1/*
  2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
  3 *
  4 * This program is free software; you can redistribute it and/or modify
  5 * it under the terms of the GNU General Public License version 2 as
  6 * published by the Free Software Foundation.
  7 */
  8/dts-v1/;
  9
 10#include "omap5-board-common.dtsi"
 11
 12/ {
 13	model = "TI OMAP5 uEVM board";
 14	compatible = "ti,omap5-uevm", "ti,omap5";
 15
 16	memory@80000000 {
 17		device_type = "memory";
 18		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
 19	};
 20
 21	aliases {
 22		ethernet = &ethernet;
 23	};
 24
 25	leds {
 26		compatible = "gpio-leds";
 27		led1 {
 28			label = "omap5:blue:usr1";
 29			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
 30			linux,default-trigger = "heartbeat";
 31			default-state = "off";
 32		};
 33	};
 34
 35	evm_keys {
 36		compatible = "gpio-keys";
 37
 38		pinctrl-names = "default";
 39		pinctrl-0 = <&evm_keys_pins>;
 40
 41		#address-cells = <7>;
 42		#size-cells = <0>;
 43
 44		btn1 {
 45			label = "BTN1";
 46			linux,code = <169>;
 47			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
 48			wakeup-source;
 49			autorepeat;
 50			debounce-interval = <50>;
 51		};
 52	};
 53
 54	evm_leds {
 55		compatible = "gpio-leds";
 56
 57		led1 {
 58			label = "omap5:red:led";
 59			gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
 60			linux,default-trigger = "mmc0";
 61			default-state = "off";
 62		};
 63
 64		led2 {
 65			label = "omap5:green:led";
 66			gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
 67			linux,default-trigger = "mmc1";
 68			default-state = "off";
 69		};
 70
 71		led3 {
 72			label = "omap5:blue:led";
 73			gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
 74			linux,default-trigger = "mmc2";
 75			default-state = "off";
 76		};
 77
 78		led4 {
 79			label = "omap5:green:led1";
 80			gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
 81			linux,default-trigger = "heartbeat";
 82			default-state = "off";
 83		};
 84
 85		led5 {
 86			label = "omap5:green:led2";
 87			gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
 88			linux,default-trigger = "default-on";
 89			default-state = "off";
 90		};
 91
 92		led6 {
 93			label = "omap5:green:led3";
 94			gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
 95			linux,default-trigger = "heartbeat";
 96			default-state = "off";
 97		};
 98
 99		led7 {
100			label = "omap5:green:led4";
101			gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
102			linux,default-trigger = "default-on";
103			default-state = "off";
104		};
105
106		led8 {
107			label = "omap5:green:led5";
108			gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
109			linux,default-trigger = "heartbeat";
110			default-state = "off";
111		};
112	};
113};
114
115&hdmi {
116	vdda-supply = <&ldo4_reg>;
117};
118
119&i2c1 {
120	eeprom@50 {
121		compatible = "atmel,24c02";
122		reg = <0x50>;
123	};
124};
125
126&i2c5 {
127	pinctrl-names = "default";
128	pinctrl-0 = <&i2c5_pins>;
129
130	clock-frequency = <400000>;
131
132	gpio9: gpio@22 {
133		compatible = "ti,tca6424";
134		reg = <0x22>;
135		gpio-controller;
136		#gpio-cells = <2>;
137	};
138};
139
140&mmc1 {
141	pinctrl-names = "default";
142	pinctrl-0 = <&mmc1_pins>;
143
144	cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>;	/* gpio5_152 */
145};
146
147&omap5_pmx_core {
148	evm_keys_pins: pinmux_evm_keys_gpio_pins {
149		pinctrl-single,pins = <
150			OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6)	/* gpio3_83 */
151		>;
152	};
153
154	i2c5_pins: pinmux_i2c5_pins {
155		pinctrl-single,pins = <
156			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
157			OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
158		>;
159	};
160
161	mmc1_pins: pinmux_mmc1_pins {
162		pinctrl-single,pins = <
163			OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpio5_152 */
164		>;
165	};
166};
167
168&tpd12s015 {
169	gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
170		<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
171		<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
172};
173
174&twl6040 {
175	ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
176};
177
178&twl6040_pins {
179	pinctrl-single,pins = <
180		OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
181	>;
182};
183
184&usbhsehci {
185	#address-cells = <1>;
186	#size-cells = <0>;
187
188	hub@2 {
189		compatible = "usb424,3503";
190		reg = <2>;
191		#address-cells = <1>;
192		#size-cells = <0>;
193	};
194
195	ethernet: usbether@3 {
196		compatible = "usb424,9730";
197		reg = <3>;
198	};
199};
200
201&wlcore {
202	compatible = "ti,wl1837";
203};