Loading...
1/*
2 * Changes:
3 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> 08/23/2000
4 * - get rid of some verify_areas and use __copy*user and __get/put_user
5 * for the ones that remain
6 */
7#include <linux/module.h>
8#include <linux/blkdev.h>
9#include <linux/interrupt.h>
10#include <linux/errno.h>
11#include <linux/kernel.h>
12#include <linux/sched.h>
13#include <linux/mm.h>
14#include <linux/string.h>
15#include <linux/uaccess.h>
16
17#include <scsi/scsi.h>
18#include <scsi/scsi_cmnd.h>
19#include <scsi/scsi_device.h>
20#include <scsi/scsi_eh.h>
21#include <scsi/scsi_host.h>
22#include <scsi/scsi_ioctl.h>
23#include <scsi/sg.h>
24#include <scsi/scsi_dbg.h>
25
26#include "scsi_logging.h"
27
28#define NORMAL_RETRIES 5
29#define IOCTL_NORMAL_TIMEOUT (10 * HZ)
30
31#define MAX_BUF PAGE_SIZE
32
33/**
34 * ioctl_probe -- return host identification
35 * @host: host to identify
36 * @buffer: userspace buffer for identification
37 *
38 * Return an identifying string at @buffer, if @buffer is non-NULL, filling
39 * to the length stored at * (int *) @buffer.
40 */
41static int ioctl_probe(struct Scsi_Host *host, void __user *buffer)
42{
43 unsigned int len, slen;
44 const char *string;
45
46 if (buffer) {
47 if (get_user(len, (unsigned int __user *) buffer))
48 return -EFAULT;
49
50 if (host->hostt->info)
51 string = host->hostt->info(host);
52 else
53 string = host->hostt->name;
54 if (string) {
55 slen = strlen(string);
56 if (len > slen)
57 len = slen + 1;
58 if (copy_to_user(buffer, string, len))
59 return -EFAULT;
60 }
61 }
62 return 1;
63}
64
65/*
66
67 * The SCSI_IOCTL_SEND_COMMAND ioctl sends a command out to the SCSI host.
68 * The IOCTL_NORMAL_TIMEOUT and NORMAL_RETRIES variables are used.
69 *
70 * dev is the SCSI device struct ptr, *(int *) arg is the length of the
71 * input data, if any, not including the command string & counts,
72 * *((int *)arg + 1) is the output buffer size in bytes.
73 *
74 * *(char *) ((int *) arg)[2] the actual command byte.
75 *
76 * Note that if more than MAX_BUF bytes are requested to be transferred,
77 * the ioctl will fail with error EINVAL.
78 *
79 * This size *does not* include the initial lengths that were passed.
80 *
81 * The SCSI command is read from the memory location immediately after the
82 * length words, and the input data is right after the command. The SCSI
83 * routines know the command size based on the opcode decode.
84 *
85 * The output area is then filled in starting from the command byte.
86 */
87
88static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,
89 int timeout, int retries)
90{
91 int result;
92 struct scsi_sense_hdr sshdr;
93
94 SCSI_LOG_IOCTL(1, sdev_printk(KERN_INFO, sdev,
95 "Trying ioctl with scsi command %d\n", *cmd));
96
97 result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0,
98 &sshdr, timeout, retries, NULL);
99
100 SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
101 "Ioctl returned 0x%x\n", result));
102
103 if ((driver_byte(result) & DRIVER_SENSE) &&
104 (scsi_sense_valid(&sshdr))) {
105 switch (sshdr.sense_key) {
106 case ILLEGAL_REQUEST:
107 if (cmd[0] == ALLOW_MEDIUM_REMOVAL)
108 sdev->lockable = 0;
109 else
110 sdev_printk(KERN_INFO, sdev,
111 "ioctl_internal_command: "
112 "ILLEGAL REQUEST "
113 "asc=0x%x ascq=0x%x\n",
114 sshdr.asc, sshdr.ascq);
115 break;
116 case NOT_READY: /* This happens if there is no disc in drive */
117 if (sdev->removable)
118 break;
119 case UNIT_ATTENTION:
120 if (sdev->removable) {
121 sdev->changed = 1;
122 result = 0; /* This is no longer considered an error */
123 break;
124 }
125 default: /* Fall through for non-removable media */
126 sdev_printk(KERN_INFO, sdev,
127 "ioctl_internal_command return code = %x\n",
128 result);
129 scsi_print_sense_hdr(sdev, NULL, &sshdr);
130 break;
131 }
132 }
133
134 SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
135 "IOCTL Releasing command\n"));
136 return result;
137}
138
139int scsi_set_medium_removal(struct scsi_device *sdev, char state)
140{
141 char scsi_cmd[MAX_COMMAND_SIZE];
142 int ret;
143
144 if (!sdev->removable || !sdev->lockable)
145 return 0;
146
147 scsi_cmd[0] = ALLOW_MEDIUM_REMOVAL;
148 scsi_cmd[1] = 0;
149 scsi_cmd[2] = 0;
150 scsi_cmd[3] = 0;
151 scsi_cmd[4] = state;
152 scsi_cmd[5] = 0;
153
154 ret = ioctl_internal_command(sdev, scsi_cmd,
155 IOCTL_NORMAL_TIMEOUT, NORMAL_RETRIES);
156 if (ret == 0)
157 sdev->locked = (state == SCSI_REMOVAL_PREVENT);
158 return ret;
159}
160EXPORT_SYMBOL(scsi_set_medium_removal);
161
162/*
163 * The scsi_ioctl_get_pci() function places into arg the value
164 * pci_dev::slot_name (8 characters) for the PCI device (if any).
