Loading...
1/*
2 * linux/arch/arm/mach-omap1/board-generic.c
3 *
4 * Modified from board-innovator1510.c
5 *
6 * Code for generic OMAP board. Should work on many OMAP systems where
7 * the device drivers take care of all the necessary hardware initialization.
8 * Do not put any board specific code to this file; create a new machine
9 * type if you need custom low-level initializations.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15#include <linux/gpio.h>
16#include <linux/kernel.h>
17#include <linux/init.h>
18#include <linux/platform_device.h>
19
20#include <mach/hardware.h>
21#include <asm/mach-types.h>
22#include <asm/mach/arch.h>
23#include <asm/mach/map.h>
24
25#include <mach/mux.h>
26
27#include <mach/usb.h>
28
29#include "common.h"
30
31/* assume no Mini-AB port */
32
33#ifdef CONFIG_ARCH_OMAP15XX
34static struct omap_usb_config generic1510_usb_config __initdata = {
35 .register_host = 1,
36 .register_dev = 1,
37 .hmc_mode = 16,
38 .pins[0] = 3,
39};
40#endif
41
42#if defined(CONFIG_ARCH_OMAP16XX)
43static struct omap_usb_config generic1610_usb_config __initdata = {
44#ifdef CONFIG_USB_OTG
45 .otg = 1,
46#endif
47 .register_host = 1,
48 .register_dev = 1,
49 .hmc_mode = 16,
50 .pins[0] = 6,
51};
52#endif
53
54static void __init omap_generic_init(void)
55{
56#ifdef CONFIG_ARCH_OMAP15XX
57 if (cpu_is_omap15xx()) {
58 /* mux pins for uarts */
59 omap_cfg_reg(UART1_TX);
60 omap_cfg_reg(UART1_RTS);
61 omap_cfg_reg(UART2_TX);
62 omap_cfg_reg(UART2_RTS);
63 omap_cfg_reg(UART3_TX);
64 omap_cfg_reg(UART3_RX);
65
66 omap1_usb_init(&generic1510_usb_config);
67 }
68#endif
69#if defined(CONFIG_ARCH_OMAP16XX)
70 if (!cpu_is_omap1510()) {
71 omap1_usb_init(&generic1610_usb_config);
72 }
73#endif
74
75 omap_serial_init();
76 omap_register_i2c_bus(1, 100, NULL, 0);
77}
78
79MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
80 /* Maintainer: Tony Lindgren <tony@atomide.com> */
81 .atag_offset = 0x100,
82 .map_io = omap16xx_map_io,
83 .init_early = omap1_init_early,
84 .init_irq = omap1_init_irq,
85 .handle_irq = omap1_handle_irq,
86 .init_machine = omap_generic_init,
87 .init_late = omap1_init_late,
88 .init_time = omap1_timer_init,
89 .restart = omap1_restart,
90MACHINE_END
1/*
2 * linux/arch/arm/mach-omap1/board-generic.c
3 *
4 * Modified from board-innovator1510.c
5 *
6 * Code for generic OMAP board. Should work on many OMAP systems where
7 * the device drivers take care of all the necessary hardware initialization.
8 * Do not put any board specific code to this file; create a new machine
9 * type if you need custom low-level initializations.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16#include <linux/kernel.h>
17#include <linux/init.h>
18#include <linux/platform_device.h>
19
20#include <mach/hardware.h>
21#include <asm/mach-types.h>
22#include <asm/mach/arch.h>
23#include <asm/mach/map.h>
24
25#include <mach/gpio.h>
26#include <plat/mux.h>
27#include <plat/usb.h>
28#include <plat/board.h>
29#include <plat/common.h>
30
31static void __init omap_generic_init_irq(void)
32{
33 omap1_init_common_hw();
34 omap1_init_irq();
35}
36
37/* assume no Mini-AB port */
38
39#ifdef CONFIG_ARCH_OMAP15XX
40static struct omap_usb_config generic1510_usb_config __initdata = {
41 .register_host = 1,
42 .register_dev = 1,
43 .hmc_mode = 16,
44 .pins[0] = 3,
45};
46#endif
47
48#if defined(CONFIG_ARCH_OMAP16XX)
49static struct omap_usb_config generic1610_usb_config __initdata = {
50#ifdef CONFIG_USB_OTG
51 .otg = 1,
52#endif
53 .register_host = 1,
54 .register_dev = 1,
55 .hmc_mode = 16,
56 .pins[0] = 6,
57};
58#endif
59
60static struct omap_board_config_kernel generic_config[] __initdata = {
61};
62
63static void __init omap_generic_init(void)
64{
65#ifdef CONFIG_ARCH_OMAP15XX
66 if (cpu_is_omap15xx()) {
67 /* mux pins for uarts */
68 omap_cfg_reg(UART1_TX);
69 omap_cfg_reg(UART1_RTS);
70 omap_cfg_reg(UART2_TX);
71 omap_cfg_reg(UART2_RTS);
72 omap_cfg_reg(UART3_TX);
73 omap_cfg_reg(UART3_RX);
74
75 omap1_usb_init(&generic1510_usb_config);
76 }
77#endif
78#if defined(CONFIG_ARCH_OMAP16XX)
79 if (!cpu_is_omap1510()) {
80 omap1_usb_init(&generic1610_usb_config);
81 }
82#endif
83
84 omap_board_config = generic_config;
85 omap_board_config_size = ARRAY_SIZE(generic_config);
86 omap_serial_init();
87 omap_register_i2c_bus(1, 100, NULL, 0);
88}
89
90static void __init omap_generic_map_io(void)
91{
92 omap1_map_common_io();
93}
94
95MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
96 /* Maintainer: Tony Lindgren <tony@atomide.com> */
97 .boot_params = 0x10000100,
98 .map_io = omap_generic_map_io,
99 .reserve = omap_reserve,
100 .init_irq = omap_generic_init_irq,
101 .init_machine = omap_generic_init,
102 .timer = &omap1_timer,
103MACHINE_END