Linux Audio

Check our new training course

Loading...
  1/*
  2 * This file is subject to the terms and conditions of the GNU General Public
  3 * License.  See the file "COPYING" in the main directory of this archive
  4 * for more details.
  5 *
  6 * Copyright (C) 2004-2008 Cavium Networks
  7 */
  8#ifndef __ASM_OCTEON_OCTEON_H
  9#define __ASM_OCTEON_OCTEON_H
 10
 11#include <asm/octeon/cvmx.h>
 12#include <asm/bitfield.h>
 13
 14extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size,
 15						uint64_t alignment,
 16						uint64_t min_addr,
 17						uint64_t max_addr,
 18						int do_locking);
 19extern void *octeon_bootmem_alloc(uint64_t size, uint64_t alignment,
 20				  int do_locking);
 21extern void *octeon_bootmem_alloc_range(uint64_t size, uint64_t alignment,
 22					uint64_t min_addr, uint64_t max_addr,
 23					int do_locking);
 24extern void *octeon_bootmem_alloc_named(uint64_t size, uint64_t alignment,
 25					char *name);
 26extern void *octeon_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr,
 27					      uint64_t max_addr, uint64_t align,
 28					      char *name);
 29extern void *octeon_bootmem_alloc_named_address(uint64_t size, uint64_t address,
 30						char *name);
 31extern int octeon_bootmem_free_named(char *name);
 32extern void octeon_bootmem_lock(void);
 33extern void octeon_bootmem_unlock(void);
 34
 35extern int octeon_is_simulation(void);
 36extern int octeon_is_pci_host(void);
 37extern int octeon_usb_is_ref_clk(void);
 38extern uint64_t octeon_get_clock_rate(void);
 39extern u64 octeon_get_io_clock_rate(void);
 40extern const char *octeon_board_type_string(void);
 41extern const char *octeon_get_pci_interrupts(void);
 42extern int octeon_get_southbridge_interrupt(void);
 43extern int octeon_get_boot_coremask(void);
 44extern int octeon_get_boot_num_arguments(void);
 45extern const char *octeon_get_boot_argument(int arg);
 46extern void octeon_hal_setup_reserved32(void);
 47extern void octeon_user_io_init(void);
 48
 49extern void octeon_init_cvmcount(void);
 50extern void octeon_setup_delays(void);
 51extern void octeon_io_clk_delay(unsigned long);
 52
 53#define OCTEON_ARGV_MAX_ARGS	64
 54#define OCTOEN_SERIAL_LEN	20
 55
 56struct octeon_boot_descriptor {
 57#ifdef __BIG_ENDIAN_BITFIELD
 58	/* Start of block referenced by assembly code - do not change! */
 59	uint32_t desc_version;
 60	uint32_t desc_size;
 61	uint64_t stack_top;
 62	uint64_t heap_base;
 63	uint64_t heap_end;
 64	/* Only used by bootloader */
 65	uint64_t entry_point;
 66	uint64_t desc_vaddr;
 67	/* End of This block referenced by assembly code - do not change! */
 68	uint32_t exception_base_addr;
 69	uint32_t stack_size;
 70	uint32_t heap_size;
 71	/* Argc count for application. */
 72	uint32_t argc;
 73	uint32_t argv[OCTEON_ARGV_MAX_ARGS];
 74
 75#define	 BOOT_FLAG_INIT_CORE		(1 << 0)
 76#define	 OCTEON_BL_FLAG_DEBUG		(1 << 1)
 77#define	 OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
 78	/* If set, use uart1 for console */
 79#define	 OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
 80	/* If set, use PCI console */
 81#define	 OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
 82	/* Call exit on break on serial port */
 83#define	 OCTEON_BL_FLAG_BREAK		(1 << 5)
 84
 85	uint32_t flags;
 86	uint32_t core_mask;
 87	/* DRAM size in megabyes. */
 88	uint32_t dram_size;
 89	/* physical address of free memory descriptor block. */
 90	uint32_t phy_mem_desc_addr;
 91	/* used to pass flags from app to debugger. */
 92	uint32_t debugger_flags_base_addr;
 93	/* CPU clock speed, in hz. */
 94	uint32_t eclock_hz;
 95	/* DRAM clock speed, in hz. */
 96	uint32_t dclock_hz;
 97	/* SPI4 clock in hz. */
 98	uint32_t spi_clock_hz;
 99	uint16_t board_type;
100	uint8_t board_rev_major;
101	uint8_t board_rev_minor;
102	uint16_t chip_type;
103	uint8_t chip_rev_major;
104	uint8_t chip_rev_minor;
105	char board_serial_number[OCTOEN_SERIAL_LEN];
106	uint8_t mac_addr_base[6];
107	uint8_t mac_addr_count;
108	uint64_t cvmx_desc_vaddr;
109#else
110	uint32_t desc_size;
111	uint32_t desc_version;
112	uint64_t stack_top;
113	uint64_t heap_base;
114	uint64_t heap_end;
115	/* Only used by bootloader */
116	uint64_t entry_point;
117	uint64_t desc_vaddr;
118	/* End of This block referenced by assembly code - do not change! */
119	uint32_t stack_size;
120	uint32_t exception_base_addr;
121	uint32_t argc;
122	uint32_t heap_size;
123	/*
124	 * Argc count for application.
