Loading...
1/*
2 * Copyright 2012 Freescale Semiconductor, Inc.
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/dts-v1/;
13#include "imx28.dtsi"
14
15/ {
16 model = "Freescale i.MX28 Evaluation Kit";
17 compatible = "fsl,imx28-evk", "fsl,imx28";
18
19 memory@40000000 {
20 reg = <0x40000000 0x08000000>;
21 };
22
23 apb@80000000 {
24 apbh@80000000 {
25 gpmi-nand@8000c000 {
26 pinctrl-names = "default";
27 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
28 &gpmi_pins_evk>;
29 status = "okay";
30 };
31
32 ssp0: ssp@80010000 {
33 compatible = "fsl,imx28-mmc";
34 pinctrl-names = "default";
35 pinctrl-0 = <&mmc0_8bit_pins_a
36 &mmc0_cd_cfg &mmc0_sck_cfg>;
37 bus-width = <8>;
38 wp-gpios = <&gpio2 12 0>;
39 vmmc-supply = <®_vddio_sd0>;
40 status = "okay";
41 };
42
43 ssp1: ssp@80012000 {
44 compatible = "fsl,imx28-mmc";
45 bus-width = <8>;
46 wp-gpios = <&gpio0 28 0>;
47 };
48
49 ssp2: ssp@80014000 {
50 #address-cells = <1>;
51 #size-cells = <0>;
52 compatible = "fsl,imx28-spi";
53 pinctrl-names = "default";
54 pinctrl-0 = <&spi2_pins_a>;
55 status = "okay";
56
57 flash: m25p80@0 {
58 #address-cells = <1>;
59 #size-cells = <1>;
60 compatible = "sst,sst25vf016b", "jedec,spi-nor";
61 spi-max-frequency = <40000000>;
62 reg = <0>;
63 };
64 };
65
66 pinctrl@80018000 {
67 pinctrl-names = "default";
68 pinctrl-0 = <&hog_pins_a>;
69
70 hog_pins_a: hog@0 {
71 reg = <0>;
72 fsl,pinmux-ids = <
73 MX28_PAD_SSP1_CMD__GPIO_2_13
74 MX28_PAD_SSP1_DATA3__GPIO_2_15
75 MX28_PAD_ENET0_RX_CLK__GPIO_4_13
76 MX28_PAD_SSP1_SCK__GPIO_2_12
77 MX28_PAD_PWM3__GPIO_3_28
78 MX28_PAD_LCD_RESET__GPIO_3_30
79 MX28_PAD_AUART2_RX__GPIO_3_8
80 MX28_PAD_AUART2_TX__GPIO_3_9
81 >;
82 fsl,drive-strength = <MXS_DRIVE_4mA>;
83 fsl,voltage = <MXS_VOLTAGE_HIGH>;
84 fsl,pull-up = <MXS_PULL_DISABLE>;
85 };
86
87 led_pin_gpio3_5: led_gpio3_5@0 {
88 reg = <0>;
89 fsl,pinmux-ids = <
90 MX28_PAD_AUART1_TX__GPIO_3_5
91 >;
92 fsl,drive-strength = <MXS_DRIVE_4mA>;
93 fsl,voltage = <MXS_VOLTAGE_HIGH>;
94 fsl,pull-up = <MXS_PULL_DISABLE>;
95 };
96
97 gpmi_pins_evk: gpmi-nand-evk@0 {
98 reg = <0>;
99 fsl,pinmux-ids = <
100 MX28_PAD_GPMI_CE1N__GPMI_CE1N
101 MX28_PAD_GPMI_RDY1__GPMI_READY1
102 >;
103 fsl,drive-strength = <MXS_DRIVE_4mA>;
104 fsl,voltage = <MXS_VOLTAGE_HIGH>;
105 fsl,pull-up = <MXS_PULL_DISABLE>;
106 };
107
108 lcdif_pins_evk: lcdif-evk@0 {
109 reg = <0>;
110 fsl,pinmux-ids = <
111 MX28_PAD_LCD_RD_E__LCD_VSYNC
112 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
113 MX28_PAD_LCD_RS__LCD_DOTCLK
114 MX28_PAD_LCD_CS__LCD_ENABLE
115 >;
116 fsl,drive-strength = <MXS_DRIVE_4mA>;
117 fsl,voltage = <MXS_VOLTAGE_HIGH>;
118 fsl,pull-up = <MXS_PULL_DISABLE>;
119 };
120 };
121
122 lcdif@80030000 {
123 pinctrl-names = "default";
124 pinctrl-0 = <&lcdif_24bit_pins_a
125 &lcdif_pins_evk>;
