Linux Audio

Check our new training course

Loading...
v4.10.11
 
   1#include <linux/kernel.h>
   2#include <linux/module.h>
   3#include <linux/interrupt.h>
   4#include <linux/irq.h>
   5#include <linux/spinlock.h>
   6#include <linux/list.h>
   7#include <linux/device.h>
   8#include <linux/err.h>
   9#include <linux/debugfs.h>
  10#include <linux/seq_file.h>
  11#include <linux/gpio.h>
  12#include <linux/of_gpio.h>
  13#include <linux/idr.h>
  14#include <linux/slab.h>
  15#include <linux/acpi.h>
  16#include <linux/gpio/driver.h>
  17#include <linux/gpio/machine.h>
  18#include <linux/pinctrl/consumer.h>
  19#include <linux/cdev.h>
  20#include <linux/fs.h>
  21#include <linux/uaccess.h>
  22#include <linux/compat.h>
  23#include <linux/anon_inodes.h>
  24#include <linux/file.h>
  25#include <linux/kfifo.h>
  26#include <linux/poll.h>
  27#include <linux/timekeeping.h>
  28#include <uapi/linux/gpio.h>
  29
  30#include "gpiolib.h"
  31
  32#define CREATE_TRACE_POINTS
  33#include <trace/events/gpio.h>
  34
  35/* Implementation infrastructure for GPIO interfaces.
  36 *
  37 * The GPIO programming interface allows for inlining speed-critical
  38 * get/set operations for common cases, so that access to SOC-integrated
  39 * GPIOs can sometimes cost only an instruction or two per bit.
  40 */
  41
  42
  43/* When debugging, extend minimal trust to callers and platform code.
  44 * Also emit diagnostic messages that may help initial bringup, when
  45 * board setup or driver bugs are most common.
  46 *
  47 * Otherwise, minimize overhead in what may be bitbanging codepaths.
  48 */
  49#ifdef	DEBUG
  50#define	extra_checks	1
  51#else
  52#define	extra_checks	0
  53#endif
  54
  55/* Device and char device-related information */
  56static DEFINE_IDA(gpio_ida);
  57static dev_t gpio_devt;
  58#define GPIO_DEV_MAX 256 /* 256 GPIO chip devices supported */
  59static struct bus_type gpio_bus_type = {
  60	.name = "gpio",
  61};
  62
  63/* gpio_lock prevents conflicts during gpio_desc[] table updates.
  64 * While any GPIO is requested, its gpio_chip is not removable;
  65 * each GPIO's "requested" flag serves as a lock and refcount.
  66 */
  67DEFINE_SPINLOCK(gpio_lock);
  68
  69static DEFINE_MUTEX(gpio_lookup_lock);
  70static LIST_HEAD(gpio_lookup_list);
  71LIST_HEAD(gpio_devices);
  72
  73static void gpiochip_free_hogs(struct gpio_chip *chip);
 
 
 
  74static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip);
  75static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip);
  76static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip);
  77
  78static bool gpiolib_initialized;
  79
  80static inline void desc_set_label(struct gpio_desc *d, const char *label)
  81{
  82	d->label = label;
  83}
  84
  85/**
  86 * Convert a GPIO number to its descriptor
 
 
 
 
 
  87 */
  88struct gpio_desc *gpio_to_desc(unsigned gpio)
  89{
  90	struct gpio_device *gdev;
  91	unsigned long flags;
  92
  93	spin_lock_irqsave(&gpio_lock, flags);
  94
  95	list_for_each_entry(gdev, &gpio_devices, list) {
  96		if (gdev->base <= gpio &&
  97		    gdev->base + gdev->ngpio > gpio) {
  98			spin_unlock_irqrestore(&gpio_lock, flags);
  99			return &gdev->descs[gpio - gdev->base];
 100		}
 101	}
 102
 103	spin_unlock_irqrestore(&gpio_lock, flags);
 104
 105	if (!gpio_is_valid(gpio))
 106		WARN(1, "invalid GPIO %d\n", gpio);
 107
 108	return NULL;
 109}
 110EXPORT_SYMBOL_GPL(gpio_to_desc);
 111
 112/**
 113 * Get the GPIO descriptor corresponding to the given hw number for this chip.
 
 
 
 
 
 
 
 114 */
 115struct gpio_desc *gpiochip_get_desc(struct gpio_chip *chip,
 116				    u16 hwnum)
 117{
 118	struct gpio_device *gdev = chip->gpiodev;
 119
 120	if (hwnum >= gdev->ngpio)
 121		return ERR_PTR(-EINVAL);
 122
 123	return &gdev->descs[hwnum];
 124}
 125
 126/**
 127 * Convert a GPIO descriptor to the integer namespace.
 
 
 128 * This should disappear in the future but is needed since we still
 129 * use GPIO numbers for error messages and sysfs nodes
 
 
 
 130 */
 131int desc_to_gpio(const struct gpio_desc *desc)
 132{
 133	return desc->gdev->base + (desc - &desc->gdev->descs[0]);
 134}
 135EXPORT_SYMBOL_GPL(desc_to_gpio);
 136
 137
 138/**
 139 * gpiod_to_chip - Return the GPIO chip to which a GPIO descriptor belongs
 140 * @desc:	descriptor to return the chip of
 141 */
 142struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
 143{
 144	if (!desc || !desc->gdev || !desc->gdev->chip)
 145		return NULL;
 146	return desc->gdev->chip;
 147}
 148EXPORT_SYMBOL_GPL(gpiod_to_chip);
 149
 150/* dynamic allocation of GPIOs, e.g. on a hotplugged device */
 151static int gpiochip_find_base(int ngpio)
 152{
 153	struct gpio_device *gdev;
 154	int base = ARCH_NR_GPIOS - ngpio;
 155
 156	list_for_each_entry_reverse(gdev, &gpio_devices, list) {
 157		/* found a free space? */
 158		if (gdev->base + gdev->ngpio <= base)
 159			break;
 160		else
 161			/* nope, check the space right before the chip */
 162			base = gdev->base - ngpio;
 163	}
 164
 165	if (gpio_is_valid(base)) {
 166		pr_debug("%s: found new base at %d\n", __func__, base);
 167		return base;
 168	} else {
 169		pr_err("%s: cannot find free range\n", __func__);
 170		return -ENOSPC;
 171	}
 172}
 173
 174/**
 175 * gpiod_get_direction - return the current direction of a GPIO
 176 * @desc:	GPIO to get the direction of
 177 *
 178 * Return GPIOF_DIR_IN or GPIOF_DIR_OUT, or an error code in case of error.
 179 *
 180 * This function may sleep if gpiod_cansleep() is true.
 181 */
 182int gpiod_get_direction(struct gpio_desc *desc)
 183{
 184	struct gpio_chip	*chip;
 185	unsigned		offset;
 186	int			status = -EINVAL;
 187
 188	chip = gpiod_to_chip(desc);
 189	offset = gpio_chip_hwgpio(desc);
 190
 191	if (!chip->get_direction)
 192		return status;
 193
 194	status = chip->get_direction(chip, offset);
 195	if (status > 0) {
 196		/* GPIOF_DIR_IN, or other positive */
 197		status = 1;
 198		clear_bit(FLAG_IS_OUT, &desc->flags);
 199	}
 200	if (status == 0) {
 201		/* GPIOF_DIR_OUT */
 202		set_bit(FLAG_IS_OUT, &desc->flags);
 203	}
 204	return status;
 205}
 206EXPORT_SYMBOL_GPL(gpiod_get_direction);
 207
 208/*
 209 * Add a new chip to the global chips list, keeping the list of chips sorted
 210 * by range(means [base, base + ngpio - 1]) order.
 211 *
 212 * Return -EBUSY if the new chip overlaps with some other chip's integer
 213 * space.
 214 */
 215static int gpiodev_add_to_list(struct gpio_device *gdev)
 216{
 217	struct gpio_device *prev, *next;
 218
 219	if (list_empty(&gpio_devices)) {
 220		/* initial entry in list */
 221		list_add_tail(&gdev->list, &gpio_devices);
 222		return 0;
 223	}
 224
 225	next = list_entry(gpio_devices.next, struct gpio_device, list);
 226	if (gdev->base + gdev->ngpio <= next->base) {
 227		/* add before first entry */
 228		list_add(&gdev->list, &gpio_devices);
 229		return 0;
 230	}
 231
 232	prev = list_entry(gpio_devices.prev, struct gpio_device, list);
 233	if (prev->base + prev->ngpio <= gdev->base) {
 234		/* add behind last entry */
 235		list_add_tail(&gdev->list, &gpio_devices);
 236		return 0;
 237	}
 238
 239	list_for_each_entry_safe(prev, next, &gpio_devices, list) {
 240		/* at the end of the list */
 241		if (&next->list == &gpio_devices)
 242			break;
 243
 244		/* add between prev and next */
 245		if (prev->base + prev->ngpio <= gdev->base
 246				&& gdev->base + gdev->ngpio <= next->base) {
 247			list_add(&gdev->list, &prev->list);
 248			return 0;
 249		}
 250	}
 251
 252	dev_err(&gdev->dev, "GPIO integer space overlap, cannot add chip\n");
 253	return -EBUSY;
 254}
 255
 256/**
 257 * Convert a GPIO name to its descriptor
 258 */
 259static struct gpio_desc *gpio_name_to_desc(const char * const name)
 260{
 261	struct gpio_device *gdev;
 262	unsigned long flags;
 263
 264	spin_lock_irqsave(&gpio_lock, flags);
 265
 266	list_for_each_entry(gdev, &gpio_devices, list) {
 267		int i;
 268
 269		for (i = 0; i != gdev->ngpio; ++i) {
 270			struct gpio_desc *desc = &gdev->descs[i];
 271
 272			if (!desc->name || !name)
 273				continue;
 274
 275			if (!strcmp(desc->name, name)) {
 276				spin_unlock_irqrestore(&gpio_lock, flags);
 277				return desc;
 278			}
 279		}
 280	}
 281
 282	spin_unlock_irqrestore(&gpio_lock, flags);
 283
 284	return NULL;
 285}
 286
 287/*
 288 * Takes the names from gc->names and checks if they are all unique. If they
 289 * are, they are assigned to their gpio descriptors.
 290 *
 291 * Warning if one of the names is already used for a different GPIO.
 292 */
 293static int gpiochip_set_desc_names(struct gpio_chip *gc)
 294{
 295	struct gpio_device *gdev = gc->gpiodev;
 296	int i;
 297
 298	if (!gc->names)
 299		return 0;
 300
 301	/* First check all names if they are unique */
 302	for (i = 0; i != gc->ngpio; ++i) {
 303		struct gpio_desc *gpio;
 304
 305		gpio = gpio_name_to_desc(gc->names[i]);
 306		if (gpio)
 307			dev_warn(&gdev->dev,
 308				 "Detected name collision for GPIO name '%s'\n",
 309				 gc->names[i]);
 310	}
 311
 312	/* Then add all names to the GPIO descriptors */
 313	for (i = 0; i != gc->ngpio; ++i)
 314		gdev->descs[i].name = gc->names[i];
 315
 316	return 0;
 317}
 318
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 319/*
 320 * GPIO line handle management
 321 */
 322
 323/**
 324 * struct linehandle_state - contains the state of a userspace handle
 325 * @gdev: the GPIO device the handle pertains to
 326 * @label: consumer label used to tag descriptors
 327 * @descs: the GPIO descriptors held by this handle
 328 * @numdescs: the number of descriptors held in the descs array
 329 */
 330struct linehandle_state {
 331	struct gpio_device *gdev;
 332	const char *label;
 333	struct gpio_desc *descs[GPIOHANDLES_MAX];
 334	u32 numdescs;
 335};
 336
 337#define GPIOHANDLE_REQUEST_VALID_FLAGS \
 338	(GPIOHANDLE_REQUEST_INPUT | \
 339	GPIOHANDLE_REQUEST_OUTPUT | \
 340	GPIOHANDLE_REQUEST_ACTIVE_LOW | \
 341	GPIOHANDLE_REQUEST_OPEN_DRAIN | \
 342	GPIOHANDLE_REQUEST_OPEN_SOURCE)
 343
 344static long linehandle_ioctl(struct file *filep, unsigned int cmd,
 345			     unsigned long arg)
 346{
 347	struct linehandle_state *lh = filep->private_data;
 348	void __user *ip = (void __user *)arg;
 349	struct gpiohandle_data ghd;
 
 350	int i;
 351
 352	if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) {
 353		int val;
 
 
 
 
 
 
 
 354
 355		memset(&ghd, 0, sizeof(ghd));
 356
 357		/* TODO: check if descriptors are really input */
 358		for (i = 0; i < lh->numdescs; i++) {
 359			val = gpiod_get_value_cansleep(lh->descs[i]);
 360			if (val < 0)
 361				return val;
 362			ghd.values[i] = val;
 363		}
 364
 365		if (copy_to_user(ip, &ghd, sizeof(ghd)))
 366			return -EFAULT;
 367
 368		return 0;
 369	} else if (cmd == GPIOHANDLE_SET_LINE_VALUES_IOCTL) {
 370		int vals[GPIOHANDLES_MAX];
 371
 372		/* TODO: check if descriptors are really output */
 373		if (copy_from_user(&ghd, ip, sizeof(ghd)))
 374			return -EFAULT;
 375
 376		/* Clamp all values to [0,1] */
 377		for (i = 0; i < lh->numdescs; i++)
 378			vals[i] = !!ghd.values[i];
 379
 380		/* Reuse the array setting function */
 381		gpiod_set_array_value_complex(false,
 382					      true,
 383					      lh->numdescs,
 384					      lh->descs,
 385					      vals);
 386		return 0;
 387	}
 388	return -EINVAL;
 389}
 390
 391#ifdef CONFIG_COMPAT
 392static long linehandle_ioctl_compat(struct file *filep, unsigned int cmd,
 393			     unsigned long arg)
 394{
 395	return linehandle_ioctl(filep, cmd, (unsigned long)compat_ptr(arg));
 396}
 397#endif
 398
 399static int linehandle_release(struct inode *inode, struct file *filep)
 400{
 401	struct linehandle_state *lh = filep->private_data;
 402	struct gpio_device *gdev = lh->gdev;
 403	int i;
 404
 405	for (i = 0; i < lh->numdescs; i++)
 406		gpiod_free(lh->descs[i]);
 407	kfree(lh->label);
 408	kfree(lh);
 409	put_device(&gdev->dev);
 410	return 0;
 411}
 412
 413static const struct file_operations linehandle_fileops = {
 414	.release = linehandle_release,
 415	.owner = THIS_MODULE,
 416	.llseek = noop_llseek,
 417	.unlocked_ioctl = linehandle_ioctl,
 418#ifdef CONFIG_COMPAT
 419	.compat_ioctl = linehandle_ioctl_compat,
 420#endif
 421};
 422
 423static int linehandle_create(struct gpio_device *gdev, void __user *ip)
 424{
 425	struct gpiohandle_request handlereq;
 426	struct linehandle_state *lh;
 427	struct file *file;
 428	int fd, i, ret;
 
 429
 430	if (copy_from_user(&handlereq, ip, sizeof(handlereq)))
 431		return -EFAULT;
 432	if ((handlereq.lines == 0) || (handlereq.lines > GPIOHANDLES_MAX))
 433		return -EINVAL;
 434
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 435	lh = kzalloc(sizeof(*lh), GFP_KERNEL);
 436	if (!lh)
 437		return -ENOMEM;
 438	lh->gdev = gdev;
 439	get_device(&gdev->dev);
 440
 441	/* Make sure this is terminated */
 442	handlereq.consumer_label[sizeof(handlereq.consumer_label)-1] = '\0';
 443	if (strlen(handlereq.consumer_label)) {
 444		lh->label = kstrdup(handlereq.consumer_label,
 445				    GFP_KERNEL);
 446		if (!lh->label) {
 447			ret = -ENOMEM;
 448			goto out_free_lh;
 449		}
 450	}
 451
 452	/* Request each GPIO */
 453	for (i = 0; i < handlereq.lines; i++) {
 454		u32 offset = handlereq.lineoffsets[i];
 455		u32 lflags = handlereq.flags;
 456		struct gpio_desc *desc;
 457
 458		if (offset >= gdev->ngpio) {
 459			ret = -EINVAL;
 460			goto out_free_descs;
 461		}
 462
 463		/* Return an error if a unknown flag is set */
 464		if (lflags & ~GPIOHANDLE_REQUEST_VALID_FLAGS) {
 465			ret = -EINVAL;
 466			goto out_free_descs;
 467		}
 468
 469		desc = &gdev->descs[offset];
 470		ret = gpiod_request(desc, lh->label);
 471		if (ret)
 472			goto out_free_descs;
 473		lh->descs[i] = desc;
 
 474
 475		if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
 476			set_bit(FLAG_ACTIVE_LOW, &desc->flags);
 477		if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN)
 478			set_bit(FLAG_OPEN_DRAIN, &desc->flags);
 479		if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
 480			set_bit(FLAG_OPEN_SOURCE, &desc->flags);
 481
 
 
 
 
 482		/*
 483		 * Lines have to be requested explicitly for input
 484		 * or output, else the line will be treated "as is".
 485		 */
 486		if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
 487			int val = !!handlereq.default_values[i];
 488
 489			ret = gpiod_direction_output(desc, val);
 490			if (ret)
 491				goto out_free_descs;
 492		} else if (lflags & GPIOHANDLE_REQUEST_INPUT) {
 493			ret = gpiod_direction_input(desc);
 494			if (ret)
 495				goto out_free_descs;
 496		}
 497		dev_dbg(&gdev->dev, "registered chardev handle for line %d\n",
 498			offset);
 499	}
 500	/* Let i point at the last handle */
 501	i--;
 502	lh->numdescs = handlereq.lines;
 503
 504	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
 505	if (fd < 0) {
 506		ret = fd;
 507		goto out_free_descs;
 508	}
 509
 510	file = anon_inode_getfile("gpio-linehandle",
 511				  &linehandle_fileops,
 512				  lh,
 513				  O_RDONLY | O_CLOEXEC);
 514	if (IS_ERR(file)) {
 515		ret = PTR_ERR(file);
 516		goto out_put_unused_fd;
 517	}
 518
 519	handlereq.fd = fd;
 520	if (copy_to_user(ip, &handlereq, sizeof(handlereq))) {
 521		/*
 522		 * fput() will trigger the release() callback, so do not go onto
 523		 * the regular error cleanup path here.
 524		 */
 525		fput(file);
 526		put_unused_fd(fd);
 527		return -EFAULT;
 528	}
 529
 530	fd_install(fd, file);
 531
 532	dev_dbg(&gdev->dev, "registered chardev handle for %d lines\n",
 533		lh->numdescs);
 534
 535	return 0;
 536
 537out_put_unused_fd:
 538	put_unused_fd(fd);
 539out_free_descs:
 540	for (; i >= 0; i--)
 541		gpiod_free(lh->descs[i]);
 542	kfree(lh->label);
 543out_free_lh:
 544	kfree(lh);
 545	put_device(&gdev->dev);
 546	return ret;
 547}
 548
 549/*
 550 * GPIO line event management
 551 */
 552
 553/**
 554 * struct lineevent_state - contains the state of a userspace event
 555 * @gdev: the GPIO device the event pertains to
 556 * @label: consumer label used to tag descriptors
 557 * @desc: the GPIO descriptor held by this event
 558 * @eflags: the event flags this line was requested with
 559 * @irq: the interrupt that trigger in response to events on this GPIO
 560 * @wait: wait queue that handles blocking reads of events
 561 * @events: KFIFO for the GPIO events
 562 * @read_lock: mutex lock to protect reads from colliding with adding
 563 * new events to the FIFO
 
