Linux Audio

Check our new training course

Loading...
v4.10.11
  1/*
  2 *  Miscellaneous functions for IDT EB434 board
  3 *
  4 *  Copyright 2004 IDT Inc. (rischelp@idt.com)
  5 *  Copyright 2006 Phil Sutter <n0-1@freewrt.org>
  6 *  Copyright 2007 Florian Fainelli <florian@openwrt.org>
  7 *
  8 *  This program is free software; you can redistribute  it and/or modify it
  9 *  under  the terms of  the GNU General  Public License as published by the
 10 *  Free Software Foundation;  either version 2 of the  License, or (at your
 11 *  option) any later version.
 12 *
 13 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 14 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 15 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 16 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 17 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 18 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 19 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 20 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 21 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 22 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 23 *
 24 *  You should have received a copy of the  GNU General Public License along
 25 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 26 *  675 Mass Ave, Cambridge, MA 02139, USA.
 27 */
 28
 29#include <linux/kernel.h>
 30#include <linux/init.h>
 31#include <linux/types.h>
 32#include <linux/export.h>
 33#include <linux/spinlock.h>
 34#include <linux/platform_device.h>
 35#include <linux/gpio/driver.h>
 36
 37#include <asm/mach-rc32434/rb.h>
 38#include <asm/mach-rc32434/gpio.h>
 39
 
 
 
 
 
 
 
 
 
