Loading...
1/*
2 * Freescale Media5200 board Device Tree Source
3 *
4 * Copyright 2009 Secret Lab Technologies Ltd.
5 * Grant Likely <grant.likely@secretlab.ca>
6 * Steven Cavanagh <scavanagh@secretlab.ca>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 */
13
14/include/ "mpc5200b.dtsi"
15
16&gpt0 { fsl,has-wdt; };
17
18/ {
19 model = "fsl,media5200";
20 compatible = "fsl,media5200";
21
22 aliases {
23 console = &console;
24 ethernet0 = ð0;
25 };
26
27 chosen {
28 stdout-path = &console;
29 };
30
31 cpus {
32 PowerPC,5200@0 {
33 timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot
34 bus-frequency = <132000000>; // 132 MHz
35 clock-frequency = <396000000>; // 396 MHz
36 };
37 };
38
39 memory {
40 reg = <0x00000000 0x08000000>; // 128MB RAM
41 };
42
43 soc5200@f0000000 {
44 bus-frequency = <132000000>;// 132 MHz
45
46 psc@2000 { // PSC1
47 status = "disabled";
48 };
49
50 psc@2200 { // PSC2
51 status = "disabled";
52 };
53
54 psc@2400 { // PSC3
55 status = "disabled";
56 };
57
58 psc@2600 { // PSC4
59 status = "disabled";
60 };
61
62 psc@2800 { // PSC5
63 status = "disabled";
64 };
65
66 // PSC6 in uart mode
67 console: psc@2c00 { // PSC6
68 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
69 };
70
71 ethernet@3000 {
72 phy-handle = <&phy0>;
73 };
74
75 mdio@3000 {
76 phy0: ethernet-phy@0 {
77 reg = <0>;
78 };
79 };
80
81 usb@1000 {
82 reg = <0x1000 0x100>;
83 };
84 };
85
86 pci@f0000d00 {
87 interrupt-map-mask = <0xf800 0 0 7>;
88 interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
89 0xc000 0 0 2 &media5200_fpga 0 3
90 0xc000 0 0 3 &media5200_fpga 0 4
91 0xc000 0 0 4 &media5200_fpga 0 5
92
93 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
94 0xc800 0 0 2 &media5200_fpga 0 4
95 0xc800 0 0 3 &media5200_fpga 0 5
96 0xc800 0 0 4 &media5200_fpga 0 2
97
98 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
99 0xd000 0 0 2 &media5200_fpga 0 5
100
101 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
102 >;
103 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
104 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
105 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
106 interrupt-parent = <&mpc5200_pic>;
107 };
108
109 localbus {
110 ranges = < 0 0 0xfc000000 0x02000000
111 1 0 0xfe000000 0x02000000
112 2 0 0xf0010000 0x00010000
113 3 0 0xf0020000 0x00010000 >;
114 flash@0,0 {
115 compatible = "amd,am29lv28ml", "cfi-flash";
116 reg = <0 0x0 0x2000000>; // 32 MB
117 bank-width = <4>; // Width in bytes of the flash bank
118 device-width = <2>; // Two devices on each bank
119 };
120
121 flash@1,0 {
122 compatible = "amd,am29lv28ml", "cfi-flash";
123 reg = <1 0 0x2000000>; // 32 MB
124 bank-width = <4>; // Width in bytes of the flash bank
125 device-width = <2>; // Two devices on each bank
126 };
127
128 media5200_fpga: fpga@2,0 {
129 compatible = "fsl,media5200-fpga";
130 interrupt-controller;
131 #interrupt-cells = <2>; // 0:bank 1:id; no type field
132 reg = <2 0 0x10000>;
133
134 interrupt-parent = <&mpc5200_pic>;
135 interrupts = <0 0 3 // IRQ bank 0
136 1 1 3>; // IRQ bank 1
137 };
138
139 uart@3,0 {
140 compatible = "ti,tl16c752bpt";
141 reg = <3 0 0x10000>;
142 interrupt-parent = <&media5200_fpga>;
143 interrupts = <0 0 0 1>; // 2 irqs
144 };
145 };
146};
1/*
2 * Freescale Media5200 board Device Tree Source
3 *
4 * Copyright 2009 Secret Lab Technologies Ltd.