 
 
 564 */
 565struct lineevent_state {
 566	struct gpio_device *gdev;
 567	const char *label;
 568	struct gpio_desc *desc;
 569	u32 eflags;
 570	int irq;
 571	wait_queue_head_t wait;
 572	DECLARE_KFIFO(events, struct gpioevent_data, 16);
 573	struct mutex read_lock;
 
 574};
 575
 576#define GPIOEVENT_REQUEST_VALID_FLAGS \
 577	(GPIOEVENT_REQUEST_RISING_EDGE | \
 578	GPIOEVENT_REQUEST_FALLING_EDGE)
 579
 580static unsigned int lineevent_poll(struct file *filep,
 581				   struct poll_table_struct *wait)
 582{
 583	struct lineevent_state *le = filep->private_data;
 584	unsigned int events = 0;
 585
 586	poll_wait(filep, &le->wait, wait);
 587
 588	if (!kfifo_is_empty(&le->events))
 589		events = POLLIN | POLLRDNORM;
 590
 591	return events;
 592}
 593
 594
 595static ssize_t lineevent_read(struct file *filep,
 596			      char __user *buf,
 597			      size_t count,
 598			      loff_t *f_ps)
 599{
 600	struct lineevent_state *le = filep->private_data;
 601	unsigned int copied;
 602	int ret;
 603
 604	if (count < sizeof(struct gpioevent_data))
 605		return -EINVAL;
 606
 607	do {
 608		if (kfifo_is_empty(&le->events)) {
 609			if (filep->f_flags & O_NONBLOCK)
 610				return -EAGAIN;
 611
 612			ret = wait_event_interruptible(le->wait,
 613					!kfifo_is_empty(&le->events));
 614			if (ret)
 615				return ret;
 616		}
 617
 618		if (mutex_lock_interruptible(&le->read_lock))
 619			return -ERESTARTSYS;
 620		ret = kfifo_to_user(&le->events, buf, count, &copied);
 621		mutex_unlock(&le->read_lock);
 622
 623		if (ret)
 624			return ret;
 625
 626		/*
 627		 * If we couldn't read anything from the fifo (a different
 628		 * thread might have been faster) we either return -EAGAIN if
 629		 * the file descriptor is non-blocking, otherwise we go back to
 630		 * sleep and wait for more data to arrive.
 631		 */
 632		if (copied == 0 && (filep->f_flags & O_NONBLOCK))
 633			return -EAGAIN;
 634
 635	} while (copied == 0);
 636
 637	return copied;
 638}
 639
 640static int lineevent_release(struct inode *inode, struct file *filep)
 641{
 642	struct lineevent_state *le = filep->private_data;
 643	struct gpio_device *gdev = le->gdev;
 644
 645	free_irq(le->irq, le);
 646	gpiod_free(le->desc);
 647	kfree(le->label);
 648	kfree(le);
 649	put_device(&gdev->dev);
 650	return 0;
 651}
 652
 653static long lineevent_ioctl(struct file *filep, unsigned int cmd,
 654			    unsigned long arg)
 655{
 656	struct lineevent_state *le = filep->private_data;
 657	void __user *ip = (void __user *)arg;
 658	struct gpiohandle_data ghd;
 659
 660	/*
 661	 * We can get the value for an event line but not set it,
 662	 * because it is input by definition.
 663	 */
 664	if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) {
 665		int val;
 666
 667		memset(&ghd, 0, sizeof(ghd));
 668
 669		val = gpiod_get_value_cansleep(le->desc);
 670		if (val < 0)
 671			return val;
 672		ghd.values[0] = val;
 673
 674		if (copy_to_user(ip, &ghd, sizeof(ghd)))
 675			return -EFAULT;
 676
 677		return 0;
 678	}
 679	return -EINVAL;
 680}
 681
 682#ifdef CONFIG_COMPAT
 683static long lineevent_ioctl_compat(struct file *filep, unsigned int cmd,
 684				   unsigned long arg)
 685{
 686	return lineevent_ioctl(filep, cmd, (unsigned long)compat_ptr(arg));
 687}
 688#endif
 689
 690static const struct file_operations lineevent_fileops = {
 691	.release = lineevent_release,
 692	.read = lineevent_read,
 693	.poll = lineevent_poll,
 694	.owner = THIS_MODULE,
 695	.llseek = noop_llseek,
 696	.unlocked_ioctl = lineevent_ioctl,
 697#ifdef CONFIG_COMPAT
 698	.compat_ioctl = lineevent_ioctl_compat,
 699#endif
 700};
 701
 702static irqreturn_t lineevent_irq_thread(int irq, void *p)
 703{
 704	struct lineevent_state *le = p;
 705	struct gpioevent_data ge;
 706	int ret;
 707
 708	ge.timestamp = ktime_get_real_ns();
 
 709
 710	if (le->eflags & GPIOEVENT_REQUEST_BOTH_EDGES) {
 711		int level = gpiod_get_value_cansleep(le->desc);
 712
 
 
 713		if (level)
 714			/* Emit low-to-high event */
 715			ge.id = GPIOEVENT_EVENT_RISING_EDGE;
 716		else
 717			/* Emit high-to-low event */
 718			ge.id = GPIOEVENT_EVENT_FALLING_EDGE;
 719	} else if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE) {
 720		/* Emit low-to-high event */
 721		ge.id = GPIOEVENT_EVENT_RISING_EDGE;
 722	} else if (le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE) {
 723		/* Emit high-to-low event */
 724		ge.id = GPIOEVENT_EVENT_FALLING_EDGE;
 725	} else {
 726		return IRQ_NONE;
 727	}
 728
 729	ret = kfifo_put(&le->events, ge);
 730	if (ret != 0)
 731		wake_up_poll(&le->wait, POLLIN);
 732
 733	return IRQ_HANDLED;
 734}
 735
 
 
 
 
 
 
 
 
 
 
 
 
 
 736static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 737{
 738	struct gpioevent_request eventreq;
 739	struct lineevent_state *le;
 740	struct gpio_desc *desc;
 741	struct file *file;
 742	u32 offset;
 743	u32 lflags;
 744	u32 eflags;
 745	int fd;
 746	int ret;
 747	int irqflags = 0;
 748
 749	if (copy_from_user(&eventreq, ip, sizeof(eventreq)))
 750		return -EFAULT;
 751
 752	le = kzalloc(sizeof(*le), GFP_KERNEL);
 753	if (!le)
 754		return -ENOMEM;
 755	le->gdev = gdev;
 756	get_device(&gdev->dev);
 757
 758	/* Make sure this is terminated */
 759	eventreq.consumer_label[sizeof(eventreq.consumer_label)-1] = '\0';
 760	if (strlen(eventreq.consumer_label)) {
 761		le->label = kstrdup(eventreq.consumer_label,
 762				    GFP_KERNEL);
 763		if (!le->label) {
 764			ret = -ENOMEM;
 765			goto out_free_le;
 766		}
 767	}
 768
 769	offset = eventreq.lineoffset;
 770	lflags = eventreq.handleflags;
 771	eflags = eventreq.eventflags;
 772
 773	if (offset >= gdev->ngpio) {
 774		ret = -EINVAL;
 775		goto out_free_label;
 776	}
 777
 778	/* Return an error if a unknown flag is set */
 779	if ((lflags & ~GPIOHANDLE_REQUEST_VALID_FLAGS) ||
 780	    (eflags & ~GPIOEVENT_REQUEST_VALID_FLAGS)) {
 781		ret = -EINVAL;
 782		goto out_free_label;
 783	}
 784
 785	/* This is just wrong: we don't look for events on output lines */
 786	if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
 787		ret = -EINVAL;
 788		goto out_free_label;
 789	}
 790
 791	desc = &gdev->descs[offset];
 792	ret = gpiod_request(desc, le->label);
 793	if (ret)
 794		goto out_free_desc;
 795	le->desc = desc;
 796	le->eflags = eflags;
 797
 798	if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
 799		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
 800	if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN)
 801		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
 802	if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
 803		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
 804
 805	ret = gpiod_direction_input(desc);
 806	if (ret)
 807		goto out_free_desc;
 808
 809	le->irq = gpiod_to_irq(desc);
 810	if (le->irq <= 0) {
 811		ret = -ENODEV;
 812		goto out_free_desc;
 813	}
 814
 815	if (eflags & GPIOEVENT_REQUEST_RISING_EDGE)
 816		irqflags |= IRQF_TRIGGER_RISING;
 817	if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE)
 818		irqflags |= IRQF_TRIGGER_FALLING;
 819	irqflags |= IRQF_ONESHOT;
 820	irqflags |= IRQF_SHARED;
 821
 822	INIT_KFIFO(le->events);
 823	init_waitqueue_head(&le->wait);
 824	mutex_init(&le->read_lock);
 825
 826	/* Request a thread to read the events */
 827	ret = request_threaded_irq(le->irq,
 828			NULL,
 829			lineevent_irq_thread,
 830			irqflags,
 831			le->label,
 832			le);
 833	if (ret)
 834		goto out_free_desc;
 835
 836	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
 837	if (fd < 0) {
 838		ret = fd;
 839		goto out_free_irq;
 840	}
 841
 842	file = anon_inode_getfile("gpio-event",
 843				  &lineevent_fileops,
 844				  le,
 845				  O_RDONLY | O_CLOEXEC);
 846	if (IS_ERR(file)) {
 847		ret = PTR_ERR(file);
 848		goto out_put_unused_fd;
 849	}
 850
 851	eventreq.fd = fd;
 852	if (copy_to_user(ip, &eventreq, sizeof(eventreq))) {
 853		/*
 854		 * fput() will trigger the release() callback, so do not go onto
 855		 * the regular error cleanup path here.
 856		 */
 857		fput(file);
 858		put_unused_fd(fd);
 859		return -EFAULT;
 860	}
 861
 862	fd_install(fd, file);
 863
 864	return 0;
 865
 866out_put_unused_fd:
 867	put_unused_fd(fd);
 868out_free_irq:
 869	free_irq(le->irq, le);
 870out_free_desc:
 871	gpiod_free(le->desc);
 872out_free_label:
 873	kfree(le->label);
 874out_free_le:
 875	kfree(le);
 876	put_device(&gdev->dev);
 877	return ret;
 878}
 879
 880/**
 881 * gpio_ioctl() - ioctl handler for the GPIO chardev
 882 */
 883static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 884{
 885	struct gpio_device *gdev = filp->private_data;
 886	struct gpio_chip *chip = gdev->chip;
 887	void __user *ip = (void __user *)arg;
 888
 889	/* We fail any subsequent ioctl():s when the chip is gone */
 890	if (!chip)
 891		return -ENODEV;
 892
 893	/* Fill in the struct and pass to userspace */
 894	if (cmd == GPIO_GET_CHIPINFO_IOCTL) {
 895		struct gpiochip_info chipinfo;
 896
 897		memset(&chipinfo, 0, sizeof(chipinfo));
 898
 899		strncpy(chipinfo.name, dev_name(&gdev->dev),
 900			sizeof(chipinfo.name));
 901		chipinfo.name[sizeof(chipinfo.name)-1] = '\0';
 902		strncpy(chipinfo.label, gdev->label,
 903			sizeof(chipinfo.label));
 904		chipinfo.label[sizeof(chipinfo.label)-1] = '\0';
 905		chipinfo.lines = gdev->ngpio;
 906		if (copy_to_user(ip, &chipinfo, sizeof(chipinfo)))
 907			return -EFAULT;
 908		return 0;
 909	} else if (cmd == GPIO_GET_LINEINFO_IOCTL) {
 910		struct gpioline_info lineinfo;
 911		struct gpio_desc *desc;
 912
 913		if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
 914			return -EFAULT;
 915		if (lineinfo.line_offset >= gdev->ngpio)
 916			return -EINVAL;
 917
 918		desc = &gdev->descs[lineinfo.line_offset];
 919		if (desc->name) {
 920			strncpy(lineinfo.name, desc->name,
 921				sizeof(lineinfo.name));
 922			lineinfo.name[sizeof(lineinfo.name)-1] = '\0';
 923		} else {
 924			lineinfo.name[0] = '\0';
 925		}
 926		if (desc->label) {
 927			strncpy(lineinfo.consumer, desc->label,
 928				sizeof(lineinfo.consumer));
 929			lineinfo.consumer[sizeof(lineinfo.consumer)-1] = '\0';
 930		} else {
 931			lineinfo.consumer[0] = '\0';
 932		}
 933
 934		/*
 935		 * Userspace only need to know that the kernel is using
 936		 * this GPIO so it can't use it.
 937		 */
 938		lineinfo.flags = 0;
 939		if (test_bit(FLAG_REQUESTED, &desc->flags) ||
 940		    test_bit(FLAG_IS_HOGGED, &desc->flags) ||
 941		    test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
 942		    test_bit(FLAG_EXPORT, &desc->flags) ||
 943		    test_bit(FLAG_SYSFS, &desc->flags))
 944			lineinfo.flags |= GPIOLINE_FLAG_KERNEL;
 945		if (test_bit(FLAG_IS_OUT, &desc->flags))
 946			lineinfo.flags |= GPIOLINE_FLAG_IS_OUT;
 947		if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
 948			lineinfo.flags |= GPIOLINE_FLAG_ACTIVE_LOW;
 949		if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
 950			lineinfo.flags |= GPIOLINE_FLAG_OPEN_DRAIN;
 951		if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
 952			lineinfo.flags |= GPIOLINE_FLAG_OPEN_SOURCE;
 953
 954		if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
 955			return -EFAULT;
 956		return 0;
 957	} else if (cmd == GPIO_GET_LINEHANDLE_IOCTL) {
 958		return linehandle_create(gdev, ip);
 959	} else if (cmd == GPIO_GET_LINEEVENT_IOCTL) {
 960		return lineevent_create(gdev, ip);
 961	}
 962	return -EINVAL;
 963}
 964
 965#ifdef CONFIG_COMPAT
 966static long gpio_ioctl_compat(struct file *filp, unsigned int cmd,
 967			      unsigned long arg)
 968{
 969	return gpio_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
 970}
 971#endif
 972
 973/**
 974 * gpio_chrdev_open() - open the chardev for ioctl operations
 975 * @inode: inode for this chardev
 976 * @filp: file struct for storing private data
 977 * Returns 0 on success
 978 */
 979static int gpio_chrdev_open(struct inode *inode, struct file *filp)
 980{
 981	struct gpio_device *gdev = container_of(inode->i_cdev,
 982					      struct gpio_device, chrdev);
 983
 984	/* Fail on open if the backing gpiochip is gone */
 985	if (!gdev || !gdev->chip)
 986		return -ENODEV;
 987	get_device(&gdev->dev);
 988	filp->private_data = gdev;
 989
 990	return nonseekable_open(inode, filp);
 991}
 992
 993/**
 994 * gpio_chrdev_release() - close chardev after ioctl operations
 995 * @inode: inode for this chardev
 996 * @filp: file struct for storing private data
 997 * Returns 0 on success
 998 */
 999static int gpio_chrdev_release(struct inode *inode, struct file *filp)
1000{
1001	struct gpio_device *gdev = container_of(inode->i_cdev,
1002					      struct gpio_device, chrdev);
1003
1004	if (!gdev)
1005		return -ENODEV;
1006	put_device(&gdev->dev);
1007	return 0;
1008}
1009
1010
1011static const struct file_operations gpio_fileops = {
1012	.release = gpio_chrdev_release,
1013	.open = gpio_chrdev_open,
1014	.owner = THIS_MODULE,
1015	.llseek = no_llseek,
1016	.unlocked_ioctl = gpio_ioctl,
1017#ifdef CONFIG_COMPAT
1018	.compat_ioctl = gpio_ioctl_compat,
1019#endif
1020};
1021
1022static void gpiodevice_release(struct device *dev)
1023{
1024	struct gpio_device *gdev = dev_get_drvdata(dev);
1025
1026	list_del(&gdev->list);
1027	ida_simple_remove(&gpio_ida, gdev->id);
1028	kfree(gdev->label);
1029	kfree(gdev->descs);
1030	kfree(gdev);
1031}
1032
1033static int gpiochip_setup_dev(struct gpio_device *gdev)
1034{
1035	int status;
1036
1037	cdev_init(&gdev->chrdev, &gpio_fileops);
1038	gdev->chrdev.owner = THIS_MODULE;
1039	gdev->chrdev.kobj.parent = &gdev->dev.kobj;
1040	gdev->dev.devt = MKDEV(MAJOR(gpio_devt), gdev->id);
1041	status = cdev_add(&gdev->chrdev, gdev->dev.devt, 1);
1042	if (status < 0)
1043		chip_warn(gdev->chip, "failed to add char device %d:%d\n",
1044			  MAJOR(gpio_devt), gdev->id);
1045	else
1046		chip_dbg(gdev->chip, "added GPIO chardev (%d:%d)\n",
1047			 MAJOR(gpio_devt), gdev->id);
1048	status = device_add(&gdev->dev);
1049	if (status)
1050		goto err_remove_chardev;
 
 
 
