Loading...
1/*
2 * Copyright (C) 2008 Sebastian Haas (initial chardev implementation)
3 * Copyright (C) 2010 Markus Plessing <plessing@ems-wuensche.com>
4 * Rework for mainline by Oliver Hartkopp <socketcan@hartkopp.net>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the version 2 of the GNU General Public License
8 * as published by the Free Software Foundation
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 */
15
16#include <linux/kernel.h>
17#include <linux/module.h>
18#include <linux/interrupt.h>
19#include <linux/netdevice.h>
20#include <linux/delay.h>
21#include <linux/io.h>
22#include <pcmcia/cistpl.h>
23#include <pcmcia/ds.h>
24#include <linux/can.h>
25#include <linux/can/dev.h>
26#include "sja1000.h"
27
28#define DRV_NAME "ems_pcmcia"
29
30MODULE_AUTHOR("Markus Plessing <plessing@ems-wuensche.com>");
31MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-CARD cards");
32MODULE_SUPPORTED_DEVICE("EMS CPC-CARD CAN card");
33MODULE_LICENSE("GPL v2");
34
35#define EMS_PCMCIA_MAX_CHAN 2
36
37struct ems_pcmcia_card {
38 int channels;
39 struct pcmcia_device *pcmcia_dev;
40 struct net_device *net_dev[EMS_PCMCIA_MAX_CHAN];
41 void __iomem *base_addr;
42};
43
44#define EMS_PCMCIA_CAN_CLOCK (16000000 / 2)
45
46/*
47 * The board configuration is probably following:
48 * RX1 is connected to ground.
49 * TX1 is not connected.
50 * CLKO is not connected.
51 * Setting the OCR register to 0xDA is a good idea.
52 * This means normal output mode , push-pull and the correct polarity.
53 */
54#define EMS_PCMCIA_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
55
56/*
57 * In the CDR register, you should set CBP to 1.
58 * You will probably also want to set the clock divider value to 7
59 * (meaning direct oscillator output) because the second SJA1000 chip
60 * is driven by the first one CLKOUT output.
61 */
62#define EMS_PCMCIA_CDR (CDR_CBP | CDR_CLKOUT_MASK)
63#define EMS_PCMCIA_MEM_SIZE 4096 /* Size of the remapped io-memory */
64#define EMS_PCMCIA_CAN_BASE_OFFSET 0x100 /* Offset where controllers starts */
65#define EMS_PCMCIA_CAN_CTRL_SIZE 0x80 /* Memory size for each controller */
66
67#define EMS_CMD_RESET 0x00 /* Perform a reset of the card */
68#define EMS_CMD_MAP 0x03 /* Map CAN controllers into card' memory */
69#define EMS_CMD_UMAP 0x02 /* Unmap CAN controllers from card' memory */
70
71static struct pcmcia_device_id ems_pcmcia_tbl[] = {
72 PCMCIA_DEVICE_PROD_ID123("EMS_T_W", "CPC-Card", "V2.0", 0xeab1ea23,
73 0xa338573f, 0xe4575800),
74 PCMCIA_DEVICE_NULL,
75};
76
77MODULE_DEVICE_TABLE(pcmcia, ems_pcmcia_tbl);
78
79static u8 ems_pcmcia_read_reg(const struct sja1000_priv *priv, int port)
80{
81 return readb(priv->reg_base + port);
82}
83
84static void ems_pcmcia_write_reg(const struct sja1000_priv *priv, int port,
85 u8 val)
86{
87 writeb(val, priv->reg_base + port);
88}
89
90static irqreturn_t ems_pcmcia_interrupt(int irq, void *dev_id)
91{
92 struct ems_pcmcia_card *card = dev_id;
93 struct net_device *dev;
94 irqreturn_t retval = IRQ_NONE;
95 int i, again;
96
97 /* Card not present */
98 if (readw(card->base_addr) != 0xAA55)
99 return IRQ_HANDLED;
100
101 do {
102 again = 0;
103
104 /* Check interrupt for each channel */
105 for (i = 0; i < card->channels; i++) {
106 dev = card->net_dev[i];
107 if (!dev)
108 continue;
109
110 if (sja1000_interrupt(irq, dev) == IRQ_HANDLED)
111 again = 1;
112 }
113 /* At least one channel handled the interrupt */
114 if (again)
115 retval = IRQ_HANDLED;
116
117 } while (again);
118
119 return retval;
120}
121
122/*
