Loading...
1/*
2 * Common routines for Tundra Semiconductor TSI108 host bridge.
3 *
4 * 2004-2005 (c) Tundra Semiconductor Corp.
5 * Author: Alex Bounine (alexandreb@tundra.com)
6 * Author: Roy Zang (tie-fei.zang@freescale.com)
7 * Add pci interrupt router host
8 *
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the Free
11 * Software Foundation; either version 2 of the License, or (at your option)
12 * any later version.
13 *
14 * This program is distributed in the hope that it will be useful, but WITHOUT
15 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
16 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * more details.
18 *
19 * You should have received a copy of the GNU General Public License along with
20 * this program; if not, write to the Free Software Foundation, Inc., 59
21 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
22 */
23
24#include <linux/kernel.h>
25#include <linux/init.h>
26#include <linux/pci.h>
27#include <linux/irq.h>
28#include <linux/interrupt.h>
29
30#include <asm/byteorder.h>
31#include <asm/io.h>
32#include <asm/irq.h>
33#include <linux/uaccess.h>
34#include <asm/machdep.h>
35#include <asm/pci-bridge.h>
36#include <asm/tsi108.h>
37#include <asm/tsi108_pci.h>
38#include <asm/tsi108_irq.h>
39#include <asm/prom.h>
40
41#undef DEBUG
42#ifdef DEBUG
43#define DBG(x...) printk(x)
44#else
45#define DBG(x...)
46#endif
47
48#define tsi_mk_config_addr(bus, devfunc, offset) \
49 ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
50
51u32 tsi108_pci_cfg_base;
52static u32 tsi108_pci_cfg_phys;
53u32 tsi108_csr_vir_base;
54static struct irq_domain *pci_irq_host;
55
56extern u32 get_vir_csrbase(void);
57extern u32 tsi108_read_reg(u32 reg_offset);
58extern void tsi108_write_reg(u32 reg_offset, u32 val);
59
60int
61tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
62 int offset, int len, u32 val)
63{
64 volatile unsigned char *cfg_addr;
65 struct pci_controller *hose = pci_bus_to_host(bus);
66
67 if (ppc_md.pci_exclude_device)
68 if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
69 return PCIBIOS_DEVICE_NOT_FOUND;
70
71 cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
72 devfunc, offset) |
73 (offset & 0x03));
74
75#ifdef DEBUG
76 printk("PCI CFG write : ");
77 printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
78 printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
79 printk("data = 0x%08x\n", val);
80#endif
81
82 switch (len) {
83 case 1:
84 out_8((u8 *) cfg_addr, val);
85 break;
86 case 2:
87 out_le16((u16 *) cfg_addr, val);
88 break;
89 default:
90 out_le32((u32 *) cfg_addr, val);
91 break;
92 }
93
94 return PCIBIOS_SUCCESSFUL;
95}
96
97void tsi108_clear_pci_error(u32 pci_cfg_base)
98{
99 u32 err_stat, err_addr, pci_stat;
100
101 /*
102 * Quietly clear PB and PCI error flags set as result
103 * of PCI/X configuration read requests.
