS of 128
153 */
154 if (len < 576 * 2)
155 len = 576 * 2;
156 rbuff = kmalloc(len + 4, GFP_KERNEL);
157 if (rbuff == NULL)
158 goto err_exit;
159 xbuff = kmalloc(len + 4, GFP_KERNEL);
160 if (xbuff == NULL)
161 goto err_exit;
162#ifdef SL_INCLUDE_CSLIP
163 cbuff = kmalloc(len + 4, GFP_KERNEL);
164 if (cbuff == NULL)
165 goto err_exit;
166 slcomp = slhc_init(16, 16);
167 if (IS_ERR(slcomp))
168 goto err_exit;
169#endif
170 spin_lock_bh(&sl->lock);
171 if (sl->tty == NULL) {
172 spin_unlock_bh(&sl->lock);
173 err = -ENODEV;
174 goto err_exit;
175 }
176 sl->mtu = mtu;
177 sl->buffsize = len;
178 sl->rcount = 0;
179 sl->xleft = 0;
180 rbuff = xchg(&sl->rbuff, rbuff);
181 xbuff = xchg(&sl->xbuff, xbuff);
182#ifdef SL_INCLUDE_CSLIP
183 cbuff = xchg(&sl->cbuff, cbuff);
184 slcomp = xchg(&sl->slcomp, slcomp);
185#endif
186#ifdef CONFIG_SLIP_MODE_SLIP6
187 sl->xdata = 0;
188 sl->xbits = 0;
189#endif
190 spin_unlock_bh(&sl->lock);
191 err = 0;
192
193 /* Cleanup */
194err_exit:
195#ifdef SL_INCLUDE_CSLIP
196 kfree(cbuff);
197 slhc_free(slcomp);
198#endif
199 kfree(xbuff);
200 kfree(rbuff);
201 return err;
202}
203
204/* Free a SLIP channel buffers. */
205static void sl_free_bufs(struct slip *sl)
206{
207 /* Free all SLIP frame buffers. */
208 kfree(xchg(&sl->rbuff, NULL));
209 kfree(xchg(&sl->xbuff, NULL));
210#ifdef SL_INCLUDE_CSLIP
211 kfree(xchg(&sl->cbuff, NULL));
212 slhc_free(xchg(&sl->slcomp, NULL));
213#endif
214}
215
216/*
217 Reallocate slip channel buffers.
218 */
219
220static int sl_realloc_bufs(struct slip *sl, int mtu)
221{
222 int err = 0;
223 struct net_device *dev = sl->dev;
224 unsigned char *xbuff, *rbuff;
225#ifdef SL_INCLUDE_CSLIP
226 unsigned char *cbuff;
227#endif
228 int len = mtu * 2;
229
230/*
231 * allow for arrival of larger UDP packets, even if we say not to
232 * also fixes a bug in which SunOS sends 512-byte packets even with
233 * an MSS of 128
234 */
235 if (len < 576 * 2)
236 len = 576 * 2;
237
238 xbuff = kmalloc(len + 4, GFP_ATOMIC);
239 rbuff = kmalloc(len + 4, GFP_ATOMIC);
240#ifdef SL_INCLUDE_CSLIP
241 cbuff = kmalloc(len + 4, GFP_ATOMIC);
242#endif
243
244
245#ifdef SL_INCLUDE_CSLIP
246 if (xbuff == NULL || rbuff == NULL || cbuff == NULL) {
247#else
248 if (xbuff == NULL || rbuff == NULL) {
249#endif
250 if (mtu > sl->mtu) {
251 printk(KERN_WARNING "%s: unable to grow slip buffers, MTU change cancelled.\n",
252 dev->name);
253 err = -ENOBUFS;
254 }
255 goto done;
256 }
257 spin_lock_bh(&sl->lock);
258
259 err = -ENODEV;
260 if (sl->tty == NULL)
261 goto done_on_bh;
262
263 xbuff = xchg(&sl->xbuff, xbuff);
264 rbuff = xchg(&sl->rbuff, rbuff);
265#ifdef SL_INCLUDE_CSLIP
266 cbuff = xchg(&sl->cbuff, cbuff);
267#endif
268 if (sl->xleft) {
269 if (sl->xleft <= len) {
270 memcpy(sl->xbuff, sl->xhead, sl->xleft);
271 } else {
272 sl->xleft = 0;
273 dev->stats.tx_dropped++;
274 }
275 }
276 sl->xhead = sl->xbuff;
277
278 if (sl->rcount) {
279 if (sl->rcount <= len) {
280 memcpy(sl->rbuff, rbuff, sl->rcount);
281 } else {
282 sl->rcount = 0;
283 dev->stats.rx_over_errors++;
284 set_bit(SLF_ERROR, &sl->flags);
285 }
286 }
287 sl->mtu = mtu;
288 dev->mtu = mtu;
289 sl->buffsize = len;
290 err = 0;
291
292done_on_bh:
293 spin_unlock_bh(&sl->lock);
294
295done:
296 kfree(xbuff);
297 kfree(rbuff);
298#ifdef SL_INCLUDE_CSLIP
299 kfree(cbuff);
300#endif
301 return err;
302}
303
304
305/* Set the "sending" flag. This must be atomic hence the set_bit. */
306static inline void sl_lock(struct slip *sl)
307{
308 netif_stop_queue(sl->dev);
309}
310
311
312/* Clear the "sending" flag. This must be atomic, hence the ASM. */
313static inline void sl_unlock(struct slip *sl)
314{
315 netif_wake_queue(sl->dev);
316}
317
318/* Send one completely decapsulated IP datagram to the IP layer. */
319static void sl_bump(struct slip *sl)
320{
321 struct net_device *dev = sl->dev;
322 struct sk_buff *skb;
323 int count;
324
325 count = sl->rcount;
326#ifdef SL_INCLUDE_CSLIP
327 if (sl->mode & (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) {
328 unsigned char c = sl->rbuff[0];
329 if (c & SL_TYPE_COMPRESSED_TCP) {
330 /* ignore compressed packets when CSLIP is off */
331 if (!(sl->mode & SL_MODE_CSLIP)) {
332 printk(KERN_WARNING "%s: compressed packet ignored\n", dev->name);
333 return;
334 }
335 /* make sure we've reserved enough space for uncompress
336 to use */
337 if (count + 80 > sl->buffsize) {
338 dev->stats.rx_over_errors++;
339 return;
340 }
341 count = slhc_uncompress(sl->slcomp, sl->rbuff, count);
342 if (count <= 0)
343 return;
344 } else if (c >= SL_TYPE_UNCOMPRESSED_TCP) {
345 if (!(sl->mode & SL_MODE_CSLIP)) {
346 /* turn on header compression */
347 sl->mode |= SL_MODE_CSLIP;
348 sl->mode &= ~SL_MODE_ADAPTIVE;
349 printk(KERN_INFO "%s: header compression turned on\n", dev->name);
350 }
351 sl->rbuff[0] &= 0x4f;
352 if (slhc_remember(sl->slcomp, sl->rbuff, count) <= 0)
353 return;
354 }
355 }
356#endif /* SL_INCLUDE_CSLIP */
357
358 dev->stats.rx_bytes += count;
359
360 skb = dev_alloc_skb(count);
361 if (skb == NULL) {
362 printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n", dev->name);
363 dev->stats.rx_dropped++;
364 return;
365 }
366 skb->dev = dev;
367 skb_put_data(skb, sl->rbuff, count);
368 skb_reset_mac_header(skb);
369 skb->protocol = htons(ETH_P_IP);
370 netif_rx_ni(skb);
371 dev->stats.rx_packets++;
372}
373
374/* Encapsulate one IP datagram and stuff into a TTY queue. */
375static void sl_encaps(struct slip *sl, unsigned char *icp, int len)
376{
377 unsigned char *p;
378 int actual, count;
379
380 if (len > sl->mtu) { /* Sigh, shouldn't occur BUT ... */
381 printk(KERN_WARNING "%s: truncating oversized transmit packet!\n", sl->dev->name);
382 sl->dev->stats.tx_dropped++;
383 sl_unlock(sl);
384 return;
385 }
386
387 p = icp;
388#ifdef SL_INCLUDE_CSLIP
389 if (sl->mode & SL_MODE_CSLIP)
390 len = slhc_compress(sl->slcomp, p, len, sl->cbuff, &p, 1);
391#endif
392#ifdef CONFIG_SLIP_MODE_SLIP6
393 if (sl->mode & SL_MODE_SLIP6)
394 count = slip_esc6(p, sl->xbuff, len);
395 else
396#endif
397 count = slip_esc(p, sl->xbuff, len);
398
399 /* Order of next two lines is *very* important.
400 * When we are sending a little amount of data,
401 * the transfer may be completed inside the ops->write()
402 * routine, because it's running with interrupts enabled.
403 * In this case we *never* got WRITE_WAKEUP event,
404 * if we did not request it before write operation.
405 * 14 Oct 1994 Dmitry Gorodchanin.
406 */
407 set_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
408 actual = sl->tty->ops->write(sl->tty, sl->xbuff, count);
409#ifdef SL_CHECK_TRANSMIT
410 netif_trans_update(sl->dev);
411#endif
412 sl->xleft = count - actual;
413 sl->xhead = sl->xbuff + actual;
414#ifdef CONFIG_SLIP_SMART
415 /* VSV */
416 clear_bit(SLF_OUTWAIT, &sl->flags); /* reset outfill flag */
417#endif
418}
419
420/* Write out any remaining transmit buffer. Scheduled when tty is writable */
421static void slip_transmit(struct work_struct *work)
422{
423 struct slip *sl = container_of(work, struct slip, tx_work);
424 int actual;
425
426 spin_lock_bh(&sl->lock);
427 /* First make sure we're connected. */
428 if (!sl->tty || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) {
429 spin_unlock_bh(&sl->lock);
430 return;
431 }
432
433 if (sl->xleft <= 0) {
434 /* Now serial buffer is almost free & we can start
435 * transmission of another packet */
436 sl->dev->stats.tx_packets++;
437 clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
438 spin_unlock_bh(&sl->lock);
439 sl_unlock(sl);
440 return;
441 }
442
443 actual = sl->tty->ops->write(sl->tty, sl->xhead, sl->xleft);
444 sl->xleft -= actual;
445 sl->xhead += actual;
446 spin_unlock_bh(&sl->lock);
447}
448
449/*
450 * Called by the driver when there's room for more data.
451 * Schedule the transmit.
452 */
453static void slip_write_wakeup(struct tty_struct *tty)
454{
455 struct slip *sl = tty->disc_data;
456
457 schedule_work(&sl->tx_work);
458}
459
460static void sl_tx_timeout(struct net_device *dev)
461{
462 struct slip *sl = netdev_priv(dev);
463
464 spin_lock(&sl->lock);
465
466 if (netif_queue_stopped(dev)) {
467 if (!netif_running(dev))
468 goto out;
469
470 /* May be we must check transmitter timeout here ?
471 * 14 Oct 1994 Dmitry Gorodchanin.
472 */
473#ifdef SL_CHECK_TRANSMIT
474 if (time_before(jiffies, dev_trans_start(dev) + 20 * HZ)) {
475 /* 20 sec timeout not reached */
476 goto out;
477 }
478 printk(KERN_WARNING "%s: transmit timed out, %s?\n",
479 dev->name,
480 (tty_chars_in_buffer(sl->tty) || sl->xleft) ?