1051
1052	status = gpiochip_sysfs_register(gdev);
1053	if (status)
1054		goto err_remove_device;
1055
1056	/* From this point, the .release() function cleans up gpio_device */
1057	gdev->dev.release = gpiodevice_release;
1058	pr_debug("%s: registered GPIOs %d to %d on device: %s (%s)\n",
1059		 __func__, gdev->base, gdev->base + gdev->ngpio - 1,
1060		 dev_name(&gdev->dev), gdev->chip->label ? : "generic");
1061
1062	return 0;
1063
1064err_remove_device:
1065	device_del(&gdev->dev);
1066err_remove_chardev:
1067	cdev_del(&gdev->chrdev);
1068	return status;
1069}
1070
1071static void gpiochip_setup_devs(void)
1072{
1073	struct gpio_device *gdev;
1074	int err;
1075
1076	list_for_each_entry(gdev, &gpio_devices, list) {
1077		err = gpiochip_setup_dev(gdev);
1078		if (err)
1079			pr_err("%s: Failed to initialize gpio device (%d)\n",
1080			       dev_name(&gdev->dev), err);
1081	}
1082}
1083
1084/**
1085 * gpiochip_add_data() - register a gpio_chip
1086 * @chip: the chip to register, with chip->base initialized
1087 * Context: potentially before irqs will work
1088 *
1089 * Returns a negative errno if the chip can't be registered, such as
1090 * because the chip->base is invalid or already associated with a
1091 * different chip.  Otherwise it returns zero as a success code.
1092 *
1093 * When gpiochip_add_data() is called very early during boot, so that GPIOs
1094 * can be freely used, the chip->parent device must be registered before
1095 * the gpio framework's arch_initcall().  Otherwise sysfs initialization
1096 * for GPIOs will fail rudely.
1097 *
1098 * gpiochip_add_data() must only be called after gpiolib initialization,
1099 * ie after core_initcall().
1100 *
1101 * If chip->base is negative, this requests dynamic assignment of
1102 * a range of valid GPIOs.
1103 */
1104int gpiochip_add_data(struct gpio_chip *chip, void *data)
1105{
1106	unsigned long	flags;
1107	int		status = 0;
1108	unsigned	i;
1109	int		base = chip->base;
1110	struct gpio_device *gdev;
1111
1112	/*
1113	 * First: allocate and populate the internal stat container, and
1114	 * set up the struct device.
1115	 */
1116	gdev = kzalloc(sizeof(*gdev), GFP_KERNEL);
1117	if (!gdev)
1118		return -ENOMEM;
1119	gdev->dev.bus = &gpio_bus_type;
1120	gdev->chip = chip;
1121	chip->gpiodev = gdev;
1122	if (chip->parent) {
1123		gdev->dev.parent = chip->parent;
1124		gdev->dev.of_node = chip->parent->of_node;
1125	}
1126
1127#ifdef CONFIG_OF_GPIO
1128	/* If the gpiochip has an assigned OF node this takes precedence */
1129	if (chip->of_node)
1130		gdev->dev.of_node = chip->of_node;
1131#endif
1132
1133	gdev->id = ida_simple_get(&gpio_ida, 0, 0, GFP_KERNEL);
1134	if (gdev->id < 0) {
1135		status = gdev->id;
1136		goto err_free_gdev;
1137	}
1138	dev_set_name(&gdev->dev, "gpiochip%d", gdev->id);
1139	device_initialize(&gdev->dev);
1140	dev_set_drvdata(&gdev->dev, gdev);
1141	if (chip->parent && chip->parent->driver)
1142		gdev->owner = chip->parent->driver->owner;
1143	else if (chip->owner)
1144		/* TODO: remove chip->owner */
1145		gdev->owner = chip->owner;
1146	else
1147		gdev->owner = THIS_MODULE;
1148
1149	gdev->descs = kcalloc(chip->ngpio, sizeof(gdev->descs[0]), GFP_KERNEL);
1150	if (!gdev->descs) {
1151		status = -ENOMEM;
1152		goto err_free_gdev;
1153	}
1154
1155	if (chip->ngpio == 0) {
1156		chip_err(chip, "tried to insert a GPIO chip with zero lines\n");
1157		status = -EINVAL;
1158		goto err_free_descs;
1159	}
1160
1161	if (chip->label)
1162		gdev->label = kstrdup(chip->label, GFP_KERNEL);
1163	else
1164		gdev->label = kstrdup("unknown", GFP_KERNEL);
1165	if (!gdev->label) {
1166		status = -ENOMEM;
1167		goto err_free_descs;
1168	}
1169
1170	gdev->ngpio = chip->ngpio;
1171	gdev->data = data;
1172
1173	spin_lock_irqsave(&gpio_lock, flags);
1174
1175	/*
1176	 * TODO: this allocates a Linux GPIO number base in the global
1177	 * GPIO numberspace for this chip. In the long run we want to
1178	 * get *rid* of this numberspace and use only descriptors, but
1179	 * it may be a pipe dream. It will not happen before we get rid
1180	 * of the sysfs interface anyways.
1181	 */
1182	if (base < 0) {
1183		base = gpiochip_find_base(chip->ngpio);
1184		if (base < 0) {
1185			status = base;
1186			spin_unlock_irqrestore(&gpio_lock, flags);
1187			goto err_free_label;
1188		}
1189		/*
1190		 * TODO: it should not be necessary to reflect the assigned
1191		 * base outside of the GPIO subsystem. Go over drivers and
1192		 * see if anyone makes use of this, else drop this and assign
1193		 * a poison instead.
1194		 */
1195		chip->base = base;
1196	}
1197	gdev->base = base;
1198
1199	status = gpiodev_add_to_list(gdev);
1200	if (status) {
1201		spin_unlock_irqrestore(&gpio_lock, flags);
1202		goto err_free_label;
1203	}
1204
1205	spin_unlock_irqrestore(&gpio_lock, flags);
1206
1207	for (i = 0; i < chip->ngpio; i++) {
1208		struct gpio_desc *desc = &gdev->descs[i];
1209
1210		desc->gdev = gdev;
1211		/*
1212		 * REVISIT: most hardware initializes GPIOs as inputs
1213		 * (often with pullups enabled) so power usage is
1214		 * minimized. Linux code should set the gpio direction
1215		 * first thing; but until it does, and in case
1216		 * chip->get_direction is not set, we may expose the
1217		 * wrong direction in sysfs.
1218		 */
1219
1220		if (chip->get_direction) {
1221			/*
1222			 * If we have .get_direction, set up the initial
1223			 * direction flag from the hardware.
1224			 */
1225			int dir = chip->get_direction(chip, i);
1226
1227			if (!dir)
1228				set_bit(FLAG_IS_OUT, &desc->flags);
1229		} else if (!chip->direction_input) {
1230			/*
1231			 * If the chip lacks the .direction_input callback
1232			 * we logically assume all lines are outputs.
1233			 */
1234			set_bit(FLAG_IS_OUT, &desc->flags);
1235		}
1236	}
1237
1238#ifdef CONFIG_PINCTRL
1239	INIT_LIST_HEAD(&gdev->pin_ranges);
1240#endif
1241
1242	status = gpiochip_set_desc_names(chip);
1243	if (status)
1244		goto err_remove_from_list;
1245
1246	status = gpiochip_irqchip_init_valid_mask(chip);
1247	if (status)
1248		goto err_remove_from_list;
1249
 
 
 
 
 
 
 
 
1250	status = of_gpiochip_add(chip);
1251	if (status)
1252		goto err_remove_chip;
1253
1254	acpi_gpiochip_add(chip);
1255
1256	/*
1257	 * By first adding the chardev, and then adding the device,
1258	 * we get a device node entry in sysfs under
1259	 * /sys/bus/gpio/devices/gpiochipN/dev that can be used for
1260	 * coldplug of device nodes and other udev business.
1261	 * We can do this only if gpiolib has been initialized.
1262	 * Otherwise, defer until later.
1263	 */
1264	if (gpiolib_initialized) {
1265		status = gpiochip_setup_dev(gdev);
1266		if (status)
1267			goto err_remove_chip;
1268	}
1269	return 0;
1270
1271err_remove_chip:
1272	acpi_gpiochip_remove(chip);
1273	gpiochip_free_hogs(chip);
1274	of_gpiochip_remove(chip);
 
 
1275	gpiochip_irqchip_free_valid_mask(chip);
1276err_remove_from_list:
1277	spin_lock_irqsave(&gpio_lock, flags);
1278	list_del(&gdev->list);
1279	spin_unlock_irqrestore(&gpio_lock, flags);
1280err_free_label:
1281	kfree(gdev->label);
1282err_free_descs:
1283	kfree(gdev->descs);
1284err_free_gdev:
1285	ida_simple_remove(&gpio_ida, gdev->id);
1286	/* failures here can mean systems won't boot... */
1287	pr_err("%s: GPIOs %d..%d (%s) failed to register\n", __func__,
1288	       gdev->base, gdev->base + gdev->ngpio - 1,
1289	       chip->label ? : "generic");
1290	kfree(gdev);
1291	return status;
1292}
1293EXPORT_SYMBOL_GPL(gpiochip_add_data);
1294
1295/**
1296 * gpiochip_get_data() - get per-subdriver data for the chip
 
 
 
 
1297 */
1298void *gpiochip_get_data(struct gpio_chip *chip)
1299{
1300	return chip->gpiodev->data;
1301}
1302EXPORT_SYMBOL_GPL(gpiochip_get_data);
1303
1304/**
1305 * gpiochip_remove() - unregister a gpio_chip
1306 * @chip: the chip to unregister
1307 *
1308 * A gpio_chip with any GPIOs still requested may not be removed.
1309 */
1310void gpiochip_remove(struct gpio_chip *chip)
1311{
1312	struct gpio_device *gdev = chip->gpiodev;
1313	struct gpio_desc *desc;
1314	unsigned long	flags;
1315	unsigned	i;
1316	bool		requested = false;
1317
1318	/* FIXME: should the legacy sysfs handling be moved to gpio_device? */
1319	gpiochip_sysfs_unregister(gdev);
1320	gpiochip_free_hogs(chip);
1321	/* Numb the device, cancelling all outstanding operations */
1322	gdev->chip = NULL;
1323	gpiochip_irqchip_remove(chip);
1324	acpi_gpiochip_remove(chip);
1325	gpiochip_remove_pin_ranges(chip);
1326	of_gpiochip_remove(chip);
 
1327	/*
1328	 * We accept no more calls into the driver from this point, so
1329	 * NULL the driver data pointer
1330	 */
1331	gdev->data = NULL;
1332
1333	spin_lock_irqsave(&gpio_lock, flags);
1334	for (i = 0; i < gdev->ngpio; i++) {
1335		desc = &gdev->descs[i];
1336		if (test_bit(FLAG_REQUESTED, &desc->flags))
1337			requested = true;
1338	}
1339	spin_unlock_irqrestore(&gpio_lock, flags);
1340
1341	if (requested)
1342		dev_crit(&gdev->dev,
1343			 "REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n");
1344
1345	/*
1346	 * The gpiochip side puts its use of the device to rest here:
1347	 * if there are no userspace clients, the chardev and device will
1348	 * be removed, else it will be dangling until the last user is
1349	 * gone.
1350	 */
1351	cdev_del(&gdev->chrdev);
1352	device_del(&gdev->dev);
1353	put_device(&gdev->dev);
1354}
1355EXPORT_SYMBOL_GPL(gpiochip_remove);
1356
1357static void devm_gpio_chip_release(struct device *dev, void *res)
1358{
1359	struct gpio_chip *chip = *(struct gpio_chip **)res;
1360
1361	gpiochip_remove(chip);
1362}
1363
1364static int devm_gpio_chip_match(struct device *dev, void *res, void *data)
1365
1366{
1367	struct gpio_chip **r = res;
1368
1369	if (!r || !*r) {
1370		WARN_ON(!r || !*r);
1371		return 0;
1372	}
1373
1374	return *r == data;
1375}
1376
1377/**
1378 * devm_gpiochip_add_data() - Resource manager piochip_add_data()
1379 * @dev: the device pointer on which irq_chip belongs to.
1380 * @chip: the chip to register, with chip->base initialized
1381 * Context: potentially before irqs will work
1382 *
1383 * Returns a negative errno if the chip can't be registered, such as
1384 * because the chip->base is invalid or already associated with a
1385 * different chip.  Otherwise it returns zero as a success code.
1386 *
1387 * The gpio chip automatically be released when the device is unbound.
 
 
 
 
 
1388 */
1389int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *chip,
1390			   void *data)
1391{
1392	struct gpio_chip **ptr;
1393	int ret;
1394
1395	ptr = devres_alloc(devm_gpio_chip_release, sizeof(*ptr),
1396			     GFP_KERNEL);
1397	if (!ptr)
1398		return -ENOMEM;
1399
1400	ret = gpiochip_add_data(chip, data);
1401	if (ret < 0) {
1402		devres_free(ptr);
1403		return ret;
1404	}
1405
1406	*ptr = chip;
1407	devres_add(dev, ptr);
1408
1409	return 0;
1410}
1411EXPORT_SYMBOL_GPL(devm_gpiochip_add_data);
1412
1413/**
1414 * devm_gpiochip_remove() - Resource manager of gpiochip_remove()
1415 * @dev: device for which which resource was allocated
1416 * @chip: the chip to remove
1417 *
1418 * A gpio_chip with any GPIOs still requested may not be removed.
1419 */
1420void devm_gpiochip_remove(struct device *dev, struct gpio_chip *chip)
1421{
1422	int ret;
1423
1424	ret = devres_release(dev, devm_gpio_chip_release,
1425			     devm_gpio_chip_match, chip);
1426	if (!ret)
1427		WARN_ON(ret);
1428}
1429EXPORT_SYMBOL_GPL(devm_gpiochip_remove);
1430
1431/**
1432 * gpiochip_find() - iterator for locating a specific gpio_chip
1433 * @data: data to pass to match function
1434 * @callback: Callback function to check gpio_chip
1435 *
1436 * Similar to bus_find_device.  It returns a reference to a gpio_chip as
1437 * determined by a user supplied @match callback.  The callback should return
1438 * 0 if the device doesn't match and non-zero if it does.  If the callback is
1439 * non-zero, this function will return to the caller and not iterate over any
1440 * more gpio_chips.
1441 */
1442struct gpio_chip *gpiochip_find(void *data,
1443				int (*match)(struct gpio_chip *chip,
1444					     void *data))
1445{
1446	struct gpio_device *gdev;
1447	struct gpio_chip *chip = NULL;
1448	unsigned long flags;
1449
1450	spin_lock_irqsave(&gpio_lock, flags);
1451	list_for_each_entry(gdev, &gpio_devices, list)
1452		if (gdev->chip && match(gdev->chip, data)) {
1453			chip = gdev->chip;
1454			break;
1455		}
1456
1457	spin_unlock_irqrestore(&gpio_lock, flags);
1458
1459	return chip;
1460}
1461EXPORT_SYMBOL_GPL(gpiochip_find);
1462
1463static int gpiochip_match_name(struct gpio_chip *chip, void *data)
1464{
1465	const char *name = data;
1466
1467	return !strcmp(chip->label, name);
1468}
1469
1470static struct gpio_chip *find_chip_by_name(const char *name)
1471{
1472	return gpiochip_find((void *)name, gpiochip_match_name);
1473}
1474
1475#ifdef CONFIG_GPIOLIB_IRQCHIP
1476
1477/*
1478 * The following is irqchip helper code for gpiochips.
1479 */
1480
1481static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip)
1482{
1483	int i;
1484
1485	if (!gpiochip->irq_need_valid_mask)
1486		return 0;
1487
1488	gpiochip->irq_valid_mask = kcalloc(BITS_TO_LONGS(gpiochip->ngpio),
1489					   sizeof(long), GFP_KERNEL);
1490	if (!gpiochip->irq_valid_mask)
1491		return -ENOMEM;
1492
1493	/* Assume by default all GPIOs are valid */
1494	for (i = 0; i < gpiochip->ngpio; i++)
1495		set_bit(i, gpiochip->irq_valid_mask);
1496
1497	return 0;
1498}
1499
1500static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
1501{
1502	kfree(gpiochip->irq_valid_mask);
1503	gpiochip->irq_valid_mask = NULL;
1504}
1505
1506static bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
1507				       unsigned int offset)
1508{
 
 
1509	/* No mask means all valid */
1510	if (likely(!gpiochip->irq_valid_mask))
1511		return true;
1512	return test_bit(offset, gpiochip->irq_valid_mask);
1513}
 
1514
1515/**
1516 * gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip
1517 * @gpiochip: the gpiochip to set the irqchip chain to
1518 * @irqchip: the irqchip to chain to the gpiochip
1519 * @parent_irq: the irq number corresponding to the parent IRQ for this
1520 * chained irqchip
1521 * @parent_handler: the parent interrupt handler for the accumulated IRQ
1522 * coming out of the gpiochip. If the interrupt is nested rather than
1523 * cascaded, pass NULL in this handler argument
1524 */
1525static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gpiochip,
1526					  struct irq_chip *irqchip,
1527					  int parent_irq,
1528					  irq_flow_handler_t parent_handler)
1529{
1530	unsigned int offset;
1531
1532	if (!gpiochip->irqdomain) {
1533		chip_err(gpiochip, "called %s before setting up irqchip\n",
1534			 __func__);
1535		return;
1536	}
1537
1538	if (parent_handler) {
1539		if (gpiochip->can_sleep) {
1540			chip_err(gpiochip,
1541				 "you cannot have chained interrupts on a "
1542				 "chip that may sleep\n");
1543			return;
1544		}
1545		/*
1546		 * The parent irqchip is already using the chip_data for this
1547		 * irqchip, so our callbacks simply use the handler_data.
1548		 */
1549		irq_set_chained_handler_and_data(parent_irq, parent_handler,
1550						 gpiochip);
1551
1552		gpiochip->irq_chained_parent = parent_irq;
 
1553	}
1554
1555	/* Set the parent IRQ for all affected IRQs */
1556	for (offset = 0; offset < gpiochip->ngpio; offset++) {
1557		if (!gpiochip_irqchip_irq_valid(gpiochip, offset))
1558			continue;
1559		irq_set_parent(irq_find_mapping(gpiochip->irqdomain, offset),
1560			       parent_irq);
1561	}
1562}
1563
1564/**
1565 * gpiochip_set_chained_irqchip() - connects a chained irqchip to a gpiochip
1566 * @gpiochip: the gpiochip to set the irqchip chain to
1567 * @irqchip: the irqchip to chain to the gpiochip
1568 * @parent_irq: the irq number corresponding to the parent IRQ for this
1569 * chained irqchip
1570 * @parent_handler: the parent interrupt handler for the accumulated IRQ
1571 * coming out of the gpiochip. If the interrupt is nested rather than
1572 * cascaded, pass NULL in this handler argument
1573 */
1574void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
1575				  struct irq_chip *irqchip,
1576				  int parent_irq,
1577				  irq_flow_handler_t parent_handler)
1578{
 
 
 
 
 
1579	gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq,
1580				      parent_handler);
1581}
1582EXPORT_SYMBOL_GPL(gpiochip_set_chained_irqchip);
1583
1584/**
1585 * gpiochip_set_nested_irqchip() - connects a nested irqchip to a gpiochip
1586 * @gpiochip: the gpiochip to set the irqchip nested handler to
1587 * @irqchip: the irqchip to nest to the gpiochip
1588 * @parent_irq: the irq number corresponding to the parent IRQ for this
1589 * nested irqchip
1590 */
1591void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip,
1592				 struct irq_chip *irqchip,
1593				 int parent_irq)
1594{
1595	if (!gpiochip->irq_nested) {
1596		chip_err(gpiochip, "tried to nest a chained gpiochip\n");
1597		return;
1598	}
1599	gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq,
1600				      NULL);
1601}
1602EXPORT_SYMBOL_GPL(gpiochip_set_nested_irqchip);
1603
1604/**
1605 * gpiochip_irq_map() - maps an IRQ into a GPIO irqchip
1606 * @d: the irqdomain used by this irqchip
1607 * @irq: the global irq number used by this GPIO irqchip irq
1608 * @hwirq: the local IRQ/GPIO line offset on this gpiochip
1609 *
1610 * This function will set up the mapping for a certain IRQ line on a
1611 * gpiochip by assigning the gpiochip as chip data, and using the irqchip
1612 * stored inside the gpiochip.
1613 */
1614static int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
1615			    irq_hw_number_t hwirq)
1616{
1617	struct gpio_chip *chip = d->host_data;
 
