Linux Audio

Check our new training course

Loading...
v4.17
  1/*
  2 * This interface is used for compatibility with old U-boots *ONLY*.
  3 * Please do not imitate or extend this.
  4 */
  5
  6/*
  7 * (C) Copyright 2000, 2001
  8 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  9 *
 10 * This program is free software; you can redistribute it and/or
 11 * modify it under the terms of the GNU General Public License as
 12 * published by the Free Software Foundation; either version 2 of
 13 * the License, or (at your option) any later version.
 14 *
 15 * This program is distributed in the hope that it will be useful,
 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 18 * GNU General Public License for more details.
 19 *
 20 * You should have received a copy of the GNU General Public License
 21 * along with this program; if not, write to the Free Software
 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 23 * MA 02111-1307 USA
 24 */
 25
 26#ifndef __PPCBOOT_H__
 27#define __PPCBOOT_H__
 28
 29/*
 30 * Board information passed to kernel from PPCBoot
 31 *
 32 * include/asm-ppc/ppcboot.h
 33 */
 34
 35#include "types.h"
 36
 37typedef struct bd_info {
 38	unsigned long	bi_memstart;	/* start of DRAM memory */
 39	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
 40	unsigned long	bi_flashstart;	/* start of FLASH memory */
 41	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
 42	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
 43	unsigned long	bi_sramstart;	/* start of SRAM memory */
 44	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
 45#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
 46	defined(TARGET_83xx) || defined(TARGET_86xx)
 47	unsigned long	bi_immr_base;	/* base of IMMR register */
 48#endif
 49#if defined(TARGET_PPC_MPC52xx)
 50	unsigned long   bi_mbar_base;   /* base of internal registers */
 51#endif
 52	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
 53	unsigned long	bi_ip_addr;	/* IP Address */
 54	unsigned char	bi_enetaddr[6];	/* Ethernet address */
 55	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
 56	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
 57	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
 58#if defined(TARGET_CPM2)
 59	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */
 60	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */
 61	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */
 62	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */
 63#endif
 64#if defined(TARGET_PPC_MPC52xx)
 65	unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
 66	unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
 67#endif
 68	unsigned long	bi_baudrate;	/* Console Baudrate */
 69#if defined(TARGET_4xx)
 70	unsigned char	bi_s_version[4];	/* Version of this structure */
 71	unsigned char	bi_r_version[32];	/* Version of the ROM (IBM) */
 72	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
 73	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */
 74	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
 75	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
 76#endif
 77#if defined(TARGET_HYMOD)
 78	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
 79#endif
 80#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \
 81	defined(TARGET_85xx) ||	defined(TARGET_83xx) || defined(TARGET_HAS_ETH1)
 82	/* second onboard ethernet port */
 83	unsigned char	bi_enet1addr[6];
 84#define HAVE_ENET1ADDR
 85#endif
 86#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \
 87    defined(TARGET_85xx) || defined(TARGET_HAS_ETH2)
 88	/* third onboard ethernet ports */
 89	unsigned char	bi_enet2addr[6];
 90#define HAVE_ENET2ADDR
 91#endif
 92#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3)
 93	/* fourth onboard ethernet ports */
 94	unsigned char	bi_enet3addr[6];
 95#define HAVE_ENET3ADDR
 96#endif
 97#if defined(TARGET_4xx)
 98	unsigned int	bi_opbfreq;		/* OB clock in Hz */
 99	int		bi_iic_fast[2];		/* Use fast i2c mode */
100#endif
101#if defined(TARGET_440GX)
102	int		bi_phynum[4];		/* phy mapping */
103	int		bi_phymode[4];		/* phy mode */
104#endif
105} bd_t;
106
107#define bi_tbfreq	bi_intfreq
108
109#endif	/* __PPCBOOT_H__ */
v3.1
  1/*
  2 * This interface is used for compatibility with old U-boots *ONLY*.
  3 * Please do not imitate or extend this.
  4 */
  5
  6/*
  7 * (C) Copyright 2000, 2001
  8 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  9 *
 10 * This program is free software; you can redistribute it and/or
 11 * modify it under the terms of the GNU General Public License as
 12 * published by the Free Software Foundation; either version 2 of
 13 * the License, or (at your option) any later version.
 14 *
 15 * This program is distributed in the hope that it will be useful,
 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 18 * GNU General Public License for more details.
 19 *
 20 * You should have received a copy of the GNU General Public License
 21 * along with this program; if not, write to the Free Software
 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 23 * MA 02111-1307 USA
 24 */
 25
 26#ifndef __PPCBOOT_H__
 27#define __PPCBOOT_H__
 28
 29/*
 30 * Board information passed to kernel from PPCBoot
 31 *
 32 * include/asm-ppc/ppcboot.h
 33 */
 34
 35#include "types.h"
 36
 37typedef struct bd_info {
 38	unsigned long	bi_memstart;	/* start of DRAM memory */
 39	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
 40	unsigned long	bi_flashstart;	/* start of FLASH memory */
 41	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
 42	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
 43	unsigned long	bi_sramstart;	/* start of SRAM memory */
 44	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
 45#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
 46	defined(TARGET_83xx)
 47	unsigned long	bi_immr_base;	/* base of IMMR register */
 48#endif
 49#if defined(TARGET_PPC_MPC52xx)
 50	unsigned long   bi_mbar_base;   /* base of internal registers */
 51#endif
 52	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
 53	unsigned long	bi_ip_addr;	/* IP Address */
 54	unsigned char	bi_enetaddr[6];	/* Ethernet address */
 55	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
 56	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
 57	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
 58#if defined(TARGET_CPM2)
 59	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */
 60	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */
 61	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */
 62	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */
 63#endif
 64#if defined(TARGET_PPC_MPC52xx)
 65	unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
 66	unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
 67#endif
 68	unsigned long	bi_baudrate;	/* Console Baudrate */
 69#if defined(TARGET_4xx)
 70	unsigned char	bi_s_version[4];	/* Version of this structure */
 71	unsigned char	bi_r_version[32];	/* Version of the ROM (IBM) */
 72	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
 73	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */
 74	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
 75	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
 76#endif
 77#if defined(TARGET_HYMOD)
 78	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
 79#endif
 80#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \
 81	defined(TARGET_85xx) ||	defined(TARGET_83xx) || defined(TARGET_HAS_ETH1)
 82	/* second onboard ethernet port */
 83	unsigned char	bi_enet1addr[6];
 84#define HAVE_ENET1ADDR
 85#endif
 86#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \
 87    defined(TARGET_85xx) || defined(TARGET_HAS_ETH2)
 88	/* third onboard ethernet ports */
 89	unsigned char	bi_enet2addr[6];
 90#define HAVE_ENET2ADDR
 91#endif
 92#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3)
 93	/* fourth onboard ethernet ports */
 94	unsigned char	bi_enet3addr[6];
 95#define HAVE_ENET3ADDR
 96#endif
 97#if defined(TARGET_4xx)
 98	unsigned int	bi_opbfreq;		/* OB clock in Hz */
 99	int		bi_iic_fast[2];		/* Use fast i2c mode */
100#endif
101#if defined(TARGET_440GX)
102	int		bi_phynum[4];		/* phy mapping */
103	int		bi_phymode[4];		/* phy mode */
104#endif
105} bd_t;
106
107#define bi_tbfreq	bi_intfreq
108
109#endif	/* __PPCBOOT_H__ */