Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * usblp.c
4 *
5 * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com>
6 * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz>
7 * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net>
8 * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
9 # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
10 # Copyright (c) 2001 David Paschal <paschal@rcsis.com>
11 * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name>
12 *
13 * USB Printer Device Class driver for USB printers and printer cables
14 *
15 * Sponsored by SuSE
16 *
17 * ChangeLog:
18 * v0.1 - thorough cleaning, URBification, almost a rewrite
19 * v0.2 - some more cleanups
20 * v0.3 - cleaner again, waitqueue fixes
21 * v0.4 - fixes in unidirectional mode
22 * v0.5 - add DEVICE_ID string support
23 * v0.6 - never time out
24 * v0.7 - fixed bulk-IN read and poll (David Paschal)
25 * v0.8 - add devfs support
26 * v0.9 - fix unplug-while-open paths
27 * v0.10- remove sleep_on, fix error on oom (oliver@neukum.org)
28 * v0.11 - add proto_bias option (Pete Zaitcev)
29 * v0.12 - add hpoj.sourceforge.net ioctls (David Paschal)
30 * v0.13 - alloc space for statusbuf (<status> not on stack);
31 * use usb_alloc_coherent() for read buf & write buf;
32 * none - Maintained in Linux kernel after v0.13
33 */
34
35#include <linux/module.h>
36#include <linux/kernel.h>
37#include <linux/sched/signal.h>
38#include <linux/signal.h>
39#include <linux/poll.h>
40#include <linux/slab.h>
41#include <linux/lp.h>
42#include <linux/mutex.h>
43#undef DEBUG
44#include <linux/usb.h>
45#include <linux/usb/ch9.h>
46#include <linux/ratelimit.h>
47
48/*
49 * Version Information
50 */
51#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
52#define DRIVER_DESC "USB Printer Device Class driver"
53
54#define USBLP_BUF_SIZE 8192
55#define USBLP_BUF_SIZE_IN 1024
56#define USBLP_DEVICE_ID_SIZE 1024
57
58/* ioctls: */
59#define IOCNR_GET_DEVICE_ID 1
60#define IOCNR_GET_PROTOCOLS 2
61#define IOCNR_SET_PROTOCOL 3
62#define IOCNR_HP_SET_CHANNEL 4
63#define IOCNR_GET_BUS_ADDRESS 5
64#define IOCNR_GET_VID_PID 6
65#define IOCNR_SOFT_RESET 7
66/* Get device_id string: */
67#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
68/* The following ioctls were added for http://hpoj.sourceforge.net:
69 * Get two-int array:
70 * [0]=current protocol
71 * (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
72 * 3=USB_CLASS_PRINTER/1/3),
73 * [1]=supported protocol mask (mask&(1<<n)!=0 means
74 * USB_CLASS_PRINTER/1/n supported):
75 */
76#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
77/*
78 * Set protocol
79 * (arg: 1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
80 * 3=USB_CLASS_PRINTER/1/3):
81 */
82#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
83/* Set channel number (HP Vendor-specific command): */
84#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
85/* Get two-int array: [0]=bus number, [1]=device address: */
86#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
87/* Get two-int array: [0]=vendor ID, [1]=product ID: */
88#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
89/* Perform class specific soft reset */
90#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
91
92/*
93 * A DEVICE_ID string may include the printer's serial number.
94 * It should end with a semi-colon (';').
95 * An example from an HP 970C DeskJet printer is (this is one long string,
96 * with the serial number changed):
97MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ: ;
98 */
99
100/*
101 * USB Printer Requests
102 */
103
104#define USBLP_REQ_GET_ID 0x00
105#define USBLP_REQ_GET_STATUS 0x01
106#define USBLP_REQ_RESET 0x02
107#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00 /* HP Vendor-specific */
108
109#define USBLP_MINORS 16
110#define USBLP_MINOR_BASE 0
111
112#define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */
113
114#define USBLP_FIRST_PROTOCOL 1
115#define USBLP_LAST_PROTOCOL 3
116#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
117
118/*
119 * some arbitrary status buffer size;
120 * need a status buffer that is allocated via kmalloc(), not on stack
121 */
122#define STATUS_BUF_SIZE 8
123
124/*
125 * Locks down the locking order:
126 * ->wmut locks wstatus.
127 * ->mut locks the whole usblp, except [rw]complete, and thus, by indirection,
128 * [rw]status. We only touch status when we know the side idle.
129 * ->lock locks what interrupt accesses.
130 */
131struct usblp {
132 struct usb_device *dev; /* USB device */
133 struct mutex wmut;
134 struct mutex mut;
135 spinlock_t lock; /* locks rcomplete, wcomplete */
136 char *readbuf; /* read transfer_buffer */
137 char *statusbuf; /* status transfer_buffer */
138 struct usb_anchor urbs;
139 wait_queue_head_t rwait, wwait;
140 int readcount; /* Counter for reads */
141 int ifnum; /* Interface number */
142 struct usb_interface *intf; /* The interface */
143 /*
144 * Alternate-setting numbers and endpoints for each protocol
145 * (USB_CLASS_PRINTER/1/{index=1,2,3}) that the device supports:
146 */
147 struct {
148 int alt_setting;
149 struct usb_endpoint_descriptor *epwrite;
150 struct usb_endpoint_descriptor *epread;
151 } protocol[USBLP_MAX_PROTOCOLS];
152 int current_protocol;
153 int minor; /* minor number of device */
154 int wcomplete, rcomplete;
155 int wstatus; /* bytes written or error */
156 int rstatus; /* bytes ready or error */
157 unsigned int quirks; /* quirks flags */
158 unsigned int flags; /* mode flags */
159 unsigned char used; /* True if open */
160 unsigned char present; /* True if not disconnected */
161 unsigned char bidir; /* interface is bidirectional */
162 unsigned char no_paper; /* Paper Out happened */
163 unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */
164 /* first 2 bytes are (big-endian) length */
165};
166
167#ifdef DEBUG
168static void usblp_dump(struct usblp *usblp)
169{
170 struct device *dev = &usblp->intf->dev;
171 int p;
172
173 dev_dbg(dev, "usblp=0x%p\n", usblp);
174 dev_dbg(dev, "dev=0x%p\n", usblp->dev);
175 dev_dbg(dev, "present=%d\n", usblp->present);
176 dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf);
177 dev_dbg(dev, "readcount=%d\n", usblp->readcount);
178 dev_dbg(dev, "ifnum=%d\n", usblp->ifnum);
179 for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) {
180 dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p,
181 usblp->protocol[p].alt_setting);
182 dev_dbg(dev, "protocol[%d].epwrite=%p\n", p,
183 usblp->protocol[p].epwrite);
184 dev_dbg(dev, "protocol[%d].epread=%p\n", p,
185 usblp->protocol[p].epread);
186 }
187 dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol);
188 dev_dbg(dev, "minor=%d\n", usblp->minor);
189 dev_dbg(dev, "wstatus=%d\n", usblp->wstatus);
190 dev_dbg(dev, "rstatus=%d\n", usblp->rstatus);
191 dev_dbg(dev, "quirks=%d\n", usblp->quirks);
192 dev_dbg(dev, "used=%d\n", usblp->used);
193 dev_dbg(dev, "bidir=%d\n", usblp->bidir);
194 dev_dbg(dev, "device_id_string=\"%s\"\n",
195 usblp->device_id_string ?
196 usblp->device_id_string + 2 :
197 (unsigned char *)"(null)");
198}
199#endif
200
201/* Quirks: various printer quirks are handled by this table & its flags. */
202
203struct quirk_printer_struct {
204 __u16 vendorId;
205 __u16 productId;
206 unsigned int quirks;
207};
208
209#define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */
210#define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */
211#define USBLP_QUIRK_BAD_CLASS 0x4 /* descriptor uses vendor-specific Class or SubClass */
212
213static const struct quirk_printer_struct quirk_printers[] = {
214 { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */
215 { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */
216 { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */
217 { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */
218 { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */
219 { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */
220 { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
221 { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
222 { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */
223 { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */
224 { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
225 { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
226 { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
227 { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
228 { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
229 { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
230 { 0, 0 }
231};
232
233static int usblp_wwait(struct usblp *usblp, int nonblock);
234static int usblp_wtest(struct usblp *usblp, int nonblock);
235static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock);
236static int usblp_rtest(struct usblp *usblp, int nonblock);
237static int usblp_submit_read(struct usblp *usblp);
238static int usblp_select_alts(struct usblp *usblp);
239static int usblp_set_protocol(struct usblp *usblp, int protocol);
240static int usblp_cache_device_id_string(struct usblp *usblp);
241
242/* forward reference to make our lives easier */
243static struct usb_driver usblp_driver;
244static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */
245
246/*
247 * Functions for usblp control messages.
248 */
249
250static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len)
251{
252 int retval;
253 int index = usblp->ifnum;
254
255 /* High byte has the interface index.
256 Low byte has the alternate setting.
257 */
258 if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS))
259 index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
260
261 retval = usb_control_msg(usblp->dev,
262 dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
263 request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT);
264 dev_dbg(&usblp->intf->dev,
265 "usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n",
266 request, !!dir, recip, value, index, len, retval);
267 return retval < 0 ? retval : 0;
268}
269
270#define usblp_read_status(usblp, status)\
271 usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
272#define usblp_get_id(usblp, config, id, maxlen)\
273 usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
274#define usblp_reset(usblp)\
275 usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
276
277#define usblp_hp_channel_change_request(usblp, channel, buffer) \
278 usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
279
280/*
281 * See the description for usblp_select_alts() below for the usage
282 * explanation. Look into your /sys/kernel/debug/usb/devices and dmesg in
283 * case of any trouble.
284 */
285static int proto_bias = -1;
286
287/*
288 * URB callback.
289 */
290
291static void usblp_bulk_read(struct urb *urb)
292{
293 struct usblp *usblp = urb->context;
294 int status = urb->status;
295
296 if (usblp->present && usblp->used) {
297 if (status)
298 printk(KERN_WARNING "usblp%d: "
299 "nonzero read bulk status received: %d\n",
300 usblp->minor, status);
301 }
302 spin_lock(&usblp->lock);
303 if (status < 0)
304 usblp->rstatus = status;
305 else
306 usblp->rstatus = urb->actual_length;
307 usblp->rcomplete = 1;
308 wake_up(&usblp->rwait);
309 spin_unlock(&usblp->lock);
310
311 usb_free_urb(urb);
312}
313
314static void usblp_bulk_write(struct urb *urb)
315{
316 struct usblp *usblp = urb->context;
317 int status = urb->status;
318
319 if (usblp->present && usblp->used) {
320 if (status)
321 printk(KERN_WARNING "usblp%d: "
322 "nonzero write bulk status received: %d\n",
323 usblp->minor, status);
324 }
325 spin_lock(&usblp->lock);
326 if (status < 0)
327 usblp->wstatus = status;
328 else
329 usblp->wstatus = urb->actual_length;
330 usblp->no_paper = 0;
331 usblp->wcomplete = 1;
332 wake_up(&usblp->wwait);
333 spin_unlock(&usblp->lock);
334
335 usb_free_urb(urb);
336}
337
338/*
339 * Get and print printer errors.
