Loading...
1/*
2 * PMC-Sierra MSP board specific pci_ops
3 *
4 * Copyright 2001 MontaVista Software Inc.
5 * Copyright 2005-2007 PMC-Sierra, Inc
6 *
7 * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
8 *
9 * Much of the code is derived from the original DDB5074 port by
10 * Geert Uytterhoeven <geert@linux-m68k.org>
11 *
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
16 *
17 */
18
19#define PCI_COUNTERS 1
20
21#include <linux/types.h>
22#include <linux/pci.h>
23#include <linux/interrupt.h>
24
25#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
26#include <linux/proc_fs.h>
27#include <linux/seq_file.h>
28#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
29
30#include <linux/kernel.h>
31#include <linux/init.h>
32
33#include <asm/byteorder.h>
34#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
35#include <asm/mipsmtregs.h>
36#endif
37
38#include <msp_prom.h>
39#include <msp_cic_int.h>
40#include <msp_pci.h>
41#include <msp_regs.h>
42#include <msp_regops.h>
43
44#define PCI_ACCESS_READ 0
45#define PCI_ACCESS_WRITE 1
46
47#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
48static char proc_init;
49extern struct proc_dir_entry *proc_bus_pci_dir;
50unsigned int pci_int_count[32];
51
52static void pci_proc_init(void);
53
54/*****************************************************************************
55 *
56 * FUNCTION: show_msp_pci_counts
57 * _________________________________________________________________________
58 *
59 * DESCRIPTION: Prints the count of how many times each PCI
60 * interrupt has asserted. Can be invoked by the
61 * /proc filesystem.
62 *
63 * INPUTS: m - synthetic file construction data
64 * v - iterator
65 *
66 * RETURNS: 0 or error
67 *
68 ****************************************************************************/
69static int show_msp_pci_counts(struct seq_file *m, void *v)
70{
71 int i;
72 unsigned int intcount, total = 0;
73
74 for (i = 0; i < 32; ++i) {
75 intcount = pci_int_count[i];
76 if (intcount != 0) {
77 seq_printf(m, "[%d] = %u\n", i, intcount);
78 total += intcount;
79 }
80 }
81
82 seq_printf(m, "total = %u\n", total);
83 return 0;
84}
85
86static int msp_pci_rd_cnt_open(struct inode *inode, struct file *file)
87{
88 return single_open(file, show_msp_pci_counts, NULL);
89}
90
91static const struct file_operations msp_pci_rd_cnt_fops = {
92 .open = msp_pci_rd_cnt_open,
93 .read = seq_read,
94 .llseek = seq_lseek,
95 .release = single_release,
96};
97
98/*****************************************************************************
99 *
100 * FUNCTION: gen_pci_cfg_wr_show
101 * _________________________________________________________________________
102 *
103 * DESCRIPTION: Generates a configuration write cycle for debug purposes.
104 * The IDSEL line asserted and location and data written are
105 * immaterial. Just want to be able to prove that a
106 * configuration write can be correctly generated on the
107 * PCI bus. Intent is that this function by invocable from
108 * the /proc filesystem.
109 *
110 * INPUTS: m - synthetic file construction data
111 * v - iterator
112 *
113 * RETURNS: 0 or error
114 *
115 ****************************************************************************/
116static int gen_pci_cfg_wr_show(struct seq_file *m, void *v)
117{
118 unsigned char where = 0; /* Write to static Device/Vendor ID */
119 unsigned char bus_num = 0; /* Bus 0 */
120 unsigned char dev_fn = 0xF; /* Arbitrary device number */
121 u32 wr_data = 0xFF00AA00; /* Arbitrary data */
122 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
123 unsigned long value;
124 int intr;
125
126 seq_puts(m, "PMC MSP PCI: Beginning\n");
127
128 if (proc_init == 0) {
129 pci_proc_init();
130 proc_init = ~0;
131 }
132
133 seq_puts(m, "PMC MSP PCI: Before Cfg Wr\n");
134
135 /*
136 * Generate PCI Configuration Write Cycle
137 */
138
139 /* Clear cause register bits */
140 preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
141
142 /* Setup address that is to appear on PCI bus */
143 preg->config_addr = BPCI_CFGADDR_ENABLE |
144 (bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
145 (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
146 (where & 0xFC);
147
148 value = cpu_to_le32(wr_data);
149
150 /* Launch the PCI configuration write cycle */
151 *PCI_CONFIG_SPACE_REG = value;
152
153 /*
154 * Check if the PCI configuration cycle (rd or wr) succeeded, by
155 * checking the status bits for errors like master or target abort.
156 */
157 intr = preg->if_status;
158
159 seq_puts(m, "PMC MSP PCI: After Cfg Wr\n");
160 return 0;
161}
162
163static int gen_pci_cfg_wr_open(struct inode *inode, struct file *file)
164{
165 return single_open(file, gen_pci_cfg_wr_show, NULL);
166}
167
168static const struct file_operations gen_pci_cfg_wr_fops = {
169 .open = gen_pci_cfg_wr_open,
170 .read = seq_read,
171 .llseek = seq_lseek,
172 .release = single_release,
173};
174
175/*****************************************************************************
176 *
177 * FUNCTION: pci_proc_init
178 * _________________________________________________________________________
179 *
180 * DESCRIPTION: Create entries in the /proc filesystem for debug access.
181 *
182 * INPUTS: none
183 *
184 * OUTPUTS: none
185 *
186 * RETURNS: none
187 *
188 ****************************************************************************/
189static void pci_proc_init(void)
190{
191 proc_create("pmc_msp_pci_rd_cnt", 0, NULL, &msp_pci_rd_cnt_fops);
192 proc_create("pmc_msp_pci_cfg_wr", 0, NULL, &gen_pci_cfg_wr_fops);
193}
194#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
195
196/*****************************************************************************
197 *
198 * STRUCT: pci_io_resource
199 * _________________________________________________________________________
200 *
201 * DESCRIPTION: Defines the address range that pciauto() will use to
202 * assign to the I/O BARs of PCI devices.
203 *
204 * Use the start and end addresses of the MSP7120 PCI Host
205 * Controller I/O space, in the form that they appear on the
206 * PCI bus AFTER MSP7120 has performed address translation.
207 *
208 * For I/O accesses, MSP7120 ignores OATRAN and maps I/O
209 * accesses into the bottom 0xFFF region of address space,
210 * so that is the range to put into the pci_io_resource
211 * struct.
212 *
213 * In MSP4200, the start address was 0x04 instead of the
214 * expected 0x00. Will just assume there was a good reason
215 * for this!
216 *
217 * NOTES: Linux, by default, will assign I/O space to the lowest
218 * region of address space. Since MSP7120 and Linux,
219 * by default, have no offset in between how they map, the
220 * io_offset element of pci_controller struct should be set
221 * to zero.
222 * ELEMENTS:
223 * name - String used for a meaningful name.
224 *
225 * start - Start address of MSP7120's I/O space, as MSP7120 presents
226 * the address on the PCI bus.
227 *
228 * end - End address of MSP7120's I/O space, as MSP7120 presents
229 * the address on the PCI bus.
230 *
231 * flags - Attributes indicating the type of resource. In this case,
232 * indicate I/O space.
