Loading...
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8 model = "Iomega StorCenter ix2-200";
9 compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11 memory {
12 device_type = "memory";
13 reg = <0x00000000 0x10000000>;
14 };
15
16 chosen {
17 bootargs = "console=ttyS0,115200n8 earlyprintk";
18 stdout-path = &uart0;
19 };
20
21 ocp@f1000000 {
22 pinctrl: pin-controller@10000 {
23 pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
24 &pmx_led_sata_brt_ctrl_2
25 &pmx_led_backup_brt_ctrl_1
26 &pmx_led_backup_brt_ctrl_2
27 &pmx_led_power_brt_ctrl_1
28 &pmx_led_power_brt_ctrl_2
29 &pmx_led_health_brt_ctrl_1
30 &pmx_led_health_brt_ctrl_2
31 &pmx_led_rebuild_brt_ctrl_1
32 &pmx_led_rebuild_brt_ctrl_2 >;
33 pinctrl-names = "default";
34
35 pmx_button_reset: pmx-button-reset {
36 marvell,pins = "mpp12";
37 marvell,function = "gpio";
38 };
39 pmx_button_power: pmx-button-power {
40 marvell,pins = "mpp14";
41 marvell,function = "gpio";
42 };
43 pmx_led_backup: pmx-led-backup {
44 marvell,pins = "mpp15";
45 marvell,function = "gpio";
46 };
47 pmx_led_power: pmx-led-power {
48 marvell,pins = "mpp16";
49 marvell,function = "gpio";
50 };
51 pmx_button_otb: pmx-button-otb {
52 marvell,pins = "mpp35";
53 marvell,function = "gpio";
54 };
55 pmx_led_rebuild: pmx-led-rebuild {
56 marvell,pins = "mpp36";
57 marvell,function = "gpio";
58 };
59 pmx_led_health: pmx-led_health {
60 marvell,pins = "mpp37";
61 marvell,function = "gpio";
62 };
63 pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
64 marvell,pins = "mpp38";
65 marvell,function = "gpio";
66 };
67 pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
68 marvell,pins = "mpp39";
69 marvell,function = "gpio";
70 };
71 pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
72 marvell,pins = "mpp40";
73 marvell,function = "gpio";
74 };
75 pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
76 marvell,pins = "mpp41";
77 marvell,function = "gpio";
78 };
79 pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
80 marvell,pins = "mpp42";
81 marvell,function = "gpio";
82 };
83 pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
84 marvell,pins = "mpp43";
85 marvell,function = "gpio";
86 };
87 pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
88 marvell,pins = "mpp44";
89 marvell,function = "gpio";
90 };
91 pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
92 marvell,pins = "mpp45";
93 marvell,function = "gpio";
94 };
95 pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
96 marvell,pins = "mpp46";
97 marvell,function = "gpio";
98 };
99 pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
100 marvell,pins = "mpp47";
101 marvell,function = "gpio";
102 };
103
104 };
105 i2c@11000 {
106 status = "okay";
107
108 lm63: lm63@4c {
109 compatible = "national,lm63";
110 reg = <0x4c>;
111 };
112 };
113
114 serial@12000 {
115 status = "ok";
116 };
117
118 sata@80000 {
119 status = "okay";
120 nr-ports = <2>;
121 };
122
123 };
124 gpio-leds {
125 compatible = "gpio-leds";
126 pinctrl-0 = < &pmx_led_backup &pmx_led_power
127 &pmx_led_rebuild &pmx_led_health >;
128 pinctrl-names = "default";
129
130 power_led {
131 label = "status:white:power_led";
132 gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
133 default-state = "keep";
134 };
135 rebuild_led {
136 label = "status:white:rebuild_led";
137 gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
138 };
139 health_led {
140 label = "status:red:health_led";
141 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
142 };
143 backup_led {
144 label = "status:blue:backup_led";
145 gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
146 };
147 };
148 gpio-keys {
149 compatible = "gpio-keys";
150 #address-cells = <1>;
151 #size-cells = <0>;
152 pinctrl-0 = <&pmx_button_reset &pmx_button_power
153 &pmx_button_otb>;
154 pinctrl-names = "default";
155
156
157 Power {
158 label = "Power Button";
159 linux,code = <KEY_POWER>;
160 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
161 };
162 Reset {
163 label = "Reset Button";
164 linux,code = <KEY_RESTART>;
165 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
166 };
167 OTB {
168 label = "OTB Button";
169 linux,code = <KEY_COPY>;
170 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
171 };
172 };
173 gpio-poweroff {
174 compatible = "gpio-poweroff";
175 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
176 };
177};
178
179&nand {
180 status = "okay";
181
182 partition@0 {
183 label = "u-boot";
184 reg = <0x0000000 0x100000>;
185 read-only;
186 };
187
188 partition@a0000 {
189 label = "env";
190 reg = <0xa0000 0x20000>;
191 read-only;
192 };
193
194 partition@100000 {
195 label = "uImage";
196 reg = <0x100000 0x300000>;
197 };
198
199 partition@400000 {
200 label = "rootfs";
201 reg = <0x400000 0x1C00000>;
202 };
203};
204
205&mdio {
206 status = "okay";
207
208 ethphy1: ethernet-phy@11 {
209 reg = <11>;
210 };
211};
212
213ð0 {
214 status = "okay";
215 ethernet0-port@0 {
216 speed = <1000>;
217 duplex = <1>;
218 };
219};
220
221ð1 {
222 status = "okay";