165 * Returns: 0 on success
166 * -ENXIO if there isn't a PCI device pointer
167 * (could be because the SCSI driver hasn't been
168 * updated yet, or because it isn't a SCSI
169 * device)
170 * any copy_to_user() error on failure there
171 */
172static int scsi_ioctl_get_pci(struct scsi_device *sdev, void __user *arg)
173{
174 struct device *dev = scsi_get_device(sdev->host);
175 const char *name;
176
177 if (!dev)
178 return -ENXIO;
179
180 name = dev_name(dev);
181
182 /* compatibility with old ioctl which only returned
183 * 20 characters */
184 return copy_to_user(arg, name, min(strlen(name), (size_t)20))
185 ? -EFAULT: 0;
186}
187
188
189/**
190 * scsi_ioctl - Dispatch ioctl to scsi device
191 * @sdev: scsi device receiving ioctl
192 * @cmd: which ioctl is it
193 * @arg: data associated with ioctl
194 *
195 * Description: The scsi_ioctl() function differs from most ioctls in that it
196 * does not take a major/minor number as the dev field. Rather, it takes
197 * a pointer to a &struct scsi_device.
198 */
199int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
200{
201 char scsi_cmd[MAX_COMMAND_SIZE];
202
203 /* Check for deprecated ioctls ... all the ioctls which don't
204 * follow the new unique numbering scheme are deprecated */
205 switch (cmd) {
206 case SCSI_IOCTL_SEND_COMMAND:
207 case SCSI_IOCTL_TEST_UNIT_READY:
208 case SCSI_IOCTL_BENCHMARK_COMMAND:
209 case SCSI_IOCTL_SYNC:
210 case SCSI_IOCTL_START_UNIT:
211 case SCSI_IOCTL_STOP_UNIT:
212 printk(KERN_WARNING "program %s is using a deprecated SCSI "
213 "ioctl, please convert it to SG_IO\n", current->comm);
214 break;
215 default:
216 break;
217 }
218
219 switch (cmd) {
220 case SCSI_IOCTL_GET_IDLUN:
221 if (!access_ok(VERIFY_WRITE, arg, sizeof(struct scsi_idlun)))
222 return -EFAULT;
223
224 __put_user((sdev->id & 0xff)
225 + ((sdev->lun & 0xff) << 8)
226 + ((sdev->channel & 0xff) << 16)
227 + ((sdev->host->host_no & 0xff) << 24),
228 &((struct scsi_idlun __user *)arg)->dev_id);
229 __put_user(sdev->host->unique_id,
230 &((struct scsi_idlun __user *)arg)->host_unique_id);
231 return 0;
232 case SCSI_IOCTL_GET_BUS_NUMBER:
233 return put_user(sdev->host->host_no, (int __user *)arg);
234 case SCSI_IOCTL_PROBE_HOST:
235 return ioctl_probe(sdev->host, arg);
236 case SCSI_IOCTL_SEND_COMMAND:
237 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
238 return -EACCES;
239 return sg_scsi_ioctl(sdev->request_queue, NULL, 0, arg);
240 case SCSI_IOCTL_DOORLOCK:
241 return scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
242 case SCSI_IOCTL_DOORUNLOCK:
243 return scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
244 case SCSI_IOCTL_TEST_UNIT_READY:
245 return scsi_test_unit_ready(sdev, IOCTL_NORMAL_TIMEOUT,
246 NORMAL_RETRIES, NULL);
247 case SCSI_IOCTL_START_UNIT:
248 scsi_cmd[0] = START_STOP;
249 scsi_cmd[1] = 0;
250 scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0;
251 scsi_cmd[4] = 1;
252 return ioctl_internal_command(sdev, scsi_cmd,
253 START_STOP_TIMEOUT, NORMAL_RETRIES);
254 case SCSI_IOCTL_STOP_UNIT:
255 scsi_cmd[0] = START_STOP;
256 scsi_cmd[1] = 0;
257 scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0;
258 scsi_cmd[4] = 0;
259 return ioctl_internal_command(sdev, scsi_cmd,
260 START_STOP_TIMEOUT, NORMAL_RETRIES);
261 case SCSI_IOCTL_GET_PCI:
262 return scsi_ioctl_get_pci(sdev, arg);
263 case SG_SCSI_RESET:
264 return scsi_ioctl_reset(sdev, arg);
265 default:
266 if (sdev->host->hostt->ioctl)
267 return sdev->host->hostt->ioctl(sdev, cmd, arg);
268 }
269 return -EINVAL;
270}
271EXPORT_SYMBOL(scsi_ioctl);
272
273/*
274 * We can process a reset even when a device isn't fully operable.
