Loading...
1/*
2 * base MPC5200b Device Tree Source
3 *
4 * Copyright (C) 2010 SecretLab
5 * Grant Likely <grant@secretlab.ca>
6 * John Bonesio <bones@secretlab.ca>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 */
13
14/dts-v1/;
15
16/ {
17 model = "fsl,mpc5200b";
18 compatible = "fsl,mpc5200b";
19 #address-cells = <1>;
20 #size-cells = <1>;
21 interrupt-parent = <&mpc5200_pic>;
22
23 cpus {
24 #address-cells = <1>;
25 #size-cells = <0>;
26
27 powerpc: PowerPC,5200@0 {
28 device_type = "cpu";
29 reg = <0>;
30 d-cache-line-size = <32>;
31 i-cache-line-size = <32>;
32 d-cache-size = <0x4000>; // L1, 16K
33 i-cache-size = <0x4000>; // L1, 16K
34 timebase-frequency = <0>; // from bootloader
35 bus-frequency = <0>; // from bootloader
36 clock-frequency = <0>; // from bootloader
37 };
38 };
39
40 memory: memory {
41 device_type = "memory";
42 reg = <0x00000000 0x04000000>; // 64MB
43 };
44
45 soc: soc5200@f0000000 {
46 #address-cells = <1>;
47 #size-cells = <1>;
48 compatible = "fsl,mpc5200b-immr";
49 ranges = <0 0xf0000000 0x0000c000>;
50 reg = <0xf0000000 0x00000100>;
51 bus-frequency = <0>; // from bootloader
52 system-frequency = <0>; // from bootloader
53
54 cdm@200 {
55 compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
56 reg = <0x200 0x38>;
57 };
58
59 mpc5200_pic: interrupt-controller@500 {
60 // 5200 interrupts are encoded into two levels;
61 interrupt-controller;
62 #interrupt-cells = <3>;
63 compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
64 reg = <0x500 0x80>;
65 };
66
67 gpt0: timer@600 { // General Purpose Timer
68 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
69 #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
70 reg = <0x600 0x10>;
71 interrupts = <1 9 0>;
72 // add 'fsl,has-wdt' to enable watchdog
73 };
74
75 gpt1: timer@610 { // General Purpose Timer
76 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
77 #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
78 reg = <0x610 0x10>;
79 interrupts = <1 10 0>;
80 };
81
82 gpt2: timer@620 { // General Purpose Timer
83 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
84 #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
85 reg = <0x620 0x10>;
86 interrupts = <1 11 0>;
87 };
88
89 gpt3: timer@630 { // General Purpose Timer
90 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
91 #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
92 reg = <0x630 0x10>;
93 interrupts = <1 12 0>;
94 };
95
96 gpt4: timer@640 { // General Purpose Timer
97 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
98 #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
99 reg = <0x640 0x10>;
100 interrupts = <1 13 0>;
101 };
102
103 gpt5: timer@650 { // General Purpose Timer
104 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
105 #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
106 reg = <0x650 0x10>;
107 interrupts = <1 14 0>;
108 };
109
110 gpt6: timer@660 { // General Purpose Timer
111 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
112 #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
113 reg = <0x660 0x10>;
114 interrupts = <1 15 0>;
115 };
116
117 gpt7: timer@670 { // General Purpose Timer
118 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
119 #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode
120 reg = <0x670 0x10>;
121 interrupts = <1 16 0>;
122 };
123
124 rtc@800 { // Real time clock
125 compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
126 reg = <0x800 0x100>;
127 interrupts = <1 5 0 1 6 0>;
128 };
129
130 can@900 {
131 compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
132 interrupts = <2 17 0>;
133 reg = <0x900 0x80>;
134 };
135
136 can@980 {
137 compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
138 interrupts = <2 18 0>;
139 reg = <0x980 0x80>;
140 };
141
142 gpio_simple: gpio@b00 {
143 compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
144 reg = <0xb00 0x40>;
145 interrupts = <1 7 0>;
146 gpio-controller;
147 #gpio-cells = <2>;
148 };
149
150 gpio_wkup: gpio@c00 {
151 compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
152 reg = <0xc00 0x40>;
153 interrupts = <1 8 0 0 3 0>;
154 gpio-controller;
155 #gpio-cells = <2>;
156 };
157
158 spi@f00 {
159 #address-cells = <1>;
160 #size-cells = <0>;
161 compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
162 reg = <0xf00 0x20>;
163 interrupts = <2 13 0 2 14 0>;
164 };
165
166 usb: usb@1000 {
167 compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
168 reg = <0x1000 0xff>;
169 interrupts = <2 6 0>;
170 };
171
172 dma-controller@1200 {
173 compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
174 reg = <0x1200 0x80>;
175 interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
176 3 4 0 3 5 0 3 6 0 3 7 0
177 3 8 0 3 9 0 3 10 0 3 11 0
178 3 12 0 3 13 0 3 14 0 3 15 0>;
179 };
180
181 xlb@1f00 {
182 compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
