Loading...
1/*
2 * jc42.c - driver for Jedec JC42.4 compliant temperature sensors
3 *
4 * Copyright (c) 2010 Ericsson AB.
5 *
6 * Derived from lm77.c by Andras BALI <drewie@freemail.hu>.
7 *
8 * JC42.4 compliant temperature sensors are typically used on memory modules.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25#include <linux/module.h>
26#include <linux/init.h>
27#include <linux/slab.h>
28#include <linux/jiffies.h>
29#include <linux/i2c.h>
30#include <linux/hwmon.h>
31#include <linux/err.h>
32#include <linux/mutex.h>
33#include <linux/of.h>
34
35/* Addresses to scan */
36static const unsigned short normal_i2c[] = {
37 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, I2C_CLIENT_END };
38
39/* JC42 registers. All registers are 16 bit. */
40#define JC42_REG_CAP 0x00
41#define JC42_REG_CONFIG 0x01
42#define JC42_REG_TEMP_UPPER 0x02
43#define JC42_REG_TEMP_LOWER 0x03
44#define JC42_REG_TEMP_CRITICAL 0x04
45#define JC42_REG_TEMP 0x05
46#define JC42_REG_MANID 0x06
47#define JC42_REG_DEVICEID 0x07
48
49/* Status bits in temperature register */
50#define JC42_ALARM_CRIT_BIT 15
51#define JC42_ALARM_MAX_BIT 14
52#define JC42_ALARM_MIN_BIT 13
53
54/* Configuration register defines */
55#define JC42_CFG_CRIT_ONLY (1 << 2)
56#define JC42_CFG_TCRIT_LOCK (1 << 6)
57#define JC42_CFG_EVENT_LOCK (1 << 7)
58#define JC42_CFG_SHUTDOWN (1 << 8)
59#define JC42_CFG_HYST_SHIFT 9
60#define JC42_CFG_HYST_MASK (0x03 << 9)
61
62/* Capabilities */
63#define JC42_CAP_RANGE (1 << 2)
64
65/* Manufacturer IDs */
66#define ADT_MANID 0x11d4 /* Analog Devices */
67#define ATMEL_MANID 0x001f /* Atmel */
68#define ATMEL_MANID2 0x1114 /* Atmel */
69#define MAX_MANID 0x004d /* Maxim */
70#define IDT_MANID 0x00b3 /* IDT */
71#define MCP_MANID 0x0054 /* Microchip */
72#define NXP_MANID 0x1131 /* NXP Semiconductors */
73#define ONS_MANID 0x1b09 /* ON Semiconductor */
74#define STM_MANID 0x104a /* ST Microelectronics */
75
76/* Supported chips */
77
78/* Analog Devices */
79#define ADT7408_DEVID 0x0801
80#define ADT7408_DEVID_MASK 0xffff
81
82/* Atmel */
83#define AT30TS00_DEVID 0x8201
84#define AT30TS00_DEVID_MASK 0xffff
85
86#define AT30TSE004_DEVID 0x2200
87#define AT30TSE004_DEVID_MASK 0xffff
88
89/* IDT */
90#define TSE2004_DEVID 0x2200
91#define TSE2004_DEVID_MASK 0xff00
92
93#define TS3000_DEVID 0x2900 /* Also matches TSE2002 */
94#define TS3000_DEVID_MASK 0xff00
95
96#define TS3001_DEVID 0x3000
97#define TS3001_DEVID_MASK 0xff00
98
99/* Maxim */
100#define MAX6604_DEVID 0x3e00
101#define MAX6604_DEVID_MASK 0xffff
102
103/* Microchip */
104#define MCP9804_DEVID 0x0200
105#define MCP9804_DEVID_MASK 0xfffc
106
107#define MCP9808_DEVID 0x0400
108#define MCP9808_DEVID_MASK 0xfffc
109
110#define MCP98242_DEVID 0x2000
111#define MCP98242_DEVID_MASK 0xfffc
112
113#define MCP98243_DEVID 0x2100
114#define MCP98243_DEVID_MASK 0xfffc
115
116#define MCP98244_DEVID 0x2200
117#define MCP98244_DEVID_MASK 0xfffc
118
119#define MCP9843_DEVID 0x0000 /* Also matches mcp9805 */
120#define MCP9843_DEVID_MASK 0xfffe
121
122/* NXP */
123#define SE97_DEVID 0xa200
124#define SE97_DEVID_MASK 0xfffc
125
126#define SE98_DEVID 0xa100
127#define SE98_DEVID_MASK 0xfffc
128
129/* ON Semiconductor */
130#define CAT6095_DEVID 0x0800 /* Also matches CAT34TS02 */
131#define CAT6095_DEVID_MASK 0xffe0
132
133/* ST Microelectronics */
134#define STTS424_DEVID 0x0101
135#define STTS424_DEVID_MASK 0xffff
136
137#define STTS424E_DEVID 0x0000
138#define STTS424E_DEVID_MASK 0xfffe
139
140#define STTS2002_DEVID 0x0300
141#define STTS2002_DEVID_MASK 0xffff
142
143#define STTS2004_DEVID 0x2201
144#define STTS2004_DEVID_MASK 0xffff
145
146#define STTS3000_DEVID 0x0200
147#define STTS3000_DEVID_MASK 0xffff
148
149static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
150
151struct jc42_chips {
152 u16 manid;
153 u16 devid;
154 u16 devid_mask;
155};
156
157static struct jc42_chips jc42_chips[] = {
158 { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
159 { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
160 { ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK },
161 { IDT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK },
162 { IDT_MANID, TS3000_DEVID, TS3000_DEVID_MASK },
163 { IDT_MANID, TS3001_DEVID, TS3001_DEVID_MASK },
164 { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
165 { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
166 { MCP_MANID, MCP9808_DEVID, MCP9808_DEVID_MASK },
167 { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
168 { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
169 { MCP_MANID, MCP98244_DEVID, MCP98244_DEVID_MASK },
170 { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
171 { NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
