Loading...
1/*
2 *
3 * BRIEF MODULE DESCRIPTION
4 * The Descriptor Based DMA channel manager that first appeared
5 * on the Au1550. I started with dma.c, but I think all that is
6 * left is this initial comment :-)
7 *
8 * Copyright 2004 Embedded Edge, LLC
9 * dan@embeddededge.com
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
18 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
19 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
22 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
23 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 *
27 * You should have received a copy of the GNU General Public License along
28 * with this program; if not, write to the Free Software Foundation, Inc.,
29 * 675 Mass Ave, Cambridge, MA 02139, USA.
30 *
31 */
32
33#include <linux/init.h>
34#include <linux/kernel.h>
35#include <linux/slab.h>
36#include <linux/spinlock.h>
37#include <linux/interrupt.h>
38#include <linux/module.h>
39#include <linux/syscore_ops.h>
40#include <asm/mach-au1x00/au1000.h>
41#include <asm/mach-au1x00/au1xxx_dbdma.h>
42
43/*
44 * The Descriptor Based DMA supports up to 16 channels.
45 *
46 * There are 32 devices defined. We keep an internal structure
47 * of devices using these channels, along with additional
48 * information.
49 *
50 * We allocate the descriptors and allow access to them through various
51 * functions. The drivers allocate the data buffers and assign them
52 * to the descriptors.
53 */
54static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
55
56/* I couldn't find a macro that did this... */
57#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
58
59static dbdma_global_t *dbdma_gptr =
60 (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
61static int dbdma_initialized;
62
63static dbdev_tab_t *dbdev_tab;
64
65static dbdev_tab_t au1550_dbdev_tab[] __initdata = {
66 /* UARTS */
67 { AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
68 { AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
69 { AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
70 { AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 },
71
72 /* EXT DMA */
73 { AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
74 { AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
75 { AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
76 { AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
77
78 /* USB DEV */
79 { AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 },
80 { AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
81 { AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
82 { AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
83 { AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 },
84 { AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 },
85
86 /* PSCs */
87 { AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
88 { AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
89 { AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
90 { AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
91 { AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
92 { AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 },
93 { AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
94 { AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 },
95
96 { AU1550_DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */
97 { AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
98
99 /* MAC 0 */
100 { AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
101 { AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
102
103 /* MAC 1 */
104 { AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
105 { AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
106
107 { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
108 { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
109};
110
111static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
112 { AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
113 { AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
114 { AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
115 { AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 },
116
117 { AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
118 { AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
119
120 { AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
121 { AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
122 { AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
123 { AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
124
125 { AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
126 { AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
127 { AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
128 { AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
129
130 { AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
131 { AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
132
133 { AU1200_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
134 { AU1200_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
135 { AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
136 { AU1200_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
137 { AU1200_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
138 { AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
139
140 { AU1200_DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
141 { AU1200_DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
142 { AU1200_DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
143 { AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
144
145 { AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
146
147 { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
148 { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
149};
150
151static dbdev_tab_t au1300_dbdev_tab[] __initdata = {
152 { AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x10100004, 0, 0 },
153 { AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x10100000, 0, 0 },
154 { AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x10101004, 0, 0 },
155 { AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x10101000, 0, 0 },
156 { AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8, 0x10102004, 0, 0 },
157 { AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN, 0, 8, 0x10102000, 0, 0 },
158 { AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x10103004, 0, 0 },
159 { AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x10103000, 0, 0 },
160
161 { AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
162 { AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
163 { AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8, 0x10601000, 0, 0 },
164 { AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 8, 8, 0x10601004, 0, 0 },
165
166 { AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
167 { AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
168
169 { AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0001c, 0, 0 },
170 { AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x10a0001c, 0, 0 },
171 { AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0101c, 0, 0 },
172 { AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x10a0101c, 0, 0 },
173 { AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0201c, 0, 0 },
174 { AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 16, 0x10a0201c, 0, 0 },
175 { AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0301c, 0, 0 },
176 { AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 16, 0x10a0301c, 0, 0 },
177
178 { AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
179 { AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
180
181 { AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8, 0x10602000, 0, 0 },
182 { AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN, 4, 8, 0x10602004, 0, 0 },
183
184 { AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
185
186 { AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE, 0, 32, 0x14001810, 0, 0 },
187
188 { AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
189 { AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
190
191 { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
192 { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
193};
194
195/* 32 predefined plus 32 custom */
196#define DBDEV_TAB_SIZE 64
197
198static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
199
200static dbdev_tab_t *find_dbdev_id(u32 id)
201{
202 int i;
203 dbdev_tab_t *p;
204 for (i = 0; i < DBDEV_TAB_SIZE; ++i) {
205 p = &dbdev_tab[i];
206 if (p->dev_id == id)
207 return p;
208 }
209 return NULL;
210}
211
212void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
213{
214 return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
215}
216EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
217
218u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
219{
220 u32 ret = 0;
221 dbdev_tab_t *p;
222 static u16 new_id = 0x1000;
223
224 p = find_dbdev_id(~0);
225 if (NULL != p) {
226 memcpy(p, dev, sizeof(dbdev_tab_t));
227 p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
228 ret = p->dev_id;
229 new_id++;
230#if 0
231 printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
232 p->dev_id, p->dev_flags, p->dev_physaddr);
233#endif
234 }
235
236 return ret;
237}
238EXPORT_SYMBOL(au1xxx_ddma_add_device);
239
240void au1xxx_ddma_del_device(u32 devid)
241{
242 dbdev_tab_t *p = find_dbdev_id(devid);
243
244 if (p != NULL) {
245 memset(p, 0, sizeof(dbdev_tab_t));
246 p->dev_id = ~0;
247 }
248}
249EXPORT_SYMBOL(au1xxx_ddma_del_device);
250
251/* Allocate a channel and return a non-zero descriptor if successful. */
252u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
253 void (*callback)(int, void *), void *callparam)
254{
255 unsigned long flags;
256 u32 used, chan;
257 u32 dcp;
258 int i;
259 dbdev_tab_t *stp, *dtp;
260 chan_tab_t *ctp;
261 au1x_dma_chan_t *cp;
262
263 /*
264 * We do the initialization on the first channel allocation.
265 * We have to wait because of the interrupt handler initialization
266 * which can't be done successfully during board set up.
267 */
268 if (!dbdma_initialized)
269 return 0;
270
271 stp = find_dbdev_id(srcid);
272 if (stp == NULL)
273 return 0;
274 dtp = find_dbdev_id(destid);
275 if (dtp == NULL)
276 return 0;
277
278 used = 0;
279
280 /* Check to see if we can get both channels. */
281 spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
282 if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
283 (stp->dev_flags & DEV_FLAGS_ANYUSE)) {
284 /* Got source */
285 stp->dev_flags |= DEV_FLAGS_INUSE;
286 if (!(dtp->dev_flags & DEV_FLAGS_INUSE) ||
287 (dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
288 /* Got destination */
289 dtp->dev_flags |= DEV_FLAGS_INUSE;
290 } else {
291 /* Can't get dest. Release src. */
292 stp->dev_flags &= ~DEV_FLAGS_INUSE;
293 used++;
294 }
295 } else
296 used++;
297 spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
298
299 if (used)
300 return 0;
301
302 /* Let's see if we can allocate a channel for it. */
303 ctp = NULL;
304 chan = 0;
305 spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
306 for (i = 0; i < NUM_DBDMA_CHANS; i++)
307 if (chan_tab_ptr[i] == NULL) {
308 /*
309 * If kmalloc fails, it is caught below same
310 * as a channel not available.