183 reg = <0x1f00 0x100>;
184 };
185
186 psc1: psc@2000 { // PSC1
187 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
188 reg = <0x2000 0x100>;
189 interrupts = <2 1 0>;
190 };
191
192 psc2: psc@2200 { // PSC2
193 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
194 reg = <0x2200 0x100>;
195 interrupts = <2 2 0>;
196 };
197
198 psc3: psc@2400 { // PSC3
199 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
200 reg = <0x2400 0x100>;
201 interrupts = <2 3 0>;
202 };
203
204 psc4: psc@2600 { // PSC4
205 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
206 reg = <0x2600 0x100>;
207 interrupts = <2 11 0>;
208 };
209
210 psc5: psc@2800 { // PSC5
211 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
212 reg = <0x2800 0x100>;
213 interrupts = <2 12 0>;
214 };
215
216 psc6: psc@2c00 { // PSC6
217 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
218 reg = <0x2c00 0x100>;
219 interrupts = <2 4 0>;
220 };
221
222 eth0: ethernet@3000 {
223 compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
224 reg = <0x3000 0x400>;
225 local-mac-address = [ 00 00 00 00 00 00 ];
226 interrupts = <2 5 0>;
227 };
228
229 mdio@3000 {
230 #address-cells = <1>;
231 #size-cells = <0>;
232 compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
233 reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
234 interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
235 };
236
237 ata@3a00 {
238 compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
239 reg = <0x3a00 0x100>;
240 interrupts = <2 7 0>;
241 };
242
243 sclpc@3c00 {
244 compatible = "fsl,mpc5200-lpbfifo";
245 reg = <0x3c00 0x60>;
246 interrupts = <2 23 0>;
247 };
248
249 i2c@3d00 {
250 #address-cells = <1>;
251 #size-cells = <0>;
252 compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
253 reg = <0x3d00 0x40>;
254 interrupts = <2 15 0>;
255 };
256
257 i2c@3d40 {
258 #address-cells = <1>;
259 #size-cells = <0>;
260 compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
261 reg = <0x3d40 0x40>;
262 interrupts = <2 16 0>;
263 };
264
265 sram@8000 {
266 compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
267 reg = <0x8000 0x4000>;
268 };
269 };
270
271 pci: pci@f0000d00 {
272 #interrupt-cells = <1>;
273 #size-cells = <2>;
274 #address-cells = <3>;
275 device_type = "pci";
276 compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
277 reg = <0xf0000d00 0x100>;
278 // interrupt-map-mask = need to add
279 // interrupt-map = need to add
280 clock-frequency = <0>; // From boot loader
281 interrupts = <2 8 0 2 9 0 2 10 0>;
282 bus-range = <0 0>;
283 // ranges = need to add
284 };
285
286 localbus: localbus {
287 compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
288 #address-cells = <2>;
289 #size-cells = <1>;
290 ranges = <0 0 0xfc000000 0x2000000>;
291 };
292};
1/*
2 * base MPC5200b Device Tree Source
3 *
4 * Copyright (C) 2010 SecretLab
5 * Grant Likely <grant@secretlab.ca>
6 * John Bonesio <bones@secretlab.ca>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 */
13
14/dts-v1/;
15
16/ {
17 model = "fsl,mpc5200b";
18 compatible = "fsl,mpc5200b";
19 #address-cells = <1>;
20 #size-cells = <1>;
21 interrupt-parent = <&mpc5200_pic>;
22
23 cpus {
24 #address-cells = <1>;
25 #size-cells = <0>;
26
27 powerpc: PowerPC,5200@0 {
28 device_type = "cpu";
29 reg = <0>;
30 d-cache-line-size = <32>;
31 i-cache-line-size = <32>;
32 d-cache-size = <0x4000>; // L1, 16K
33 i-cache-size = <0x4000>; // L1, 16K
34 timebase-frequency = <0>; // from bootloader
35 bus-frequency = <0>; // from bootloader
36 clock-frequency = <0>; // from bootloader
37 };
38 };
39
40 memory: memory {
41 device_type = "memory";
42 reg = <0x00000000 0x04000000>; // 64MB
43 };
44
45 soc: soc5200@f0000000 {
46 #address-cells = <1>;
47 #size-cells = <1>;
48 compatible = "fsl,mpc5200b-immr";
49 ranges = <0 0xf0000000 0x0000c000>;
50 reg = <0xf0000000 0x00000100>;
51 bus-frequency = <0>; // from bootloader
52 system-frequency = <0>; // from bootloader
53
54 cdm@200 {
55 compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
56 reg = <0x200 0x38>;
57 };
58
59 mpc5200_pic: interrupt-controller@500 {
60 // 5200 interrupts are encoded into two levels;
61 interrupt-controller;
62 #interrupt-cells = <3>;
63 compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
64 reg = <0x500 0x80>;
65 };
66
67 timer@600 { // General Purpose Timer
68 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
69 reg = <0x600 0x10>;
70 interrupts = <1 9 0>;
71 };
72
73 timer@610 { // General Purpose Timer
74 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
75 reg = <0x610 0x10>;
76 interrupts = <1 10 0>;
77 };
78
79 timer@620 { // General Purpose Timer
80 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
81 reg = <0x620 0x10>;
82 interrupts = <1 11 0>;
83 };
84
85 timer@630 { // General Purpose Timer
86 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