275 */
276int scsi_ioctl_block_when_processing_errors(struct scsi_device *sdev, int cmd,
277 bool ndelay)
278{
279 if (cmd == SG_SCSI_RESET && ndelay) {
280 if (scsi_host_in_recovery(sdev->host))
281 return -EAGAIN;
282 } else {
283 if (!scsi_block_when_processing_errors(sdev))
284 return -ENODEV;
285 }
286
287 return 0;
288}
289EXPORT_SYMBOL_GPL(scsi_ioctl_block_when_processing_errors);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Changes:
4 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> 08/23/2000
5 * - get rid of some verify_areas and use __copy*user and __get/put_user
6 * for the ones that remain
7 */
8#include <linux/module.h>
9#include <linux/blkdev.h>
10#include <linux/interrupt.h>
11#include <linux/errno.h>
12#include <linux/kernel.h>
13#include <linux/sched.h>
14#include <linux/mm.h>
15#include <linux/string.h>
16#include <linux/uaccess.h>
17
18#include <scsi/scsi.h>
19#include <scsi/scsi_cmnd.h>
20#include <scsi/scsi_device.h>
21#include <scsi/scsi_eh.h>
22#include <scsi/scsi_host.h>
23#include <scsi/scsi_ioctl.h>
24#include <scsi/sg.h>
25#include <scsi/scsi_dbg.h>
26
27#include "scsi_logging.h"
28
29#define NORMAL_RETRIES 5
30#define IOCTL_NORMAL_TIMEOUT (10 * HZ)
31
32#define MAX_BUF PAGE_SIZE
33
34/**
35 * ioctl_probe -- return host identification
36 * @host: host to identify
37 * @buffer: userspace buffer for identification
38 *
39 * Return an identifying string at @buffer, if @buffer is non-NULL, filling
40 * to the length stored at * (int *) @buffer.
41 */
42static int ioctl_probe(struct Scsi_Host *host, void __user *buffer)
43{
44 unsigned int len, slen;
45 const char *string;
46
47 if (buffer) {
48 if (get_user(len, (unsigned int __user *) buffer))
49 return -EFAULT;
50
51 if (host->hostt->info)
52 string = host->hostt->info(host);
53 else
54 string = host->hostt->name;
55 if (string) {
56 slen = strlen(string);
57 if (len > slen)
58 len = slen + 1;
59 if (copy_to_user(buffer, string, len))
60 return -EFAULT;
61 }
62 }
63 return 1;
64}
65
66/*
67
68 * The SCSI_IOCTL_SEND_COMMAND ioctl sends a command out to the SCSI host.
69 * The IOCTL_NORMAL_TIMEOUT and NORMAL_RETRIES variables are used.
70 *
71 * dev is the SCSI device struct ptr, *(int *) arg is the length of the
72 * input data, if any, not including the command string & counts,
73 * *((int *)arg + 1) is the output buffer size in bytes.
74 *
75 * *(char *) ((int *) arg)[2] the actual command byte.
76 *
77 * Note that if more than MAX_BUF bytes are requested to be transferred,
78 * the ioctl will fail with error EINVAL.
79 *
80 * This size *does not* include the initial lengths that were passed.