126 lcd-supply = <®_lcd_3v3>;
127 display = <&display0>;
128 status = "okay";
129
130 display0: display0 {
131 bits-per-pixel = <32>;
132 bus-width = <24>;
133
134 display-timings {
135 native-mode = <&timing0>;
136 timing0: timing0 {
137 clock-frequency = <33500000>;
138 hactive = <800>;
139 vactive = <480>;
140 hback-porch = <89>;
141 hfront-porch = <164>;
142 vback-porch = <23>;
143 vfront-porch = <10>;
144 hsync-len = <10>;
145 vsync-len = <10>;
146 hsync-active = <0>;
147 vsync-active = <0>;
148 de-active = <1>;
149 pixelclk-active = <0>;
150 };
151 };
152 };
153 };
154
155 can0: can@80032000 {
156 pinctrl-names = "default";
157 pinctrl-0 = <&can0_pins_a>;
158 xceiver-supply = <®_can_3v3>;
159 status = "okay";
160 };
161
162 can1: can@80034000 {
163 pinctrl-names = "default";
164 pinctrl-0 = <&can1_pins_a>;
165 xceiver-supply = <®_can_3v3>;
166 status = "okay";
167 };
168 };
169
170 apbx@80040000 {
171 saif0: saif@80042000 {
172 pinctrl-names = "default";
173 pinctrl-0 = <&saif0_pins_a>;
174 status = "okay";
175 };
176
177 saif1: saif@80046000 {
178 pinctrl-names = "default";
179 pinctrl-0 = <&saif1_pins_a>;
180 fsl,saif-master = <&saif0>;
181 status = "okay";
182 };
183
184 lradc@80050000 {
185 status = "okay";
186 fsl,lradc-touchscreen-wires = <4>;
187 fsl,ave-ctrl = <4>;
188 fsl,ave-delay = <2>;
189 fsl,settling = <10>;
190 };
191
192 i2c0: i2c@80058000 {
193 pinctrl-names = "default";
194 pinctrl-0 = <&i2c0_pins_a>;
195 status = "okay";
196
197 sgtl5000: codec@a {
198 compatible = "fsl,sgtl5000";
199 reg = <0x0a>;
200 #sound-dai-cells = <0>;
201 VDDA-supply = <®_3p3v>;
202 VDDIO-supply = <®_3p3v>;
203 clocks = <&saif0>;
204 };
205
206 at24@51 {
207 compatible = "atmel,24c32";
208 pagesize = <32>;
209 reg = <0x51>;
210 };
211 };
212
213 pwm: pwm@80064000 {
214 pinctrl-names = "default";
215 pinctrl-0 = <&pwm2_pins_a>;
216 status = "okay";
217 };
218
219 duart: serial@80074000 {
220 pinctrl-names = "default";
221 pinctrl-0 = <&duart_pins_a>;
222 status = "okay";
223 };
224
225 auart0: serial@8006a000 {
226 pinctrl-names = "default";
227 pinctrl-0 = <&auart0_pins_a>;
228 uart-has-rtscts;
229 status = "okay";
230 };
231
232 auart3: serial@80070000 {
233 pinctrl-names = "default";
234 pinctrl-0 = <&auart3_pins_a>;
235 status = "okay";
236 };
237
238 usbphy0: usbphy@8007c000 {
239 status = "okay";
240 };
241
242 usbphy1: usbphy@8007e000 {
243 status = "okay";
244 };
245 };
246 };
247
248 ahb@80080000 {
249 usb0: usb@80080000 {
250 pinctrl-names = "default";
251 pinctrl-0 = <&usb0_id_pins_a>;
252 vbus-supply = <®_usb0_vbus>;
253 status = "okay";
254 };
255
256 usb1: usb@80090000 {
257 vbus-supply = <®_usb1_vbus>;
258 status = "okay";
259 };
260
261 mac0: ethernet@800f0000 {
262 phy-mode = "rmii";
263 pinctrl-names = "default";
264 pinctrl-0 = <&mac0_pins_a>;
