Loading...
1#
2# Arcnet configuration
3#
4
5menuconfig ARCNET
6 depends on NETDEVICES && (ISA || PCI || PCMCIA)
7 tristate "ARCnet support"
8 ---help---
9 If you have a network card of this type, say Y and check out the
10 (arguably) beautiful poetry in
11 <file:Documentation/networking/arcnet.txt>.
12
13 You need both this driver, and the driver for the particular ARCnet
14 chipset of your card. If you don't know, then it's probably a
15 COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
16 support" below.
17
18 To compile this driver as a module, choose M here. The module will
19 be called arcnet.
20
21if ARCNET
22
23config ARCNET_1201
24 tristate "Enable standard ARCNet packet format (RFC 1201)"
25 help
26 This allows you to use RFC1201 with your ARCnet card via the virtual
27 arc0 device. You need to say Y here to communicate with
28 industry-standard RFC1201 implementations, like the arcether.com
29 packet driver or most DOS/Windows ODI drivers. Please read the
30 ARCnet documentation in <file:Documentation/networking/arcnet.txt>
31 for more information about using arc0.
32
33config ARCNET_1051
34 tristate "Enable old ARCNet packet format (RFC 1051)"
35 ---help---
36 This allows you to use RFC1051 with your ARCnet card via the virtual
37 arc0s device. You only need arc0s if you want to talk to ARCnet
38 software complying with the "old" standard, specifically, the DOS
39 arcnet.com packet driver, Amigas running AmiTCP, and some variants
40 of NetBSD. You do not need to say Y here to communicate with
41 industry-standard RFC1201 implementations, like the arcether.com
42 packet driver or most DOS/Windows ODI drivers. RFC1201 is included
43 automatically as the arc0 device. Please read the ARCnet
44 documentation in <file:Documentation/networking/arcnet.txt> for more
45 information about using arc0e and arc0s.
46
47config ARCNET_RAW
48 tristate "Enable raw mode packet interface"
49 help
50 ARCnet "raw mode" packet encapsulation, no soft headers. Unlikely
51 to work unless talking to a copy of the same Linux arcnet driver,
52 but perhaps marginally faster in that case.
53
54config ARCNET_CAP
55 tristate "Enable CAP mode packet interface"
56 help
57 ARCnet "cap mode" packet encapsulation. Used to get the hardware
58 acknowledge back to userspace. After the initial protocol byte every
59 packet is stuffed with an extra 4 byte "cookie" which doesn't
60 actually appear on the network. After transmit the driver will send
61 back a packet with protocol byte 0 containing the status of the
62 transmission:
63 0=no hardware acknowledge
64 1=excessive nak
65 2=transmission accepted by the receiver hardware
66
67 Received packets are also stuffed with the extra 4 bytes but it will
68 be random data.
69
70 Cap only listens to protocol 1-8.
71
72config ARCNET_COM90xx
73 tristate "ARCnet COM90xx (normal) chipset driver"
74 help
75 This is the chipset driver for the standard COM90xx cards. If you
76 have always used the old ARCnet driver without knowing what type of
77 card you had, this is probably the one for you.
78
79 To compile this driver as a module, choose M here. The module will
80 be called com90xx.
81
82config ARCNET_COM90xxIO
83 tristate "ARCnet COM90xx (IO mapped) chipset driver"
84 ---help---
85 This is the chipset driver for the COM90xx cards, using them in
86 IO-mapped mode instead of memory-mapped mode. This is slower than
87 the normal driver. Only use it if your card doesn't support shared
88 memory.
89
90 To compile this driver as a module, choose M here. The module will
91 be called com90io.
92
93config ARCNET_RIM_I
94 tristate "ARCnet COM90xx (RIM I) chipset driver"
95 ---help---
96 This is yet another chipset driver for the COM90xx cards, but this
97 time only using memory-mapped mode, and no IO ports at all. This
98 driver is completely untested, so if you have one of these cards,
99 please mail <dwmw2@infradead.org>, especially if it works!
100
101 To compile this driver as a module, choose M here. The module will
102 be called arc-rimi.
103
104config ARCNET_COM20020
105 tristate "ARCnet COM20020 chipset driver"
106 depends on LEDS_CLASS
107 help
108 This is the driver for the new COM20020 chipset. It supports such
109 things as promiscuous mode, so packet sniffing is possible, and
110 extra diagnostic information.
111
112 To compile this driver as a module, choose M here. The module will
113 be called com20020.
114
115config ARCNET_COM20020_ISA
116 tristate "Support for COM20020 on ISA"
117 depends on ARCNET_COM20020 && ISA
118
119config ARCNET_COM20020_PCI
120 tristate "Support for COM20020 on PCI"
121 depends on ARCNET_COM20020 && PCI
122
123config ARCNET_COM20020_CS
124 tristate "COM20020 ARCnet PCMCIA support"
125 depends on ARCNET_COM20020 && PCMCIA
126 help
127 Say Y here if you intend to attach this type of ARCnet PCMCIA card
128 to your computer.
129
130 To compile this driver as a module, choose M here: the module will be
131 called com20020_cs. If unsure, say N.