481 "bad line quality" : "driver error");
482 sl->xleft = 0;
483 clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
484 sl_unlock(sl);
485#endif
486 }
487out:
488 spin_unlock(&sl->lock);
489}
490
491
492/* Encapsulate an IP datagram and kick it into a TTY queue. */
493static netdev_tx_t
494sl_xmit(struct sk_buff *skb, struct net_device *dev)
495{
496 struct slip *sl = netdev_priv(dev);
497
498 spin_lock(&sl->lock);
499 if (!netif_running(dev)) {
500 spin_unlock(&sl->lock);
501 printk(KERN_WARNING "%s: xmit call when iface is down\n", dev->name);
502 dev_kfree_skb(skb);
503 return NETDEV_TX_OK;
504 }
505 if (sl->tty == NULL) {
506 spin_unlock(&sl->lock);
507 dev_kfree_skb(skb);
508 return NETDEV_TX_OK;
509 }
510
511 sl_lock(sl);
512 dev->stats.tx_bytes += skb->len;
513 sl_encaps(sl, skb->data, skb->len);
514 spin_unlock(&sl->lock);
515
516 dev_kfree_skb(skb);
517 return NETDEV_TX_OK;
518}
519
520
521/******************************************
522 * Routines looking at netdevice side.
523 ******************************************/
524
525/* Netdevice UP -> DOWN routine */
526
527static int
528sl_close(struct net_device *dev)
529{
530 struct slip *sl = netdev_priv(dev);
531
532 spin_lock_bh(&sl->lock);
533 if (sl->tty)
534 /* TTY discipline is running. */
535 clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
536 netif_stop_queue(dev);
537 sl->rcount = 0;
538 sl->xleft = 0;
539 spin_unlock_bh(&sl->lock);
540
541 return 0;
542}
543
544/* Netdevice DOWN -> UP routine */
545
546static int sl_open(struct net_device *dev)
547{
548 struct slip *sl = netdev_priv(dev);
549
550 if (sl->tty == NULL)
551 return -ENODEV;
552
553 sl->flags &= (1 << SLF_INUSE);
554 netif_start_queue(dev);
555 return 0;
556}
557
558/* Netdevice change MTU request */
559
560static int sl_change_mtu(struct net_device *dev, int new_mtu)
561{
562 struct slip *sl = netdev_priv(dev);
563
564 return sl_realloc_bufs(sl, new_mtu);
565}
566
567/* Netdevice get statistics request */
568
569static void
570sl_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
571{
572 struct net_device_stats *devstats = &dev->stats;
573#ifdef SL_INCLUDE_CSLIP
574 struct slip *sl = netdev_priv(dev);
575 struct slcompress *comp = sl->slcomp;
576#endif
577 stats->rx_packets = devstats->rx_packets;
578 stats->tx_packets = devstats->tx_packets;
579 stats->rx_bytes = devstats->rx_bytes;
580 stats->tx_bytes = devstats->tx_bytes;
581 stats->rx_dropped = devstats->rx_dropped;
582 stats->tx_dropped = devstats->tx_dropped;
583 stats->tx_errors = devstats->tx_errors;
584 stats->rx_errors = devstats->rx_errors;
585 stats->rx_over_errors = devstats->rx_over_errors;
586
587#ifdef SL_INCLUDE_CSLIP
588 if (comp) {
589 /* Generic compressed statistics */
590 stats->rx_compressed = comp->sls_i_compressed;
591 stats->tx_compressed = comp->sls_o_compressed;
592
593 /* Are we really still needs this? */
594 stats->rx_fifo_errors += comp->sls_i_compressed;
595 stats->rx_dropped += comp->sls_i_tossed;
596 stats->tx_fifo_errors += comp->sls_o_compressed;
597 stats->collisions += comp->sls_o_misses;
598 }
599#endif
600}
601
602/* Netdevice register callback */
603
604static int sl_init(struct net_device *dev)
605{
606 struct slip *sl = netdev_priv(dev);
607
608 /*
609 * Finish setting up the DEVICE info.
610 */
611
612 dev->mtu = sl->mtu;
613 dev->type = ARPHRD_SLIP + sl->mode;
614#ifdef SL_CHECK_TRANSMIT
615 dev->watchdog_timeo = 20*HZ;
616#endif
617 return 0;
618}
619
620
621static void sl_uninit(struct net_device *dev)
622{
623 struct slip *sl = netdev_priv(dev);
624
625 sl_free_bufs(sl);
626}
627
628/* Hook the destructor so we can free slip devices at the right point in time */
629static void sl_free_netdev(struct net_device *dev)
630{
631 int i = dev->base_addr;
632
633 slip_devs[i] = NULL;
634}
635
636static const struct net_device_ops sl_netdev_ops = {
637 .ndo_init = sl_init,
638 .ndo_uninit = sl_uninit,
639 .ndo_open = sl_open,
640 .ndo_stop = sl_close,
641 .ndo_start_xmit = sl_xmit,
642 .ndo_get_stats64 = sl_get_stats64,
643 .ndo_change_mtu = sl_change_mtu,
644 .ndo_tx_timeout = sl_tx_timeout,
645#ifdef CONFIG_SLIP_SMART
646 .ndo_do_ioctl = sl_ioctl,
647#endif
648};
649
650
651static void sl_setup(struct net_device *dev)
652{
653 dev->netdev_ops = &sl_netdev_ops;
654 dev->needs_free_netdev = true;
655 dev->priv_destructor = sl_free_netdev;
656
657 dev->hard_header_len = 0;
658 dev->addr_len = 0;
659 dev->tx_queue_len = 10;
660
661 /* MTU range: 68 - 65534 */
662 dev->min_mtu = 68;
663 dev->max_mtu = 65534;
664
665 /* New-style flags. */
666 dev->flags = IFF_NOARP|IFF_POINTOPOINT|IFF_MULTICAST;
667}
668
669/******************************************
670 Routines looking at TTY side.
671 ******************************************/
672
673
674/*
675 * Handle the 'receiver data ready' interrupt.
676 * This function is called by the 'tty_io' module in the kernel when
677 * a block of SLIP data has been received, which can now be decapsulated
678 * and sent on to some IP layer for further processing. This will not
679 * be re-entered while running but other ldisc functions may be called
680 * in parallel
681 */
682
683static void slip_receive_buf(struct tty_struct *tty, const unsigned char *cp,
684 char *fp, int count)
685{
686 struct slip *sl = tty->disc_data;
687
688 if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev))
689 return;
690
691 /* Read the characters out of the buffer */
692 while (count--) {
693 if (fp && *fp++) {
694 if (!test_and_set_bit(SLF_ERROR, &sl->flags))
695 sl->dev->stats.rx_errors++;
696 cp++;
697 continue;
698 }
699#ifdef CONFIG_SLIP_MODE_SLIP6
700 if (sl->mode & SL_MODE_SLIP6)
701 slip_unesc6(sl, *cp++);
702 else
703#endif
704 slip_unesc(sl, *cp++);
705 }
706}
707
708/************************************
709 * slip_open helper routines.
710 ************************************/
711
712/* Collect hanged up channels */
713static void sl_sync(void)
714{
715 int i;
716 struct net_device *dev;
717 struct slip *sl;
718
719 for (i = 0; i < slip_maxdev; i++) {
720 dev = slip_devs[i];
721 if (dev == NULL)
722 break;
723
724 sl = netdev_priv(dev);
725 if (sl->tty || sl->leased)
726 continue;
727 if (dev->flags & IFF_UP)
728 dev_close(dev);
729 }
730}
731
732
733/* Find a free SLIP channel, and link in this `tty' line. */
734static struct slip *sl_alloc(void)
735{
736 int i;
737 char name[IFNAMSIZ];
738 struct net_device *dev = NULL;
739 struct slip *sl;
740
741 for (i = 0; i < slip_maxdev; i++) {
742 dev = slip_devs[i];
743 if (dev == NULL)
744 break;
745 }
746 /* Sorry, too many, all slots in use */
747 if (i >= slip_maxdev)
748 return NULL;
749
750 sprintf(name, "sl%d", i);
751 dev = alloc_netdev(sizeof(*sl), name, NET_NAME_UNKNOWN, sl_setup);
752 if (!dev)
753 return NULL;
754
755 dev->base_addr = i;
756 sl = netdev_priv(dev);
757
758 /* Initialize channel control data */
759 sl->magic = SLIP_MAGIC;
760 sl->dev = dev;
761 spin_lock_init(&sl->lock);
762 INIT_WORK(&sl->tx_work, slip_transmit);
763 sl->mode = SL_MODE_DEFAULT;
764#ifdef CONFIG_SLIP_SMART
765 /* initialize timer_list struct */
766 timer_setup(&sl->keepalive_timer, sl_keepalive, 0);
767 timer_setup(&sl->outfill_timer, sl_outfill, 0);
768#endif
769 slip_devs[i] = dev;
770 return sl;
771}
772
773/*
774 * Open the high-level part of the SLIP channel.
775 * This function is called by the TTY module when the
776 * SLIP line discipline is called for. Because we are
777 * sure the tty line exists, we only have to link it to
778 * a free SLIP channel...
779 *
780 * Called in process context serialized from other ldisc calls.
781 */
782
783static int slip_open(struct tty_struct *tty)
784{
785 struct slip *sl;
786 int err;
787
788 if (!capable(CAP_NET_ADMIN))
789 return -EPERM;
790
791 if (tty->ops->write == NULL)
792 return -EOPNOTSUPP;
793
794 /* RTnetlink lock is misused here to serialize concurrent
795 opens of slip channels. There are better ways, but it is
796 the simplest one.
797 */
798 rtnl_lock();
799
800 /* Collect hanged up channels. */
801 sl_sync();
802
803 sl = tty->disc_data;
804
805 err = -EEXIST;
806 /* First make sure we're not already connected. */
807 if (sl && sl->magic == SLIP_MAGIC)
808 goto err_exit;
809
810 /* OK. Find a free SLIP channel to use. */
811 err = -ENFILE;
812 sl = sl_alloc();
813 if (sl == NULL)
814 goto err_exit;
815
816 sl->tty = tty;
817 tty->disc_data = sl;
818 sl->pid = current->pid;
819
820 if (!test_bit(SLF_INUSE, &sl->flags)) {
821 /* Perform the low-level SLIP initialization. */
822 err = sl_alloc_bufs(sl, SL_MTU);
823 if (err)
824 goto err_free_chan;
825
826 set_bit(SLF_INUSE, &sl->flags);
827
828 err = register_netdevice(sl->dev);
829 if (err)
830 goto err_free_bufs;
831 }
832
833#ifdef CONFIG_SLIP_SMART
834 if (sl->keepalive) {
835 sl->keepalive_timer.expires = jiffies + sl->keepalive * HZ;
836 add_timer(&sl->keepalive_timer);
837 }
838 if (sl->outfill) {
839 sl->outfill_timer.expires = jiffies + sl->outfill * HZ;
840 add_timer(&sl->outfill_timer);
841 }
842#endif
843
844 /* Done. We have linked the TTY line to a channel. */
845 rtnl_unlock();
846 tty->receive_room = 65536; /* We don't flow control */
847
848 /* TTY layer expects 0 on success */
849 return 0;
850
851err_free_bufs:
852 sl_free_bufs(sl);
853
854err_free_chan:
855 sl->tty = NULL;
856 tty->disc_data = NULL;
857 clear_bit(SLF_INUSE, &sl->flags);
858
859err_exit:
860 rtnl_unlock();
861
862 /* Count references from TTY module */
863 return err;
864}
865
866/*
867 * Close down a SLIP channel.