233 *
234 ****************************************************************************/
235static struct resource pci_io_resource = {
236 .name = "pci IO space",
237 .start = 0x04,
238 .end = 0x0FFF,
239 .flags = IORESOURCE_IO /* I/O space */
240};
241
242/*****************************************************************************
243 *
244 * STRUCT: pci_mem_resource
245 * _________________________________________________________________________
246 *
247 * DESCRIPTION: Defines the address range that pciauto() will use to
248 * assign to the memory BARs of PCI devices.
249 *
250 * The .start and .end values are dependent upon how address
251 * translation is performed by the OATRAN regiser.
252 *
253 * The values to use for .start and .end are the values
254 * in the form they appear on the PCI bus AFTER MSP7120 has
255 * performed OATRAN address translation.
256 *
257 * ELEMENTS:
258 * name - String used for a meaningful name.
259 *
260 * start - Start address of MSP7120's memory space, as MSP7120 presents
261 * the address on the PCI bus.
262 *
263 * end - End address of MSP7120's memory space, as MSP7120 presents
264 * the address on the PCI bus.
265 *
266 * flags - Attributes indicating the type of resource. In this case,
267 * indicate memory space.
268 *
269 ****************************************************************************/
270static struct resource pci_mem_resource = {
271 .name = "pci memory space",
272 .start = MSP_PCI_SPACE_BASE,
273 .end = MSP_PCI_SPACE_END,
274 .flags = IORESOURCE_MEM /* memory space */
275};
276
277/*****************************************************************************
278 *
279 * FUNCTION: bpci_interrupt
280 * _________________________________________________________________________
281 *
282 * DESCRIPTION: PCI status interrupt handler. Updates the count of how
283 * many times each status bit has been set, then clears
284 * the status bits. If the appropriate macros are defined,
285 * these counts can be viewed via the /proc filesystem.
286 *
287 * INPUTS: irq - unused
288 * dev_id - unused
289 * pt_regs - unused
290 *
291 * OUTPUTS: none
292 *
293 * RETURNS: PCIBIOS_SUCCESSFUL - success
294 *
295 ****************************************************************************/
296static irqreturn_t bpci_interrupt(int irq, void *dev_id)
297{
298 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
299 unsigned int stat = preg->if_status;
300
301#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
302 int i;
303 for (i = 0; i < 32; ++i) {
304 if ((1 << i) & stat)
305 ++pci_int_count[i];
306 }
307#endif /* PROC_FS && PCI_COUNTERS */
308
309 /* printk("PCI ISR: Status=%08X\n", stat); */
310
311 /* write to clear all asserted interrupts */
312 preg->if_status = stat;
313
314 return IRQ_HANDLED;
315}
316
317/*****************************************************************************
318 *
319 * FUNCTION: msp_pcibios_config_access
320 * _________________________________________________________________________
321 *
322 * DESCRIPTION: Performs a PCI configuration access (rd or wr), then
323 * checks that the access succeeded by querying MSP7120's
324 * PCI status bits.
325 *
326 * INPUTS:
327 * access_type - kind of PCI configuration cycle to perform
328 * (read or write). Legal values are
329 * PCI_ACCESS_WRITE and PCI_ACCESS_READ.
330 *
331 * bus - pointer to the bus number of the device to
332 * be targeted for the configuration cycle.
333 * The only element of the pci_bus structure
334 * used is bus->number. This argument determines
335 * if the configuration access will be Type 0 or
336 * Type 1. Since MSP7120 assumes itself to be the
337 * PCI Host, any non-zero bus->number generates
338 * a Type 1 access.
339 *
340 * devfn - this is an 8-bit field. The lower three bits
341 * specify the function number of the device to
342 * be targeted for the configuration cycle, with
343 * all three-bit combinations being legal. The
344 * upper five bits specify the device number,
345 * with legal values being 10 to 31.
346 *
347 * where - address within the Configuration Header
348 * space to access.
349 *
350 * data - for write accesses, contains the data to
351 * write.
352 *
353 * OUTPUTS:
354 * data - for read accesses, contains the value read.
355 *
356 * RETURNS: PCIBIOS_SUCCESSFUL - success
357 * -1 - access failure
358 *
359 ****************************************************************************/
360int msp_pcibios_config_access(unsigned char access_type,
361 struct pci_bus *bus,
362 unsigned int devfn,
363 unsigned char where,
364 u32 *data)
365{
366 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
367 unsigned char bus_num = bus->number;
368 unsigned char dev_fn = (unsigned char)devfn;
369 unsigned long intr;
370 unsigned long value;
371 static char pciirqflag;
372 int ret;
373#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
374 unsigned int vpe_status;
375#endif
376
377#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
378 if (proc_init == 0) {
379 pci_proc_init();
380 proc_init = ~0;
381 }
382#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
383
384 /*
385 * Just the first time this function invokes, allocate
386 * an interrupt line for PCI host status interrupts. The
387 * allocation assigns an interrupt handler to the interrupt.
388 */
389 if (pciirqflag == 0) {
390 ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
391 bpci_interrupt,
392 IRQF_SHARED,
393 "PMC MSP PCI Host",
394 preg);
395 if (ret != 0)
396 return ret;
397 pciirqflag = ~0;
398 }
399
400#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
401 vpe_status = dvpe();
402#endif
403
404 /*
405 * Clear PCI cause register bits.
406 *
407 * In Polo, the PCI Host had a dedicated DMA called the
408 * Block Copy (not to be confused with the general purpose Block
409 * Copy Engine block). There appear to have been special interrupts
410 * for this Block Copy, called Block Copy 0 Fault (BC0F) and
411 * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this
412 * dedicated Block Copy block, so these two interrupts are now
413 * marked reserved. In case the Block Copy is resurrected in a
414 * future design, maintain the code that treats these two interrupts
415 * specially.
416 *
417 * Write to clear all interrupts in the PCI status register, aside
418 * from BC0F and BC1F.
419 */
420 preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
421
422 /* Setup address that is to appear on PCI bus */
423 preg->config_addr = BPCI_CFGADDR_ENABLE |
424 (bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
425 (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
426 (where & 0xFC);
427
428 /* IF access is a PCI configuration write */
429 if (access_type == PCI_ACCESS_WRITE) {
430 value = cpu_to_le32(*data);
431 *PCI_CONFIG_SPACE_REG = value;
432 } else {
433 /* ELSE access is a PCI configuration read */
434 value = le32_to_cpu(*PCI_CONFIG_SPACE_REG);
435 *data = value;
436 }
437
438 /*
439 * Check if the PCI configuration cycle (rd or wr) succeeded, by
440 * checking the status bits for errors like master or target abort.
441 */
442 intr = preg->if_status;
443
444 /* Clear config access */
445 preg->config_addr = 0;
446
447 /* IF error occurred */
448 if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) {
449 /* Clear status bits */
450 preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
451
452#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
453 evpe(vpe_status);
454#endif
455
456 return -1;
457 }
458
459#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
460 evpe(vpe_status);
461#endif
462
463 return PCIBIOS_SUCCESSFUL;
464}
465
466/*****************************************************************************
467 *
468 * FUNCTION: msp_pcibios_read_config_byte
469 * _________________________________________________________________________
470 *
471 * DESCRIPTION: Read a byte from PCI configuration address spac
472 * Since the hardware can't address 8 bit chunks
473 * directly, read a 32-bit chunk, then mask off extraneous
474 * bits.
475 *
476 * INPUTS bus - structure containing attributes for the PCI bus
477 * that the read is destined for.
478 * devfn - device/function combination that the read is
479 * destined for.
480 * where - register within the Configuration Header space
481 * to access.