132
133endif # ARCNET
1#
2# Arcnet configuration
3#
4
5menuconfig ARCNET
6 depends on NETDEVICES && (ISA || PCI || PCMCIA)
7 tristate "ARCnet support"
8 ---help---
9 If you have a network card of this type, say Y and check out the
10 (arguably) beautiful poetry in
11 <file:Documentation/networking/arcnet.txt>.
12
13 You need both this driver, and the driver for the particular ARCnet
14 chipset of your card. If you don't know, then it's probably a
15 COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
16 support" below.
17
18 You might also want to have a look at the Ethernet-HOWTO, available
19 from <http://www.tldp.org/docs.html#howto>(even though ARCnet
20 is not really Ethernet).
21
22 To compile this driver as a module, choose M here. The module will
23 be called arcnet.
24
25if ARCNET
26
27config ARCNET_1201
28 tristate "Enable standard ARCNet packet format (RFC 1201)"
29 help
30 This allows you to use RFC1201 with your ARCnet card via the virtual
31 arc0 device. You need to say Y here to communicate with
32 industry-standard RFC1201 implementations, like the arcether.com
33 packet driver or most DOS/Windows ODI drivers. Please read the
34 ARCnet documentation in <file:Documentation/networking/arcnet.txt>
35 for more information about using arc0.
36
37config ARCNET_1051
38 tristate "Enable old ARCNet packet format (RFC 1051)"
39 ---help---
40 This allows you to use RFC1051 with your ARCnet card via the virtual
41 arc0s device. You only need arc0s if you want to talk to ARCnet
42 software complying with the "old" standard, specifically, the DOS
43 arcnet.com packet driver, Amigas running AmiTCP, and some variants
44 of NetBSD. You do not need to say Y here to communicate with
45 industry-standard RFC1201 implementations, like the arcether.com
46 packet driver or most DOS/Windows ODI drivers. RFC1201 is included
47 automatically as the arc0 device. Please read the ARCnet
48 documentation in <file:Documentation/networking/arcnet.txt> for more
49 information about using arc0e and arc0s.
50
51config ARCNET_RAW
52 tristate "Enable raw mode packet interface"
53 help
54 ARCnet "raw mode" packet encapsulation, no soft headers. Unlikely
55 to work unless talking to a copy of the same Linux arcnet driver,
56 but perhaps marginally faster in that case.
57
58config ARCNET_CAP
59 tristate "Enable CAP mode packet interface"
60 help
61 ARCnet "cap mode" packet encapsulation. Used to get the hardware
62 acknowledge back to userspace. After the initial protocol byte every
63 packet is stuffed with an extra 4 byte "cookie" which doesn't
64 actually appear on the network. After transmit the driver will send
65 back a packet with protocol byte 0 containing the status of the
66 transmission:
67 0=no hardware acknowledge
68 1=excessive nak
69 2=transmission accepted by the receiver hardware
70
71 Received packets are also stuffed with the extra 4 bytes but it will
72 be random data.
73
74 Cap only listens to protocol 1-8.
75
76config ARCNET_COM90xx
77 tristate "ARCnet COM90xx (normal) chipset driver"
78 help
79 This is the chipset driver for the standard COM90xx cards. If you
80 have always used the old ARCnet driver without knowing what type of
81 card you had, this is probably the one for you.
82
83 To compile this driver as a module, choose M here. The module will
84 be called com90xx.
85
86config ARCNET_COM90xxIO
87 tristate "ARCnet COM90xx (IO mapped) chipset driver"
88 ---help---
89 This is the chipset driver for the COM90xx cards, using them in
90 IO-mapped mode instead of memory-mapped mode. This is slower than
91 the normal driver. Only use it if your card doesn't support shared
92 memory.
93
94 To compile this driver as a module, choose M here. The module will
95 be called com90io.
96
97config ARCNET_RIM_I
98 tristate "ARCnet COM90xx (RIM I) chipset driver"
99 ---help---
100 This is yet another chipset driver for the COM90xx cards, but this
101 time only using memory-mapped mode, and no IO ports at all. This
102 driver is completely untested, so if you have one of these cards,
103 please mail <dwmw2@infradead.org>, especially if it works!
104
105 To compile this driver as a module, choose M here. The module will
106 be called arc-rimi.
107
108config ARCNET_COM20020
109 tristate "ARCnet COM20020 chipset driver"
110 help
111 This is the driver for the new COM20020 chipset. It supports such
112 things as promiscuous mode, so packet sniffing is possible, and
113 extra diagnostic information.
114
115 To compile this driver as a module, choose M here. The module will
116 be called com20020.
117
118config ARCNET_COM20020_ISA
119 tristate "Support for COM20020 on ISA"
120 depends on ARCNET_COM20020 && ISA
121
122config ARCNET_COM20020_PCI
123 tristate "Support for COM20020 on PCI"
124 depends on ARCNET_COM20020 && PCI
125
126config ARCNET_COM20020_CS
127 tristate "COM20020 ARCnet PCMCIA support"
128 depends on ARCNET_COM20020 && PCMCIA
129 help
130 Say Y here if you intend to attach this type of ARCnet PCMCIA card
131 to your computer.
132
133 To compile this driver as a module, choose M here: the module will be
134 called com20020_cs. If unsure, say N.
135
136endif # ARCNET