223 ethernet1-port@0 {
224 phy-handle = <ðphy1>;
225 };
226};
1/dts-v1/;
2
3#include "kirkwood.dtsi"
4#include "kirkwood-6281.dtsi"
5
6/ {
7 model = "Iomega StorCenter ix2-200";
8 compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
9
10 memory {
11 device_type = "memory";
12 reg = <0x00000000 0x10000000>;
13 };
14
15 chosen {
16 bootargs = "console=ttyS0,115200n8 earlyprintk";
17 };
18
19 ocp@f1000000 {
20 pinctrl: pinctrl@10000 {
21 pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
22 &pmx_led_sata_brt_ctrl_2
23 &pmx_led_backup_brt_ctrl_1
24 &pmx_led_backup_brt_ctrl_2
25 &pmx_led_power_brt_ctrl_1
26 &pmx_led_power_brt_ctrl_2
27 &pmx_led_health_brt_ctrl_1
28 &pmx_led_health_brt_ctrl_2
29 &pmx_led_rebuild_brt_ctrl_1
30 &pmx_led_rebuild_brt_ctrl_2 >;
31 pinctrl-names = "default";
32
33 pmx_button_reset: pmx-button-reset {
34 marvell,pins = "mpp12";
35 marvell,function = "gpio";
36 };
37 pmx_button_power: pmx-button-power {
38 marvell,pins = "mpp14";
39 marvell,function = "gpio";
40 };
41 pmx_led_backup: pmx-led-backup {
42 marvell,pins = "mpp15";
43 marvell,function = "gpio";
44 };
45 pmx_led_power: pmx-led-power {
46 marvell,pins = "mpp16";
47 marvell,function = "gpio";
48 };
49 pmx_button_otb: pmx-button-otb {
50 marvell,pins = "mpp35";
51 marvell,function = "gpio";
52 };
53 pmx_led_rebuild: pmx-led-rebuild {
54 marvell,pins = "mpp36";
55 marvell,function = "gpio";
56 };
57 pmx_led_health: pmx-led_health {
58 marvell,pins = "mpp37";
59 marvell,function = "gpio";
60 };
61 pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
62 marvell,pins = "mpp38";
63 marvell,function = "gpio";
64 };
65 pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
66 marvell,pins = "mpp39";
67 marvell,function = "gpio";
68 };
69 pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
70 marvell,pins = "mpp40";
71 marvell,function = "gpio";
72 };
73 pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
74 marvell,pins = "mpp41";
75 marvell,function = "gpio";
76 };
77 pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
78 marvell,pins = "mpp42";
79 marvell,function = "gpio";
80 };
81 pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
82 marvell,pins = "mpp43";
83 marvell,function = "gpio";
84 };
85 pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
86 marvell,pins = "mpp44";
87 marvell,function = "gpio";
88 };
89 pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
90 marvell,pins = "mpp45";
91 marvell,function = "gpio";
92 };
93 pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
94 marvell,pins = "mpp46";
95 marvell,function = "gpio";
96 };
97 pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
98 marvell,pins = "mpp47";
99 marvell,function = "gpio";
100 };
101
102 };
103 i2c@11000 {
104 status = "okay";
105
106 lm63: lm63@4c {
107 compatible = "national,lm63";
108 reg = <0x4c>;
109 };
110 };
111
112 serial@12000 {
113 status = "ok";
114 };
115
116 sata@80000 {
117 status = "okay";
118 nr-ports = <2>;
119 };
120
121 };
122 gpio-leds {
123 compatible = "gpio-leds";
124 pinctrl-0 = < &pmx_led_backup &pmx_led_power
125 &pmx_led_rebuild &pmx_led_health >;
126 pinctrl-names = "default";
127
128 power_led {
129 label = "status:white:power_led";
130 gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
131 default-state = "keep";
132 };
133 rebuild_led {
134 label = "status:white:rebuild_led";
135 gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
136 };
137 health_led {
138 label = "status:red:health_led";
139 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
140 };
141 backup_led {
142 label = "status:blue:backup_led";
143 gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
144 };
145 };
146 gpio-keys {
147 compatible = "gpio-keys";
148 #address-cells = <1>;
149 #size-cells = <0>;
150 pinctrl-0 = <&pmx_button_reset &pmx_button_power
151 &pmx_button_otb>;
152 pinctrl-names = "default";
153
154
155 Power {
156 label = "Power Button";
157 linux,code = <KEY_POWER>;
158 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
159 };
160 Reset {
161 label = "Reset Button";
162 linux,code = <KEY_RESTART>;
163 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
164 };
165 OTB {
166 label = "OTB Button";
167 linux,code = <KEY_COPY>;
168 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
169 };
170 };
171};
172
173&nand {
174 status = "okay";
175
176 partition@0 {
177 label = "u-boot";
178 reg = <0x0000000 0x100000>;
179 read-only;
180 };
181
182 partition@a0000 {
183 label = "env";
184 reg = <0xa0000 0x20000>;
185 read-only;
186 };
187
188 partition@100000 {
189 label = "uImage";
190 reg = <0x100000 0x300000>;
191 };
192
193 partition@400000 {
194 label = "uInitrd";
195 reg = <0x540000 0x1000000>;
196 };
197};
198
199&mdio {
200 status = "okay";
201
202 ethphy1: ethernet-phy@11 {
203 reg = <11>;
204 };
205};
206
207ð0 {
208 status = "okay";
209 ethernet0-port@0 {
210 speed = <1000>;
211 duplex = <1>;
212 };
213};
214
215ð1 {
216 status = "okay";
217 ethernet1-port@0 {
218 phy-handle = <ðphy1>;
219 };
220};