 
 
 
1618
1619	irq_set_chip_data(irq, chip);
1620	/*
1621	 * This lock class tells lockdep that GPIO irqs are in a different
1622	 * category than their parents, so it won't report false recursion.
1623	 */
1624	irq_set_lockdep_class(irq, chip->lock_key);
1625	irq_set_chip_and_handler(irq, chip->irqchip, chip->irq_handler);
1626	/* Chips that use nested thread handlers have them marked */
1627	if (chip->irq_nested)
1628		irq_set_nested_thread(irq, 1);
1629	irq_set_noprobe(irq);
1630
 
 
 
 
 
 
 
 
1631	/*
1632	 * No set-up of the hardware will happen if IRQ_TYPE_NONE
1633	 * is passed as default type.
1634	 */
1635	if (chip->irq_default_type != IRQ_TYPE_NONE)
1636		irq_set_irq_type(irq, chip->irq_default_type);
1637
1638	return 0;
1639}
 
1640
1641static void gpiochip_irq_unmap(struct irq_domain *d, unsigned int irq)
1642{
1643	struct gpio_chip *chip = d->host_data;
1644
1645	if (chip->irq_nested)
1646		irq_set_nested_thread(irq, 0);
1647	irq_set_chip_and_handler(irq, NULL, NULL);
1648	irq_set_chip_data(irq, NULL);
1649}
 
1650
1651static const struct irq_domain_ops gpiochip_domain_ops = {
1652	.map	= gpiochip_irq_map,
1653	.unmap	= gpiochip_irq_unmap,
1654	/* Virtually all GPIO irqchips are twocell:ed */
1655	.xlate	= irq_domain_xlate_twocell,
1656};
1657
1658static int gpiochip_irq_reqres(struct irq_data *d)
1659{
1660	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
1661
1662	if (!try_module_get(chip->gpiodev->owner))
1663		return -ENODEV;
1664
1665	if (gpiochip_lock_as_irq(chip, d->hwirq)) {
1666		chip_err(chip,
1667			"unable to lock HW IRQ %lu for IRQ\n",
1668			d->hwirq);
1669		module_put(chip->gpiodev->owner);
1670		return -EINVAL;
1671	}
1672	return 0;
1673}
1674
1675static void gpiochip_irq_relres(struct irq_data *d)
1676{
1677	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
1678
1679	gpiochip_unlock_as_irq(chip, d->hwirq);
1680	module_put(chip->gpiodev->owner);
1681}
1682
1683static int gpiochip_to_irq(struct gpio_chip *chip, unsigned offset)
1684{
1685	return irq_find_mapping(chip->irqdomain, offset);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1686}
1687
1688/**
1689 * gpiochip_irqchip_remove() - removes an irqchip added to a gpiochip
1690 * @gpiochip: the gpiochip to remove the irqchip from
1691 *
1692 * This is called only from gpiochip_remove()
1693 */
1694static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
1695{
1696	unsigned int offset;
1697
1698	acpi_gpiochip_free_interrupts(gpiochip);
1699
1700	if (gpiochip->irq_chained_parent) {
1701		irq_set_chained_handler(gpiochip->irq_chained_parent, NULL);
1702		irq_set_handler_data(gpiochip->irq_chained_parent, NULL);
 
 
 
 
1703	}
1704
1705	/* Remove all IRQ mappings and delete the domain */
1706	if (gpiochip->irqdomain) {
 
 
1707		for (offset = 0; offset < gpiochip->ngpio; offset++) {
1708			if (!gpiochip_irqchip_irq_valid(gpiochip, offset))
1709				continue;
1710			irq_dispose_mapping(
1711				irq_find_mapping(gpiochip->irqdomain, offset));
 
1712		}
1713		irq_domain_remove(gpiochip->irqdomain);
 
1714	}
1715
1716	if (gpiochip->irqchip) {
1717		gpiochip->irqchip->irq_request_resources = NULL;
1718		gpiochip->irqchip->irq_release_resources = NULL;
1719		gpiochip->irqchip = NULL;
1720	}
1721
1722	gpiochip_irqchip_free_valid_mask(gpiochip);
1723}
1724
1725/**
1726 * gpiochip_irqchip_add_key() - adds an irqchip to a gpiochip
1727 * @gpiochip: the gpiochip to add the irqchip to
1728 * @irqchip: the irqchip to add to the gpiochip
1729 * @first_irq: if not dynamically assigned, the base (first) IRQ to
1730 * allocate gpiochip irqs from
1731 * @handler: the irq handler to use (often a predefined irq core function)
1732 * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE
1733 * to have the core avoid setting up any default type in the hardware.
1734 * @nested: whether this is a nested irqchip calling handle_nested_irq()
1735 * in its IRQ handler
1736 * @lock_key: lockdep class
1737 *
1738 * This function closely associates a certain irqchip with a certain
1739 * gpiochip, providing an irq domain to translate the local IRQs to
1740 * global irqs in the gpiolib core, and making sure that the gpiochip
1741 * is passed as chip data to all related functions. Driver callbacks
1742 * need to use gpiochip_get_data() to get their local state containers back
1743 * from the gpiochip passed as chip data. An irqdomain will be stored
1744 * in the gpiochip that shall be used by the driver to handle IRQ number
1745 * translation. The gpiochip will need to be initialized and registered
1746 * before calling this function.
1747 *
1748 * This function will handle two cell:ed simple IRQs and assumes all
1749 * the pins on the gpiochip can generate a unique IRQ. Everything else
1750 * need to be open coded.
1751 */
1752int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip,
1753			     struct irq_chip *irqchip,
1754			     unsigned int first_irq,
1755			     irq_flow_handler_t handler,
1756			     unsigned int type,
1757			     bool nested,
1758			     struct lock_class_key *lock_key)
 
1759{
1760	struct device_node *of_node;
1761	bool irq_base_set = false;
1762	unsigned int offset;
1763	unsigned irq_base = 0;
1764
1765	if (!gpiochip || !irqchip)
1766		return -EINVAL;
1767
1768	if (!gpiochip->parent) {
1769		pr_err("missing gpiochip .dev parent pointer\n");
1770		return -EINVAL;
1771	}
1772	gpiochip->irq_nested = nested;
1773	of_node = gpiochip->parent->of_node;
1774#ifdef CONFIG_OF_GPIO
1775	/*
1776	 * If the gpiochip has an assigned OF node this takes precedence
1777	 * FIXME: get rid of this and use gpiochip->parent->of_node
1778	 * everywhere
1779	 */
1780	if (gpiochip->of_node)
1781		of_node = gpiochip->of_node;
1782#endif
1783	/*
1784	 * Specifying a default trigger is a terrible idea if DT or ACPI is
1785	 * used to configure the interrupts, as you may end-up with
1786	 * conflicting triggers. Tell the user, and reset to NONE.
1787	 */
1788	if (WARN(of_node && type != IRQ_TYPE_NONE,
1789		 "%s: Ignoring %d default trigger\n", of_node->full_name, type))
1790		type = IRQ_TYPE_NONE;
1791	if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) {
1792		acpi_handle_warn(ACPI_HANDLE(gpiochip->parent),
1793				 "Ignoring %d default trigger\n", type);
1794		type = IRQ_TYPE_NONE;
1795	}
1796
1797	gpiochip->irqchip = irqchip;
1798	gpiochip->irq_handler = handler;
1799	gpiochip->irq_default_type = type;
1800	gpiochip->to_irq = gpiochip_to_irq;
1801	gpiochip->lock_key = lock_key;
1802	gpiochip->irqdomain = irq_domain_add_simple(of_node,
 
1803					gpiochip->ngpio, first_irq,
1804					&gpiochip_domain_ops, gpiochip);
1805	if (!gpiochip->irqdomain) {
1806		gpiochip->irqchip = NULL;
1807		return -EINVAL;
1808	}
1809
1810	/*
1811	 * It is possible for a driver to override this, but only if the
1812	 * alternative functions are both implemented.
1813	 */
1814	if (!irqchip->irq_request_resources &&
1815	    !irqchip->irq_release_resources) {
1816		irqchip->irq_request_resources = gpiochip_irq_reqres;
1817		irqchip->irq_release_resources = gpiochip_irq_relres;
1818	}
1819
1820	/*
1821	 * Prepare the mapping since the irqchip shall be orthogonal to
1822	 * any gpiochip calls. If the first_irq was zero, this is
1823	 * necessary to allocate descriptors for all IRQs.
1824	 */
1825	for (offset = 0; offset < gpiochip->ngpio; offset++) {
1826		if (!gpiochip_irqchip_irq_valid(gpiochip, offset))
1827			continue;
1828		irq_base = irq_create_mapping(gpiochip->irqdomain, offset);
1829		if (!irq_base_set) {
1830			/*
1831			 * Store the base into the gpiochip to be used when
1832			 * unmapping the irqs.
1833			 */
1834			gpiochip->irq_base = irq_base;
1835			irq_base_set = true;
1836		}
1837	}
1838
1839	acpi_gpiochip_request_interrupts(gpiochip);
1840
1841	return 0;
1842}
1843EXPORT_SYMBOL_GPL(gpiochip_irqchip_add_key);
1844
1845#else /* CONFIG_GPIOLIB_IRQCHIP */
1846
 
 
 
 
 
 
 
1847static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) {}
1848static inline int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip)
1849{
1850	return 0;
1851}
1852static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
1853{ }
1854
1855#endif /* CONFIG_GPIOLIB_IRQCHIP */
1856
1857/**
1858 * gpiochip_generic_request() - request the gpio function for a pin
1859 * @chip: the gpiochip owning the GPIO
1860 * @offset: the offset of the GPIO to request for GPIO function
1861 */
1862int gpiochip_generic_request(struct gpio_chip *chip, unsigned offset)
1863{
1864	return pinctrl_request_gpio(chip->gpiodev->base + offset);
1865}
1866EXPORT_SYMBOL_GPL(gpiochip_generic_request);
1867
1868/**
1869 * gpiochip_generic_free() - free the gpio function from a pin
1870 * @chip: the gpiochip to request the gpio function for
1871 * @offset: the offset of the GPIO to free from GPIO function
1872 */
1873void gpiochip_generic_free(struct gpio_chip *chip, unsigned offset)
1874{
1875	pinctrl_free_gpio(chip->gpiodev->base + offset);
1876}
1877EXPORT_SYMBOL_GPL(gpiochip_generic_free);
1878
 
 
 
 
 
 
 
 
 
 
 
 
 
1879#ifdef CONFIG_PINCTRL
1880
1881/**
1882 * gpiochip_add_pingroup_range() - add a range for GPIO <-> pin mapping
1883 * @chip: the gpiochip to add the range for
1884 * @pctldev: the pin controller to map to
1885 * @gpio_offset: the start offset in the current gpio_chip number space
1886 * @pin_group: name of the pin group inside the pin controller
1887 */
1888int gpiochip_add_pingroup_range(struct gpio_chip *chip,
1889			struct pinctrl_dev *pctldev,
1890			unsigned int gpio_offset, const char *pin_group)
1891{
1892	struct gpio_pin_range *pin_range;
1893	struct gpio_device *gdev = chip->gpiodev;
1894	int ret;
1895
1896	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
1897	if (!pin_range) {
1898		chip_err(chip, "failed to allocate pin ranges\n");
1899		return -ENOMEM;
1900	}
1901
1902	/* Use local offset as range ID */
1903	pin_range->range.id = gpio_offset;
1904	pin_range->range.gc = chip;
1905	pin_range->range.name = chip->label;
1906	pin_range->range.base = gdev->base + gpio_offset;
1907	pin_range->pctldev = pctldev;
1908
1909	ret = pinctrl_get_group_pins(pctldev, pin_group,
1910					&pin_range->range.pins,
1911					&pin_range->range.npins);
1912	if (ret < 0) {
1913		kfree(pin_range);
1914		return ret;
1915	}
1916
1917	pinctrl_add_gpio_range(pctldev, &pin_range->range);
1918
1919	chip_dbg(chip, "created GPIO range %d->%d ==> %s PINGRP %s\n",
1920		 gpio_offset, gpio_offset + pin_range->range.npins - 1,
1921		 pinctrl_dev_get_devname(pctldev), pin_group);
1922
1923	list_add_tail(&pin_range->node, &gdev->pin_ranges);
1924
1925	return 0;
1926}
1927EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
1928
1929/**
1930 * gpiochip_add_pin_range() - add a range for GPIO <-> pin mapping
1931 * @chip: the gpiochip to add the range for
1932 * @pinctrl_name: the dev_name() of the pin controller to map to
1933 * @gpio_offset: the start offset in the current gpio_chip number space
1934 * @pin_offset: the start offset in the pin controller number space
1935 * @npins: the number of pins from the offset of each pin space (GPIO and
1936 *	pin controller) to accumulate in this range
 
 
 
1937 */
1938int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
1939			   unsigned int gpio_offset, unsigned int pin_offset,
1940			   unsigned int npins)
1941{
1942	struct gpio_pin_range *pin_range;
1943	struct gpio_device *gdev = chip->gpiodev;
1944	int ret;
1945
1946	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
1947	if (!pin_range) {
1948		chip_err(chip, "failed to allocate pin ranges\n");
1949		return -ENOMEM;
1950	}
1951
1952	/* Use local offset as range ID */
1953	pin_range->range.id = gpio_offset;
1954	pin_range->range.gc = chip;
1955	pin_range->range.name = chip->label;
1956	pin_range->range.base = gdev->base + gpio_offset;
1957	pin_range->range.pin_base = pin_offset;
1958	pin_range->range.npins = npins;
1959	pin_range->pctldev = pinctrl_find_and_add_gpio_range(pinctl_name,
1960			&pin_range->range);
1961	if (IS_ERR(pin_range->pctldev)) {
1962		ret = PTR_ERR(pin_range->pctldev);
1963		chip_err(chip, "could not create pin range\n");
1964		kfree(pin_range);
1965		return ret;
1966	}
1967	chip_dbg(chip, "created GPIO range %d->%d ==> %s PIN %d->%d\n",
1968		 gpio_offset, gpio_offset + npins - 1,
1969		 pinctl_name,
1970		 pin_offset, pin_offset + npins - 1);
1971
1972	list_add_tail(&pin_range->node, &gdev->pin_ranges);
1973
1974	return 0;
1975}
1976EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
1977
1978/**
1979 * gpiochip_remove_pin_ranges() - remove all the GPIO <-> pin mappings
1980 * @chip: the chip to remove all the mappings for
1981 */
1982void gpiochip_remove_pin_ranges(struct gpio_chip *chip)
1983{
1984	struct gpio_pin_range *pin_range, *tmp;
1985	struct gpio_device *gdev = chip->gpiodev;
1986
1987	list_for_each_entry_safe(pin_range, tmp, &gdev->pin_ranges, node) {
1988		list_del(&pin_range->node);
1989		pinctrl_remove_gpio_range(pin_range->pctldev,
1990				&pin_range->range);
1991		kfree(pin_range);
1992	}
1993}
1994EXPORT_SYMBOL_GPL(gpiochip_remove_pin_ranges);
1995
1996#endif /* CONFIG_PINCTRL */
1997
1998/* These "optional" allocation calls help prevent drivers from stomping
1999 * on each other, and help provide better diagnostics in debugfs.
2000 * They're called even less than the "set direction" calls.
2001 */
2002static int __gpiod_request(struct gpio_desc *desc, const char *label)
2003{
2004	struct gpio_chip	*chip = desc->gdev->chip;
2005	int			status;
2006	unsigned long		flags;
2007
2008	spin_lock_irqsave(&gpio_lock, flags);
2009
2010	/* NOTE:  gpio_request() can be called in early boot,
2011	 * before IRQs are enabled, for non-sleeping (SOC) GPIOs.
2012	 */
2013
2014	if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
2015		desc_set_label(desc, label ? : "?");
2016		status = 0;
2017	} else {
2018		status = -EBUSY;
2019		goto done;
2020	}
2021
2022	if (chip->request) {
2023		/* chip->request may sleep */
2024		spin_unlock_irqrestore(&gpio_lock, flags);
2025		status = chip->request(chip, gpio_chip_hwgpio(desc));
2026		spin_lock_irqsave(&gpio_lock, flags);
2027
2028		if (status < 0) {
2029			desc_set_label(desc, NULL);
2030			clear_bit(FLAG_REQUESTED, &desc->flags);
2031			goto done;
2032		}
2033	}
2034	if (chip->get_direction) {
2035		/* chip->get_direction may sleep */
2036		spin_unlock_irqrestore(&gpio_lock, flags);
2037		gpiod_get_direction(desc);
2038		spin_lock_irqsave(&gpio_lock, flags);
2039	}
2040done:
2041	spin_unlock_irqrestore(&gpio_lock, flags);
2042	return status;
2043}
2044
2045/*
2046 * This descriptor validation needs to be inserted verbatim into each
2047 * function taking a descriptor, so we need to use a preprocessor
2048 * macro to avoid endless duplication. If the desc is NULL it is an
2049 * optional GPIO and calls should just bail out.
2050 */
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2051#define VALIDATE_DESC(desc) do { \
2052	if (!desc) \
2053		return 0; \
2054	if (IS_ERR(desc)) {						\
2055		pr_warn("%s: invalid GPIO (errorpointer)\n", __func__); \
2056		return PTR_ERR(desc); \
2057	} \
2058	if (!desc->gdev) { \
2059		pr_warn("%s: invalid GPIO (no device)\n", __func__); \
2060		return -EINVAL; \
2061	} \
2062	if ( !desc->gdev->chip ) { \
2063		dev_warn(&desc->gdev->dev, \
2064			 "%s: backing chip is gone\n", __func__); \
2065		return 0; \
2066	} } while (0)
2067
2068#define VALIDATE_DESC_VOID(desc) do { \
2069	if (!desc) \
2070		return; \
2071	if (IS_ERR(desc)) {						\
2072		pr_warn("%s: invalid GPIO (errorpointer)\n", __func__); \
2073		return; \
2074	} \
2075	if (!desc->gdev) { \
2076		pr_warn("%s: invalid GPIO (no device)\n", __func__); \
2077		return; \
2078	} \
2079	if (!desc->gdev->chip) { \
2080		dev_warn(&desc->gdev->dev, \
2081			 "%s: backing chip is gone\n", __func__); \
2082		return; \
2083	} } while (0)
2084
2085
2086int gpiod_request(struct gpio_desc *desc, const char *label)
2087{
2088	int status = -EPROBE_DEFER;
2089	struct gpio_device *gdev;
2090
2091	VALIDATE_DESC(desc);
2092	gdev = desc->gdev;
2093
2094	if (try_module_get(gdev->owner)) {
2095		status = __gpiod_request(desc, label);
2096		if (status < 0)
2097			module_put(gdev->owner);
2098		else
2099			get_device(&gdev->dev);
2100	}
2101
2102	if (status)
2103		gpiod_dbg(desc, "%s: status %d\n", __func__, status);
2104
2105	return status;
2106}
2107
2108static bool __gpiod_free(struct gpio_desc *desc)
2109{
2110	bool			ret = false;
2111	unsigned long		flags;
2112	struct gpio_chip	*chip;
2113
2114	might_sleep();
2115
2116	gpiod_unexport(desc);
2117
2118	spin_lock_irqsave(&gpio_lock, flags);
2119
2120	chip = desc->gdev->chip;
2121	if (chip && test_bit(FLAG_REQUESTED, &desc->flags)) {
2122		if (chip->free) {
2123			spin_unlock_irqrestore(&gpio_lock, flags);
2124			might_sleep_if(chip->can_sleep);
2125			chip->free(chip, gpio_chip_hwgpio(desc));
2126			spin_lock_irqsave(&gpio_lock, flags);
2127		}
2128		desc_set_label(desc, NULL);
2129		clear_bit(FLAG_ACTIVE_LOW, &desc->flags);
2130		clear_bit(FLAG_REQUESTED, &desc->flags);
2131		clear_bit(FLAG_OPEN_DRAIN, &desc->flags);
2132		clear_bit(FLAG_OPEN_SOURCE, &desc->flags);
2133		clear_bit(FLAG_IS_HOGGED, &desc->flags);
2134		ret = true;
2135	}
2136
2137	spin_unlock_irqrestore(&gpio_lock, flags);
2138	return ret;
2139}
2140
2141void gpiod_free(struct gpio_desc *desc)
2142{
2143	if (desc && desc->gdev && __gpiod_free(desc)) {
2144		module_put(desc->gdev->owner);
2145		put_device(&desc->gdev->dev);
2146	} else {
2147		WARN_ON(extra_checks);
2148	}
2149}
2150
2151/**
2152 * gpiochip_is_requested - return string iff signal was requested
2153 * @chip: controller managing the signal
2154 * @offset: of signal within controller's 0..(ngpio - 1) range
2155 *
2156 * Returns NULL if the GPIO is not currently requested, else a string.
2157 * The string returned is the label passed to gpio_request(); if none has been
2158 * passed it is a meaningless, non-NULL constant.
2159 *
2160 * This function is for use by GPIO controller drivers.  The label can
2161 * help with diagnostics, and knowing that the signal is used as a GPIO
2162 * can help avoid accidentally multiplexing it to another controller.
2163 */
2164const char *gpiochip_is_requested(struct gpio_chip *chip, unsigned offset)
2165{
2166	struct gpio_desc *desc;
2167
2168	if (offset >= chip->ngpio)
2169		return NULL;
2170
2171	desc = &chip->gpiodev->descs[offset];
2172
2173	if (test_bit(FLAG_REQUESTED, &desc->flags) == 0)
2174		return NULL;
2175	return desc->label;
2176}
2177EXPORT_SYMBOL_GPL(gpiochip_is_requested);
2178
2179/**
2180 * gpiochip_request_own_desc - Allow GPIO chip to request its own descriptor
2181 * @desc: GPIO descriptor to request
 