340 */
341
342static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" };
343
344static int usblp_check_status(struct usblp *usblp, int err)
345{
346 unsigned char status, newerr = 0;
347 int error;
348
349 mutex_lock(&usblp->mut);
350 if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
351 mutex_unlock(&usblp->mut);
352 printk_ratelimited(KERN_ERR
353 "usblp%d: error %d reading printer status\n",
354 usblp->minor, error);
355 return 0;
356 }
357 status = *usblp->statusbuf;
358 mutex_unlock(&usblp->mut);
359
360 if (~status & LP_PERRORP)
361 newerr = 3;
362 if (status & LP_POUTPA)
363 newerr = 1;
364 if (~status & LP_PSELECD)
365 newerr = 2;
366
367 if (newerr != err) {
368 printk(KERN_INFO "usblp%d: %s\n",
369 usblp->minor, usblp_messages[newerr]);
370 }
371
372 return newerr;
373}
374
375static int handle_bidir(struct usblp *usblp)
376{
377 if (usblp->bidir && usblp->used) {
378 if (usblp_submit_read(usblp) < 0)
379 return -EIO;
380 }
381 return 0;
382}
383
384/*
385 * File op functions.
386 */
387
388static int usblp_open(struct inode *inode, struct file *file)
389{
390 int minor = iminor(inode);
391 struct usblp *usblp;
392 struct usb_interface *intf;
393 int retval;
394
395 if (minor < 0)
396 return -ENODEV;
397
398 mutex_lock(&usblp_mutex);
399
400 retval = -ENODEV;
401 intf = usb_find_interface(&usblp_driver, minor);
402 if (!intf)
403 goto out;
404 usblp = usb_get_intfdata(intf);
405 if (!usblp || !usblp->dev || !usblp->present)
406 goto out;
407
408 retval = -EBUSY;
409 if (usblp->used)
410 goto out;
411
412 /*
413 * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons:
414 * - We do not want persistent state which close(2) does not clear
415 * - It is not used anyway, according to CUPS people
416 */
417
418 retval = usb_autopm_get_interface(intf);
419 if (retval < 0)
420 goto out;
421 usblp->used = 1;
422 file->private_data = usblp;
423
424 usblp->wcomplete = 1; /* we begin writeable */
425 usblp->wstatus = 0;
426 usblp->rcomplete = 0;
427
428 if (handle_bidir(usblp) < 0) {
429 usb_autopm_put_interface(intf);
430 usblp->used = 0;
431 file->private_data = NULL;
432 retval = -EIO;
433 }
434out:
435 mutex_unlock(&usblp_mutex);
436 return retval;
437}
438
439static void usblp_cleanup(struct usblp *usblp)
440{
441 printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
442
443 kfree(usblp->readbuf);
444 kfree(usblp->device_id_string);
445 kfree(usblp->statusbuf);
446 kfree(usblp);
447}
448
449static void usblp_unlink_urbs(struct usblp *usblp)
450{
451 usb_kill_anchored_urbs(&usblp->urbs);
452}
453
454static int usblp_release(struct inode *inode, struct file *file)
455{
456 struct usblp *usblp = file->private_data;
457
458 usblp->flags &= ~LP_ABORT;
459
460 mutex_lock(&usblp_mutex);
461 usblp->used = 0;
462 if (usblp->present) {
463 usblp_unlink_urbs(usblp);
464 usb_autopm_put_interface(usblp->intf);
465 } else /* finish cleanup from disconnect */
466 usblp_cleanup(usblp);
467 mutex_unlock(&usblp_mutex);
468 return 0;
469}
470
471/* No kernel lock - fine */
472static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait)
473{
474 __poll_t ret;
475 unsigned long flags;
476
477 struct usblp *usblp = file->private_data;
478 /* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */
479 poll_wait(file, &usblp->rwait, wait);
480 poll_wait(file, &usblp->wwait, wait);
481 spin_lock_irqsave(&usblp->lock, flags);
482 ret = ((usblp->bidir && usblp->rcomplete) ? EPOLLIN | EPOLLRDNORM : 0) |
483 ((usblp->no_paper || usblp->wcomplete) ? EPOLLOUT | EPOLLWRNORM : 0);
484 spin_unlock_irqrestore(&usblp->lock, flags);
485 return ret;
486}
487
488static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
489{
490 struct usblp *usblp = file->private_data;
491 int length, err, i;
492 unsigned char newChannel;
493 int status;
494 int twoints[2];
495 int retval = 0;
496
497 mutex_lock(&usblp->mut);
498 if (!usblp->present) {
499 retval = -ENODEV;
500 goto done;
501 }
502
503 dev_dbg(&usblp->intf->dev,
504 "usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd,
505 _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
506
507 if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */
508
509 switch (_IOC_NR(cmd)) {
510
511 case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
512 if (_IOC_DIR(cmd) != _IOC_READ) {
513 retval = -EINVAL;
514 goto done;
515 }
516
517 length = usblp_cache_device_id_string(usblp);
518 if (length < 0) {
519 retval = length;
520 goto done;
521 }
522 if (length > _IOC_SIZE(cmd))
523 length = _IOC_SIZE(cmd); /* truncate */
524
525 if (copy_to_user((void __user *) arg,
526 usblp->device_id_string,
527 (unsigned long) length)) {
528 retval = -EFAULT;
529 goto done;
530 }
531
532 break;
533
534 case IOCNR_GET_PROTOCOLS:
535 if (_IOC_DIR(cmd) != _IOC_READ ||
536 _IOC_SIZE(cmd) < sizeof(twoints)) {
537 retval = -EINVAL;
538 goto done;
539 }
540
541 twoints[0] = usblp->current_protocol;
542 twoints[1] = 0;
543 for (i = USBLP_FIRST_PROTOCOL;
544 i <= USBLP_LAST_PROTOCOL; i++) {
545 if (usblp->protocol[i].alt_setting >= 0)
546 twoints[1] |= (1<<i);
547 }
548
549 if (copy_to_user((void __user *)arg,
550 (unsigned char *)twoints,
551 sizeof(twoints))) {
552 retval = -EFAULT;
553 goto done;
554 }
555
556 break;
557
558 case IOCNR_SET_PROTOCOL:
559 if (_IOC_DIR(cmd) != _IOC_WRITE) {
560 retval = -EINVAL;
561 goto done;
562 }
563
564#ifdef DEBUG
565 if (arg == -10) {
566 usblp_dump(usblp);
567 break;
568 }
569#endif
570
571 usblp_unlink_urbs(usblp);
572 retval = usblp_set_protocol(usblp, arg);
573 if (retval < 0) {
574 usblp_set_protocol(usblp,
575 usblp->current_protocol);
576 }
577 break;
578
579 case IOCNR_HP_SET_CHANNEL:
580 if (_IOC_DIR(cmd) != _IOC_WRITE ||
581 le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
582 usblp->quirks & USBLP_QUIRK_BIDIR) {
583 retval = -EINVAL;
584 goto done;
585 }
586
587 err = usblp_hp_channel_change_request(usblp,
588 arg, &newChannel);
589 if (err < 0) {
590 dev_err(&usblp->dev->dev,
591 "usblp%d: error = %d setting "
592 "HP channel\n",
593 usblp->minor, err);
594 retval = -EIO;
595 goto done;
596 }
597
598 dev_dbg(&usblp->intf->dev,
599 "usblp%d requested/got HP channel %ld/%d\n",
600 usblp->minor, arg, newChannel);
601 break;
602
603 case IOCNR_GET_BUS_ADDRESS:
604 if (_IOC_DIR(cmd) != _IOC_READ ||
605 _IOC_SIZE(cmd) < sizeof(twoints)) {
606 retval = -EINVAL;
607 goto done;
608 }
609
610 twoints[0] = usblp->dev->bus->busnum;
611 twoints[1] = usblp->dev->devnum;
612 if (copy_to_user((void __user *)arg,
613 (unsigned char *)twoints,
614 sizeof(twoints))) {
615 retval = -EFAULT;
616 goto done;
617 }
618
619 dev_dbg(&usblp->intf->dev,
620 "usblp%d is bus=%d, device=%d\n",
621 usblp->minor, twoints[0], twoints[1]);
622 break;
623
624 case IOCNR_GET_VID_PID:
625 if (_IOC_DIR(cmd) != _IOC_READ ||
626 _IOC_SIZE(cmd) < sizeof(twoints)) {
627 retval = -EINVAL;
628 goto done;
629 }
630
631 twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
632 twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
633 if (copy_to_user((void __user *)arg,
634 (unsigned char *)twoints,
635 sizeof(twoints))) {
636 retval = -EFAULT;
637 goto done;
638 }
639
640 dev_dbg(&usblp->intf->dev,
641 "usblp%d is VID=0x%4.4X, PID=0x%4.4X\n",
642 usblp->minor, twoints[0], twoints[1]);
643 break;
644
645 case IOCNR_SOFT_RESET:
646 if (_IOC_DIR(cmd) != _IOC_NONE) {
647 retval = -EINVAL;
648 goto done;
649 }
650 retval = usblp_reset(usblp);
651 break;
652 default:
653 retval = -ENOTTY;
654 }
655 else /* old-style ioctl value */
656 switch (cmd) {
657
658 case LPGETSTATUS:
659 retval = usblp_read_status(usblp, usblp->statusbuf);
660 if (retval) {
661 printk_ratelimited(KERN_ERR "usblp%d:"
662 "failed reading printer status (%d)\n",
663 usblp->minor, retval);
664 retval = -EIO;
665 goto done;
666 }
667 status = *usblp->statusbuf;
668 if (copy_to_user((void __user *)arg, &status, sizeof(int)))
669 retval = -EFAULT;
670 break;
671
672 case LPABORT:
673 if (arg)
674 usblp->flags |= LP_ABORT;
675 else
676 usblp->flags &= ~LP_ABORT;
677 break;
678
679 default:
680 retval = -ENOTTY;
681 }
682
683done:
684 mutex_unlock(&usblp->mut);
685 return retval;
686}
687
688static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length)
689{
690 struct urb *urb;
691 char *writebuf;
692
693 writebuf = kmalloc(transfer_length, GFP_KERNEL);
694 if (writebuf == NULL)
695 return NULL;
696 urb = usb_alloc_urb(0, GFP_KERNEL);
697 if (urb == NULL) {
698 kfree(writebuf);
699 return NULL;
700 }
701
702 usb_fill_bulk_urb(urb, usblp->dev,
703 usb_sndbulkpipe(usblp->dev,
704 usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
705 writebuf, transfer_length, usblp_bulk_write, usblp);
706 urb->transfer_flags |= URB_FREE_BUFFER;
707
708 return urb;
709}
710
711static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
712{
713 struct usblp *usblp = file->private_data;
714 struct urb *writeurb;
715 int rv;
716 int transfer_length;
717 ssize_t writecount = 0;
718
719 if (mutex_lock_interruptible(&usblp->wmut)) {
720 rv = -EINTR;
721 goto raise_biglock;
722 }
723 if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0)
724 goto raise_wait;
725
726 while (writecount < count) {
727 /*
728 * Step 1: Submit next block.
729 */
730 if ((transfer_length = count - writecount) > USBLP_BUF_SIZE)
731 transfer_length = USBLP_BUF_SIZE;
732
733 rv = -ENOMEM;
734 writeurb = usblp_new_writeurb(usblp, transfer_length);
735 if (writeurb == NULL)
736 goto raise_urb;
737 usb_anchor_urb(writeurb, &usblp->urbs);
738
739 if (copy_from_user(writeurb->transfer_buffer,
740 buffer + writecount, transfer_length)) {
741 rv = -EFAULT;
742 goto raise_badaddr;
743 }
744
745 spin_lock_irq(&usblp->lock);
746 usblp->wcomplete = 0;
747 spin_unlock_irq(&usblp->lock);
748 if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) {
749 usblp->wstatus = 0;
750 spin_lock_irq(&usblp->lock);
751 usblp->no_paper = 0;
752 usblp->wcomplete = 1;
753 wake_up(&usblp->wwait);
754 spin_unlock_irq(&usblp->lock);
755 if (rv != -ENOMEM)
756 rv = -EIO;
757 goto raise_submit;
758 }
759
760 /*
761 * Step 2: Wait for transfer to end, collect results.