172 { ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
173 { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
174 { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
175 { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
176 { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK },
177 { STM_MANID, STTS2004_DEVID, STTS2004_DEVID_MASK },
178 { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
179};
180
181enum temp_index {
182 t_input = 0,
183 t_crit,
184 t_min,
185 t_max,
186 t_num_temp
187};
188
189static const u8 temp_regs[t_num_temp] = {
190 [t_input] = JC42_REG_TEMP,
191 [t_crit] = JC42_REG_TEMP_CRITICAL,
192 [t_min] = JC42_REG_TEMP_LOWER,
193 [t_max] = JC42_REG_TEMP_UPPER,
194};
195
196/* Each client has this additional data */
197struct jc42_data {
198 struct i2c_client *client;
199 struct mutex update_lock; /* protect register access */
200 bool extended; /* true if extended range supported */
201 bool valid;
202 unsigned long last_updated; /* In jiffies */
203 u16 orig_config; /* original configuration */
204 u16 config; /* current configuration */
205 u16 temp[t_num_temp];/* Temperatures */
206};
207
208#define JC42_TEMP_MIN_EXTENDED (-40000)
209#define JC42_TEMP_MIN 0
210#define JC42_TEMP_MAX 125000
211
212static u16 jc42_temp_to_reg(long temp, bool extended)
213{
214 int ntemp = clamp_val(temp,
215 extended ? JC42_TEMP_MIN_EXTENDED :
216 JC42_TEMP_MIN, JC42_TEMP_MAX);
217
218 /* convert from 0.001 to 0.0625 resolution */
219 return (ntemp * 2 / 125) & 0x1fff;
220}
221
222static int jc42_temp_from_reg(s16 reg)
223{
224 reg = sign_extend32(reg, 12);
225
226 /* convert from 0.0625 to 0.001 resolution */
227 return reg * 125 / 2;
228}
229
230static struct jc42_data *jc42_update_device(struct device *dev)
231{
232 struct jc42_data *data = dev_get_drvdata(dev);
233 struct i2c_client *client = data->client;
234 struct jc42_data *ret = data;
235 int i, val;
236
237 mutex_lock(&data->update_lock);
238
239 if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
240 for (i = 0; i < t_num_temp; i++) {
241 val = i2c_smbus_read_word_swapped(client, temp_regs[i]);
242 if (val < 0) {
243 ret = ERR_PTR(val);
244 goto abort;
245 }
246 data->temp[i] = val;
247 }
248 data->last_updated = jiffies;
249 data->valid = true;
250 }
251abort:
252 mutex_unlock(&data->update_lock);
253 return ret;
254}
255
256static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
257 u32 attr, int channel, long *val)
258{
259 struct jc42_data *data = jc42_update_device(dev);
260 int temp, hyst;
261
262 if (IS_ERR(data))
263 return PTR_ERR(data);
264
265 switch (attr) {
266 case hwmon_temp_input:
267 *val = jc42_temp_from_reg(data->temp[t_input]);
268 return 0;
269 case hwmon_temp_min:
270 *val = jc42_temp_from_reg(data->temp[t_min]);
271 return 0;
272 case hwmon_temp_max:
273 *val = jc42_temp_from_reg(data->temp[t_max]);
274 return 0;
275 case hwmon_temp_crit:
276 *val = jc42_temp_from_reg(data->temp[t_crit]);
277 return 0;
278 case hwmon_temp_max_hyst:
279 temp = jc42_temp_from_reg(data->temp[t_max]);
280 hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
281 >> JC42_CFG_HYST_SHIFT];
282 *val = temp - hyst;
283 return 0;
284 case hwmon_temp_crit_hyst:
285 temp = jc42_temp_from_reg(data->temp[t_crit]);
286 hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
287 >> JC42_CFG_HYST_SHIFT];
288 *val = temp - hyst;
289 return 0;
290 case hwmon_temp_min_alarm:
291 *val = (data->temp[t_input] >> JC42_ALARM_MIN_BIT) & 1;
292 return 0;
293 case hwmon_temp_max_alarm:
294 *val = (data->temp[t_input] >> JC42_ALARM_MAX_BIT) & 1;
295 return 0;
296 case hwmon_temp_crit_alarm:
297 *val = (data->temp[t_input] >> JC42_ALARM_CRIT_BIT) & 1;
298 return 0;
299 default:
300 return -EOPNOTSUPP;
301 }
302}
303
304static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
305 u32 attr, int channel, long val)
306{
307 struct jc42_data *data = dev_get_drvdata(dev);
308 struct i2c_client *client = data->client;
309 int diff, hyst;
310 int ret;
311
312 mutex_lock(&data->update_lock);
313
314 switch (attr) {
315 case hwmon_temp_min:
316 data->temp[t_min] = jc42_temp_to_reg(val, data->extended);
317 ret = i2c_smbus_write_word_swapped(client, temp_regs[t_min],
318 data->temp[t_min]);
319 break;
320 case hwmon_temp_max:
321 data->temp[t_max] = jc42_temp_to_reg(val, data->extended);
322 ret = i2c_smbus_write_word_swapped(client, temp_regs[t_max],
323 data->temp[t_max]);
324 break;
325 case hwmon_temp_crit:
326 data->temp[t_crit] = jc42_temp_to_reg(val, data->extended);
327 ret = i2c_smbus_write_word_swapped(client, temp_regs[t_crit],
328 data->temp[t_crit]);
329 break;
330 case hwmon_temp_crit_hyst:
331 /*
332 * JC42.4 compliant chips only support four hysteresis values.