104 */
105
106 /* Read PB Error Log Registers */
107
108 err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
109 err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);
110
111 if (err_stat & TSI108_PB_ERRCS_ES) {
112 /* Clear error flag */
113 tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
114 TSI108_PB_ERRCS_ES);
115
116 /* Clear read error reported in PB_ISR */
117 tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
118 TSI108_PB_ISR_PBS_RD_ERR);
119
120 /* Clear PCI/X bus cfg errors if applicable */
121 if ((err_addr & 0xFF000000) == pci_cfg_base) {
122 pci_stat =
123 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
124 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
125 pci_stat);
126 }
127 }
128
129 return;
130}
131
132#define __tsi108_read_pci_config(x, addr, op) \
133 __asm__ __volatile__( \
134 " "op" %0,0,%1\n" \
135 "1: eieio\n" \
136 "2:\n" \
137 ".section .fixup,\"ax\"\n" \
138 "3: li %0,-1\n" \
139 " b 2b\n" \
140 ".previous\n" \
141 EX_TABLE(1b, 3b) \
142 : "=r"(x) : "r"(addr))
143
144int
145tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
146 int len, u32 * val)
147{
148 volatile unsigned char *cfg_addr;
149 struct pci_controller *hose = pci_bus_to_host(bus);
150 u32 temp;
151
152 if (ppc_md.pci_exclude_device)
153 if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
154 return PCIBIOS_DEVICE_NOT_FOUND;
155
156 cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
157 devfn,
158 offset) | (offset &
159 0x03));
160
161 switch (len) {
162 case 1:
163 __tsi108_read_pci_config(temp, cfg_addr, "lbzx");
164 break;
165 case 2:
166 __tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
167 break;
168 default:
169 __tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
170 break;
171 }
172
173 *val = temp;
174
175#ifdef DEBUG
176 if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
177 printk("PCI CFG read : ");
178 printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
179 printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
180 printk("data = 0x%x\n", *val);
181 }
182#endif
183 return PCIBIOS_SUCCESSFUL;
184}
185
186void tsi108_clear_pci_cfg_error(void)
187{
188 tsi108_clear_pci_error(tsi108_pci_cfg_phys);
189}
190
191static struct pci_ops tsi108_direct_pci_ops = {
192 .read = tsi108_direct_read_config,
193 .write = tsi108_direct_write_config,
194};
195
196int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
197{
198 int len;
199 struct pci_controller *hose;
200 struct resource rsrc;
201 const int *bus_range;
202 int has_address = 0;
203
204 /* PCI Config mapping */
205 tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
206 tsi108_pci_cfg_phys = cfg_phys;
207 DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
208 tsi108_pci_cfg_base);
209
210 /* Fetch host bridge registers address */
211 has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
212
213 /* Get bus range if any */
214 bus_range = of_get_property(dev, "bus-range", &len);
215 if (bus_range == NULL || len < 2 * sizeof(int)) {
216 printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
217 " bus 0\n", dev);
218 }
219
220 hose = pcibios_alloc_controller(dev);
221
222 if (!hose) {
223 printk("PCI Host bridge init failed\n");
224 return -ENOMEM;
225 }
226
227 hose->first_busno = bus_range ? bus_range[0] : 0;
228 hose->last_busno = bus_range ? bus_range[1] : 0xff;
229
230 (hose)->ops = &tsi108_direct_pci_ops;
231
232 printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
233 "Firmware bus number: %d->%d\n",
234 rsrc.start, hose->first_busno, hose->last_busno);
235
236 /* Interpret the "ranges" property */
237 /* This also maps the I/O region and sets isa_io/mem_base */
238 pci_process_bridge_OF_ranges(hose, dev, primary);
239 return 0;
240}
241
242/*
243 * Low level utility functions
244 */
245
246static void tsi108_pci_int_mask(u_int irq)
247{
248 u_int irp_cfg;
249 int int_line = (irq - IRQ_PCI_INTAD_BASE);
250
251 irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
252 mb();
253 irp_cfg |= (1 << int_line); /* INTx_DIR = output */
254 irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */
255 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
256 mb();
257 irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
258}
259
260static void tsi108_pci_int_unmask(u_int irq)
261{
262 u_int irp_cfg;
263 int int_line = (irq - IRQ_PCI_INTAD_BASE);
264
265 irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
266 mb();
267 irp_cfg &= ~(1 << int_line);
268 irp_cfg |= (3 << (8 + (int_line * 2)));