311 */
312 ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
313 chan_tab_ptr[i] = ctp;
314 break;
315 }
316 spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
317
318 if (ctp != NULL) {
319 memset(ctp, 0, sizeof(chan_tab_t));
320 ctp->chan_index = chan = i;
321 dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
322 dcp += (0x0100 * chan);
323 ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
324 cp = (au1x_dma_chan_t *)dcp;
325 ctp->chan_src = stp;
326 ctp->chan_dest = dtp;
327 ctp->chan_callback = callback;
328 ctp->chan_callparam = callparam;
329
330 /* Initialize channel configuration. */
331 i = 0;
332 if (stp->dev_intlevel)
333 i |= DDMA_CFG_SED;
334 if (stp->dev_intpolarity)
335 i |= DDMA_CFG_SP;
336 if (dtp->dev_intlevel)
337 i |= DDMA_CFG_DED;
338 if (dtp->dev_intpolarity)
339 i |= DDMA_CFG_DP;
340 if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
341 (dtp->dev_flags & DEV_FLAGS_SYNC))
342 i |= DDMA_CFG_SYNC;
343 cp->ddma_cfg = i;
344 wmb(); /* drain writebuffer */
345
346 /*
347 * Return a non-zero value that can be used to find the channel
348 * information in subsequent operations.
349 */
350 return (u32)(&chan_tab_ptr[chan]);
351 }
352
353 /* Release devices */
354 stp->dev_flags &= ~DEV_FLAGS_INUSE;
355 dtp->dev_flags &= ~DEV_FLAGS_INUSE;
356
357 return 0;
358}
359EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
360
361/*
362 * Set the device width if source or destination is a FIFO.
363 * Should be 8, 16, or 32 bits.
364 */
365u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
366{
367 u32 rv;
368 chan_tab_t *ctp;
369 dbdev_tab_t *stp, *dtp;
370
371 ctp = *((chan_tab_t **)chanid);
372 stp = ctp->chan_src;
373 dtp = ctp->chan_dest;
374 rv = 0;
375
376 if (stp->dev_flags & DEV_FLAGS_IN) { /* Source in fifo */
377 rv = stp->dev_devwidth;
378 stp->dev_devwidth = bits;
379 }
380 if (dtp->dev_flags & DEV_FLAGS_OUT) { /* Destination out fifo */
381 rv = dtp->dev_devwidth;
382 dtp->dev_devwidth = bits;
383 }
384
385 return rv;
386}
387EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
388
389/* Allocate a descriptor ring, initializing as much as possible. */
390u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
391{
392 int i;
393 u32 desc_base, srcid, destid;
394 u32 cmd0, cmd1, src1, dest1;
395 u32 src0, dest0;
396 chan_tab_t *ctp;
397 dbdev_tab_t *stp, *dtp;
398 au1x_ddma_desc_t *dp;
399
400 /*
401 * I guess we could check this to be within the
402 * range of the table......
403 */
404 ctp = *((chan_tab_t **)chanid);
405 stp = ctp->chan_src;
406 dtp = ctp->chan_dest;
407
408 /*
409 * The descriptors must be 32-byte aligned. There is a
410 * possibility the allocation will give us such an address,
411 * and if we try that first we are likely to not waste larger
412 * slabs of memory.
413 */
414 desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
415 GFP_KERNEL|GFP_DMA);
416 if (desc_base == 0)
417 return 0;
418
419 if (desc_base & 0x1f) {
420 /*
421 * Lost....do it again, allocate extra, and round
422 * the address base.
423 */
424 kfree((const void *)desc_base);
425 i = entries * sizeof(au1x_ddma_desc_t);
426 i += (sizeof(au1x_ddma_desc_t) - 1);
427 desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
428 if (desc_base == 0)
429 return 0;
430
431 ctp->cdb_membase = desc_base;
432 desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
433 } else
434 ctp->cdb_membase = desc_base;
435
436 dp = (au1x_ddma_desc_t *)desc_base;
437
438 /* Keep track of the base descriptor. */
439 ctp->chan_desc_base = dp;
440
441 /* Initialize the rings with as much information as we know. */
442 srcid = stp->dev_id;
443 destid = dtp->dev_id;
444
445 cmd0 = cmd1 = src1 = dest1 = 0;
446 src0 = dest0 = 0;
447
448 cmd0 |= DSCR_CMD0_SID(srcid);
449 cmd0 |= DSCR_CMD0_DID(destid);
450 cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
451 cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
452
453 /* Is it mem to mem transfer? */
454 if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
455 (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
456 ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
457 (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
458 cmd0 |= DSCR_CMD0_MEM;
459
460 switch (stp->dev_devwidth) {
461 case 8:
462 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE);
463 break;
464 case 16:
465 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD);
466 break;
467 case 32:
468 default:
469 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD);
470 break;
471 }
472
473 switch (dtp->dev_devwidth) {
474 case 8:
475 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE);
476 break;
477 case 16:
478 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD);
479 break;
480 case 32:
481 default:
482 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD);
483 break;
484 }
485
486 /*
487 * If the device is marked as an in/out FIFO, ensure it is
488 * set non-coherent.
489 */
490 if (stp->dev_flags & DEV_FLAGS_IN)
491 cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */
492 if (dtp->dev_flags & DEV_FLAGS_OUT)
493 cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */
494
495 /*
496 * Set up source1. For now, assume no stride and increment.
497 * A channel attribute update can change this later.
498 */
499 switch (stp->dev_tsize) {
500 case 1:
501 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1);
502 break;
503 case 2:
504 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2);
505 break;
506 case 4:
507 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4);
508 break;
509 case 8:
510 default:
511 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8);
512 break;
513 }
514
515 /* If source input is FIFO, set static address. */
516 if (stp->dev_flags & DEV_FLAGS_IN) {
517 if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
518 src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
519 else
520 src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
521 }
522
523 if (stp->dev_physaddr)
524 src0 = stp->dev_physaddr;
525
526 /*
527 * Set up dest1. For now, assume no stride and increment.
528 * A channel attribute update can change this later.
529 */
530 switch (dtp->dev_tsize) {
531 case 1:
532 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1);
533 break;
534 case 2:
535 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2);
536 break;
537 case 4:
538 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4);
539 break;
540 case 8:
541 default:
542 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8);
543 break;
544 }
545
546 /* If destination output is FIFO, set static address. */
547 if (dtp->dev_flags & DEV_FLAGS_OUT) {
548 if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
549 dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
550 else
551 dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
552 }
553
554 if (dtp->dev_physaddr)
555 dest0 = dtp->dev_physaddr;
556
557#if 0
558 printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
559 "source1:%x dest0:%x dest1:%x\n",
560 dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
561 src1, dest0, dest1);
562#endif
563 for (i = 0; i < entries; i++) {
564 dp->dscr_cmd0 = cmd0;
565 dp->dscr_cmd1 = cmd1;
566 dp->dscr_source0 = src0;
567 dp->dscr_source1 = src1;
568 dp->dscr_dest0 = dest0;
569 dp->dscr_dest1 = dest1;
570 dp->dscr_stat = 0;
571 dp->sw_context = 0;
572 dp->sw_status = 0;
573 dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
574 dp++;
575 }
576
577 /* Make last descrptor point to the first. */
578 dp--;
579 dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
580 ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
581
582 return (u32)ctp->chan_desc_base;
583}
584EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
585
586/*
587 * Put a source buffer into the DMA ring.
588 * This updates the source pointer and byte count. Normally used
589 * for memory to fifo transfers.