123 * Check if a CAN controller is present at the specified location
124 * by trying to set 'em into the PeliCAN mode
125 */
126static inline int ems_pcmcia_check_chan(struct sja1000_priv *priv)
127{
128 /* Make sure SJA1000 is in reset mode */
129 ems_pcmcia_write_reg(priv, SJA1000_MOD, 1);
130 ems_pcmcia_write_reg(priv, SJA1000_CDR, CDR_PELICAN);
131
132 /* read reset-values */
133 if (ems_pcmcia_read_reg(priv, SJA1000_CDR) == CDR_PELICAN)
134 return 1;
135
136 return 0;
137}
138
139static void ems_pcmcia_del_card(struct pcmcia_device *pdev)
140{
141 struct ems_pcmcia_card *card = pdev->priv;
142 struct net_device *dev;
143 int i;
144
145 free_irq(pdev->irq, card);
146
147 for (i = 0; i < card->channels; i++) {
148 dev = card->net_dev[i];
149 if (!dev)
150 continue;
151
152 printk(KERN_INFO "%s: removing %s on channel #%d\n",
153 DRV_NAME, dev->name, i);
154 unregister_sja1000dev(dev);
155 free_sja1000dev(dev);
156 }
157
158 writeb(EMS_CMD_UMAP, card->base_addr);
159 iounmap(card->base_addr);
160 kfree(card);
161
162 pdev->priv = NULL;
163}
164
165/*
166 * Probe PCI device for EMS CAN signature and register each available
167 * CAN channel to SJA1000 Socket-CAN subsystem.
168 */
169static int ems_pcmcia_add_card(struct pcmcia_device *pdev, unsigned long base)
170{
171 struct sja1000_priv *priv;
172 struct net_device *dev;
173 struct ems_pcmcia_card *card;
174 int err, i;
175
176 /* Allocating card structures to hold addresses, ... */
177 card = kzalloc(sizeof(struct ems_pcmcia_card), GFP_KERNEL);
178 if (!card)
179 return -ENOMEM;
180
181 pdev->priv = card;
182 card->channels = 0;
183
184 card->base_addr = ioremap(base, EMS_PCMCIA_MEM_SIZE);
185 if (!card->base_addr) {
186 err = -ENOMEM;
187 goto failure_cleanup;
188 }
189
190 /* Check for unique EMS CAN signature */
191 if (readw(card->base_addr) != 0xAA55) {
192 err = -ENODEV;
193 goto failure_cleanup;
194 }
195
196 /* Request board reset */
197 writeb(EMS_CMD_RESET, card->base_addr);
198
199 /* Make sure CAN controllers are mapped into card's memory space */
200 writeb(EMS_CMD_MAP, card->base_addr);
201
202 /* Detect available channels */
203 for (i = 0; i < EMS_PCMCIA_MAX_CHAN; i++) {
204 dev = alloc_sja1000dev(0);
205 if (!dev) {
206 err = -ENOMEM;
207 goto failure_cleanup;
208 }
209
210 card->net_dev[i] = dev;
211 priv = netdev_priv(dev);
212 priv->priv = card;
213 SET_NETDEV_DEV(dev, &pdev->dev);
214 dev->dev_id = i;
215
216 priv->irq_flags = IRQF_SHARED;
217 dev->irq = pdev->irq;
218 priv->reg_base = card->base_addr + EMS_PCMCIA_CAN_BASE_OFFSET +
219 (i * EMS_PCMCIA_CAN_CTRL_SIZE);
220
221 /* Check if channel is present */
222 if (ems_pcmcia_check_chan(priv)) {
223 priv->read_reg = ems_pcmcia_read_reg;
224 priv->write_reg = ems_pcmcia_write_reg;
225 priv->can.clock.freq = EMS_PCMCIA_CAN_CLOCK;
226 priv->ocr = EMS_PCMCIA_OCR;
227 priv->cdr = EMS_PCMCIA_CDR;
228 priv->flags |= SJA1000_CUSTOM_IRQ_HANDLER;
229
230 /* Register SJA1000 device */
231 err = register_sja1000dev(dev);
232 if (err) {
233 free_sja1000dev(dev);
234 goto failure_cleanup;
235 }
236
237 card->channels++;
238
239 printk(KERN_INFO "%s: registered %s on channel "
240 "#%d at 0x%p, irq %d\n", DRV_NAME, dev->name,
241 i, priv->reg_base, dev->irq);
242 } else
243 free_sja1000dev(dev);
244 }
245
246 err = request_irq(dev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
247 DRV_NAME, card);
248 if (!err)
249 return 0;
250
251failure_cleanup:
252 ems_pcmcia_del_card(pdev);
253 return err;
254}
255
256/*
257 * Setup PCMCIA socket and probe for EMS CPC-CARD