482 *
483 * OUTPUTS val - read data
484 *
485 * RETURNS: PCIBIOS_SUCCESSFUL - success
486 * -1 - read access failure
487 *
488 ****************************************************************************/
489static int
490msp_pcibios_read_config_byte(struct pci_bus *bus,
491 unsigned int devfn,
492 int where,
493 u32 *val)
494{
495 u32 data = 0;
496
497 /*
498 * If the config access did not complete normally (e.g., underwent
499 * master abort) do the PCI compliant thing, which is to supply an
500 * all ones value.
501 */
502 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
503 where, &data)) {
504 *val = 0xFFFFFFFF;
505 return -1;
506 }
507
508 *val = (data >> ((where & 3) << 3)) & 0x0ff;
509
510 return PCIBIOS_SUCCESSFUL;
511}
512
513/*****************************************************************************
514 *
515 * FUNCTION: msp_pcibios_read_config_word
516 * _________________________________________________________________________
517 *
518 * DESCRIPTION: Read a word (16 bits) from PCI configuration address space.
519 * Since the hardware can't address 16 bit chunks
520 * directly, read a 32-bit chunk, then mask off extraneous
521 * bits.
522 *
523 * INPUTS bus - structure containing attributes for the PCI bus
524 * that the read is destined for.
525 * devfn - device/function combination that the read is
526 * destined for.
527 * where - register within the Configuration Header space
528 * to access.
529 *
530 * OUTPUTS val - read data
531 *
532 * RETURNS: PCIBIOS_SUCCESSFUL - success
533 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
534 * -1 - read access failure
535 *
536 ****************************************************************************/
537static int
538msp_pcibios_read_config_word(struct pci_bus *bus,
539 unsigned int devfn,
540 int where,
541 u32 *val)
542{
543 u32 data = 0;
544
545 /* if (where & 1) */ /* Commented out non-compliant code.
546 * Should allow word access to configuration
547 * registers, with only exception being when
548 * the word access would wrap around into
549 * the next dword.
550 */
551 if ((where & 3) == 3) {
552 *val = 0xFFFFFFFF;
553 return PCIBIOS_BAD_REGISTER_NUMBER;
554 }
555
556 /*
557 * If the config access did not complete normally (e.g., underwent
558 * master abort) do the PCI compliant thing, which is to supply an
559 * all ones value.
560 */
561 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
562 where, &data)) {
563 *val = 0xFFFFFFFF;
564 return -1;
565 }
566
567 *val = (data >> ((where & 3) << 3)) & 0x0ffff;
568
569 return PCIBIOS_SUCCESSFUL;
570}
571
572/*****************************************************************************
573 *
574 * FUNCTION: msp_pcibios_read_config_dword
575 * _________________________________________________________________________
576 *
577 * DESCRIPTION: Read a double word (32 bits) from PCI configuration
578 * address space.
579 *
580 * INPUTS bus - structure containing attributes for the PCI bus
581 * that the read is destined for.
582 * devfn - device/function combination that the read is
583 * destined for.
584 * where - register within the Configuration Header space
585 * to access.
586 *
587 * OUTPUTS val - read data
588 *
589 * RETURNS: PCIBIOS_SUCCESSFUL - success
590 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
591 * -1 - read access failure
592 *
593 ****************************************************************************/
594static int
595msp_pcibios_read_config_dword(struct pci_bus *bus,
596 unsigned int devfn,
597 int where,
598 u32 *val)
599{
600 u32 data = 0;
601
602 /* Address must be dword aligned. */
603 if (where & 3) {
604 *val = 0xFFFFFFFF;
605 return PCIBIOS_BAD_REGISTER_NUMBER;
606 }
607
608 /*
609 * If the config access did not complete normally (e.g., underwent
610 * master abort) do the PCI compliant thing, which is to supply an
611 * all ones value.
612 */
613 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
614 where, &data)) {
615 *val = 0xFFFFFFFF;
616 return -1;
617 }
618
619 *val = data;
620
621 return PCIBIOS_SUCCESSFUL;
622}
623
624/*****************************************************************************
625 *
626 * FUNCTION: msp_pcibios_write_config_byte
627 * _________________________________________________________________________
628 *
629 * DESCRIPTION: Write a byte to PCI configuration address space.
630 * Since the hardware can't address 8 bit chunks
631 * directly, a read-modify-write is performed.
632 *
633 * INPUTS bus - structure containing attributes for the PCI bus
634 * that the write is destined for.
635 * devfn - device/function combination that the write is
636 * destined for.
637 * where - register within the Configuration Header space
638 * to access.
639 * val - value to write
640 *
641 * OUTPUTS none
642 *
643 * RETURNS: PCIBIOS_SUCCESSFUL - success
644 * -1 - write access failure
645 *
646 ****************************************************************************/
647static int
648msp_pcibios_write_config_byte(struct pci_bus *bus,
649 unsigned int devfn,
650 int where,
651 u8 val)
652{
653 u32 data = 0;
654
655 /* read config space */
656 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
657 where, &data))
658 return -1;
659
660 /* modify the byte within the dword */
661 data = (data & ~(0xff << ((where & 3) << 3))) |
662 (val << ((where & 3) << 3));
663
664 /* write back the full dword */
665 if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
666 where, &data))
667 return -1;
668
669 return PCIBIOS_SUCCESSFUL;
670}
671
672/*****************************************************************************
673 *
674 * FUNCTION: msp_pcibios_write_config_word
675 * _________________________________________________________________________
676 *
677 * DESCRIPTION: Write a word (16-bits) to PCI configuration address space.
678 * Since the hardware can't address 16 bit chunks
679 * directly, a read-modify-write is performed.
680 *
681 * INPUTS bus - structure containing attributes for the PCI bus
682 * that the write is destined for.
683 * devfn - device/function combination that the write is
684 * destined for.
685 * where - register within the Configuration Header space
686 * to access.
687 * val - value to write
688 *
689 * OUTPUTS none
690 *
691 * RETURNS: PCIBIOS_SUCCESSFUL - success
692 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
693 * -1 - write access failure
694 *
695 ****************************************************************************/
696static int
697msp_pcibios_write_config_word(struct pci_bus *bus,
698 unsigned int devfn,
699 int where,
700 u16 val)
701{
702 u32 data = 0;
703
704 /* Fixed non-compliance: if (where & 1) */
705 if ((where & 3) == 3)
706 return PCIBIOS_BAD_REGISTER_NUMBER;
707
708 /* read config space */
709 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
710 where, &data))
711 return -1;
712
713 /* modify the word within the dword */
714 data = (data & ~(0xffff << ((where & 3) << 3))) |
715 (val << ((where & 3) << 3));
716
717 /* write back the full dword */
718 if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
719 where, &data))
720 return -1;
721
722 return PCIBIOS_SUCCESSFUL;
723}
724
725/*****************************************************************************
726 *
727 * FUNCTION: msp_pcibios_write_config_dword
728 * _________________________________________________________________________
729 *
730 * DESCRIPTION: Write a double word (32-bits) to PCI configuration address
731 * space.
732 *
733 * INPUTS bus - structure containing attributes for the PCI bus
734 * that the write is destined for.
735 * devfn - device/function combination that the write is
736 * destined for.
737 * where - register within the Configuration Header space
738 * to access.