868 * This means flushing out any pending queues, and then returning. This
869 * call is serialized against other ldisc functions.
870 *
871 * We also use this method fo a hangup event
872 */
873
874static void slip_close(struct tty_struct *tty)
875{
876 struct slip *sl = tty->disc_data;
877
878 /* First make sure we're connected. */
879 if (!sl || sl->magic != SLIP_MAGIC || sl->tty != tty)
880 return;
881
882 spin_lock_bh(&sl->lock);
883 tty->disc_data = NULL;
884 sl->tty = NULL;
885 spin_unlock_bh(&sl->lock);
886
887 flush_work(&sl->tx_work);
888
889 /* VSV = very important to remove timers */
890#ifdef CONFIG_SLIP_SMART
891 del_timer_sync(&sl->keepalive_timer);
892 del_timer_sync(&sl->outfill_timer);
893#endif
894 /* Flush network side */
895 unregister_netdev(sl->dev);
896 /* This will complete via sl_free_netdev */
897}
898
899static int slip_hangup(struct tty_struct *tty)
900{
901 slip_close(tty);
902 return 0;
903}
904 /************************************************************************
905 * STANDARD SLIP ENCAPSULATION *
906 ************************************************************************/
907
908static int slip_esc(unsigned char *s, unsigned char *d, int len)
909{
910 unsigned char *ptr = d;
911 unsigned char c;
912
913 /*
914 * Send an initial END character to flush out any
915 * data that may have accumulated in the receiver
916 * due to line noise.
917 */
918
919 *ptr++ = END;
920
921 /*
922 * For each byte in the packet, send the appropriate
923 * character sequence, according to the SLIP protocol.
924 */
925
926 while (len-- > 0) {
927 switch (c = *s++) {
928 case END:
929 *ptr++ = ESC;
930 *ptr++ = ESC_END;
931 break;
932 case ESC:
933 *ptr++ = ESC;
934 *ptr++ = ESC_ESC;
935 break;
936 default:
937 *ptr++ = c;
938 break;
939 }
940 }
941 *ptr++ = END;
942 return ptr - d;
943}
944
945static void slip_unesc(struct slip *sl, unsigned char s)
946{
947
948 switch (s) {
949 case END:
950#ifdef CONFIG_SLIP_SMART
951 /* drop keeptest bit = VSV */
952 if (test_bit(SLF_KEEPTEST, &sl->flags))
953 clear_bit(SLF_KEEPTEST, &sl->flags);
954#endif
955
956 if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
957 (sl->rcount > 2))
958 sl_bump(sl);
959 clear_bit(SLF_ESCAPE, &sl->flags);
960 sl->rcount = 0;
961 return;
962
963 case ESC:
964 set_bit(SLF_ESCAPE, &sl->flags);
965 return;
966 case ESC_ESC:
967 if (test_and_clear_bit(SLF_ESCAPE, &sl->flags))
968 s = ESC;
969 break;
970 case ESC_END:
971 if (test_and_clear_bit(SLF_ESCAPE, &sl->flags))
972 s = END;
973 break;
974 }
975 if (!test_bit(SLF_ERROR, &sl->flags)) {
976 if (sl->rcount < sl->buffsize) {
977 sl->rbuff[sl->rcount++] = s;
978 return;
979 }
980 sl->dev->stats.rx_over_errors++;
981 set_bit(SLF_ERROR, &sl->flags);
982 }
983}
984
985
986#ifdef CONFIG_SLIP_MODE_SLIP6
987/************************************************************************
988 * 6 BIT SLIP ENCAPSULATION *
989 ************************************************************************/
990
991static int slip_esc6(unsigned char *s, unsigned char *d, int len)
992{
993 unsigned char *ptr = d;
994 unsigned char c;
995 int i;
996 unsigned short v = 0;
997 short bits = 0;
998
999 /*
1000 * Send an initial END character to flush out any
1001 * data that may have accumulated in the receiver
1002 * due to line noise.
1003 */
1004
1005 *ptr++ = 0x70;
1006
1007 /*
1008 * Encode the packet into printable ascii characters
1009 */
1010
1011 for (i = 0; i < len; ++i) {
1012 v = (v << 8) | s[i];
1013 bits += 8;
1014 while (bits >= 6) {
1015 bits -= 6;
1016 c = 0x30 + ((v >> bits) & 0x3F);
1017 *ptr++ = c;
1018 }
1019 }
1020 if (bits) {
1021 c = 0x30 + ((v << (6 - bits)) & 0x3F);
1022 *ptr++ = c;
1023 }
1024 *ptr++ = 0x70;
1025 return ptr - d;
1026}
1027
1028static void slip_unesc6(struct slip *sl, unsigned char s)
1029{
1030 unsigned char c;
1031
1032 if (s == 0x70) {
1033#ifdef CONFIG_SLIP_SMART
1034 /* drop keeptest bit = VSV */
1035 if (test_bit(SLF_KEEPTEST, &sl->flags))
1036 clear_bit(SLF_KEEPTEST, &sl->flags);
1037#endif
1038
1039 if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
1040 (sl->rcount > 2))
1041 sl_bump(sl);
1042 sl->rcount = 0;
1043 sl->xbits = 0;
1044 sl->xdata = 0;
1045 } else if (s >= 0x30 && s < 0x70) {
1046 sl->xdata = (sl->xdata << 6) | ((s - 0x30) & 0x3F);
1047 sl->xbits += 6;
1048 if (sl->xbits >= 8) {
1049 sl->xbits -= 8;
1050 c = (unsigned char)(sl->xdata >> sl->xbits);
1051 if (!test_bit(SLF_ERROR, &sl->flags)) {
1052 if (sl->rcount < sl->buffsize) {
1053 sl->rbuff[sl->rcount++] = c;
1054 return;
1055 }
1056 sl->dev->stats.rx_over_errors++;
1057 set_bit(SLF_ERROR, &sl->flags);
1058 }
1059 }
1060 }
1061}
1062#endif /* CONFIG_SLIP_MODE_SLIP6 */
1063
1064/* Perform I/O control on an active SLIP channel. */
1065static int slip_ioctl(struct tty_struct *tty, struct file *file,
1066 unsigned int cmd, unsigned long arg)
1067{
1068 struct slip *sl = tty->disc_data;
1069 unsigned int tmp;
1070 int __user *p = (int __user *)arg;
1071
1072 /* First make sure we're connected. */
1073 if (!sl || sl->magic != SLIP_MAGIC)
1074 return -EINVAL;
1075
1076 switch (cmd) {
1077 case SIOCGIFNAME:
1078 tmp = strlen(sl->dev->name) + 1;
1079 if (copy_to_user((void __user *)arg, sl->dev->name, tmp))
1080 return -EFAULT;
1081 return 0;
1082
1083 case SIOCGIFENCAP:
1084 if (put_user(sl->mode, p))
1085 return -EFAULT;
1086 return 0;
1087
1088 case SIOCSIFENCAP:
1089 if (get_user(tmp, p))
1090 return -EFAULT;
1091#ifndef SL_INCLUDE_CSLIP
1092 if (tmp & (SL_MODE_CSLIP|SL_MODE_ADAPTIVE))
1093 return -EINVAL;
1094#else
1095 if ((tmp & (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) ==
1096 (SL_MODE_ADAPTIVE | SL_MODE_CSLIP))
1097 /* return -EINVAL; */
1098 tmp &= ~SL_MODE_ADAPTIVE;
1099#endif
1100#ifndef CONFIG_SLIP_MODE_SLIP6
1101 if (tmp & SL_MODE_SLIP6)
1102 return -EINVAL;
1103#endif
1104 sl->mode = tmp;
1105 sl->dev->type = ARPHRD_SLIP + sl->mode;
1106 return 0;
1107
1108 case SIOCSIFHWADDR:
1109 return -EINVAL;
1110
1111#ifdef CONFIG_SLIP_SMART
1112 /* VSV changes start here */
1113 case SIOCSKEEPALIVE:
1114 if (get_user(tmp, p))
1115 return -EFAULT;
1116 if (tmp > 255) /* max for unchar */
1117 return -EINVAL;
1118
1119 spin_lock_bh(&sl->lock);
1120 if (!sl->tty) {
1121 spin_unlock_bh(&sl->lock);
1122 return -ENODEV;
1123 }
1124 sl->keepalive = (u8)tmp;
1125 if (sl->keepalive != 0) {
1126 mod_timer(&sl->keepalive_timer,
1127 jiffies + sl->keepalive * HZ);
1128 set_bit(SLF_KEEPTEST, &sl->flags);
1129 } else
1130 del_timer(&sl->keepalive_timer);
1131 spin_unlock_bh(&sl->lock);
1132 return 0;
1133
1134 case SIOCGKEEPALIVE:
1135 if (put_user(sl->keepalive, p))
1136 return -EFAULT;
1137 return 0;
1138
1139 case SIOCSOUTFILL:
1140 if (get_user(tmp, p))
1141 return -EFAULT;
1142 if (tmp > 255) /* max for unchar */
1143 return -EINVAL;
1144 spin_lock_bh(&sl->lock);
1145 if (!sl->tty) {
1146 spin_unlock_bh(&sl->lock);
1147 return -ENODEV;
1148 }
1149 sl->outfill = (u8)tmp;
1150 if (sl->outfill != 0) {
1151 mod_timer(&sl->outfill_timer,
1152 jiffies + sl->outfill * HZ);
1153 set_bit(SLF_OUTWAIT, &sl->flags);
1154 } else
1155 del_timer(&sl->outfill_timer);
1156 spin_unlock_bh(&sl->lock);
1157 return 0;
1158
1159 case SIOCGOUTFILL:
1160 if (put_user(sl->outfill, p))
1161 return -EFAULT;
1162 return 0;
1163 /* VSV changes end */
1164#endif
1165 default:
1166 return tty_mode_ioctl(tty, file, cmd, arg);
1167 }
1168}
1169
1170#ifdef CONFIG_COMPAT
1171static long slip_compat_ioctl(struct tty_struct *tty, struct file *file,
1172 unsigned int cmd, unsigned long arg)
1173{
1174 switch (cmd) {
1175 case SIOCGIFNAME:
1176 case SIOCGIFENCAP:
1177 case SIOCSIFENCAP:
1178 case SIOCSIFHWADDR:
1179 case SIOCSKEEPALIVE:
1180 case SIOCGKEEPALIVE:
1181 case SIOCSOUTFILL:
1182 case SIOCGOUTFILL:
1183 return slip_ioctl(tty, file, cmd,
1184 (unsigned long)compat_ptr(arg));
1185 }
1186
1187 return -ENOIOCTLCMD;
1188}
1189#endif
1190
1191/* VSV changes start here */
1192#ifdef CONFIG_SLIP_SMART
1193/* function do_ioctl called from net/core/dev.c
1194 to allow get/set outfill/keepalive parameter
1195 by ifconfig */
1196
1197static int sl_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1198{
1199 struct slip *sl = netdev_priv(dev);
1200 unsigned long *p = (unsigned long *)&rq->ifr_ifru;
1201
1202 if (sl == NULL) /* Allocation failed ?? */
1203 return -ENODEV;
1204
1205 spin_lock_bh(&sl->lock);
1206
1207 if (!sl->tty) {
1208 spin_unlock_bh(&sl->lock);
1209 return -ENODEV;
1210 }
1211
1212 switch (cmd) {
1213 case SIOCSKEEPALIVE:
1214 /* max for unchar */
1215 if ((unsigned)*p > 255) {
1216 spin_unlock_bh(&sl->lock);
1217 return -EINVAL;
1218 }
1219 sl->keepalive = (u8)*p;
1220 if (sl->keepalive != 0) {
1221 sl->keepalive_timer.expires =
1222 jiffies + sl->keepalive * HZ;
1223 mod_timer(&sl->keepalive_timer,
1224 jiffies + sl->keepalive * HZ);
1225 set_bit(SLF_KEEPTEST, &sl->flags);
1226 } else
1227 del_timer(&sl->keepalive_timer);
1228 break;
1229
1230 case SIOCGKEEPALIVE:
1231 *p = sl->keepalive;
1232 break;
1233
1234 case SIOCSOUTFILL:
1235 if ((unsigned)*p > 255) { /* max for unchar */
1236 spin_unlock_bh(&sl->lock);
1237 return -EINVAL;
1238 }
1239 sl->outfill = (u8)*p;
1240 if (sl->outfill != 0) {
1241 mod_timer(&sl->outfill_timer,
1242 jiffies + sl->outfill * HZ);
1243 set_bit(SLF_OUTWAIT, &sl->flags);
1244 } else
1245 del_timer(&sl->outfill_timer);
1246 break;
1247
1248 case SIOCGOUTFILL:
1249 *p = sl->outfill;
1250 break;
1251
1252 case SIOCSLEASE:
1253 /* Resolve race condition, when ioctl'ing hanged up
1254 and opened by another process device.