2182 * @label: label for the GPIO
2183 *
2184 * Function allows GPIO chip drivers to request and use their own GPIO
2185 * descriptors via gpiolib API. Difference to gpiod_request() is that this
2186 * function will not increase reference count of the GPIO chip module. This
2187 * allows the GPIO chip module to be unloaded as needed (we assume that the
2188 * GPIO chip driver handles freeing the GPIOs it has requested).
 
 
 
 
2189 */
2190struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum,
2191					    const char *label)
2192{
2193	struct gpio_desc *desc = gpiochip_get_desc(chip, hwnum);
2194	int err;
2195
2196	if (IS_ERR(desc)) {
2197		chip_err(chip, "failed to get GPIO descriptor\n");
2198		return desc;
2199	}
2200
2201	err = __gpiod_request(desc, label);
2202	if (err < 0)
2203		return ERR_PTR(err);
2204
2205	return desc;
2206}
2207EXPORT_SYMBOL_GPL(gpiochip_request_own_desc);
2208
2209/**
2210 * gpiochip_free_own_desc - Free GPIO requested by the chip driver
2211 * @desc: GPIO descriptor to free
2212 *
2213 * Function frees the given GPIO requested previously with
2214 * gpiochip_request_own_desc().
2215 */
2216void gpiochip_free_own_desc(struct gpio_desc *desc)
2217{
2218	if (desc)
2219		__gpiod_free(desc);
2220}
2221EXPORT_SYMBOL_GPL(gpiochip_free_own_desc);
2222
2223/*
2224 * Drivers MUST set GPIO direction before making get/set calls.  In
2225 * some cases this is done in early boot, before IRQs are enabled.
2226 *
2227 * As a rule these aren't called more than once (except for drivers
2228 * using the open-drain emulation idiom) so these are natural places
2229 * to accumulate extra debugging checks.  Note that we can't (yet)
2230 * rely on gpio_request() having been called beforehand.
2231 */
2232
2233/**
2234 * gpiod_direction_input - set the GPIO direction to input
2235 * @desc:	GPIO to set to input
2236 *
2237 * Set the direction of the passed GPIO to input, such as gpiod_get_value() can
2238 * be called safely on it.
2239 *
2240 * Return 0 in case of success, else an error code.
2241 */
2242int gpiod_direction_input(struct gpio_desc *desc)
2243{
2244	struct gpio_chip	*chip;
2245	int			status = -EINVAL;
2246
2247	VALIDATE_DESC(desc);
2248	chip = desc->gdev->chip;
2249
2250	if (!chip->get || !chip->direction_input) {
2251		gpiod_warn(desc,
2252			"%s: missing get() or direction_input() operations\n",
2253			__func__);
2254		return -EIO;
2255	}
2256
2257	status = chip->direction_input(chip, gpio_chip_hwgpio(desc));
2258	if (status == 0)
2259		clear_bit(FLAG_IS_OUT, &desc->flags);
2260
2261	trace_gpio_direction(desc_to_gpio(desc), 1, status);
2262
2263	return status;
2264}
2265EXPORT_SYMBOL_GPL(gpiod_direction_input);
2266
2267static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 
 
 
 
 
 
 
 
2268{
2269	struct gpio_chip *gc = desc->gdev->chip;
2270	int val = !!value;
2271	int ret;
2272
2273	/* GPIOs used for IRQs shall not be set as output */
2274	if (test_bit(FLAG_USED_AS_IRQ, &desc->flags)) {
2275		gpiod_err(desc,
2276			  "%s: tried to set a GPIO tied to an IRQ as output\n",
2277			  __func__);
2278		return -EIO;
2279	}
2280
2281	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
2282		/* First see if we can enable open drain in hardware */
2283		if (gc->set_single_ended) {
2284			ret = gc->set_single_ended(gc, gpio_chip_hwgpio(desc),
2285						   LINE_MODE_OPEN_DRAIN);
2286			if (!ret)
2287				goto set_output_value;
2288		}
2289		/* Emulate open drain by not actively driving the line high */
2290		if (val)
2291			return gpiod_direction_input(desc);
2292	}
2293	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
2294		if (gc->set_single_ended) {
2295			ret = gc->set_single_ended(gc, gpio_chip_hwgpio(desc),
2296						   LINE_MODE_OPEN_SOURCE);
2297			if (!ret)
2298				goto set_output_value;
2299		}
2300		/* Emulate open source by not actively driving the line low */
2301		if (!val)
2302			return gpiod_direction_input(desc);
2303	} else {
2304		/* Make sure to disable open drain/source hardware, if any */
2305		if (gc->set_single_ended)
2306			gc->set_single_ended(gc,
2307					     gpio_chip_hwgpio(desc),
2308					     LINE_MODE_PUSH_PULL);
2309	}
2310
2311set_output_value:
2312	if (!gc->set || !gc->direction_output) {
2313		gpiod_warn(desc,
2314		       "%s: missing set() or direction_output() operations\n",
2315		       __func__);
2316		return -EIO;
2317	}
2318
2319	ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), val);
2320	if (!ret)
2321		set_bit(FLAG_IS_OUT, &desc->flags);
2322	trace_gpio_value(desc_to_gpio(desc), 0, val);
2323	trace_gpio_direction(desc_to_gpio(desc), 0, ret);
2324	return ret;
2325}
2326
2327/**
2328 * gpiod_direction_output_raw - set the GPIO direction to output
2329 * @desc:	GPIO to set to output
2330 * @value:	initial output value of the GPIO
2331 *
2332 * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
2333 * be called safely on it. The initial value of the output must be specified
2334 * as raw value on the physical line without regard for the ACTIVE_LOW status.
2335 *
2336 * Return 0 in case of success, else an error code.
2337 */
2338int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
2339{
2340	VALIDATE_DESC(desc);
2341	return _gpiod_direction_output_raw(desc, value);
2342}
2343EXPORT_SYMBOL_GPL(gpiod_direction_output_raw);
2344
2345/**
2346 * gpiod_direction_output - set the GPIO direction to output
2347 * @desc:	GPIO to set to output
2348 * @value:	initial output value of the GPIO
2349 *
2350 * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
2351 * be called safely on it. The initial value of the output must be specified
2352 * as the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
2353 * account.
2354 *
2355 * Return 0 in case of success, else an error code.
2356 */
2357int gpiod_direction_output(struct gpio_desc *desc, int value)
2358{
 
 
 
2359	VALIDATE_DESC(desc);
2360	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
2361		value = !value;
2362	else
2363		value = !!value;
2364	return _gpiod_direction_output_raw(desc, value);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2365}
2366EXPORT_SYMBOL_GPL(gpiod_direction_output);
2367
2368/**
2369 * gpiod_set_debounce - sets @debounce time for a @gpio
2370 * @gpio: the gpio to set debounce time
2371 * @debounce: debounce time is microseconds
2372 *
2373 * returns -ENOTSUPP if the controller does not support setting
2374 * debounce.
 
2375 */
2376int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
2377{
2378	struct gpio_chip	*chip;
 
2379
2380	VALIDATE_DESC(desc);
2381	chip = desc->gdev->chip;
2382	if (!chip->set || !chip->set_debounce) {
2383		gpiod_dbg(desc,
2384			  "%s: missing set() or set_debounce() operations\n",
2385			  __func__);
2386		return -ENOTSUPP;
2387	}
2388
2389	return chip->set_debounce(chip, gpio_chip_hwgpio(desc), debounce);
 