739 * val - value to write
740 *
741 * OUTPUTS none
742 *
743 * RETURNS: PCIBIOS_SUCCESSFUL - success
744 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
745 * -1 - write access failure
746 *
747 ****************************************************************************/
748static int
749msp_pcibios_write_config_dword(struct pci_bus *bus,
750 unsigned int devfn,
751 int where,
752 u32 val)
753{
754 /* check that address is dword aligned */
755 if (where & 3)
756 return PCIBIOS_BAD_REGISTER_NUMBER;
757
758 /* perform write */
759 if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
760 where, &val))
761 return -1;
762
763 return PCIBIOS_SUCCESSFUL;
764}
765
766/*****************************************************************************
767 *
768 * FUNCTION: msp_pcibios_read_config
769 * _________________________________________________________________________
770 *
771 * DESCRIPTION: Interface the PCI configuration read request with
772 * the appropriate function, based on how many bytes
773 * the read request is.
774 *
775 * INPUTS bus - structure containing attributes for the PCI bus
776 * that the write is destined for.
777 * devfn - device/function combination that the write is
778 * destined for.
779 * where - register within the Configuration Header space
780 * to access.
781 * size - in units of bytes, should be 1, 2, or 4.
782 *
783 * OUTPUTS val - value read, with any extraneous bytes masked
784 * to zero.
785 *
786 * RETURNS: PCIBIOS_SUCCESSFUL - success
787 * -1 - failure
788 *
789 ****************************************************************************/
790int
791msp_pcibios_read_config(struct pci_bus *bus,
792 unsigned int devfn,
793 int where,
794 int size,
795 u32 *val)
796{
797 if (size == 1) {
798 if (msp_pcibios_read_config_byte(bus, devfn, where, val)) {
799 return -1;
800 }
801 } else if (size == 2) {
802 if (msp_pcibios_read_config_word(bus, devfn, where, val)) {
803 return -1;
804 }
805 } else if (size == 4) {
806 if (msp_pcibios_read_config_dword(bus, devfn, where, val)) {
807 return -1;
808 }
809 } else {
810 *val = 0xFFFFFFFF;
811 return -1;
812 }
813
814 return PCIBIOS_SUCCESSFUL;
815}
816
817/*****************************************************************************
818 *
819 * FUNCTION: msp_pcibios_write_config
820 * _________________________________________________________________________
821 *
822 * DESCRIPTION: Interface the PCI configuration write request with
823 * the appropriate function, based on how many bytes
824 * the read request is.
825 *
826 * INPUTS bus - structure containing attributes for the PCI bus
827 * that the write is destined for.
828 * devfn - device/function combination that the write is
829 * destined for.
830 * where - register within the Configuration Header space
831 * to access.
832 * size - in units of bytes, should be 1, 2, or 4.
833 * val - value to write
834 *
835 * OUTPUTS: none
836 *
837 * RETURNS: PCIBIOS_SUCCESSFUL - success
838 * -1 - failure
839 *
840 ****************************************************************************/
841int
842msp_pcibios_write_config(struct pci_bus *bus,
843 unsigned int devfn,
844 int where,
845 int size,
846 u32 val)
847{
848 if (size == 1) {
849 if (msp_pcibios_write_config_byte(bus, devfn,
850 where, (u8)(0xFF & val))) {
851 return -1;
852 }
853 } else if (size == 2) {
854 if (msp_pcibios_write_config_word(bus, devfn,
855 where, (u16)(0xFFFF & val))) {
856 return -1;
857 }
858 } else if (size == 4) {
859 if (msp_pcibios_write_config_dword(bus, devfn, where, val)) {
860 return -1;
861 }
862 } else {
863 return -1;
864 }
865
866 return PCIBIOS_SUCCESSFUL;
867}
868
869/*****************************************************************************
870 *
871 * STRUCTURE: msp_pci_ops
872 * _________________________________________________________________________
873 *
874 * DESCRIPTION: structure to abstract the hardware specific PCI
875 * configuration accesses.
876 *
877 * ELEMENTS:
878 * read - function for Linux to generate PCI Configuration reads.
879 * write - function for Linux to generate PCI Configuration writes.
880 *
881 ****************************************************************************/
882struct pci_ops msp_pci_ops = {
883 .read = msp_pcibios_read_config,
884 .write = msp_pcibios_write_config
885};
886
887/*****************************************************************************
888 *
889 * STRUCTURE: msp_pci_controller
890 * _________________________________________________________________________
891 *
892 * Describes the attributes of the MSP7120 PCI Host Controller
893 *
894 * ELEMENTS:
895 * pci_ops - abstracts the hardware specific PCI configuration
896 * accesses.
897 *
898 * mem_resource - address range pciauto() uses to assign to PCI device
899 * memory BARs.
900 *
901 * mem_offset - offset between how MSP7120 outbound PCI memory
902 * transaction addresses appear on the PCI bus and how Linux
903 * wants to configure memory BARs of the PCI devices.
904 * MSP7120 does nothing funky, so just set to zero.
905 *
906 * io_resource - address range pciauto() uses to assign to PCI device
907 * I/O BARs.
908 *
909 * io_offset - offset between how MSP7120 outbound PCI I/O
910 * transaction addresses appear on the PCI bus and how
911 * Linux defaults to configure I/O BARs of the PCI devices.
912 * MSP7120 maps outbound I/O accesses into the bottom
913 * bottom 4K of PCI address space (and ignores OATRAN).
914 * Since the Linux default is to configure I/O BARs to the
915 * bottom 4K, no special offset is needed. Just set to zero.
916 *
917 ****************************************************************************/
918static struct pci_controller msp_pci_controller = {
919 .pci_ops = &msp_pci_ops,
920 .mem_resource = &pci_mem_resource,
921 .mem_offset = 0,
922 .io_map_base = MSP_PCI_IOSPACE_BASE,
923 .io_resource = &pci_io_resource,
924 .io_offset = 0
925};
926
927/*****************************************************************************
928 *
929 * FUNCTION: msp_pci_init
930 * _________________________________________________________________________
931 *
932 * DESCRIPTION: Initialize the PCI Host Controller and register it with
933 * Linux so Linux can seize control of the PCI bus.
934 *
935 ****************************************************************************/
936void __init msp_pci_init(void)
937{
938 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
939 u32 id;
940
941 /* Extract Device ID */
942 id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12;
943
944 /* Check if JTAG ID identifies MSP7120 */
945 if (!MSP_HAS_PCI(id)) {
946 printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id);
947 goto no_pci;
948 }
949
950 /*
951 * Enable flushing of the PCI-SDRAM queue upon a read
952 * of the SDRAM's Memory Configuration Register.
953 */
954 *(unsigned long *)QFLUSH_REG_1 = 3;
955
956 /* Configure PCI Host Controller. */
957 preg->if_status = ~0; /* Clear cause register bits */
958 preg->config_addr = 0; /* Clear config access */
959 preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */
960 preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */
961
962 /* configure so inb(), outb(), and family are functional */
963 set_io_port_base(MSP_PCI_IOSPACE_BASE);
964
965 /* Tell Linux the details of the MSP7120 PCI Host Controller */
966 register_pci_controller(&msp_pci_controller);
967
968 return;
969
970no_pci:
971 /* Disable PCI channel */
972 printk(KERN_WARNING "PCI: no host PCI bus detected\n");
973}
1/*
2 * PMC-Sierra MSP board specific pci_ops
3 *
4 * Copyright 2001 MontaVista Software Inc.
