Loading...
1/*
2 * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
3 *
4 * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5 *
6 * Licensed under GPLv2 only.
7 */
8
9/dts-v1/;
10#include "at91sam9260.dtsi"
11
12/ {
13 model = "Somfy Animeo IP";
14 compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
15
16 aliases {
17 serial0 = &usart1;
18 serial1 = &usart2;
19 serial2 = &usart0;
20 serial3 = &dbgu;
21 serial4 = &usart3;
22 serial5 = &uart0;
23 serial6 = &uart1;
24 };
25
26 chosen {
27 stdout-path = &usart2;
28 };
29
30 memory {
31 reg = <0x20000000 0x4000000>;
32 };
33
34 clocks {
35 slow_xtal {
36 clock-frequency = <32768>;
37 };
38
39 main_xtal {
40 clock-frequency = <18432000>;
41 };
42 };
43
44 ahb {
45 apb {
46 tcb0: timer@fffa0000 {
47 timer@0 {
48 compatible = "atmel,tcb-timer";
49 reg = <0>, <1>;
50 };
51
52 timer@2 {
53 compatible = "atmel,tcb-timer";
54 reg = <2>;
55 };
56 };
57
58 usart0: serial@fffb0000 {
59 pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
60 linux,rs485-enabled-at-boot-time;
61 status = "okay";
62 };
63
64 usart1: serial@fffb4000 {
65 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
66 linux,rs485-enabled-at-boot-time;
67 status = "okay";
68 };
69
70 usart2: serial@fffb8000 {
71 pinctrl-0 = <&pinctrl_usart2>;
72 status = "okay";
73 };
74
75 macb0: ethernet@fffc4000 {
76 pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
77 phy-mode = "mii";
78 status = "okay";
79 };
80
81 mmc0: mmc@fffa8000 {
82 pinctrl-0 = <&pinctrl_mmc0_clk
83 &pinctrl_mmc0_slot1_cmd_dat0
84 &pinctrl_mmc0_slot1_dat1_3>;
85 status = "okay";
86
87 slot@1 {
88 reg = <1>;
89 bus-width = <4>;
90 };
91 };
92
93 watchdog@fffffd40 {
94 status = "okay";
95 };
96 };
97
98 ebi: ebi@10000000 {
99 status = "okay";
100
101 nand_controller: nand-controller {
102 status = "okay";
103 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
104 pinctrl-names = "default";
105
106 nand@3 {
107 reg = <0x3 0x0 0x800000>;
108 rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
109 cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
110 nand-bus-width = <8>;
111 nand-ecc-mode = "soft";
112 nand-on-flash-bbt;
113 label = "atmel_nand";
114
115 partitions {
116 compatible = "fixed-partitions";
117 #address-cells = <1>;
118 #size-cells = <1>;
119
120 barebox@0 {
121 label = "barebox";
122 reg = <0x0 0x58000>;
123 };
124
125 u_boot_env@58000 {
126 label = "u_boot_env";
127 reg = <0x58000 0x8000>;
128 };
129
130 ubi@60000 {
131 label = "ubi";
132 reg = <0x60000 0x1FA0000>;
133 };
134 };
135 };
136 };
137 };
138
139 usb0: ohci@500000 {
140 num-ports = <2>;
141 atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
142 status = "okay";
143 };
144 };
145
146 leds {
147 compatible = "gpio-leds";
148
149 power_green {
150 label = "power_green";
151 gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
152 linux,default-trigger = "heartbeat";
153 };
154
155 power_red {
156 label = "power_red";
157 gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
158 };
159
160 tx_green {
161 label = "tx_green";
162 gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
163 };
164
165 tx_red {
166 label = "tx_red";
167 gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
168 };
169 };
170
171 gpio_keys {
172 compatible = "gpio-keys";
173 #address-cells = <1>;
174 #size-cells = <0>;
175
176 keyswitch_in {
177 label = "keyswitch_in";
178 gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
179 linux,code = <28>;
180 wakeup-source;
181 };
182
183 error_in {
184 label = "error_in";
185 gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
186 linux,code = <29>;
187 wakeup-source;
188 };
189
190 btn {
191 label = "btn";
192 gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
193 linux,code = <31>;
194 wakeup-source;
195 };
196 };
197};
1/*
2 * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
3 *
4 * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5 *
6 * Licensed under GPLv2 only.
