Loading...
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "dove.dtsi"
5
6/ {
7 model = "Globalscale D3Plug";
8 compatible = "globalscale,d3plug", "marvell,dove";
9
10 memory {
11 device_type = "memory";
12 reg = <0x00000000 0x40000000>;
13 };
14
15 chosen {
16 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
17 };
18
19 leds {
20 compatible = "gpio-leds";
21 pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
22 pinctrl-names = "default";
23
24 wlan-act {
25 label = "wlan-act";
26 gpios = <&gpio0 0 1>;
27 };
28
29 wlan-ap {
30 label = "wlan-ap";
31 gpios = <&gpio0 1 1>;
32 };
33
34 status {
35 label = "status";
36 gpios = <&gpio0 2 1>;
37 };
38 };
39
40 regulators {
41 compatible = "simple-bus";
42 #address-cells = <1>;
43 #size-cells = <0>;
44
45 usb_power: regulator@1 {
46 compatible = "regulator-fixed";
47 reg = <1>;
48 regulator-name = "USB Power";
49 regulator-min-microvolt = <5000000>;
50 regulator-max-microvolt = <5000000>;
51 enable-active-high;
52 regulator-always-on;
53 regulator-boot-on;
54 gpio = <&gpio0 8 0>;
55 pinctrl-0 = <&pmx_gpio_8>;
56 pinctrl-names = "default";
57 };
58 };
59};
60
61&uart0 { status = "okay"; };
62&sata0 { status = "okay"; };
63&i2c0 { status = "okay"; };
64
65/* Samsung M8G2F eMMC */
66&sdio0 {
67 status = "okay";
68 non-removable;
69 bus-width = <4>;
70};
71
72/* Marvell SD8787 WLAN/BT */
73&sdio1 {
74 status = "okay";
75 non-removable;
76};
77
78&spi0 {
79 status = "okay";
80
81 /* spi0.0: 2M Flash Macronix MX25L1605D */
82 spi-flash@0 {
83 compatible = "st,m25l1605d";
84 spi-max-frequency = <86000000>;
85 reg = <0>;
86 };
87};
88
89&pcie {
90 status = "okay";
91 /* Fresco Logic USB3.0 xHCI controller */
92 pcie@1 {
93 status = "okay";
94 reset-gpios = <&gpio0 26 1>;
95 reset-delay-us = <20000>;
96 pinctrl-0 = <&pmx_camera_gpio>;
97 pinctrl-names = "default";
98 };
99 /* Mini-PCIe slot */
100 pcie@2 {
101 status = "okay";
102 reset-gpios = <&gpio0 25 1>;
103 };
104};
1/dts-v1/;
2
3#include "dove.dtsi"
4
5/ {
6 model = "Globalscale D3Plug";
7 compatible = "globalscale,d3plug", "marvell,dove";
8
9 memory {
10 device_type = "memory";
11 reg = <0x00000000 0x40000000>;
12 };
13
14 chosen {
15 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
16 };
17
18 leds {
19 compatible = "gpio-leds";
20 pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
21 pinctrl-names = "default";
22
23 wlan-act {
24 label = "wlan-act";
25 gpios = <&gpio0 0 1>;
26 };
27
28 wlan-ap {
29 label = "wlan-ap";
30 gpios = <&gpio0 1 1>;
31 };
32
33 status {
34 label = "status";
35 gpios = <&gpio0 2 1>;
36 };
37 };
38
39 regulators {
40 compatible = "simple-bus";
41 #address-cells = <1>;
42 #size-cells = <0>;
43
44 usb_power: regulator@1 {
45 compatible = "regulator-fixed";
46 reg = <1>;
47 regulator-name = "USB Power";
48 regulator-min-microvolt = <5000000>;
49 regulator-max-microvolt = <5000000>;
50 enable-active-high;
51 regulator-always-on;
52 regulator-boot-on;
53 gpio = <&gpio0 8 0>;
54 pinctrl-0 = <&pmx_gpio_8>;
55 pinctrl-names = "default";
56 };
57 };
58};
59
60&uart0 { status = "okay"; };
61&sata0 { status = "okay"; };
62&i2c0 { status = "okay"; };
63
64/* Samsung M8G2F eMMC */
65&sdio0 {
66 status = "okay";
67 non-removable;
68 bus-width = <4>;
69};
70
71/* Marvell SD8787 WLAN/BT */
72&sdio1 {
73 status = "okay";
74 non-removable;
75};
76
77&spi0 {
78 status = "okay";
79
80 /* spi0.0: 2M Flash Macronix MX25L1605D */
81 spi-flash@0 {
82 compatible = "st,m25l1605d";
83 spi-max-frequency = <86000000>;
84 reg = <0>;
85 };
86};
87
88&pcie {
89 status = "okay";
90 /* Fresco Logic USB3.0 xHCI controller */
91 pcie-port@0 {
92 status = "okay";
93 reset-gpios = <&gpio0 26 1>;
94 reset-delay-us = <20000>;
95 pinctrl-0 = <&pmx_camera_gpio>;
96 pinctrl-names = "default";
97 };
98 /* Mini-PCIe slot */
99 pcie-port@1 {
100 status = "okay";
101 reset-gpios = <&gpio0 25 1>;
102 };
103};