265 phy-supply = <®_fec_3v3>;
266 phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
267 phy-reset-duration = <100>;
268 status = "okay";
269 };
270
271 mac1: ethernet@800f4000 {
272 phy-mode = "rmii";
273 pinctrl-names = "default";
274 pinctrl-0 = <&mac1_pins_a>;
275 status = "okay";
276 };
277 };
278
279 regulators {
280 compatible = "simple-bus";
281 #address-cells = <1>;
282 #size-cells = <0>;
283
284 reg_3p3v: regulator@0 {
285 compatible = "regulator-fixed";
286 reg = <0>;
287 regulator-name = "3P3V";
288 regulator-min-microvolt = <3300000>;
289 regulator-max-microvolt = <3300000>;
290 regulator-always-on;
291 };
292
293 reg_vddio_sd0: regulator@1 {
294 compatible = "regulator-fixed";
295 reg = <1>;
296 regulator-name = "vddio-sd0";
297 regulator-min-microvolt = <3300000>;
298 regulator-max-microvolt = <3300000>;
299 gpio = <&gpio3 28 0>;
300 };
301
302 reg_fec_3v3: regulator@2 {
303 compatible = "regulator-fixed";
304 reg = <2>;
305 regulator-name = "fec-3v3";
306 regulator-min-microvolt = <3300000>;
307 regulator-max-microvolt = <3300000>;
308 gpio = <&gpio2 15 0>;
309 };
310
311 reg_usb0_vbus: regulator@3 {
312 compatible = "regulator-fixed";
313 reg = <3>;
314 regulator-name = "usb0_vbus";
315 regulator-min-microvolt = <5000000>;
316 regulator-max-microvolt = <5000000>;
317 gpio = <&gpio3 9 0>;
318 enable-active-high;
319 };
320
321 reg_usb1_vbus: regulator@4 {
322 compatible = "regulator-fixed";
323 reg = <4>;
324 regulator-name = "usb1_vbus";
325 regulator-min-microvolt = <5000000>;
326 regulator-max-microvolt = <5000000>;
327 gpio = <&gpio3 8 0>;
328 enable-active-high;
329 };
330
331 reg_lcd_3v3: regulator@5 {
332 compatible = "regulator-fixed";
333 reg = <5>;
334 regulator-name = "lcd-3v3";
335 regulator-min-microvolt = <3300000>;
336 regulator-max-microvolt = <3300000>;
337 gpio = <&gpio3 30 0>;
338 enable-active-high;
339 };
340
341 reg_can_3v3: regulator@6 {
342 compatible = "regulator-fixed";
343 reg = <6>;
344 regulator-name = "can-3v3";
345 regulator-min-microvolt = <3300000>;
346 regulator-max-microvolt = <3300000>;
347 gpio = <&gpio2 13 0>;
348 enable-active-high;
349 };
350
351 };
352
353 sound {
354 compatible = "fsl,imx28-evk-sgtl5000",
355 "fsl,mxs-audio-sgtl5000";
356 model = "imx28-evk-sgtl5000";
357 saif-controllers = <&saif0 &saif1>;
358 audio-codec = <&sgtl5000>;
359 };
360
361 leds {
362 compatible = "gpio-leds";
363 pinctrl-names = "default";
364 pinctrl-0 = <&led_pin_gpio3_5>;
365
366 user {
367 label = "Heartbeat";
368 gpios = <&gpio3 5 0>;
369 linux,default-trigger = "heartbeat";
370 };
371 };
372
373 backlight {
374 compatible = "pwm-backlight";
375 pwms = <&pwm 2 5000000>;
376 brightness-levels = <0 4 8 16 32 64 128 255>;
377 default-brightness-level = <6>;
378 };
379};
1/*
2 * Copyright 2012 Freescale Semiconductor, Inc.
