Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
  1
  2/*
  3 * Copyright 2013 Freescale Semiconductor, Inc.
  4 *
  5 * This program is free software; you can redistribute it and/or modify
  6 * it under the terms of the GNU General Public License version 2 as
  7 * published by the Free Software Foundation.
  8 *
  9 */
 10
 11#include <dt-bindings/interrupt-controller/irq.h>
 12#include "imx6q-pinfunc.h"
 13#include "imx6qdl.dtsi"
 14
 15/ {
 16	aliases {
 17		ipu1 = &ipu2;
 18		spi4 = &ecspi5;
 19	};
 20
 21	cpus {
 22		#address-cells = <1>;
 23		#size-cells = <0>;
 24
 25		cpu0: cpu@0 {
 26			compatible = "arm,cortex-a9";
 27			device_type = "cpu";
 28			reg = <0>;
 29			next-level-cache = <&L2>;
 30			operating-points = <
 31				/* kHz    uV */
 32				1200000 1275000
 33				996000  1250000
 34				852000  1250000
 35				792000  1175000
 36				396000  975000
 37			>;
 38			fsl,soc-operating-points = <
 39				/* ARM kHz  SOC-PU uV */
 40				1200000 1275000
 41				996000	1250000
 42				852000	1250000
 43				792000	1175000
 44				396000	1175000
 45			>;
 46			clock-latency = <61036>; /* two CLK32 periods */
 47			clocks = <&clks IMX6QDL_CLK_ARM>,
 48				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 49				 <&clks IMX6QDL_CLK_STEP>,
 50				 <&clks IMX6QDL_CLK_PLL1_SW>,
 51				 <&clks IMX6QDL_CLK_PLL1_SYS>;
 52			clock-names = "arm", "pll2_pfd2_396m", "step",
 53				      "pll1_sw", "pll1_sys";
 54			arm-supply = <&reg_arm>;
 55			pu-supply = <&reg_pu>;
 56			soc-supply = <&reg_soc>;
 57		};
 58
 59		cpu@1 {
 60			compatible = "arm,cortex-a9";
 61			device_type = "cpu";
 62			reg = <1>;
 63			next-level-cache = <&L2>;
 64		};
 65
 66		cpu@2 {
 67			compatible = "arm,cortex-a9";
 68			device_type = "cpu";
 69			reg = <2>;
 70			next-level-cache = <&L2>;
 71		};
 72
 73		cpu@3 {
 74			compatible = "arm,cortex-a9";
 75			device_type = "cpu";
 76			reg = <3>;
 77			next-level-cache = <&L2>;
 78		};
 79	};
 80
 81	soc {
 82		ocram: sram@900000 {
 83			compatible = "mmio-sram";
 84			reg = <0x00900000 0x40000>;
 85			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 86		};
 87
 88		aips-bus@2000000 { /* AIPS1 */
 89			spba-bus@2000000 {
 90				ecspi5: ecspi@2018000 {
 91					#address-cells = <1>;
 92					#size-cells = <0>;
 93					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 94					reg = <0x02018000 0x4000>;
 95					interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
 96					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 97						 <&clks IMX6Q_CLK_ECSPI5>;
 98					clock-names = "ipg", "per";
 99					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
100					dma-names = "rx", "tx";
101					status = "disabled";
102				};
103			};
104
105			iomuxc: iomuxc@20e0000 {
106				compatible = "fsl,imx6q-iomuxc";
107			};
108		};
109
110		sata: sata@2200000 {
111			compatible = "fsl,imx6q-ahci";
112			reg = <0x02200000 0x4000>;
113			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
114			clocks = <&clks IMX6QDL_CLK_SATA>,
115				 <&clks IMX6QDL_CLK_SATA_REF_100M>,
116				 <&clks IMX6QDL_CLK_AHB>;
117			clock-names = "sata", "sata_ref", "ahb";
118			status = "disabled";
119		};
120
121		gpu_vg: gpu@2204000 {
122			compatible = "vivante,gc";
123			reg = <0x02204000 0x4000>;
124			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
125			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
126				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
127			clock-names = "bus", "core";
128			power-domains = <&pd_pu>;
129		};
130
131		ipu2: ipu@2800000 {