5 * Copyright 2005-2007 PMC-Sierra, Inc
6 *
7 * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
8 *
9 * Much of the code is derived from the original DDB5074 port by
10 * Geert Uytterhoeven <geert@sonycom.com>
11 *
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
16 *
17 */
18
19#define PCI_COUNTERS 1
20
21#include <linux/types.h>
22#include <linux/pci.h>
23#include <linux/interrupt.h>
24
25#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
26#include <linux/proc_fs.h>
27#include <linux/seq_file.h>
28#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
29
30#include <linux/kernel.h>
31#include <linux/init.h>
32
33#include <asm/byteorder.h>
34#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
35#include <asm/mipsmtregs.h>
36#endif
37
38#include <msp_prom.h>
39#include <msp_cic_int.h>
40#include <msp_pci.h>
41#include <msp_regs.h>
42#include <msp_regops.h>
43
44#define PCI_ACCESS_READ 0
45#define PCI_ACCESS_WRITE 1
46
47#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
48static char proc_init;
49extern struct proc_dir_entry *proc_bus_pci_dir;
50unsigned int pci_int_count[32];
51
52static void pci_proc_init(void);
53
54/*****************************************************************************
55 *
56 * FUNCTION: show_msp_pci_counts
57 * _________________________________________________________________________
58 *
59 * DESCRIPTION: Prints the count of how many times each PCI
60 * interrupt has asserted. Can be invoked by the
61 * /proc filesystem.
62 *
63 * INPUTS: m - synthetic file construction data
64 * v - iterator
65 *
66 * RETURNS: 0 or error
67 *
68 ****************************************************************************/
69static int show_msp_pci_counts(struct seq_file *m, void *v)
70{
71 int i;
72 unsigned int intcount, total = 0;
73
74 for (i = 0; i < 32; ++i) {
75 intcount = pci_int_count[i];
76 if (intcount != 0) {
77 seq_printf(m, "[%d] = %u\n", i, intcount);
78 total += intcount;
79 }
80 }
81
82 seq_printf(m, "total = %u\n", total);
83 return 0;
84}
85
86static int msp_pci_rd_cnt_open(struct inode *inode, struct file *file)
87{
88 return single_open(file, show_msp_pci_counts, NULL);
89}
90
91static const struct file_operations msp_pci_rd_cnt_fops = {
92 .open = msp_pci_rd_cnt_open,
93 .read = seq_read,
94 .llseek = seq_lseek,
95 .release = single_release,
96};
97
98/*****************************************************************************
99 *
100 * FUNCTION: gen_pci_cfg_wr_show
101 * _________________________________________________________________________
102 *
103 * DESCRIPTION: Generates a configuration write cycle for debug purposes.
104 * The IDSEL line asserted and location and data written are
105 * immaterial. Just want to be able to prove that a
106 * configuration write can be correctly generated on the
107 * PCI bus. Intent is that this function by invocable from
108 * the /proc filesystem.
109 *
110 * INPUTS: m - synthetic file construction data
111 * v - iterator
112 *
113 * RETURNS: 0 or error
114 *
115 ****************************************************************************/
116static int gen_pci_cfg_wr_show(struct seq_file *m, void *v)
117{
118 unsigned char where = 0; /* Write to static Device/Vendor ID */
119 unsigned char bus_num = 0; /* Bus 0 */
120 unsigned char dev_fn = 0xF; /* Arbitrary device number */
121 u32 wr_data = 0xFF00AA00; /* Arbitrary data */
122 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
123 unsigned long value;
124 int intr;
125
126 seq_puts(m, "PMC MSP PCI: Beginning\n");
127
128 if (proc_init == 0) {
129 pci_proc_init();
130 proc_init = ~0;
131 }
132
133 seq_puts(m, "PMC MSP PCI: Before Cfg Wr\n");
134
135 /*
136 * Generate PCI Configuration Write Cycle
137 */
138
139 /* Clear cause register bits */
140 preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
141
142 /* Setup address that is to appear on PCI bus */
143 preg->config_addr = BPCI_CFGADDR_ENABLE |
144 (bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
145 (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
146 (where & 0xFC);
147
148 value = cpu_to_le32(wr_data);
149
150 /* Launch the PCI configuration write cycle */
151 *PCI_CONFIG_SPACE_REG = value;
152
153 /*
154 * Check if the PCI configuration cycle (rd or wr) succeeded, by
155 * checking the status bits for errors like master or target abort.
156 */
157 intr = preg->if_status;
158
159 seq_puts(m, "PMC MSP PCI: After Cfg Wr\n");
160 return 0;
161}
162
163static int gen_pci_cfg_wr_open(struct inode *inode, struct file *file)
164{
165 return single_open(file, gen_pci_cfg_wr_show, NULL);
166}
167
168static const struct file_operations gen_pci_cfg_wr_fops = {
169 .open = gen_pci_cfg_wr_open,
170 .read = seq_read,
171 .llseek = seq_lseek,
172 .release = single_release,
173};
174
175/*****************************************************************************
176 *
177 * FUNCTION: pci_proc_init
178 * _________________________________________________________________________
179 *
180 * DESCRIPTION: Create entries in the /proc filesystem for debug access.
181 *
182 * INPUTS: none
183 *
184 * OUTPUTS: none
185 *
186 * RETURNS: none
187 *
188 ****************************************************************************/
189static void pci_proc_init(void)
190{
191 proc_create("pmc_msp_pci_rd_cnt", 0, NULL, &msp_pci_rd_cnt_fops);
192 proc_create("pmc_msp_pci_cfg_wr", 0, NULL, &gen_pci_cfg_wr_fops);
193}
194#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
195
196static DEFINE_SPINLOCK(bpci_lock);
197
198/*****************************************************************************
199 *
200 * STRUCT: pci_io_resource
201 * _________________________________________________________________________
202 *
203 * DESCRIPTION: Defines the address range that pciauto() will use to
204 * assign to the I/O BARs of PCI devices.
205 *
206 * Use the start and end addresses of the MSP7120 PCI Host
207 * Controller I/O space, in the form that they appear on the
208 * PCI bus AFTER MSP7120 has performed address translation.
209 *
210 * For I/O accesses, MSP7120 ignores OATRAN and maps I/O
211 * accesses into the bottom 0xFFF region of address space,
212 * so that is the range to put into the pci_io_resource
213 * struct.
214 *
215 * In MSP4200, the start address was 0x04 instead of the
216 * expected 0x00. Will just assume there was a good reason
217 * for this!
218 *
219 * NOTES: Linux, by default, will assign I/O space to the lowest
220 * region of address space. Since MSP7120 and Linux,
221 * by default, have no offset in between how they map, the
222 * io_offset element of pci_controller struct should be set
223 * to zero.
224 * ELEMENTS:
225 * name - String used for a meaningful name.
226 *
227 * start - Start address of MSP7120's I/O space, as MSP7120 presents
228 * the address on the PCI bus.
229 *
230 * end - End address of MSP7120's I/O space, as MSP7120 presents
231 * the address on the PCI bus.
232 *
233 * flags - Attributes indicating the type of resource. In this case,
234 * indicate I/O space.
235 *
236 ****************************************************************************/
237static struct resource pci_io_resource = {
238 .name = "pci IO space",
239 .start = 0x04,
240 .end = 0x0FFF,
241 .flags = IORESOURCE_IO /* I/O space */
242};
243
244/*****************************************************************************
245 *
246 * STRUCT: pci_mem_resource
247 * _________________________________________________________________________
248 *
249 * DESCRIPTION: Defines the address range that pciauto() will use to
250 * assign to the memory BARs of PCI devices.