590 */
591u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
592{
593 chan_tab_t *ctp;
594 au1x_ddma_desc_t *dp;
595
596 /*
597 * I guess we could check this to be within the
598 * range of the table......
599 */
600 ctp = *(chan_tab_t **)chanid;
601
602 /*
603 * We should have multiple callers for a particular channel,
604 * an interrupt doesn't affect this pointer nor the descriptor,
605 * so no locking should be needed.
606 */
607 dp = ctp->put_ptr;
608
609 /*
610 * If the descriptor is valid, we are way ahead of the DMA
611 * engine, so just return an error condition.
612 */
613 if (dp->dscr_cmd0 & DSCR_CMD0_V)
614 return 0;
615
616 /* Load up buffer address and byte count. */
617 dp->dscr_source0 = buf & ~0UL;
618 dp->dscr_cmd1 = nbytes;
619 /* Check flags */
620 if (flags & DDMA_FLAGS_IE)
621 dp->dscr_cmd0 |= DSCR_CMD0_IE;
622 if (flags & DDMA_FLAGS_NOIE)
623 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
624
625 /*
626 * There is an errata on the Au1200/Au1550 parts that could result
627 * in "stale" data being DMA'ed. It has to do with the snoop logic on
628 * the cache eviction buffer. DMA_NONCOHERENT is on by default for
629 * these parts. If it is fixed in the future, these dma_cache_inv will
630 * just be nothing more than empty macros. See io.h.
631 */
632 dma_cache_wback_inv((unsigned long)buf, nbytes);
633 dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
634 wmb(); /* drain writebuffer */
635 dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
636 ctp->chan_ptr->ddma_dbell = 0;
637
638 /* Get next descriptor pointer. */
639 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
640
641 /* Return something non-zero. */
642 return nbytes;
643}
644EXPORT_SYMBOL(au1xxx_dbdma_put_source);
645
646/* Put a destination buffer into the DMA ring.
647 * This updates the destination pointer and byte count. Normally used
648 * to place an empty buffer into the ring for fifo to memory transfers.
649 */
650u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
651{
652 chan_tab_t *ctp;
653 au1x_ddma_desc_t *dp;
654
655 /* I guess we could check this to be within the
656 * range of the table......
657 */
658 ctp = *((chan_tab_t **)chanid);
659
660 /* We should have multiple callers for a particular channel,
661 * an interrupt doesn't affect this pointer nor the descriptor,
662 * so no locking should be needed.
663 */
664 dp = ctp->put_ptr;
665
666 /* If the descriptor is valid, we are way ahead of the DMA
667 * engine, so just return an error condition.
668 */
669 if (dp->dscr_cmd0 & DSCR_CMD0_V)
670 return 0;
671
672 /* Load up buffer address and byte count */
673
674 /* Check flags */
675 if (flags & DDMA_FLAGS_IE)
676 dp->dscr_cmd0 |= DSCR_CMD0_IE;
677 if (flags & DDMA_FLAGS_NOIE)
678 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
679
680 dp->dscr_dest0 = buf & ~0UL;
681 dp->dscr_cmd1 = nbytes;
682#if 0
683 printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
684 dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
685 dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
686#endif
687 /*
688 * There is an errata on the Au1200/Au1550 parts that could result in
689 * "stale" data being DMA'ed. It has to do with the snoop logic on the
690 * cache eviction buffer. DMA_NONCOHERENT is on by default for these
691 * parts. If it is fixed in the future, these dma_cache_inv will just
692 * be nothing more than empty macros. See io.h.
693 */
694 dma_cache_inv((unsigned long)buf, nbytes);
695 dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
696 wmb(); /* drain writebuffer */
697 dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
698 ctp->chan_ptr->ddma_dbell = 0;
699
700 /* Get next descriptor pointer. */
701 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
702
703 /* Return something non-zero. */
704 return nbytes;
705}
706EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
707
708/*
709 * Get a destination buffer into the DMA ring.
710 * Normally used to get a full buffer from the ring during fifo
711 * to memory transfers. This does not set the valid bit, you will
712 * have to put another destination buffer to keep the DMA going.
713 */
714u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
715{
716 chan_tab_t *ctp;
717 au1x_ddma_desc_t *dp;
718 u32 rv;
719
720 /*
721 * I guess we could check this to be within the
722 * range of the table......
723 */
724 ctp = *((chan_tab_t **)chanid);
725
726 /*
727 * We should have multiple callers for a particular channel,
728 * an interrupt doesn't affect this pointer nor the descriptor,
729 * so no locking should be needed.
730 */
731 dp = ctp->get_ptr;
732
733 /*
734 * If the descriptor is valid, we are way ahead of the DMA
735 * engine, so just return an error condition.
736 */
737 if (dp->dscr_cmd0 & DSCR_CMD0_V)
738 return 0;
739
740 /* Return buffer address and byte count. */
741 *buf = (void *)(phys_to_virt(dp->dscr_dest0));
742 *nbytes = dp->dscr_cmd1;
743 rv = dp->dscr_stat;
744
745 /* Get next descriptor pointer. */
746 ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
747
748 /* Return something non-zero. */
749 return rv;
750}
751EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
752
753void au1xxx_dbdma_stop(u32 chanid)
754{
755 chan_tab_t *ctp;
756 au1x_dma_chan_t *cp;
757 int halt_timeout = 0;
758
759 ctp = *((chan_tab_t **)chanid);
760
761 cp = ctp->chan_ptr;
762 cp->ddma_cfg &= ~DDMA_CFG_EN; /* Disable channel */
763 wmb(); /* drain writebuffer */
764 while (!(cp->ddma_stat & DDMA_STAT_H)) {
765 udelay(1);
766 halt_timeout++;
767 if (halt_timeout > 100) {
768 printk(KERN_WARNING "warning: DMA channel won't halt\n");
769 break;
770 }
771 }
772 /* clear current desc valid and doorbell */
773 cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
774 wmb(); /* drain writebuffer */
775}
776EXPORT_SYMBOL(au1xxx_dbdma_stop);
777
778/*
779 * Start using the current descriptor pointer. If the DBDMA encounters
780 * a non-valid descriptor, it will stop. In this case, we can just
781 * continue by adding a buffer to the list and starting again.
782 */
783void au1xxx_dbdma_start(u32 chanid)
784{
785 chan_tab_t *ctp;
786 au1x_dma_chan_t *cp;
787
788 ctp = *((chan_tab_t **)chanid);
789 cp = ctp->chan_ptr;
790 cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
791 cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */
792 wmb(); /* drain writebuffer */
793 cp->ddma_dbell = 0;
794 wmb(); /* drain writebuffer */
795}
796EXPORT_SYMBOL(au1xxx_dbdma_start);
797
798void au1xxx_dbdma_reset(u32 chanid)
799{
800 chan_tab_t *ctp;
801 au1x_ddma_desc_t *dp;
802
803 au1xxx_dbdma_stop(chanid);
804
805 ctp = *((chan_tab_t **)chanid);
806 ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
807
808 /* Run through the descriptors and reset the valid indicator. */
809 dp = ctp->chan_desc_base;
810
811 do {
812 dp->dscr_cmd0 &= ~DSCR_CMD0_V;
813 /*
814 * Reset our software status -- this is used to determine
815 * if a descriptor is in use by upper level software. Since
816 * posting can reset 'V' bit.
