Loading...
1/*
2 * Copyright (C) 2002 ARM Limited, All Rights Reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 *
13 * You should have received a copy of the GNU General Public License
14 * along with this program. If not, see <http://www.gnu.org/licenses/>.
15 */
16
17#include <linux/interrupt.h>
18#include <linux/io.h>
19#include <linux/irq.h>
20#include <linux/irqchip/arm-gic.h>
21
22#include "irq-gic-common.h"
23
24static const struct gic_kvm_info *gic_kvm_info;
25
26const struct gic_kvm_info *gic_get_kvm_info(void)
27{
28 return gic_kvm_info;
29}
30
31void gic_set_kvm_info(const struct gic_kvm_info *info)
32{
33 BUG_ON(gic_kvm_info != NULL);
34 gic_kvm_info = info;
35}
36
37void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
38 void *data)
39{
40 for (; quirks->desc; quirks++) {
41 if (quirks->iidr != (quirks->mask & iidr))
42 continue;
43 quirks->init(data);
44 pr_info("GIC: enabling workaround for %s\n", quirks->desc);
45 }
46}
47
48int gic_configure_irq(unsigned int irq, unsigned int type,
49 void __iomem *base, void (*sync_access)(void))
50{
51 u32 confmask = 0x2 << ((irq % 16) * 2);
52 u32 confoff = (irq / 16) * 4;
53 u32 val, oldval;
54 int ret = 0;
55
56 /*
57 * Read current configuration register, and insert the config
58 * for "irq", depending on "type".
59 */
60 val = oldval = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
61 if (type & IRQ_TYPE_LEVEL_MASK)
62 val &= ~confmask;
63 else if (type & IRQ_TYPE_EDGE_BOTH)
64 val |= confmask;
65
66 /* If the current configuration is the same, then we are done */
67 if (val == oldval)
68 return 0;
69
70 /*
71 * Write back the new configuration, and possibly re-enable
72 * the interrupt. If we fail to write a new configuration for
73 * an SPI then WARN and return an error. If we fail to write the
74 * configuration for a PPI this is most likely because the GIC
75 * does not allow us to set the configuration or we are in a
76 * non-secure mode, and hence it may not be catastrophic.
77 */
78 writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
79 if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val) {
80 if (WARN_ON(irq >= 32))
81 ret = -EINVAL;
82 else
83 pr_warn("GIC: PPI%d is secure or misconfigured\n",
84 irq - 16);
85 }
86
87 if (sync_access)
88 sync_access();
89
90 return ret;
91}
92
93void gic_dist_config(void __iomem *base, int gic_irqs,
94 void (*sync_access)(void))
95{
96 unsigned int i;
97
98 /*
99 * Set all global interrupts to be level triggered, active low.
100 */
101 for (i = 32; i < gic_irqs; i += 16)
102 writel_relaxed(GICD_INT_ACTLOW_LVLTRIG,
103 base + GIC_DIST_CONFIG + i / 4);
104
105 /*
106 * Set priority on all global interrupts.
107 */
108 for (i = 32; i < gic_irqs; i += 4)
109 writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
110
111 /*
112 * Deactivate and disable all SPIs. Leave the PPI and SGIs
113 * alone as they are in the redistributor registers on GICv3.
114 */
115 for (i = 32; i < gic_irqs; i += 32) {
116 writel_relaxed(GICD_INT_EN_CLR_X32,
117 base + GIC_DIST_ACTIVE_CLEAR + i / 8);
118 writel_relaxed(GICD_INT_EN_CLR_X32,
119 base + GIC_DIST_ENABLE_CLEAR + i / 8);
120 }
121
122 if (sync_access)
123 sync_access();
124}
125
126void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
127{
128 int i;
129
130 /*
131 * Deal with the banked PPI and SGI interrupts - disable all
132 * PPI interrupts, ensure all SGI interrupts are enabled.
133 * Make sure everything is deactivated.
134 */
135 writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR);
136 writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR);
137 writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);
138
139 /*
140 * Set priority on PPI and SGI interrupts
141 */
142 for (i = 0; i < 32; i += 4)
143 writel_relaxed(GICD_INT_DEF_PRI_X4,
144 base + GIC_DIST_PRI + i * 4 / 4);
145
146 if (sync_access)
147 sync_access();
148}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2002 ARM Limited, All Rights Reserved.
