1/*
  2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
  3 *
  4 * This program is free software; you can redistribute it and/or modify
  5 * it under the terms of the GNU General Public License version 2 as
  6 * published by the Free Software Foundation.
  7 */
  8
  9/*
 10 * VScom OnRISC
 11 * http://www.vscom.de
 12 */
 13
 14/dts-v1/;
 15
 16#include "am335x-baltos.dtsi"
 17#include "am335x-baltos-leds.dtsi"
 18
 19/ {
 20	model = "OnRISC Baltos iR 5221";
 21};
 22
 23&am33xx_pinmux {
 24	tca6416_pins: pinmux_tca6416_pins {
 25		pinctrl-single,pins = <
 26			AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
 27		>;
 28	};
 29
 30
 31	dcan1_pins: pinmux_dcan1_pins {
 32		pinctrl-single,pins = <
 33			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
 34			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
 35		>;
 36	};
 37
 38	uart1_pins: pinmux_uart1_pins {
 39		pinctrl-single,pins = <
 40			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
 41			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
 42			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
 43			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
 44			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
 45			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
 46			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
 47			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
 48		>;
 49	};
 50
 51	uart2_pins: pinmux_uart2_pins {
 52		pinctrl-single,pins = <
 53			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
 54			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
 55			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
 56			AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
 57			AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
 58			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
 59			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
 60			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
 61
 62			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
 63		>;
 64	};
 65
 66};
 67
 68&uart1 {
 69	pinctrl-names = "default";
 70	pinctrl-0 = <&uart1_pins>;
 71	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 72	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 73	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
 74	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
 75
 76	status = "okay";
 77};
 78
 79&uart2 {
 80	pinctrl-names = "default";
 81	pinctrl-0 = <&uart2_pins>;
 82	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 83	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 84	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 85	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 86
 87	status = "okay";
 88};
 89
 90&i2c1 {
 91	tca6416: gpio@20 {
 92		compatible = "ti,tca6416";
 93		reg = <0x20>;
 94		gpio-controller;
 95		#gpio-cells = <2>;
 96		interrupt-parent = <&gpio0>;
 97		interrupts = <20 GPIO_ACTIVE_LOW>;
 98		pinctrl-names = "default";
 99		pinctrl-0 = <&tca6416_pins>;
100	};
101};
102
103&usb0_phy {
104	status = "okay";
105};
106
107&usb1_phy {
108	status = "okay";
109};
110
111&usb0 {
112	status = "okay";
113	dr_mode = "host";
114};
115
116&usb1 {
117	status = "okay";
118	dr_mode = "host";
119};
120
121&cpsw_emac0 {
122	phy-mode = "rmii";
123	dual_emac_res_vlan = <1>;
124	fixed-link {
125		speed = <100>;
126		full-duplex;
127	};
128};
129
130&cpsw_emac1 {
131	phy-mode = "rgmii-txid";
132	dual_emac_res_vlan = <2>;
133	phy-handle = <&phy1>;
134};
135
136&phy_sel {
137	rmii-clock-ext = <1>;
138};
139
140&dcan1 {
141	pinctrl-names = "default";
142	pinctrl-0 = <&dcan1_pins>;
143
144	status = "okay";
145};