251 *
252 * The .start and .end values are dependent upon how address
253 * translation is performed by the OATRAN regiser.
254 *
255 * The values to use for .start and .end are the values
256 * in the form they appear on the PCI bus AFTER MSP7120 has
257 * performed OATRAN address translation.
258 *
259 * ELEMENTS:
260 * name - String used for a meaningful name.
261 *
262 * start - Start address of MSP7120's memory space, as MSP7120 presents
263 * the address on the PCI bus.
264 *
265 * end - End address of MSP7120's memory space, as MSP7120 presents
266 * the address on the PCI bus.
267 *
268 * flags - Attributes indicating the type of resource. In this case,
269 * indicate memory space.
270 *
271 ****************************************************************************/
272static struct resource pci_mem_resource = {
273 .name = "pci memory space",
274 .start = MSP_PCI_SPACE_BASE,
275 .end = MSP_PCI_SPACE_END,
276 .flags = IORESOURCE_MEM /* memory space */
277};
278
279/*****************************************************************************
280 *
281 * FUNCTION: bpci_interrupt
282 * _________________________________________________________________________
283 *
284 * DESCRIPTION: PCI status interrupt handler. Updates the count of how
285 * many times each status bit has been set, then clears
286 * the status bits. If the appropriate macros are defined,
287 * these counts can be viewed via the /proc filesystem.
288 *
289 * INPUTS: irq - unused
290 * dev_id - unused
291 * pt_regs - unused
292 *
293 * OUTPUTS: none
294 *
295 * RETURNS: PCIBIOS_SUCCESSFUL - success
296 *
297 ****************************************************************************/
298static irqreturn_t bpci_interrupt(int irq, void *dev_id)
299{
300 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
301 unsigned int stat = preg->if_status;
302
303#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
304 int i;
305 for (i = 0; i < 32; ++i) {
306 if ((1 << i) & stat)
307 ++pci_int_count[i];
308 }
309#endif /* PROC_FS && PCI_COUNTERS */
310
311 /* printk("PCI ISR: Status=%08X\n", stat); */
312
313 /* write to clear all asserted interrupts */
314 preg->if_status = stat;
315
316 return IRQ_HANDLED;
317}
318
319/*****************************************************************************
320 *
321 * FUNCTION: msp_pcibios_config_access
322 * _________________________________________________________________________
323 *
324 * DESCRIPTION: Performs a PCI configuration access (rd or wr), then
325 * checks that the access succeeded by querying MSP7120's
326 * PCI status bits.
327 *
328 * INPUTS:
329 * access_type - kind of PCI configuration cycle to perform
330 * (read or write). Legal values are
331 * PCI_ACCESS_WRITE and PCI_ACCESS_READ.
332 *
333 * bus - pointer to the bus number of the device to
334 * be targeted for the configuration cycle.
335 * The only element of the pci_bus structure
336 * used is bus->number. This argument determines
337 * if the configuration access will be Type 0 or
338 * Type 1. Since MSP7120 assumes itself to be the
339 * PCI Host, any non-zero bus->number generates
340 * a Type 1 access.
341 *
342 * devfn - this is an 8-bit field. The lower three bits
343 * specify the function number of the device to
344 * be targeted for the configuration cycle, with
345 * all three-bit combinations being legal. The
346 * upper five bits specify the device number,
347 * with legal values being 10 to 31.
348 *
349 * where - address within the Configuration Header
350 * space to access.
351 *
352 * data - for write accesses, contains the data to
353 * write.
354 *
355 * OUTPUTS:
356 * data - for read accesses, contains the value read.
357 *
358 * RETURNS: PCIBIOS_SUCCESSFUL - success
359 * -1 - access failure
360 *
361 ****************************************************************************/
362int msp_pcibios_config_access(unsigned char access_type,
363 struct pci_bus *bus,
364 unsigned int devfn,
365 unsigned char where,
366 u32 *data)
367{
368 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
369 unsigned char bus_num = bus->number;
370 unsigned char dev_fn = (unsigned char)devfn;
371 unsigned long flags;
372 unsigned long intr;
373 unsigned long value;
374 static char pciirqflag;
375 int ret;
376#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
377 unsigned int vpe_status;
378#endif
379
380#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
381 if (proc_init == 0) {
382 pci_proc_init();
383 proc_init = ~0;
384 }
385#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
386
387 /*
388 * Just the first time this function invokes, allocate
389 * an interrupt line for PCI host status interrupts. The
390 * allocation assigns an interrupt handler to the interrupt.
391 */
392 if (pciirqflag == 0) {
393 ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
394 bpci_interrupt,
395 IRQF_SHARED,
396 "PMC MSP PCI Host",
397 preg);
398 if (ret != 0)
399 return ret;
400 pciirqflag = ~0;
401 }
402
403#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
404 local_irq_save(flags);
405 vpe_status = dvpe();
406#else
407 spin_lock_irqsave(&bpci_lock, flags);
408#endif
409
410 /*
411 * Clear PCI cause register bits.
412 *
413 * In Polo, the PCI Host had a dedicated DMA called the
414 * Block Copy (not to be confused with the general purpose Block
415 * Copy Engine block). There appear to have been special interrupts
416 * for this Block Copy, called Block Copy 0 Fault (BC0F) and
417 * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this
418 * dedicated Block Copy block, so these two interrupts are now
419 * marked reserved. In case the Block Copy is resurrected in a
420 * future design, maintain the code that treats these two interrupts
421 * specially.
422 *
423 * Write to clear all interrupts in the PCI status register, aside
424 * from BC0F and BC1F.
425 */
426 preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
427
428 /* Setup address that is to appear on PCI bus */
429 preg->config_addr = BPCI_CFGADDR_ENABLE |
430 (bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
431 (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
432 (where & 0xFC);
433
434 /* IF access is a PCI configuration write */
435 if (access_type == PCI_ACCESS_WRITE) {
436 value = cpu_to_le32(*data);
437 *PCI_CONFIG_SPACE_REG = value;
438 } else {
439 /* ELSE access is a PCI configuration read */
440 value = le32_to_cpu(*PCI_CONFIG_SPACE_REG);
441 *data = value;
442 }
443
444 /*
445 * Check if the PCI configuration cycle (rd or wr) succeeded, by
446 * checking the status bits for errors like master or target abort.
447 */
448 intr = preg->if_status;
449
450 /* Clear config access */
451 preg->config_addr = 0;
452
453 /* IF error occurred */
454 if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) {
455 /* Clear status bits */
456 preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
457
458#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
459 evpe(vpe_status);
460 local_irq_restore(flags);
461#else
462 spin_unlock_irqrestore(&bpci_lock, flags);
463#endif
464
465 return -1;
466 }
467
468#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
469 evpe(vpe_status);
470 local_irq_restore(flags);
471#else
472 spin_unlock_irqrestore(&bpci_lock, flags);
473#endif
474
475 return PCIBIOS_SUCCESSFUL;
476}
477
478/*****************************************************************************
479 *
480 * FUNCTION: msp_pcibios_read_config_byte
481 * _________________________________________________________________________
482 *
483 * DESCRIPTION: Read a byte from PCI configuration address spac
484 * Since the hardware can't address 8 bit chunks
485 * directly, read a 32-bit chunk, then mask off extraneous
486 * bits.
