1/*
  2 * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
  3 *
  4 *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  5 *
  6 * Licensed under GPLv2 only
  7 */
  8/dts-v1/;
  9#include "at91sam9263.dtsi"
 10
 11/ {
 12	model = "Calao TNY A9263";
 13	compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9";
 14
 15	chosen {
 16		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
 17	};
 18
 19	memory {
 20		reg = <0x20000000 0x4000000>;
 21	};
 22
 23	clocks {
 24		slow_xtal {
 25			clock-frequency = <32768>;
 26		};
 27
 28		main_xtal {
 
 29			clock-frequency = <12000000>;
 30		};
 31	};
 32
 33	ahb {
 34		apb {
 35			dbgu: serial@ffffee00 {
 36				status = "okay";
 37			};
 38
 39			tcb0: timer@fff7c000 {
 40				timer@0 {
 41					compatible = "atmel,tcb-timer";
 42					reg = <0>, <1>;
 43				};
 44
 45				timer@2 {
 46					compatible = "atmel,tcb-timer";
 47					reg = <2>;
 48				};
 49			};
 50
 51			usb1: gadget@fff78000 {
 52				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
 53				status = "okay";
 54			};
 55		};
 56
 57		ebi0: ebi@10000000 {
 
 
 
 58			status = "okay";
 59
 60			nand_controller: nand-controller {
 61				status = "okay";
 62				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
 63				pinctrl-names = "default";
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 64
 65				nand@3 {
 66					reg = <0x3 0x0 0x800000>;
 67					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
 68					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
 69					nand-bus-width = <8>;
 70					nand-ecc-mode = "soft";
 71					nand-on-flash-bbt;
 72					label = "atmel_nand";
 73
 74					partitions {
 75						compatible = "fixed-partitions";
 76						#address-cells = <1>;
 77						#size-cells = <1>;
 78
 79						at91bootstrap@0 {
 80							label = "at91bootstrap";
 81							reg = <0x0 0x20000>;
 82						};
 83
 84						barebox@20000 {
 85							label = "barebox";
 86							reg = <0x20000 0x40000>;
 87						};
 88
 89						bareboxenv@60000 {
 90							label = "bareboxenv";
 91							reg = <0x60000 0x20000>;
 92						};
 93
 94						bareboxenv2@80000 {
 95							label = "bareboxenv2";
 96							reg = <0x80000 0x20000>;
 97						};
 98
 99						oftree@80000 {
100							label = "oftree";
101							reg = <0xa0000 0x20000>;
102						};
103
104						kernel@a0000 {
105							label = "kernel";
106							reg = <0xc0000 0x400000>;
107						};
108
109						rootfs@4a0000 {
110							label = "rootfs";
111							reg = <0x4c0000 0x7800000>;
112						};
113
114						data@7ca0000 {
115							label = "data";
116							reg = <0x7cc0000 0x8340000>;
117						};
118					};
119				};
120			};
121		};
122	};
123
124	i2c-gpio-0 {
125		status = "okay";
126	};
127};

 1/*
 2 * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
 3 *
 4 *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 5 *
 6 * Licensed under GPLv2 only
 7 */
 8/dts-v1/;
 9/include/ "at91sam9263.dtsi"
10
11/ {
12	model = "Calao TNY A9263";
13	compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9";
14
15	chosen {
16		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
17	};
18
19	memory {
20		reg = <0x20000000 0x4000000>;
21	};
22
23	clocks {
24		#address-cells = <1>;
25		#size-cells = <1>;
26		ranges;
27
28		main_clock: clock@0 {
29			compatible = "atmel,osc", "fixed-clock";
30			clock-frequency = <12000000>;
31		};
32	};
33
34	ahb {
35		apb {
36			dbgu: serial@ffffee00 {
37				status = "okay";
38			};
39
 
 
 
 
 
 
 
 
 
 
 
 
40			usb1: gadget@fff78000 {
41				atmel,vbus-gpio = <&pioB 11 0>;
42				status = "okay";
43			};
44		};
45
46		nand0: nand@40000000 {
47			nand-bus-width = <8>;
48			nand-ecc-mode = "soft";
49			nand-on-flash-bbt;
50			status = "okay";
51
52			at91bootstrap@0 {
53				label = "at91bootstrap";
54				reg = <0x0 0x20000>;
55			};
56
57			barebox@20000 {
58				label = "barebox";
59				reg = <0x20000 0x40000>;
60			};
61
62			bareboxenv@60000 {
63				label = "bareboxenv";
64				reg = <0x60000 0x20000>;
65			};
66
67			bareboxenv2@80000 {
68				label = "bareboxenv2";
69				reg = <0x80000 0x20000>;
70			};
71
72			oftree@80000 {
73				label = "oftree";
74				reg = <0xa0000 0x20000>;
75			};
76
77			kernel@a0000 {
78				label = "kernel";
79				reg = <0xc0000 0x400000>;
80			};
81
82			rootfs@4a0000 {
83				label = "rootfs";
84				reg = <0x4c0000 0x7800000>;
85			};
86
87			data@7ca0000 {
88				label = "data";
89				reg = <0x7cc0000 0x8340000>;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
90			};
91		};
92	};
93
94	i2c@0 {
95		status = "okay";
96	};
97};