87 reg = <0x630 0x10>;
88 interrupts = <1 12 0>;
89 };
90
91 timer@640 { // General Purpose Timer
92 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
93 reg = <0x640 0x10>;
94 interrupts = <1 13 0>;
95 };
96
97 timer@650 { // General Purpose Timer
98 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
99 reg = <0x650 0x10>;
100 interrupts = <1 14 0>;
101 };
102
103 timer@660 { // General Purpose Timer
104 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
105 reg = <0x660 0x10>;
106 interrupts = <1 15 0>;
107 };
108
109 timer@670 { // General Purpose Timer
110 compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
111 reg = <0x670 0x10>;
112 interrupts = <1 16 0>;
113 };
114
115 rtc@800 { // Real time clock
116 compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
117 reg = <0x800 0x100>;
118 interrupts = <1 5 0 1 6 0>;
119 };
120
121 can@900 {
122 compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
123 interrupts = <2 17 0>;
124 reg = <0x900 0x80>;
125 };
126
127 can@980 {
128 compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
129 interrupts = <2 18 0>;
130 reg = <0x980 0x80>;
131 };
132
133 gpio_simple: gpio@b00 {
134 compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
135 reg = <0xb00 0x40>;
136 interrupts = <1 7 0>;
137 gpio-controller;
138 #gpio-cells = <2>;
139 };
140
141 gpio_wkup: gpio@c00 {
142 compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
143 reg = <0xc00 0x40>;
144 interrupts = <1 8 0 0 3 0>;
145 gpio-controller;
146 #gpio-cells = <2>;
147 };
148
149 spi@f00 {
150 compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
151 reg = <0xf00 0x20>;
152 interrupts = <2 13 0 2 14 0>;
153 };
154
155 usb: usb@1000 {
156 compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
157 reg = <0x1000 0xff>;
158 interrupts = <2 6 0>;
159 };
160
161 dma-controller@1200 {
162 compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
163 reg = <0x1200 0x80>;
164 interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
165 3 4 0 3 5 0 3 6 0 3 7 0
166 3 8 0 3 9 0 3 10 0 3 11 0
167 3 12 0 3 13 0 3 14 0 3 15 0>;
168 };
169
170 xlb@1f00 {
171 compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
172 reg = <0x1f00 0x100>;
173 };
174
175 psc1: psc@2000 { // PSC1
176 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
177 reg = <0x2000 0x100>;
178 interrupts = <2 1 0>;
179 };
180
181 psc2: psc@2200 { // PSC2
182 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
183 reg = <0x2200 0x100>;
184 interrupts = <2 2 0>;
185 };
186
187 psc3: psc@2400 { // PSC3
188 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
189 reg = <0x2400 0x100>;
190 interrupts = <2 3 0>;
191 };
192
193 psc4: psc@2600 { // PSC4
194 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
195 reg = <0x2600 0x100>;
196 interrupts = <2 11 0>;
197 };
198
199 psc5: psc@2800 { // PSC5
200 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
201 reg = <0x2800 0x100>;
202 interrupts = <2 12 0>;
203 };
204
205 psc6: psc@2c00 { // PSC6
206 compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
207 reg = <0x2c00 0x100>;
208 interrupts = <2 4 0>;
209 };
210
211 eth0: ethernet@3000 {
212 compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
213 reg = <0x3000 0x400>;
214 local-mac-address = [ 00 00 00 00 00 00 ];
215 interrupts = <2 5 0>;
216 };
217
218 mdio@3000 {
219 #address-cells = <1>;
220 #size-cells = <0>;
221 compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
222 reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
223 interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
224 };
225
226 ata@3a00 {
227 compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
228 reg = <0x3a00 0x100>;
229 interrupts = <2 7 0>;
230 };
231
232 i2c@3d00 {
233 #address-cells = <1>;
234 #size-cells = <0>;
235 compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
236 reg = <0x3d00 0x40>;
237 interrupts = <2 15 0>;
238 };
239
240 i2c@3d40 {
241 #address-cells = <1>;
242 #size-cells = <0>;
243 compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
244 reg = <0x3d40 0x40>;
245 interrupts = <2 16 0>;
246 };
247
248 sram@8000 {
249 compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
250 reg = <0x8000 0x4000>;
251 };
252 };
253
254 pci: pci@f0000d00 {
255 #interrupt-cells = <1>;
256 #size-cells = <2>;
257 #address-cells = <3>;
258 device_type = "pci";
259 compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
260 reg = <0xf0000d00 0x100>;
261 // interrupt-map-mask = need to add
262 // interrupt-map = need to add
263 clock-frequency = <0>; // From boot loader
264 interrupts = <2 8 0 2 9 0 2 10 0>;
265 bus-range = <0 0>;
266 // ranges = need to add
267 };
268
269 localbus: localbus {
270 compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
271 #address-cells = <2>;
272 #size-cells = <1>;
273 ranges = <0 0 0xfc000000 0x2000000>;
274 };
275};