1255 */
1256 if (sl->tty != current->signal->tty &&
1257 sl->pid != current->pid) {
1258 spin_unlock_bh(&sl->lock);
1259 return -EPERM;
1260 }
1261 sl->leased = 0;
1262 if (*p)
1263 sl->leased = 1;
1264 break;
1265
1266 case SIOCGLEASE:
1267 *p = sl->leased;
1268 }
1269 spin_unlock_bh(&sl->lock);
1270 return 0;
1271}
1272#endif
1273/* VSV changes end */
1274
1275static struct tty_ldisc_ops sl_ldisc = {
1276 .owner = THIS_MODULE,
1277 .magic = TTY_LDISC_MAGIC,
1278 .name = "slip",
1279 .open = slip_open,
1280 .close = slip_close,
1281 .hangup = slip_hangup,
1282 .ioctl = slip_ioctl,
1283#ifdef CONFIG_COMPAT
1284 .compat_ioctl = slip_compat_ioctl,
1285#endif
1286 .receive_buf = slip_receive_buf,
1287 .write_wakeup = slip_write_wakeup,
1288};
1289
1290static int __init slip_init(void)
1291{
1292 int status;
1293
1294 if (slip_maxdev < 4)
1295 slip_maxdev = 4; /* Sanity */
1296
1297 printk(KERN_INFO "SLIP: version %s (dynamic channels, max=%d)"
1298#ifdef CONFIG_SLIP_MODE_SLIP6
1299 " (6 bit encapsulation enabled)"
1300#endif
1301 ".\n",
1302 SLIP_VERSION, slip_maxdev);
1303#if defined(SL_INCLUDE_CSLIP)
1304 printk(KERN_INFO "CSLIP: code copyright 1989 Regents of the University of California.\n");
1305#endif
1306#ifdef CONFIG_SLIP_SMART
1307 printk(KERN_INFO "SLIP linefill/keepalive option.\n");
1308#endif
1309
1310 slip_devs = kzalloc(sizeof(struct net_device *)*slip_maxdev,
1311 GFP_KERNEL);
1312 if (!slip_devs)
1313 return -ENOMEM;
1314
1315 /* Fill in our line protocol discipline, and register it */
1316 status = tty_register_ldisc(N_SLIP, &sl_ldisc);
1317 if (status != 0) {
1318 printk(KERN_ERR "SLIP: can't register line discipline (err = %d)\n", status);
1319 kfree(slip_devs);
1320 }
1321 return status;
1322}
1323
1324static void __exit slip_exit(void)
1325{
1326 int i;
1327 struct net_device *dev;
1328 struct slip *sl;
1329 unsigned long timeout = jiffies + HZ;
1330 int busy = 0;
1331
1332 if (slip_devs == NULL)
1333 return;
1334
1335 /* First of all: check for active disciplines and hangup them.
1336 */
1337 do {
1338 if (busy)
1339 msleep_interruptible(100);
1340
1341 busy = 0;
1342 for (i = 0; i < slip_maxdev; i++) {
1343 dev = slip_devs[i];
1344 if (!dev)
1345 continue;
1346 sl = netdev_priv(dev);
1347 spin_lock_bh(&sl->lock);
1348 if (sl->tty) {
1349 busy++;
1350 tty_hangup(sl->tty);
1351 }
1352 spin_unlock_bh(&sl->lock);
1353 }
1354 } while (busy && time_before(jiffies, timeout));
1355
1356 /* FIXME: hangup is async so we should wait when doing this second
1357 phase */
1358
1359 for (i = 0; i < slip_maxdev; i++) {
1360 dev = slip_devs[i];
1361 if (!dev)
1362 continue;
1363 slip_devs[i] = NULL;
1364
1365 sl = netdev_priv(dev);
1366 if (sl->tty) {
1367 printk(KERN_ERR "%s: tty discipline still running\n",
1368 dev->name);
1369 }
1370
1371 unregister_netdev(dev);
1372 }
1373
1374 kfree(slip_devs);
1375 slip_devs = NULL;
1376
1377 i = tty_unregister_ldisc(N_SLIP);
1378 if (i != 0)
1379 printk(KERN_ERR "SLIP: can't unregister line discipline (err = %d)\n", i);
1380}
1381
1382module_init(slip_init);
1383module_exit(slip_exit);
1384
1385#ifdef CONFIG_SLIP_SMART
1386/*
1387 * This is start of the code for multislip style line checking
1388 * added by Stanislav Voronyi. All changes before marked VSV
1389 */
1390
1391static void sl_outfill(struct timer_list *t)
1392{
1393 struct slip *sl = from_timer(sl, t, outfill_timer);
1394
1395 spin_lock(&sl->lock);
1396
1397 if (sl->tty == NULL)
1398 goto out;
1399
1400 if (sl->outfill) {
1401 if (test_bit(SLF_OUTWAIT, &sl->flags)) {
1402 /* no packets were transmitted, do outfill */
1403#ifdef CONFIG_SLIP_MODE_SLIP6
1404 unsigned char s = (sl->mode & SL_MODE_SLIP6)?0x70:END;
1405#else
1406 unsigned char s = END;
1407#endif
1408 /* put END into tty queue. Is it right ??? */
1409 if (!netif_queue_stopped(sl->dev)) {
1410 /* if device busy no outfill */
1411 sl->tty->ops->write(sl->tty, &s, 1);
1412 }
1413 } else
1414 set_bit(SLF_OUTWAIT, &sl->flags);
1415
1416 mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
1417 }
1418out:
1419 spin_unlock(&sl->lock);
1420}
1421
1422static void sl_keepalive(struct timer_list *t)
1423{
1424 struct slip *sl = from_timer(sl, t, keepalive_timer);
1425
1426 spin_lock(&sl->lock);
1427
1428 if (sl->tty == NULL)
1429 goto out;
1430
1431 if (sl->keepalive) {
1432 if (test_bit(SLF_KEEPTEST, &sl->flags)) {
1433 /* keepalive still high :(, we must hangup */
1434 if (sl->outfill)
1435 /* outfill timer must be deleted too */
1436 (void)del_timer(&sl->outfill_timer);
1437 printk(KERN_DEBUG "%s: no packets received during keepalive timeout, hangup.\n", sl->dev->name);
1438 /* this must hangup tty & close slip */
1439 tty_hangup(sl->tty);
1440 /* I think we need not something else */
1441 goto out;
1442 } else
1443 set_bit(SLF_KEEPTEST, &sl->flags);
1444
1445 mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
1446 }
1447out:
1448 spin_unlock(&sl->lock);
1449}
1450
1451#endif
1452MODULE_LICENSE("GPL");
1453MODULE_ALIAS_LDISC(N_SLIP);
1/*
2 * slip.c This module implements the SLIP protocol for kernel-based
3 * devices like TTY. It interfaces between a raw TTY, and the
4 * kernel's INET protocol layers.
5 *
6 * Version: @(#)slip.c 0.8.3 12/24/94
7 *
8 * Authors: Laurence Culhane, <loz@holmes.demon.co.uk>
9 * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
10 *
11 * Fixes:
12 * Alan Cox : Sanity checks and avoid tx overruns.
13 * Has a new sl->mtu field.
14 * Alan Cox : Found cause of overrun. ifconfig sl0
15 * mtu upwards. Driver now spots this
16 * and grows/shrinks its buffers(hack!).
17 * Memory leak if you run out of memory
18 * setting up a slip driver fixed.
19 * Matt Dillon : Printable slip (borrowed from NET2E)
20 * Pauline Middelink : Slip driver fixes.
21 * Alan Cox : Honours the old SL_COMPRESSED flag
22 * Alan Cox : KISS AX.25 and AXUI IP support
23 * Michael Riepe : Automatic CSLIP recognition added
24 * Charles Hedrick : CSLIP header length problem fix.
25 * Alan Cox : Corrected non-IP cases of the above.
26 * Alan Cox : Now uses hardware type as per FvK.
27 * Alan Cox : Default to 192.168.0.0 (RFC 1597)
28 * A.N.Kuznetsov : dev_tint() recursion fix.
29 * Dmitry Gorodchanin : SLIP memory leaks
30 * Dmitry Gorodchanin : Code cleanup. Reduce tty driver
31 * buffering from 4096 to 256 bytes.
32 * Improving SLIP response time.
33 * CONFIG_SLIP_MODE_SLIP6.
34 * ifconfig sl? up & down now works
35 * correctly.
36 * Modularization.
37 * Alan Cox : Oops - fix AX.25 buffer lengths
38 * Dmitry Gorodchanin : Even more cleanups. Preserve CSLIP
39 * statistics. Include CSLIP code only
40 * if it really needed.
41 * Alan Cox : Free slhc buffers in the right place.
42 * Alan Cox : Allow for digipeated IP over AX.25
43 * Matti Aarnio : Dynamic SLIP devices, with ideas taken
44 * from Jim Freeman's <jfree@caldera.com>
45 * dynamic PPP devices. We do NOT kfree()
46 * device entries, just reg./unreg. them
47 * as they are needed. We kfree() them
48 * at module cleanup.
49 * With MODULE-loading ``insmod'', user
50 * can issue parameter: slip_maxdev=1024
51 * (Or how much he/she wants.. Default
52 * is 256)
53 * Stanislav Voronyi : Slip line checking, with ideas taken
54 * from multislip BSDI driver which was
55 * written by Igor Chechik, RELCOM Corp.
56 * Only algorithms have been ported to
57 * Linux SLIP driver.
