Loading...
1/*
2 * NCR 5380 defines
3 *
4 * Copyright 1993, Drew Eckhardt
5 * Visionary Computing
6 * (Unix consulting and custom programming)
7 * drew@colorado.edu
8 * +1 (303) 666-5836
9 *
10 * For more information, please consult
11 *
12 * NCR 5380 Family
13 * SCSI Protocol Controller
14 * Databook
15 * NCR Microelectronics
16 * 1635 Aeroplaza Drive
17 * Colorado Springs, CO 80916
18 * 1+ (719) 578-3400
19 * 1+ (800) 334-5454
20 */
21
22#ifndef NCR5380_H
23#define NCR5380_H
24
25#include <linux/delay.h>
26#include <linux/interrupt.h>
27#include <linux/list.h>
28#include <linux/workqueue.h>
29#include <scsi/scsi_dbg.h>
30#include <scsi/scsi_eh.h>
31#include <scsi/scsi_transport_spi.h>
32
33#define NDEBUG_ARBITRATION 0x1
34#define NDEBUG_AUTOSENSE 0x2
35#define NDEBUG_DMA 0x4
36#define NDEBUG_HANDSHAKE 0x8
37#define NDEBUG_INFORMATION 0x10
38#define NDEBUG_INIT 0x20
39#define NDEBUG_INTR 0x40
40#define NDEBUG_LINKED 0x80
41#define NDEBUG_MAIN 0x100
42#define NDEBUG_NO_DATAOUT 0x200
43#define NDEBUG_NO_WRITE 0x400
44#define NDEBUG_PIO 0x800
45#define NDEBUG_PSEUDO_DMA 0x1000
46#define NDEBUG_QUEUES 0x2000
47#define NDEBUG_RESELECTION 0x4000
48#define NDEBUG_SELECTION 0x8000
49#define NDEBUG_USLEEP 0x10000
50#define NDEBUG_LAST_BYTE_SENT 0x20000
51#define NDEBUG_RESTART_SELECT 0x40000
52#define NDEBUG_EXTENDED 0x80000
53#define NDEBUG_C400_PREAD 0x100000
54#define NDEBUG_C400_PWRITE 0x200000
55#define NDEBUG_LISTS 0x400000
56#define NDEBUG_ABORT 0x800000
57#define NDEBUG_TAGS 0x1000000
58#define NDEBUG_MERGING 0x2000000
59
60#define NDEBUG_ANY 0xFFFFFFFFUL
61
62/*
63 * The contents of the OUTPUT DATA register are asserted on the bus when
64 * either arbitration is occurring or the phase-indicating signals (
65 * IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA
66 * bit in the INITIATOR COMMAND register is set.
67 */
68
69#define OUTPUT_DATA_REG 0 /* wo DATA lines on SCSI bus */
70#define CURRENT_SCSI_DATA_REG 0 /* ro same */
71
72#define INITIATOR_COMMAND_REG 1 /* rw */
73#define ICR_ASSERT_RST 0x80 /* rw Set to assert RST */
74#define ICR_ARBITRATION_PROGRESS 0x40 /* ro Indicates arbitration complete */
75#define ICR_TRI_STATE 0x40 /* wo Set to tri-state drivers */
76#define ICR_ARBITRATION_LOST 0x20 /* ro Indicates arbitration lost */
77#define ICR_DIFF_ENABLE 0x20 /* wo Set to enable diff. drivers */
78#define ICR_ASSERT_ACK 0x10 /* rw ini Set to assert ACK */
79#define ICR_ASSERT_BSY 0x08 /* rw Set to assert BSY */
80#define ICR_ASSERT_SEL 0x04 /* rw Set to assert SEL */
81#define ICR_ASSERT_ATN 0x02 /* rw Set to assert ATN */
82#define ICR_ASSERT_DATA 0x01 /* rw SCSI_DATA_REG is asserted */
83
84#ifdef DIFFERENTIAL
85#define ICR_BASE ICR_DIFF_ENABLE
86#else
87#define ICR_BASE 0
88#endif
89
90#define MODE_REG 2
91/*
92 * Note : BLOCK_DMA code will keep DRQ asserted for the duration of the
93 * transfer, causing the chip to hog the bus. You probably don't want
94 * this.