269 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
270 mb();
271}
272
273static void init_pci_source(void)
274{
275 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
276 0x0000ff00);
277 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
278 TSI108_PCI_IRP_ENABLE_P_INT);
279 mb();
280}
281
282static inline unsigned int get_pci_source(void)
283{
284 u_int temp = 0;
285 int irq = -1;
286 int i;
287 u_int pci_irp_stat;
288 static int mask = 0;
289
290 /* Read PCI/X block interrupt status register */
291 pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
292 mb();
293
294 if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
295 /* Process Interrupt from PCI bus INTA# - INTD# lines */
296 temp =
297 tsi108_read_reg(TSI108_PCI_OFFSET +
298 TSI108_PCI_IRP_INTAD) & 0xf;
299 mb();
300 for (i = 0; i < 4; i++, mask++) {
301 if (temp & (1 << mask % 4)) {
302 irq = IRQ_PCI_INTA + mask % 4;
303 mask++;
304 break;
305 }
306 }
307
308 /* Disable interrupts from PCI block */
309 temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
310 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
311 temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
312 mb();
313 (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
314 mb();
315 }
316#ifdef DEBUG
317 else {
318 printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
319 pci_irp_stat =
320 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
321 temp =
322 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
323 mb();
324 printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
325 temp =
326 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
327 mb();
328 printk("cfg_ctl=0x%08x ", temp);
329 temp =
330 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
331 mb();
332 printk("irp_enable=0x%08x\n", temp);
333 }
334#endif /* end of DEBUG */
335
336 return irq;
337}
338
339
340/*
341 * Linux descriptor level callbacks
342 */
343
344static void tsi108_pci_irq_unmask(struct irq_data *d)
345{
346 tsi108_pci_int_unmask(d->irq);
347
348 /* Enable interrupts from PCI block */
349 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
350 tsi108_read_reg(TSI108_PCI_OFFSET +
351 TSI108_PCI_IRP_ENABLE) |
352 TSI108_PCI_IRP_ENABLE_P_INT);
353 mb();
354}
355
356static void tsi108_pci_irq_mask(struct irq_data *d)
357{
358 tsi108_pci_int_mask(d->irq);
359}
360
361static void tsi108_pci_irq_ack(struct irq_data *d)
362{
363 tsi108_pci_int_mask(d->irq);
364}
365
366/*
367 * Interrupt controller descriptor for cascaded PCI interrupt controller.
368 */
369
370static struct irq_chip tsi108_pci_irq = {
371 .name = "tsi108_PCI_int",
372 .irq_mask = tsi108_pci_irq_mask,
373 .irq_ack = tsi108_pci_irq_ack,
374 .irq_unmask = tsi108_pci_irq_unmask,
375};
376
377static int pci_irq_host_xlate(struct irq_domain *h, struct device_node *ct,
378 const u32 *intspec, unsigned int intsize,
379 irq_hw_number_t *out_hwirq, unsigned int *out_flags)
380{
381 *out_hwirq = intspec[0];
382 *out_flags = IRQ_TYPE_LEVEL_HIGH;
383 return 0;
384}
385
386static int pci_irq_host_map(struct irq_domain *h, unsigned int virq,
387 irq_hw_number_t hw)
388{ unsigned int irq;
389 DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
390 if ((virq >= 1) && (virq <= 4)){
391 irq = virq + IRQ_PCI_INTAD_BASE - 1;
392 irq_set_status_flags(irq, IRQ_LEVEL);
393 irq_set_chip(irq, &tsi108_pci_irq);
394 }
395 return 0;
396}
397
398static const struct irq_domain_ops pci_irq_domain_ops = {
399 .map = pci_irq_host_map,
400 .xlate = pci_irq_host_xlate,
401};
402
403/*
404 * Exported functions
405 */
406
407/*
408 * The Tsi108 PCI interrupts initialization routine.
409 *
410 * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
411 * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
412 * PCI block has to be treated as a cascaded interrupt controller connected
413 * to the MPIC.
414 */
415
416void __init tsi108_pci_int_init(struct device_node *node)
417{
418 DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
419
420 pci_irq_host = irq_domain_add_legacy_isa(node, &pci_irq_domain_ops, NULL);
421 if (pci_irq_host == NULL) {
422 printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n");
423 return;
424 }
425
426 init_pci_source();
427}
428
429void tsi108_irq_cascade(struct irq_desc *desc)
430{
431 struct irq_chip *chip = irq_desc_get_chip(desc);
432 unsigned int cascade_irq = get_pci_source();
433
434 if (cascade_irq)
435 generic_handle_irq(cascade_irq);
436
437 chip->irq_eoi(&desc->irq_data);
438}
1/*
2 * Common routines for Tundra Semiconductor TSI108 host bridge.