817 */
818 dp->sw_status = 0;
819 dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
820 } while (dp != ctp->chan_desc_base);
821}
822EXPORT_SYMBOL(au1xxx_dbdma_reset);
823
824u32 au1xxx_get_dma_residue(u32 chanid)
825{
826 chan_tab_t *ctp;
827 au1x_dma_chan_t *cp;
828 u32 rv;
829
830 ctp = *((chan_tab_t **)chanid);
831 cp = ctp->chan_ptr;
832
833 /* This is only valid if the channel is stopped. */
834 rv = cp->ddma_bytecnt;
835 wmb(); /* drain writebuffer */
836
837 return rv;
838}
839EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
840
841void au1xxx_dbdma_chan_free(u32 chanid)
842{
843 chan_tab_t *ctp;
844 dbdev_tab_t *stp, *dtp;
845
846 ctp = *((chan_tab_t **)chanid);
847 stp = ctp->chan_src;
848 dtp = ctp->chan_dest;
849
850 au1xxx_dbdma_stop(chanid);
851
852 kfree((void *)ctp->cdb_membase);
853
854 stp->dev_flags &= ~DEV_FLAGS_INUSE;
855 dtp->dev_flags &= ~DEV_FLAGS_INUSE;
856 chan_tab_ptr[ctp->chan_index] = NULL;
857
858 kfree(ctp);
859}
860EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
861
862static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
863{
864 u32 intstat;
865 u32 chan_index;
866 chan_tab_t *ctp;
867 au1x_ddma_desc_t *dp;
868 au1x_dma_chan_t *cp;
869
870 intstat = dbdma_gptr->ddma_intstat;
871 wmb(); /* drain writebuffer */
872 chan_index = __ffs(intstat);
873
874 ctp = chan_tab_ptr[chan_index];
875 cp = ctp->chan_ptr;
876 dp = ctp->cur_ptr;
877
878 /* Reset interrupt. */
879 cp->ddma_irq = 0;
880 wmb(); /* drain writebuffer */
881
882 if (ctp->chan_callback)
883 ctp->chan_callback(irq, ctp->chan_callparam);
884
885 ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
886 return IRQ_RETVAL(1);
887}
888
889void au1xxx_dbdma_dump(u32 chanid)
890{
891 chan_tab_t *ctp;
892 au1x_ddma_desc_t *dp;
893 dbdev_tab_t *stp, *dtp;
894 au1x_dma_chan_t *cp;
895 u32 i = 0;
896
897 ctp = *((chan_tab_t **)chanid);
898 stp = ctp->chan_src;
899 dtp = ctp->chan_dest;
900 cp = ctp->chan_ptr;
901
902 printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n",
903 (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
904 dtp - dbdev_tab);
905 printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
906 (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
907 (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
908
909 printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
910 printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
911 cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
912 printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
913 cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
914 cp->ddma_bytecnt);
915
916 /* Run through the descriptors */
917 dp = ctp->chan_desc_base;
918
919 do {
920 printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
921 i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
922 printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
923 dp->dscr_source0, dp->dscr_source1,
924 dp->dscr_dest0, dp->dscr_dest1);
925 printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
926 dp->dscr_stat, dp->dscr_nxtptr);
927 dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
928 } while (dp != ctp->chan_desc_base);
929}
930
931/* Put a descriptor into the DMA ring.
932 * This updates the source/destination pointers and byte count.
933 */
934u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
935{
936 chan_tab_t *ctp;
937 au1x_ddma_desc_t *dp;
938 u32 nbytes = 0;
939
940 /*
941 * I guess we could check this to be within the
942 * range of the table......
943 */
944 ctp = *((chan_tab_t **)chanid);
945
946 /*
947 * We should have multiple callers for a particular channel,
948 * an interrupt doesn't affect this pointer nor the descriptor,
949 * so no locking should be needed.
950 */
951 dp = ctp->put_ptr;
952
953 /*
954 * If the descriptor is valid, we are way ahead of the DMA
955 * engine, so just return an error condition.
956 */
957 if (dp->dscr_cmd0 & DSCR_CMD0_V)
958 return 0;
959
960 /* Load up buffer addresses and byte count. */
961 dp->dscr_dest0 = dscr->dscr_dest0;
962 dp->dscr_source0 = dscr->dscr_source0;
963 dp->dscr_dest1 = dscr->dscr_dest1;
964 dp->dscr_source1 = dscr->dscr_source1;
965 dp->dscr_cmd1 = dscr->dscr_cmd1;
966 nbytes = dscr->dscr_cmd1;
967 /* Allow the caller to specify if an interrupt is generated */
968 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
969 dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
970 ctp->chan_ptr->ddma_dbell = 0;
971
972 /* Get next descriptor pointer. */
973 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
974
975 /* Return something non-zero. */
976 return nbytes;
977}
978
979
980static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
981
982static int alchemy_dbdma_suspend(void)
983{
984 int i;
985 void __iomem *addr;
986
987 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
988 alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00);
989 alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04);
990 alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08);
991 alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c);
992
993 /* save channel configurations */
994 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
995 for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
996 alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00);
997 alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04);
998 alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08);
999 alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c);
1000 alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10);
1001 alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14);
1002
1003 /* halt channel */
1004 __raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00);
1005 wmb();
1006 while (!(__raw_readl(addr + 0x14) & 1))
1007 wmb();
1008
1009 addr += 0x100; /* next channel base */
1010 }
1011 /* disable channel interrupts */
1012 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
1013 __raw_writel(0, addr + 0x0c);
1014 wmb();
1015
1016 return 0;
1017}
1018
1019static void alchemy_dbdma_resume(void)
1020{
1021 int i;
1022 void __iomem *addr;
1023
1024 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
1025 __raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00);
1026 __raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04);
1027 __raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08);
1028 __raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c);
1029
1030 /* restore channel configurations */
1031 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
1032 for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
1033 __raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00);
1034 __raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04);
1035 __raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08);
1036 __raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c);
1037 __raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10);
1038 __raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14);
1039 wmb();
1040 addr += 0x100; /* next channel base */
1041 }
1042}
1043
1044static struct syscore_ops alchemy_dbdma_syscore_ops = {
1045 .suspend = alchemy_dbdma_suspend,
1046 .resume = alchemy_dbdma_resume,
1047};
1048
1049static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
1050{
1051 int ret;
1052
1053 dbdev_tab = kzalloc(sizeof(dbdev_tab_t) * DBDEV_TAB_SIZE, GFP_KERNEL);
1054 if (!dbdev_tab)
1055 return -ENOMEM;
1056
1057 memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t));
1058 for (ret = 32; ret < DBDEV_TAB_SIZE; ret++)
1059 dbdev_tab[ret].dev_id = ~0;
1060
1061 dbdma_gptr->ddma_config = 0;
1062 dbdma_gptr->ddma_throttle = 0;
1063 dbdma_gptr->ddma_inten = 0xffff;
1064 wmb(); /* drain writebuffer */
1065
1066 ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr);
1067 if (ret)
1068 printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
1069 else {
1070 dbdma_initialized = 1;
1071 register_syscore_ops(&alchemy_dbdma_syscore_ops);
1072 }
1073
1074 return ret;
1075}
1076
1077static int __init alchemy_dbdma_init(void)
1078{
1079 switch (alchemy_get_cputype()) {
1080 case ALCHEMY_CPU_AU1550:
1081 return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
1082 case ALCHEMY_CPU_AU1200:
1083 return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
1084 case ALCHEMY_CPU_AU1300:
1085 return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab);
1086 }
1087 return 0;
1088}
1089subsys_initcall(alchemy_dbdma_init);
1/*
2 *
3 * BRIEF MODULE DESCRIPTION
4 * The Descriptor Based DMA channel manager that first appeared
5 * on the Au1550. I started with dma.c, but I think all that is
6 * left is this initial comment :-)
7 *
8 * Copyright 2004 Embedded Edge, LLC
9 * dan@embeddededge.com
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
18 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
19 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
22 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
23 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 *
27 * You should have received a copy of the GNU General Public License along
28 * with this program; if not, write to the Free Software Foundation, Inc.,
29 * 675 Mass Ave, Cambridge, MA 02139, USA.