4 */
5
6#include <linux/interrupt.h>
7#include <linux/io.h>
8#include <linux/irq.h>
9#include <linux/irqchip/arm-gic.h>
10
11#include "irq-gic-common.h"
12
13static DEFINE_RAW_SPINLOCK(irq_controller_lock);
14
15void gic_enable_of_quirks(const struct device_node *np,
16 const struct gic_quirk *quirks, void *data)
17{
18 for (; quirks->desc; quirks++) {
19 if (!of_device_is_compatible(np, quirks->compatible))
20 continue;
21 if (quirks->init(data))
22 pr_info("GIC: enabling workaround for %s\n",
23 quirks->desc);
24 }
25}
26
27void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
28 void *data)
29{
30 for (; quirks->desc; quirks++) {
31 if (quirks->compatible)
32 continue;
33 if (quirks->iidr != (quirks->mask & iidr))
34 continue;
35 if (quirks->init(data))
36 pr_info("GIC: enabling workaround for %s\n",
37 quirks->desc);
38 }
39}
40
41int gic_configure_irq(unsigned int irq, unsigned int type,
42 void __iomem *base, void (*sync_access)(void))
43{
44 u32 confmask = 0x2 << ((irq % 16) * 2);
45 u32 confoff = (irq / 16) * 4;
46 u32 val, oldval;
47 int ret = 0;
48 unsigned long flags;
49
50 /*
51 * Read current configuration register, and insert the config
52 * for "irq", depending on "type".
53 */
54 raw_spin_lock_irqsave(&irq_controller_lock, flags);
55 val = oldval = readl_relaxed(base + confoff);
56 if (type & IRQ_TYPE_LEVEL_MASK)
57 val &= ~confmask;
58 else if (type & IRQ_TYPE_EDGE_BOTH)
59 val |= confmask;
60
61 /* If the current configuration is the same, then we are done */
62 if (val == oldval) {
63 raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
64 return 0;
65 }
66
67 /*
68 * Write back the new configuration, and possibly re-enable
69 * the interrupt. If we fail to write a new configuration for
70 * an SPI then WARN and return an error. If we fail to write the
71 * configuration for a PPI this is most likely because the GIC
72 * does not allow us to set the configuration or we are in a
73 * non-secure mode, and hence it may not be catastrophic.
74 */
75 writel_relaxed(val, base + confoff);
76 if (readl_relaxed(base + confoff) != val)
77 ret = -EINVAL;
78
79 raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
80
81 if (sync_access)
82 sync_access();
83
84 return ret;
85}
86
87void gic_dist_config(void __iomem *base, int gic_irqs,
88 void (*sync_access)(void))
89{
90 unsigned int i;
91
92 /*
93 * Set all global interrupts to be level triggered, active low.
94 */
95 for (i = 32; i < gic_irqs; i += 16)
96 writel_relaxed(GICD_INT_ACTLOW_LVLTRIG,
97 base + GIC_DIST_CONFIG + i / 4);
98
99 /*
100 * Set priority on all global interrupts.
101 */
102 for (i = 32; i < gic_irqs; i += 4)
103 writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
104
105 /*
106 * Deactivate and disable all SPIs. Leave the PPI and SGIs
107 * alone as they are in the redistributor registers on GICv3.
108 */
109 for (i = 32; i < gic_irqs; i += 32) {
110 writel_relaxed(GICD_INT_EN_CLR_X32,
111 base + GIC_DIST_ACTIVE_CLEAR + i / 8);
112 writel_relaxed(GICD_INT_EN_CLR_X32,
113 base + GIC_DIST_ENABLE_CLEAR + i / 8);
114 }
115
116 if (sync_access)
117 sync_access();
118}
119
120void gic_cpu_config(void __iomem *base, int nr, void (*sync_access)(void))
121{
122 int i;
123
124 /*
125 * Deal with the banked PPI and SGI interrupts - disable all
126 * private interrupts. Make sure everything is deactivated.
127 */
128 for (i = 0; i < nr; i += 32) {
129 writel_relaxed(GICD_INT_EN_CLR_X32,
130 base + GIC_DIST_ACTIVE_CLEAR + i / 8);
131 writel_relaxed(GICD_INT_EN_CLR_X32,
132 base + GIC_DIST_ENABLE_CLEAR + i / 8);
133 }
134
135 /*
136 * Set priority on PPI and SGI interrupts
137 */
138 for (i = 0; i < nr; i += 4)
139 writel_relaxed(GICD_INT_DEF_PRI_X4,
140 base + GIC_DIST_PRI + i * 4 / 4);
141
142 if (sync_access)
143 sync_access();
144}