762 */
763 rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK));
764 if (rv < 0) {
765 if (rv == -EAGAIN) {
766 /* Presume that it's going to complete well. */
767 writecount += transfer_length;
768 }
769 if (rv == -ENOSPC) {
770 spin_lock_irq(&usblp->lock);
771 usblp->no_paper = 1; /* Mark for poll(2) */
772 spin_unlock_irq(&usblp->lock);
773 writecount += transfer_length;
774 }
775 /* Leave URB dangling, to be cleaned on close. */
776 goto collect_error;
777 }
778
779 if (usblp->wstatus < 0) {
780 rv = -EIO;
781 goto collect_error;
782 }
783 /*
784 * This is critical: it must be our URB, not other writer's.
785 * The wmut exists mainly to cover us here.
786 */
787 writecount += usblp->wstatus;
788 }
789
790 mutex_unlock(&usblp->wmut);
791 return writecount;
792
793raise_submit:
794raise_badaddr:
795 usb_unanchor_urb(writeurb);
796 usb_free_urb(writeurb);
797raise_urb:
798raise_wait:
799collect_error: /* Out of raise sequence */
800 mutex_unlock(&usblp->wmut);
801raise_biglock:
802 return writecount ? writecount : rv;
803}
804
805/*
806 * Notice that we fail to restart in a few cases: on EFAULT, on restart
807 * error, etc. This is the historical behaviour. In all such cases we return
808 * EIO, and applications loop in order to get the new read going.
809 */
810static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos)
811{
812 struct usblp *usblp = file->private_data;
813 ssize_t count;
814 ssize_t avail;
815 int rv;
816
817 if (!usblp->bidir)
818 return -EINVAL;
819
820 rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK));
821 if (rv < 0)
822 return rv;
823
824 if ((avail = usblp->rstatus) < 0) {
825 printk(KERN_ERR "usblp%d: error %d reading from printer\n",
826 usblp->minor, (int)avail);
827 usblp_submit_read(usblp);
828 count = -EIO;
829 goto done;
830 }
831
832 count = len < avail - usblp->readcount ? len : avail - usblp->readcount;
833 if (count != 0 &&
834 copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) {
835 count = -EFAULT;
836 goto done;
837 }
838
839 if ((usblp->readcount += count) == avail) {
840 if (usblp_submit_read(usblp) < 0) {
841 /* We don't want to leak USB return codes into errno. */
842 if (count == 0)
843 count = -EIO;
844 goto done;
845 }
846 }
847
848done:
849 mutex_unlock(&usblp->mut);
850 return count;
851}
852
853/*
854 * Wait for the write path to come idle.
855 * This is called under the ->wmut, so the idle path stays idle.
856 *
857 * Our write path has a peculiar property: it does not buffer like a tty,
858 * but waits for the write to succeed. This allows our ->release to bug out
859 * without waiting for writes to drain. But it obviously does not work
860 * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use
861 * select(2) or poll(2) to wait for the buffer to drain before closing.
862 * Alternatively, set blocking mode with fcntl and issue a zero-size write.
863 */
864static int usblp_wwait(struct usblp *usblp, int nonblock)
865{
866 DECLARE_WAITQUEUE(waita, current);
867 int rc;
868 int err = 0;
869
870 add_wait_queue(&usblp->wwait, &waita);
871 for (;;) {
872 if (mutex_lock_interruptible(&usblp->mut)) {
873 rc = -EINTR;
874 break;
875 }
876 set_current_state(TASK_INTERRUPTIBLE);
877 rc = usblp_wtest(usblp, nonblock);
878 mutex_unlock(&usblp->mut);
879 if (rc <= 0)
880 break;
881
882 if (schedule_timeout(msecs_to_jiffies(1500)) == 0) {
883 if (usblp->flags & LP_ABORT) {
884 err = usblp_check_status(usblp, err);
885 if (err == 1) { /* Paper out */
886 rc = -ENOSPC;
887 break;
888 }
889 } else {
890 /* Prod the printer, Gentoo#251237. */
891 mutex_lock(&usblp->mut);
892 usblp_read_status(usblp, usblp->statusbuf);
893 mutex_unlock(&usblp->mut);
894 }
895 }
896 }
897 set_current_state(TASK_RUNNING);
898 remove_wait_queue(&usblp->wwait, &waita);
899 return rc;
900}
901
902static int usblp_wtest(struct usblp *usblp, int nonblock)
903{
904 unsigned long flags;
905
906 if (!usblp->present)
907 return -ENODEV;
908 if (signal_pending(current))
909 return -EINTR;
910 spin_lock_irqsave(&usblp->lock, flags);
911 if (usblp->wcomplete) {
912 spin_unlock_irqrestore(&usblp->lock, flags);
913 return 0;
914 }
915 spin_unlock_irqrestore(&usblp->lock, flags);
916 if (nonblock)
917 return -EAGAIN;
918 return 1;
919}
920
921/*
922 * Wait for read bytes to become available. This probably should have been
923 * called usblp_r_lock_and_wait(), because we lock first. But it's a traditional
924 * name for functions which lock and return.
925 *
926 * We do not use wait_event_interruptible because it makes locking iffy.
927 */
928static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock)
929{
930 DECLARE_WAITQUEUE(waita, current);
931 int rc;
932
933 add_wait_queue(&usblp->rwait, &waita);
934 for (;;) {
935 if (mutex_lock_interruptible(&usblp->mut)) {
936 rc = -EINTR;
937 break;
938 }
939 set_current_state(TASK_INTERRUPTIBLE);
940 if ((rc = usblp_rtest(usblp, nonblock)) < 0) {
941 mutex_unlock(&usblp->mut);
942 break;
943 }
944 if (rc == 0) /* Keep it locked */
945 break;
946 mutex_unlock(&usblp->mut);
947 schedule();
948 }
949 set_current_state(TASK_RUNNING);
950 remove_wait_queue(&usblp->rwait, &waita);
951 return rc;
952}
953
954static int usblp_rtest(struct usblp *usblp, int nonblock)
955{
956 unsigned long flags;
957
958 if (!usblp->present)
959 return -ENODEV;
960 if (signal_pending(current))
961 return -EINTR;
962 spin_lock_irqsave(&usblp->lock, flags);
963 if (usblp->rcomplete) {
964 spin_unlock_irqrestore(&usblp->lock, flags);
965 return 0;
966 }
967 spin_unlock_irqrestore(&usblp->lock, flags);
968 if (nonblock)
969 return -EAGAIN;
970 return 1;
971}
972
973/*
974 * Please check ->bidir and other such things outside for now.
975 */
976static int usblp_submit_read(struct usblp *usblp)
977{
978 struct urb *urb;
979 unsigned long flags;
980 int rc;
981
982 rc = -ENOMEM;
983 urb = usb_alloc_urb(0, GFP_KERNEL);
984 if (urb == NULL)
985 goto raise_urb;
986
987 usb_fill_bulk_urb(urb, usblp->dev,
988 usb_rcvbulkpipe(usblp->dev,
989 usblp->protocol[usblp->current_protocol].epread->bEndpointAddress),
990 usblp->readbuf, USBLP_BUF_SIZE_IN,
991 usblp_bulk_read, usblp);
992 usb_anchor_urb(urb, &usblp->urbs);
993
994 spin_lock_irqsave(&usblp->lock, flags);
995 usblp->readcount = 0; /* XXX Why here? */
996 usblp->rcomplete = 0;
997 spin_unlock_irqrestore(&usblp->lock, flags);
998 if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) {
999 dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc);
1000 spin_lock_irqsave(&usblp->lock, flags);
1001 usblp->rstatus = rc;
1002 usblp->rcomplete = 1;
1003 spin_unlock_irqrestore(&usblp->lock, flags);
1004 goto raise_submit;
1005 }
1006
1007 return 0;
1008
1009raise_submit:
1010 usb_unanchor_urb(urb);
1011 usb_free_urb(urb);
1012raise_urb:
1013 return rc;
1014}
1015
1016/*
1017 * Checks for printers that have quirks, such as requiring unidirectional
1018 * communication but reporting bidirectional; currently some HP printers
1019 * have this flaw (HP 810, 880, 895, etc.), or needing an init string
1020 * sent at each open (like some Epsons).
1021 * Returns 1 if found, 0 if not found.
1022 *
1023 * HP recommended that we use the bidirectional interface but
1024 * don't attempt any bulk IN transfers from the IN endpoint.
1025 * Here's some more detail on the problem:
1026 * The problem is not that it isn't bidirectional though. The problem
1027 * is that if you request a device ID, or status information, while
1028 * the buffers are full, the return data will end up in the print data
1029 * buffer. For example if you make sure you never request the device ID
1030 * while you are sending print data, and you don't try to query the
1031 * printer status every couple of milliseconds, you will probably be OK.
1032 */
1033static unsigned int usblp_quirks(__u16 vendor, __u16 product)
1034{
1035 int i;
1036
1037 for (i = 0; quirk_printers[i].vendorId; i++) {
1038 if (vendor == quirk_printers[i].vendorId &&
1039 product == quirk_printers[i].productId)
1040 return quirk_printers[i].quirks;
1041 }
1042 return 0;
1043}
1044
1045static const struct file_operations usblp_fops = {
1046 .owner = THIS_MODULE,
1047 .read = usblp_read,
1048 .write = usblp_write,
1049 .poll = usblp_poll,
1050 .unlocked_ioctl = usblp_ioctl,
1051 .compat_ioctl = usblp_ioctl,
1052 .open = usblp_open,
1053 .release = usblp_release,
1054 .llseek = noop_llseek,
1055};
1056
1057static char *usblp_devnode(struct device *dev, umode_t *mode)
1058{
1059 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
1060}
1061
1062static struct usb_class_driver usblp_class = {
1063 .name = "lp%d",
1064 .devnode = usblp_devnode,
1065 .fops = &usblp_fops,
1066 .minor_base = USBLP_MINOR_BASE,
1067};
1068
1069static ssize_t ieee1284_id_show(struct device *dev, struct device_attribute *attr, char *buf)
1070{
1071 struct usb_interface *intf = to_usb_interface(dev);
1072 struct usblp *usblp = usb_get_intfdata(intf);
1073
1074 if (usblp->device_id_string[0] == 0 &&
1075 usblp->device_id_string[1] == 0)
1076 return 0;
1077
1078 return sprintf(buf, "%s", usblp->device_id_string+2);
1079}
1080
1081static DEVICE_ATTR_RO(ieee1284_id);
1082
1083static int usblp_probe(struct usb_interface *intf,
1084 const struct usb_device_id *id)
1085{
1086 struct usb_device *dev = interface_to_usbdev(intf);
1087 struct usblp *usblp;
1088 int protocol;
1089 int retval;
1090
1091 /* Malloc and start initializing usblp structure so we can use it
1092 * directly. */
1093 usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL);
1094 if (!usblp) {
1095 retval = -ENOMEM;
1096 goto abort_ret;
1097 }
1098 usblp->dev = dev;
1099 mutex_init(&usblp->wmut);
1100 mutex_init(&usblp->mut);
1101 spin_lock_init(&usblp->lock);
1102 init_waitqueue_head(&usblp->rwait);
1103 init_waitqueue_head(&usblp->wwait);
1104 init_usb_anchor(&usblp->urbs);
1105 usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
1106 usblp->intf = intf;
1107
1108 /* Malloc device ID string buffer to the largest expected length,
1109 * since we can re-query it on an ioctl and a dynamic string
1110 * could change in length. */
1111 if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
1112 retval = -ENOMEM;
1113 goto abort;
1114 }
1115
1116 /*
1117 * Allocate read buffer. We somewhat wastefully
1118 * malloc both regardless of bidirectionality, because the
1119 * alternate setting can be changed later via an ioctl.