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/dts-v1/;
13#include "imx28.dtsi"
14
15/ {
16 model = "Freescale i.MX28 Evaluation Kit";
17 compatible = "fsl,imx28-evk", "fsl,imx28";
18
19 memory {
20 reg = <0x40000000 0x08000000>;
21 };
22
23 apb@80000000 {
24 apbh@80000000 {
25 gpmi-nand@8000c000 {
26 pinctrl-names = "default";
27 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
28 &gpmi_pins_evk>;
29 status = "okay";
30 };
31
32 ssp0: ssp@80010000 {
33 compatible = "fsl,imx28-mmc";
34 pinctrl-names = "default";
35 pinctrl-0 = <&mmc0_8bit_pins_a
36 &mmc0_cd_cfg &mmc0_sck_cfg>;
37 bus-width = <8>;
38 wp-gpios = <&gpio2 12 0>;
39 vmmc-supply = <®_vddio_sd0>;
40 status = "okay";
41 };
42
43 ssp1: ssp@80012000 {
44 compatible = "fsl,imx28-mmc";
45 bus-width = <8>;
46 wp-gpios = <&gpio0 28 0>;
47 };
48
49 ssp2: ssp@80014000 {
50 #address-cells = <1>;
51 #size-cells = <0>;
52 compatible = "fsl,imx28-spi";
53 pinctrl-names = "default";
54 pinctrl-0 = <&spi2_pins_a>;
55 status = "okay";
56
57 flash: m25p80@0 {
58 #address-cells = <1>;
59 #size-cells = <1>;
60 compatible = "sst,sst25vf016b";
61 spi-max-frequency = <40000000>;
62 reg = <0>;
63 };
64 };
65
66 pinctrl@80018000 {
67 pinctrl-names = "default";
68 pinctrl-0 = <&hog_pins_a>;
69
70 hog_pins_a: hog@0 {
71 reg = <0>;
72 fsl,pinmux-ids = <
73 MX28_PAD_SSP1_CMD__GPIO_2_13
74 MX28_PAD_SSP1_DATA3__GPIO_2_15
75 MX28_PAD_ENET0_RX_CLK__GPIO_4_13
76 MX28_PAD_SSP1_SCK__GPIO_2_12
77 MX28_PAD_PWM3__GPIO_3_28
78 MX28_PAD_LCD_RESET__GPIO_3_30
79 MX28_PAD_AUART2_RX__GPIO_3_8
80 MX28_PAD_AUART2_TX__GPIO_3_9
81 >;
82 fsl,drive-strength = <MXS_DRIVE_4mA>;
83 fsl,voltage = <MXS_VOLTAGE_HIGH>;
84 fsl,pull-up = <MXS_PULL_DISABLE>;
85 };
86
87 led_pin_gpio3_5: led_gpio3_5@0 {
88 reg = <0>;
89 fsl,pinmux-ids = <
90 MX28_PAD_AUART1_TX__GPIO_3_5
91 >;
92 fsl,drive-strength = <MXS_DRIVE_4mA>;
93 fsl,voltage = <MXS_VOLTAGE_HIGH>;
94 fsl,pull-up = <MXS_PULL_DISABLE>;
95 };
96
97 gpmi_pins_evk: gpmi-nand-evk@0 {
98 reg = <0>;
99 fsl,pinmux-ids = <
100 MX28_PAD_GPMI_CE1N__GPMI_CE1N
101 MX28_PAD_GPMI_RDY1__GPMI_READY1
102 >;
103 fsl,drive-strength = <MXS_DRIVE_4mA>;
104 fsl,voltage = <MXS_VOLTAGE_HIGH>;
105 fsl,pull-up = <MXS_PULL_DISABLE>;
106 };
107
108 lcdif_pins_evk: lcdif-evk@0 {
109 reg = <0>;
110 fsl,pinmux-ids = <
111 MX28_PAD_LCD_RD_E__LCD_VSYNC
112 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
113 MX28_PAD_LCD_RS__LCD_DOTCLK
114 MX28_PAD_LCD_CS__LCD_ENABLE
115 >;
116 fsl,drive-strength = <MXS_DRIVE_4mA>;
117 fsl,voltage = <MXS_VOLTAGE_HIGH>;
118 fsl,pull-up = <MXS_PULL_DISABLE>;
119 };
120 };
121
122 lcdif@80030000 {
123 pinctrl-names = "default";
124 pinctrl-0 = <&lcdif_24bit_pins_a
125 &lcdif_pins_evk>;
126 lcd-supply = <®_lcd_3v3>;
127 display = <&display>;