487 *
488 * INPUTS bus - structure containing attributes for the PCI bus
489 * that the read is destined for.
490 * devfn - device/function combination that the read is
491 * destined for.
492 * where - register within the Configuration Header space
493 * to access.
494 *
495 * OUTPUTS val - read data
496 *
497 * RETURNS: PCIBIOS_SUCCESSFUL - success
498 * -1 - read access failure
499 *
500 ****************************************************************************/
501static int
502msp_pcibios_read_config_byte(struct pci_bus *bus,
503 unsigned int devfn,
504 int where,
505 u32 *val)
506{
507 u32 data = 0;
508
509 /*
510 * If the config access did not complete normally (e.g., underwent
511 * master abort) do the PCI compliant thing, which is to supply an
512 * all ones value.
513 */
514 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
515 where, &data)) {
516 *val = 0xFFFFFFFF;
517 return -1;
518 }
519
520 *val = (data >> ((where & 3) << 3)) & 0x0ff;
521
522 return PCIBIOS_SUCCESSFUL;
523}
524
525/*****************************************************************************
526 *
527 * FUNCTION: msp_pcibios_read_config_word
528 * _________________________________________________________________________
529 *
530 * DESCRIPTION: Read a word (16 bits) from PCI configuration address space.
531 * Since the hardware can't address 16 bit chunks
532 * directly, read a 32-bit chunk, then mask off extraneous
533 * bits.
534 *
535 * INPUTS bus - structure containing attributes for the PCI bus
536 * that the read is destined for.
537 * devfn - device/function combination that the read is
538 * destined for.
539 * where - register within the Configuration Header space
540 * to access.
541 *
542 * OUTPUTS val - read data
543 *
544 * RETURNS: PCIBIOS_SUCCESSFUL - success
545 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
546 * -1 - read access failure
547 *
548 ****************************************************************************/
549static int
550msp_pcibios_read_config_word(struct pci_bus *bus,
551 unsigned int devfn,
552 int where,
553 u32 *val)
554{
555 u32 data = 0;
556
557 /* if (where & 1) */ /* Commented out non-compliant code.
558 * Should allow word access to configuration
559 * registers, with only exception being when
560 * the word access would wrap around into
561 * the next dword.
562 */
563 if ((where & 3) == 3) {
564 *val = 0xFFFFFFFF;
565 return PCIBIOS_BAD_REGISTER_NUMBER;
566 }
567
568 /*
569 * If the config access did not complete normally (e.g., underwent
570 * master abort) do the PCI compliant thing, which is to supply an
571 * all ones value.
572 */
573 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
574 where, &data)) {
575 *val = 0xFFFFFFFF;
576 return -1;
577 }
578
579 *val = (data >> ((where & 3) << 3)) & 0x0ffff;
580
581 return PCIBIOS_SUCCESSFUL;
582}
583
584/*****************************************************************************
585 *
586 * FUNCTION: msp_pcibios_read_config_dword
587 * _________________________________________________________________________
588 *
589 * DESCRIPTION: Read a double word (32 bits) from PCI configuration
590 * address space.
591 *
592 * INPUTS bus - structure containing attributes for the PCI bus
593 * that the read is destined for.
594 * devfn - device/function combination that the read is
595 * destined for.
596 * where - register within the Configuration Header space
597 * to access.
598 *
599 * OUTPUTS val - read data
600 *
601 * RETURNS: PCIBIOS_SUCCESSFUL - success
602 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
603 * -1 - read access failure
604 *
605 ****************************************************************************/
606static int
607msp_pcibios_read_config_dword(struct pci_bus *bus,
608 unsigned int devfn,
609 int where,
610 u32 *val)
611{
612 u32 data = 0;
613
614 /* Address must be dword aligned. */
615 if (where & 3) {
616 *val = 0xFFFFFFFF;
617 return PCIBIOS_BAD_REGISTER_NUMBER;
618 }
619
620 /*
621 * If the config access did not complete normally (e.g., underwent
622 * master abort) do the PCI compliant thing, which is to supply an
623 * all ones value.
624 */
625 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
626 where, &data)) {
627 *val = 0xFFFFFFFF;
628 return -1;
629 }
630
631 *val = data;
632
633 return PCIBIOS_SUCCESSFUL;
634}
635
636/*****************************************************************************
637 *
638 * FUNCTION: msp_pcibios_write_config_byte
639 * _________________________________________________________________________
640 *
641 * DESCRIPTION: Write a byte to PCI configuration address space.
642 * Since the hardware can't address 8 bit chunks
643 * directly, a read-modify-write is performed.
644 *
645 * INPUTS bus - structure containing attributes for the PCI bus
646 * that the write is destined for.
647 * devfn - device/function combination that the write is
648 * destined for.
649 * where - register within the Configuration Header space
650 * to access.
651 * val - value to write
652 *
653 * OUTPUTS none
654 *
655 * RETURNS: PCIBIOS_SUCCESSFUL - success
656 * -1 - write access failure
657 *
658 ****************************************************************************/
659static int
660msp_pcibios_write_config_byte(struct pci_bus *bus,
661 unsigned int devfn,
662 int where,
663 u8 val)
664{
665 u32 data = 0;
666
667 /* read config space */
668 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
669 where, &data))
670 return -1;
671
672 /* modify the byte within the dword */
673 data = (data & ~(0xff << ((where & 3) << 3))) |
674 (val << ((where & 3) << 3));
675
676 /* write back the full dword */
677 if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
678 where, &data))
679 return -1;
680
681 return PCIBIOS_SUCCESSFUL;
682}
683
684/*****************************************************************************
685 *
686 * FUNCTION: msp_pcibios_write_config_word
687 * _________________________________________________________________________
688 *
689 * DESCRIPTION: Write a word (16-bits) to PCI configuration address space.
690 * Since the hardware can't address 16 bit chunks
691 * directly, a read-modify-write is performed.
692 *
693 * INPUTS bus - structure containing attributes for the PCI bus
694 * that the write is destined for.
695 * devfn - device/function combination that the write is
696 * destined for.
697 * where - register within the Configuration Header space
698 * to access.
699 * val - value to write
700 *
701 * OUTPUTS none
702 *
703 * RETURNS: PCIBIOS_SUCCESSFUL - success
704 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
705 * -1 - write access failure
706 *
707 ****************************************************************************/
708static int
709msp_pcibios_write_config_word(struct pci_bus *bus,
710 unsigned int devfn,
711 int where,
712 u16 val)
713{
714 u32 data = 0;
715
716 /* Fixed non-compliance: if (where & 1) */
717 if ((where & 3) == 3)
718 return PCIBIOS_BAD_REGISTER_NUMBER;
719
720 /* read config space */
721 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
722 where, &data))
723 return -1;
724
725 /* modify the word within the dword */
726 data = (data & ~(0xffff << ((where & 3) << 3))) |
727 (val << ((where & 3) << 3));
728
729 /* write back the full dword */
730 if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
731 where, &data))
732 return -1;
733
734 return PCIBIOS_SUCCESSFUL;
735}
736
737/*****************************************************************************
738 *
739 * FUNCTION: msp_pcibios_write_config_dword
740 * _________________________________________________________________________
741 *
742 * DESCRIPTION: Write a double word (32-bits) to PCI configuration address
743 * space.
744 *
745 * INPUTS bus - structure containing attributes for the PCI bus
746 * that the write is destined for.
747 * devfn - device/function combination that the write is
748 * destined for.