125	 * Warning low bit scrambled in little-endian.
126	 */
127	uint32_t argv[OCTEON_ARGV_MAX_ARGS];
128
129#define  BOOT_FLAG_INIT_CORE		(1 << 0)
130#define  OCTEON_BL_FLAG_DEBUG		(1 << 1)
131#define  OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
132	/* If set, use uart1 for console */
133#define  OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
134	/* If set, use PCI console */
135#define  OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
136	/* Call exit on break on serial port */
137#define  OCTEON_BL_FLAG_BREAK		(1 << 5)
138
139	uint32_t core_mask;
140	uint32_t flags;
141	/* physical address of free memory descriptor block. */
142	uint32_t phy_mem_desc_addr;
143	/* DRAM size in megabyes. */
144	uint32_t dram_size;
145	/* CPU clock speed, in hz. */
146	uint32_t eclock_hz;
147	/* used to pass flags from app to debugger. */
148	uint32_t debugger_flags_base_addr;
149	/* SPI4 clock in hz. */
150	uint32_t spi_clock_hz;
151	/* DRAM clock speed, in hz. */
152	uint32_t dclock_hz;
153	uint8_t chip_rev_minor;
154	uint8_t chip_rev_major;
155	uint16_t chip_type;
156	uint8_t board_rev_minor;
157	uint8_t board_rev_major;
158	uint16_t board_type;
159
160	uint64_t unused1[4]; /* Not even filled in by bootloader. */
161
162	uint64_t cvmx_desc_vaddr;
163#endif
164};
165
166union octeon_cvmemctl {
167	uint64_t u64;
168	struct {
169		/* RO 1 = BIST fail, 0 = BIST pass */
170		__BITFIELD_FIELD(uint64_t tlbbist:1,
171		/* RO 1 = BIST fail, 0 = BIST pass */
172		__BITFIELD_FIELD(uint64_t l1cbist:1,
173		/* RO 1 = BIST fail, 0 = BIST pass */
174		__BITFIELD_FIELD(uint64_t l1dbist:1,
175		/* RO 1 = BIST fail, 0 = BIST pass */
176		__BITFIELD_FIELD(uint64_t dcmbist:1,
177		/* RO 1 = BIST fail, 0 = BIST pass */
178		__BITFIELD_FIELD(uint64_t ptgbist:1,
179		/* RO 1 = BIST fail, 0 = BIST pass */
180		__BITFIELD_FIELD(uint64_t wbfbist:1,
181		/* Reserved */
182		__BITFIELD_FIELD(uint64_t reserved:17,
183		/* OCTEON II - TLB replacement policy: 0 = bitmask LRU; 1 = NLU.