333 * Pick best choice and go from there.
334 */
335 val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED
336 : JC42_TEMP_MIN) - 6000,
337 JC42_TEMP_MAX);
338 diff = jc42_temp_from_reg(data->temp[t_crit]) - val;
339 hyst = 0;
340 if (diff > 0) {
341 if (diff < 2250)
342 hyst = 1; /* 1.5 degrees C */
343 else if (diff < 4500)
344 hyst = 2; /* 3.0 degrees C */
345 else
346 hyst = 3; /* 6.0 degrees C */
347 }
348 data->config = (data->config & ~JC42_CFG_HYST_MASK) |
349 (hyst << JC42_CFG_HYST_SHIFT);
350 ret = i2c_smbus_write_word_swapped(data->client,
351 JC42_REG_CONFIG,
352 data->config);
353 break;
354 default:
355 ret = -EOPNOTSUPP;
356 break;
357 }
358
359 mutex_unlock(&data->update_lock);
360
361 return ret;
362}
363
364static umode_t jc42_is_visible(const void *_data, enum hwmon_sensor_types type,
365 u32 attr, int channel)
366{
367 const struct jc42_data *data = _data;
368 unsigned int config = data->config;
369 umode_t mode = S_IRUGO;
370
371 switch (attr) {
372 case hwmon_temp_min:
373 case hwmon_temp_max:
374 if (!(config & JC42_CFG_EVENT_LOCK))
375 mode |= S_IWUSR;
376 break;
377 case hwmon_temp_crit:
378 if (!(config & JC42_CFG_TCRIT_LOCK))
379 mode |= S_IWUSR;
380 break;
381 case hwmon_temp_crit_hyst:
382 if (!(config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK)))
383 mode |= S_IWUSR;
384 break;
385 case hwmon_temp_input:
386 case hwmon_temp_max_hyst:
387 case hwmon_temp_min_alarm:
388 case hwmon_temp_max_alarm:
389 case hwmon_temp_crit_alarm:
390 break;
391 default:
392 mode = 0;
393 break;
394 }
395 return mode;
396}
397
398/* Return 0 if detection is successful, -ENODEV otherwise */
399static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info)
400{
401 struct i2c_adapter *adapter = client->adapter;
402 int i, config, cap, manid, devid;
403
404 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
405 I2C_FUNC_SMBUS_WORD_DATA))
406 return -ENODEV;
407
408 cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
409 config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
410 manid = i2c_smbus_read_word_swapped(client, JC42_REG_MANID);
411 devid = i2c_smbus_read_word_swapped(client, JC42_REG_DEVICEID);
412
413 if (cap < 0 || config < 0 || manid < 0 || devid < 0)
414 return -ENODEV;
415
416 if ((cap & 0xff00) || (config & 0xf800))
417 return -ENODEV;
418
419 for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
420 struct jc42_chips *chip = &jc42_chips[i];
421 if (manid == chip->manid &&
422 (devid & chip->devid_mask) == chip->devid) {
423 strlcpy(info->type, "jc42", I2C_NAME_SIZE);
424 return 0;
425 }
426 }
427 return -ENODEV;
428}
429
430static const u32 jc42_temp_config[] = {
431 HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_CRIT |
432 HWMON_T_MAX_HYST | HWMON_T_CRIT_HYST |
433 HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM,
434 0
435};
436
437static const struct hwmon_channel_info jc42_temp = {
438 .type = hwmon_temp,
439 .config = jc42_temp_config,
440};
441
442static const struct hwmon_channel_info *jc42_info[] = {
443 &jc42_temp,
444 NULL
445};
446
447static const struct hwmon_ops jc42_hwmon_ops = {
448 .is_visible = jc42_is_visible,
449 .read = jc42_read,
450 .write = jc42_write,
451};
452
453static const struct hwmon_chip_info jc42_chip_info = {
454 .ops = &jc42_hwmon_ops,
455 .info = jc42_info,
456};
457