258 */
259static int ems_pcmcia_probe(struct pcmcia_device *dev)
260{
261 int csval;
262
263 /* General socket configuration */
264 dev->config_flags |= CONF_ENABLE_IRQ;
265 dev->config_index = 1;
266 dev->config_regs = PRESENT_OPTION;
267
268 /* The io structure describes IO port mapping */
269 dev->resource[0]->end = 16;
270 dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
271 dev->resource[1]->end = 16;
272 dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
273 dev->io_lines = 5;
274
275 /* Allocate a memory window */
276 dev->resource[2]->flags =
277 (WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE);
278 dev->resource[2]->start = dev->resource[2]->end = 0;
279
280 csval = pcmcia_request_window(dev, dev->resource[2], 0);
281 if (csval) {
282 dev_err(&dev->dev, "pcmcia_request_window failed (err=%d)\n",
283 csval);
284 return 0;
285 }
286
287 csval = pcmcia_map_mem_page(dev, dev->resource[2], dev->config_base);
288 if (csval) {
289 dev_err(&dev->dev, "pcmcia_map_mem_page failed (err=%d)\n",
290 csval);
291 return 0;
292 }
293
294 csval = pcmcia_enable_device(dev);
295 if (csval) {
296 dev_err(&dev->dev, "pcmcia_enable_device failed (err=%d)\n",
297 csval);
298 return 0;
299 }
300
301 ems_pcmcia_add_card(dev, dev->resource[2]->start);
302 return 0;
303}
304
305/*
306 * Release claimed resources
307 */
308static void ems_pcmcia_remove(struct pcmcia_device *dev)
309{
310 ems_pcmcia_del_card(dev);
311 pcmcia_disable_device(dev);
312}
313
314static struct pcmcia_driver ems_pcmcia_driver = {
315 .name = DRV_NAME,
316 .probe = ems_pcmcia_probe,
317 .remove = ems_pcmcia_remove,
318 .id_table = ems_pcmcia_tbl,
319};
320module_pcmcia_driver(ems_pcmcia_driver);
1/*
2 * Copyright (C) 2008 Sebastian Haas (initial chardev implementation)
3 * Copyright (C) 2010 Markus Plessing <plessing@ems-wuensche.com>
4 * Rework for mainline by Oliver Hartkopp <socketcan@hartkopp.net>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the version 2 of the GNU General Public License
8 * as published by the Free Software Foundation
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 */
15
16#include <linux/kernel.h>
17#include <linux/module.h>
18#include <linux/interrupt.h>
19#include <linux/netdevice.h>
20#include <linux/delay.h>
21#include <linux/io.h>
22#include <pcmcia/cistpl.h>
23#include <pcmcia/ds.h>
24#include <linux/can.h>
25#include <linux/can/dev.h>
26#include "sja1000.h"
27
28#define DRV_NAME "ems_pcmcia"
29
30MODULE_AUTHOR("Markus Plessing <plessing@ems-wuensche.com>");
31MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-CARD cards");
32MODULE_SUPPORTED_DEVICE("EMS CPC-CARD CAN card");
33MODULE_LICENSE("GPL v2");
34
35#define EMS_PCMCIA_MAX_CHAN 2
36
37struct ems_pcmcia_card {
38 int channels;
39 struct pcmcia_device *pcmcia_dev;
40 struct net_device *net_dev[EMS_PCMCIA_MAX_CHAN];
41 void __iomem *base_addr;
42};
43
44#define EMS_PCMCIA_CAN_CLOCK (16000000 / 2)
45
46/*
47 * The board configuration is probably following:
48 * RX1 is connected to ground.
49 * TX1 is not connected.
50 * CLKO is not connected.
51 * Setting the OCR register to 0xDA is a good idea.
52 * This means normal output mode , push-pull and the correct polarity.
53 */
54#define EMS_PCMCIA_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
55
56/*
57 * In the CDR register, you should set CBP to 1.
58 * You will probably also want to set the clock divider value to 7
59 * (meaning direct oscillator output) because the second SJA1000 chip
60 * is driven by the first one CLKOUT output.