132			#address-cells = <1>;
133			#size-cells = <0>;
134			compatible = "fsl,imx6q-ipu";
135			reg = <0x02800000 0x400000>;
136			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
137				     <0 7 IRQ_TYPE_LEVEL_HIGH>;
138			clocks = <&clks IMX6QDL_CLK_IPU2>,
139				 <&clks IMX6QDL_CLK_IPU2_DI0>,
140				 <&clks IMX6QDL_CLK_IPU2_DI1>;
141			clock-names = "bus", "di0", "di1";
142			resets = <&src 4>;
143
144			ipu2_csi0: port@0 {
145				reg = <0>;
146
147				ipu2_csi0_from_mipi_vc2: endpoint {
148					remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
149				};
150			};
151
152			ipu2_csi1: port@1 {
153				reg = <1>;
154
155				ipu2_csi1_from_ipu2_csi1_mux: endpoint {
156					remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
157				};
158			};
159
160			ipu2_di0: port@2 {
161				#address-cells = <1>;
162				#size-cells = <0>;
163				reg = <2>;
164
165				ipu2_di0_disp0: disp0-endpoint {
166				};
167
168				ipu2_di0_hdmi: hdmi-endpoint {
169					remote-endpoint = <&hdmi_mux_2>;
170				};
171
172				ipu2_di0_mipi: mipi-endpoint {
173					remote-endpoint = <&mipi_mux_2>;
174				};
175
176				ipu2_di0_lvds0: lvds0-endpoint {
177					remote-endpoint = <&lvds0_mux_2>;
178				};
179
180				ipu2_di0_lvds1: lvds1-endpoint {
181					remote-endpoint = <&lvds1_mux_2>;
182				};
183			};
184
185			ipu2_di1: port@3 {
186				#address-cells = <1>;
187				#size-cells = <0>;
188				reg = <3>;
189
190				ipu2_di1_hdmi: hdmi-endpoint {
191					remote-endpoint = <&hdmi_mux_3>;
192				};
193
194				ipu2_di1_mipi: mipi-endpoint {
195					remote-endpoint = <&mipi_mux_3>;
196				};
197
198				ipu2_di1_lvds0: lvds0-endpoint {
199					remote-endpoint = <&lvds0_mux_3>;
200				};
201
202				ipu2_di1_lvds1: lvds1-endpoint {
203					remote-endpoint = <&lvds1_mux_3>;
204				};
205			};
206		};
207	};
208
209	capture-subsystem {
210		compatible = "fsl,imx-capture-subsystem";
211		ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>;
212	};
213
214	display-subsystem {
215		compatible = "fsl,imx-display-subsystem";
216		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
217	};
218};
219
220&gpio1 {
221	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
222		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
223		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
224		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
225		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
226		      <&iomuxc 22 116 10>;
227};
228
229&gpio2 {
230	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
231		      <&iomuxc 31  44  1>;
232};
233
234&gpio3 {
235	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
236};
237
238&gpio4 {
239	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
240};
241
242&gpio5 {
243	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
244		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
245};
246
247&gpio6 {
248	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
249		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
250		      <&iomuxc 31  86 1>;
251};
252
253&gpio7 {
254	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
255};
256
257&gpr {
258	ipu1_csi0_mux {
259		compatible = "video-mux";
260		mux-controls = <&mux 0>;
261		#address-cells = <1>;
262		#size-cells = <0>;
263
264		port@0 {
265			reg = <0>;
266
267			ipu1_csi0_mux_from_mipi_vc0: endpoint {
268				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
269			};
270		};
271
272		port@1 {
273			reg = <1>;
274
275			ipu1_csi0_mux_from_parallel_sensor: endpoint {
276			};
277		};
278
279		port@2 {
280			reg = <2>;
281