2390}
2391EXPORT_SYMBOL_GPL(gpiod_set_debounce);
2392
2393/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2394 * gpiod_is_active_low - test whether a GPIO is active-low or not
2395 * @desc: the gpio descriptor to test
2396 *
2397 * Returns 1 if the GPIO is active-low, 0 otherwise.
2398 */
2399int gpiod_is_active_low(const struct gpio_desc *desc)
2400{
2401	VALIDATE_DESC(desc);
2402	return test_bit(FLAG_ACTIVE_LOW, &desc->flags);
2403}
2404EXPORT_SYMBOL_GPL(gpiod_is_active_low);
2405
2406/* I/O calls are only valid after configuration completed; the relevant
2407 * "is this a valid GPIO" error checks should already have been done.
2408 *
2409 * "Get" operations are often inlinable as reading a pin value register,
2410 * and masking the relevant bit in that register.
2411 *
2412 * When "set" operations are inlinable, they involve writing that mask to
2413 * one register to set a low value, or a different register to set it high.
2414 * Otherwise locking is needed, so there may be little value to inlining.
2415 *
2416 *------------------------------------------------------------------------
2417 *
2418 * IMPORTANT!!!  The hot paths -- get/set value -- assume that callers
2419 * have requested the GPIO.  That can include implicit requesting by
2420 * a direction setting call.  Marking a gpio as requested locks its chip
2421 * in memory, guaranteeing that these table lookups need no more locking
2422 * and that gpiochip_remove() will fail.
2423 *
2424 * REVISIT when debugging, consider adding some instrumentation to ensure
2425 * that the GPIO was actually requested.
2426 */
2427
2428static int _gpiod_get_raw_value(const struct gpio_desc *desc)
2429{
2430	struct gpio_chip	*chip;
2431	int offset;
2432	int value;
2433
2434	chip = desc->gdev->chip;
2435	offset = gpio_chip_hwgpio(desc);
2436	value = chip->get ? chip->get(chip, offset) : -EIO;
2437	value = value < 0 ? value : !!value;
2438	trace_gpio_value(desc_to_gpio(desc), 1, value);
2439	return value;
2440}
2441
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2442/**
2443 * gpiod_get_raw_value() - return a gpio's raw value
2444 * @desc: gpio whose value will be returned
2445 *
2446 * Return the GPIO's raw value, i.e. the value of the physical line disregarding
2447 * its ACTIVE_LOW status, or negative errno on failure.
2448 *
2449 * This function should be called from contexts where we cannot sleep, and will
2450 * complain if the GPIO chip functions potentially sleep.
2451 */
2452int gpiod_get_raw_value(const struct gpio_desc *desc)
2453{
2454	VALIDATE_DESC(desc);
2455	/* Should be using gpio_get_value_cansleep() */
2456	WARN_ON(desc->gdev->chip->can_sleep);
2457	return _gpiod_get_raw_value(desc);
2458}
2459EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
2460
2461/**
2462 * gpiod_get_value() - return a gpio's value
2463 * @desc: gpio whose value will be returned
2464 *
2465 * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
2466 * account, or negative errno on failure.
2467 *
2468 * This function should be called from contexts where we cannot sleep, and will
2469 * complain if the GPIO chip functions potentially sleep.
2470 */
2471int gpiod_get_value(const struct gpio_desc *desc)
2472{
2473	int value;
2474
2475	VALIDATE_DESC(desc);
2476	/* Should be using gpio_get_value_cansleep() */
2477	WARN_ON(desc->gdev->chip->can_sleep);
2478
2479	value = _gpiod_get_raw_value(desc);
2480	if (value < 0)
2481		return value;
2482
2483	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
2484		value = !value;
2485
2486	return value;
2487}
2488EXPORT_SYMBOL_GPL(gpiod_get_value);
2489
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2490/*
2491 *  _gpio_set_open_drain_value() - Set the open drain gpio's value.
2492 * @desc: gpio descriptor whose state need to be set.
2493 * @value: Non-zero for setting it HIGH otherwise it will set to LOW.
2494 */
2495static void _gpio_set_open_drain_value(struct gpio_desc *desc, bool value)
2496{
2497	int err = 0;
2498	struct gpio_chip *chip = desc->gdev->chip;
2499	int offset = gpio_chip_hwgpio(desc);
2500
2501	if (value) {
2502		err = chip->direction_input(chip, offset);
2503		if (!err)
2504			clear_bit(FLAG_IS_OUT, &desc->flags);
2505	} else {
2506		err = chip->direction_output(chip, offset, 0);
2507		if (!err)
2508			set_bit(FLAG_IS_OUT, &desc->flags);
2509	}
2510	trace_gpio_direction(desc_to_gpio(desc), value, err);
2511	if (err < 0)
2512		gpiod_err(desc,
2513			  "%s: Error in set_value for open drain err %d\n",
2514			  __func__, err);
2515}
2516
2517/*
2518 *  _gpio_set_open_source_value() - Set the open source gpio's value.
2519 * @desc: gpio descriptor whose state need to be set.
2520 * @value: Non-zero for setting it HIGH otherwise it will set to LOW.
2521 */
2522static void _gpio_set_open_source_value(struct gpio_desc *desc, bool value)
2523{
2524	int err = 0;
2525	struct gpio_chip *chip = desc->gdev->chip;
2526	int offset = gpio_chip_hwgpio(desc);
2527
2528	if (value) {
2529		err = chip->direction_output(chip, offset, 1);
2530		if (!err)
2531			set_bit(FLAG_IS_OUT, &desc->flags);
2532	} else {
2533		err = chip->direction_input(chip, offset);
2534		if (!err)
2535			clear_bit(FLAG_IS_OUT, &desc->flags);
2536	}
2537	trace_gpio_direction(desc_to_gpio(desc), !value, err);
2538	if (err < 0)
2539		gpiod_err(desc,
2540			  "%s: Error in set_value for open source err %d\n",
2541			  __func__, err);
2542}
2543
2544static void _gpiod_set_raw_value(struct gpio_desc *desc, bool value)
2545{
2546	struct gpio_chip	*chip;
2547
2548	chip = desc->gdev->chip;
2549	trace_gpio_value(desc_to_gpio(desc), 0, value);
2550	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
2551		_gpio_set_open_drain_value(desc, value);
2552	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
2553		_gpio_set_open_source_value(desc, value);
2554	else
2555		chip->set(chip, gpio_chip_hwgpio(desc), value);
2556}
2557
2558/*
2559 * set multiple outputs on the same chip;
2560 * use the chip's set_multiple function if available;
2561 * otherwise set the outputs sequentially;
2562 * @mask: bit mask array; one bit per output; BITS_PER_LONG bits per word
2563 *        defines which outputs are to be changed
2564 * @bits: bit value array; one bit per output; BITS_PER_LONG bits per word
2565 *        defines the values the outputs specified by mask are to be set to
2566 */
2567static void gpio_chip_set_multiple(struct gpio_chip *chip,
2568				   unsigned long *mask, unsigned long *bits)
2569{
2570	if (chip->set_multiple) {
2571		chip->set_multiple(chip, mask, bits);
2572	} else {
2573		int i;
2574		for (i = 0; i < chip->ngpio; i++) {
2575			if (mask[BIT_WORD(i)] == 0) {
2576				/* no more set bits in this mask word;
2577				 * skip ahead to the next word */
2578				i = (BIT_WORD(i) + 1) * BITS_PER_LONG - 1;
2579				continue;
2580			}
2581			/* set outputs if the corresponding mask bit is set */
2582			if (__test_and_clear_bit(i, mask))
2583				chip->set(chip, i, test_bit(i, bits));
2584		}
2585	}
2586}
2587
2588void gpiod_set_array_value_complex(bool raw, bool can_sleep,
2589				   unsigned int array_size,
2590				   struct gpio_desc **desc_array,
2591				   int *value_array)
2592{
2593	int i = 0;
2594
2595	while (i < array_size) {
2596		struct gpio_chip *chip = desc_array[i]->gdev->chip;
2597		unsigned long mask[BITS_TO_LONGS(chip->ngpio)];
2598		unsigned long bits[BITS_TO_LONGS(chip->ngpio)];
2599		int count = 0;
2600
2601		if (!can_sleep)
2602			WARN_ON(chip->can_sleep);
2603
2604		memset(mask, 0, sizeof(mask));
2605		do {
2606			struct gpio_desc *desc = desc_array[i];
2607			int hwgpio = gpio_chip_hwgpio(desc);
2608			int value = value_array[i];
2609
2610			if (!raw && test_bit(FLAG_ACTIVE_LOW, &desc->flags))
2611				value = !value;
2612			trace_gpio_value(desc_to_gpio(desc), 0, value);
2613			/*
2614			 * collect all normal outputs belonging to the same chip
2615			 * open drain and open source outputs are set individually
2616			 */
2617			if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
2618				_gpio_set_open_drain_value(desc, value);
2619			} else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
2620				_gpio_set_open_source_value(desc, value);
2621			} else {
2622				__set_bit(hwgpio, mask);
2623				if (value)
2624					__set_bit(hwgpio, bits);
2625				else
2626					__clear_bit(hwgpio, bits);
2627				count++;
2628			}
2629			i++;
2630		} while ((i < array_size) &&
2631			 (desc_array[i]->gdev->chip == chip));
2632		/* push collected bits to outputs */
2633		if (count != 0)
2634			gpio_chip_set_multiple(chip, mask, bits);
2635	}
2636}
2637
2638/**
2639 * gpiod_set_raw_value() - assign a gpio's raw value
2640 * @desc: gpio whose value will be assigned
2641 * @value: value to assign
2642 *
2643 * Set the raw value of the GPIO, i.e. the value of its physical line without
2644 * regard for its ACTIVE_LOW status.
2645 *
2646 * This function should be called from contexts where we cannot sleep, and will
2647 * complain if the GPIO chip functions potentially sleep.
2648 */
2649void gpiod_set_raw_value(struct gpio_desc *desc, int value)
2650{
2651	VALIDATE_DESC_VOID(desc);
2652	/* Should be using gpiod_set_value_cansleep() */
2653	WARN_ON(desc->gdev->chip->can_sleep);
2654	_gpiod_set_raw_value(desc, value);
2655}
2656EXPORT_SYMBOL_GPL(gpiod_set_raw_value);
2657
2658/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2659 * gpiod_set_value() - assign a gpio's value
2660 * @desc: gpio whose value will be assigned
2661 * @value: value to assign
2662 *
2663 * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
2664 * account
2665 *
2666 * This function should be called from contexts where we cannot sleep, and will
2667 * complain if the GPIO chip functions potentially sleep.
2668 */
2669void gpiod_set_value(struct gpio_desc *desc, int value)
2670{
2671	VALIDATE_DESC_VOID(desc);
2672	/* Should be using gpiod_set_value_cansleep() */
2673	WARN_ON(desc->gdev->chip->can_sleep);
2674	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
2675		value = !value;
2676	_gpiod_set_raw_value(desc, value);
2677}
2678EXPORT_SYMBOL_GPL(gpiod_set_value);
2679
2680/**
2681 * gpiod_set_raw_array_value() - assign values to an array of GPIOs
2682 * @array_size: number of elements in the descriptor / value arrays
2683 * @desc_array: array of GPIO descriptors whose values will be assigned
2684 * @value_array: array of values to assign
2685 *
2686 * Set the raw values of the GPIOs, i.e. the values of the physical lines
2687 * without regard for their ACTIVE_LOW status.
2688 *
2689 * This function should be called from contexts where we cannot sleep, and will
2690 * complain if the GPIO chip functions potentially sleep.
2691 */
2692void gpiod_set_raw_array_value(unsigned int array_size,
2693			 struct gpio_desc **desc_array, int *value_array)
2694{
2695	if (!desc_array)
2696		return;
2697	gpiod_set_array_value_complex(true, false, array_size, desc_array,
2698				      value_array);
2699}
2700EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value);
2701
2702/**
2703 * gpiod_set_array_value() - assign values to an array of GPIOs
2704 * @array_size: number of elements in the descriptor / value arrays
2705 * @desc_array: array of GPIO descriptors whose values will be assigned
2706 * @value_array: array of values to assign
2707 *
2708 * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
2709 * into account.
2710 *
2711 * This function should be called from contexts where we cannot sleep, and will
2712 * complain if the GPIO chip functions potentially sleep.
2713 */
2714void gpiod_set_array_value(unsigned int array_size,
2715			   struct gpio_desc **desc_array, int *value_array)
2716{
2717	if (!desc_array)
2718		return;
2719	gpiod_set_array_value_complex(false, false, array_size, desc_array,
2720				      value_array);
2721}
2722EXPORT_SYMBOL_GPL(gpiod_set_array_value);
2723
2724/**
2725 * gpiod_cansleep() - report whether gpio value access may sleep
2726 * @desc: gpio to check
2727 *
2728 */
2729int gpiod_cansleep(const struct gpio_desc *desc)
2730{
2731	VALIDATE_DESC(desc);
2732	return desc->gdev->chip->can_sleep;
2733}
2734EXPORT_SYMBOL_GPL(gpiod_cansleep);
2735
2736/**
2737 * gpiod_to_irq() - return the IRQ corresponding to a GPIO
2738 * @desc: gpio whose IRQ will be returned (already requested)
2739 *
2740 * Return the IRQ corresponding to the passed GPIO, or an error code in case of
2741 * error.
2742 */
2743int gpiod_to_irq(const struct gpio_desc *desc)
2744{
2745	struct gpio_chip *chip;
2746	int offset;
2747
2748	/*
2749	 * Cannot VALIDATE_DESC() here as gpiod_to_irq() consumer semantics
2750	 * requires this function to not return zero on an invalid descriptor
2751	 * but rather a negative error number.
2752	 */
2753	if (!desc || IS_ERR(desc) || !desc->gdev || !desc->gdev->chip)
2754		return -EINVAL;
2755
2756	chip = desc->gdev->chip;
2757	offset = gpio_chip_hwgpio(desc);
2758	if (chip->to_irq) {
2759		int retirq = chip->to_irq(chip, offset);
2760
2761		/* Zero means NO_IRQ */
2762		if (!retirq)
2763			return -ENXIO;
2764
2765		return retirq;
2766	}
2767	return -ENXIO;
2768}
2769EXPORT_SYMBOL_GPL(gpiod_to_irq);
2770
2771/**
2772 * gpiochip_lock_as_irq() - lock a GPIO to be used as IRQ
2773 * @chip: the chip the GPIO to lock belongs to
2774 * @offset: the offset of the GPIO to lock as IRQ
2775 *
2776 * This is used directly by GPIO drivers that want to lock down
2777 * a certain GPIO line to be used for IRQs.
2778 */
2779int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
2780{
2781	struct gpio_desc *desc;
2782
2783	desc = gpiochip_get_desc(chip, offset);
2784	if (IS_ERR(desc))
2785		return PTR_ERR(desc);
2786
2787	/*
2788	 * If it's fast: flush the direction setting if something changed
2789	 * behind our back
2790	 */
2791	if (!chip->can_sleep && chip->get_direction) {
2792		int dir = chip->get_direction(chip, offset);
2793
2794		if (dir)
2795			clear_bit(FLAG_IS_OUT, &desc->flags);
2796		else
2797			set_bit(FLAG_IS_OUT, &desc->flags);
2798	}
2799
2800	if (test_bit(FLAG_IS_OUT, &desc->flags)) {
2801		chip_err(chip,
2802			  "%s: tried to flag a GPIO set as output for IRQ\n",
2803			  __func__);
2804		return -EIO;
2805	}
2806
2807	set_bit(FLAG_USED_AS_IRQ, &desc->flags);
2808
2809	/*
2810	 * If the consumer has not set up a label (such as when the
2811	 * IRQ is referenced from .to_irq()) we set up a label here
2812	 * so it is clear this is used as an interrupt.
2813	 */
2814	if (!desc->label)
2815		desc_set_label(desc, "interrupt");
2816
2817	return 0;
2818}
2819EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq);
2820
2821/**
2822 * gpiochip_unlock_as_irq() - unlock a GPIO used as IRQ
2823 * @chip: the chip the GPIO to lock belongs to
2824 * @offset: the offset of the GPIO to lock as IRQ
2825 *
2826 * This is used directly by GPIO drivers that want to indicate
2827 * that a certain GPIO is no longer used exclusively for IRQ.
2828 */
2829void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset)
2830{
2831	struct gpio_desc *desc;
2832
2833	desc = gpiochip_get_desc(chip, offset);
2834	if (IS_ERR(desc))
2835		return;
2836
2837	clear_bit(FLAG_USED_AS_IRQ, &desc->flags);
2838
2839	/* If we only had this marking, erase it */
2840	if (desc->label && !strcmp(desc->label, "interrupt"))
2841		desc_set_label(desc, NULL);
2842}
2843EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq);
2844
2845bool gpiochip_line_is_irq(struct gpio_chip *chip, unsigned int offset)
2846{
2847	if (offset >= chip->ngpio)
2848		return false;
2849
2850	return test_bit(FLAG_USED_AS_IRQ, &chip->gpiodev->descs[offset].flags);
2851}
2852EXPORT_SYMBOL_GPL(gpiochip_line_is_irq);
2853
2854bool gpiochip_line_is_open_drain(struct gpio_chip *chip, unsigned int offset)
2855{
2856	if (offset >= chip->ngpio)
2857		return false;
2858
2859	return test_bit(FLAG_OPEN_DRAIN, &chip->gpiodev->descs[offset].flags);
2860}
2861EXPORT_SYMBOL_GPL(gpiochip_line_is_open_drain);
2862
2863bool gpiochip_line_is_open_source(struct gpio_chip *chip, unsigned int offset)
2864{
2865	if (offset >= chip->ngpio)
2866		return false;
2867
2868	return test_bit(FLAG_OPEN_SOURCE, &chip->gpiodev->descs[offset].flags);
2869}
2870EXPORT_SYMBOL_GPL(gpiochip_line_is_open_source);
2871
 
 
 
 
 
 
 
 
 
2872/**
2873 * gpiod_get_raw_value_cansleep() - return a gpio's raw value
2874 * @desc: gpio whose value will be returned
2875 *
2876 * Return the GPIO's raw value, i.e. the value of the physical line disregarding
2877 * its ACTIVE_LOW status, or negative errno on failure.
2878 *
2879 * This function is to be called from contexts that can sleep.
2880 */
2881int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
2882{
2883	might_sleep_if(extra_checks);
2884	VALIDATE_DESC(desc);
2885	return _gpiod_get_raw_value(desc);
2886}
2887EXPORT_SYMBOL_GPL(gpiod_get_raw_value_cansleep);
2888
2889/**
2890 * gpiod_get_value_cansleep() - return a gpio's value
2891 * @desc: gpio whose value will be returned
2892 *
2893 * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
2894 * account, or negative errno on failure.
2895 *
2896 * This function is to be called from contexts that can sleep.
2897 */
2898int gpiod_get_value_cansleep(const struct gpio_desc *desc)
2899{
2900	int value;
2901
2902	might_sleep_if(extra_checks);
2903	VALIDATE_DESC(desc);
2904	value = _gpiod_get_raw_value(desc);
2905	if (value < 0)
2906		return value;
2907
2908	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
2909		value = !value;
2910
2911	return value;
2912}
2913EXPORT_SYMBOL_GPL(gpiod_get_value_cansleep);
2914
2915/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2916 * gpiod_set_raw_value_cansleep() - assign a gpio's raw value
2917 * @desc: gpio whose value will be assigned
2918 * @value: value to assign
2919 *
2920 * Set the raw value of the GPIO, i.e. the value of its physical line without
2921 * regard for its ACTIVE_LOW status.
2922 *
2923 * This function is to be called from contexts that can sleep.
2924 */
2925void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
2926{
2927	might_sleep_if(extra_checks);
2928	VALIDATE_DESC_VOID(desc);
2929	_gpiod_set_raw_value(desc, value);
2930}
2931EXPORT_SYMBOL_GPL(gpiod_set_raw_value_cansleep);
2932
2933/**
2934 * gpiod_set_value_cansleep() - assign a gpio's value
2935 * @desc: gpio whose value will be assigned
2936 * @value: value to assign
2937 *
2938 * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
2939 * account
2940 *
2941 * This function is to be called from contexts that can sleep.
2942 */
2943void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
2944{
2945	might_sleep_if(extra_checks);
2946	VALIDATE_DESC_VOID(desc);
2947	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
2948		value = !value;
2949	_gpiod_set_raw_value(desc, value);
2950}
2951EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
2952
2953/**
2954 * gpiod_set_raw_array_value_cansleep() - assign values to an array of GPIOs
2955 * @array_size: number of elements in the descriptor / value arrays
2956 * @desc_array: array of GPIO descriptors whose values will be assigned
2957 * @value_array: array of values to assign
2958 *
2959 * Set the raw values of the GPIOs, i.e. the values of the physical lines
2960 * without regard for their ACTIVE_LOW status.
2961 *
2962 * This function is to be called from contexts that can sleep.
2963 */
2964void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
2965					struct gpio_desc **desc_array,
2966					int *value_array)
2967{
2968	might_sleep_if(extra_checks);
2969	if (!desc_array)
2970		return;
2971	gpiod_set_array_value_complex(true, true, array_size, desc_array,
2972				      value_array);
2973}
2974EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value_cansleep);
2975
2976/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2977 * gpiod_set_array_value_cansleep() - assign values to an array of GPIOs
2978 * @array_size: number of elements in the descriptor / value arrays
2979 * @desc_array: array of GPIO descriptors whose values will be assigned
2980 * @value_array: array of values to assign
2981 *
2982 * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
2983 * into account.
2984 *
2985 * This function is to be called from contexts that can sleep.
2986 */
2987void gpiod_set_array_value_cansleep(unsigned int array_size,
2988				    struct gpio_desc **desc_array,
2989				    int *value_array)
2990{
2991	might_sleep_if(extra_checks);
2992	if (!desc_array)
2993		return;
2994	gpiod_set_array_value_complex(false, true, array_size, desc_array,
2995				      value_array);
2996}
2997EXPORT_SYMBOL_GPL(gpiod_set_array_value_cansleep);
2998
2999/**
3000 * gpiod_add_lookup_table() - register GPIO device consumers
3001 * @table: table of consumers to register
3002 */
3003void gpiod_add_lookup_table(struct gpiod_lookup_table *table)
3004{
3005	mutex_lock(&gpio_lookup_lock);
3006
3007	list_add_tail(&table->list, &gpio_lookup_list);
3008
3009	mutex_unlock(&gpio_lookup_lock);
3010}
 
3011
3012/**
3013 * gpiod_remove_lookup_table() - unregister GPIO device consumers
3014 * @table: table of consumers to unregister
3015 */
3016void gpiod_remove_lookup_table(struct gpiod_lookup_table *table)
3017{
3018	mutex_lock(&gpio_lookup_lock);
3019
3020	list_del(&table->list);
3021
3022	mutex_unlock(&gpio_lookup_lock);
3023}
 
3024
3025static struct gpiod_lookup_table *gpiod_find_lookup_table(struct device *dev)
3026{
3027	const char *dev_id = dev ? dev_name(dev) : NULL;
3028	struct gpiod_lookup_table *table;
3029
3030	mutex_lock(&gpio_lookup_lock);
3031
3032	list_for_each_entry(table, &gpio_lookup_list, list) {
3033		if (table->dev_id && dev_id) {
3034			/*
3035			 * Valid strings on both ends, must be identical to have
3036			 * a match
3037			 */
3038			if (!strcmp(table->dev_id, dev_id))
3039				goto found;
3040		} else {
3041			/*
3042			 * One of the pointers is NULL, so both must be to have
3043			 * a match
3044			 */
3045			if (dev_id == table->dev_id)
3046				goto found;
3047		}
3048	}
3049	table = NULL;
3050
3051found:
3052	mutex_unlock(&gpio_lookup_lock);
3053	return table;
3054}
3055
3056static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
3057				    unsigned int idx,
3058				    enum gpio_lookup_flags *flags)
3059{
3060	struct gpio_desc *desc = ERR_PTR(-ENOENT);
3061	struct gpiod_lookup_table *table;
3062	struct gpiod_lookup *p;
3063
3064	table = gpiod_find_lookup_table(dev);
3065	if (!table)
3066		return desc;
3067
3068	for (p = &table->table[0]; p->chip_label; p++) {
3069		struct gpio_chip *chip;
3070
3071		/* idx must always match exactly */
3072		if (p->idx != idx)
3073			continue;
3074
3075		/* If the lookup entry has a con_id, require exact match */
3076		if (p->con_id && (!con_id || strcmp(p->con_id, con_id)))
3077			continue;
3078
3079		chip = find_chip_by_name(p->chip_label);
3080
3081		if (!chip) {
3082			dev_err(dev, "cannot find GPIO chip %s\n",
3083				p->chip_label);
3084			return ERR_PTR(-ENODEV);
3085		}
3086
3087		if (chip->ngpio <= p->chip_hwnum) {
3088			dev_err(dev,
3089				"requested GPIO %d is out of range [0..%d] for chip %s\n",
3090				idx, chip->ngpio, chip->label);
3091			return ERR_PTR(-EINVAL);
3092		}
3093
3094		desc = gpiochip_get_desc(chip, p->chip_hwnum);
3095		*flags = p->flags;
3096
3097		return desc;
3098	}
3099
3100	return desc;
3101}
3102
3103static int dt_gpio_count(struct device *dev, const char *con_id)
3104{
3105	int ret;
3106	char propname[32];
3107	unsigned int i;
3108
3109	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
3110		if (con_id)
3111			snprintf(propname, sizeof(propname), "%s-%s",
3112				 con_id, gpio_suffixes[i]);
3113		else
3114			snprintf(propname, sizeof(propname), "%s",
3115				 gpio_suffixes[i]);
3116
3117		ret = of_gpio_named_count(dev->of_node, propname);
3118		if (ret >= 0)
3119			break;
3120	}
3121	return ret;
3122}
3123
3124static int platform_gpio_count(struct device *dev, const char *con_id)
3125{
3126	struct gpiod_lookup_table *table;
3127	struct gpiod_lookup *p;
3128	unsigned int count = 0;
3129
3130	table = gpiod_find_lookup_table(dev);
3131	if (!table)
3132		return -ENOENT;
3133
3134	for (p = &table->table[0]; p->chip_label; p++) {
3135		if ((con_id && p->con_id && !strcmp(con_id, p->con_id)) ||
3136		    (!con_id && !p->con_id))
3137			count++;
3138	}
3139	if (!count)
3140		return -ENOENT;
3141
3142	return count;
3143}
3144
3145/**
3146 * gpiod_count - return the number of GPIOs associated with a device / function
3147 *		or -ENOENT if no GPIO has been assigned to the requested function
3148 * @dev:	GPIO consumer, can be NULL for system-global GPIOs
3149 * @con_id:	function within the GPIO consumer
3150 */
3151int gpiod_count(struct device *dev, const char *con_id)
3152{
3153	int count = -ENOENT;
3154
3155	if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
3156		count = dt_gpio_count(dev, con_id);
3157	else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev))
3158		count = acpi_gpio_count(dev, con_id);
3159
3160	if (count < 0)
3161		count = platform_gpio_count(dev, con_id);
3162
3163	return count;
3164}
3165EXPORT_SYMBOL_GPL(gpiod_count);
3166
3167/**
3168 * gpiod_get - obtain a GPIO for a given GPIO function
3169 * @dev:	GPIO consumer, can be NULL for system-global GPIOs
3170 * @con_id:	function within the GPIO consumer
3171 * @flags:	optional GPIO initialization flags
3172 *
3173 * Return the GPIO descriptor corresponding to the function con_id of device
3174 * dev, -ENOENT if no GPIO has been assigned to the requested function, or
3175 * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
3176 */
3177struct gpio_desc *__must_check gpiod_get(struct device *dev, const char *con_id,
3178					 enum gpiod_flags flags)
3179{
3180	return gpiod_get_index(dev, con_id, 0, flags);
3181}
3182EXPORT_SYMBOL_GPL(gpiod_get);
3183
3184/**
3185 * gpiod_get_optional - obtain an optional GPIO for a given GPIO function
3186 * @dev: GPIO consumer, can be NULL for system-global GPIOs
3187 * @con_id: function within the GPIO consumer
3188 * @flags: optional GPIO initialization flags
3189 *
3190 * This is equivalent to gpiod_get(), except that when no GPIO was assigned to
3191 * the requested function it will return NULL. This is convenient for drivers
3192 * that need to handle optional GPIOs.
3193 */
3194struct gpio_desc *__must_check gpiod_get_optional(struct device *dev,
3195						  const char *con_id,
3196						  enum gpiod_flags flags)
3197{
3198	return gpiod_get_index_optional(dev, con_id, 0, flags);
3199}
3200EXPORT_SYMBOL_GPL(gpiod_get_optional);
3201
3202
3203/**
3204 * gpiod_configure_flags - helper function to configure a given GPIO
3205 * @desc:	gpio whose value will be assigned
3206 * @con_id:	function within the GPIO consumer
3207 * @lflags:	gpio_lookup_flags - returned from of_find_gpio() or
3208 *		of_get_gpio_hog()
3209 * @dflags:	gpiod_flags - optional GPIO initialization flags
3210 *
3211 * Return 0 on success, -ENOENT if no GPIO has been assigned to the
3212 * requested function and/or index, or another IS_ERR() code if an error
3213 * occurred while trying to acquire the GPIO.
3214 */
3215static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
3216		unsigned long lflags, enum gpiod_flags dflags)
3217{
3218	int status;
3219
3220	if (lflags & GPIO_ACTIVE_LOW)
3221		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
 