30 *
31 */
32
33#include <linux/dma-map-ops.h> /* for dma_default_coherent */
34#include <linux/init.h>
35#include <linux/kernel.h>
36#include <linux/slab.h>
37#include <linux/spinlock.h>
38#include <linux/interrupt.h>
39#include <linux/export.h>
40#include <linux/syscore_ops.h>
41#include <asm/mach-au1x00/au1000.h>
42#include <asm/mach-au1x00/au1xxx_dbdma.h>
43
44/*
45 * The Descriptor Based DMA supports up to 16 channels.
46 *
47 * There are 32 devices defined. We keep an internal structure
48 * of devices using these channels, along with additional
49 * information.
50 *
51 * We allocate the descriptors and allow access to them through various
52 * functions. The drivers allocate the data buffers and assign them
53 * to the descriptors.
54 */
55static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
56
57/* I couldn't find a macro that did this... */
58#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
59
60static dbdma_global_t *dbdma_gptr =
61 (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
62static int dbdma_initialized;
63
64static dbdev_tab_t *dbdev_tab;
65
66static dbdev_tab_t au1550_dbdev_tab[] __initdata = {
67 /* UARTS */
68 { AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
69 { AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
70 { AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
71 { AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 },
72
73 /* EXT DMA */
74 { AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
75 { AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
76 { AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
77 { AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
78
79 /* USB DEV */
80 { AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 },
81 { AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
82 { AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
83 { AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
84 { AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 },
85 { AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 },
86
87 /* PSCs */
88 { AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
89 { AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
90 { AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
91 { AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
92 { AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
93 { AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 },
94 { AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
95 { AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 },
96
97 { AU1550_DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */
98 { AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
99
100 /* MAC 0 */
101 { AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
102 { AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
103
104 /* MAC 1 */
105 { AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
106 { AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
107
108 { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
109 { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
110};
111
112static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
113 { AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
114 { AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
115 { AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
116 { AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 },
117
118 { AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
119 { AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
120
121 { AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
122 { AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
123 { AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
124 { AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
125
126 { AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
127 { AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
128 { AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
129 { AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
130
131 { AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
132 { AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
133
134 { AU1200_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
135 { AU1200_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
136 { AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
137 { AU1200_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
138 { AU1200_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
139 { AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
140
141 { AU1200_DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
142 { AU1200_DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
143 { AU1200_DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
144 { AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
145
146 { AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
147
148 { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
149 { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
150};
151
152static dbdev_tab_t au1300_dbdev_tab[] __initdata = {
153 { AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x10100004, 0, 0 },
154 { AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x10100000, 0, 0 },
155 { AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x10101004, 0, 0 },
156 { AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x10101000, 0, 0 },
157 { AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8, 0x10102004, 0, 0 },
158 { AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN, 0, 8, 0x10102000, 0, 0 },
159 { AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x10103004, 0, 0 },
160 { AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x10103000, 0, 0 },
161
162 { AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
163 { AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
164 { AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8, 0x10601000, 0, 0 },
165 { AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 8, 8, 0x10601004, 0, 0 },
166
167 { AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
168 { AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
169
170 { AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0001c, 0, 0 },
171 { AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x10a0001c, 0, 0 },
172 { AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0101c, 0, 0 },
173 { AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x10a0101c, 0, 0 },
174 { AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0201c, 0, 0 },
175 { AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 16, 0x10a0201c, 0, 0 },
176 { AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0301c, 0, 0 },
177 { AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 16, 0x10a0301c, 0, 0 },
178
179 { AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
180 { AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
181
182 { AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8, 0x10602000, 0, 0 },
183 { AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN, 4, 8, 0x10602004, 0, 0 },
184
185 { AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
186
187 { AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE, 0, 32, 0x14001810, 0, 0 },
188
189 { AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
190 { AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
191
192 { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
193 { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
194};
195
196/* 32 predefined plus 32 custom */
197#define DBDEV_TAB_SIZE 64
198
199static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
200
201static dbdev_tab_t *find_dbdev_id(u32 id)
202{
203 int i;
204 dbdev_tab_t *p;
205 for (i = 0; i < DBDEV_TAB_SIZE; ++i) {
206 p = &dbdev_tab[i];
207 if (p->dev_id == id)
208 return p;
209 }
210 return NULL;
211}
212
213void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
214{
215 return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
216}
217EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
218
219u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
220{
221 u32 ret = 0;
222 dbdev_tab_t *p;
223 static u16 new_id = 0x1000;
224
225 p = find_dbdev_id(~0);
226 if (NULL != p) {
227 memcpy(p, dev, sizeof(dbdev_tab_t));
228 p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
229 ret = p->dev_id;
230 new_id++;
231#if 0
232 printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
233 p->dev_id, p->dev_flags, p->dev_physaddr);
234#endif
235 }
236
237 return ret;
238}
239EXPORT_SYMBOL(au1xxx_ddma_add_device);
240
241void au1xxx_ddma_del_device(u32 devid)
242{
243 dbdev_tab_t *p = find_dbdev_id(devid);
244
245 if (p != NULL) {
246 memset(p, 0, sizeof(dbdev_tab_t));
247 p->dev_id = ~0;
248 }
249}
250EXPORT_SYMBOL(au1xxx_ddma_del_device);
251
252/* Allocate a channel and return a non-zero descriptor if successful. */
253u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
254 void (*callback)(int, void *), void *callparam)
255{
256 unsigned long flags;
257 u32 used, chan;
258 u32 dcp;
259 int i;
260 dbdev_tab_t *stp, *dtp;
261 chan_tab_t *ctp;
262 au1x_dma_chan_t *cp;
263
264 /*
265 * We do the initialization on the first channel allocation.
266 * We have to wait because of the interrupt handler initialization
267 * which can't be done successfully during board set up.
268 */
269 if (!dbdma_initialized)
270 return 0;
271
272 stp = find_dbdev_id(srcid);
273 if (stp == NULL)
274 return 0;
275 dtp = find_dbdev_id(destid);
276 if (dtp == NULL)
277 return 0;
278
279 used = 0;
280
281 /* Check to see if we can get both channels. */
282 spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
283 if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
284 (stp->dev_flags & DEV_FLAGS_ANYUSE)) {
285 /* Got source */
286 stp->dev_flags |= DEV_FLAGS_INUSE;
287 if (!(dtp->dev_flags & DEV_FLAGS_INUSE) ||
288 (dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
289 /* Got destination */
290 dtp->dev_flags |= DEV_FLAGS_INUSE;
291 } else {
292 /* Can't get dest. Release src. */
293 stp->dev_flags &= ~DEV_FLAGS_INUSE;
294 used++;
295 }
296 } else
297 used++;
298 spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
299
300 if (used)
301 return 0;
302
303 /* Let's see if we can allocate a channel for it. */
304 ctp = NULL;
305 chan = 0;
306 spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
307 for (i = 0; i < NUM_DBDMA_CHANS; i++)
308 if (chan_tab_ptr[i] == NULL) {
309 /*
310 * If kmalloc fails, it is caught below same
311 * as a channel not available.