 
 40struct rb532_gpio_chip {
 41	struct gpio_chip chip;
 42	void __iomem	 *regbase;
 43};
 44
 45static struct resource rb532_gpio_reg0_res[] = {
 46	{
 47		.name	= "gpio_reg0",
 48		.start	= REGBASE + GPIOBASE,
 49		.end	= REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
 50		.flags	= IORESOURCE_MEM,
 51	}
 52};
 53
 54/* rb532_set_bit - sanely set a bit
 55 *
 56 * bitval: new value for the bit
 57 * offset: bit index in the 4 byte address range
 58 * ioaddr: 4 byte aligned address being altered
 59 */
 60static inline void rb532_set_bit(unsigned bitval,
 61		unsigned offset, void __iomem *ioaddr)
 62{
 63	unsigned long flags;
 64	u32 val;
 65
 66	local_irq_save(flags);
 67
 68	val = readl(ioaddr);
 69	val &= ~(!bitval << offset);   /* unset bit if bitval == 0 */
 70	val |= (!!bitval << offset);   /* set bit if bitval == 1 */
 71	writel(val, ioaddr);
 72
 73	local_irq_restore(flags);
 74}
 75
 76/* rb532_get_bit - read a bit
 77 *
 78 * returns the boolean state of the bit, which may be > 1
 79 */
 80static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr)
 81{
 82	return readl(ioaddr) & (1 << offset);
 83}
 84
 85/*
 86 * Return GPIO level */
 87static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
 88{
 89	struct rb532_gpio_chip	*gpch;
 90
 91	gpch = gpiochip_get_data(chip);
 92	return !!rb532_get_bit(offset, gpch->regbase + GPIOD);
 93}
 94
 95/*
 96 * Set output GPIO level
 97 */
 98static void rb532_gpio_set(struct gpio_chip *chip,
 99				unsigned offset, int value)
100{
101	struct rb532_gpio_chip	*gpch;
102
103	gpch = gpiochip_get_data(chip);
104	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
105}
106
107/*
108 * Set GPIO direction to input
109 */
110static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
111{
112	struct rb532_gpio_chip	*gpch;
113
114	gpch = gpiochip_get_data(chip);
115
116	/* disable alternate function in case it's set */
117	rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
118
119	rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
120	return 0;
121}
122
123/*
124 * Set GPIO direction to output
125 */
126static int rb532_gpio_direction_output(struct gpio_chip *chip,
127					unsigned offset, int value)
128{
129	struct rb532_gpio_chip	*gpch;
130
131	gpch = gpiochip_get_data(chip);
132
133	/* disable alternate function in case it's set */
134	rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
135
136	/* set the initial output value */
137	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
138
139	rb532_set_bit(1, offset, gpch->regbase + GPIOCFG);
140	return 0;
141}
142
143static int rb532_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
144{
145	return 8 + 4 * 32 + gpio;
146}
147
148static struct rb532_gpio_chip rb532_gpio_chip[] = {
149	[0] = {
150		.chip = {
151			.label			= "gpio0",
152			.direction_input	= rb532_gpio_direction_input,
153			.direction_output	= rb532_gpio_direction_output,
154			.get			= rb532_gpio_get,
155			.set			= rb532_gpio_set,
156			.to_irq			= rb532_gpio_to_irq,
157			.base			= 0,
158			.ngpio			= 32,
159		},
160	},
161};
162
163/*
164 * Set GPIO interrupt level
165 */
166void rb532_gpio_set_ilevel(int bit, unsigned gpio)
167{
168	rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOILEVEL);
169}
170EXPORT_SYMBOL(rb532_gpio_set_ilevel);
171
172/*
173 * Set GPIO interrupt status
174 */
175void rb532_gpio_set_istat(int bit, unsigned gpio)
176{
177	rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOISTAT);
178}
179EXPORT_SYMBOL(rb532_gpio_set_istat);
180
181/*
182 * Configure GPIO alternate function
183 */
184void rb532_gpio_set_func(unsigned gpio)
185{
186       rb532_set_bit(1, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
187}
188EXPORT_SYMBOL(rb532_gpio_set_func);
189
190int __init rb532_gpio_init(void)
191{
192	struct resource *r;
193
194	r = rb532_gpio_reg0_res;
195	rb532_gpio_chip->regbase = ioremap_nocache(r->start, resource_size(r));
196
197	if (!rb532_gpio_chip->regbase) {
198		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
199		return -ENXIO;
200	}
201
202	/* Register our GPIO chip */
203	gpiochip_add_data(&rb532_gpio_chip->chip, rb532_gpio_chip);
204
205	return 0;
206}
207arch_initcall(rb532_gpio_init);
v6.8
  1/*
  2 *  Miscellaneous functions for IDT EB434 board
  3 *
  4 *  Copyright 2004 IDT Inc. (rischelp@idt.com)
  5 *  Copyright 2006 Phil Sutter <n0-1@freewrt.org>
  6 *  Copyright 2007 Florian Fainelli <florian@openwrt.org>
  7 *
  8 *  This program is free software; you can redistribute  it and/or modify it
  9 *  under  the terms of  the GNU General  Public License as published by the
 10 *  Free Software Foundation;  either version 2 of the  License, or (at your
 11 *  option) any later version.
 12 *
 13 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 14 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 15 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 16 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 17 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 18 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 19 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 20 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 21 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 22 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 23 *