458static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id)
459{
460 struct device *dev = &client->dev;
461 struct device *hwmon_dev;
462 struct jc42_data *data;
463 int config, cap;
464
465 data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL);
466 if (!data)
467 return -ENOMEM;
468
469 data->client = client;
470 i2c_set_clientdata(client, data);
471 mutex_init(&data->update_lock);
472
473 cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
474 if (cap < 0)
475 return cap;
476
477 data->extended = !!(cap & JC42_CAP_RANGE);
478
479 config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
480 if (config < 0)
481 return config;
482
483 data->orig_config = config;
484 if (config & JC42_CFG_SHUTDOWN) {
485 config &= ~JC42_CFG_SHUTDOWN;
486 i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
487 }
488 data->config = config;
489
490 hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
491 data, &jc42_chip_info,
492 NULL);
493 return PTR_ERR_OR_ZERO(hwmon_dev);
494}
495
496static int jc42_remove(struct i2c_client *client)
497{
498 struct jc42_data *data = i2c_get_clientdata(client);
499
500 /* Restore original configuration except hysteresis */
501 if ((data->config & ~JC42_CFG_HYST_MASK) !=
502 (data->orig_config & ~JC42_CFG_HYST_MASK)) {
503 int config;
504
505 config = (data->orig_config & ~JC42_CFG_HYST_MASK)
506 | (data->config & JC42_CFG_HYST_MASK);
507 i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
508 }
509 return 0;
510}
511
512#ifdef CONFIG_PM
513
514static int jc42_suspend(struct device *dev)
515{
516 struct jc42_data *data = dev_get_drvdata(dev);
517
518 data->config |= JC42_CFG_SHUTDOWN;
519 i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
520 data->config);
521 return 0;
522}
523
524static int jc42_resume(struct device *dev)
525{
526 struct jc42_data *data = dev_get_drvdata(dev);
527
528 data->config &= ~JC42_CFG_SHUTDOWN;
529 i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
530 data->config);
531 return 0;
532}
533
534static const struct dev_pm_ops jc42_dev_pm_ops = {
535 .suspend = jc42_suspend,
536 .resume = jc42_resume,
537};
538
539#define JC42_DEV_PM_OPS (&jc42_dev_pm_ops)
540#else
541#define JC42_DEV_PM_OPS NULL
542#endif /* CONFIG_PM */
543
544static const struct i2c_device_id jc42_id[] = {
545 { "jc42", 0 },
546 { }
547};
548MODULE_DEVICE_TABLE(i2c, jc42_id);
549
550#ifdef CONFIG_OF
551static const struct of_device_id jc42_of_ids[] = {
552 { .compatible = "jedec,jc-42.4-temp", },
553 { }
554};
555MODULE_DEVICE_TABLE(of, jc42_of_ids);
556#endif
557
558static struct i2c_driver jc42_driver = {
559 .class = I2C_CLASS_SPD | I2C_CLASS_HWMON,
560 .driver = {
561 .name = "jc42",
562 .pm = JC42_DEV_PM_OPS,
563 .of_match_table = of_match_ptr(jc42_of_ids),
564 },
565 .probe = jc42_probe,
566 .remove = jc42_remove,
567 .id_table = jc42_id,
568 .detect = jc42_detect,
569 .address_list = normal_i2c,
570};
571
572module_i2c_driver(jc42_driver);
573
574MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
575MODULE_DESCRIPTION("JC42 driver");
576MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * jc42.c - driver for Jedec JC42.4 compliant temperature sensors
4 *
5 * Copyright (c) 2010 Ericsson AB.
6 *
7 * Derived from lm77.c by Andras BALI <drewie@freemail.hu>.
8 *
9 * JC42.4 compliant temperature sensors are typically used on memory modules.