95 */
96#define MR_BLOCK_DMA_MODE 0x80 /* rw block mode DMA */
97#define MR_TARGET 0x40 /* rw target mode */
98#define MR_ENABLE_PAR_CHECK 0x20 /* rw enable parity checking */
99#define MR_ENABLE_PAR_INTR 0x10 /* rw enable bad parity interrupt */
100#define MR_ENABLE_EOP_INTR 0x08 /* rw enable eop interrupt */
101#define MR_MONITOR_BSY 0x04 /* rw enable int on unexpected bsy fail */
102#define MR_DMA_MODE 0x02 /* rw DMA / pseudo DMA mode */
103#define MR_ARBITRATE 0x01 /* rw start arbitration */
104
105#ifdef PARITY
106#define MR_BASE MR_ENABLE_PAR_CHECK
107#else
108#define MR_BASE 0
109#endif
110
111#define TARGET_COMMAND_REG 3
112#define TCR_LAST_BYTE_SENT 0x80 /* ro DMA done */
113#define TCR_ASSERT_REQ 0x08 /* tgt rw assert REQ */
114#define TCR_ASSERT_MSG 0x04 /* tgt rw assert MSG */
115#define TCR_ASSERT_CD 0x02 /* tgt rw assert CD */
116#define TCR_ASSERT_IO 0x01 /* tgt rw assert IO */
117
118#define STATUS_REG 4 /* ro */
119/*
120 * Note : a set bit indicates an active signal, driven by us or another
121 * device.
122 */
123#define SR_RST 0x80
124#define SR_BSY 0x40
125#define SR_REQ 0x20
126#define SR_MSG 0x10
127#define SR_CD 0x08
128#define SR_IO 0x04
129#define SR_SEL 0x02
130#define SR_DBP 0x01
131
132/*
133 * Setting a bit in this register will cause an interrupt to be generated when
134 * BSY is false and SEL true and this bit is asserted on the bus.
135 */
136#define SELECT_ENABLE_REG 4 /* wo */
137
138#define BUS_AND_STATUS_REG 5 /* ro */
139#define BASR_END_DMA_TRANSFER 0x80 /* ro set on end of transfer */
140#define BASR_DRQ 0x40 /* ro mirror of DRQ pin */
141#define BASR_PARITY_ERROR 0x20 /* ro parity error detected */
142#define BASR_IRQ 0x10 /* ro mirror of IRQ pin */
143#define BASR_PHASE_MATCH 0x08 /* ro Set when MSG CD IO match TCR */
144#define BASR_BUSY_ERROR 0x04 /* ro Unexpected change to inactive state */
145#define BASR_ATN 0x02 /* ro BUS status */
146#define BASR_ACK 0x01 /* ro BUS status */
147
148/* Write any value to this register to start a DMA send */
149#define START_DMA_SEND_REG 5 /* wo */
150
151/*
152 * Used in DMA transfer mode, data is latched from the SCSI bus on
153 * the falling edge of REQ (ini) or ACK (tgt)
154 */
155#define INPUT_DATA_REG 6 /* ro */
156
157/* Write any value to this register to start a DMA receive */
158#define START_DMA_TARGET_RECEIVE_REG 6 /* wo */
159
160/* Read this register to clear interrupt conditions */
161#define RESET_PARITY_INTERRUPT_REG 7 /* ro */
162
163/* Write any value to this register to start an ini mode DMA receive */
164#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
165
166/* NCR 53C400(A) Control Status Register bits: */
167#define CSR_RESET 0x80 /* wo Resets 53c400 */
168#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
169#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
170#define CSR_SCSI_BUFF_INTR 0x20 /* rw Enable int on transfer ready */
171#define CSR_53C80_INTR 0x10 /* rw Enable 53c80 interrupts */
172#define CSR_SHARED_INTR 0x08 /* rw Interrupt sharing */
173#define CSR_HOST_BUF_NOT_RDY 0x04 /* ro Is Host buffer ready */
174#define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */
175#define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */
176
177#if 0
178#define CSR_BASE CSR_SCSI_BUFF_INTR | CSR_53C80_INTR
179#else
180#define CSR_BASE CSR_53C80_INTR
181#endif
182
183/* Note : PHASE_* macros are based on the values of the STATUS register */
184#define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
185
186#define PHASE_DATAOUT 0
187#define PHASE_DATAIN SR_IO
188#define PHASE_CMDOUT SR_CD
189#define PHASE_STATIN (SR_CD | SR_IO)
190#define PHASE_MSGOUT (SR_MSG | SR_CD)
191#define PHASE_MSGIN (SR_MSG | SR_CD | SR_IO)
192#define PHASE_UNKNOWN 0xff
193
194/*
195 * Convert status register phase to something we can use to set phase in
196 * the target register so we can get phase mismatch interrupts on DMA
197 * transfers.