1120 */
1121 if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) {
1122 retval = -ENOMEM;
1123 goto abort;
1124 }
1125
1126 /* Allocate buffer for printer status */
1127 usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL);
1128 if (!usblp->statusbuf) {
1129 retval = -ENOMEM;
1130 goto abort;
1131 }
1132
1133 /* Lookup quirks for this printer. */
1134 usblp->quirks = usblp_quirks(
1135 le16_to_cpu(dev->descriptor.idVendor),
1136 le16_to_cpu(dev->descriptor.idProduct));
1137
1138 /* Analyze and pick initial alternate settings and endpoints. */
1139 protocol = usblp_select_alts(usblp);
1140 if (protocol < 0) {
1141 dev_dbg(&intf->dev,
1142 "incompatible printer-class device 0x%4.4X/0x%4.4X\n",
1143 le16_to_cpu(dev->descriptor.idVendor),
1144 le16_to_cpu(dev->descriptor.idProduct));
1145 retval = -ENODEV;
1146 goto abort;
1147 }
1148
1149 /* Setup the selected alternate setting and endpoints. */
1150 if (usblp_set_protocol(usblp, protocol) < 0) {
1151 retval = -ENODEV; /* ->probe isn't ->ioctl */
1152 goto abort;
1153 }
1154
1155 /* Retrieve and store the device ID string. */
1156 usblp_cache_device_id_string(usblp);
1157 retval = device_create_file(&intf->dev, &dev_attr_ieee1284_id);
1158 if (retval)
1159 goto abort_intfdata;
1160
1161#ifdef DEBUG
1162 usblp_check_status(usblp, 0);
1163#endif
1164
1165 usb_set_intfdata(intf, usblp);
1166
1167 usblp->present = 1;
1168
1169 retval = usb_register_dev(intf, &usblp_class);
1170 if (retval) {
1171 dev_err(&intf->dev,
1172 "usblp: Not able to get a minor (base %u, slice default): %d\n",
1173 USBLP_MINOR_BASE, retval);
1174 goto abort_intfdata;
1175 }
1176 usblp->minor = intf->minor;
1177 dev_info(&intf->dev,
1178 "usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n",
1179 usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
1180 usblp->ifnum,
1181 usblp->protocol[usblp->current_protocol].alt_setting,
1182 usblp->current_protocol,
1183 le16_to_cpu(usblp->dev->descriptor.idVendor),
1184 le16_to_cpu(usblp->dev->descriptor.idProduct));
1185
1186 return 0;
1187
1188abort_intfdata:
1189 usb_set_intfdata(intf, NULL);
1190 device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
1191abort:
1192 kfree(usblp->readbuf);
1193 kfree(usblp->statusbuf);
1194 kfree(usblp->device_id_string);
1195 kfree(usblp);
1196abort_ret:
1197 return retval;
1198}
1199
1200/*
1201 * We are a "new" style driver with usb_device_id table,
1202 * but our requirements are too intricate for simple match to handle.
1203 *
1204 * The "proto_bias" option may be used to specify the preferred protocol
1205 * for all USB printers (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
1206 * 3=USB_CLASS_PRINTER/1/3). If the device supports the preferred protocol,
1207 * then we bind to it.
1208 *
1209 * The best interface for us is USB_CLASS_PRINTER/1/2, because it
1210 * is compatible with a stream of characters. If we find it, we bind to it.
1211 *
1212 * Note that the people from hpoj.sourceforge.net need to be able to
1213 * bind to USB_CLASS_PRINTER/1/3 (MLC/1284.4), so we provide them ioctls
1214 * for this purpose.
1215 *
1216 * Failing USB_CLASS_PRINTER/1/2, we look for USB_CLASS_PRINTER/1/3,
1217 * even though it's probably not stream-compatible, because this matches
1218 * the behaviour of the old code.
1219 *
1220 * If nothing else, we bind to USB_CLASS_PRINTER/1/1
1221 * - the unidirectional interface.
1222 */
1223static int usblp_select_alts(struct usblp *usblp)
1224{
1225 struct usb_interface *if_alt;
1226 struct usb_host_interface *ifd;
1227 struct usb_endpoint_descriptor *epwrite, *epread;
1228 int p, i;
1229 int res;
1230
1231 if_alt = usblp->intf;
1232
1233 for (p = 0; p < USBLP_MAX_PROTOCOLS; p++)
1234 usblp->protocol[p].alt_setting = -1;
1235
1236 /* Find out what we have. */
1237 for (i = 0; i < if_alt->num_altsetting; i++) {
1238 ifd = &if_alt->altsetting[i];
1239
1240 if (ifd->desc.bInterfaceClass != USB_CLASS_PRINTER ||
1241 ifd->desc.bInterfaceSubClass != 1)
1242 if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS))
1243 continue;
1244
1245 if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL ||
1246 ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL)
1247 continue;
1248
1249 /* Look for the expected bulk endpoints. */
1250 if (ifd->desc.bInterfaceProtocol > 1) {
1251 res = usb_find_common_endpoints(ifd,
1252 &epread, &epwrite, NULL, NULL);
1253 } else {
1254 epread = NULL;
1255 res = usb_find_bulk_out_endpoint(ifd, &epwrite);
1256 }
1257
1258 /* Ignore buggy hardware without the right endpoints. */
1259 if (res)
1260 continue;
1261
1262 /* Turn off reads for buggy bidirectional printers. */
1263 if (usblp->quirks & USBLP_QUIRK_BIDIR) {
1264 printk(KERN_INFO "usblp%d: Disabling reads from "
1265 "problematic bidirectional printer\n",
1266 usblp->minor);
1267 epread = NULL;
1268 }
1269
1270 usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting =
1271 ifd->desc.bAlternateSetting;
1272 usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite;
1273 usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread;
1274 }
1275
1276 /* If our requested protocol is supported, then use it. */
1277 if (proto_bias >= USBLP_FIRST_PROTOCOL &&
1278 proto_bias <= USBLP_LAST_PROTOCOL &&
1279 usblp->protocol[proto_bias].alt_setting != -1)
1280 return proto_bias;
1281
1282 /* Ordering is important here. */
1283 if (usblp->protocol[2].alt_setting != -1)
1284 return 2;
1285 if (usblp->protocol[1].alt_setting != -1)
1286 return 1;
1287 if (usblp->protocol[3].alt_setting != -1)
1288 return 3;
1289
1290 /* If nothing is available, then don't bind to this device. */
1291 return -1;
1292}
1293
1294static int usblp_set_protocol(struct usblp *usblp, int protocol)
1295{
1296 int r, alts;
1297
1298 if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL)
1299 return -EINVAL;
1300
1301 alts = usblp->protocol[protocol].alt_setting;
1302 if (alts < 0)
1303 return -EINVAL;
1304 r = usb_set_interface(usblp->dev, usblp->ifnum, alts);
1305 if (r < 0) {
1306 printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n",
1307 alts, usblp->ifnum);
1308 return r;
1309 }
1310
1311 usblp->bidir = (usblp->protocol[protocol].epread != NULL);
1312 usblp->current_protocol = protocol;
1313 dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n",
1314 usblp->minor, protocol);
1315 return 0;
1316}
1317
1318/* Retrieves and caches device ID string.
1319 * Returns length, including length bytes but not null terminator.
1320 * On error, returns a negative errno value. */
1321static int usblp_cache_device_id_string(struct usblp *usblp)
1322{
1323 int err, length;
1324
1325 err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1);
1326 if (err < 0) {
1327 dev_dbg(&usblp->intf->dev,
1328 "usblp%d: error = %d reading IEEE-1284 Device ID string\n",
1329 usblp->minor, err);
1330 usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
1331 return -EIO;
1332 }
1333
1334 /* First two bytes are length in big-endian.
1335 * They count themselves, and we copy them into
1336 * the user's buffer. */
1337 length = be16_to_cpu(*((__be16 *)usblp->device_id_string));
1338 if (length < 2)
1339 length = 2;
1340 else if (length >= USBLP_DEVICE_ID_SIZE)
1341 length = USBLP_DEVICE_ID_SIZE - 1;
1342 usblp->device_id_string[length] = '\0';
1343
1344 dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n",
1345 usblp->minor, length, &usblp->device_id_string[2]);
1346
1347 return length;
1348}
1349
1350static void usblp_disconnect(struct usb_interface *intf)
1351{
1352 struct usblp *usblp = usb_get_intfdata(intf);
1353
1354 usb_deregister_dev(intf, &usblp_class);
1355
1356 if (!usblp || !usblp->dev) {
1357 dev_err(&intf->dev, "bogus disconnect\n");
1358 BUG();
1359 }
1360
1361 device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
1362
1363 mutex_lock(&usblp_mutex);
1364 mutex_lock(&usblp->mut);
1365 usblp->present = 0;
1366 wake_up(&usblp->wwait);
1367 wake_up(&usblp->rwait);
1368 usb_set_intfdata(intf, NULL);
1369
1370 usblp_unlink_urbs(usblp);
1371 mutex_unlock(&usblp->mut);
1372
1373 if (!usblp->used)
1374 usblp_cleanup(usblp);
1375 mutex_unlock(&usblp_mutex);
1376}
1377
1378static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
1379{
1380 struct usblp *usblp = usb_get_intfdata(intf);
1381
1382 usblp_unlink_urbs(usblp);
1383#if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
1384 /* not strictly necessary, but just in case */
1385 wake_up(&usblp->wwait);
1386 wake_up(&usblp->rwait);
1387#endif
1388
1389 return 0;
1390}
1391
1392static int usblp_resume(struct usb_interface *intf)
1393{
1394 struct usblp *usblp = usb_get_intfdata(intf);
1395 int r;
1396
1397 r = handle_bidir(usblp);
1398
1399 return r;
1400}
1401
1402static const struct usb_device_id usblp_ids[] = {
1403 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 1) },
1404 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 2) },
1405 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 3) },
1406 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 1) },
1407 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 2) },
1408 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 3) },
1409 { USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */
1410 { } /* Terminating entry */
1411};
1412
1413MODULE_DEVICE_TABLE(usb, usblp_ids);
1414
1415static struct usb_driver usblp_driver = {
1416 .name = "usblp",
1417 .probe = usblp_probe,
1418 .disconnect = usblp_disconnect,
1419 .suspend = usblp_suspend,
1420 .resume = usblp_resume,
1421 .id_table = usblp_ids,
1422 .supports_autosuspend = 1,
1423};
1424
1425module_usb_driver(usblp_driver);
1426
1427MODULE_AUTHOR(DRIVER_AUTHOR);
1428MODULE_DESCRIPTION(DRIVER_DESC);
1429module_param(proto_bias, int, S_IRUGO | S_IWUSR);
1430MODULE_PARM_DESC(proto_bias, "Favourite protocol number");
1431MODULE_LICENSE("GPL");
1/*
2 * usblp.c
3 *
4 * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com>
5 * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz>
6 * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net>
7 * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
8 # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
9 # Copyright (c) 2001 David Paschal <paschal@rcsis.com>
10 * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name>
11 *
12 * USB Printer Device Class driver for USB printers and printer cables
13 *
14 * Sponsored by SuSE
15 *
16 * ChangeLog:
17 * v0.1 - thorough cleaning, URBification, almost a rewrite
18 * v0.2 - some more cleanups
19 * v0.3 - cleaner again, waitqueue fixes
20 * v0.4 - fixes in unidirectional mode
21 * v0.5 - add DEVICE_ID string support
22 * v0.6 - never time out
23 * v0.7 - fixed bulk-IN read and poll (David Paschal)
24 * v0.8 - add devfs support
25 * v0.9 - fix unplug-while-open paths
26 * v0.10- remove sleep_on, fix error on oom (oliver@neukum.org)
27 * v0.11 - add proto_bias option (Pete Zaitcev)
28 * v0.12 - add hpoj.sourceforge.net ioctls (David Paschal)
29 * v0.13 - alloc space for statusbuf (<status> not on stack);
30 * use usb_alloc_coherent() for read buf & write buf;
31 * none - Maintained in Linux kernel after v0.13
32 */
33
34/*
35 * This program is free software; you can redistribute it and/or modify
36 * it under the terms of the GNU General Public License as published by
37 * the Free Software Foundation; either version 2 of the License, or
38 * (at your option) any later version.