7 */
8
9/dts-v1/;
10#include "at91sam9260.dtsi"
11
12/ {
13 model = "Somfy Animeo IP";
14 compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
15
16 aliases {
17 serial0 = &usart1;
18 serial1 = &usart2;
19 serial2 = &usart0;
20 serial3 = &dbgu;
21 serial4 = &usart3;
22 serial5 = &uart0;
23 serial6 = &uart1;
24 };
25
26 chosen {
27 linux,stdout-path = &usart2;
28 };
29
30 memory {
31 reg = <0x20000000 0x4000000>;
32 };
33
34 clocks {
35 #address-cells = <1>;
36 #size-cells = <1>;
37 ranges;
38
39 main_clock: clock@0 {
40 compatible = "atmel,osc", "fixed-clock";
41 clock-frequency = <18432000>;
42 };
43 };
44
45 ahb {
46 apb {
47 usart0: serial@fffb0000 {
48 pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
49 linux,rs485-enabled-at-boot-time;
50 status = "okay";
51 };
52
53 usart1: serial@fffb4000 {
54 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
55 linux,rs485-enabled-at-boot-time;
56 status = "okay";
57 };
58
59 usart2: serial@fffb8000 {
60 pinctrl-0 = <&pinctrl_usart2>;
61 status = "okay";
62 };
63
64 macb0: ethernet@fffc4000 {
65 pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
66 phy-mode = "mii";
67 status = "okay";
68 };
69
70 mmc0: mmc@fffa8000 {
71 pinctrl-0 = <&pinctrl_mmc0_clk
72 &pinctrl_mmc0_slot1_cmd_dat0
73 &pinctrl_mmc0_slot1_dat1_3>;
74 status = "okay";
75
76 slot@1 {
77 reg = <1>;
78 bus-width = <4>;
79 };
80 };
81
82 watchdog@fffffd40 {
83 status = "okay";
84 };
85 };
86
87 nand0: nand@40000000 {
88 nand-bus-width = <8>;
89 nand-ecc-mode = "soft";
90 nand-on-flash-bbt;
91 status = "okay";
92
93 barebox@0 {
94 label = "barebox";
95 reg = <0x0 0x58000>;
96 };
97
98 u_boot_env@58000 {
99 label = "u_boot_env";
100 reg = <0x58000 0x8000>;
101 };
102
103 ubi@60000 {
104 label = "ubi";
105 reg = <0x60000 0x1FA0000>;
106 };
107 };
108
109 usb0: ohci@00500000 {
110 num-ports = <2>;
111 atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
112 status = "okay";
113 };
114 };
115
116 leds {
117 compatible = "gpio-leds";
118
119 power_green {
120 label = "power_green";
121 gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
122 linux,default-trigger = "heartbeat";
123 };
124
125 power_red {
126 label = "power_red";
127 gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
128 };
129
130 tx_green {
131 label = "tx_green";
132 gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
133 };
134
135 tx_red {
136 label = "tx_red";
137 gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
138 };
139 };
140
141 gpio_keys {
142 compatible = "gpio-keys";
143 #address-cells = <1>;
144 #size-cells = <0>;
145
146 keyswitch_in {
147 label = "keyswitch_in";
148 gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
149 linux,code = <28>;
150 gpio-key,wakeup;
151 };
152
153 error_in {
154 label = "error_in";
155 gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
156 linux,code = <29>;
157 gpio-key,wakeup;
158 };
159
160 btn {
161 label = "btn";
162 gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
163 linux,code = <31>;
164 gpio-key,wakeup;
165 };
166 };
167};