198 */
199
200#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
201
202#ifndef NO_IRQ
203#define NO_IRQ 0
204#endif
205
206#define FLAG_DMA_FIXUP 1 /* Use DMA errata workarounds */
207#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
208#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
209#define FLAG_TOSHIBA_DELAY 128 /* Allow for borken CD-ROMs */
210
211struct NCR5380_hostdata {
212 NCR5380_implementation_fields; /* Board-specific data */
213 u8 __iomem *io; /* Remapped 5380 address */
214 u8 __iomem *pdma_io; /* Remapped PDMA address */
215 unsigned long poll_loops; /* Register polling limit */
216 spinlock_t lock; /* Protects this struct */
217 struct scsi_cmnd *connected; /* Currently connected cmnd */
218 struct list_head disconnected; /* Waiting for reconnect */
219 struct Scsi_Host *host; /* SCSI host backpointer */
220 struct workqueue_struct *work_q; /* SCSI host work queue */
221 struct work_struct main_task; /* Work item for main loop */
222 int flags; /* Board-specific quirks */
223 int dma_len; /* Requested length of DMA */
224 int read_overruns; /* Transfer size reduction for DMA erratum */
225 unsigned long io_port; /* Device IO port */
226 unsigned long base; /* Device base address */
227 struct list_head unissued; /* Waiting to be issued */
228 struct scsi_cmnd *selecting; /* Cmnd to be connected */
229 struct list_head autosense; /* Priority cmnd queue */
230 struct scsi_cmnd *sensing; /* Cmnd needing autosense */
231 struct scsi_eh_save ses; /* Cmnd state saved for EH */
232 unsigned char busy[8]; /* Index = target, bit = lun */
233 unsigned char id_mask; /* 1 << Host ID */
234 unsigned char id_higher_mask; /* All bits above id_mask */
235 unsigned char last_message; /* Last Message Out */
236 unsigned long region_size; /* Size of address/port range */
237 char info[256];
238};
239
240#ifdef __KERNEL__
241
242struct NCR5380_cmd {
243 struct list_head list;
244};
245
246#define NCR5380_CMD_SIZE (sizeof(struct NCR5380_cmd))
247
248#define NCR5380_PIO_CHUNK_SIZE 256
249
250/* Time limit (ms) to poll registers when IRQs are disabled, e.g. during PDMA */
251#define NCR5380_REG_POLL_TIME 15
252
253static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr)
254{
255 return ((struct scsi_cmnd *)ncmd_ptr) - 1;
256}
257
258#ifndef NDEBUG
259#define NDEBUG (0)
260#endif
261
262#define dprintk(flg, fmt, ...) \
263 do { if ((NDEBUG) & (flg)) \
264 printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0)
265
266#define dsprintk(flg, host, fmt, ...) \
267 do { if ((NDEBUG) & (flg)) \
268 shost_printk(KERN_DEBUG, host, fmt, ## __VA_ARGS__); \
269 } while (0)
270
271#if NDEBUG
272#define NCR5380_dprint(flg, arg) \
273 do { if ((NDEBUG) & (flg)) NCR5380_print(arg); } while (0)
274#define NCR5380_dprint_phase(flg, arg) \
275 do { if ((NDEBUG) & (flg)) NCR5380_print_phase(arg); } while (0)
276static void NCR5380_print_phase(struct Scsi_Host *instance);
277static void NCR5380_print(struct Scsi_Host *instance);
278#else
279#define NCR5380_dprint(flg, arg) do {} while (0)
280#define NCR5380_dprint_phase(flg, arg) do {} while (0)
281#endif
282
283static int NCR5380_init(struct Scsi_Host *instance, int flags);
284static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
285static void NCR5380_exit(struct Scsi_Host *instance);
286static void NCR5380_information_transfer(struct Scsi_Host *instance);
287static irqreturn_t NCR5380_intr(int irq, void *dev_id);