128 status = "okay";
129
130 display: display {
131 bits-per-pixel = <32>;
132 bus-width = <24>;
133
134 display-timings {
135 native-mode = <&timing0>;
136 timing0: timing0 {
137 clock-frequency = <33500000>;
138 hactive = <800>;
139 vactive = <480>;
140 hback-porch = <89>;
141 hfront-porch = <164>;
142 vback-porch = <23>;
143 vfront-porch = <10>;
144 hsync-len = <10>;
145 vsync-len = <10>;
146 hsync-active = <0>;
147 vsync-active = <0>;
148 de-active = <1>;
149 pixelclk-active = <0>;
150 };
151 };
152 };
153 };
154
155 can0: can@80032000 {
156 pinctrl-names = "default";
157 pinctrl-0 = <&can0_pins_a>;
158 xceiver-supply = <®_can_3v3>;
159 status = "okay";
160 };
161
162 can1: can@80034000 {
163 pinctrl-names = "default";
164 pinctrl-0 = <&can1_pins_a>;
165 xceiver-supply = <®_can_3v3>;
166 status = "okay";
167 };
168 };
169
170 apbx@80040000 {
171 saif0: saif@80042000 {
172 pinctrl-names = "default";
173 pinctrl-0 = <&saif0_pins_a>;
174 status = "okay";
175 };
176
177 saif1: saif@80046000 {
178 pinctrl-names = "default";
179 pinctrl-0 = <&saif1_pins_a>;
180 fsl,saif-master = <&saif0>;
181 status = "okay";
182 };
183
184 lradc@80050000 {
185 fsl,lradc-touchscreen-wires = <4>;
186 status = "okay";
187 fsl,lradc-touchscreen-wires = <4>;
188 fsl,ave-ctrl = <4>;
189 fsl,ave-delay = <2>;
190 fsl,settling = <10>;
191 };
192
193 i2c0: i2c@80058000 {
194 pinctrl-names = "default";
195 pinctrl-0 = <&i2c0_pins_a>;
196 clock-frequency = <400000>;
197 status = "okay";
198
199 sgtl5000: codec@0a {
200 compatible = "fsl,sgtl5000";
201 reg = <0x0a>;
202 VDDA-supply = <®_3p3v>;
203 VDDIO-supply = <®_3p3v>;
204 clocks = <&saif0>;
205 };
206
207 at24@51 {
208 compatible = "at24,24c32";
209 pagesize = <32>;
210 reg = <0x51>;
211 };
212 };
213
214 pwm: pwm@80064000 {
215 pinctrl-names = "default";
216 pinctrl-0 = <&pwm2_pins_a>;
217 status = "okay";
218 };
219
220 duart: serial@80074000 {
221 pinctrl-names = "default";
222 pinctrl-0 = <&duart_pins_a>;
223 status = "okay";
224 };
225
226 auart0: serial@8006a000 {
227 pinctrl-names = "default";
228 pinctrl-0 = <&auart0_pins_a>;
229 fsl,uart-has-rtscts;
230 status = "okay";
231 };
232
233 auart3: serial@80070000 {
234 pinctrl-names = "default";
235 pinctrl-0 = <&auart3_pins_a>;
236 status = "okay";
237 };
238
239 usbphy0: usbphy@8007c000 {
240 status = "okay";
241 };
242
243 usbphy1: usbphy@8007e000 {
244 status = "okay";
245 };
246 };
247 };
248
249 ahb@80080000 {
250 usb0: usb@80080000 {
251 pinctrl-names = "default";
252 pinctrl-0 = <&usb0_id_pins_a>;
253 vbus-supply = <®_usb0_vbus>;
254 status = "okay";
255 };
256
257 usb1: usb@80090000 {
258 vbus-supply = <®_usb1_vbus>;
259 status = "okay";
260 };
261
262 mac0: ethernet@800f0000 {
263 phy-mode = "rmii";
264 pinctrl-names = "default";