312 */
313 ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
314 chan_tab_ptr[i] = ctp;
315 break;
316 }
317 spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
318
319 if (ctp != NULL) {
320 memset(ctp, 0, sizeof(chan_tab_t));
321 ctp->chan_index = chan = i;
322 dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
323 dcp += (0x0100 * chan);
324 ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
325 cp = (au1x_dma_chan_t *)dcp;
326 ctp->chan_src = stp;
327 ctp->chan_dest = dtp;
328 ctp->chan_callback = callback;
329 ctp->chan_callparam = callparam;
330
331 /* Initialize channel configuration. */
332 i = 0;
333 if (stp->dev_intlevel)
334 i |= DDMA_CFG_SED;
335 if (stp->dev_intpolarity)
336 i |= DDMA_CFG_SP;
337 if (dtp->dev_intlevel)
338 i |= DDMA_CFG_DED;
339 if (dtp->dev_intpolarity)
340 i |= DDMA_CFG_DP;
341 if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
342 (dtp->dev_flags & DEV_FLAGS_SYNC))
343 i |= DDMA_CFG_SYNC;
344 cp->ddma_cfg = i;
345 wmb(); /* drain writebuffer */
346
347 /*
348 * Return a non-zero value that can be used to find the channel
349 * information in subsequent operations.
350 */
351 return (u32)(&chan_tab_ptr[chan]);
352 }
353
354 /* Release devices */
355 stp->dev_flags &= ~DEV_FLAGS_INUSE;
356 dtp->dev_flags &= ~DEV_FLAGS_INUSE;
357
358 return 0;
359}
360EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
361
362/*
363 * Set the device width if source or destination is a FIFO.
364 * Should be 8, 16, or 32 bits.
365 */
366u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
367{
368 u32 rv;
369 chan_tab_t *ctp;
370 dbdev_tab_t *stp, *dtp;
371
372 ctp = *((chan_tab_t **)chanid);
373 stp = ctp->chan_src;
374 dtp = ctp->chan_dest;
375 rv = 0;
376
377 if (stp->dev_flags & DEV_FLAGS_IN) { /* Source in fifo */
378 rv = stp->dev_devwidth;
379 stp->dev_devwidth = bits;
380 }
381 if (dtp->dev_flags & DEV_FLAGS_OUT) { /* Destination out fifo */
382 rv = dtp->dev_devwidth;
383 dtp->dev_devwidth = bits;
384 }
385
386 return rv;
387}
388EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
389
390/* Allocate a descriptor ring, initializing as much as possible. */
391u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
392{
393 int i;
394 u32 desc_base, srcid, destid;
395 u32 cmd0, cmd1, src1, dest1;
396 u32 src0, dest0;
397 chan_tab_t *ctp;
398 dbdev_tab_t *stp, *dtp;
399 au1x_ddma_desc_t *dp;
400
401 /*
402 * I guess we could check this to be within the
403 * range of the table......
404 */
405 ctp = *((chan_tab_t **)chanid);
406 stp = ctp->chan_src;
407 dtp = ctp->chan_dest;
408
409 /*
410 * The descriptors must be 32-byte aligned. There is a
411 * possibility the allocation will give us such an address,
412 * and if we try that first we are likely to not waste larger
413 * slabs of memory.
414 */
415 desc_base = (u32)kmalloc_array(entries, sizeof(au1x_ddma_desc_t),
416 GFP_KERNEL|GFP_DMA);
417 if (desc_base == 0)
418 return 0;
419
420 if (desc_base & 0x1f) {
421 /*
422 * Lost....do it again, allocate extra, and round
423 * the address base.
424 */
425 kfree((const void *)desc_base);
426 i = entries * sizeof(au1x_ddma_desc_t);
427 i += (sizeof(au1x_ddma_desc_t) - 1);
428 desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
429 if (desc_base == 0)
430 return 0;
431
432 ctp->cdb_membase = desc_base;
433 desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
434 } else
435 ctp->cdb_membase = desc_base;
436
437 dp = (au1x_ddma_desc_t *)desc_base;
438
439 /* Keep track of the base descriptor. */
440 ctp->chan_desc_base = dp;
441
442 /* Initialize the rings with as much information as we know. */
443 srcid = stp->dev_id;
444 destid = dtp->dev_id;
445
446 cmd0 = cmd1 = src1 = dest1 = 0;
447 src0 = dest0 = 0;
448
449 cmd0 |= DSCR_CMD0_SID(srcid);
450 cmd0 |= DSCR_CMD0_DID(destid);
451 cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
452 cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
453
454 /* Is it mem to mem transfer? */
455 if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
456 (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
457 ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
458 (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
459 cmd0 |= DSCR_CMD0_MEM;
460
461 switch (stp->dev_devwidth) {
462 case 8:
463 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE);
464 break;
465 case 16:
466 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD);
467 break;
468 case 32:
469 default:
470 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD);
471 break;
472 }
473
474 switch (dtp->dev_devwidth) {
475 case 8:
476 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE);
477 break;
478 case 16:
479 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD);
480 break;
481 case 32:
482 default:
483 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD);
484 break;
485 }
486
487 /*
488 * If the device is marked as an in/out FIFO, ensure it is
489 * set non-coherent.
490 */
491 if (stp->dev_flags & DEV_FLAGS_IN)
492 cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */
493 if (dtp->dev_flags & DEV_FLAGS_OUT)
494 cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */
495
496 /*
497 * Set up source1. For now, assume no stride and increment.
498 * A channel attribute update can change this later.
499 */
500 switch (stp->dev_tsize) {
501 case 1:
502 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1);
503 break;
504 case 2:
505 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2);
506 break;
507 case 4:
508 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4);
509 break;
510 case 8:
511 default:
512 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8);
513 break;
514 }
515
516 /* If source input is FIFO, set static address. */
517 if (stp->dev_flags & DEV_FLAGS_IN) {
518 if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
519 src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
520 else
521 src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
522 }
523
524 if (stp->dev_physaddr)
525 src0 = stp->dev_physaddr;
526
527 /*
528 * Set up dest1. For now, assume no stride and increment.
529 * A channel attribute update can change this later.
530 */
531 switch (dtp->dev_tsize) {
532 case 1:
533 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1);
534 break;
535 case 2:
536 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2);
537 break;
538 case 4:
539 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4);
540 break;
541 case 8:
542 default:
543 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8);
544 break;
545 }
546
547 /* If destination output is FIFO, set static address. */
548 if (dtp->dev_flags & DEV_FLAGS_OUT) {
549 if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
550 dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
551 else
552 dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
553 }
554
555 if (dtp->dev_physaddr)
556 dest0 = dtp->dev_physaddr;
557
558#if 0
559 printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
560 "source1:%x dest0:%x dest1:%x\n",
561 dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
562 src1, dest0, dest1);
563#endif
564 for (i = 0; i < entries; i++) {
565 dp->dscr_cmd0 = cmd0;
566 dp->dscr_cmd1 = cmd1;
567 dp->dscr_source0 = src0;
568 dp->dscr_source1 = src1;
569 dp->dscr_dest0 = dest0;
570 dp->dscr_dest1 = dest1;
571 dp->dscr_stat = 0;
572 dp->sw_context = 0;
573 dp->sw_status = 0;
574 dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
575 dp++;
576 }
577
578 /* Make last descriptor point to the first. */
579 dp--;
580 dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
581 ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
582
583 return (u32)ctp->chan_desc_base;
584}
585EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
586
587/*
588 * Put a source buffer into the DMA ring.