288static void NCR5380_main(struct work_struct *work);
289static const char *NCR5380_info(struct Scsi_Host *instance);
290static void NCR5380_reselect(struct Scsi_Host *instance);
291static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
292static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
293static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
294static int NCR5380_poll_politely2(struct NCR5380_hostdata *,
295 unsigned int, u8, u8,
296 unsigned int, u8, u8, unsigned long);
297
298static inline int NCR5380_poll_politely(struct NCR5380_hostdata *hostdata,
299 unsigned int reg, u8 bit, u8 val,
300 unsigned long wait)
301{
302 if ((NCR5380_read(reg) & bit) == val)
303 return 0;
304
305 return NCR5380_poll_politely2(hostdata, reg, bit, val,
306 reg, bit, val, wait);
307}
308
309static int NCR5380_dma_xfer_len(struct NCR5380_hostdata *,
310 struct scsi_cmnd *);
311static int NCR5380_dma_send_setup(struct NCR5380_hostdata *,
312 unsigned char *, int);
313static int NCR5380_dma_recv_setup(struct NCR5380_hostdata *,
314 unsigned char *, int);
315static int NCR5380_dma_residual(struct NCR5380_hostdata *);
316
317static inline int NCR5380_dma_xfer_none(struct NCR5380_hostdata *hostdata,
318 struct scsi_cmnd *cmd)
319{
320 return 0;
321}
322
323static inline int NCR5380_dma_setup_none(struct NCR5380_hostdata *hostdata,
324 unsigned char *data, int count)
325{
326 return 0;
327}
328
329static inline int NCR5380_dma_residual_none(struct NCR5380_hostdata *hostdata)
330{
331 return 0;
332}
333
334#endif /* __KERNEL__ */
335#endif /* NCR5380_H */
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * NCR 5380 defines
4 *
5 * Copyright 1993, Drew Eckhardt
6 * Visionary Computing
7 * (Unix consulting and custom programming)
8 * drew@colorado.edu
9 * +1 (303) 666-5836
10 *
11 * For more information, please consult
12 *
13 * NCR 5380 Family
14 * SCSI Protocol Controller
15 * Databook
16 * NCR Microelectronics
17 * 1635 Aeroplaza Drive
18 * Colorado Springs, CO 80916
19 * 1+ (719) 578-3400
20 * 1+ (800) 334-5454
21 */
22
23#ifndef NCR5380_H
24#define NCR5380_H
25
26#include <linux/delay.h>
27#include <linux/interrupt.h>
28#include <linux/list.h>
29#include <linux/workqueue.h>
30#include <scsi/scsi_dbg.h>
31#include <scsi/scsi_eh.h>
32#include <scsi/scsi_transport_spi.h>
33
34#define NDEBUG_ARBITRATION 0x1
35#define NDEBUG_AUTOSENSE 0x2
36#define NDEBUG_DMA 0x4
37#define NDEBUG_HANDSHAKE 0x8
38#define NDEBUG_INFORMATION 0x10
39#define NDEBUG_INIT 0x20
40#define NDEBUG_INTR 0x40
41#define NDEBUG_LINKED 0x80
42#define NDEBUG_MAIN 0x100
43#define NDEBUG_NO_DATAOUT 0x200
44#define NDEBUG_NO_WRITE 0x400
45#define NDEBUG_PIO 0x800
46#define NDEBUG_PSEUDO_DMA 0x1000
47#define NDEBUG_QUEUES 0x2000
48#define NDEBUG_RESELECTION 0x4000
49#define NDEBUG_SELECTION 0x8000
50#define NDEBUG_USLEEP 0x10000
51#define NDEBUG_LAST_BYTE_SENT 0x20000
52#define NDEBUG_RESTART_SELECT 0x40000
53#define NDEBUG_EXTENDED 0x80000
54#define NDEBUG_C400_PREAD 0x100000
55#define NDEBUG_C400_PWRITE 0x200000
56#define NDEBUG_LISTS 0x400000
57#define NDEBUG_ABORT 0x800000
58#define NDEBUG_TAGS 0x1000000
59#define NDEBUG_MERGING 0x2000000
60
61#define NDEBUG_ANY 0xFFFFFFFFUL
62
63/*
64 * The contents of the OUTPUT DATA register are asserted on the bus when
65 * either arbitration is occurring or the phase-indicating signals (
66 * IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA
67 * bit in the INITIATOR COMMAND register is set.