39 *
40 * This program is distributed in the hope that it will be useful,
41 * but WITHOUT ANY WARRANTY; without even the implied warranty of
42 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
43 * GNU General Public License for more details.
44 *
45 * You should have received a copy of the GNU General Public License
46 * along with this program; if not, write to the Free Software
47 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
48 */
49
50#include <linux/module.h>
51#include <linux/kernel.h>
52#include <linux/sched.h>
53#include <linux/signal.h>
54#include <linux/poll.h>
55#include <linux/slab.h>
56#include <linux/lp.h>
57#include <linux/mutex.h>
58#undef DEBUG
59#include <linux/usb.h>
60#include <linux/ratelimit.h>
61
62/*
63 * Version Information
64 */
65#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
66#define DRIVER_DESC "USB Printer Device Class driver"
67
68#define USBLP_BUF_SIZE 8192
69#define USBLP_BUF_SIZE_IN 1024
70#define USBLP_DEVICE_ID_SIZE 1024
71
72/* ioctls: */
73#define IOCNR_GET_DEVICE_ID 1
74#define IOCNR_GET_PROTOCOLS 2
75#define IOCNR_SET_PROTOCOL 3
76#define IOCNR_HP_SET_CHANNEL 4
77#define IOCNR_GET_BUS_ADDRESS 5
78#define IOCNR_GET_VID_PID 6
79#define IOCNR_SOFT_RESET 7
80/* Get device_id string: */
81#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
82/* The following ioctls were added for http://hpoj.sourceforge.net: */
83/* Get two-int array:
84 * [0]=current protocol (1=7/1/1, 2=7/1/2, 3=7/1/3),
85 * [1]=supported protocol mask (mask&(1<<n)!=0 means 7/1/n supported): */
86#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
87/* Set protocol (arg: 1=7/1/1, 2=7/1/2, 3=7/1/3): */
88#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
89/* Set channel number (HP Vendor-specific command): */
90#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
91/* Get two-int array: [0]=bus number, [1]=device address: */
92#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
93/* Get two-int array: [0]=vendor ID, [1]=product ID: */
94#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
95/* Perform class specific soft reset */
96#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
97
98/*
99 * A DEVICE_ID string may include the printer's serial number.
100 * It should end with a semi-colon (';').
101 * An example from an HP 970C DeskJet printer is (this is one long string,
102 * with the serial number changed):
103MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ: ;
104 */
105
106/*
107 * USB Printer Requests
108 */
109
110#define USBLP_REQ_GET_ID 0x00
111#define USBLP_REQ_GET_STATUS 0x01
112#define USBLP_REQ_RESET 0x02
113#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00 /* HP Vendor-specific */
114
115#define USBLP_MINORS 16
116#define USBLP_MINOR_BASE 0
117
118#define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */
119
120#define USBLP_FIRST_PROTOCOL 1
121#define USBLP_LAST_PROTOCOL 3
122#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
123
124/*
125 * some arbitrary status buffer size;
126 * need a status buffer that is allocated via kmalloc(), not on stack
127 */
128#define STATUS_BUF_SIZE 8
129
130/*
131 * Locks down the locking order:
132 * ->wmut locks wstatus.
133 * ->mut locks the whole usblp, except [rw]complete, and thus, by indirection,
134 * [rw]status. We only touch status when we know the side idle.
135 * ->lock locks what interrupt accesses.
136 */
137struct usblp {
138 struct usb_device *dev; /* USB device */
139 struct mutex wmut;
140 struct mutex mut;
141 spinlock_t lock; /* locks rcomplete, wcomplete */
142 char *readbuf; /* read transfer_buffer */
143 char *statusbuf; /* status transfer_buffer */
144 struct usb_anchor urbs;
145 wait_queue_head_t rwait, wwait;
146 int readcount; /* Counter for reads */
147 int ifnum; /* Interface number */
148 struct usb_interface *intf; /* The interface */
149 /* Alternate-setting numbers and endpoints for each protocol
150 * (7/1/{index=1,2,3}) that the device supports: */
151 struct {
152 int alt_setting;
153 struct usb_endpoint_descriptor *epwrite;
154 struct usb_endpoint_descriptor *epread;
155 } protocol[USBLP_MAX_PROTOCOLS];
156 int current_protocol;
157 int minor; /* minor number of device */
158 int wcomplete, rcomplete;
159 int wstatus; /* bytes written or error */
160 int rstatus; /* bytes ready or error */
161 unsigned int quirks; /* quirks flags */
162 unsigned int flags; /* mode flags */
163 unsigned char used; /* True if open */
164 unsigned char present; /* True if not disconnected */
165 unsigned char bidir; /* interface is bidirectional */
166 unsigned char no_paper; /* Paper Out happened */
167 unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */
168 /* first 2 bytes are (big-endian) length */
169};
170
171#ifdef DEBUG
172static void usblp_dump(struct usblp *usblp)
173{
174 struct device *dev = &usblp->intf->dev;
175 int p;
176
177 dev_dbg(dev, "usblp=0x%p\n", usblp);
178 dev_dbg(dev, "dev=0x%p\n", usblp->dev);
179 dev_dbg(dev, "present=%d\n", usblp->present);
180 dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf);
181 dev_dbg(dev, "readcount=%d\n", usblp->readcount);
182 dev_dbg(dev, "ifnum=%d\n", usblp->ifnum);
183 for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) {
184 dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p,
185 usblp->protocol[p].alt_setting);
186 dev_dbg(dev, "protocol[%d].epwrite=%p\n", p,
187 usblp->protocol[p].epwrite);
188 dev_dbg(dev, "protocol[%d].epread=%p\n", p,
189 usblp->protocol[p].epread);
190 }
191 dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol);
192 dev_dbg(dev, "minor=%d\n", usblp->minor);
193 dev_dbg(dev, "wstatus=%d\n", usblp->wstatus);
194 dev_dbg(dev, "rstatus=%d\n", usblp->rstatus);
195 dev_dbg(dev, "quirks=%d\n", usblp->quirks);
196 dev_dbg(dev, "used=%d\n", usblp->used);
197 dev_dbg(dev, "bidir=%d\n", usblp->bidir);
198 dev_dbg(dev, "device_id_string=\"%s\"\n",
199 usblp->device_id_string ?
200 usblp->device_id_string + 2 :
201 (unsigned char *)"(null)");
202}
203#endif
204
205/* Quirks: various printer quirks are handled by this table & its flags. */
206
207struct quirk_printer_struct {
208 __u16 vendorId;
209 __u16 productId;
210 unsigned int quirks;
211};
212
213#define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */
214#define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */
215#define USBLP_QUIRK_BAD_CLASS 0x4 /* descriptor uses vendor-specific Class or SubClass */
216
217static const struct quirk_printer_struct quirk_printers[] = {
218 { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */
219 { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */
220 { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */
221 { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */
222 { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */
223 { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */
224 { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
225 { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
226 { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */
227 { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */
228 { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
229 { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
230 { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
231 { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
232 { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
233 { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
234 { 0, 0 }
235};
236
237static int usblp_wwait(struct usblp *usblp, int nonblock);
238static int usblp_wtest(struct usblp *usblp, int nonblock);
239static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock);
240static int usblp_rtest(struct usblp *usblp, int nonblock);
241static int usblp_submit_read(struct usblp *usblp);
242static int usblp_select_alts(struct usblp *usblp);
243static int usblp_set_protocol(struct usblp *usblp, int protocol);
244static int usblp_cache_device_id_string(struct usblp *usblp);
245
246/* forward reference to make our lives easier */
247static struct usb_driver usblp_driver;
248static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */
249
250/*
251 * Functions for usblp control messages.
252 */
253
254static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len)
255{
256 int retval;
257 int index = usblp->ifnum;
258
259 /* High byte has the interface index.
260 Low byte has the alternate setting.
261 */
262 if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS))
263 index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
264
265 retval = usb_control_msg(usblp->dev,
266 dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
267 request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT);
268 dev_dbg(&usblp->intf->dev,
269 "usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n",
270 request, !!dir, recip, value, index, len, retval);
271 return retval < 0 ? retval : 0;
272}
273
274#define usblp_read_status(usblp, status)\
275 usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
276#define usblp_get_id(usblp, config, id, maxlen)\
277 usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
278#define usblp_reset(usblp)\
279 usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
280
281#define usblp_hp_channel_change_request(usblp, channel, buffer) \
282 usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
283
284/*
285 * See the description for usblp_select_alts() below for the usage
286 * explanation. Look into your /proc/bus/usb/devices and dmesg in
287 * case of any trouble.
288 */
289static int proto_bias = -1;
290
291/*
292 * URB callback.
293 */
294
295static void usblp_bulk_read(struct urb *urb)
296{
297 struct usblp *usblp = urb->context;
298 int status = urb->status;
299
300 if (usblp->present && usblp->used) {
301 if (status)
302 printk(KERN_WARNING "usblp%d: "
303 "nonzero read bulk status received: %d\n",
304 usblp->minor, status);
305 }
306 spin_lock(&usblp->lock);
307 if (status < 0)
308 usblp->rstatus = status;
309 else
310 usblp->rstatus = urb->actual_length;
311 usblp->rcomplete = 1;
312 wake_up(&usblp->rwait);
313 spin_unlock(&usblp->lock);
314
315 usb_free_urb(urb);
316}
317
318static void usblp_bulk_write(struct urb *urb)
319{
320 struct usblp *usblp = urb->context;
321 int status = urb->status;
322
323 if (usblp->present && usblp->used) {
324 if (status)
325 printk(KERN_WARNING "usblp%d: "
326 "nonzero write bulk status received: %d\n",
327 usblp->minor, status);
328 }
329 spin_lock(&usblp->lock);
330 if (status < 0)
331 usblp->wstatus = status;
332 else
333 usblp->wstatus = urb->actual_length;
334 usblp->no_paper = 0;
335 usblp->wcomplete = 1;
336 wake_up(&usblp->wwait);
337 spin_unlock(&usblp->lock);
338
339 usb_free_urb(urb);
340}
341
342/*
343 * Get and print printer errors.