282			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
283				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
284			};
285		};
286	};
287
288	ipu2_csi1_mux {
289		compatible = "video-mux";
290		mux-controls = <&mux 1>;
291		#address-cells = <1>;
292		#size-cells = <0>;
293
294		port@0 {
295			reg = <0>;
296
297			ipu2_csi1_mux_from_mipi_vc3: endpoint {
298				remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
299			};
300		};
301
302		port@1 {
303			reg = <1>;
304
305			ipu2_csi1_mux_from_parallel_sensor: endpoint {
306			};
307		};
308
309		port@2 {
310			reg = <2>;
311
312			ipu2_csi1_mux_to_ipu2_csi1: endpoint {
313				remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
314			};
315		};
316	};
317};
318
319&hdmi {
320	compatible = "fsl,imx6q-hdmi";
321
322	port@2 {
323		reg = <2>;
324
325		hdmi_mux_2: endpoint {
326			remote-endpoint = <&ipu2_di0_hdmi>;
327		};
328	};
329
330	port@3 {
331		reg = <3>;
332
333		hdmi_mux_3: endpoint {
334			remote-endpoint = <&ipu2_di1_hdmi>;
335		};
336	};
337};
338
339&ipu1_csi1 {
340	ipu1_csi1_from_mipi_vc1: endpoint {
341		remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
342	};
343};
344
345&ldb {
346	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
347		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
348		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
349		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
350	clock-names = "di0_pll", "di1_pll",
351		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
352		      "di0", "di1";
353
354	lvds-channel@0 {
355		port@2 {
356			reg = <2>;
357
358			lvds0_mux_2: endpoint {
359				remote-endpoint = <&ipu2_di0_lvds0>;
360			};
361		};
362
363		port@3 {
364			reg = <3>;
365
366			lvds0_mux_3: endpoint {
367				remote-endpoint = <&ipu2_di1_lvds0>;
368			};
369		};
370	};
371
372	lvds-channel@1 {
373		port@2 {
374			reg = <2>;
375
376			lvds1_mux_2: endpoint {
377				remote-endpoint = <&ipu2_di0_lvds1>;
378			};
379		};
380
381		port@3 {
382			reg = <3>;
383
384			lvds1_mux_3: endpoint {
385				remote-endpoint = <&ipu2_di1_lvds1>;
386			};
387		};
388	};
389};
390
391&mipi_csi {
392	port@1 {
393		reg = <1>;
394
395		mipi_vc0_to_ipu1_csi0_mux: endpoint {
396			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
397		};
398	};
399
400	port@2 {
401		reg = <2>;
402
403		mipi_vc1_to_ipu1_csi1: endpoint {
404			remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
405		};
406	};
407
408	port@3 {
409		reg = <3>;
410
411		mipi_vc2_to_ipu2_csi0: endpoint {
412			remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
413		};
414	};
415
416	port@4 {
417		reg = <4>;
418
419		mipi_vc3_to_ipu2_csi1_mux: endpoint {
420			remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
421		};
422	};
423};
424
425&mipi_dsi {
426	ports {
427		port@2 {
428			reg = <2>;
429
430			mipi_mux_2: endpoint {
431				remote-endpoint = <&ipu2_di0_mipi>;
432			};
433		};
434
435		port@3 {
436			reg = <3>;
437
438			mipi_mux_3: endpoint {
439				remote-endpoint = <&ipu2_di1_mipi>;
440			};
441		};
442	};
443};
444
445&mux {
446	mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */
447			<0x04 0x00100000>, /* MIPI_IPU2_MUX */
448			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
449			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
450			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
451			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
452			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
453};
454
455&vpu {
456	compatible = "fsl,imx6q-vpu", "cnm,coda960";
457};