68 */
69
70#define OUTPUT_DATA_REG 0 /* wo DATA lines on SCSI bus */
71#define CURRENT_SCSI_DATA_REG 0 /* ro same */
72
73#define INITIATOR_COMMAND_REG 1 /* rw */
74#define ICR_ASSERT_RST 0x80 /* rw Set to assert RST */
75#define ICR_ARBITRATION_PROGRESS 0x40 /* ro Indicates arbitration complete */
76#define ICR_TRI_STATE 0x40 /* wo Set to tri-state drivers */
77#define ICR_ARBITRATION_LOST 0x20 /* ro Indicates arbitration lost */
78#define ICR_DIFF_ENABLE 0x20 /* wo Set to enable diff. drivers */
79#define ICR_ASSERT_ACK 0x10 /* rw ini Set to assert ACK */
80#define ICR_ASSERT_BSY 0x08 /* rw Set to assert BSY */
81#define ICR_ASSERT_SEL 0x04 /* rw Set to assert SEL */
82#define ICR_ASSERT_ATN 0x02 /* rw Set to assert ATN */
83#define ICR_ASSERT_DATA 0x01 /* rw SCSI_DATA_REG is asserted */
84
85#define ICR_BASE 0
86
87#define MODE_REG 2
88/*
89 * Note : BLOCK_DMA code will keep DRQ asserted for the duration of the
90 * transfer, causing the chip to hog the bus. You probably don't want
91 * this.
92 */
93#define MR_BLOCK_DMA_MODE 0x80 /* rw block mode DMA */
94#define MR_TARGET 0x40 /* rw target mode */
95#define MR_ENABLE_PAR_CHECK 0x20 /* rw enable parity checking */
96#define MR_ENABLE_PAR_INTR 0x10 /* rw enable bad parity interrupt */
97#define MR_ENABLE_EOP_INTR 0x08 /* rw enable eop interrupt */
98#define MR_MONITOR_BSY 0x04 /* rw enable int on unexpected bsy fail */
99#define MR_DMA_MODE 0x02 /* rw DMA / pseudo DMA mode */
100#define MR_ARBITRATE 0x01 /* rw start arbitration */
101
102#define MR_BASE 0
103
104#define TARGET_COMMAND_REG 3
105#define TCR_LAST_BYTE_SENT 0x80 /* ro DMA done */
106#define TCR_ASSERT_REQ 0x08 /* tgt rw assert REQ */
107#define TCR_ASSERT_MSG 0x04 /* tgt rw assert MSG */
108#define TCR_ASSERT_CD 0x02 /* tgt rw assert CD */
109#define TCR_ASSERT_IO 0x01 /* tgt rw assert IO */
110
111#define STATUS_REG 4 /* ro */
112/*
113 * Note : a set bit indicates an active signal, driven by us or another
114 * device.
115 */
116#define SR_RST 0x80
117#define SR_BSY 0x40
118#define SR_REQ 0x20
119#define SR_MSG 0x10
120#define SR_CD 0x08
121#define SR_IO 0x04
122#define SR_SEL 0x02
123#define SR_DBP 0x01
124
125/*
126 * Setting a bit in this register will cause an interrupt to be generated when
127 * BSY is false and SEL true and this bit is asserted on the bus.