58 * Vitaly E. Lavrov : Sane behaviour on tty hangup.
59 * Alexey Kuznetsov : Cleanup interfaces to tty & netdevice
60 * modules.
61 */
62
63#define SL_CHECK_TRANSMIT
64#include <linux/module.h>
65#include <linux/moduleparam.h>
66
67#include <asm/uaccess.h>
68#include <linux/bitops.h>
69#include <linux/sched.h>
70#include <linux/string.h>
71#include <linux/mm.h>
72#include <linux/interrupt.h>
73#include <linux/in.h>
74#include <linux/tty.h>
75#include <linux/errno.h>
76#include <linux/netdevice.h>
77#include <linux/etherdevice.h>
78#include <linux/skbuff.h>
79#include <linux/rtnetlink.h>
80#include <linux/if_arp.h>
81#include <linux/if_slip.h>
82#include <linux/compat.h>
83#include <linux/delay.h>
84#include <linux/init.h>
85#include <linux/slab.h>
86#include "slip.h"
87#ifdef CONFIG_INET
88#include <linux/ip.h>
89#include <linux/tcp.h>
90#include <net/slhc_vj.h>
91#endif
92
93#define SLIP_VERSION "0.8.4-NET3.019-NEWTTY"
94
95static struct net_device **slip_devs;
96
97static int slip_maxdev = SL_NRUNIT;
98module_param(slip_maxdev, int, 0);
99MODULE_PARM_DESC(slip_maxdev, "Maximum number of slip devices");
100
101static int slip_esc(unsigned char *p, unsigned char *d, int len);
102static void slip_unesc(struct slip *sl, unsigned char c);
103#ifdef CONFIG_SLIP_MODE_SLIP6
104static int slip_esc6(unsigned char *p, unsigned char *d, int len);
105static void slip_unesc6(struct slip *sl, unsigned char c);
106#endif
107#ifdef CONFIG_SLIP_SMART
108static void sl_keepalive(unsigned long sls);
109static void sl_outfill(unsigned long sls);
110static int sl_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
111#endif
112
113/********************************
114* Buffer administration routines:
115* sl_alloc_bufs()
116* sl_free_bufs()
117* sl_realloc_bufs()
118*
119* NOTE: sl_realloc_bufs != sl_free_bufs + sl_alloc_bufs, because
120* sl_realloc_bufs provides strong atomicity and reallocation
121* on actively running device.
122*********************************/
123
124/*
125 Allocate channel buffers.
126 */
127
128static int sl_alloc_bufs(struct slip *sl, int mtu)
129{
130 int err = -ENOBUFS;
131 unsigned long len;
132 char *rbuff = NULL;
133 char *xbuff = NULL;
134#ifdef SL_INCLUDE_CSLIP
135 char *cbuff = NULL;
136 struct slcompress *slcomp = NULL;
137#endif
138
139 /*
140 * Allocate the SLIP frame buffers:
141 *
142 * rbuff Receive buffer.
143 * xbuff Transmit buffer.
144 * cbuff Temporary compression buffer.
145 */
146 len = mtu * 2;
147
148 /*
149 * allow for arrival of larger UDP packets, even if we say not to
150 * also fixes a bug in which SunOS sends 512-byte packets even with
151 * an MSS of 128
152 */
153 if (len < 576 * 2)
154 len = 576 * 2;
155 rbuff = kmalloc(len + 4, GFP_KERNEL);
156 if (rbuff == NULL)
157 goto err_exit;
158 xbuff = kmalloc(len + 4, GFP_KERNEL);
159 if (xbuff == NULL)
160 goto err_exit;
161#ifdef SL_INCLUDE_CSLIP
162 cbuff = kmalloc(len + 4, GFP_KERNEL);
163 if (cbuff == NULL)
164 goto err_exit;
165 slcomp = slhc_init(16, 16);
166 if (slcomp == NULL)
167 goto err_exit;
168#endif
169 spin_lock_bh(&sl->lock);
170 if (sl->tty == NULL) {
171 spin_unlock_bh(&sl->lock);
172 err = -ENODEV;
173 goto err_exit;
174 }
175 sl->mtu = mtu;
176 sl->buffsize = len;
177 sl->rcount = 0;
178 sl->xleft = 0;
179 rbuff = xchg(&sl->rbuff, rbuff);
180 xbuff = xchg(&sl->xbuff, xbuff);
181#ifdef SL_INCLUDE_CSLIP
182 cbuff = xchg(&sl->cbuff, cbuff);
183 slcomp = xchg(&sl->slcomp, slcomp);
184#endif
185#ifdef CONFIG_SLIP_MODE_SLIP6
186 sl->xdata = 0;
187 sl->xbits = 0;
188#endif
189 spin_unlock_bh(&sl->lock);
190 err = 0;
191
192 /* Cleanup */
193err_exit:
194#ifdef SL_INCLUDE_CSLIP
195 kfree(cbuff);
196 slhc_free(slcomp);
197#endif
198 kfree(xbuff);
199 kfree(rbuff);
200 return err;
201}
202
203/* Free a SLIP channel buffers. */
204static void sl_free_bufs(struct slip *sl)
205{
206 /* Free all SLIP frame buffers. */
207 kfree(xchg(&sl->rbuff, NULL));
208 kfree(xchg(&sl->xbuff, NULL));
209#ifdef SL_INCLUDE_CSLIP
210 kfree(xchg(&sl->cbuff, NULL));
211 slhc_free(xchg(&sl->slcomp, NULL));
212#endif
213}
214
215/*
216 Reallocate slip channel buffers.
217 */
218
219static int sl_realloc_bufs(struct slip *sl, int mtu)
220{
221 int err = 0;
222 struct net_device *dev = sl->dev;
223 unsigned char *xbuff, *rbuff;
224#ifdef SL_INCLUDE_CSLIP
225 unsigned char *cbuff;
226#endif
227 int len = mtu * 2;
228
229/*
230 * allow for arrival of larger UDP packets, even if we say not to
231 * also fixes a bug in which SunOS sends 512-byte packets even with
232 * an MSS of 128
233 */
234 if (len < 576 * 2)
235 len = 576 * 2;
236
237 xbuff = kmalloc(len + 4, GFP_ATOMIC);
238 rbuff = kmalloc(len + 4, GFP_ATOMIC);
239#ifdef SL_INCLUDE_CSLIP
240 cbuff = kmalloc(len + 4, GFP_ATOMIC);
241#endif
242
243
244#ifdef SL_INCLUDE_CSLIP
245 if (xbuff == NULL || rbuff == NULL || cbuff == NULL) {
246#else
247 if (xbuff == NULL || rbuff == NULL) {
248#endif
249 if (mtu > sl->mtu) {
250 printk(KERN_WARNING "%s: unable to grow slip buffers, MTU change cancelled.\n",
251 dev->name);
252 err = -ENOBUFS;
253 }
254 goto done;
255 }
256 spin_lock_bh(&sl->lock);
257
258 err = -ENODEV;
259 if (sl->tty == NULL)
260 goto done_on_bh;
261
262 xbuff = xchg(&sl->xbuff, xbuff);
263 rbuff = xchg(&sl->rbuff, rbuff);
264#ifdef SL_INCLUDE_CSLIP
265 cbuff = xchg(&sl->cbuff, cbuff);
266#endif
267 if (sl->xleft) {
268 if (sl->xleft <= len) {
269 memcpy(sl->xbuff, sl->xhead, sl->xleft);
270 } else {
271 sl->xleft = 0;
272 dev->stats.tx_dropped++;
273 }
274 }
275 sl->xhead = sl->xbuff;
276
277 if (sl->rcount) {
278 if (sl->rcount <= len) {
279 memcpy(sl->rbuff, rbuff, sl->rcount);
280 } else {
281 sl->rcount = 0;
282 dev->stats.rx_over_errors++;
283 set_bit(SLF_ERROR, &sl->flags);
284 }
285 }
286 sl->mtu = mtu;
287 dev->mtu = mtu;
288 sl->buffsize = len;
289 err = 0;
290
291done_on_bh:
292 spin_unlock_bh(&sl->lock);
293
294done:
295 kfree(xbuff);
296 kfree(rbuff);
297#ifdef SL_INCLUDE_CSLIP
298 kfree(cbuff);
299#endif
300 return err;
301}
302
303
304/* Set the "sending" flag. This must be atomic hence the set_bit. */
305static inline void sl_lock(struct slip *sl)
306{
307 netif_stop_queue(sl->dev);
308}
309
310
311/* Clear the "sending" flag. This must be atomic, hence the ASM. */
312static inline void sl_unlock(struct slip *sl)
313{
314 netif_wake_queue(sl->dev);
315}
316
317/* Send one completely decapsulated IP datagram to the IP layer. */
318static void sl_bump(struct slip *sl)
319{
320 struct net_device *dev = sl->dev;
321 struct sk_buff *skb;
322 int count;
323
324 count = sl->rcount;
325#ifdef SL_INCLUDE_CSLIP
326 if (sl->mode & (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) {
327 unsigned char c = sl->rbuff[0];
328 if (c & SL_TYPE_COMPRESSED_TCP) {
329 /* ignore compressed packets when CSLIP is off */
330 if (!(sl->mode & SL_MODE_CSLIP)) {
331 printk(KERN_WARNING "%s: compressed packet ignored\n", dev->name);
332 return;
333 }
334 /* make sure we've reserved enough space for uncompress
335 to use */
336 if (count + 80 > sl->buffsize) {
337 dev->stats.rx_over_errors++;
338 return;
339 }
340 count = slhc_uncompress(sl->slcomp, sl->rbuff, count);
341 if (count <= 0)
342 return;
343 } else if (c >= SL_TYPE_UNCOMPRESSED_TCP) {
344 if (!(sl->mode & SL_MODE_CSLIP)) {
345 /* turn on header compression */
346 sl->mode |= SL_MODE_CSLIP;
347 sl->mode &= ~SL_MODE_ADAPTIVE;
348 printk(KERN_INFO "%s: header compression turned on\n", dev->name);
349 }
350 sl->rbuff[0] &= 0x4f;
351 if (slhc_remember(sl->slcomp, sl->rbuff, count) <= 0)
352 return;
353 }
354 }
355#endif /* SL_INCLUDE_CSLIP */
356
357 dev->stats.rx_bytes += count;
358
359 skb = dev_alloc_skb(count);
360 if (skb == NULL) {
361 printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n", dev->name);
362 dev->stats.rx_dropped++;
363 return;
364 }
365 skb->dev = dev;
366 memcpy(skb_put(skb, count), sl->rbuff, count);
367 skb_reset_mac_header(skb);
368 skb->protocol = htons(ETH_P_IP);
369 netif_rx_ni(skb);
370 dev->stats.rx_packets++;
371}
372
373/* Encapsulate one IP datagram and stuff into a TTY queue. */
374static void sl_encaps(struct slip *sl, unsigned char *icp, int len)
375{
376 unsigned char *p;
377 int actual, count;
378
379 if (len > sl->mtu) { /* Sigh, shouldn't occur BUT ... */
380 printk(KERN_WARNING "%s: truncating oversized transmit packet!\n", sl->dev->name);
381 sl->dev->stats.tx_dropped++;
382 sl_unlock(sl);
383 return;
384 }
385
386 p = icp;
387#ifdef SL_INCLUDE_CSLIP
388 if (sl->mode & SL_MODE_CSLIP)
389 len = slhc_compress(sl->slcomp, p, len, sl->cbuff, &p, 1);
390#endif
391#ifdef CONFIG_SLIP_MODE_SLIP6
392 if (sl->mode & SL_MODE_SLIP6)
393 count = slip_esc6(p, (unsigned char *) sl->xbuff, len);
394 else
395#endif
396 count = slip_esc(p, (unsigned char *) sl->xbuff, len);
397
398 /* Order of next two lines is *very* important.
