Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree file for HP t5325 Thin Client"
4 *
5 * Copyright (C) 2014
6 *
7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
8 * Andrew Lunn <andrew@lunn.ch>
9 *
10*/
11
12/dts-v1/;
13
14#include "kirkwood.dtsi"
15#include "kirkwood-6281.dtsi"
16
17/ {
18 model = "HP t5325 Thin Client";
19 compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
20
21 memory {
22 device_type = "memory";
23 reg = <0x00000000 0x20000000>;
24 };
25
26 chosen {
27 bootargs = "console=ttyS0,115200n8";
28 stdout-path = &uart0;
29 };
30
31 ocp@f1000000 {
32 pinctrl: pin-controller@10000 {
33 pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
34 pinctrl-names = "default";
35
36 pmx_button_power: pmx-button_power {
37 marvell,pins = "mpp45";
38 marvell,function = "gpio";
39 };
40
41 pmx_power_off: pmx-power-off {
42 marvell,pins = "mpp48";
43 marvell,function = "gpio";
44 };
45
46 pmx_led: pmx-led {
47 marvell,pins = "mpp21";
48 marvell,function = "gpio";
49 };
50
51 pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
52 marvell,pins = "mpp44";
53 marvell,function = "gpio";
54 };
55
56 pmx_spi: pmx-spi {
57 marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
58 marvell,function = "spi";
59 };
60
61 pmx_sysrst: pmx-sysrst {
62 marvell,pins = "mpp6";
63 marvell,function = "sysrst";
64 };
65
66 pmx_i2s: pmx-i2s {
67 marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
68 "mpp43";
69 marvell,function = "audio";
70 };
71 };
72
73 spi@10600 {
74 status = "okay";
75
76 flash@0 {
77 #address-cells = <1>;
78 #size-cells = <1>;
79 compatible = "st,m25p80", "jedec,spi-nor";
80 spi-max-frequency = <86000000>;
81 reg = <0>;
82 mode = <0>;
83
84 partition@0 {
85 reg = <0x0 0x80000>;
86 label = "u-boot";
87 };
88
89 partition@1 {
90 reg = <0x80000 0x40000>;
91 label = "SSD firmware";
92 };
93
94 partition@2 {
95 reg = <0xc0000 0x10000>;
96 label = "u-boot env";
97 };
98
99 partition@3 {
100 reg = <0xd0000 0x10000>;
101 label = "permanent u-boot env";
102 };
103
104 partition@4 {
105 reg = <0xd0000 0x10000>;
106 label = "permanent u-boot env";
107 };
108 };
109 };
110
111 i2c@11000 {
112 status = "okay";
113
114 alc5621: alc5621@1a {
115 compatible = "realtek,alc5621";
116 reg = <0x1a>;
117 #sound-dai-cells = <0>;
118 add-ctrl = <0x3700>;
119 jack-det-ctrl = <0x4810>;
120 };
121 };
122
123 serial@12000 {
124 status = "okay";
125 };
126
127 sata@80000 {
128 status = "okay";
129 nr-ports = <2>;
130 };
131
132 audio: audio-controller@a0000 {
133 status = "okay";
134 };
135 };
136
137 regulators {
138 compatible = "simple-bus";
139 #address-cells = <1>;
140 #size-cells = <0>;
141 pinctrl-0 = <&pmx_usb_sata_power_enable>;
142 pinctrl-names = "default";
143
144 usb_power: regulator@1 {
145 compatible = "regulator-fixed";
146 reg = <1>;
147 regulator-name = "USB-SATA Power";
148 regulator-min-microvolt = <5000000>;
149 regulator-max-microvolt = <5000000>;
150 enable-active-high;
151 regulator-always-on;
152 regulator-boot-on;
153 gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
154 };
155 };
156
157 gpio_keys {
158 compatible = "gpio-keys";
159 #address-cells = <1>;
160 #size-cells = <0>;
161 pinctrl-0 = <&pmx_button_power>;
162 pinctrl-names = "default";
163
164 power {
165 label = "Power Button";
166 linux,code = <KEY_POWER>;
167 gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
168 };
169 };
170
171 gpio_poweroff {
172 compatible = "gpio-poweroff";
173 pinctrl-0 = <&pmx_power_off>;
174 pinctrl-names = "default";
175 gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
176 };
177
178 sound {
179 compatible = "simple-audio-card";
180 simple-audio-card,format = "i2s";
181 simple-audio-card,routing =
182 "Headphone Jack", "HPL",
183 "Headphone Jack", "HPR",
184 "Speaker", "SPKOUT",
185 "Speaker", "SPKOUTN",
186 "MIC1", "Mic Jack",
187 "MIC2", "Mic Jack";
188 simple-audio-card,widgets =
189 "Headphone", "Headphone Jack",
190 "Speaker", "Speaker",
191 "Microphone", "Mic Jack";
192
193 simple-audio-card,mclk-fs = <256>;
194
195 simple-audio-card,cpu {
196 sound-dai = <&audio>;
197 };
198
199 simple-audio-card,codec {
200 sound-dai = <&alc5621>;
201 };
202 };
203};
204
205&mdio {