128 */
129#define SELECT_ENABLE_REG 4 /* wo */
130
131#define BUS_AND_STATUS_REG 5 /* ro */
132#define BASR_END_DMA_TRANSFER 0x80 /* ro set on end of transfer */
133#define BASR_DRQ 0x40 /* ro mirror of DRQ pin */
134#define BASR_PARITY_ERROR 0x20 /* ro parity error detected */
135#define BASR_IRQ 0x10 /* ro mirror of IRQ pin */
136#define BASR_PHASE_MATCH 0x08 /* ro Set when MSG CD IO match TCR */
137#define BASR_BUSY_ERROR 0x04 /* ro Unexpected change to inactive state */
138#define BASR_ATN 0x02 /* ro BUS status */
139#define BASR_ACK 0x01 /* ro BUS status */
140
141/* Write any value to this register to start a DMA send */
142#define START_DMA_SEND_REG 5 /* wo */
143
144/*
145 * Used in DMA transfer mode, data is latched from the SCSI bus on
146 * the falling edge of REQ (ini) or ACK (tgt)
147 */
148#define INPUT_DATA_REG 6 /* ro */
149
150/* Write any value to this register to start a DMA receive */
151#define START_DMA_TARGET_RECEIVE_REG 6 /* wo */
152
153/* Read this register to clear interrupt conditions */
154#define RESET_PARITY_INTERRUPT_REG 7 /* ro */
155
156/* Write any value to this register to start an ini mode DMA receive */
157#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
158
159/* NCR 53C400(A) Control Status Register bits: */
160#define CSR_RESET 0x80 /* wo Resets 53c400 */
161#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
162#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
163#define CSR_SCSI_BUFF_INTR 0x20 /* rw Enable int on transfer ready */
164#define CSR_53C80_INTR 0x10 /* rw Enable 53c80 interrupts */
165#define CSR_SHARED_INTR 0x08 /* rw Interrupt sharing */
166#define CSR_HOST_BUF_NOT_RDY 0x04 /* ro Is Host buffer ready */
167#define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */
168#define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */
169
170#define CSR_BASE CSR_53C80_INTR
171
172/* Note : PHASE_* macros are based on the values of the STATUS register */
173#define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
174
175#define PHASE_DATAOUT 0
176#define PHASE_DATAIN SR_IO
177#define PHASE_CMDOUT SR_CD
178#define PHASE_STATIN (SR_CD | SR_IO)
179#define PHASE_MSGOUT (SR_MSG | SR_CD)
180#define PHASE_MSGIN (SR_MSG | SR_CD | SR_IO)
181#define PHASE_UNKNOWN 0xff
182
183/*
184 * Convert status register phase to something we can use to set phase in
185 * the target register so we can get phase mismatch interrupts on DMA
186 * transfers.
187 */
188
189#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
190
191#ifndef NO_IRQ
192#define NO_IRQ 0
193#endif
194
195#define FLAG_DMA_FIXUP 1 /* Use DMA errata workarounds */
196#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
197#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
198#define FLAG_TOSHIBA_DELAY 128 /* Allow for borken CD-ROMs */
199
200struct NCR5380_hostdata {
201 NCR5380_implementation_fields; /* Board-specific data */
202 u8 __iomem *io; /* Remapped 5380 address */
203 u8 __iomem *pdma_io; /* Remapped PDMA address */
204 unsigned long poll_loops; /* Register polling limit */
205 spinlock_t lock; /* Protects this struct */
206 struct scsi_cmnd *connected; /* Currently connected cmnd */
207 struct list_head disconnected; /* Waiting for reconnect */
208 struct Scsi_Host *host; /* SCSI host backpointer */
209 struct workqueue_struct *work_q; /* SCSI host work queue */
210 struct work_struct main_task; /* Work item for main loop */
211 int flags; /* Board-specific quirks */
212 int dma_len; /* Requested length of DMA */
213 int read_overruns; /* Transfer size reduction for DMA erratum */
214 unsigned long io_port; /* Device IO port */
215 unsigned long base; /* Device base address */
216 struct list_head unissued; /* Waiting to be issued */
217 struct scsi_cmnd *selecting; /* Cmnd to be connected */