399 * When we are sending a little amount of data,
400 * the transfer may be completed inside the ops->write()
401 * routine, because it's running with interrupts enabled.
402 * In this case we *never* got WRITE_WAKEUP event,
403 * if we did not request it before write operation.
404 * 14 Oct 1994 Dmitry Gorodchanin.
405 */
406 set_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
407 actual = sl->tty->ops->write(sl->tty, sl->xbuff, count);
408#ifdef SL_CHECK_TRANSMIT
409 sl->dev->trans_start = jiffies;
410#endif
411 sl->xleft = count - actual;
412 sl->xhead = sl->xbuff + actual;
413#ifdef CONFIG_SLIP_SMART
414 /* VSV */
415 clear_bit(SLF_OUTWAIT, &sl->flags); /* reset outfill flag */
416#endif
417}
418
419/*
420 * Called by the driver when there's room for more data. If we have
421 * more packets to send, we send them here.
422 */
423static void slip_write_wakeup(struct tty_struct *tty)
424{
425 int actual;
426 struct slip *sl = tty->disc_data;
427
428 /* First make sure we're connected. */
429 if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev))
430 return;
431
432 if (sl->xleft <= 0) {
433 /* Now serial buffer is almost free & we can start
434 * transmission of another packet */
435 sl->dev->stats.tx_packets++;
436 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
437 sl_unlock(sl);
438 return;
439 }
440
441 actual = tty->ops->write(tty, sl->xhead, sl->xleft);
442 sl->xleft -= actual;
443 sl->xhead += actual;
444}
445
446static void sl_tx_timeout(struct net_device *dev)
447{
448 struct slip *sl = netdev_priv(dev);
449
450 spin_lock(&sl->lock);
451
452 if (netif_queue_stopped(dev)) {
453 if (!netif_running(dev))
454 goto out;
455
456 /* May be we must check transmitter timeout here ?
457 * 14 Oct 1994 Dmitry Gorodchanin.
458 */
459#ifdef SL_CHECK_TRANSMIT
460 if (time_before(jiffies, dev_trans_start(dev) + 20 * HZ)) {
461 /* 20 sec timeout not reached */
462 goto out;
463 }
464 printk(KERN_WARNING "%s: transmit timed out, %s?\n",
465 dev->name,
466 (tty_chars_in_buffer(sl->tty) || sl->xleft) ?
467 "bad line quality" : "driver error");
468 sl->xleft = 0;
469 clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
470 sl_unlock(sl);
471#endif
472 }
473out:
474 spin_unlock(&sl->lock);
475}
476
477
478/* Encapsulate an IP datagram and kick it into a TTY queue. */
479static netdev_tx_t
480sl_xmit(struct sk_buff *skb, struct net_device *dev)
481{
482 struct slip *sl = netdev_priv(dev);
483
484 spin_lock(&sl->lock);
485 if (!netif_running(dev)) {
486 spin_unlock(&sl->lock);
487 printk(KERN_WARNING "%s: xmit call when iface is down\n", dev->name);
488 dev_kfree_skb(skb);
489 return NETDEV_TX_OK;
490 }
491 if (sl->tty == NULL) {
492 spin_unlock(&sl->lock);
493 dev_kfree_skb(skb);
494 return NETDEV_TX_OK;
495 }
496
497 sl_lock(sl);
498 dev->stats.tx_bytes += skb->len;
499 sl_encaps(sl, skb->data, skb->len);
500 spin_unlock(&sl->lock);
501
502 dev_kfree_skb(skb);
503 return NETDEV_TX_OK;
504}
505
506
507/******************************************
508 * Routines looking at netdevice side.
509 ******************************************/
510
511/* Netdevice UP -> DOWN routine */
512
513static int
514sl_close(struct net_device *dev)
515{
516 struct slip *sl = netdev_priv(dev);
517
518 spin_lock_bh(&sl->lock);
519 if (sl->tty)
520 /* TTY discipline is running. */
521 clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
522 netif_stop_queue(dev);
523 sl->rcount = 0;
524 sl->xleft = 0;
525 spin_unlock_bh(&sl->lock);
526
527 return 0;
528}
529
530/* Netdevice DOWN -> UP routine */
531
532static int sl_open(struct net_device *dev)
533{
534 struct slip *sl = netdev_priv(dev);
535
536 if (sl->tty == NULL)
537 return -ENODEV;
538
539 sl->flags &= (1 << SLF_INUSE);
540 netif_start_queue(dev);
541 return 0;
542}
543
544/* Netdevice change MTU request */
545
546static int sl_change_mtu(struct net_device *dev, int new_mtu)
547{
548 struct slip *sl = netdev_priv(dev);
549
550 if (new_mtu < 68 || new_mtu > 65534)
551 return -EINVAL;
552
553 if (new_mtu != dev->mtu)
554 return sl_realloc_bufs(sl, new_mtu);
555 return 0;
556}
557
558/* Netdevice get statistics request */
559
560static struct rtnl_link_stats64 *
561sl_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
562{
563 struct net_device_stats *devstats = &dev->stats;
564#ifdef SL_INCLUDE_CSLIP
565 struct slip *sl = netdev_priv(dev);
566 struct slcompress *comp = sl->slcomp;
567#endif
568 stats->rx_packets = devstats->rx_packets;
569 stats->tx_packets = devstats->tx_packets;
570 stats->rx_bytes = devstats->rx_bytes;
571 stats->tx_bytes = devstats->tx_bytes;
572 stats->rx_dropped = devstats->rx_dropped;
573 stats->tx_dropped = devstats->tx_dropped;
574 stats->tx_errors = devstats->tx_errors;
575 stats->rx_errors = devstats->rx_errors;
576 stats->rx_over_errors = devstats->rx_over_errors;
577
578#ifdef SL_INCLUDE_CSLIP
579 if (comp) {
580 /* Generic compressed statistics */
581 stats->rx_compressed = comp->sls_i_compressed;
582 stats->tx_compressed = comp->sls_o_compressed;
583
584 /* Are we really still needs this? */
585 stats->rx_fifo_errors += comp->sls_i_compressed;
586 stats->rx_dropped += comp->sls_i_tossed;
587 stats->tx_fifo_errors += comp->sls_o_compressed;
588 stats->collisions += comp->sls_o_misses;
589 }
590#endif
591 return stats;
592}
593
594/* Netdevice register callback */
595
596static int sl_init(struct net_device *dev)
597{
598 struct slip *sl = netdev_priv(dev);
599
600 /*
601 * Finish setting up the DEVICE info.
602 */
603
604 dev->mtu = sl->mtu;
605 dev->type = ARPHRD_SLIP + sl->mode;
606#ifdef SL_CHECK_TRANSMIT
607 dev->watchdog_timeo = 20*HZ;
608#endif
609 return 0;
610}
611
612
613static void sl_uninit(struct net_device *dev)
614{
615 struct slip *sl = netdev_priv(dev);
616
617 sl_free_bufs(sl);
618}
619
620/* Hook the destructor so we can free slip devices at the right point in time */
621static void sl_free_netdev(struct net_device *dev)
622{
623 int i = dev->base_addr;
624 free_netdev(dev);
625 slip_devs[i] = NULL;
626}
627
628static const struct net_device_ops sl_netdev_ops = {
629 .ndo_init = sl_init,
630 .ndo_uninit = sl_uninit,
631 .ndo_open = sl_open,
632 .ndo_stop = sl_close,
633 .ndo_start_xmit = sl_xmit,
634 .ndo_get_stats64 = sl_get_stats64,
635 .ndo_change_mtu = sl_change_mtu,
636 .ndo_tx_timeout = sl_tx_timeout,
637#ifdef CONFIG_SLIP_SMART
638 .ndo_do_ioctl = sl_ioctl,
639#endif
640};
641
642
643static void sl_setup(struct net_device *dev)
644{
645 dev->netdev_ops = &sl_netdev_ops;
646 dev->destructor = sl_free_netdev;
647
648 dev->hard_header_len = 0;
649 dev->addr_len = 0;
650 dev->tx_queue_len = 10;
651
652 /* New-style flags. */
653 dev->flags = IFF_NOARP|IFF_POINTOPOINT|IFF_MULTICAST;
654}
655
656/******************************************
657 Routines looking at TTY side.
658 ******************************************/
659
660
661/*
662 * Handle the 'receiver data ready' interrupt.
663 * This function is called by the 'tty_io' module in the kernel when
664 * a block of SLIP data has been received, which can now be decapsulated
665 * and sent on to some IP layer for further processing. This will not
666 * be re-entered while running but other ldisc functions may be called
667 * in parallel
668 */
669
670static void slip_receive_buf(struct tty_struct *tty, const unsigned char *cp,
671 char *fp, int count)
672{
673 struct slip *sl = tty->disc_data;
674
675 if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev))
676 return;
677
678 /* Read the characters out of the buffer */
679 while (count--) {
680 if (fp && *fp++) {
681 if (!test_and_set_bit(SLF_ERROR, &sl->flags))
682 sl->dev->stats.rx_errors++;
683 cp++;
684 continue;
685 }
686#ifdef CONFIG_SLIP_MODE_SLIP6
687 if (sl->mode & SL_MODE_SLIP6)
688 slip_unesc6(sl, *cp++);
689 else
690#endif
691 slip_unesc(sl, *cp++);
692 }
693}
694
695/************************************
696 * slip_open helper routines.
697 ************************************/
698
699/* Collect hanged up channels */
700static void sl_sync(void)
701{
702 int i;
703 struct net_device *dev;
704 struct slip *sl;
705
706 for (i = 0; i < slip_maxdev; i++) {
707 dev = slip_devs[i];
708 if (dev == NULL)
709 break;
710
711 sl = netdev_priv(dev);
712 if (sl->tty || sl->leased)
713 continue;
714 if (dev->flags & IFF_UP)
715 dev_close(dev);
716 }
717}
718
719
720/* Find a free SLIP channel, and link in this `tty' line. */
721static struct slip *sl_alloc(dev_t line)
722{
723 int i;
724 char name[IFNAMSIZ];
725 struct net_device *dev = NULL;
726 struct slip *sl;
727
728 for (i = 0; i < slip_maxdev; i++) {
729 dev = slip_devs[i];
730 if (dev == NULL)
731 break;
732 }
733 /* Sorry, too many, all slots in use */
734 if (i >= slip_maxdev)
735 return NULL;
736
737 sprintf(name, "sl%d", i);
738 dev = alloc_netdev(sizeof(*sl), name, sl_setup);
739 if (!dev)
740 return NULL;
741
742 dev->base_addr = i;
743 sl = netdev_priv(dev);
744
745 /* Initialize channel control data */
746 sl->magic = SLIP_MAGIC;
747 sl->dev = dev;
748 spin_lock_init(&sl->lock);
749 sl->mode = SL_MODE_DEFAULT;
750#ifdef CONFIG_SLIP_SMART
751 /* initialize timer_list struct */
752 init_timer(&sl->keepalive_timer);
753 sl->keepalive_timer.data = (unsigned long)sl;
754 sl->keepalive_timer.function = sl_keepalive;
755 init_timer(&sl->outfill_timer);
756 sl->outfill_timer.data = (unsigned long)sl;
757 sl->outfill_timer.function = sl_outfill;
758#endif
759 slip_devs[i] = dev;
760 return sl;
761}
762
763/*
764 * Open the high-level part of the SLIP channel.