3 *
4 * 2004-2005 (c) Tundra Semiconductor Corp.
5 * Author: Alex Bounine (alexandreb@tundra.com)
6 * Author: Roy Zang (tie-fei.zang@freescale.com)
7 * Add pci interrupt router host
8 *
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the Free
11 * Software Foundation; either version 2 of the License, or (at your option)
12 * any later version.
13 *
14 * This program is distributed in the hope that it will be useful, but WITHOUT
15 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
16 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * more details.
18 *
19 * You should have received a copy of the GNU General Public License along with
20 * this program; if not, write to the Free Software Foundation, Inc., 59
21 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
22 */
23
24#include <linux/kernel.h>
25#include <linux/init.h>
26#include <linux/pci.h>
27#include <linux/irq.h>
28#include <linux/interrupt.h>
29
30#include <asm/byteorder.h>
31#include <asm/io.h>
32#include <asm/irq.h>
33#include <asm/uaccess.h>
34#include <asm/machdep.h>
35#include <asm/pci-bridge.h>
36#include <asm/tsi108.h>
37#include <asm/tsi108_pci.h>
38#include <asm/tsi108_irq.h>
39#include <asm/prom.h>
40
41#undef DEBUG
42#ifdef DEBUG
43#define DBG(x...) printk(x)
44#else
45#define DBG(x...)
46#endif
47
48#define tsi_mk_config_addr(bus, devfunc, offset) \
49 ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
50
51u32 tsi108_pci_cfg_base;
52static u32 tsi108_pci_cfg_phys;
53u32 tsi108_csr_vir_base;
54static struct irq_domain *pci_irq_host;
55
56extern u32 get_vir_csrbase(void);
57extern u32 tsi108_read_reg(u32 reg_offset);
58extern void tsi108_write_reg(u32 reg_offset, u32 val);
59
60int
61tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
62 int offset, int len, u32 val)
63{
64 volatile unsigned char *cfg_addr;
65 struct pci_controller *hose = pci_bus_to_host(bus);
66
67 if (ppc_md.pci_exclude_device)
68 if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
69 return PCIBIOS_DEVICE_NOT_FOUND;
70
71 cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
72 devfunc, offset) |
73 (offset & 0x03));
74
75#ifdef DEBUG
76 printk("PCI CFG write : ");
77 printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
78 printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
79 printk("data = 0x%08x\n", val);
80#endif
81
82 switch (len) {
83 case 1:
84 out_8((u8 *) cfg_addr, val);
85 break;
86 case 2:
87 out_le16((u16 *) cfg_addr, val);
88 break;
89 default:
90 out_le32((u32 *) cfg_addr, val);
91 break;
92 }
93
94 return PCIBIOS_SUCCESSFUL;
95}
96
97void tsi108_clear_pci_error(u32 pci_cfg_base)
98{
99 u32 err_stat, err_addr, pci_stat;
100
101 /*
102 * Quietly clear PB and PCI error flags set as result
103 * of PCI/X configuration read requests.