218 struct list_head autosense; /* Priority cmnd queue */
219 struct scsi_cmnd *sensing; /* Cmnd needing autosense */
220 struct scsi_eh_save ses; /* Cmnd state saved for EH */
221 unsigned char busy[8]; /* Index = target, bit = lun */
222 unsigned char id_mask; /* 1 << Host ID */
223 unsigned char id_higher_mask; /* All bits above id_mask */
224 unsigned char last_message; /* Last Message Out */
225 unsigned long region_size; /* Size of address/port range */
226 char info[168]; /* Host banner message */
227};
228
229struct NCR5380_cmd {
230 char *ptr;
231 int this_residual;
232 struct scatterlist *buffer;
233 int status;
234 int message;
235 int phase;
236 struct list_head list;
237};
238
239#define NCR5380_PIO_CHUNK_SIZE 256
240
241/* Time limit (ms) to poll registers when IRQs are disabled, e.g. during PDMA */
242#define NCR5380_REG_POLL_TIME 10
243
244static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr)
245{
246 return ((struct scsi_cmnd *)ncmd_ptr) - 1;
247}
248
249static inline struct NCR5380_cmd *NCR5380_to_ncmd(struct scsi_cmnd *cmd)
250{
251 return scsi_cmd_priv(cmd);
252}
253
254#ifndef NDEBUG
255#define NDEBUG (0)
256#endif
257
258#define dprintk(flg, fmt, ...) \
259 do { if ((NDEBUG) & (flg)) \
260 printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0)
261
262#define dsprintk(flg, host, fmt, ...) \
263 do { if ((NDEBUG) & (flg)) \
264 shost_printk(KERN_DEBUG, host, fmt, ## __VA_ARGS__); \
265 } while (0)
266
267#if NDEBUG
268#define NCR5380_dprint(flg, arg) \
269 do { if ((NDEBUG) & (flg)) NCR5380_print(arg); } while (0)
270#define NCR5380_dprint_phase(flg, arg) \
271 do { if ((NDEBUG) & (flg)) NCR5380_print_phase(arg); } while (0)
272static void NCR5380_print_phase(struct Scsi_Host *instance);
273static void NCR5380_print(struct Scsi_Host *instance);
274#else
275#define NCR5380_dprint(flg, arg) do {} while (0)
276#define NCR5380_dprint_phase(flg, arg) do {} while (0)
277#endif
278
279static int NCR5380_init(struct Scsi_Host *instance, int flags);
280static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
281static void NCR5380_exit(struct Scsi_Host *instance);
282static void NCR5380_information_transfer(struct Scsi_Host *instance);
283static irqreturn_t NCR5380_intr(int irq, void *dev_id);
284static void NCR5380_main(struct work_struct *work);
285static const char *NCR5380_info(struct Scsi_Host *instance);
286static void NCR5380_reselect(struct Scsi_Host *instance);
287static bool NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
288static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
289static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data,
290 unsigned int can_sleep);
291static int NCR5380_poll_politely2(struct NCR5380_hostdata *,
292 unsigned int, u8, u8,
293 unsigned int, u8, u8, unsigned long);
294
295static inline int NCR5380_poll_politely(struct NCR5380_hostdata *hostdata,
296 unsigned int reg, u8 bit, u8 val,
297 unsigned long wait)
298{
299 if ((NCR5380_read(reg) & bit) == val)
300 return 0;
301
302 return NCR5380_poll_politely2(hostdata, reg, bit, val,
303 reg, bit, val, wait);
304}
305
306static int NCR5380_dma_xfer_len(struct NCR5380_hostdata *,
307 struct scsi_cmnd *);
308static int NCR5380_dma_send_setup(struct NCR5380_hostdata *,
309 unsigned char *, int);
310static int NCR5380_dma_recv_setup(struct NCR5380_hostdata *,
311 unsigned char *, int);
312static int NCR5380_dma_residual(struct NCR5380_hostdata *);
313
314static inline int NCR5380_dma_xfer_none(struct NCR5380_hostdata *hostdata,
315 struct scsi_cmnd *cmd)
316{
317 return 0;
318}
319
320static inline int NCR5380_dma_setup_none(struct NCR5380_hostdata *hostdata,
321 unsigned char *data, int count)
322{
323 return 0;
324}
325
326static inline int NCR5380_dma_residual_none(struct NCR5380_hostdata *hostdata)
327{
328 return 0;
329}
330
331#endif /* NCR5380_H */