765 * This function is called by the TTY module when the
766 * SLIP line discipline is called for. Because we are
767 * sure the tty line exists, we only have to link it to
768 * a free SLIP channel...
769 *
770 * Called in process context serialized from other ldisc calls.
771 */
772
773static int slip_open(struct tty_struct *tty)
774{
775 struct slip *sl;
776 int err;
777
778 if (!capable(CAP_NET_ADMIN))
779 return -EPERM;
780
781 if (tty->ops->write == NULL)
782 return -EOPNOTSUPP;
783
784 /* RTnetlink lock is misused here to serialize concurrent
785 opens of slip channels. There are better ways, but it is
786 the simplest one.
787 */
788 rtnl_lock();
789
790 /* Collect hanged up channels. */
791 sl_sync();
792
793 sl = tty->disc_data;
794
795 err = -EEXIST;
796 /* First make sure we're not already connected. */
797 if (sl && sl->magic == SLIP_MAGIC)
798 goto err_exit;
799
800 /* OK. Find a free SLIP channel to use. */
801 err = -ENFILE;
802 sl = sl_alloc(tty_devnum(tty));
803 if (sl == NULL)
804 goto err_exit;
805
806 sl->tty = tty;
807 tty->disc_data = sl;
808 sl->pid = current->pid;
809
810 if (!test_bit(SLF_INUSE, &sl->flags)) {
811 /* Perform the low-level SLIP initialization. */
812 err = sl_alloc_bufs(sl, SL_MTU);
813 if (err)
814 goto err_free_chan;
815
816 set_bit(SLF_INUSE, &sl->flags);
817
818 err = register_netdevice(sl->dev);
819 if (err)
820 goto err_free_bufs;
821 }
822
823#ifdef CONFIG_SLIP_SMART
824 if (sl->keepalive) {
825 sl->keepalive_timer.expires = jiffies + sl->keepalive * HZ;
826 add_timer(&sl->keepalive_timer);
827 }
828 if (sl->outfill) {
829 sl->outfill_timer.expires = jiffies + sl->outfill * HZ;
830 add_timer(&sl->outfill_timer);
831 }
832#endif
833
834 /* Done. We have linked the TTY line to a channel. */
835 rtnl_unlock();
836 tty->receive_room = 65536; /* We don't flow control */
837
838 /* TTY layer expects 0 on success */
839 return 0;
840
841err_free_bufs:
842 sl_free_bufs(sl);
843
844err_free_chan:
845 sl->tty = NULL;
846 tty->disc_data = NULL;
847 clear_bit(SLF_INUSE, &sl->flags);
848
849err_exit:
850 rtnl_unlock();
851
852 /* Count references from TTY module */
853 return err;
854}
855
856/*
857 * Close down a SLIP channel.
858 * This means flushing out any pending queues, and then returning. This
859 * call is serialized against other ldisc functions.
860 *
861 * We also use this method fo a hangup event
862 */
863
864static void slip_close(struct tty_struct *tty)
865{
866 struct slip *sl = tty->disc_data;
867
868 /* First make sure we're connected. */
869 if (!sl || sl->magic != SLIP_MAGIC || sl->tty != tty)
870 return;
871
872 tty->disc_data = NULL;
873 sl->tty = NULL;
874
875 /* VSV = very important to remove timers */
876#ifdef CONFIG_SLIP_SMART
877 del_timer_sync(&sl->keepalive_timer);
878 del_timer_sync(&sl->outfill_timer);
879#endif
880 /* Flush network side */
881 unregister_netdev(sl->dev);
882 /* This will complete via sl_free_netdev */
883}
884
885static int slip_hangup(struct tty_struct *tty)
886{
887 slip_close(tty);
888 return 0;
889}
890 /************************************************************************
891 * STANDARD SLIP ENCAPSULATION *
892 ************************************************************************/
893
894static int slip_esc(unsigned char *s, unsigned char *d, int len)
895{
896 unsigned char *ptr = d;
897 unsigned char c;
898
899 /*
900 * Send an initial END character to flush out any
901 * data that may have accumulated in the receiver
902 * due to line noise.
903 */
904
905 *ptr++ = END;
906
907 /*
908 * For each byte in the packet, send the appropriate
909 * character sequence, according to the SLIP protocol.
910 */
911
912 while (len-- > 0) {
913 switch (c = *s++) {
914 case END:
915 *ptr++ = ESC;
916 *ptr++ = ESC_END;
917 break;
918 case ESC:
919 *ptr++ = ESC;
920 *ptr++ = ESC_ESC;
921 break;
922 default:
923 *ptr++ = c;
924 break;
925 }
926 }
927 *ptr++ = END;
928 return ptr - d;
929}
930
931static void slip_unesc(struct slip *sl, unsigned char s)
932{
933
934 switch (s) {
935 case END:
936#ifdef CONFIG_SLIP_SMART
937 /* drop keeptest bit = VSV */
938 if (test_bit(SLF_KEEPTEST, &sl->flags))
939 clear_bit(SLF_KEEPTEST, &sl->flags);
940#endif
941
942 if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
943 (sl->rcount > 2))
944 sl_bump(sl);
945 clear_bit(SLF_ESCAPE, &sl->flags);
946 sl->rcount = 0;
947 return;
948
949 case ESC:
950 set_bit(SLF_ESCAPE, &sl->flags);
951 return;
952 case ESC_ESC:
953 if (test_and_clear_bit(SLF_ESCAPE, &sl->flags))
954 s = ESC;
955 break;
956 case ESC_END:
957 if (test_and_clear_bit(SLF_ESCAPE, &sl->flags))
958 s = END;
959 break;
960 }
961 if (!test_bit(SLF_ERROR, &sl->flags)) {
962 if (sl->rcount < sl->buffsize) {
963 sl->rbuff[sl->rcount++] = s;
964 return;
965 }
966 sl->dev->stats.rx_over_errors++;
967 set_bit(SLF_ERROR, &sl->flags);
968 }
969}
970
971
972#ifdef CONFIG_SLIP_MODE_SLIP6
973/************************************************************************
974 * 6 BIT SLIP ENCAPSULATION *
975 ************************************************************************/
976
977static int slip_esc6(unsigned char *s, unsigned char *d, int len)
978{
979 unsigned char *ptr = d;
980 unsigned char c;
981 int i;
982 unsigned short v = 0;
983 short bits = 0;
984
985 /*
986 * Send an initial END character to flush out any
987 * data that may have accumulated in the receiver
988 * due to line noise.
989 */
990
991 *ptr++ = 0x70;
992
993 /*
994 * Encode the packet into printable ascii characters
995 */
996
997 for (i = 0; i < len; ++i) {
998 v = (v << 8) | s[i];
999 bits += 8;
1000 while (bits >= 6) {
1001 bits -= 6;
1002 c = 0x30 + ((v >> bits) & 0x3F);
1003 *ptr++ = c;
1004 }
1005 }
1006 if (bits) {
1007 c = 0x30 + ((v << (6 - bits)) & 0x3F);
1008 *ptr++ = c;
1009 }
1010 *ptr++ = 0x70;
1011 return ptr - d;
1012}
1013
1014static void slip_unesc6(struct slip *sl, unsigned char s)
1015{
1016 unsigned char c;
1017
1018 if (s == 0x70) {
1019#ifdef CONFIG_SLIP_SMART
1020 /* drop keeptest bit = VSV */
1021 if (test_bit(SLF_KEEPTEST, &sl->flags))
1022 clear_bit(SLF_KEEPTEST, &sl->flags);
1023#endif
1024
1025 if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
1026 (sl->rcount > 2))
1027 sl_bump(sl);
1028 sl->rcount = 0;
1029 sl->xbits = 0;
1030 sl->xdata = 0;
1031 } else if (s >= 0x30 && s < 0x70) {
1032 sl->xdata = (sl->xdata << 6) | ((s - 0x30) & 0x3F);
1033 sl->xbits += 6;
1034 if (sl->xbits >= 8) {
1035 sl->xbits -= 8;
1036 c = (unsigned char)(sl->xdata >> sl->xbits);
1037 if (!test_bit(SLF_ERROR, &sl->flags)) {
1038 if (sl->rcount < sl->buffsize) {
1039 sl->rbuff[sl->rcount++] = c;
1040 return;
1041 }
1042 sl->dev->stats.rx_over_errors++;
1043 set_bit(SLF_ERROR, &sl->flags);
1044 }
1045 }
1046 }
1047}
1048#endif /* CONFIG_SLIP_MODE_SLIP6 */
1049
1050/* Perform I/O control on an active SLIP channel. */
1051static int slip_ioctl(struct tty_struct *tty, struct file *file,
1052 unsigned int cmd, unsigned long arg)
1053{
1054 struct slip *sl = tty->disc_data;
1055 unsigned int tmp;
1056 int __user *p = (int __user *)arg;
1057
1058 /* First make sure we're connected. */
1059 if (!sl || sl->magic != SLIP_MAGIC)
1060 return -EINVAL;
1061
1062 switch (cmd) {
1063 case SIOCGIFNAME:
1064 tmp = strlen(sl->dev->name) + 1;
1065 if (copy_to_user((void __user *)arg, sl->dev->name, tmp))
1066 return -EFAULT;
1067 return 0;
1068
1069 case SIOCGIFENCAP:
1070 if (put_user(sl->mode, p))
1071 return -EFAULT;
1072 return 0;
1073
1074 case SIOCSIFENCAP:
1075 if (get_user(tmp, p))
1076 return -EFAULT;
1077#ifndef SL_INCLUDE_CSLIP
1078 if (tmp & (SL_MODE_CSLIP|SL_MODE_ADAPTIVE))
1079 return -EINVAL;
1080#else
1081 if ((tmp & (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) ==
1082 (SL_MODE_ADAPTIVE | SL_MODE_CSLIP))
1083 /* return -EINVAL; */
1084 tmp &= ~SL_MODE_ADAPTIVE;
1085#endif
1086#ifndef CONFIG_SLIP_MODE_SLIP6
1087 if (tmp & SL_MODE_SLIP6)
1088 return -EINVAL;
1089#endif
1090 sl->mode = tmp;
1091 sl->dev->type = ARPHRD_SLIP + sl->mode;
1092 return 0;
1093
1094 case SIOCSIFHWADDR:
1095 return -EINVAL;
1096
1097#ifdef CONFIG_SLIP_SMART
1098 /* VSV changes start here */
1099 case SIOCSKEEPALIVE:
1100 if (get_user(tmp, p))
1101 return -EFAULT;
1102 if (tmp > 255) /* max for unchar */
1103 return -EINVAL;
1104
1105 spin_lock_bh(&sl->lock);
1106 if (!sl->tty) {
1107 spin_unlock_bh(&sl->lock);