61 */
62#define EMS_PCMCIA_CDR (CDR_CBP | CDR_CLKOUT_MASK)
63#define EMS_PCMCIA_MEM_SIZE 4096 /* Size of the remapped io-memory */
64#define EMS_PCMCIA_CAN_BASE_OFFSET 0x100 /* Offset where controllers starts */
65#define EMS_PCMCIA_CAN_CTRL_SIZE 0x80 /* Memory size for each controller */
66
67#define EMS_CMD_RESET 0x00 /* Perform a reset of the card */
68#define EMS_CMD_MAP 0x03 /* Map CAN controllers into card' memory */
69#define EMS_CMD_UMAP 0x02 /* Unmap CAN controllers from card' memory */
70
71static struct pcmcia_device_id ems_pcmcia_tbl[] = {
72 PCMCIA_DEVICE_PROD_ID123("EMS_T_W", "CPC-Card", "V2.0", 0xeab1ea23,
73 0xa338573f, 0xe4575800),
74 PCMCIA_DEVICE_NULL,
75};
76
77MODULE_DEVICE_TABLE(pcmcia, ems_pcmcia_tbl);
78
79static u8 ems_pcmcia_read_reg(const struct sja1000_priv *priv, int port)
80{
81 return readb(priv->reg_base + port);
82}
83
84static void ems_pcmcia_write_reg(const struct sja1000_priv *priv, int port,
85 u8 val)
86{
87 writeb(val, priv->reg_base + port);
88}
89
90static irqreturn_t ems_pcmcia_interrupt(int irq, void *dev_id)
91{
92 struct ems_pcmcia_card *card = dev_id;
93 struct net_device *dev;
94 irqreturn_t retval = IRQ_NONE;
95 int i, again;
96
97 /* Card not present */
98 if (readw(card->base_addr) != 0xAA55)
99 return IRQ_HANDLED;
100
101 do {
102 again = 0;
103
104 /* Check interrupt for each channel */
105 for (i = 0; i < card->channels; i++) {
106 dev = card->net_dev[i];
107 if (!dev)
108 continue;
109
110 if (sja1000_interrupt(irq, dev) == IRQ_HANDLED)
111 again = 1;
112 }
113 /* At least one channel handled the interrupt */
114 if (again)
115 retval = IRQ_HANDLED;
116
117 } while (again);
118
119 return retval;
120}
121
122/*
123 * Check if a CAN controller is present at the specified location
124 * by trying to set 'em into the PeliCAN mode
125 */
126static inline int ems_pcmcia_check_chan(struct sja1000_priv *priv)
127{
128 /* Make sure SJA1000 is in reset mode */
129 ems_pcmcia_write_reg(priv, SJA1000_MOD, 1);
130 ems_pcmcia_write_reg(priv, SJA1000_CDR, CDR_PELICAN);
131
132 /* read reset-values */
133 if (ems_pcmcia_read_reg(priv, SJA1000_CDR) == CDR_PELICAN)
134 return 1;
135
136 return 0;
137}
138
139static void ems_pcmcia_del_card(struct pcmcia_device *pdev)
140{
141 struct ems_pcmcia_card *card = pdev->priv;
142 struct net_device *dev;
143 int i;
144
145 free_irq(pdev->irq, card);
146
147 for (i = 0; i < card->channels; i++) {
148 dev = card->net_dev[i];
149 if (!dev)
150 continue;
151
152 printk(KERN_INFO "%s: removing %s on channel #%d\n",
153 DRV_NAME, dev->name, i);
154 unregister_sja1000dev(dev);
155 free_sja1000dev(dev);
156 }
157
158 writeb(EMS_CMD_UMAP, card->base_addr);
159 iounmap(card->base_addr);
160 kfree(card);
161
162 pdev->priv = NULL;
163}
164
165/*
166 * Probe PCI device for EMS CAN signature and register each available
167 * CAN channel to SJA1000 Socket-CAN subsystem.