3222	if (lflags & GPIO_OPEN_DRAIN)
3223		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
 
 
 
 
 
 
 
 
 
 
 
 
3224	if (lflags & GPIO_OPEN_SOURCE)
3225		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
3226
 
 
 
 
3227	/* No particular flag request, return here... */
3228	if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {
3229		pr_debug("no flags found for %s\n", con_id);
3230		return 0;
3231	}
3232
3233	/* Process flags */
3234	if (dflags & GPIOD_FLAGS_BIT_DIR_OUT)
3235		status = gpiod_direction_output(desc,
3236				!!(dflags & GPIOD_FLAGS_BIT_DIR_VAL));
3237	else
3238		status = gpiod_direction_input(desc);
3239
3240	return status;
3241}
3242
3243/**
3244 * gpiod_get_index - obtain a GPIO from a multi-index GPIO function
3245 * @dev:	GPIO consumer, can be NULL for system-global GPIOs
3246 * @con_id:	function within the GPIO consumer
3247 * @idx:	index of the GPIO to obtain in the consumer
3248 * @flags:	optional GPIO initialization flags
3249 *
3250 * This variant of gpiod_get() allows to access GPIOs other than the first
3251 * defined one for functions that define several GPIOs.
3252 *
3253 * Return a valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the
3254 * requested function and/or index, or another IS_ERR() code if an error
3255 * occurred while trying to acquire the GPIO.
3256 */
3257struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
3258					       const char *con_id,
3259					       unsigned int idx,
3260					       enum gpiod_flags flags)
3261{
3262	struct gpio_desc *desc = NULL;
3263	int status;
3264	enum gpio_lookup_flags lookupflags = 0;
 
 
3265
3266	dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
3267
3268	if (dev) {
3269		/* Using device tree? */
3270		if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
3271			dev_dbg(dev, "using device tree for GPIO lookup\n");
3272			desc = of_find_gpio(dev, con_id, idx, &lookupflags);
3273		} else if (ACPI_COMPANION(dev)) {
3274			dev_dbg(dev, "using ACPI for GPIO lookup\n");
3275			desc = acpi_find_gpio(dev, con_id, idx, flags, &lookupflags);
3276		}
3277	}
3278
3279	/*
3280	 * Either we are not using DT or ACPI, or their lookup did not return
3281	 * a result. In that case, use platform lookup as a fallback.
3282	 */
3283	if (!desc || desc == ERR_PTR(-ENOENT)) {
3284		dev_dbg(dev, "using lookup tables for GPIO lookup\n");
3285		desc = gpiod_find(dev, con_id, idx, &lookupflags);
3286	}
3287
3288	if (IS_ERR(desc)) {
3289		dev_dbg(dev, "lookup for GPIO %s failed\n", con_id);
3290		return desc;
3291	}
3292
3293	status = gpiod_request(desc, con_id);
 
 
 
 
3294	if (status < 0)
3295		return ERR_PTR(status);
3296
3297	status = gpiod_configure_flags(desc, con_id, lookupflags, flags);
3298	if (status < 0) {
3299		dev_dbg(dev, "setup of GPIO %s failed\n", con_id);
3300		gpiod_put(desc);
3301		return ERR_PTR(status);
3302	}
3303
3304	return desc;
3305}
3306EXPORT_SYMBOL_GPL(gpiod_get_index);
3307
3308/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3309 * fwnode_get_named_gpiod - obtain a GPIO from firmware node
3310 * @fwnode:	handle of the firmware node
3311 * @propname:	name of the firmware property representing the GPIO
 
 
 
3312 *
3313 * This function can be used for drivers that get their configuration
3314 * from firmware.
3315 *
3316 * Function properly finds the corresponding GPIO using whatever is the
3317 * underlying firmware interface and then makes sure that the GPIO
3318 * descriptor is requested before it is returned to the caller.
3319 *
 
 
 
 
3320 * In case of error an ERR_PTR() is returned.
3321 */
3322struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
3323					 const char *propname)
 
 
3324{
3325	struct gpio_desc *desc = ERR_PTR(-ENODEV);
3326	bool active_low = false;
3327	bool single_ended = false;
3328	int ret;
3329
3330	if (!fwnode)
3331		return ERR_PTR(-EINVAL);
3332
3333	if (is_of_node(fwnode)) {
3334		enum of_gpio_flags flags;
3335
3336		desc = of_get_named_gpiod_flags(to_of_node(fwnode), propname, 0,
3337						&flags);
3338		if (!IS_ERR(desc)) {
3339			active_low = flags & OF_GPIO_ACTIVE_LOW;
3340			single_ended = flags & OF_GPIO_SINGLE_ENDED;
3341		}
3342	} else if (is_acpi_node(fwnode)) {
3343		struct acpi_gpio_info info;
3344
3345		desc = acpi_node_get_gpiod(fwnode, propname, 0, &info);
3346		if (!IS_ERR(desc))
3347			active_low = info.polarity == GPIO_ACTIVE_LOW;
3348	}
3349
3350	if (IS_ERR(desc))
3351		return desc;
 
 
 
3352
3353	ret = gpiod_request(desc, NULL);
 