1108 return -ENODEV;
1109 }
1110 sl->keepalive = (u8)tmp;
1111 if (sl->keepalive != 0) {
1112 mod_timer(&sl->keepalive_timer,
1113 jiffies + sl->keepalive * HZ);
1114 set_bit(SLF_KEEPTEST, &sl->flags);
1115 } else
1116 del_timer(&sl->keepalive_timer);
1117 spin_unlock_bh(&sl->lock);
1118 return 0;
1119
1120 case SIOCGKEEPALIVE:
1121 if (put_user(sl->keepalive, p))
1122 return -EFAULT;
1123 return 0;
1124
1125 case SIOCSOUTFILL:
1126 if (get_user(tmp, p))
1127 return -EFAULT;
1128 if (tmp > 255) /* max for unchar */
1129 return -EINVAL;
1130 spin_lock_bh(&sl->lock);
1131 if (!sl->tty) {
1132 spin_unlock_bh(&sl->lock);
1133 return -ENODEV;
1134 }
1135 sl->outfill = (u8)tmp;
1136 if (sl->outfill != 0) {
1137 mod_timer(&sl->outfill_timer,
1138 jiffies + sl->outfill * HZ);
1139 set_bit(SLF_OUTWAIT, &sl->flags);
1140 } else
1141 del_timer(&sl->outfill_timer);
1142 spin_unlock_bh(&sl->lock);
1143 return 0;
1144
1145 case SIOCGOUTFILL:
1146 if (put_user(sl->outfill, p))
1147 return -EFAULT;
1148 return 0;
1149 /* VSV changes end */
1150#endif
1151 default:
1152 return tty_mode_ioctl(tty, file, cmd, arg);
1153 }
1154}
1155
1156#ifdef CONFIG_COMPAT
1157static long slip_compat_ioctl(struct tty_struct *tty, struct file *file,
1158 unsigned int cmd, unsigned long arg)
1159{
1160 switch (cmd) {
1161 case SIOCGIFNAME:
1162 case SIOCGIFENCAP:
1163 case SIOCSIFENCAP:
1164 case SIOCSIFHWADDR:
1165 case SIOCSKEEPALIVE:
1166 case SIOCGKEEPALIVE:
1167 case SIOCSOUTFILL:
1168 case SIOCGOUTFILL:
1169 return slip_ioctl(tty, file, cmd,
1170 (unsigned long)compat_ptr(arg));
1171 }
1172
1173 return -ENOIOCTLCMD;
1174}
1175#endif
1176
1177/* VSV changes start here */
1178#ifdef CONFIG_SLIP_SMART
1179/* function do_ioctl called from net/core/dev.c
1180 to allow get/set outfill/keepalive parameter
1181 by ifconfig */
1182
1183static int sl_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1184{
1185 struct slip *sl = netdev_priv(dev);
1186 unsigned long *p = (unsigned long *)&rq->ifr_ifru;
1187
1188 if (sl == NULL) /* Allocation failed ?? */
1189 return -ENODEV;
1190
1191 spin_lock_bh(&sl->lock);
1192
1193 if (!sl->tty) {
1194 spin_unlock_bh(&sl->lock);
1195 return -ENODEV;
1196 }
1197
1198 switch (cmd) {
1199 case SIOCSKEEPALIVE:
1200 /* max for unchar */
1201 if ((unsigned)*p > 255) {
1202 spin_unlock_bh(&sl->lock);
1203 return -EINVAL;
1204 }
1205 sl->keepalive = (u8)*p;
1206 if (sl->keepalive != 0) {
1207 sl->keepalive_timer.expires =
1208 jiffies + sl->keepalive * HZ;
1209 mod_timer(&sl->keepalive_timer,
1210 jiffies + sl->keepalive * HZ);
1211 set_bit(SLF_KEEPTEST, &sl->flags);
1212 } else
1213 del_timer(&sl->keepalive_timer);
1214 break;
1215
1216 case SIOCGKEEPALIVE:
1217 *p = sl->keepalive;
1218 break;
1219
1220 case SIOCSOUTFILL:
1221 if ((unsigned)*p > 255) { /* max for unchar */
1222 spin_unlock_bh(&sl->lock);
1223 return -EINVAL;
1224 }
1225 sl->outfill = (u8)*p;
1226 if (sl->outfill != 0) {
1227 mod_timer(&sl->outfill_timer,
1228 jiffies + sl->outfill * HZ);
1229 set_bit(SLF_OUTWAIT, &sl->flags);
1230 } else
1231 del_timer(&sl->outfill_timer);
1232 break;
1233
1234 case SIOCGOUTFILL:
1235 *p = sl->outfill;
1236 break;
1237
1238 case SIOCSLEASE:
1239 /* Resolve race condition, when ioctl'ing hanged up
1240 and opened by another process device.
1241 */
1242 if (sl->tty != current->signal->tty &&
1243 sl->pid != current->pid) {
1244 spin_unlock_bh(&sl->lock);
1245 return -EPERM;
1246 }
1247 sl->leased = 0;
1248 if (*p)
1249 sl->leased = 1;
1250 break;
1251
1252 case SIOCGLEASE:
1253 *p = sl->leased;
1254 }
1255 spin_unlock_bh(&sl->lock);
1256 return 0;
1257}
1258#endif
1259/* VSV changes end */
1260
1261static struct tty_ldisc_ops sl_ldisc = {
1262 .owner = THIS_MODULE,
1263 .magic = TTY_LDISC_MAGIC,
1264 .name = "slip",
1265 .open = slip_open,
1266 .close = slip_close,
1267 .hangup = slip_hangup,
1268 .ioctl = slip_ioctl,
1269#ifdef CONFIG_COMPAT
1270 .compat_ioctl = slip_compat_ioctl,
1271#endif
1272 .receive_buf = slip_receive_buf,
1273 .write_wakeup = slip_write_wakeup,
1274};
1275
1276static int __init slip_init(void)
1277{
1278 int status;
1279
1280 if (slip_maxdev < 4)
1281 slip_maxdev = 4; /* Sanity */
1282
1283 printk(KERN_INFO "SLIP: version %s (dynamic channels, max=%d)"
1284#ifdef CONFIG_SLIP_MODE_SLIP6
1285 " (6 bit encapsulation enabled)"
1286#endif
1287 ".\n",
1288 SLIP_VERSION, slip_maxdev);
1289#if defined(SL_INCLUDE_CSLIP)
1290 printk(KERN_INFO "CSLIP: code copyright 1989 Regents of the University of California.\n");
1291#endif
1292#ifdef CONFIG_SLIP_SMART
1293 printk(KERN_INFO "SLIP linefill/keepalive option.\n");
1294#endif
1295
1296 slip_devs = kzalloc(sizeof(struct net_device *)*slip_maxdev,
1297 GFP_KERNEL);
1298 if (!slip_devs)
1299 return -ENOMEM;
1300
1301 /* Fill in our line protocol discipline, and register it */
1302 status = tty_register_ldisc(N_SLIP, &sl_ldisc);
1303 if (status != 0) {
1304 printk(KERN_ERR "SLIP: can't register line discipline (err = %d)\n", status);
1305 kfree(slip_devs);
1306 }
1307 return status;
1308}
1309
1310static void __exit slip_exit(void)
1311{
1312 int i;
1313 struct net_device *dev;
1314 struct slip *sl;
1315 unsigned long timeout = jiffies + HZ;
1316 int busy = 0;
1317
1318 if (slip_devs == NULL)
1319 return;
1320
1321 /* First of all: check for active disciplines and hangup them.
1322 */
1323 do {
1324 if (busy)
1325 msleep_interruptible(100);
1326
1327 busy = 0;
1328 for (i = 0; i < slip_maxdev; i++) {
1329 dev = slip_devs[i];
1330 if (!dev)
1331 continue;
1332 sl = netdev_priv(dev);
1333 spin_lock_bh(&sl->lock);
1334 if (sl->tty) {
1335 busy++;
1336 tty_hangup(sl->tty);
1337 }
1338 spin_unlock_bh(&sl->lock);
1339 }
1340 } while (busy && time_before(jiffies, timeout));
1341
1342 /* FIXME: hangup is async so we should wait when doing this second
1343 phase */
1344
1345 for (i = 0; i < slip_maxdev; i++) {
1346 dev = slip_devs[i];
1347 if (!dev)
1348 continue;
1349 slip_devs[i] = NULL;
1350
1351 sl = netdev_priv(dev);
1352 if (sl->tty) {
1353 printk(KERN_ERR "%s: tty discipline still running\n",
1354 dev->name);
1355 /* Intentionally leak the control block. */
1356 dev->destructor = NULL;
1357 }
1358
1359 unregister_netdev(dev);
1360 }
1361
1362 kfree(slip_devs);
1363 slip_devs = NULL;
1364
1365 i = tty_unregister_ldisc(N_SLIP);
1366 if (i != 0)
1367 printk(KERN_ERR "SLIP: can't unregister line discipline (err = %d)\n", i);
1368}
1369
1370module_init(slip_init);
1371module_exit(slip_exit);
1372
1373#ifdef CONFIG_SLIP_SMART
1374/*
1375 * This is start of the code for multislip style line checking
1376 * added by Stanislav Voronyi. All changes before marked VSV
1377 */
1378
1379static void sl_outfill(unsigned long sls)
1380{
1381 struct slip *sl = (struct slip *)sls;
1382
1383 spin_lock(&sl->lock);
1384
1385 if (sl->tty == NULL)
1386 goto out;
1387
1388 if (sl->outfill) {
1389 if (test_bit(SLF_OUTWAIT, &sl->flags)) {
1390 /* no packets were transmitted, do outfill */
1391#ifdef CONFIG_SLIP_MODE_SLIP6
1392 unsigned char s = (sl->mode & SL_MODE_SLIP6)?0x70:END;
1393#else
1394 unsigned char s = END;
1395#endif
1396 /* put END into tty queue. Is it right ??? */
1397 if (!netif_queue_stopped(sl->dev)) {
1398 /* if device busy no outfill */
1399 sl->tty->ops->write(sl->tty, &s, 1);
1400 }
1401 } else
1402 set_bit(SLF_OUTWAIT, &sl->flags);
1403
1404 mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
1405 }
1406out:
1407 spin_unlock(&sl->lock);
1408}
1409
1410static void sl_keepalive(unsigned long sls)
1411{
1412 struct slip *sl = (struct slip *)sls;
1413
1414 spin_lock(&sl->lock);
1415
1416 if (sl->tty == NULL)
1417 goto out;
1418
1419 if (sl->keepalive) {
1420 if (test_bit(SLF_KEEPTEST, &sl->flags)) {
1421 /* keepalive still high :(, we must hangup */
1422 if (sl->outfill)
1423 /* outfill timer must be deleted too */
1424 (void)del_timer(&sl->outfill_timer);
1425 printk(KERN_DEBUG "%s: no packets received during keepalive timeout, hangup.\n", sl->dev->name);
1426 /* this must hangup tty & close slip */
1427 tty_hangup(sl->tty);
1428 /* I think we need not something else */
1429 goto out;
1430 } else
1431 set_bit(SLF_KEEPTEST, &sl->flags);
1432
1433 mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
1434 }
1435out:
1436 spin_unlock(&sl->lock);
1437}
1438
1439#endif
1440MODULE_LICENSE("GPL");
1441MODULE_ALIAS_LDISC(N_SLIP);