749 * where - register within the Configuration Header space
750 * to access.
751 * val - value to write
752 *
753 * OUTPUTS none
754 *
755 * RETURNS: PCIBIOS_SUCCESSFUL - success
756 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
757 * -1 - write access failure
758 *
759 ****************************************************************************/
760static int
761msp_pcibios_write_config_dword(struct pci_bus *bus,
762 unsigned int devfn,
763 int where,
764 u32 val)
765{
766 /* check that address is dword aligned */
767 if (where & 3)
768 return PCIBIOS_BAD_REGISTER_NUMBER;
769
770 /* perform write */
771 if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
772 where, &val))
773 return -1;
774
775 return PCIBIOS_SUCCESSFUL;
776}
777
778/*****************************************************************************
779 *
780 * FUNCTION: msp_pcibios_read_config
781 * _________________________________________________________________________
782 *
783 * DESCRIPTION: Interface the PCI configuration read request with
784 * the appropriate function, based on how many bytes
785 * the read request is.
786 *
787 * INPUTS bus - structure containing attributes for the PCI bus
788 * that the write is destined for.
789 * devfn - device/function combination that the write is
790 * destined for.
791 * where - register within the Configuration Header space
792 * to access.
793 * size - in units of bytes, should be 1, 2, or 4.
794 *
795 * OUTPUTS val - value read, with any extraneous bytes masked
796 * to zero.
797 *
798 * RETURNS: PCIBIOS_SUCCESSFUL - success
799 * -1 - failure
800 *
801 ****************************************************************************/
802int
803msp_pcibios_read_config(struct pci_bus *bus,
804 unsigned int devfn,
805 int where,
806 int size,
807 u32 *val)
808{
809 if (size == 1) {
810 if (msp_pcibios_read_config_byte(bus, devfn, where, val)) {
811 return -1;
812 }
813 } else if (size == 2) {
814 if (msp_pcibios_read_config_word(bus, devfn, where, val)) {
815 return -1;
816 }
817 } else if (size == 4) {
818 if (msp_pcibios_read_config_dword(bus, devfn, where, val)) {
819 return -1;
820 }
821 } else {
822 *val = 0xFFFFFFFF;
823 return -1;
824 }
825
826 return PCIBIOS_SUCCESSFUL;
827}
828
829/*****************************************************************************
830 *
831 * FUNCTION: msp_pcibios_write_config
832 * _________________________________________________________________________
833 *
834 * DESCRIPTION: Interface the PCI configuration write request with
835 * the appropriate function, based on how many bytes
836 * the read request is.
837 *
838 * INPUTS bus - structure containing attributes for the PCI bus
839 * that the write is destined for.
840 * devfn - device/function combination that the write is
841 * destined for.
842 * where - register within the Configuration Header space
843 * to access.
844 * size - in units of bytes, should be 1, 2, or 4.
845 * val - value to write
846 *
847 * OUTPUTS: none
848 *
849 * RETURNS: PCIBIOS_SUCCESSFUL - success
850 * -1 - failure
851 *
852 ****************************************************************************/
853int
854msp_pcibios_write_config(struct pci_bus *bus,
855 unsigned int devfn,
856 int where,
857 int size,
858 u32 val)
859{
860 if (size == 1) {
861 if (msp_pcibios_write_config_byte(bus, devfn,
862 where, (u8)(0xFF & val))) {
863 return -1;
864 }
865 } else if (size == 2) {
866 if (msp_pcibios_write_config_word(bus, devfn,
867 where, (u16)(0xFFFF & val))) {
868 return -1;
869 }
870 } else if (size == 4) {
871 if (msp_pcibios_write_config_dword(bus, devfn, where, val)) {
872 return -1;
873 }
874 } else {
875 return -1;
876 }
877
878 return PCIBIOS_SUCCESSFUL;
879}
880
881/*****************************************************************************
882 *
883 * STRUCTURE: msp_pci_ops
884 * _________________________________________________________________________
885 *
886 * DESCRIPTION: structure to abstract the hardware specific PCI
887 * configuration accesses.
888 *
889 * ELEMENTS:
890 * read - function for Linux to generate PCI Configuration reads.
891 * write - function for Linux to generate PCI Configuration writes.
892 *
893 ****************************************************************************/
894struct pci_ops msp_pci_ops = {
895 .read = msp_pcibios_read_config,
896 .write = msp_pcibios_write_config
897};
898
899/*****************************************************************************
900 *
901 * STRUCTURE: msp_pci_controller
902 * _________________________________________________________________________
903 *
904 * Describes the attributes of the MSP7120 PCI Host Controller
905 *
906 * ELEMENTS:
907 * pci_ops - abstracts the hardware specific PCI configuration
908 * accesses.
909 *
910 * mem_resource - address range pciauto() uses to assign to PCI device
911 * memory BARs.
912 *
913 * mem_offset - offset between how MSP7120 outbound PCI memory
914 * transaction addresses appear on the PCI bus and how Linux
915 * wants to configure memory BARs of the PCI devices.
916 * MSP7120 does nothing funky, so just set to zero.
917 *
918 * io_resource - address range pciauto() uses to assign to PCI device
919 * I/O BARs.
920 *
921 * io_offset - offset between how MSP7120 outbound PCI I/O
922 * transaction addresses appear on the PCI bus and how
923 * Linux defaults to configure I/O BARs of the PCI devices.
924 * MSP7120 maps outbound I/O accesses into the bottom
925 * bottom 4K of PCI address space (and ignores OATRAN).
926 * Since the Linux default is to configure I/O BARs to the
927 * bottom 4K, no special offset is needed. Just set to zero.
928 *
929 ****************************************************************************/
930static struct pci_controller msp_pci_controller = {
931 .pci_ops = &msp_pci_ops,
932 .mem_resource = &pci_mem_resource,
933 .mem_offset = 0,
934 .io_map_base = MSP_PCI_IOSPACE_BASE,
935 .io_resource = &pci_io_resource,
936 .io_offset = 0
937};
938
939/*****************************************************************************
940 *
941 * FUNCTION: msp_pci_init
942 * _________________________________________________________________________
943 *
944 * DESCRIPTION: Initialize the PCI Host Controller and register it with
945 * Linux so Linux can seize control of the PCI bus.
946 *
947 ****************************************************************************/
948void __init msp_pci_init(void)
949{
950 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
951 u32 id;
952
953 /* Extract Device ID */
954 id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12;
955
956 /* Check if JTAG ID identifies MSP7120 */
957 if (!MSP_HAS_PCI(id)) {
958 printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id);
959 goto no_pci;
960 }
961
962 /*
963 * Enable flushing of the PCI-SDRAM queue upon a read
964 * of the SDRAM's Memory Configuration Register.
965 */
966 *(unsigned long *)QFLUSH_REG_1 = 3;
967
968 /* Configure PCI Host Controller. */
969 preg->if_status = ~0; /* Clear cause register bits */
970 preg->config_addr = 0; /* Clear config access */
971 preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */
972 preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */
973
974 /* configure so inb(), outb(), and family are functional */
975 set_io_port_base(MSP_PCI_IOSPACE_BASE);
976
977 /* Tell Linux the details of the MSP7120 PCI Host Controller */
978 register_pci_controller(&msp_pci_controller);
979
980 return;
981
982no_pci:
983 /* Disable PCI channel */
984 printk(KERN_WARNING "PCI: no host PCI bus detected\n");
985}