344 */
345
346static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" };
347
348static int usblp_check_status(struct usblp *usblp, int err)
349{
350 unsigned char status, newerr = 0;
351 int error;
352
353 mutex_lock(&usblp->mut);
354 if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
355 mutex_unlock(&usblp->mut);
356 printk_ratelimited(KERN_ERR
357 "usblp%d: error %d reading printer status\n",
358 usblp->minor, error);
359 return 0;
360 }
361 status = *usblp->statusbuf;
362 mutex_unlock(&usblp->mut);
363
364 if (~status & LP_PERRORP)
365 newerr = 3;
366 if (status & LP_POUTPA)
367 newerr = 1;
368 if (~status & LP_PSELECD)
369 newerr = 2;
370
371 if (newerr != err) {
372 printk(KERN_INFO "usblp%d: %s\n",
373 usblp->minor, usblp_messages[newerr]);
374 }
375
376 return newerr;
377}
378
379static int handle_bidir(struct usblp *usblp)
380{
381 if (usblp->bidir && usblp->used) {
382 if (usblp_submit_read(usblp) < 0)
383 return -EIO;
384 }
385 return 0;
386}
387
388/*
389 * File op functions.
390 */
391
392static int usblp_open(struct inode *inode, struct file *file)
393{
394 int minor = iminor(inode);
395 struct usblp *usblp;
396 struct usb_interface *intf;
397 int retval;
398
399 if (minor < 0)
400 return -ENODEV;
401
402 mutex_lock(&usblp_mutex);
403
404 retval = -ENODEV;
405 intf = usb_find_interface(&usblp_driver, minor);
406 if (!intf)
407 goto out;
408 usblp = usb_get_intfdata(intf);
409 if (!usblp || !usblp->dev || !usblp->present)
410 goto out;
411
412 retval = -EBUSY;
413 if (usblp->used)
414 goto out;
415
416 /*
417 * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons:
418 * - We do not want persistent state which close(2) does not clear
419 * - It is not used anyway, according to CUPS people
420 */
421
422 retval = usb_autopm_get_interface(intf);
423 if (retval < 0)
424 goto out;
425 usblp->used = 1;
426 file->private_data = usblp;
427
428 usblp->wcomplete = 1; /* we begin writeable */
429 usblp->wstatus = 0;
430 usblp->rcomplete = 0;
431
432 if (handle_bidir(usblp) < 0) {
433 usb_autopm_put_interface(intf);
434 usblp->used = 0;
435 file->private_data = NULL;
436 retval = -EIO;
437 }
438out:
439 mutex_unlock(&usblp_mutex);
440 return retval;
441}
442
443static void usblp_cleanup(struct usblp *usblp)
444{
445 printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
446
447 kfree(usblp->readbuf);
448 kfree(usblp->device_id_string);
449 kfree(usblp->statusbuf);
450 kfree(usblp);
451}
452
453static void usblp_unlink_urbs(struct usblp *usblp)
454{
455 usb_kill_anchored_urbs(&usblp->urbs);
456}
457
458static int usblp_release(struct inode *inode, struct file *file)
459{
460 struct usblp *usblp = file->private_data;
461
462 usblp->flags &= ~LP_ABORT;
463
464 mutex_lock(&usblp_mutex);
465 usblp->used = 0;
466 if (usblp->present) {
467 usblp_unlink_urbs(usblp);
468 usb_autopm_put_interface(usblp->intf);
469 } else /* finish cleanup from disconnect */
470 usblp_cleanup(usblp);
471 mutex_unlock(&usblp_mutex);
472 return 0;
473}
474
475/* No kernel lock - fine */
476static unsigned int usblp_poll(struct file *file, struct poll_table_struct *wait)
477{
478 int ret;
479 unsigned long flags;
480
481 struct usblp *usblp = file->private_data;
482 /* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */
483 poll_wait(file, &usblp->rwait, wait);
484 poll_wait(file, &usblp->wwait, wait);
485 spin_lock_irqsave(&usblp->lock, flags);
486 ret = ((usblp->bidir && usblp->rcomplete) ? POLLIN | POLLRDNORM : 0) |
487 ((usblp->no_paper || usblp->wcomplete) ? POLLOUT | POLLWRNORM : 0);
488 spin_unlock_irqrestore(&usblp->lock, flags);
489 return ret;
490}
491
492static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
493{
494 struct usblp *usblp = file->private_data;
495 int length, err, i;
496 unsigned char newChannel;
497 int status;
498 int twoints[2];
499 int retval = 0;
500
501 mutex_lock(&usblp->mut);
502 if (!usblp->present) {
503 retval = -ENODEV;
504 goto done;
505 }
506
507 dev_dbg(&usblp->intf->dev,
508 "usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd,
509 _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
510
511 if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */
512
513 switch (_IOC_NR(cmd)) {
514
515 case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
516 if (_IOC_DIR(cmd) != _IOC_READ) {
517 retval = -EINVAL;
518 goto done;
519 }
520
521 length = usblp_cache_device_id_string(usblp);
522 if (length < 0) {
523 retval = length;
524 goto done;
525 }
526 if (length > _IOC_SIZE(cmd))
527 length = _IOC_SIZE(cmd); /* truncate */
528
529 if (copy_to_user((void __user *) arg,
530 usblp->device_id_string,
531 (unsigned long) length)) {
532 retval = -EFAULT;
533 goto done;
534 }
535
536 break;
537
538 case IOCNR_GET_PROTOCOLS:
539 if (_IOC_DIR(cmd) != _IOC_READ ||
540 _IOC_SIZE(cmd) < sizeof(twoints)) {
541 retval = -EINVAL;
542 goto done;
543 }
544
545 twoints[0] = usblp->current_protocol;
546 twoints[1] = 0;
547 for (i = USBLP_FIRST_PROTOCOL;
548 i <= USBLP_LAST_PROTOCOL; i++) {
549 if (usblp->protocol[i].alt_setting >= 0)
550 twoints[1] |= (1<<i);
551 }
552
553 if (copy_to_user((void __user *)arg,
554 (unsigned char *)twoints,
555 sizeof(twoints))) {
556 retval = -EFAULT;
557 goto done;
558 }
559
560 break;
561
562 case IOCNR_SET_PROTOCOL:
563 if (_IOC_DIR(cmd) != _IOC_WRITE) {
564 retval = -EINVAL;
565 goto done;
566 }
567
568#ifdef DEBUG
569 if (arg == -10) {
570 usblp_dump(usblp);
571 break;
572 }
573#endif
574
575 usblp_unlink_urbs(usblp);
576 retval = usblp_set_protocol(usblp, arg);
577 if (retval < 0) {
578 usblp_set_protocol(usblp,
579 usblp->current_protocol);
580 }
581 break;
582
583 case IOCNR_HP_SET_CHANNEL:
584 if (_IOC_DIR(cmd) != _IOC_WRITE ||
585 le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
586 usblp->quirks & USBLP_QUIRK_BIDIR) {
587 retval = -EINVAL;
588 goto done;
589 }
590
591 err = usblp_hp_channel_change_request(usblp,
592 arg, &newChannel);
593 if (err < 0) {
594 dev_err(&usblp->dev->dev,
595 "usblp%d: error = %d setting "
596 "HP channel\n",
597 usblp->minor, err);
598 retval = -EIO;
599 goto done;
600 }
601
602 dev_dbg(&usblp->intf->dev,
603 "usblp%d requested/got HP channel %ld/%d\n",
604 usblp->minor, arg, newChannel);
605 break;
606
607 case IOCNR_GET_BUS_ADDRESS:
608 if (_IOC_DIR(cmd) != _IOC_READ ||
609 _IOC_SIZE(cmd) < sizeof(twoints)) {
610 retval = -EINVAL;
611 goto done;
612 }
613
614 twoints[0] = usblp->dev->bus->busnum;
615 twoints[1] = usblp->dev->devnum;
616 if (copy_to_user((void __user *)arg,
617 (unsigned char *)twoints,
618 sizeof(twoints))) {
619 retval = -EFAULT;
620 goto done;
621 }
622
623 dev_dbg(&usblp->intf->dev,
624 "usblp%d is bus=%d, device=%d\n",
625 usblp->minor, twoints[0], twoints[1]);
626 break;
627
628 case IOCNR_GET_VID_PID:
629 if (_IOC_DIR(cmd) != _IOC_READ ||
630 _IOC_SIZE(cmd) < sizeof(twoints)) {
631 retval = -EINVAL;
632 goto done;
633 }
634
635 twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
636 twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
637 if (copy_to_user((void __user *)arg,
638 (unsigned char *)twoints,
639 sizeof(twoints))) {
640 retval = -EFAULT;
641 goto done;
642 }
643
644 dev_dbg(&usblp->intf->dev,
645 "usblp%d is VID=0x%4.4X, PID=0x%4.4X\n",
646 usblp->minor, twoints[0], twoints[1]);
647 break;
648
649 case IOCNR_SOFT_RESET:
650 if (_IOC_DIR(cmd) != _IOC_NONE) {
651 retval = -EINVAL;
652 goto done;
653 }
654 retval = usblp_reset(usblp);
655 break;
656 default:
657 retval = -ENOTTY;
658 }
659 else /* old-style ioctl value */
660 switch (cmd) {
661
662 case LPGETSTATUS:
663 if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
664 printk_ratelimited(KERN_ERR "usblp%d:"
665 "failed reading printer status (%d)\n",
666 usblp->minor, retval);
667 retval = -EIO;
668 goto done;
669 }
670 status = *usblp->statusbuf;
671 if (copy_to_user((void __user *)arg, &status, sizeof(int)))
672 retval = -EFAULT;
673 break;
674
675 case LPABORT:
676 if (arg)
677 usblp->flags |= LP_ABORT;
678 else
679 usblp->flags &= ~LP_ABORT;
680 break;
681
682 default:
683 retval = -ENOTTY;
684 }
685
686done:
687 mutex_unlock(&usblp->mut);
688 return retval;
689}
690
691static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length)
692{
693 struct urb *urb;
694 char *writebuf;
695
696 if ((writebuf = kmalloc(transfer_length, GFP_KERNEL)) == NULL)
697 return NULL;
698 if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL) {
699 kfree(writebuf);
700 return NULL;
701 }
702
703 usb_fill_bulk_urb(urb, usblp->dev,
704 usb_sndbulkpipe(usblp->dev,
705 usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
706 writebuf, transfer_length, usblp_bulk_write, usblp);
707 urb->transfer_flags |= URB_FREE_BUFFER;
708
709 return urb;
710}
711
712static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
713{
714 struct usblp *usblp = file->private_data;
715 struct urb *writeurb;
716 int rv;
717 int transfer_length;
718 ssize_t writecount = 0;
719
720 if (mutex_lock_interruptible(&usblp->wmut)) {
721 rv = -EINTR;
722 goto raise_biglock;
723 }
724 if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0)
725 goto raise_wait;
726
727 while (writecount < count) {
728 /*
729 * Step 1: Submit next block.
730 */
731 if ((transfer_length = count - writecount) > USBLP_BUF_SIZE)
732 transfer_length = USBLP_BUF_SIZE;
733
734 rv = -ENOMEM;
735 if ((writeurb = usblp_new_writeurb(usblp, transfer_length)) == NULL)
736 goto raise_urb;
737 usb_anchor_urb(writeurb, &usblp->urbs);
738
739 if (copy_from_user(writeurb->transfer_buffer,
740 buffer + writecount, transfer_length)) {
741 rv = -EFAULT;
742 goto raise_badaddr;
743 }
744
745 spin_lock_irq(&usblp->lock);
746 usblp->wcomplete = 0;
747 spin_unlock_irq(&usblp->lock);
748 if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) {
749 usblp->wstatus = 0;
750 spin_lock_irq(&usblp->lock);
751 usblp->no_paper = 0;
752 usblp->wcomplete = 1;
753 wake_up(&usblp->wwait);
754 spin_unlock_irq(&usblp->lock);
755 if (rv != -ENOMEM)
756 rv = -EIO;
757 goto raise_submit;
758 }
759
760 /*
761 * Step 2: Wait for transfer to end, collect results.