589 * This updates the source pointer and byte count. Normally used
590 * for memory to fifo transfers.
591 */
592u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
593{
594 chan_tab_t *ctp;
595 au1x_ddma_desc_t *dp;
596
597 /*
598 * I guess we could check this to be within the
599 * range of the table......
600 */
601 ctp = *(chan_tab_t **)chanid;
602
603 /*
604 * We should have multiple callers for a particular channel,
605 * an interrupt doesn't affect this pointer nor the descriptor,
606 * so no locking should be needed.
607 */
608 dp = ctp->put_ptr;
609
610 /*
611 * If the descriptor is valid, we are way ahead of the DMA
612 * engine, so just return an error condition.
613 */
614 if (dp->dscr_cmd0 & DSCR_CMD0_V)
615 return 0;
616
617 /* Load up buffer address and byte count. */
618 dp->dscr_source0 = buf & ~0UL;
619 dp->dscr_cmd1 = nbytes;
620 /* Check flags */
621 if (flags & DDMA_FLAGS_IE)
622 dp->dscr_cmd0 |= DSCR_CMD0_IE;
623 if (flags & DDMA_FLAGS_NOIE)
624 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
625
626 /*
627 * There is an erratum on certain Au1200/Au1550 revisions that could
628 * result in "stale" data being DMA'ed. It has to do with the snoop
629 * logic on the cache eviction buffer. dma_default_coherent is set
630 * to false on these parts.
631 */
632 if (!dma_default_coherent)
633 dma_cache_wback_inv(KSEG0ADDR(buf), nbytes);
634 dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
635 wmb(); /* drain writebuffer */
636 dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
637 ctp->chan_ptr->ddma_dbell = 0;
638 wmb(); /* force doorbell write out to dma engine */
639
640 /* Get next descriptor pointer. */
641 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
642
643 /* Return something non-zero. */
644 return nbytes;
645}
646EXPORT_SYMBOL(au1xxx_dbdma_put_source);
647
648/* Put a destination buffer into the DMA ring.
649 * This updates the destination pointer and byte count. Normally used
650 * to place an empty buffer into the ring for fifo to memory transfers.
651 */
652u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
653{
654 chan_tab_t *ctp;
655 au1x_ddma_desc_t *dp;
656
657 /* I guess we could check this to be within the
658 * range of the table......
659 */
660 ctp = *((chan_tab_t **)chanid);
661
662 /* We should have multiple callers for a particular channel,
663 * an interrupt doesn't affect this pointer nor the descriptor,
664 * so no locking should be needed.
665 */
666 dp = ctp->put_ptr;
667
668 /* If the descriptor is valid, we are way ahead of the DMA
669 * engine, so just return an error condition.
670 */
671 if (dp->dscr_cmd0 & DSCR_CMD0_V)
672 return 0;
673
674 /* Load up buffer address and byte count */
675
676 /* Check flags */
677 if (flags & DDMA_FLAGS_IE)
678 dp->dscr_cmd0 |= DSCR_CMD0_IE;
679 if (flags & DDMA_FLAGS_NOIE)
680 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
681
682 dp->dscr_dest0 = buf & ~0UL;
683 dp->dscr_cmd1 = nbytes;
684#if 0
685 printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
686 dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
687 dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
688#endif
689 /*
690 * There is an erratum on certain Au1200/Au1550 revisions that could
691 * result in "stale" data being DMA'ed. It has to do with the snoop
692 * logic on the cache eviction buffer. dma_default_coherent is set
693 * to false on these parts.
694 */
695 if (!dma_default_coherent)
696 dma_cache_inv(KSEG0ADDR(buf), nbytes);
697 dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
698 wmb(); /* drain writebuffer */
699 dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
700 ctp->chan_ptr->ddma_dbell = 0;
701 wmb(); /* force doorbell write out to dma engine */
702
703 /* Get next descriptor pointer. */
704 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
705
706 /* Return something non-zero. */
707 return nbytes;
708}
709EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
710
711/*
712 * Get a destination buffer into the DMA ring.
713 * Normally used to get a full buffer from the ring during fifo
714 * to memory transfers. This does not set the valid bit, you will
715 * have to put another destination buffer to keep the DMA going.
716 */
717u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
718{
719 chan_tab_t *ctp;
720 au1x_ddma_desc_t *dp;
721 u32 rv;
722
723 /*
724 * I guess we could check this to be within the
725 * range of the table......
726 */
727 ctp = *((chan_tab_t **)chanid);
728
729 /*
730 * We should have multiple callers for a particular channel,
731 * an interrupt doesn't affect this pointer nor the descriptor,
732 * so no locking should be needed.
733 */
734 dp = ctp->get_ptr;
735
736 /*
737 * If the descriptor is valid, we are way ahead of the DMA
738 * engine, so just return an error condition.
739 */
740 if (dp->dscr_cmd0 & DSCR_CMD0_V)
741 return 0;
742
743 /* Return buffer address and byte count. */
744 *buf = (void *)(phys_to_virt(dp->dscr_dest0));
745 *nbytes = dp->dscr_cmd1;
746 rv = dp->dscr_stat;
747
748 /* Get next descriptor pointer. */
749 ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
750
751 /* Return something non-zero. */
752 return rv;
753}
754EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
755
756void au1xxx_dbdma_stop(u32 chanid)
757{
758 chan_tab_t *ctp;
759 au1x_dma_chan_t *cp;
760 int halt_timeout = 0;
761
762 ctp = *((chan_tab_t **)chanid);
763
764 cp = ctp->chan_ptr;
765 cp->ddma_cfg &= ~DDMA_CFG_EN; /* Disable channel */
766 wmb(); /* drain writebuffer */
767 while (!(cp->ddma_stat & DDMA_STAT_H)) {
768 udelay(1);
769 halt_timeout++;
770 if (halt_timeout > 100) {
771 printk(KERN_WARNING "warning: DMA channel won't halt\n");
772 break;
773 }
774 }
775 /* clear current desc valid and doorbell */
776 cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
777 wmb(); /* drain writebuffer */
778}
779EXPORT_SYMBOL(au1xxx_dbdma_stop);
780
781/*
782 * Start using the current descriptor pointer. If the DBDMA encounters
783 * a non-valid descriptor, it will stop. In this case, we can just
784 * continue by adding a buffer to the list and starting again.
785 */
786void au1xxx_dbdma_start(u32 chanid)
787{
788 chan_tab_t *ctp;
789 au1x_dma_chan_t *cp;
790
791 ctp = *((chan_tab_t **)chanid);
792 cp = ctp->chan_ptr;
793 cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
794 cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */
795 wmb(); /* drain writebuffer */
796 cp->ddma_dbell = 0;
797 wmb(); /* drain writebuffer */
798}
799EXPORT_SYMBOL(au1xxx_dbdma_start);
800
801void au1xxx_dbdma_reset(u32 chanid)
802{
803 chan_tab_t *ctp;
804 au1x_ddma_desc_t *dp;
805
806 au1xxx_dbdma_stop(chanid);
807
808 ctp = *((chan_tab_t **)chanid);
809 ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
810
811 /* Run through the descriptors and reset the valid indicator. */
812 dp = ctp->chan_desc_base;
813
814 do {
815 dp->dscr_cmd0 &= ~DSCR_CMD0_V;
816 /*
817 * Reset our software status -- this is used to determine
818 * if a descriptor is in use by upper level software. Since
819 * posting can reset 'V' bit.