10 */
11
12#include <linux/bitops.h>
13#include <linux/bitfield.h>
14#include <linux/module.h>
15#include <linux/init.h>
16#include <linux/slab.h>
17#include <linux/jiffies.h>
18#include <linux/i2c.h>
19#include <linux/hwmon.h>
20#include <linux/err.h>
21#include <linux/mutex.h>
22#include <linux/of.h>
23#include <linux/regmap.h>
24
25/* Addresses to scan */
26static const unsigned short normal_i2c[] = {
27 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, I2C_CLIENT_END };
28
29/* JC42 registers. All registers are 16 bit. */
30#define JC42_REG_CAP 0x00
31#define JC42_REG_CONFIG 0x01
32#define JC42_REG_TEMP_UPPER 0x02
33#define JC42_REG_TEMP_LOWER 0x03
34#define JC42_REG_TEMP_CRITICAL 0x04
35#define JC42_REG_TEMP 0x05
36#define JC42_REG_MANID 0x06
37#define JC42_REG_DEVICEID 0x07
38#define JC42_REG_SMBUS 0x22 /* NXP and Atmel, possibly others? */
39
40/* Status bits in temperature register */
41#define JC42_ALARM_CRIT BIT(15)
42#define JC42_ALARM_MAX BIT(14)
43#define JC42_ALARM_MIN BIT(13)
44
45/* Configuration register defines */
46#define JC42_CFG_CRIT_ONLY BIT(2)
47#define JC42_CFG_TCRIT_LOCK BIT(6)
48#define JC42_CFG_EVENT_LOCK BIT(7)
49#define JC42_CFG_SHUTDOWN BIT(8)
50#define JC42_CFG_HYST_MASK GENMASK(10, 9)
51
52/* Capabilities */
53#define JC42_CAP_RANGE BIT(2)
54
55/* Manufacturer IDs */
56#define ADT_MANID 0x11d4 /* Analog Devices */
57#define ATMEL_MANID 0x001f /* Atmel */
58#define ATMEL_MANID2 0x1114 /* Atmel */
59#define MAX_MANID 0x004d /* Maxim */
60#define IDT_MANID 0x00b3 /* IDT */
61#define MCP_MANID 0x0054 /* Microchip */
62#define NXP_MANID 0x1131 /* NXP Semiconductors */
63#define ONS_MANID 0x1b09 /* ON Semiconductor */
64#define STM_MANID 0x104a /* ST Microelectronics */
65#define GT_MANID 0x1c68 /* Giantec */
66#define GT_MANID2 0x132d /* Giantec, 2nd mfg ID */
67#define SI_MANID 0x1c85 /* Seiko Instruments */
68
69/* SMBUS register */
70#define SMBUS_STMOUT BIT(7) /* SMBus time-out, active low */
71
72/* Supported chips */
73
74/* Analog Devices */
75#define ADT7408_DEVID 0x0801
76#define ADT7408_DEVID_MASK 0xffff
77
78/* Atmel */
79#define AT30TS00_DEVID 0x8201
80#define AT30TS00_DEVID_MASK 0xffff
81
82#define AT30TSE004_DEVID 0x2200
83#define AT30TSE004_DEVID_MASK 0xffff
84
85/* Giantec */
86#define GT30TS00_DEVID 0x2200
87#define GT30TS00_DEVID_MASK 0xff00
88
89#define GT34TS02_DEVID 0x3300
90#define GT34TS02_DEVID_MASK 0xff00
91
92/* IDT */
93#define TSE2004_DEVID 0x2200
94#define TSE2004_DEVID_MASK 0xff00
95
96#define TS3000_DEVID 0x2900 /* Also matches TSE2002 */
97#define TS3000_DEVID_MASK 0xff00
98
99#define TS3001_DEVID 0x3000
100#define TS3001_DEVID_MASK 0xff00
101
102/* Maxim */
103#define MAX6604_DEVID 0x3e00
104#define MAX6604_DEVID_MASK 0xffff
105
106/* Microchip */
107#define MCP9804_DEVID 0x0200
108#define MCP9804_DEVID_MASK 0xfffc
109
110#define MCP9808_DEVID 0x0400
111#define MCP9808_DEVID_MASK 0xfffc
112
113#define MCP98242_DEVID 0x2000
114#define MCP98242_DEVID_MASK 0xfffc
115
116#define MCP98243_DEVID 0x2100
117#define MCP98243_DEVID_MASK 0xfffc
118
119#define MCP98244_DEVID 0x2200
120#define MCP98244_DEVID_MASK 0xfffc
121
122#define MCP9843_DEVID 0x0000 /* Also matches mcp9805 */
123#define MCP9843_DEVID_MASK 0xfffe
124
125/* NXP */
126#define SE97_DEVID 0xa200
127#define SE97_DEVID_MASK 0xfffc
128
129#define SE98_DEVID 0xa100
130#define SE98_DEVID_MASK 0xfffc
131
132/* ON Semiconductor */
133#define CAT6095_DEVID 0x0800 /* Also matches CAT34TS02 */
134#define CAT6095_DEVID_MASK 0xffe0
135
136#define CAT34TS02C_DEVID 0x0a00
137#define CAT34TS02C_DEVID_MASK 0xfff0
138
139#define CAT34TS04_DEVID 0x2200
140#define CAT34TS04_DEVID_MASK 0xfff0
141
142#define N34TS04_DEVID 0x2230
143#define N34TS04_DEVID_MASK 0xfff0
144
145/* ST Microelectronics */
146#define STTS424_DEVID 0x0101
147#define STTS424_DEVID_MASK 0xffff
148
149#define STTS424E_DEVID 0x0000
150#define STTS424E_DEVID_MASK 0xfffe
151
152#define STTS2002_DEVID 0x0300
153#define STTS2002_DEVID_MASK 0xffff
154
155#define STTS2004_DEVID 0x2201
156#define STTS2004_DEVID_MASK 0xffff
157
158#define STTS3000_DEVID 0x0200
159#define STTS3000_DEVID_MASK 0xffff
160
161/* Seiko Instruments */
162#define S34TS04A_DEVID 0x2221
163#define S34TS04A_DEVID_MASK 0xffff
164
165static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
166
167struct jc42_chips {
168 u16 manid;
169 u16 devid;
170 u16 devid_mask;
171};
172
173static struct jc42_chips jc42_chips[] = {
174 { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
175 { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
176 { ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK },
177 { GT_MANID, GT30TS00_DEVID, GT30TS00_DEVID_MASK },
178 { GT_MANID2, GT34TS02_DEVID, GT34TS02_DEVID_MASK },
179 { IDT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK },
180 { IDT_MANID, TS3000_DEVID, TS3000_DEVID_MASK },
181 { IDT_MANID, TS3001_DEVID, TS3001_DEVID_MASK },
182 { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