184		 * This field selects between the TLB replacement policies:
185		 * bitmask LRU or NLU. Bitmask LRU maintains a mask of
186		 * recently used TLB entries and avoids them as new entries
187		 * are allocated. NLU simply guarantees that the next
188		 * allocation is not the last used TLB entry. */
189		__BITFIELD_FIELD(uint64_t tlbnlu:1,
190		/* OCTEON II - Selects the bit in the counter used for
191		 * releasing a PAUSE. This counter trips every 2(8+PAUSETIME)
192		 * cycles. If not already released, the cnMIPS II core will
193		 * always release a given PAUSE instruction within
194		 * 2(8+PAUSETIME). If the counter trip happens to line up,
195		 * the cnMIPS II core may release the PAUSE instantly. */
196		__BITFIELD_FIELD(uint64_t pausetime:3,
197		/* OCTEON II - This field is an extension of
198		 * CvmMemCtl[DIDTTO] */
199		__BITFIELD_FIELD(uint64_t didtto2:1,
200		/* R/W If set, marked write-buffer entries time out
201		 * the same as as other entries; if clear, marked
202		 * write-buffer entries use the maximum timeout. */
203		__BITFIELD_FIELD(uint64_t dismarkwblongto:1,
204		/* R/W If set, a merged store does not clear the
205		 * write-buffer entry timeout state. */
206		__BITFIELD_FIELD(uint64_t dismrgclrwbto:1,
207		/* R/W Two bits that are the MSBs of the resultant
208		 * CVMSEG LM word location for an IOBDMA. The other 8
209		 * bits come from the SCRADDR field of the IOBDMA. */
210		__BITFIELD_FIELD(uint64_t iobdmascrmsb:2,
211		/* R/W If set, SYNCWS and SYNCS only order marked
212		 * stores; if clear, SYNCWS and SYNCS only order
213		 * unmarked stores. SYNCWSMARKED has no effect when
214		 * DISSYNCWS is set. */
215		__BITFIELD_FIELD(uint64_t syncwsmarked:1,
216		/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as
217		 * SYNC. */
218		__BITFIELD_FIELD(uint64_t dissyncws:1,
219		/* R/W If set, no stall happens on write buffer
220		 * full. */
221		__BITFIELD_FIELD(uint64_t diswbfst:1,
222		/* R/W If set (and SX set), supervisor-level
223		 * loads/stores can use XKPHYS addresses with
224		 * VA<48>==0 */
225		__BITFIELD_FIELD(uint64_t xkmemenas:1,
226		/* R/W If set (and UX set), user-level loads/stores
227		 * can use XKPHYS addresses with VA<48>==0 */
228		__BITFIELD_FIELD(uint64_t xkmemenau:1,
229		/* R/W If set (and SX set), supervisor-level
230		 * loads/stores can use XKPHYS addresses with
231		 * VA<48>==1 */
232		__BITFIELD_FIELD(uint64_t xkioenas:1,
233		/* R/W If set (and UX set), user-level loads/stores
234		 * can use XKPHYS addresses with VA<48>==1 */
235		__BITFIELD_FIELD(uint64_t xkioenau:1,
236		/* R/W If set, all stores act as SYNCW (NOMERGE must
237		 * be set when this is set) RW, reset to 0. */
238		__BITFIELD_FIELD(uint64_t allsyncw:1,
239		/* R/W If set, no stores merge, and all stores reach
240		 * the coherent bus in order. */
241		__BITFIELD_FIELD(uint64_t nomerge:1,
242		/* R/W Selects the bit in the counter used for DID
243		 * time-outs 0 = 231, 1 = 230, 2 = 229, 3 =
244		 * 214. Actual time-out is between 1x and 2x this
245		 * interval. For example, with DIDTTO=3, expiration
246		 * interval is between 16K and 32K. */
247		__BITFIELD_FIELD(uint64_t didtto:2,
248		/* R/W If set, the (mem) CSR clock never turns off. */
249		__BITFIELD_FIELD(uint64_t csrckalwys:1,
250		/* R/W If set, mclk never turns off. */
251		__BITFIELD_FIELD(uint64_t mclkalwys:1,
252		/* R/W Selects the bit in the counter used for write
253		 * buffer flush time-outs (WBFLT+11) is the bit
254		 * position in an internal counter used to determine
255		 * expiration. The write buffer expires between 1x and
256		 * 2x this interval. For example, with WBFLT = 0, a