820 */
821 dp->sw_status = 0;
822 dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
823 } while (dp != ctp->chan_desc_base);
824}
825EXPORT_SYMBOL(au1xxx_dbdma_reset);
826
827u32 au1xxx_get_dma_residue(u32 chanid)
828{
829 chan_tab_t *ctp;
830 au1x_dma_chan_t *cp;
831 u32 rv;
832
833 ctp = *((chan_tab_t **)chanid);
834 cp = ctp->chan_ptr;
835
836 /* This is only valid if the channel is stopped. */
837 rv = cp->ddma_bytecnt;
838 wmb(); /* drain writebuffer */
839
840 return rv;
841}
842EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
843
844void au1xxx_dbdma_chan_free(u32 chanid)
845{
846 chan_tab_t *ctp;
847 dbdev_tab_t *stp, *dtp;
848
849 ctp = *((chan_tab_t **)chanid);
850 stp = ctp->chan_src;
851 dtp = ctp->chan_dest;
852
853 au1xxx_dbdma_stop(chanid);
854
855 kfree((void *)ctp->cdb_membase);
856
857 stp->dev_flags &= ~DEV_FLAGS_INUSE;
858 dtp->dev_flags &= ~DEV_FLAGS_INUSE;
859 chan_tab_ptr[ctp->chan_index] = NULL;
860
861 kfree(ctp);
862}
863EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
864
865static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
866{
867 u32 intstat;
868 u32 chan_index;
869 chan_tab_t *ctp;
870 au1x_ddma_desc_t *dp;
871 au1x_dma_chan_t *cp;
872
873 intstat = dbdma_gptr->ddma_intstat;
874 wmb(); /* drain writebuffer */
875 chan_index = __ffs(intstat);
876
877 ctp = chan_tab_ptr[chan_index];
878 cp = ctp->chan_ptr;
879 dp = ctp->cur_ptr;
880
881 /* Reset interrupt. */
882 cp->ddma_irq = 0;
883 wmb(); /* drain writebuffer */
884
885 if (ctp->chan_callback)
886 ctp->chan_callback(irq, ctp->chan_callparam);
887
888 ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
889 return IRQ_RETVAL(1);
890}
891
892void au1xxx_dbdma_dump(u32 chanid)
893{
894 chan_tab_t *ctp;
895 au1x_ddma_desc_t *dp;
896 dbdev_tab_t *stp, *dtp;
897 au1x_dma_chan_t *cp;
898 u32 i = 0;
899
900 ctp = *((chan_tab_t **)chanid);
901 stp = ctp->chan_src;
902 dtp = ctp->chan_dest;
903 cp = ctp->chan_ptr;
904
905 printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n",
906 (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
907 dtp - dbdev_tab);
908 printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
909 (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
910 (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
911
912 printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
913 printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
914 cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
915 printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
916 cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
917 cp->ddma_bytecnt);
918
919 /* Run through the descriptors */
920 dp = ctp->chan_desc_base;
921
922 do {
923 printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
924 i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
925 printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
926 dp->dscr_source0, dp->dscr_source1,
927 dp->dscr_dest0, dp->dscr_dest1);
928 printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
929 dp->dscr_stat, dp->dscr_nxtptr);
930 dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
931 } while (dp != ctp->chan_desc_base);
932}
933
934/* Put a descriptor into the DMA ring.
935 * This updates the source/destination pointers and byte count.
936 */
937u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
938{
939 chan_tab_t *ctp;
940 au1x_ddma_desc_t *dp;
941 u32 nbytes = 0;
942
943 /*
944 * I guess we could check this to be within the
945 * range of the table......
946 */
947 ctp = *((chan_tab_t **)chanid);
948
949 /*
950 * We should have multiple callers for a particular channel,
951 * an interrupt doesn't affect this pointer nor the descriptor,
952 * so no locking should be needed.
953 */
954 dp = ctp->put_ptr;
955
956 /*
957 * If the descriptor is valid, we are way ahead of the DMA
958 * engine, so just return an error condition.
959 */
960 if (dp->dscr_cmd0 & DSCR_CMD0_V)
961 return 0;
962
963 /* Load up buffer addresses and byte count. */
964 dp->dscr_dest0 = dscr->dscr_dest0;
965 dp->dscr_source0 = dscr->dscr_source0;
966 dp->dscr_dest1 = dscr->dscr_dest1;
967 dp->dscr_source1 = dscr->dscr_source1;
968 dp->dscr_cmd1 = dscr->dscr_cmd1;
969 nbytes = dscr->dscr_cmd1;
970 /* Allow the caller to specify if an interrupt is generated */
971 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
972 dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
973 ctp->chan_ptr->ddma_dbell = 0;
974
975 /* Get next descriptor pointer. */
976 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
977
978 /* Return something non-zero. */
979 return nbytes;
980}
981
982
983static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
984
985static int alchemy_dbdma_suspend(void)
986{
987 int i;
988 void __iomem *addr;
989
990 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
991 alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00);
992 alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04);
993 alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08);
994 alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c);
995
996 /* save channel configurations */
997 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
998 for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
999 alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00);
1000 alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04);
1001 alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08);
1002 alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c);
1003 alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10);
1004 alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14);
1005
1006 /* halt channel */
1007 __raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00);
1008 wmb();
1009 while (!(__raw_readl(addr + 0x14) & 1))
1010 wmb();
1011
1012 addr += 0x100; /* next channel base */
1013 }
1014 /* disable channel interrupts */
1015 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
1016 __raw_writel(0, addr + 0x0c);
1017 wmb();
1018
1019 return 0;
1020}
1021
1022static void alchemy_dbdma_resume(void)
1023{
1024 int i;
1025 void __iomem *addr;
1026
1027 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
1028 __raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00);
1029 __raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04);
1030 __raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08);
1031 __raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c);
1032
1033 /* restore channel configurations */
1034 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
1035 for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
1036 __raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00);
1037 __raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04);
1038 __raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08);
1039 __raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c);
1040 __raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10);
1041 __raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14);
1042 wmb();
1043 addr += 0x100; /* next channel base */
1044 }
1045}
1046
1047static struct syscore_ops alchemy_dbdma_syscore_ops = {
1048 .suspend = alchemy_dbdma_suspend,
1049 .resume = alchemy_dbdma_resume,
1050};
1051
1052static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
1053{
1054 int ret;
1055
1056 dbdev_tab = kcalloc(DBDEV_TAB_SIZE, sizeof(dbdev_tab_t), GFP_KERNEL);
1057 if (!dbdev_tab)
1058 return -ENOMEM;
1059
1060 memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t));
1061 for (ret = 32; ret < DBDEV_TAB_SIZE; ret++)
1062 dbdev_tab[ret].dev_id = ~0;
1063
1064 dbdma_gptr->ddma_config = 0;
1065 dbdma_gptr->ddma_throttle = 0;
1066 dbdma_gptr->ddma_inten = 0xffff;
1067 wmb(); /* drain writebuffer */
1068
1069 ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr);
1070 if (ret)
1071 printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
1072 else {
1073 dbdma_initialized = 1;
1074 register_syscore_ops(&alchemy_dbdma_syscore_ops);
1075 }
1076
1077 return ret;
1078}
1079
1080static int __init alchemy_dbdma_init(void)
1081{
1082 switch (alchemy_get_cputype()) {
1083 case ALCHEMY_CPU_AU1550:
1084 return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
1085 case ALCHEMY_CPU_AU1200:
1086 return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
1087 case ALCHEMY_CPU_AU1300:
1088 return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab);
1089 }
1090 return 0;
1091}
1092subsys_initcall(alchemy_dbdma_init);