183 { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
184 { MCP_MANID, MCP9808_DEVID, MCP9808_DEVID_MASK },
185 { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
186 { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
187 { MCP_MANID, MCP98244_DEVID, MCP98244_DEVID_MASK },
188 { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
189 { NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
190 { ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
191 { ONS_MANID, CAT34TS02C_DEVID, CAT34TS02C_DEVID_MASK },
192 { ONS_MANID, CAT34TS04_DEVID, CAT34TS04_DEVID_MASK },
193 { ONS_MANID, N34TS04_DEVID, N34TS04_DEVID_MASK },
194 { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
195 { SI_MANID, S34TS04A_DEVID, S34TS04A_DEVID_MASK },
196 { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
197 { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
198 { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK },
199 { STM_MANID, STTS2004_DEVID, STTS2004_DEVID_MASK },
200 { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
201};
202
203/* Each client has this additional data */
204struct jc42_data {
205 struct mutex update_lock; /* protect register access */
206 struct regmap *regmap;
207 bool extended; /* true if extended range supported */
208 bool valid;
209 u16 orig_config; /* original configuration */
210 u16 config; /* current configuration */
211};
212
213#define JC42_TEMP_MIN_EXTENDED (-40000)
214#define JC42_TEMP_MIN 0
215#define JC42_TEMP_MAX 125000
216
217static u16 jc42_temp_to_reg(long temp, bool extended)
218{
219 int ntemp = clamp_val(temp,
220 extended ? JC42_TEMP_MIN_EXTENDED :
221 JC42_TEMP_MIN, JC42_TEMP_MAX);
222
223 /* convert from 0.001 to 0.0625 resolution */
224 return (ntemp * 2 / 125) & 0x1fff;
225}
226
227static int jc42_temp_from_reg(s16 reg)
228{
229 reg = sign_extend32(reg, 12);
230
231 /* convert from 0.0625 to 0.001 resolution */
232 return reg * 125 / 2;
233}
234
235static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
236 u32 attr, int channel, long *val)
237{
238 struct jc42_data *data = dev_get_drvdata(dev);
239 unsigned int regval;
240 int ret, temp, hyst;
241
242 mutex_lock(&data->update_lock);
243
244 switch (attr) {
245 case hwmon_temp_input:
246 ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val);
247 if (ret)
248 break;
249
250 *val = jc42_temp_from_reg(regval);
251 break;
252 case hwmon_temp_min:
253 ret = regmap_read(data->regmap, JC42_REG_TEMP_LOWER, ®val);
254 if (ret)
255 break;
256
257 *val = jc42_temp_from_reg(regval);
258 break;
259 case hwmon_temp_max:
260 ret = regmap_read(data->regmap, JC42_REG_TEMP_UPPER, ®val);
261 if (ret)
262 break;
263
264 *val = jc42_temp_from_reg(regval);
265 break;
266 case hwmon_temp_crit:
267 ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL,
268 ®val);
269 if (ret)
270 break;
271
272 *val = jc42_temp_from_reg(regval);
273 break;
274 case hwmon_temp_max_hyst:
275 ret = regmap_read(data->regmap, JC42_REG_TEMP_UPPER, ®val);
276 if (ret)
277 break;
278
279 temp = jc42_temp_from_reg(regval);
280 hyst = jc42_hysteresis[FIELD_GET(JC42_CFG_HYST_MASK,
281 data->config)];
282 *val = temp - hyst;
283 break;
284 case hwmon_temp_crit_hyst:
285 ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL,
286 ®val);
287 if (ret)
288 break;
289
290 temp = jc42_temp_from_reg(regval);
291 hyst = jc42_hysteresis[FIELD_GET(JC42_CFG_HYST_MASK,
292 data->config)];
293 *val = temp - hyst;
294 break;
295 case hwmon_temp_min_alarm:
296 ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val);
297 if (ret)
298 break;
299
300 *val = FIELD_GET(JC42_ALARM_MIN, regval);
301 break;
302 case hwmon_temp_max_alarm:
303 ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val);
304 if (ret)
305 break;
306
307 *val = FIELD_GET(JC42_ALARM_MAX, regval);
308 break;
309 case hwmon_temp_crit_alarm:
310 ret = regmap_read(data->regmap, JC42_REG_TEMP, ®val);
311 if (ret)
312 break;
313
314 *val = FIELD_GET(JC42_ALARM_CRIT, regval);
315 break;
316 default:
317 ret = -EOPNOTSUPP;
318 break;
319 }
320
321 mutex_unlock(&data->update_lock);
322
323 return ret;
324}
325
326static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
327 u32 attr, int channel, long val)
328{
329 struct jc42_data *data = dev_get_drvdata(dev);
330 unsigned int regval;
331 int diff, hyst;
332 int ret;
333
334 mutex_lock(&data->update_lock);
335
336 switch (attr) {
337 case hwmon_temp_min:
338 ret = regmap_write(data->regmap, JC42_REG_TEMP_LOWER,
339 jc42_temp_to_reg(val, data->extended));
340 break;
341 case hwmon_temp_max:
342 ret = regmap_write(data->regmap, JC42_REG_TEMP_UPPER,
343 jc42_temp_to_reg(val, data->extended));
344 break;
345 case hwmon_temp_crit:
346 ret = regmap_write(data->regmap, JC42_REG_TEMP_CRITICAL,
347 jc42_temp_to_reg(val, data->extended));
348 break;
349 case hwmon_temp_crit_hyst:
350 ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL,
351 ®val);
352 if (ret)
353 break;
354
355 /*
356 * JC42.4 compliant chips only support four hysteresis values.
