1// SPDX-License-Identifier: GPL-2.0
  2/ {
  3	model = "QNAP TS219 family";
  4	compatible = "qnap,ts219", "marvell,kirkwood";
  5
  6	memory {
  7		device_type = "memory";
  8		reg = <0x00000000 0x20000000>;
  9	};
 10
 11	chosen {
 12		bootargs = "console=ttyS0,115200n8";
 13		stdout-path = &uart0;
 14	};
 15
 16	ocp@f1000000 {
 17		i2c@11000 {
 18			status = "okay";
 19			clock-frequency = <400000>;
 20
 21			s35390a: s35390a@30 {
 22				compatible = "s35390a";
 23				reg = <0x30>;
 24			};
 25		};
 26		serial@12000 {
 27			status = "okay";
 28		};
 29		serial@12100 {
 30			status = "okay";
 31		};
 32		poweroff@12100 {
 33			compatible = "qnap,power-off";
 34			reg = <0x12100 0x100>;
 35			clocks = <&gate_clk 7>;
 36		};
 37		spi@10600 {
 38			status = "okay";
 39
 40			m25p128@0 {
 41				#address-cells = <1>;
 42				#size-cells = <1>;
 43				compatible = "m25p128", "jedec,spi-nor";
 44				reg = <0>;
 45				spi-max-frequency = <20000000>;
 46				mode = <0>;
 47
 48				partition@0 {
 49					reg = <0x00000000 0x00080000>;
 50					label = "U-Boot";
 51				};
 52
 53				partition@200000 {
 54					reg = <0x00200000 0x00200000>;
 55					label = "Kernel";
 56				};
 57
 58				partition@400000 {
 59					reg = <0x00400000 0x00900000>;
 60					label = "RootFS1";
 61				};
 62				partition@d00000 {
 63					reg = <0x00d00000 0x00300000>;
 64					label = "RootFS2";
 65				};
 66				partition@40000 {
 67					reg = <0x00080000 0x00040000>;
 68					label = "U-Boot Config";
 69				};
 70				partition@c0000 {
 71					reg = <0x000c0000 0x00140000>;
 72					label = "NAS Config";
 73				};
 74			};
 75		};
 76		sata@80000 {
 77			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
 78			pinctrl-names = "default";
 79			status = "okay";
 80			nr-ports = <2>;
 81		};
 82	};
 83};
 84
 85&mdio {
 86	status = "okay";
 87
 88	ethphy0: ethernet-phy@X {
 89                /* overwrite reg property in board file */
 90	};
 91};
 92
 93&eth0 {
 94	status = "okay";
 95	ethernet0-port@0 {
 96		phy-handle = <&ethphy0>;
 97	};
 98};
 99
100&pciec {
101        status = "okay";
102};
103
104&pcie0 {
105	status = "okay";
106};