104 */
105
106 /* Read PB Error Log Registers */
107
108 err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
109 err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);
110
111 if (err_stat & TSI108_PB_ERRCS_ES) {
112 /* Clear error flag */
113 tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
114 TSI108_PB_ERRCS_ES);
115
116 /* Clear read error reported in PB_ISR */
117 tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
118 TSI108_PB_ISR_PBS_RD_ERR);
119
120 /* Clear PCI/X bus cfg errors if applicable */
121 if ((err_addr & 0xFF000000) == pci_cfg_base) {
122 pci_stat =
123 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
124 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
125 pci_stat);
126 }
127 }
128
129 return;
130}
131
132#define __tsi108_read_pci_config(x, addr, op) \
133 __asm__ __volatile__( \
134 " "op" %0,0,%1\n" \
135 "1: eieio\n" \
136 "2:\n" \
137 ".section .fixup,\"ax\"\n" \
138 "3: li %0,-1\n" \
139 " b 2b\n" \
140 ".section __ex_table,\"a\"\n" \
141 " .align 2\n" \
142 " .long 1b,3b\n" \
143 ".text" \
144 : "=r"(x) : "r"(addr))
145
146int
147tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
148 int len, u32 * val)
149{
150 volatile unsigned char *cfg_addr;
151 struct pci_controller *hose = pci_bus_to_host(bus);
152 u32 temp;
153
154 if (ppc_md.pci_exclude_device)
155 if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
156 return PCIBIOS_DEVICE_NOT_FOUND;
157
158 cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
159 devfn,
160 offset) | (offset &
161 0x03));
162
163 switch (len) {
164 case 1:
165 __tsi108_read_pci_config(temp, cfg_addr, "lbzx");
166 break;
167 case 2:
168 __tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
169 break;
170 default:
171 __tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
172 break;
173 }
174
175 *val = temp;
176
177#ifdef DEBUG
178 if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
179 printk("PCI CFG read : ");
180 printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
181 printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
182 printk("data = 0x%x\n", *val);
183 }
184#endif
185 return PCIBIOS_SUCCESSFUL;
186}
187
188void tsi108_clear_pci_cfg_error(void)
189{
190 tsi108_clear_pci_error(tsi108_pci_cfg_phys);
191}
192
193static struct pci_ops tsi108_direct_pci_ops = {
194 .read = tsi108_direct_read_config,
195 .write = tsi108_direct_write_config,
196};
197
198int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
199{
200 int len;
201 struct pci_controller *hose;
202 struct resource rsrc;
203 const int *bus_range;
204 int has_address = 0;
205
206 /* PCI Config mapping */
207 tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
208 tsi108_pci_cfg_phys = cfg_phys;
209 DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
210 tsi108_pci_cfg_base);
211
212 /* Fetch host bridge registers address */
213 has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
214
215 /* Get bus range if any */
216 bus_range = of_get_property(dev, "bus-range", &len);
217 if (bus_range == NULL || len < 2 * sizeof(int)) {
218 printk(KERN_WARNING "Can't get bus-range for %s, assume"
219 " bus 0\n", dev->full_name);
220 }
221
222 hose = pcibios_alloc_controller(dev);
223
224 if (!hose) {
225 printk("PCI Host bridge init failed\n");
226 return -ENOMEM;
227 }
228
229 hose->first_busno = bus_range ? bus_range[0] : 0;
230 hose->last_busno = bus_range ? bus_range[1] : 0xff;
231
232 (hose)->ops = &tsi108_direct_pci_ops;
233
234 printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
235 "Firmware bus number: %d->%d\n",
236 rsrc.start, hose->first_busno, hose->last_busno);
237
238 /* Interpret the "ranges" property */
239 /* This also maps the I/O region and sets isa_io/mem_base */
240 pci_process_bridge_OF_ranges(hose, dev, primary);
241 return 0;
242}
243
244/*
245 * Low level utility functions
246 */
247
248static void tsi108_pci_int_mask(u_int irq)
249{
250 u_int irp_cfg;
251 int int_line = (irq - IRQ_PCI_INTAD_BASE);
252
253 irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
254 mb();
255 irp_cfg |= (1 << int_line); /* INTx_DIR = output */
256 irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */
257 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
258 mb();
259 irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
260}
261
262static void tsi108_pci_int_unmask(u_int irq)
263{
264 u_int irp_cfg;
265 int int_line = (irq - IRQ_PCI_INTAD_BASE);
266
267 irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
268 mb();
269 irp_cfg &= ~(1 << int_line);