206 status = "okay";
207
208 ethphy0: ethernet-phy@8 {
209 device_type = "ethernet-phy";
210 reg = <8>;
211 };
212};
213
214ð0 {
215 status = "okay";
216 ethernet0-port@0 {
217 phy-handle = <ðphy0>;
218 };
219};
220
221&pciec {
222 status = "okay";
223};
224
225&pcie0 {
226 status = "okay";
227};
1/*
2 * Device Tree file for HP t5325 Thin Client"
3 *
4 * Copyright (C) 2014
5 *
6 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
7 * Andrew Lunn <andrew@lunn.ch>
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12*/
13
14/dts-v1/;
15
16#include "kirkwood.dtsi"
17#include "kirkwood-6281.dtsi"
18
19/ {
20 model = "HP t5325 Thin Client";
21 compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
22
23 memory {
24 device_type = "memory";
25 reg = <0x00000000 0x20000000>;
26 };
27
28 chosen {
29 bootargs = "console=ttyS0,115200n8";
30 };
31
32 mbus {
33 pcie-controller {
34 status = "okay";
35
36 pcie@1,0 {
37 status = "okay";
38 };
39 };
40 };
41
42 ocp@f1000000 {
43 pinctrl: pinctrl@10000 {
44 pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
45 pinctrl-names = "default";
46
47 pmx_button_power: pmx-button_power {
48 marvell,pins = "mpp45";
49 marvell,function = "gpio";
50 };
51
52 pmx_power_off: pmx-power-off {
53 marvell,pins = "mpp48";
54 marvell,function = "gpio";
55 };
56
57 pmx_led: pmx-led {
58 marvell,pins = "mpp21";
59 marvell,function = "gpio";
60 };
61
62 pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
63 marvell,pins = "mpp44";
64 marvell,function = "gpio";
65 };
66
67 /*
68 * Redefined from kirkwood-6281.dtsi, because
69 * we don't use SPI CS on MPP0, but on MPP7.
70 */
71 pmx_spi: pmx-spi {
72 marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
73 marvell,function = "spi";
74 };
75
76 pmx_sysrst: pmx-sysrst {
77 marvell,pins = "mpp6";
78 marvell,function = "sysrst";
79 };
80
81 pmx_i2s: pmx-i2s {
82 marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
83 "mpp43";
84 marvell,function = "audio";
85 };
86 };
87
88 spi@10600 {
89 pinctrl-0 = <&pmx_spi>;
90 pinctrl-names = "default";
91 status = "okay";
92
93 flash@0 {
94 #address-cells = <1>;
95 #size-cells = <1>;
96 compatible = "st,m25p80";
97 spi-max-frequency = <86000000>;
98 reg = <0>;
99 mode = <0>;
100
101 partition@0 {
102 reg = <0x0 0x80000>;
103 label = "u-boot";
104 };
105
106 partition@1 {
107 reg = <0x80000 0x40000>;
108 label = "SSD firmware";
109 };
110
111 partition@2 {
112 reg = <0xc0000 0x10000>;
113 label = "u-boot env";
114 };
115
116 partition@3 {
117 reg = <0xd0000 0x10000>;
118 label = "permanent u-boot env";
119 };
120
121 partition@4 {
122 reg = <0xd0000 0x10000>;
123 label = "permanent u-boot env";
124 };
125 };
126 };
127
128 i2c@11000 {
129 status = "okay";
130 };
131
132 serial@12000 {
133 status = "okay";
134 };
135
136 sata@80000 {
137 status = "okay";
138 nr-ports = <2>;
139 };
140
141 audio: audio-controller@a0000 {
142 status = "okay";
143 };
144 };
145
146 regulators {
147 compatible = "simple-bus";
148 #address-cells = <1>;
149 #size-cells = <0>;
150 pinctrl-0 = <&pmx_usb_sata_power_enable>;
151 pinctrl-names = "default";
152
153 usb_power: regulator@1 {
154 compatible = "regulator-fixed";
155 reg = <1>;
156 regulator-name = "USB-SATA Power";
157 regulator-min-microvolt = <5000000>;
158 regulator-max-microvolt = <5000000>;
159 enable-active-high;
160 regulator-always-on;
161 regulator-boot-on;
162 gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
163 };
164 };
165
166 gpio_keys {
167 compatible = "gpio-keys";
168 #address-cells = <1>;
169 #size-cells = <0>;
170 pinctrl-0 = <&pmx_button_power>;
171 pinctrl-names = "default";
172
173 button@1 {
174 label = "Power Button";
175 linux,code = <KEY_POWER>;
176 gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
177 };
178 };
179
180 gpio_poweroff {
181 compatible = "gpio-poweroff";
182 pinctrl-0 = <&pmx_power_off>;
183 pinctrl-names = "default";
184 gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
185 };
186
187};
188
189&mdio {
190 status = "okay";
191
192 ethphy0: ethernet-phy {
193 device_type = "ethernet-phy";
194 reg = <8>;
195 };
196};
197
198ð0 {
199 status = "okay";
200 ethernet0-port@0 {
201 phy-handle = <ðphy0>;
202 };
203};