762 */
763 rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK));
764 if (rv < 0) {
765 if (rv == -EAGAIN) {
766 /* Presume that it's going to complete well. */
767 writecount += transfer_length;
768 }
769 if (rv == -ENOSPC) {
770 spin_lock_irq(&usblp->lock);
771 usblp->no_paper = 1; /* Mark for poll(2) */
772 spin_unlock_irq(&usblp->lock);
773 writecount += transfer_length;
774 }
775 /* Leave URB dangling, to be cleaned on close. */
776 goto collect_error;
777 }
778
779 if (usblp->wstatus < 0) {
780 rv = -EIO;
781 goto collect_error;
782 }
783 /*
784 * This is critical: it must be our URB, not other writer's.
785 * The wmut exists mainly to cover us here.
786 */
787 writecount += usblp->wstatus;
788 }
789
790 mutex_unlock(&usblp->wmut);
791 return writecount;
792
793raise_submit:
794raise_badaddr:
795 usb_unanchor_urb(writeurb);
796 usb_free_urb(writeurb);
797raise_urb:
798raise_wait:
799collect_error: /* Out of raise sequence */
800 mutex_unlock(&usblp->wmut);
801raise_biglock:
802 return writecount ? writecount : rv;
803}
804
805/*
806 * Notice that we fail to restart in a few cases: on EFAULT, on restart
807 * error, etc. This is the historical behaviour. In all such cases we return
808 * EIO, and applications loop in order to get the new read going.
809 */
810static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos)
811{
812 struct usblp *usblp = file->private_data;
813 ssize_t count;
814 ssize_t avail;
815 int rv;
816
817 if (!usblp->bidir)
818 return -EINVAL;
819
820 rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK));
821 if (rv < 0)
822 return rv;
823
824 if ((avail = usblp->rstatus) < 0) {
825 printk(KERN_ERR "usblp%d: error %d reading from printer\n",
826 usblp->minor, (int)avail);
827 usblp_submit_read(usblp);
828 count = -EIO;
829 goto done;
830 }
831
832 count = len < avail - usblp->readcount ? len : avail - usblp->readcount;
833 if (count != 0 &&
834 copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) {
835 count = -EFAULT;
836 goto done;
837 }
838
839 if ((usblp->readcount += count) == avail) {
840 if (usblp_submit_read(usblp) < 0) {
841 /* We don't want to leak USB return codes into errno. */
842 if (count == 0)
843 count = -EIO;
844 goto done;
845 }
846 }
847
848done:
849 mutex_unlock(&usblp->mut);
850 return count;
851}
852
853/*
854 * Wait for the write path to come idle.
855 * This is called under the ->wmut, so the idle path stays idle.
856 *
857 * Our write path has a peculiar property: it does not buffer like a tty,
858 * but waits for the write to succeed. This allows our ->release to bug out
859 * without waiting for writes to drain. But it obviously does not work
860 * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use
861 * select(2) or poll(2) to wait for the buffer to drain before closing.
862 * Alternatively, set blocking mode with fcntl and issue a zero-size write.
863 */
864static int usblp_wwait(struct usblp *usblp, int nonblock)
865{
866 DECLARE_WAITQUEUE(waita, current);
867 int rc;
868 int err = 0;
869
870 add_wait_queue(&usblp->wwait, &waita);
871 for (;;) {
872 set_current_state(TASK_INTERRUPTIBLE);
873 if (mutex_lock_interruptible(&usblp->mut)) {
874 rc = -EINTR;
875 break;
876 }
877 rc = usblp_wtest(usblp, nonblock);
878 mutex_unlock(&usblp->mut);
879 if (rc <= 0)
880 break;
881
882 if (schedule_timeout(msecs_to_jiffies(1500)) == 0) {
883 if (usblp->flags & LP_ABORT) {
884 err = usblp_check_status(usblp, err);
885 if (err == 1) { /* Paper out */
886 rc = -ENOSPC;
887 break;
888 }
889 } else {
890 /* Prod the printer, Gentoo#251237. */
891 mutex_lock(&usblp->mut);
892 usblp_read_status(usblp, usblp->statusbuf);
893 mutex_unlock(&usblp->mut);
894 }
895 }
896 }
897 set_current_state(TASK_RUNNING);
898 remove_wait_queue(&usblp->wwait, &waita);
899 return rc;
900}
901
902static int usblp_wtest(struct usblp *usblp, int nonblock)
903{
904 unsigned long flags;
905
906 if (!usblp->present)
907 return -ENODEV;
908 if (signal_pending(current))
909 return -EINTR;
910 spin_lock_irqsave(&usblp->lock, flags);
911 if (usblp->wcomplete) {
912 spin_unlock_irqrestore(&usblp->lock, flags);
913 return 0;
914 }
915 spin_unlock_irqrestore(&usblp->lock, flags);
916 if (nonblock)
917 return -EAGAIN;
918 return 1;
919}
920
921/*
922 * Wait for read bytes to become available. This probably should have been
923 * called usblp_r_lock_and_wait(), because we lock first. But it's a traditional
924 * name for functions which lock and return.
925 *
926 * We do not use wait_event_interruptible because it makes locking iffy.
927 */
928static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock)
929{
930 DECLARE_WAITQUEUE(waita, current);
931 int rc;
932
933 add_wait_queue(&usblp->rwait, &waita);
934 for (;;) {
935 if (mutex_lock_interruptible(&usblp->mut)) {
936 rc = -EINTR;
937 break;
938 }
939 set_current_state(TASK_INTERRUPTIBLE);
940 if ((rc = usblp_rtest(usblp, nonblock)) < 0) {
941 mutex_unlock(&usblp->mut);
942 break;
943 }
944 if (rc == 0) /* Keep it locked */
945 break;
946 mutex_unlock(&usblp->mut);
947 schedule();
948 }
949 set_current_state(TASK_RUNNING);
950 remove_wait_queue(&usblp->rwait, &waita);
951 return rc;
952}
953
954static int usblp_rtest(struct usblp *usblp, int nonblock)
955{
956 unsigned long flags;
957
958 if (!usblp->present)
959 return -ENODEV;
960 if (signal_pending(current))
961 return -EINTR;
962 spin_lock_irqsave(&usblp->lock, flags);
963 if (usblp->rcomplete) {
964 spin_unlock_irqrestore(&usblp->lock, flags);
965 return 0;
966 }
967 spin_unlock_irqrestore(&usblp->lock, flags);
968 if (nonblock)
969 return -EAGAIN;
970 return 1;
971}
972
973/*
974 * Please check ->bidir and other such things outside for now.
975 */
976static int usblp_submit_read(struct usblp *usblp)
977{
978 struct urb *urb;
979 unsigned long flags;
980 int rc;
981
982 rc = -ENOMEM;
983 if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL)
984 goto raise_urb;
985
986 usb_fill_bulk_urb(urb, usblp->dev,
987 usb_rcvbulkpipe(usblp->dev,
988 usblp->protocol[usblp->current_protocol].epread->bEndpointAddress),
989 usblp->readbuf, USBLP_BUF_SIZE_IN,
990 usblp_bulk_read, usblp);
991 usb_anchor_urb(urb, &usblp->urbs);
992
993 spin_lock_irqsave(&usblp->lock, flags);
994 usblp->readcount = 0; /* XXX Why here? */
995 usblp->rcomplete = 0;
996 spin_unlock_irqrestore(&usblp->lock, flags);
997 if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) {
998 dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc);
999 spin_lock_irqsave(&usblp->lock, flags);
1000 usblp->rstatus = rc;
1001 usblp->rcomplete = 1;
1002 spin_unlock_irqrestore(&usblp->lock, flags);
1003 goto raise_submit;
1004 }
1005
1006 return 0;
1007
1008raise_submit:
1009 usb_unanchor_urb(urb);
1010 usb_free_urb(urb);
1011raise_urb:
1012 return rc;
1013}
1014
1015/*
1016 * Checks for printers that have quirks, such as requiring unidirectional
1017 * communication but reporting bidirectional; currently some HP printers
1018 * have this flaw (HP 810, 880, 895, etc.), or needing an init string
1019 * sent at each open (like some Epsons).
1020 * Returns 1 if found, 0 if not found.
1021 *
1022 * HP recommended that we use the bidirectional interface but
1023 * don't attempt any bulk IN transfers from the IN endpoint.
1024 * Here's some more detail on the problem:
1025 * The problem is not that it isn't bidirectional though. The problem
1026 * is that if you request a device ID, or status information, while
1027 * the buffers are full, the return data will end up in the print data
1028 * buffer. For example if you make sure you never request the device ID
1029 * while you are sending print data, and you don't try to query the
1030 * printer status every couple of milliseconds, you will probably be OK.
1031 */
1032static unsigned int usblp_quirks(__u16 vendor, __u16 product)
1033{
1034 int i;
1035
1036 for (i = 0; quirk_printers[i].vendorId; i++) {
1037 if (vendor == quirk_printers[i].vendorId &&
1038 product == quirk_printers[i].productId)
1039 return quirk_printers[i].quirks;
1040 }
1041 return 0;
1042}
1043
1044static const struct file_operations usblp_fops = {
1045 .owner = THIS_MODULE,
1046 .read = usblp_read,
1047 .write = usblp_write,
1048 .poll = usblp_poll,
1049 .unlocked_ioctl = usblp_ioctl,
1050 .compat_ioctl = usblp_ioctl,
1051 .open = usblp_open,
1052 .release = usblp_release,
1053 .llseek = noop_llseek,
1054};
1055
1056static char *usblp_devnode(struct device *dev, umode_t *mode)
1057{
1058 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
1059}
1060
1061static struct usb_class_driver usblp_class = {
1062 .name = "lp%d",
1063 .devnode = usblp_devnode,
1064 .fops = &usblp_fops,
1065 .minor_base = USBLP_MINOR_BASE,
1066};
1067
1068static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf)
1069{
1070 struct usb_interface *intf = to_usb_interface(dev);
1071 struct usblp *usblp = usb_get_intfdata(intf);
1072
1073 if (usblp->device_id_string[0] == 0 &&
1074 usblp->device_id_string[1] == 0)
1075 return 0;
1076
1077 return sprintf(buf, "%s", usblp->device_id_string+2);
1078}
1079
1080static DEVICE_ATTR(ieee1284_id, S_IRUGO, usblp_show_ieee1284_id, NULL);
1081
1082static int usblp_probe(struct usb_interface *intf,
1083 const struct usb_device_id *id)
1084{
1085 struct usb_device *dev = interface_to_usbdev(intf);
1086 struct usblp *usblp;
1087 int protocol;
1088 int retval;
1089
1090 /* Malloc and start initializing usblp structure so we can use it
1091 * directly. */
1092 usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL);
1093 if (!usblp) {
1094 retval = -ENOMEM;
1095 goto abort_ret;
1096 }
1097 usblp->dev = dev;
1098 mutex_init(&usblp->wmut);
1099 mutex_init(&usblp->mut);
1100 spin_lock_init(&usblp->lock);
1101 init_waitqueue_head(&usblp->rwait);
1102 init_waitqueue_head(&usblp->wwait);
1103 init_usb_anchor(&usblp->urbs);
1104 usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
1105 usblp->intf = intf;
1106
1107 /* Malloc device ID string buffer to the largest expected length,
1108 * since we can re-query it on an ioctl and a dynamic string
1109 * could change in length. */
1110 if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
1111 retval = -ENOMEM;
1112 goto abort;
1113 }
1114
1115 /*
1116 * Allocate read buffer. We somewhat wastefully
1117 * malloc both regardless of bidirectionality, because the
1118 * alternate setting can be changed later via an ioctl.