81 *
82 * The SCSI command is read from the memory location immediately after the
83 * length words, and the input data is right after the command. The SCSI
84 * routines know the command size based on the opcode decode.
85 *
86 * The output area is then filled in starting from the command byte.
87 */
88
89static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,
90 int timeout, int retries)
91{
92 int result;
93 struct scsi_sense_hdr sshdr;
94
95 SCSI_LOG_IOCTL(1, sdev_printk(KERN_INFO, sdev,
96 "Trying ioctl with scsi command %d\n", *cmd));
97
98 result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0,
99 &sshdr, timeout, retries, NULL);
100
101 SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
102 "Ioctl returned 0x%x\n", result));
103
104 if (driver_byte(result) == DRIVER_SENSE &&
105 scsi_sense_valid(&sshdr)) {
106 switch (sshdr.sense_key) {
107 case ILLEGAL_REQUEST:
108 if (cmd[0] == ALLOW_MEDIUM_REMOVAL)
109 sdev->lockable = 0;
110 else
111 sdev_printk(KERN_INFO, sdev,
112 "ioctl_internal_command: "
113 "ILLEGAL REQUEST "
114 "asc=0x%x ascq=0x%x\n",
115 sshdr.asc, sshdr.ascq);
116 break;
117 case NOT_READY: /* This happens if there is no disc in drive */
118 if (sdev->removable)
119 break;
120 fallthrough;
121 case UNIT_ATTENTION:
122 if (sdev->removable) {
123 sdev->changed = 1;
124 result = 0; /* This is no longer considered an error */
125 break;
126 }
127 fallthrough; /* for non-removable media */
128 default:
129 sdev_printk(KERN_INFO, sdev,
130 "ioctl_internal_command return code = %x\n",
131 result);
132 scsi_print_sense_hdr(sdev, NULL, &sshdr);
133 break;
134 }
135 }
136
137 SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
138 "IOCTL Releasing command\n"));
139 return result;
140}
141
142int scsi_set_medium_removal(struct scsi_device *sdev, char state)
143{
144 char scsi_cmd[MAX_COMMAND_SIZE];
145 int ret;
146
147 if (!sdev->removable || !sdev->lockable)
148 return 0;
149
150 scsi_cmd[0] = ALLOW_MEDIUM_REMOVAL;
151 scsi_cmd[1] = 0;
152 scsi_cmd[2] = 0;
153 scsi_cmd[3] = 0;
154 scsi_cmd[4] = state;
155 scsi_cmd[5] = 0;
156
157 ret = ioctl_internal_command(sdev, scsi_cmd,
158 IOCTL_NORMAL_TIMEOUT, NORMAL_RETRIES);
159 if (ret == 0)
160 sdev->locked = (state == SCSI_REMOVAL_PREVENT);
161 return ret;
162}
163EXPORT_SYMBOL(scsi_set_medium_removal);
164
165/*
166 * The scsi_ioctl_get_pci() function places into arg the value
167 * pci_dev::slot_name (8 characters) for the PCI device (if any).
168 * Returns: 0 on success
169 * -ENXIO if there isn't a PCI device pointer
170 * (could be because the SCSI driver hasn't been
171 * updated yet, or because it isn't a SCSI
172 * device)
173 * any copy_to_user() error on failure there
174 */
175static int scsi_ioctl_get_pci(struct scsi_device *sdev, void __user *arg)
176{
177 struct device *dev = scsi_get_device(sdev->host);
178 const char *name;
179
180 if (!dev)
181 return -ENXIO;
182
183 name = dev_name(dev);
184
185 /* compatibility with old ioctl which only returned
186 * 20 characters */
187 return copy_to_user(arg, name, min(strlen(name), (size_t)20))
188 ? -EFAULT: 0;
189}
190
191
192static int scsi_ioctl_common(struct scsi_device *sdev, int cmd, void __user *arg)
193{
194 char scsi_cmd[MAX_COMMAND_SIZE];
195 struct scsi_sense_hdr sense_hdr;
196
197 /* Check for deprecated ioctls ... all the ioctls which don't
198 * follow the new unique numbering scheme are deprecated */
199 switch (cmd) {
200 case SCSI_IOCTL_SEND_COMMAND:
201 case SCSI_IOCTL_TEST_UNIT_READY:
202 case SCSI_IOCTL_BENCHMARK_COMMAND:
203 case SCSI_IOCTL_SYNC:
204 case SCSI_IOCTL_START_UNIT:
205 case SCSI_IOCTL_STOP_UNIT:
206 printk(KERN_WARNING "program %s is using a deprecated SCSI "
207 "ioctl, please convert it to SG_IO\n", current->comm);
208 break;
209 default:
210 break;
211 }
212
213 switch (cmd) {
214 case SCSI_IOCTL_GET_IDLUN: {
215 struct scsi_idlun v = {
216 .dev_id = (sdev->id & 0xff)
217 + ((sdev->lun & 0xff) << 8)
218 + ((sdev->channel & 0xff) << 16)
219 + ((sdev->host->host_no & 0xff) << 24),
220 .host_unique_id = sdev->host->unique_id
221 };
222 if (copy_to_user(arg, &v, sizeof(struct scsi_idlun)))
223 return -EFAULT;
224 return 0;
225 }
226 case SCSI_IOCTL_GET_BUS_NUMBER:
227 return put_user(sdev->host->host_no, (int __user *)arg);
228 case SCSI_IOCTL_PROBE_HOST:
229 return ioctl_probe(sdev->host, arg);
230 case SCSI_IOCTL_SEND_COMMAND:
231 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
232 return -EACCES;
233 return sg_scsi_ioctl(sdev->request_queue, NULL, 0, arg);
234 case SCSI_IOCTL_DOORLOCK:
235 return scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
236 case SCSI_IOCTL_DOORUNLOCK:
237 return scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
238 case SCSI_IOCTL_TEST_UNIT_READY:
239 return scsi_test_unit_ready(sdev, IOCTL_NORMAL_TIMEOUT,
240 NORMAL_RETRIES, &sense_hdr);
241 case SCSI_IOCTL_START_UNIT:
242 scsi_cmd[0] = START_STOP;
243 scsi_cmd[1] = 0;
244 scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0;
245 scsi_cmd[4] = 1;
246 return ioctl_internal_command(sdev, scsi_cmd,
247 START_STOP_TIMEOUT, NORMAL_RETRIES);
248 case SCSI_IOCTL_STOP_UNIT:
249 scsi_cmd[0] = START_STOP;
250 scsi_cmd[1] = 0;
251 scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0;
252 scsi_cmd[4] = 0;
253 return ioctl_internal_command(sdev, scsi_cmd,
254 START_STOP_TIMEOUT, NORMAL_RETRIES);
255 case SCSI_IOCTL_GET_PCI:
256 return scsi_ioctl_get_pci(sdev, arg);
257 case SG_SCSI_RESET:
258 return scsi_ioctl_reset(sdev, arg);
259 }
260 return -ENOIOCTLCMD;
261}
262
263/**
264 * scsi_ioctl - Dispatch ioctl to scsi device
265 * @sdev: scsi device receiving ioctl
266 * @cmd: which ioctl is it
267 * @arg: data associated with ioctl
268 *
269 * Description: The scsi_ioctl() function differs from most ioctls in that it
270 * does not take a major/minor number as the dev field. Rather, it takes
271 * a pointer to a &struct scsi_device.
272 */
273int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
274{
275 int ret = scsi_ioctl_common(sdev, cmd, arg);
276
277 if (ret != -ENOIOCTLCMD)
278 return ret;
279
280 if (sdev->host->hostt->ioctl)
281 return sdev->host->hostt->ioctl(sdev, cmd, arg);
282
283 return -EINVAL;
284}
285EXPORT_SYMBOL(scsi_ioctl);
286
287#ifdef CONFIG_COMPAT
288int scsi_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
289{
290 int ret = scsi_ioctl_common(sdev, cmd, arg);
291
292 if (ret != -ENOIOCTLCMD)
293 return ret;
294
295 if (sdev->host->hostt->compat_ioctl)
296 return sdev->host->hostt->compat_ioctl(sdev, cmd, arg);
297
298 return ret;
299}
300EXPORT_SYMBOL(scsi_compat_ioctl);
301#endif
302
303/*
304 * We can process a reset even when a device isn't fully operable.
305 */
306int scsi_ioctl_block_when_processing_errors(struct scsi_device *sdev, int cmd,
307 bool ndelay)
308{
309 if (cmd == SG_SCSI_RESET && ndelay) {
310 if (scsi_host_in_recovery(sdev->host))
311 return -EAGAIN;
312 } else {
313 if (!scsi_block_when_processing_errors(sdev))
314 return -ENODEV;
315 }
316
317 return 0;
318}
319EXPORT_SYMBOL_GPL(scsi_ioctl_block_when_processing_errors);