5 * Grant Likely <grant.likely@secretlab.ca>
6 * Steven Cavanagh <scavanagh@secretlab.ca>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 */
13
14/include/ "mpc5200b.dtsi"
15
16/ {
17 model = "fsl,media5200";
18 compatible = "fsl,media5200";
19
20 aliases {
21 console = &console;
22 ethernet0 = ð0;
23 };
24
25 chosen {
26 linux,stdout-path = &console;
27 };
28
29 cpus {
30 PowerPC,5200@0 {
31 timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot
32 bus-frequency = <132000000>; // 132 MHz
33 clock-frequency = <396000000>; // 396 MHz
34 };
35 };
36
37 memory {
38 reg = <0x00000000 0x08000000>; // 128MB RAM
39 };
40
41 soc5200@f0000000 {
42 bus-frequency = <132000000>;// 132 MHz
43
44 timer@600 { // General Purpose Timer
45 fsl,has-wdt;
46 };
47
48 psc@2000 { // PSC1
49 status = "disabled";
50 };
51
52 psc@2200 { // PSC2
53 status = "disabled";
54 };
55
56 psc@2400 { // PSC3
57 status = "disabled";
58 };
59
60 psc@2600 { // PSC4
61 status = "disabled";
62 };
63
64 psc@2800 { // PSC5
65 status = "disabled";
66 };
67
68 // PSC6 in uart mode
69 console: psc@2c00 { // PSC6
70 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
71 };
72
73 ethernet@3000 {
74 phy-handle = <&phy0>;
75 };
76
77 mdio@3000 {
78 phy0: ethernet-phy@0 {
79 reg = <0>;
80 };
81 };
82
83 usb@1000 {
84 reg = <0x1000 0x100>;
85 };
86 };
87
88 pci@f0000d00 {
89 interrupt-map-mask = <0xf800 0 0 7>;
90 interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
91 0xc000 0 0 2 &media5200_fpga 0 3
92 0xc000 0 0 3 &media5200_fpga 0 4
93 0xc000 0 0 4 &media5200_fpga 0 5
94
95 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
96 0xc800 0 0 2 &media5200_fpga 0 4
97 0xc800 0 0 3 &media5200_fpga 0 5
98 0xc800 0 0 4 &media5200_fpga 0 2
99
100 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
101 0xd000 0 0 2 &media5200_fpga 0 5
102
103 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
104 >;
105 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
106 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
107 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
108 interrupt-parent = <&mpc5200_pic>;
109 };
110
111 localbus {
112 ranges = < 0 0 0xfc000000 0x02000000
113 1 0 0xfe000000 0x02000000
114 2 0 0xf0010000 0x00010000
115 3 0 0xf0020000 0x00010000 >;
116 flash@0,0 {
117 compatible = "amd,am29lv28ml", "cfi-flash";
118 reg = <0 0x0 0x2000000>; // 32 MB
119 bank-width = <4>; // Width in bytes of the flash bank
120 device-width = <2>; // Two devices on each bank
121 };
122
123 flash@1,0 {
124 compatible = "amd,am29lv28ml", "cfi-flash";
125 reg = <1 0 0x2000000>; // 32 MB
126 bank-width = <4>; // Width in bytes of the flash bank
127 device-width = <2>; // Two devices on each bank
128 };
129
130 media5200_fpga: fpga@2,0 {
131 compatible = "fsl,media5200-fpga";
132 interrupt-controller;
133 #interrupt-cells = <2>; // 0:bank 1:id; no type field
134 reg = <2 0 0x10000>;
135
136 interrupt-parent = <&mpc5200_pic>;
137 interrupts = <0 0 3 // IRQ bank 0
138 1 1 3>; // IRQ bank 1
139 };
140
141 uart@3,0 {
142 compatible = "ti,tl16c752bpt";
143 reg = <3 0 0x10000>;
144 interrupt-parent = <&media5200_fpga>;
145 interrupts = <0 0 0 1>; // 2 irqs
146 };
147 };
148};