1119 */
1120 if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) {
1121 retval = -ENOMEM;
1122 goto abort;
1123 }
1124
1125 /* Allocate buffer for printer status */
1126 usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL);
1127 if (!usblp->statusbuf) {
1128 retval = -ENOMEM;
1129 goto abort;
1130 }
1131
1132 /* Lookup quirks for this printer. */
1133 usblp->quirks = usblp_quirks(
1134 le16_to_cpu(dev->descriptor.idVendor),
1135 le16_to_cpu(dev->descriptor.idProduct));
1136
1137 /* Analyze and pick initial alternate settings and endpoints. */
1138 protocol = usblp_select_alts(usblp);
1139 if (protocol < 0) {
1140 dev_dbg(&intf->dev,
1141 "incompatible printer-class device 0x%4.4X/0x%4.4X\n",
1142 le16_to_cpu(dev->descriptor.idVendor),
1143 le16_to_cpu(dev->descriptor.idProduct));
1144 retval = -ENODEV;
1145 goto abort;
1146 }
1147
1148 /* Setup the selected alternate setting and endpoints. */
1149 if (usblp_set_protocol(usblp, protocol) < 0) {
1150 retval = -ENODEV; /* ->probe isn't ->ioctl */
1151 goto abort;
1152 }
1153
1154 /* Retrieve and store the device ID string. */
1155 usblp_cache_device_id_string(usblp);
1156 retval = device_create_file(&intf->dev, &dev_attr_ieee1284_id);
1157 if (retval)
1158 goto abort_intfdata;
1159
1160#ifdef DEBUG
1161 usblp_check_status(usblp, 0);
1162#endif
1163
1164 usb_set_intfdata(intf, usblp);
1165
1166 usblp->present = 1;
1167
1168 retval = usb_register_dev(intf, &usblp_class);
1169 if (retval) {
1170 dev_err(&intf->dev,
1171 "usblp: Not able to get a minor (base %u, slice default): %d\n",
1172 USBLP_MINOR_BASE, retval);
1173 goto abort_intfdata;
1174 }
1175 usblp->minor = intf->minor;
1176 dev_info(&intf->dev,
1177 "usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n",
1178 usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
1179 usblp->ifnum,
1180 usblp->protocol[usblp->current_protocol].alt_setting,
1181 usblp->current_protocol,
1182 le16_to_cpu(usblp->dev->descriptor.idVendor),
1183 le16_to_cpu(usblp->dev->descriptor.idProduct));
1184
1185 return 0;
1186
1187abort_intfdata:
1188 usb_set_intfdata(intf, NULL);
1189 device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
1190abort:
1191 kfree(usblp->readbuf);
1192 kfree(usblp->statusbuf);
1193 kfree(usblp->device_id_string);
1194 kfree(usblp);
1195abort_ret:
1196 return retval;
1197}
1198
1199/*
1200 * We are a "new" style driver with usb_device_id table,
1201 * but our requirements are too intricate for simple match to handle.
1202 *
1203 * The "proto_bias" option may be used to specify the preferred protocol
1204 * for all USB printers (1=7/1/1, 2=7/1/2, 3=7/1/3). If the device
1205 * supports the preferred protocol, then we bind to it.
1206 *
1207 * The best interface for us is 7/1/2, because it is compatible
1208 * with a stream of characters. If we find it, we bind to it.
1209 *
1210 * Note that the people from hpoj.sourceforge.net need to be able to
1211 * bind to 7/1/3 (MLC/1284.4), so we provide them ioctls for this purpose.
1212 *
1213 * Failing 7/1/2, we look for 7/1/3, even though it's probably not
1214 * stream-compatible, because this matches the behaviour of the old code.
1215 *
1216 * If nothing else, we bind to 7/1/1 - the unidirectional interface.
1217 */
1218static int usblp_select_alts(struct usblp *usblp)
1219{
1220 struct usb_interface *if_alt;
1221 struct usb_host_interface *ifd;
1222 struct usb_endpoint_descriptor *epd, *epwrite, *epread;
1223 int p, i, e;
1224
1225 if_alt = usblp->intf;
1226
1227 for (p = 0; p < USBLP_MAX_PROTOCOLS; p++)
1228 usblp->protocol[p].alt_setting = -1;
1229
1230 /* Find out what we have. */
1231 for (i = 0; i < if_alt->num_altsetting; i++) {
1232 ifd = &if_alt->altsetting[i];
1233
1234 if (ifd->desc.bInterfaceClass != 7 || ifd->desc.bInterfaceSubClass != 1)
1235 if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS))
1236 continue;
1237
1238 if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL ||
1239 ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL)
1240 continue;
1241
1242 /* Look for bulk OUT and IN endpoints. */
1243 epwrite = epread = NULL;
1244 for (e = 0; e < ifd->desc.bNumEndpoints; e++) {
1245 epd = &ifd->endpoint[e].desc;
1246
1247 if (usb_endpoint_is_bulk_out(epd))
1248 if (!epwrite)
1249 epwrite = epd;
1250
1251 if (usb_endpoint_is_bulk_in(epd))
1252 if (!epread)
1253 epread = epd;
1254 }
1255
1256 /* Ignore buggy hardware without the right endpoints. */
1257 if (!epwrite || (ifd->desc.bInterfaceProtocol > 1 && !epread))
1258 continue;
1259
1260 /* Turn off reads for 7/1/1 (unidirectional) interfaces
1261 * and buggy bidirectional printers. */
1262 if (ifd->desc.bInterfaceProtocol == 1) {
1263 epread = NULL;
1264 } else if (usblp->quirks & USBLP_QUIRK_BIDIR) {
1265 printk(KERN_INFO "usblp%d: Disabling reads from "
1266 "problematic bidirectional printer\n",
1267 usblp->minor);
1268 epread = NULL;
1269 }
1270
1271 usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting =
1272 ifd->desc.bAlternateSetting;
1273 usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite;
1274 usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread;
1275 }
1276
1277 /* If our requested protocol is supported, then use it. */
1278 if (proto_bias >= USBLP_FIRST_PROTOCOL &&
1279 proto_bias <= USBLP_LAST_PROTOCOL &&
1280 usblp->protocol[proto_bias].alt_setting != -1)
1281 return proto_bias;
1282
1283 /* Ordering is important here. */
1284 if (usblp->protocol[2].alt_setting != -1)
1285 return 2;
1286 if (usblp->protocol[1].alt_setting != -1)
1287 return 1;
1288 if (usblp->protocol[3].alt_setting != -1)
1289 return 3;
1290
1291 /* If nothing is available, then don't bind to this device. */
1292 return -1;
1293}
1294
1295static int usblp_set_protocol(struct usblp *usblp, int protocol)
1296{
1297 int r, alts;
1298
1299 if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL)
1300 return -EINVAL;
1301
1302 alts = usblp->protocol[protocol].alt_setting;
1303 if (alts < 0)
1304 return -EINVAL;
1305 r = usb_set_interface(usblp->dev, usblp->ifnum, alts);
1306 if (r < 0) {
1307 printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n",
1308 alts, usblp->ifnum);
1309 return r;
1310 }
1311
1312 usblp->bidir = (usblp->protocol[protocol].epread != NULL);
1313 usblp->current_protocol = protocol;
1314 dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n",
1315 usblp->minor, protocol);
1316 return 0;
1317}
1318
1319/* Retrieves and caches device ID string.
1320 * Returns length, including length bytes but not null terminator.
1321 * On error, returns a negative errno value. */
1322static int usblp_cache_device_id_string(struct usblp *usblp)
1323{
1324 int err, length;
1325
1326 err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1);
1327 if (err < 0) {
1328 dev_dbg(&usblp->intf->dev,
1329 "usblp%d: error = %d reading IEEE-1284 Device ID string\n",
1330 usblp->minor, err);
1331 usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
1332 return -EIO;
1333 }
1334
1335 /* First two bytes are length in big-endian.
1336 * They count themselves, and we copy them into
1337 * the user's buffer. */
1338 length = be16_to_cpu(*((__be16 *)usblp->device_id_string));
1339 if (length < 2)
1340 length = 2;
1341 else if (length >= USBLP_DEVICE_ID_SIZE)
1342 length = USBLP_DEVICE_ID_SIZE - 1;
1343 usblp->device_id_string[length] = '\0';
1344
1345 dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n",
1346 usblp->minor, length, &usblp->device_id_string[2]);
1347
1348 return length;
1349}
1350
1351static void usblp_disconnect(struct usb_interface *intf)
1352{
1353 struct usblp *usblp = usb_get_intfdata(intf);
1354
1355 usb_deregister_dev(intf, &usblp_class);
1356
1357 if (!usblp || !usblp->dev) {
1358 dev_err(&intf->dev, "bogus disconnect\n");
1359 BUG();
1360 }
1361
1362 device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
1363
1364 mutex_lock(&usblp_mutex);
1365 mutex_lock(&usblp->mut);
1366 usblp->present = 0;
1367 wake_up(&usblp->wwait);
1368 wake_up(&usblp->rwait);
1369 usb_set_intfdata(intf, NULL);
1370
1371 usblp_unlink_urbs(usblp);
1372 mutex_unlock(&usblp->mut);
1373
1374 if (!usblp->used)
1375 usblp_cleanup(usblp);
1376 mutex_unlock(&usblp_mutex);
1377}
1378
1379static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
1380{
1381 struct usblp *usblp = usb_get_intfdata(intf);
1382
1383 usblp_unlink_urbs(usblp);
1384#if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
1385 /* not strictly necessary, but just in case */
1386 wake_up(&usblp->wwait);
1387 wake_up(&usblp->rwait);
1388#endif
1389
1390 return 0;
1391}
1392
1393static int usblp_resume(struct usb_interface *intf)
1394{
1395 struct usblp *usblp = usb_get_intfdata(intf);
1396 int r;
1397
1398 r = handle_bidir(usblp);
1399
1400 return r;
1401}
1402
1403static const struct usb_device_id usblp_ids[] = {
1404 { USB_DEVICE_INFO(7, 1, 1) },
1405 { USB_DEVICE_INFO(7, 1, 2) },
1406 { USB_DEVICE_INFO(7, 1, 3) },
1407 { USB_INTERFACE_INFO(7, 1, 1) },
1408 { USB_INTERFACE_INFO(7, 1, 2) },
1409 { USB_INTERFACE_INFO(7, 1, 3) },
1410 { USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */
1411 { } /* Terminating entry */
1412};
1413
1414MODULE_DEVICE_TABLE(usb, usblp_ids);
1415
1416static struct usb_driver usblp_driver = {
1417 .name = "usblp",
1418 .probe = usblp_probe,
1419 .disconnect = usblp_disconnect,
1420 .suspend = usblp_suspend,
1421 .resume = usblp_resume,
1422 .id_table = usblp_ids,
1423 .supports_autosuspend = 1,
1424};
1425
1426module_usb_driver(usblp_driver);
1427
1428MODULE_AUTHOR(DRIVER_AUTHOR);
1429MODULE_DESCRIPTION(DRIVER_DESC);
1430module_param(proto_bias, int, S_IRUGO | S_IWUSR);
1431MODULE_PARM_DESC(proto_bias, "Favourite protocol number");
1432MODULE_LICENSE("GPL");