Loading...
1/*
2 * Idle daemon for PowerPC. Idle daemon will handle any action
3 * that needs to be taken when the system becomes idle.
4 *
5 * Originally written by Cort Dougan (cort@cs.nmt.edu).
6 * Subsequent 32-bit hacking by Tom Rini, Armin Kuster,
7 * Paul Mackerras and others.
8 *
9 * iSeries supported added by Mike Corrigan <mikejc@us.ibm.com>
10 *
11 * Additional shared processor, SMT, and firmware support
12 * Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com>
13 *
14 * 32-bit and 64-bit versions merged by Paul Mackerras <paulus@samba.org>
15 *
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License
18 * as published by the Free Software Foundation; either version
19 * 2 of the License, or (at your option) any later version.
20 */
21
22#include <linux/sched.h>
23#include <linux/kernel.h>
24#include <linux/smp.h>
25#include <linux/cpu.h>
26#include <linux/sysctl.h>
27#include <linux/tick.h>
28
29#include <asm/processor.h>
30#include <asm/cputable.h>
31#include <asm/time.h>
32#include <asm/machdep.h>
33#include <asm/runlatch.h>
34#include <asm/smp.h>
35
36
37unsigned long cpuidle_disable = IDLE_NO_OVERRIDE;
38EXPORT_SYMBOL(cpuidle_disable);
39
40static int __init powersave_off(char *arg)
41{
42 ppc_md.power_save = NULL;
43 cpuidle_disable = IDLE_POWERSAVE_OFF;
44 return 0;
45}
46__setup("powersave=off", powersave_off);
47
48#ifdef CONFIG_HOTPLUG_CPU
49void arch_cpu_idle_dead(void)
50{
51 sched_preempt_enable_no_resched();
52 cpu_die();
53}
54#endif
55
56void arch_cpu_idle(void)
57{
58 ppc64_runlatch_off();
59
60 if (ppc_md.power_save) {
61 ppc_md.power_save();
62 /*
63 * Some power_save functions return with
64 * interrupts enabled, some don't.
65 */
66 if (irqs_disabled())
67 local_irq_enable();
68 } else {
69 local_irq_enable();
70 /*
71 * Go into low thread priority and possibly
72 * low power mode.
73 */
74 HMT_low();
75 HMT_very_low();
76 }
77
78 HMT_medium();
79 ppc64_runlatch_on();
80}
81
82int powersave_nap;
83
84#ifdef CONFIG_SYSCTL
85/*
86 * Register the sysctl to set/clear powersave_nap.
87 */
88static struct ctl_table powersave_nap_ctl_table[] = {
89 {
90 .procname = "powersave-nap",
91 .data = &powersave_nap,
92 .maxlen = sizeof(int),
93 .mode = 0644,
94 .proc_handler = proc_dointvec,
95 },
96 {}
97};
98static struct ctl_table powersave_nap_sysctl_root[] = {
99 {
100 .procname = "kernel",
101 .mode = 0555,
102 .child = powersave_nap_ctl_table,
103 },
104 {}
105};
106
107static int __init
108register_powersave_nap_sysctl(void)
109{
110 register_sysctl_table(powersave_nap_sysctl_root);
111
112 return 0;
113}
114__initcall(register_powersave_nap_sysctl);
115#endif
1/*
2 * Idle daemon for PowerPC. Idle daemon will handle any action
3 * that needs to be taken when the system becomes idle.
4 *
5 * Originally written by Cort Dougan (cort@cs.nmt.edu).
6 * Subsequent 32-bit hacking by Tom Rini, Armin Kuster,
7 * Paul Mackerras and others.
8 *
9 * iSeries supported added by Mike Corrigan <mikejc@us.ibm.com>
10 *
11 * Additional shared processor, SMT, and firmware support
12 * Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com>
13 *
14 * 32-bit and 64-bit versions merged by Paul Mackerras <paulus@samba.org>
15 *
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License
18 * as published by the Free Software Foundation; either version
19 * 2 of the License, or (at your option) any later version.
20 */
21
22#include <linux/sched.h>
23#include <linux/kernel.h>
24#include <linux/smp.h>
25#include <linux/cpu.h>
26#include <linux/sysctl.h>
27#include <linux/tick.h>
28
29#include <asm/processor.h>
30#include <asm/cputable.h>
31#include <asm/time.h>
32#include <asm/machdep.h>
33#include <asm/runlatch.h>
34#include <asm/smp.h>
35
36
37unsigned long cpuidle_disable = IDLE_NO_OVERRIDE;
38EXPORT_SYMBOL(cpuidle_disable);
39
40static int __init powersave_off(char *arg)
41{
42 ppc_md.power_save = NULL;
43 cpuidle_disable = IDLE_POWERSAVE_OFF;
44 return 0;
45}
46__setup("powersave=off", powersave_off);
47
48#ifdef CONFIG_HOTPLUG_CPU
49void arch_cpu_idle_dead(void)
50{
51 sched_preempt_enable_no_resched();
52 cpu_die();
53}
54#endif
55
56void arch_cpu_idle(void)
57{
58 ppc64_runlatch_off();
59
60 if (ppc_md.power_save) {
61 ppc_md.power_save();
62 /*
63 * Some power_save functions return with
64 * interrupts enabled, some don't.
65 */
66 if (irqs_disabled())
67 local_irq_enable();
68 } else {
69 local_irq_enable();
70 /*
71 * Go into low thread priority and possibly
72 * low power mode.
73 */
74 HMT_low();
75 HMT_very_low();
76 }
77
78 HMT_medium();
79 ppc64_runlatch_on();
80}
81
82int powersave_nap;
83
84#ifdef CONFIG_SYSCTL
85/*
86 * Register the sysctl to set/clear powersave_nap.
87 */
88static struct ctl_table powersave_nap_ctl_table[] = {
89 {
90 .procname = "powersave-nap",
91 .data = &powersave_nap,
92 .maxlen = sizeof(int),
93 .mode = 0644,
94 .proc_handler = proc_dointvec,
95 },
96 {}
97};
98static struct ctl_table powersave_nap_sysctl_root[] = {
99 {
100 .procname = "kernel",
101 .mode = 0555,
102 .child = powersave_nap_ctl_table,
103 },
104 {}
105};
106
107static int __init
108register_powersave_nap_sysctl(void)
109{
110 register_sysctl_table(powersave_nap_sysctl_root);
111
112 return 0;
113}
114__initcall(register_powersave_nap_sysctl);
115#endif