265 pinctrl-0 = <&mac0_pins_a>;
266 phy-supply = <®_fec_3v3>;
267 phy-reset-gpios = <&gpio4 13 0>;
268 phy-reset-duration = <100>;
269 status = "okay";
270 };
271
272 mac1: ethernet@800f4000 {
273 phy-mode = "rmii";
274 pinctrl-names = "default";
275 pinctrl-0 = <&mac1_pins_a>;
276 status = "okay";
277 };
278 };
279
280 regulators {
281 compatible = "simple-bus";
282 #address-cells = <1>;
283 #size-cells = <0>;
284
285 reg_3p3v: regulator@0 {
286 compatible = "regulator-fixed";
287 reg = <0>;
288 regulator-name = "3P3V";
289 regulator-min-microvolt = <3300000>;
290 regulator-max-microvolt = <3300000>;
291 regulator-always-on;
292 };
293
294 reg_vddio_sd0: regulator@1 {
295 compatible = "regulator-fixed";
296 reg = <1>;
297 regulator-name = "vddio-sd0";
298 regulator-min-microvolt = <3300000>;
299 regulator-max-microvolt = <3300000>;
300 gpio = <&gpio3 28 0>;
301 };
302
303 reg_fec_3v3: regulator@2 {
304 compatible = "regulator-fixed";
305 reg = <2>;
306 regulator-name = "fec-3v3";
307 regulator-min-microvolt = <3300000>;
308 regulator-max-microvolt = <3300000>;
309 gpio = <&gpio2 15 0>;
310 };
311
312 reg_usb0_vbus: regulator@3 {
313 compatible = "regulator-fixed";
314 reg = <3>;
315 regulator-name = "usb0_vbus";
316 regulator-min-microvolt = <5000000>;
317 regulator-max-microvolt = <5000000>;
318 gpio = <&gpio3 9 0>;
319 enable-active-high;
320 };
321
322 reg_usb1_vbus: regulator@4 {
323 compatible = "regulator-fixed";
324 reg = <4>;
325 regulator-name = "usb1_vbus";
326 regulator-min-microvolt = <5000000>;
327 regulator-max-microvolt = <5000000>;
328 gpio = <&gpio3 8 0>;
329 enable-active-high;
330 };
331
332 reg_lcd_3v3: regulator@5 {
333 compatible = "regulator-fixed";
334 reg = <5>;
335 regulator-name = "lcd-3v3";
336 regulator-min-microvolt = <3300000>;
337 regulator-max-microvolt = <3300000>;
338 gpio = <&gpio3 30 0>;
339 enable-active-high;
340 };
341
342 reg_can_3v3: regulator@6 {
343 compatible = "regulator-fixed";
344 reg = <6>;
345 regulator-name = "can-3v3";
346 regulator-min-microvolt = <3300000>;
347 regulator-max-microvolt = <3300000>;
348 gpio = <&gpio2 13 0>;
349 enable-active-high;
350 };
351
352 };
353
354 sound {
355 compatible = "fsl,imx28-evk-sgtl5000",
356 "fsl,mxs-audio-sgtl5000";
357 model = "imx28-evk-sgtl5000";
358 saif-controllers = <&saif0 &saif1>;
359 audio-codec = <&sgtl5000>;
360 };
361
362 leds {
363 compatible = "gpio-leds";
364 pinctrl-names = "default";
365 pinctrl-0 = <&led_pin_gpio3_5>;
366
367 user {
368 label = "Heartbeat";
369 gpios = <&gpio3 5 0>;
370 linux,default-trigger = "heartbeat";
371 };
372 };
373
374 backlight {
375 compatible = "pwm-backlight";
376 pwms = <&pwm 2 5000000>;
377 brightness-levels = <0 4 8 16 32 64 128 255>;
378 default-brightness-level = <6>;
379 };
380};