270 irp_cfg |= (3 << (8 + (int_line * 2)));
271 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
272 mb();
273}
274
275static void init_pci_source(void)
276{
277 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
278 0x0000ff00);
279 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
280 TSI108_PCI_IRP_ENABLE_P_INT);
281 mb();
282}
283
284static inline unsigned int get_pci_source(void)
285{
286 u_int temp = 0;
287 int irq = -1;
288 int i;
289 u_int pci_irp_stat;
290 static int mask = 0;
291
292 /* Read PCI/X block interrupt status register */
293 pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
294 mb();
295
296 if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
297 /* Process Interrupt from PCI bus INTA# - INTD# lines */
298 temp =
299 tsi108_read_reg(TSI108_PCI_OFFSET +
300 TSI108_PCI_IRP_INTAD) & 0xf;
301 mb();
302 for (i = 0; i < 4; i++, mask++) {
303 if (temp & (1 << mask % 4)) {
304 irq = IRQ_PCI_INTA + mask % 4;
305 mask++;
306 break;
307 }
308 }
309
310 /* Disable interrupts from PCI block */
311 temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
312 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
313 temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
314 mb();
315 (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
316 mb();
317 }
318#ifdef DEBUG
319 else {
320 printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
321 pci_irp_stat =
322 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
323 temp =
324 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
325 mb();
326 printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
327 temp =
328 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
329 mb();
330 printk("cfg_ctl=0x%08x ", temp);
331 temp =
332 tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
333 mb();
334 printk("irp_enable=0x%08x\n", temp);
335 }
336#endif /* end of DEBUG */
337
338 return irq;
339}
340
341
342/*
343 * Linux descriptor level callbacks
344 */
345
346static void tsi108_pci_irq_unmask(struct irq_data *d)
347{
348 tsi108_pci_int_unmask(d->irq);
349
350 /* Enable interrupts from PCI block */
351 tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
352 tsi108_read_reg(TSI108_PCI_OFFSET +
353 TSI108_PCI_IRP_ENABLE) |
354 TSI108_PCI_IRP_ENABLE_P_INT);
355 mb();
356}
357
358static void tsi108_pci_irq_mask(struct irq_data *d)
359{
360 tsi108_pci_int_mask(d->irq);
361}
362
363static void tsi108_pci_irq_ack(struct irq_data *d)
364{
365 tsi108_pci_int_mask(d->irq);
366}
367
368/*
369 * Interrupt controller descriptor for cascaded PCI interrupt controller.
370 */
371
372static struct irq_chip tsi108_pci_irq = {
373 .name = "tsi108_PCI_int",
374 .irq_mask = tsi108_pci_irq_mask,
375 .irq_ack = tsi108_pci_irq_ack,
376 .irq_unmask = tsi108_pci_irq_unmask,
377};
378
379static int pci_irq_host_xlate(struct irq_domain *h, struct device_node *ct,
380 const u32 *intspec, unsigned int intsize,
381 irq_hw_number_t *out_hwirq, unsigned int *out_flags)
382{
383 *out_hwirq = intspec[0];
384 *out_flags = IRQ_TYPE_LEVEL_HIGH;
385 return 0;
386}
387
388static int pci_irq_host_map(struct irq_domain *h, unsigned int virq,
389 irq_hw_number_t hw)
390{ unsigned int irq;
391 DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
392 if ((virq >= 1) && (virq <= 4)){
393 irq = virq + IRQ_PCI_INTAD_BASE - 1;
394 irq_set_status_flags(irq, IRQ_LEVEL);
395 irq_set_chip(irq, &tsi108_pci_irq);
396 }
397 return 0;
398}
399
400static struct irq_domain_ops pci_irq_domain_ops = {
401 .map = pci_irq_host_map,
402 .xlate = pci_irq_host_xlate,
403};
404
405/*
406 * Exported functions
407 */
408
409/*
410 * The Tsi108 PCI interrupts initialization routine.
411 *
412 * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
413 * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
414 * PCI block has to be treated as a cascaded interrupt controller connected
415 * to the MPIC.
416 */
417
418void __init tsi108_pci_int_init(struct device_node *node)
419{
420 DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
421
422 pci_irq_host = irq_domain_add_legacy_isa(node, &pci_irq_domain_ops, NULL);
423 if (pci_irq_host == NULL) {
424 printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n");
425 return;
426 }
427
428 init_pci_source();
429}
430
431void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc)
432{
433 struct irq_chip *chip = irq_desc_get_chip(desc);
434 unsigned int cascade_irq = get_pci_source();
435
436 if (cascade_irq != NO_IRQ)
437 generic_handle_irq(cascade_irq);
438
439 chip->irq_eoi(&desc->irq_data);
440}