 24 *  You should have received a copy of the  GNU General Public License along
 25 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 26 *  675 Mass Ave, Cambridge, MA 02139, USA.
 27 */
 28
 29#include <linux/kernel.h>
 30#include <linux/init.h>
 31#include <linux/types.h>
 32#include <linux/export.h>
 33#include <linux/spinlock.h>
 34#include <linux/platform_device.h>
 35#include <linux/gpio/driver.h>
 36
 37#include <asm/mach-rc32434/rb.h>
 38#include <asm/mach-rc32434/gpio.h>
 39
 40#define GPIOBASE	0x050000
 41/* Offsets relative to GPIOBASE */
 42#define GPIOFUNC	0x00
 43#define GPIOCFG		0x04
 44#define GPIOD		0x08
 45#define GPIOILEVEL	0x0C
 46#define GPIOISTAT	0x10
 47#define GPIONMIEN	0x14
 48#define IMASK6		0x38
 49
 50struct rb532_gpio_chip {
 51	struct gpio_chip chip;
 52	void __iomem	 *regbase;
 53};
 54
 55static struct resource rb532_gpio_reg0_res[] = {
 56	{
 57		.name	= "gpio_reg0",
 58		.start	= REGBASE + GPIOBASE,
 59		.end	= REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
 60		.flags	= IORESOURCE_MEM,
 61	}
 62};
 63
 64/* rb532_set_bit - sanely set a bit
 65 *
 66 * bitval: new value for the bit
 67 * offset: bit index in the 4 byte address range
 68 * ioaddr: 4 byte aligned address being altered
 69 */
 70static inline void rb532_set_bit(unsigned bitval,
 71		unsigned offset, void __iomem *ioaddr)
 72{
 73	unsigned long flags;
 74	u32 val;
 75
 76	local_irq_save(flags);
 77
 78	val = readl(ioaddr);
 79	val &= ~(!bitval << offset);   /* unset bit if bitval == 0 */
 80	val |= (!!bitval << offset);   /* set bit if bitval == 1 */
 81	writel(val, ioaddr);
 82
 83	local_irq_restore(flags);
 84}
 85
 86/* rb532_get_bit - read a bit
 87 *
 88 * returns the boolean state of the bit, which may be > 1
 89 */
 90static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr)
 91{
 92	return readl(ioaddr) & (1 << offset);
 93}
 94
 95/*
 96 * Return GPIO level */
 97static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
 98{
 99	struct rb532_gpio_chip	*gpch;
100
101	gpch = gpiochip_get_data(chip);
102	return !!rb532_get_bit(offset, gpch->regbase + GPIOD);
103}
104
105/*
106 * Set output GPIO level
107 */
108static void rb532_gpio_set(struct gpio_chip *chip,
109				unsigned offset, int value)
110{
111	struct rb532_gpio_chip	*gpch;
112
113	gpch = gpiochip_get_data(chip);
114	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
115}
116
117/*
118 * Set GPIO direction to input
119 */
120static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
121{
122	struct rb532_gpio_chip	*gpch;
123
124	gpch = gpiochip_get_data(chip);
125
126	/* disable alternate function in case it's set */
127	rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
128
129	rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
130	return 0;
131}
132
133/*
134 * Set GPIO direction to output
135 */
136static int rb532_gpio_direction_output(struct gpio_chip *chip,
137					unsigned offset, int value)
138{
139	struct rb532_gpio_chip	*gpch;
140
141	gpch = gpiochip_get_data(chip);
142
143	/* disable alternate function in case it's set */
144	rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
145
146	/* set the initial output value */
147	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
148
149	rb532_set_bit(1, offset, gpch->regbase + GPIOCFG);
150	return 0;
151}
152
153static int rb532_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
154{
155	return 8 + 4 * 32 + gpio;
156}
157
158static struct rb532_gpio_chip rb532_gpio_chip[] = {
159	[0] = {
160		.chip = {
161			.label			= "gpio0",
162			.direction_input	= rb532_gpio_direction_input,
163			.direction_output	= rb532_gpio_direction_output,
164			.get			= rb532_gpio_get,
165			.set			= rb532_gpio_set,
166			.to_irq			= rb532_gpio_to_irq,
167			.base			= 0,
168			.ngpio			= 32,
169		},
170	},
171};
172
173/*
174 * Set GPIO interrupt level
175 */
176void rb532_gpio_set_ilevel(int bit, unsigned gpio)
177{
178	rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOILEVEL);
179}
180EXPORT_SYMBOL(rb532_gpio_set_ilevel);
181
182/*
183 * Set GPIO interrupt status
184 */
185void rb532_gpio_set_istat(int bit, unsigned gpio)
186{
187	rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOISTAT);
188}
189EXPORT_SYMBOL(rb532_gpio_set_istat);
190
191/*
192 * Configure GPIO alternate function
193 */
194void rb532_gpio_set_func(unsigned gpio)
195{
196       rb532_set_bit(1, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
197}
198EXPORT_SYMBOL(rb532_gpio_set_func);
199
200int __init rb532_gpio_init(void)
201{
202	struct resource *r;
203
204	r = rb532_gpio_reg0_res;
205	rb532_gpio_chip->regbase = ioremap(r->start, resource_size(r));
206
207	if (!rb532_gpio_chip->regbase) {
208		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
209		return -ENXIO;
210	}
211
212	/* Register our GPIO chip */
213	gpiochip_add_data(&rb532_gpio_chip->chip, rb532_gpio_chip);
214
215	return 0;
216}
217arch_initcall(rb532_gpio_init);