357 * Pick best choice and go from there.
358 */
359 val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED
360 : JC42_TEMP_MIN) - 6000,
361 JC42_TEMP_MAX);
362 diff = jc42_temp_from_reg(regval) - val;
363 hyst = 0;
364 if (diff > 0) {
365 if (diff < 2250)
366 hyst = 1; /* 1.5 degrees C */
367 else if (diff < 4500)
368 hyst = 2; /* 3.0 degrees C */
369 else
370 hyst = 3; /* 6.0 degrees C */
371 }
372 data->config = (data->config & ~JC42_CFG_HYST_MASK) |
373 FIELD_PREP(JC42_CFG_HYST_MASK, hyst);
374 ret = regmap_write(data->regmap, JC42_REG_CONFIG,
375 data->config);
376 break;
377 default:
378 ret = -EOPNOTSUPP;
379 break;
380 }
381
382 mutex_unlock(&data->update_lock);
383
384 return ret;
385}
386
387static umode_t jc42_is_visible(const void *_data, enum hwmon_sensor_types type,
388 u32 attr, int channel)
389{
390 const struct jc42_data *data = _data;
391 unsigned int config = data->config;
392 umode_t mode = 0444;
393
394 switch (attr) {
395 case hwmon_temp_min:
396 case hwmon_temp_max:
397 if (!(config & JC42_CFG_EVENT_LOCK))
398 mode |= 0200;
399 break;
400 case hwmon_temp_crit:
401 if (!(config & JC42_CFG_TCRIT_LOCK))
402 mode |= 0200;
403 break;
404 case hwmon_temp_crit_hyst:
405 if (!(config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK)))
406 mode |= 0200;
407 break;
408 case hwmon_temp_input:
409 case hwmon_temp_max_hyst:
410 case hwmon_temp_min_alarm:
411 case hwmon_temp_max_alarm:
412 case hwmon_temp_crit_alarm:
413 break;
414 default:
415 mode = 0;
416 break;
417 }
418 return mode;
419}
420
421/* Return 0 if detection is successful, -ENODEV otherwise */
422static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info)
423{
424 struct i2c_adapter *adapter = client->adapter;
425 int i, config, cap, manid, devid;
426
427 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
428 I2C_FUNC_SMBUS_WORD_DATA))
429 return -ENODEV;
430
431 cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
432 config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
433 manid = i2c_smbus_read_word_swapped(client, JC42_REG_MANID);
434 devid = i2c_smbus_read_word_swapped(client, JC42_REG_DEVICEID);
435
436 if (cap < 0 || config < 0 || manid < 0 || devid < 0)
437 return -ENODEV;
438
439 if ((cap & 0xff00) || (config & 0xf800))
440 return -ENODEV;
441
442 for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
443 struct jc42_chips *chip = &jc42_chips[i];
444 if (manid == chip->manid &&
445 (devid & chip->devid_mask) == chip->devid) {
446 strscpy(info->type, "jc42", I2C_NAME_SIZE);
447 return 0;
448 }
449 }
450 return -ENODEV;
451}
452
453static const struct hwmon_channel_info *jc42_info[] = {
454 HWMON_CHANNEL_INFO(chip,
455 HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL),
456 HWMON_CHANNEL_INFO(temp,
457 HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
458 HWMON_T_CRIT | HWMON_T_MAX_HYST |
459 HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM |
460 HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM),
461 NULL
462};
463
464static const struct hwmon_ops jc42_hwmon_ops = {
465 .is_visible = jc42_is_visible,
466 .read = jc42_read,
467 .write = jc42_write,
468};
469
470static const struct hwmon_chip_info jc42_chip_info = {
471 .ops = &jc42_hwmon_ops,
472 .info = jc42_info,
473};
474
475static bool jc42_readable_reg(struct device *dev, unsigned int reg)
476{
477 return (reg >= JC42_REG_CAP && reg <= JC42_REG_DEVICEID) ||
478 reg == JC42_REG_SMBUS;
479}
480
481static bool jc42_writable_reg(struct device *dev, unsigned int reg)
482{
483 return (reg >= JC42_REG_CONFIG && reg <= JC42_REG_TEMP_CRITICAL) ||
484 reg == JC42_REG_SMBUS;
485}
486
487static bool jc42_volatile_reg(struct device *dev, unsigned int reg)
488{
489 return reg == JC42_REG_CONFIG || reg == JC42_REG_TEMP;
490}
491
492static const struct regmap_config jc42_regmap_config = {
493 .reg_bits = 8,
494 .val_bits = 16,
495 .val_format_endian = REGMAP_ENDIAN_BIG,
496 .max_register = JC42_REG_SMBUS,
497 .writeable_reg = jc42_writable_reg,
498 .readable_reg = jc42_readable_reg,
499 .volatile_reg = jc42_volatile_reg,
500 .cache_type = REGCACHE_RBTREE,
501};
502
503static int jc42_probe(struct i2c_client *client)
504{
505 struct device *dev = &client->dev;
506 struct device *hwmon_dev;
507 unsigned int config, cap;
508 struct jc42_data *data;
509 int ret;
510
511 data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL);
512 if (!data)
513 return -ENOMEM;
514
515 data->regmap = devm_regmap_init_i2c(client, &jc42_regmap_config);
516 if (IS_ERR(data->regmap))
517 return PTR_ERR(data->regmap);
518
519 i2c_set_clientdata(client, data);
520 mutex_init(&data->update_lock);
521
522 ret = regmap_read(data->regmap, JC42_REG_CAP, &cap);
523 if (ret)
524 return ret;
525
526 data->extended = !!(cap & JC42_CAP_RANGE);
527
528 if (device_property_read_bool(dev, "smbus-timeout-disable")) {
529 /*
530 * Not all chips support this register, but from a
531 * quick read of various datasheets no chip appears
532 * incompatible with the below attempt to disable
533 * the timeout. And the whole thing is opt-in...
