1/*
 2 * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
 3 *
 4 * Copyright (C) 2012 Telit,
 5 *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
 6 *
 7 * Licensed under GPLv2 or later.
 8 */
 9
10#include "at91sam9260.dtsi"
11
12/ {
13	clocks {
14		main_xtal {
 
 
 
 
 
15			clock-frequency = <6000000>;
16		};
17	};
18
19	ahb {
20		apb {
21			tcb0: timer@fffa0000 {
22				timer@0 {
23					compatible = "atmel,tcb-timer";
24					reg = <0>, <1>;
25				};
26
27				timer@2 {
28					compatible = "atmel,tcb-timer";
29					reg = <2>;
30				};
31			};
32
33			dbgu: serial@fffff200 {
34				status = "okay";
35			};
36		};
37
38		ebi: ebi@10000000 {
 
 
 
39			status = "okay";
40
41			nand_controller: nand-controller {
42				status = "okay";
43				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
44				pinctrl-names = "default";
45
46				nand@3 {
47					reg = <0x3 0x0 0x800000>;
48					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
49					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
50					nand-bus-width = <8>;
51					nand-ecc-mode = "soft";
52					nand-on-flash-bbt;
53					label = "atmel_nand";
54
55					partitions {
56						compatible = "fixed-partitions";
57						#address-cells = <1>;
58						#size-cells = <1>;
59
60						boot@0 {
61							label = "boot";
62							reg = <0x0 0x7c0000>;
63						};
64
65						root@7c0000 {
66							label = "root";
67							reg = <0x7c0000 0x7840000>;
68						};
69					};
70				};
71			};
72		};
73	};
74
75	chosen {
76		bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
77	};
78};

 1/*
 2 * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
 3 *
 4 * Copyright (C) 2012 Telit,
 5 *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
 6 *
 7 * Licensed under GPLv2 or later.
 8 */
 9
10#include "at91sam9260.dtsi"
11
12/ {
13	clocks {
14		#address-cells = <1>;
15		#size-cells = <1>;
16		ranges;
17
18		main_clock: clock@0 {
19			compatible = "atmel,osc", "fixed-clock";
20			clock-frequency = <6000000>;
21		};
22	};
23
24	ahb {
25		apb {
 
 
 
 
 
 
 
 
 
 
 
 
26			dbgu: serial@fffff200 {
27				status = "okay";
28			};
29		};
30
31		nand0: nand@40000000 {
32			nand-bus-width = <8>;
33			nand-ecc-mode = "soft";
34			nand-on-flash-bbt;
35			status = "okay";
36
37			boot@0 {
38				label = "boot";
39				reg = <0x0 0x7c0000>;
40			};
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
41
42			root@07c0000 {
43				label = "root";
44				reg = <0x7c0000 0x7840000>;
 
 
 
45			};
46		};
47	};
48
49	chosen {
50		bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
51	};
52};