168 */
169static int ems_pcmcia_add_card(struct pcmcia_device *pdev, unsigned long base)
170{
171 struct sja1000_priv *priv;
172 struct net_device *dev;
173 struct ems_pcmcia_card *card;
174 int err, i;
175
176 /* Allocating card structures to hold addresses, ... */
177 card = kzalloc(sizeof(struct ems_pcmcia_card), GFP_KERNEL);
178 if (!card)
179 return -ENOMEM;
180
181 pdev->priv = card;
182 card->channels = 0;
183
184 card->base_addr = ioremap(base, EMS_PCMCIA_MEM_SIZE);
185 if (!card->base_addr) {
186 err = -ENOMEM;
187 goto failure_cleanup;
188 }
189
190 /* Check for unique EMS CAN signature */
191 if (readw(card->base_addr) != 0xAA55) {
192 err = -ENODEV;
193 goto failure_cleanup;
194 }
195
196 /* Request board reset */
197 writeb(EMS_CMD_RESET, card->base_addr);
198
199 /* Make sure CAN controllers are mapped into card's memory space */
200 writeb(EMS_CMD_MAP, card->base_addr);
201
202 /* Detect available channels */
203 for (i = 0; i < EMS_PCMCIA_MAX_CHAN; i++) {
204 dev = alloc_sja1000dev(0);
205 if (!dev) {
206 err = -ENOMEM;
207 goto failure_cleanup;
208 }
209
210 card->net_dev[i] = dev;
211 priv = netdev_priv(dev);
212 priv->priv = card;
213 SET_NETDEV_DEV(dev, &pdev->dev);
214 dev->dev_id = i;
215
216 priv->irq_flags = IRQF_SHARED;
217 dev->irq = pdev->irq;
218 priv->reg_base = card->base_addr + EMS_PCMCIA_CAN_BASE_OFFSET +
219 (i * EMS_PCMCIA_CAN_CTRL_SIZE);
220
221 /* Check if channel is present */
222 if (ems_pcmcia_check_chan(priv)) {
223 priv->read_reg = ems_pcmcia_read_reg;
224 priv->write_reg = ems_pcmcia_write_reg;
225 priv->can.clock.freq = EMS_PCMCIA_CAN_CLOCK;
226 priv->ocr = EMS_PCMCIA_OCR;
227 priv->cdr = EMS_PCMCIA_CDR;
228 priv->flags |= SJA1000_CUSTOM_IRQ_HANDLER;
229
230 /* Register SJA1000 device */
231 err = register_sja1000dev(dev);
232 if (err) {
233 free_sja1000dev(dev);
234 goto failure_cleanup;
235 }
236
237 card->channels++;
238
239 printk(KERN_INFO "%s: registered %s on channel "
240 "#%d at 0x%p, irq %d\n", DRV_NAME, dev->name,
241 i, priv->reg_base, dev->irq);
242 } else
243 free_sja1000dev(dev);
244 }
245
246 err = request_irq(dev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
247 DRV_NAME, card);
248 if (!err)
249 return 0;
250
251failure_cleanup:
252 ems_pcmcia_del_card(pdev);
253 return err;
254}
255
256/*
257 * Setup PCMCIA socket and probe for EMS CPC-CARD
258 */
259static int ems_pcmcia_probe(struct pcmcia_device *dev)
260{
261 int csval;
262
263 /* General socket configuration */
264 dev->config_flags |= CONF_ENABLE_IRQ;
265 dev->config_index = 1;
266 dev->config_regs = PRESENT_OPTION;
267
268 /* The io structure describes IO port mapping */
269 dev->resource[0]->end = 16;
270 dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
271 dev->resource[1]->end = 16;
272 dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
273 dev->io_lines = 5;
274
275 /* Allocate a memory window */
276 dev->resource[2]->flags =
277 (WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE);
278 dev->resource[2]->start = dev->resource[2]->end = 0;
279
280 csval = pcmcia_request_window(dev, dev->resource[2], 0);
281 if (csval) {
282 dev_err(&dev->dev, "pcmcia_request_window failed (err=%d)\n",
283 csval);
284 return 0;
285 }
286
287 csval = pcmcia_map_mem_page(dev, dev->resource[2], dev->config_base);
288 if (csval) {
289 dev_err(&dev->dev, "pcmcia_map_mem_page failed (err=%d)\n",
290 csval);
291 return 0;
292 }
293
294 csval = pcmcia_enable_device(dev);
295 if (csval) {
296 dev_err(&dev->dev, "pcmcia_enable_device failed (err=%d)\n",
297 csval);
298 return 0;
299 }
300
301 ems_pcmcia_add_card(dev, dev->resource[2]->start);
302 return 0;
303}
304
305/*
306 * Release claimed resources
307 */
308static void ems_pcmcia_remove(struct pcmcia_device *dev)
309{
310 ems_pcmcia_del_card(dev);
311 pcmcia_disable_device(dev);
312}
313
314static struct pcmcia_driver ems_pcmcia_driver = {
315 .name = DRV_NAME,
316 .probe = ems_pcmcia_probe,
317 .remove = ems_pcmcia_remove,
318 .id_table = ems_pcmcia_tbl,
319};
320module_pcmcia_driver(ems_pcmcia_driver);