534 */
535 ret = regmap_set_bits(data->regmap, JC42_REG_SMBUS,
536 SMBUS_STMOUT);
537 if (ret)
538 return ret;
539 }
540
541 ret = regmap_read(data->regmap, JC42_REG_CONFIG, &config);
542 if (ret)
543 return ret;
544
545 data->orig_config = config;
546 if (config & JC42_CFG_SHUTDOWN) {
547 config &= ~JC42_CFG_SHUTDOWN;
548 regmap_write(data->regmap, JC42_REG_CONFIG, config);
549 }
550 data->config = config;
551
552 hwmon_dev = devm_hwmon_device_register_with_info(dev, "jc42",
553 data, &jc42_chip_info,
554 NULL);
555 return PTR_ERR_OR_ZERO(hwmon_dev);
556}
557
558static void jc42_remove(struct i2c_client *client)
559{
560 struct jc42_data *data = i2c_get_clientdata(client);
561
562 /* Restore original configuration except hysteresis */
563 if ((data->config & ~JC42_CFG_HYST_MASK) !=
564 (data->orig_config & ~JC42_CFG_HYST_MASK)) {
565 int config;
566
567 config = (data->orig_config & ~JC42_CFG_HYST_MASK)
568 | (data->config & JC42_CFG_HYST_MASK);
569 regmap_write(data->regmap, JC42_REG_CONFIG, config);
570 }
571}
572
573#ifdef CONFIG_PM
574
575static int jc42_suspend(struct device *dev)
576{
577 struct jc42_data *data = dev_get_drvdata(dev);
578
579 data->config |= JC42_CFG_SHUTDOWN;
580 regmap_write(data->regmap, JC42_REG_CONFIG, data->config);
581
582 regcache_cache_only(data->regmap, true);
583 regcache_mark_dirty(data->regmap);
584
585 return 0;
586}
587
588static int jc42_resume(struct device *dev)
589{
590 struct jc42_data *data = dev_get_drvdata(dev);
591
592 regcache_cache_only(data->regmap, false);
593
594 data->config &= ~JC42_CFG_SHUTDOWN;
595 regmap_write(data->regmap, JC42_REG_CONFIG, data->config);
596
597 /* Restore cached register values to hardware */
598 return regcache_sync(data->regmap);
599}
600
601static const struct dev_pm_ops jc42_dev_pm_ops = {
602 .suspend = jc42_suspend,
603 .resume = jc42_resume,
604};
605
606#define JC42_DEV_PM_OPS (&jc42_dev_pm_ops)
607#else
608#define JC42_DEV_PM_OPS NULL
609#endif /* CONFIG_PM */
610
611static const struct i2c_device_id jc42_id[] = {
612 { "jc42", 0 },
613 { }
614};
615MODULE_DEVICE_TABLE(i2c, jc42_id);
616
617#ifdef CONFIG_OF
618static const struct of_device_id jc42_of_ids[] = {
619 { .compatible = "jedec,jc-42.4-temp", },
620 { }
621};
622MODULE_DEVICE_TABLE(of, jc42_of_ids);
623#endif
624
625static struct i2c_driver jc42_driver = {
626 .class = I2C_CLASS_SPD | I2C_CLASS_HWMON,
627 .driver = {
628 .name = "jc42",
629 .pm = JC42_DEV_PM_OPS,
630 .of_match_table = of_match_ptr(jc42_of_ids),
631 },
632 .probe_new = jc42_probe,
633 .remove = jc42_remove,
634 .id_table = jc42_id,
635 .detect = jc42_detect,
636 .address_list = normal_i2c,
637};
638
639module_i2c_driver(jc42_driver);
640
641MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
642MODULE_DESCRIPTION("JC42 driver");
643MODULE_LICENSE("GPL");