257		 * write buffer expires between 2K and 4K cycles after
258		 * the write buffer entry is allocated. */
259		__BITFIELD_FIELD(uint64_t wbfltime:3,
260		/* R/W If set, do not put Istream in the L2 cache. */
261		__BITFIELD_FIELD(uint64_t istrnol2:1,
262		/* R/W The write buffer threshold. */
263		__BITFIELD_FIELD(uint64_t wbthresh:4,
264		/* Reserved */
265		__BITFIELD_FIELD(uint64_t reserved2:2,
266		/* R/W If set, CVMSEG is available for loads/stores in
267		 * kernel/debug mode. */
268		__BITFIELD_FIELD(uint64_t cvmsegenak:1,
269		/* R/W If set, CVMSEG is available for loads/stores in
270		 * supervisor mode. */
271		__BITFIELD_FIELD(uint64_t cvmsegenas:1,
272		/* R/W If set, CVMSEG is available for loads/stores in
273		 * user mode. */
274		__BITFIELD_FIELD(uint64_t cvmsegenau:1,
275		/* R/W Size of local memory in cache blocks, 54 (6912
276		 * bytes) is max legal value. */
277		__BITFIELD_FIELD(uint64_t lmemsz:6,
278		;)))))))))))))))))))))))))))))))))
279	} s;
280};
281
282extern void octeon_write_lcd(const char *s);
283extern void octeon_check_cpu_bist(void);
284extern int octeon_get_boot_uart(void);
285
286struct uart_port;
287extern unsigned int octeon_serial_in(struct uart_port *, int);
288extern void octeon_serial_out(struct uart_port *, int, int);
289
290/**
291 * Write a 32bit value to the Octeon NPI register space
292 *
293 * @address: Address to write to
294 * @val:     Value to write
295 */
296static inline void octeon_npi_write32(uint64_t address, uint32_t val)
297{
298	cvmx_write64_uint32(address ^ 4, val);
299	cvmx_read64_uint32(address ^ 4);
300}
301
302#ifdef CONFIG_SMP
303void octeon_setup_smp(void);
304#else
305static inline void octeon_setup_smp(void) {}
306#endif
307
308struct irq_domain;
309struct device_node;
310struct irq_data;
311struct irq_chip;
312void octeon_ciu3_mbox_send(int cpu, unsigned int mbox);
313int octeon_irq_ciu3_xlat(struct irq_domain *d,
314			 struct device_node *node,
315			 const u32 *intspec,
316			 unsigned int intsize,
317			 unsigned long *out_hwirq,
318			 unsigned int *out_type);
319void octeon_irq_ciu3_enable(struct irq_data *data);
320void octeon_irq_ciu3_disable(struct irq_data *data);
321void octeon_irq_ciu3_ack(struct irq_data *data);
322void octeon_irq_ciu3_mask(struct irq_data *data);
323void octeon_irq_ciu3_mask_ack(struct irq_data *data);
324int octeon_irq_ciu3_mapx(struct irq_domain *d, unsigned int virq,
325			 irq_hw_number_t hw, struct irq_chip *chip);
326
327/* Octeon multiplier save/restore routines from octeon_switch.S */
328void octeon_mult_save(void);
329void octeon_mult_restore(void);
330void octeon_mult_save_end(void);
331void octeon_mult_restore_end(void);
332void octeon_mult_save3(void);
333void octeon_mult_save3_end(void);
334void octeon_mult_save2(void);
335void octeon_mult_save2_end(void);
336void octeon_mult_restore3(void);
337void octeon_mult_restore3_end(void);
338void octeon_mult_restore2(void);
339void octeon_mult_restore2_end(void);
340
341/**
342 * Read a 32bit value from the Octeon NPI register space
343 *
344 * @address: Address to read
345 * Returns The result
346 */
347static inline uint32_t octeon_npi_read32(uint64_t address)
348{
349	return cvmx_read64_uint32(address ^ 4);
350}
351
352extern struct cvmx_bootinfo *octeon_bootinfo;
353
354extern uint64_t octeon_bootloader_entry_addr;
355
356extern void (*octeon_irq_setup_secondary)(void);
357
358typedef void (*octeon_irq_ip4_handler_t)(void);
359void octeon_irq_set_ip4_handler(octeon_irq_ip4_handler_t);
360
361extern void octeon_fixup_irqs(void);
362
363extern struct semaphore octeon_bootbus_sem;
364
365#endif /* __ASM_OCTEON_OCTEON_H */