3354	if (ret)
3355		return ERR_PTR(ret);
3356
3357	if (active_low)
3358		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
3359
3360	if (single_ended) {
3361		if (active_low)
3362			set_bit(FLAG_OPEN_DRAIN, &desc->flags);
3363		else
3364			set_bit(FLAG_OPEN_SOURCE, &desc->flags);
3365	}
3366
3367	return desc;
3368}
3369EXPORT_SYMBOL_GPL(fwnode_get_named_gpiod);
3370
3371/**
3372 * gpiod_get_index_optional - obtain an optional GPIO from a multi-index GPIO
3373 *                            function
3374 * @dev: GPIO consumer, can be NULL for system-global GPIOs
3375 * @con_id: function within the GPIO consumer
3376 * @index: index of the GPIO to obtain in the consumer
3377 * @flags: optional GPIO initialization flags
3378 *
3379 * This is equivalent to gpiod_get_index(), except that when no GPIO with the
3380 * specified index was assigned to the requested function it will return NULL.
3381 * This is convenient for drivers that need to handle optional GPIOs.
3382 */
3383struct gpio_desc *__must_check gpiod_get_index_optional(struct device *dev,
3384							const char *con_id,
3385							unsigned int index,
3386							enum gpiod_flags flags)
3387{
3388	struct gpio_desc *desc;
3389
3390	desc = gpiod_get_index(dev, con_id, index, flags);
3391	if (IS_ERR(desc)) {
3392		if (PTR_ERR(desc) == -ENOENT)
3393			return NULL;
3394	}
3395
3396	return desc;
3397}
3398EXPORT_SYMBOL_GPL(gpiod_get_index_optional);
3399
3400/**
3401 * gpiod_hog - Hog the specified GPIO desc given the provided flags
3402 * @desc:	gpio whose value will be assigned
3403 * @name:	gpio line name
3404 * @lflags:	gpio_lookup_flags - returned from of_find_gpio() or
3405 *		of_get_gpio_hog()
3406 * @dflags:	gpiod_flags - optional GPIO initialization flags
3407 */
3408int gpiod_hog(struct gpio_desc *desc, const char *name,
3409	      unsigned long lflags, enum gpiod_flags dflags)
3410{
3411	struct gpio_chip *chip;
3412	struct gpio_desc *local_desc;
3413	int hwnum;
3414	int status;
3415
3416	chip = gpiod_to_chip(desc);
3417	hwnum = gpio_chip_hwgpio(desc);
3418
3419	local_desc = gpiochip_request_own_desc(chip, hwnum, name);
3420	if (IS_ERR(local_desc)) {
3421		status = PTR_ERR(local_desc);
3422		pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n",
3423		       name, chip->label, hwnum, status);
3424		return status;
3425	}
3426
3427	status = gpiod_configure_flags(desc, name, lflags, dflags);
3428	if (status < 0) {
3429		pr_err("setup of hog GPIO %s (chip %s, offset %d) failed, %d\n",
3430		       name, chip->label, hwnum, status);
3431		gpiochip_free_own_desc(desc);
3432		return status;
3433	}
3434
3435	/* Mark GPIO as hogged so it can be identified and removed later */
3436	set_bit(FLAG_IS_HOGGED, &desc->flags);
3437
3438	pr_info("GPIO line %d (%s) hogged as %s%s\n",
3439		desc_to_gpio(desc), name,
3440		(dflags&GPIOD_FLAGS_BIT_DIR_OUT) ? "output" : "input",
3441		(dflags&GPIOD_FLAGS_BIT_DIR_OUT) ?
3442		  (dflags&GPIOD_FLAGS_BIT_DIR_VAL) ? "/high" : "/low":"");
3443
3444	return 0;
3445}
3446
3447/**
3448 * gpiochip_free_hogs - Scan gpio-controller chip and release GPIO hog
3449 * @chip:	gpio chip to act on
3450 *
3451 * This is only used by of_gpiochip_remove to free hogged gpios
3452 */
3453static void gpiochip_free_hogs(struct gpio_chip *chip)
3454{
3455	int id;
3456
3457	for (id = 0; id < chip->ngpio; id++) {
3458		if (test_bit(FLAG_IS_HOGGED, &chip->gpiodev->descs[id].flags))
3459			gpiochip_free_own_desc(&chip->gpiodev->descs[id]);
3460	}
3461}
3462
3463/**
3464 * gpiod_get_array - obtain multiple GPIOs from a multi-index GPIO function
3465 * @dev:	GPIO consumer, can be NULL for system-global GPIOs
3466 * @con_id:	function within the GPIO consumer
3467 * @flags:	optional GPIO initialization flags
3468 *
3469 * This function acquires all the GPIOs defined under a given function.
3470 *
3471 * Return a struct gpio_descs containing an array of descriptors, -ENOENT if
3472 * no GPIO has been assigned to the requested function, or another IS_ERR()
3473 * code if an error occurred while trying to acquire the GPIOs.
3474 */
3475struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
3476						const char *con_id,
3477						enum gpiod_flags flags)
3478{
3479	struct gpio_desc *desc;
3480	struct gpio_descs *descs;
3481	int count;
3482
3483	count = gpiod_count(dev, con_id);
3484	if (count < 0)
3485		return ERR_PTR(count);
3486
3487	descs = kzalloc(sizeof(*descs) + sizeof(descs->desc[0]) * count,
3488			GFP_KERNEL);
3489	if (!descs)
3490		return ERR_PTR(-ENOMEM);
3491
3492	for (descs->ndescs = 0; descs->ndescs < count; ) {
3493		desc = gpiod_get_index(dev, con_id, descs->ndescs, flags);
3494		if (IS_ERR(desc)) {
3495			gpiod_put_array(descs);
3496			return ERR_CAST(desc);
3497		}
3498		descs->desc[descs->ndescs] = desc;
3499		descs->ndescs++;
3500	}
3501	return descs;
3502}
3503EXPORT_SYMBOL_GPL(gpiod_get_array);
3504
3505/**
3506 * gpiod_get_array_optional - obtain multiple GPIOs from a multi-index GPIO
3507 *                            function
3508 * @dev:	GPIO consumer, can be NULL for system-global GPIOs
3509 * @con_id:	function within the GPIO consumer
3510 * @flags:	optional GPIO initialization flags
3511 *
3512 * This is equivalent to gpiod_get_array(), except that when no GPIO was
3513 * assigned to the requested function it will return NULL.
3514 */
3515struct gpio_descs *__must_check gpiod_get_array_optional(struct device *dev,
3516							const char *con_id,
3517							enum gpiod_flags flags)
3518{
3519	struct gpio_descs *descs;
3520
3521	descs = gpiod_get_array(dev, con_id, flags);
3522	if (IS_ERR(descs) && (PTR_ERR(descs) == -ENOENT))
3523		return NULL;
3524
3525	return descs;
3526}
3527EXPORT_SYMBOL_GPL(gpiod_get_array_optional);
3528
3529/**
3530 * gpiod_put - dispose of a GPIO descriptor
3531 * @desc:	GPIO descriptor to dispose of
3532 *
3533 * No descriptor can be used after gpiod_put() has been called on it.
3534 */
3535void gpiod_put(struct gpio_desc *desc)
3536{
3537	gpiod_free(desc);
3538}
3539EXPORT_SYMBOL_GPL(gpiod_put);
3540
3541/**
3542 * gpiod_put_array - dispose of multiple GPIO descriptors
3543 * @descs:	struct gpio_descs containing an array of descriptors
3544 */
3545void gpiod_put_array(struct gpio_descs *descs)
3546{
3547	unsigned int i;
3548
3549	for (i = 0; i < descs->ndescs; i++)
3550		gpiod_put(descs->desc[i]);
3551
3552	kfree(descs);
3553}
3554EXPORT_SYMBOL_GPL(gpiod_put_array);
3555
3556static int __init gpiolib_dev_init(void)
3557{
3558	int ret;
3559
3560	/* Register GPIO sysfs bus */
3561	ret  = bus_register(&gpio_bus_type);
3562	if (ret < 0) {
3563		pr_err("gpiolib: could not register GPIO bus type\n");
3564		return ret;
3565	}
3566
3567	ret = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpiochip");
3568	if (ret < 0) {
3569		pr_err("gpiolib: failed to allocate char dev region\n");
3570		bus_unregister(&gpio_bus_type);
3571	} else {
3572		gpiolib_initialized = true;
3573		gpiochip_setup_devs();
3574	}
3575	return ret;
3576}
3577core_initcall(gpiolib_dev_init);
3578
3579#ifdef CONFIG_DEBUG_FS
3580
3581static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev)
3582{
3583	unsigned		i;
3584	struct gpio_chip	*chip = gdev->chip;
3585	unsigned		gpio = gdev->base;
3586	struct gpio_desc	*gdesc = &gdev->descs[0];
3587	int			is_out;
3588	int			is_irq;
3589
3590	for (i = 0; i < gdev->ngpio; i++, gpio++, gdesc++) {
3591		if (!test_bit(FLAG_REQUESTED, &gdesc->flags)) {
3592			if (gdesc->name) {
3593				seq_printf(s, " gpio-%-3d (%-20.20s)\n",
3594					   gpio, gdesc->name);
3595			}
3596			continue;
3597		}
3598
3599		gpiod_get_direction(gdesc);
3600		is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
3601		is_irq = test_bit(FLAG_USED_AS_IRQ, &gdesc->flags);
3602		seq_printf(s, " gpio-%-3d (%-20.20s|%-20.20s) %s %s %s",
3603			gpio, gdesc->name ? gdesc->name : "", gdesc->label,
3604			is_out ? "out" : "in ",
3605			chip->get
3606				? (chip->get(chip, i) ? "hi" : "lo")
3607				: "?  ",
3608			is_irq ? "IRQ" : "   ");
3609		seq_printf(s, "\n");
3610	}
3611}
3612
3613static void *gpiolib_seq_start(struct seq_file *s, loff_t *pos)
3614{
3615	unsigned long flags;
3616	struct gpio_device *gdev = NULL;
3617	loff_t index = *pos;
3618
3619	s->private = "";
3620
3621	spin_lock_irqsave(&gpio_lock, flags);
3622	list_for_each_entry(gdev, &gpio_devices, list)
3623		if (index-- == 0) {
3624			spin_unlock_irqrestore(&gpio_lock, flags);
3625			return gdev;
3626		}
3627	spin_unlock_irqrestore(&gpio_lock, flags);
3628
3629	return NULL;
3630}
3631
3632static void *gpiolib_seq_next(struct seq_file *s, void *v, loff_t *pos)
3633{
3634	unsigned long flags;
3635	struct gpio_device *gdev = v;
3636	void *ret = NULL;
3637
3638	spin_lock_irqsave(&gpio_lock, flags);
3639	if (list_is_last(&gdev->list, &gpio_devices))
3640		ret = NULL;
3641	else
3642		ret = list_entry(gdev->list.next, struct gpio_device, list);
3643	spin_unlock_irqrestore(&gpio_lock, flags);
3644
3645	s->private = "\n";
3646	++*pos;
3647
3648	return ret;
3649}
3650
3651static void gpiolib_seq_stop(struct seq_file *s, void *v)
3652{
3653}
3654
3655static int gpiolib_seq_show(struct seq_file *s, void *v)
3656{
3657	struct gpio_device *gdev = v;
3658	struct gpio_chip *chip = gdev->chip;
3659	struct device *parent;
3660
3661	if (!chip) {
3662		seq_printf(s, "%s%s: (dangling chip)", (char *)s->private,
3663			   dev_name(&gdev->dev));
3664		return 0;
3665	}
3666
3667	seq_printf(s, "%s%s: GPIOs %d-%d", (char *)s->private,
3668		   dev_name(&gdev->dev),
3669		   gdev->base, gdev->base + gdev->ngpio - 1);
3670	parent = chip->parent;
3671	if (parent)
3672		seq_printf(s, ", parent: %s/%s",
3673			   parent->bus ? parent->bus->name : "no-bus",
3674			   dev_name(parent));
3675	if (chip->label)
3676		seq_printf(s, ", %s", chip->label);
3677	if (chip->can_sleep)
3678		seq_printf(s, ", can sleep");
3679	seq_printf(s, ":\n");
3680
3681	if (chip->dbg_show)
3682		chip->dbg_show(s, chip);
3683	else
3684		gpiolib_dbg_show(s, gdev);
3685
3686	return 0;
3687}
3688
3689static const struct seq_operations gpiolib_seq_ops = {
3690	.start = gpiolib_seq_start,
3691	.next = gpiolib_seq_next,
3692	.stop = gpiolib_seq_stop,
3693	.show = gpiolib_seq_show,
3694};
3695
3696static int gpiolib_open(struct inode *inode, struct file *file)
3697{
3698	return seq_open(file, &gpiolib_seq_ops);
3699}
3700
3701static const struct file_operations gpiolib_operations = {
3702	.owner		= THIS_MODULE,
3703	.open		= gpiolib_open,
3704	.read		= seq_read,
3705	.llseek		= seq_lseek,
3706	.release	= seq_release,
3707};
3708
3709static int __init gpiolib_debugfs_init(void)
3710{
3711	/* /sys/kernel/debug/gpio */
3712	(void) debugfs_create_file("gpio", S_IFREG | S_IRUGO,
3713				NULL, NULL, &gpiolib_operations);
3714	return 0;
3715}
3716subsys_initcall(gpiolib_debugfs_init);
3717
3718#endif	/* DEBUG_FS */
v4.17
   1#include <linux/bitmap.h>
   2#include <linux/kernel.h>
   3#include <linux/module.h>
   4#include <linux/interrupt.h>
   5#include <linux/irq.h>
   6#include <linux/spinlock.h>
   7#include <linux/list.h>
   8#include <linux/device.h>
   9#include <linux/err.h>
  10#include <linux/debugfs.h>
  11#include <linux/seq_file.h>
  12#include <linux/gpio.h>
  13#include <linux/of_gpio.h>
  14#include <linux/idr.h>
  15#include <linux/slab.h>
  16#include <linux/acpi.h>
  17#include <linux/gpio/driver.h>
  18#include <linux/gpio/machine.h>
  19#include <linux/pinctrl/consumer.h>
  20#include <linux/cdev.h>
  21#include <linux/fs.h>
  22#include <linux/uaccess.h>
  23#include <linux/compat.h>
  24#include <linux/anon_inodes.h>
  25#include <linux/file.h>
  26#include <linux/kfifo.h>
  27#include <linux/poll.h>
  28#include <linux/timekeeping.h>
  29#include <uapi/linux/gpio.h>
  30
  31#include "gpiolib.h"
  32
  33#define CREATE_TRACE_POINTS
  34#include <trace/events/gpio.h>
  35
  36/* Implementation infrastructure for GPIO interfaces.
  37 *
  38 * The GPIO programming interface allows for inlining speed-critical
  39 * get/set operations for common cases, so that access to SOC-integrated
  40 * GPIOs can sometimes cost only an instruction or two per bit.
  41 */
  42
  43
  44/* When debugging, extend minimal trust to callers and platform code.
  45 * Also emit diagnostic messages that may help initial bringup, when
  46 * board setup or driver bugs are most common.
  47 *
  48 * Otherwise, minimize overhead in what may be bitbanging codepaths.
  49 */
  50#ifdef	DEBUG
  51#define	extra_checks	1
  52#else
  53#define	extra_checks	0
  54#endif
  55
  56/* Device and char device-related information */
  57static DEFINE_IDA(gpio_ida);
  58static dev_t gpio_devt;
  59#define GPIO_DEV_MAX 256 /* 256 GPIO chip devices supported */
  60static struct bus_type gpio_bus_type = {
  61	.name = "gpio",
  62};
  63
  64/* gpio_lock prevents conflicts during gpio_desc[] table updates.
  65 * While any GPIO is requested, its gpio_chip is not removable;
  66 * each GPIO's "requested" flag serves as a lock and refcount.
  67 */
  68DEFINE_SPINLOCK(gpio_lock);
  69
  70static DEFINE_MUTEX(gpio_lookup_lock);
  71static LIST_HEAD(gpio_lookup_list);
  72LIST_HEAD(gpio_devices);
  73
  74static void gpiochip_free_hogs(struct gpio_chip *chip);
  75static int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
  76				struct lock_class_key *lock_key,
  77				struct lock_class_key *request_key);
  78static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip);
  79static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip);
  80static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip);
  81
  82static bool gpiolib_initialized;
  83
  84static inline void desc_set_label(struct gpio_desc *d, const char *label)
  85{
  86	d->label = label;
  87}
  88
  89/**
  90 * gpio_to_desc - Convert a GPIO number to its descriptor
  91 * @gpio: global GPIO number
  92 *
  93 * Returns:
  94 * The GPIO descriptor associated with the given GPIO, or %NULL if no GPIO
  95 * with the given number exists in the system.
  96 */
  97struct gpio_desc *gpio_to_desc(unsigned gpio)
  98{
  99	struct gpio_device *gdev;
 100	unsigned long flags;
 101
 102	spin_lock_irqsave(&gpio_lock, flags);
 103
 104	list_for_each_entry(gdev, &gpio_devices, list) {
 105		if (gdev->base <= gpio &&
 106		    gdev->base + gdev->ngpio > gpio) {
 107			spin_unlock_irqrestore(&gpio_lock, flags);
 108			return &gdev->descs[gpio - gdev->base];
 109		}
 110	}
 111
 112	spin_unlock_irqrestore(&gpio_lock, flags);
 113
 114	if (!gpio_is_valid(gpio))
 115		WARN(1, "invalid GPIO %d\n", gpio);
 116
 117	return NULL;
 118}
 119EXPORT_SYMBOL_GPL(gpio_to_desc);
 120
 121/**
 122 * gpiochip_get_desc - get the GPIO descriptor corresponding to the given
 123 *                     hardware number for this chip
 124 * @chip: GPIO chip
 125 * @hwnum: hardware number of the GPIO for this chip
 126 *
 127 * Returns:
 128 * A pointer to the GPIO descriptor or %ERR_PTR(-EINVAL) if no GPIO exists
 129 * in the given chip for the specified hardware number.
 130 */
 131struct gpio_desc *gpiochip_get_desc(struct gpio_chip *chip,
 132				    u16 hwnum)
 133{
 134	struct gpio_device *gdev = chip->gpiodev;
 135
 136	if (hwnum >= gdev->ngpio)
 137		return ERR_PTR(-EINVAL);
 138
 139	return &gdev->descs[hwnum];
 140}
 141
 142/**
 143 * desc_to_gpio - convert a GPIO descriptor to the integer namespace
 144 * @desc: GPIO descriptor
 145 *
 146 * This should disappear in the future but is needed since we still
 147 * use GPIO numbers for error messages and sysfs nodes.
 148 *
 149 * Returns:
 150 * The global GPIO number for the GPIO specified by its descriptor.
 151 */
 152int desc_to_gpio(const struct gpio_desc *desc)
 153{
 154	return desc->gdev->base + (desc - &desc->gdev->descs[0]);
 155}
 156EXPORT_SYMBOL_GPL(desc_to_gpio);
 157
 158
 159/**
 160 * gpiod_to_chip - Return the GPIO chip to which a GPIO descriptor belongs
 161 * @desc:	descriptor to return the chip of
 162 */
 163struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
 164{
 165	if (!desc || !desc->gdev)
 166		return NULL;
 167	return desc->gdev->chip;
 168}
 169EXPORT_SYMBOL_GPL(gpiod_to_chip);
 170
 171/* dynamic allocation of GPIOs, e.g. on a hotplugged device */
 172static int gpiochip_find_base(int ngpio)
 173{
 174	struct gpio_device *gdev;
 175	int base = ARCH_NR_GPIOS - ngpio;
 176
 177	list_for_each_entry_reverse(gdev, &gpio_devices, list) {
 178		/* found a free space? */
 179		if (gdev->base + gdev->ngpio <= base)
 180			break;
 181		else
 182			/* nope, check the space right before the chip */
 183			base = gdev->base - ngpio;
 184	}
 185
 186	if (gpio_is_valid(base)) {
 187		pr_debug("%s: found new base at %d\n", __func__, base);
 188		return base;
 189	} else {
 190		pr_err("%s: cannot find free range\n", __func__);
 191		return -ENOSPC;
 192	}
 193}
 194
 195/**
 196 * gpiod_get_direction - return the current direction of a GPIO
 197 * @desc:	GPIO to get the direction of
 198 *
 199 * Returns 0 for output, 1 for input, or an error code in case of error.
 200 *
 201 * This function may sleep if gpiod_cansleep() is true.
 202 */
 203int gpiod_get_direction(struct gpio_desc *desc)
 204{
 205	struct gpio_chip	*chip;
 206	unsigned		offset;
 207	int			status = -EINVAL;
 208
 209	chip = gpiod_to_chip(desc);
 210	offset = gpio_chip_hwgpio(desc);
 211
 212	if (!chip->get_direction)
 213		return status;
 214
 215	status = chip->get_direction(chip, offset);
 216	if (status > 0) {
 217		/* GPIOF_DIR_IN, or other positive */
 218		status = 1;
 219		clear_bit(FLAG_IS_OUT, &desc->flags);
 220	}
 221	if (status == 0) {
 222		/* GPIOF_DIR_OUT */
 223		set_bit(FLAG_IS_OUT, &desc->flags);
 224	}
 225	return status;
 226}
 227EXPORT_SYMBOL_GPL(gpiod_get_direction);
 228
 229/*
 230 * Add a new chip to the global chips list, keeping the list of chips sorted
 231 * by range(means [base, base + ngpio - 1]) order.
 232 *
 233 * Return -EBUSY if the new chip overlaps with some other chip's integer
 234 * space.
 235 */
 236static int gpiodev_add_to_list(struct gpio_device *gdev)
 237{
 238	struct gpio_device *prev, *next;
 239
 240	if (list_empty(&gpio_devices)) {
 241		/* initial entry in list */
 242		list_add_tail(&gdev->list, &gpio_devices);
 243		return 0;
 244	}
 245
 246	next = list_entry(gpio_devices.next, struct gpio_device, list);
 247	if (gdev->base + gdev->ngpio <= next->base) {
 248		/* add before first entry */
 249		list_add(&gdev->list, &gpio_devices);
 250		return 0;
 251	}
 252
 253	prev = list_entry(gpio_devices.prev, struct gpio_device, list);
 254	if (prev->base + prev->ngpio <= gdev->base) {
 255		/* add behind last entry */
 256		list_add_tail(&gdev->list, &gpio_devices);
 257		return 0;
 258	}
 259
 260	list_for_each_entry_safe(prev, next, &gpio_devices, list) {
 261		/* at the end of the list */
 262		if (&next->list == &gpio_devices)
 263			break;
 264
 265		/* add between prev and next */
 266		if (prev->base + prev->ngpio <= gdev->base
 267				&& gdev->base + gdev->ngpio <= next->base) {
 268			list_add(&gdev->list, &prev->list);
 269			return 0;
 270		}
 271	}
 272
 273	dev_err(&gdev->dev, "GPIO integer space overlap, cannot add chip\n");
 274	return -EBUSY;
 275}
 276
 277/*
 278 * Convert a GPIO name to its descriptor
 279 */
 280static struct gpio_desc *gpio_name_to_desc(const char * const name)
 281{
 282	struct gpio_device *gdev;
 283	unsigned long flags;
 284
 285	spin_lock_irqsave(&gpio_lock, flags);
 286
 287	list_for_each_entry(gdev, &gpio_devices, list) {
 288		int i;
 289
 290		for (i = 0; i != gdev->ngpio; ++i) {
 291			struct gpio_desc *desc = &gdev->descs[i];
 292
 293			if (!desc->name || !name)
 294				continue;
 295
 296			if (!strcmp(desc->name, name)) {
 297				spin_unlock_irqrestore(&gpio_lock, flags);
 298				return desc;
 299			}
 300		}
 301	}
 302
 303	spin_unlock_irqrestore(&gpio_lock, flags);
 304
 305	return NULL;
 306}
 307
 308/*
 309 * Takes the names from gc->names and checks if they are all unique. If they
 310 * are, they are assigned to their gpio descriptors.
 311 *
 312 * Warning if one of the names is already used for a different GPIO.
 313 */
 314static int gpiochip_set_desc_names(struct gpio_chip *gc)
 315{
 316	struct gpio_device *gdev = gc->gpiodev;
 317	int i;
 318
 319	if (!gc->names)
 320		return 0;
 321
 322	/* First check all names if they are unique */
 323	for (i = 0; i != gc->ngpio; ++i) {
 324		struct gpio_desc *gpio;
 325
 326		gpio = gpio_name_to_desc(gc->names[i]);
 327		if (gpio)
 328			dev_warn(&gdev->dev,
 329				 "Detected name collision for GPIO name '%s'\n",
 330				 gc->names[i]);
 331	}
 332
 333	/* Then add all names to the GPIO descriptors */
 334	for (i = 0; i != gc->ngpio; ++i)
 335		gdev->descs[i].name = gc->names[i];
 336
 337	return 0;
 338}
 339
 340static unsigned long *gpiochip_allocate_mask(struct gpio_chip *chip)
 341{
 342	unsigned long *p;
 343
 344	p = kmalloc_array(BITS_TO_LONGS(chip->ngpio), sizeof(*p), GFP_KERNEL);
 345	if (!p)
 346		return NULL;
 347
 348	/* Assume by default all GPIOs are valid */
 349	bitmap_fill(p, chip->ngpio);
 350
 351	return p;
 352}
 353
 354static int gpiochip_init_valid_mask(struct gpio_chip *gpiochip)
 355{
 356#ifdef CONFIG_OF_GPIO
 357	int size;
 358	struct device_node *np = gpiochip->of_node;
 359
 360	size = of_property_count_u32_elems(np,  "gpio-reserved-ranges");
 361	if (size > 0 && size % 2 == 0)
 362		gpiochip->need_valid_mask = true;
 363#endif
 364
 365	if (!gpiochip->need_valid_mask)
 366		return 0;
 367
 368	gpiochip->valid_mask = gpiochip_allocate_mask(gpiochip);
 369	if (!gpiochip->valid_mask)
 370		return -ENOMEM;
 371
 372	return 0;
 373}
 374
 375static void gpiochip_free_valid_mask(struct gpio_chip *gpiochip)
 376{
 377	kfree(gpiochip->valid_mask);
 378	gpiochip->valid_mask = NULL;
 379}
 380
 381bool gpiochip_line_is_valid(const struct gpio_chip *gpiochip,
 382				unsigned int offset)
 383{
 384	/* No mask means all valid */
 385	if (likely(!gpiochip->valid_mask))
 386		return true;
 387	return test_bit(offset, gpiochip->valid_mask);
 388}
 389EXPORT_SYMBOL_GPL(gpiochip_line_is_valid);
 390
 391/*
 392 * GPIO line handle management
 393 */
 394
 395/**
 396 * struct linehandle_state - contains the state of a userspace handle
 397 * @gdev: the GPIO device the handle pertains to
 398 * @label: consumer label used to tag descriptors
 399 * @descs: the GPIO descriptors held by this handle
 400 * @numdescs: the number of descriptors held in the descs array
 401 */
 402struct linehandle_state {
 403	struct gpio_device *gdev;
 404	const char *label;
 405	struct gpio_desc *descs[GPIOHANDLES_MAX];
 406	u32 numdescs;
 407};
 408
 409#define GPIOHANDLE_REQUEST_VALID_FLAGS \
 410	(GPIOHANDLE_REQUEST_INPUT | \
 411	GPIOHANDLE_REQUEST_OUTPUT | \
 412	GPIOHANDLE_REQUEST_ACTIVE_LOW | \
 413	GPIOHANDLE_REQUEST_OPEN_DRAIN | \
 414	GPIOHANDLE_REQUEST_OPEN_SOURCE)
 415
 416static long linehandle_ioctl(struct file *filep, unsigned int cmd,
 417			     unsigned long arg)
 418{
 419	struct linehandle_state *lh = filep->private_data;
 420	void __user *ip = (void __user *)arg;
 421	struct gpiohandle_data ghd;
 422	int vals[GPIOHANDLES_MAX];
 423	int i;
 424
 425	if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) {
 426		/* TODO: check if descriptors are really input */
 427		int ret = gpiod_get_array_value_complex(false,
 428							true,
 429							lh->numdescs,
 430							lh->descs,
 431							vals);
 432		if (ret)
 433			return ret;
 434
 435		memset(&ghd, 0, sizeof(ghd));
 436		for (i = 0; i < lh->numdescs; i++)
 437			ghd.values[i] = vals[i];
 
 
 
 
 
 
 438
 439		if (copy_to_user(ip, &ghd, sizeof(ghd)))
 440			return -EFAULT;
 441
 442		return 0;
 443	} else if (cmd == GPIOHANDLE_SET_LINE_VALUES_IOCTL) {
 
 
 444		/* TODO: check if descriptors are really output */
 445		if (copy_from_user(&ghd, ip, sizeof(ghd)))
 446			return -EFAULT;
 447
 448		/* Clamp all values to [0,1] */
 449		for (i = 0; i < lh->numdescs; i++)
 450			vals[i] = !!ghd.values[i];
 451
 452		/* Reuse the array setting function */
 453		gpiod_set_array_value_complex(false,
 454					      true,
 455					      lh->numdescs,
 456					      lh->descs,
 457					      vals);
 458		return 0;
 459	}
 460	return -EINVAL;
 461}
 462
 463#ifdef CONFIG_COMPAT
 464static long linehandle_ioctl_compat(struct file *filep, unsigned int cmd,
 465			     unsigned long arg)
 466{
 467	return linehandle_ioctl(filep, cmd, (unsigned long)compat_ptr(arg));
 468}
 469#endif
 470
 471static int linehandle_release(struct inode *inode, struct file *filep)
 472{
 473	struct linehandle_state *lh = filep->private_data;
 474	struct gpio_device *gdev = lh->gdev;
 475	int i;
 476
 477	for (i = 0; i < lh->numdescs; i++)
 478		gpiod_free(lh->descs[i]);
 479	kfree(lh->label);
 480	kfree(lh);
 481	put_device(&gdev->dev);
 482	return 0;
 483}
 484
 485static const struct file_operations linehandle_fileops = {
 486	.release = linehandle_release,
 487	.owner = THIS_MODULE,
 488	.llseek = noop_llseek,
 489	.unlocked_ioctl = linehandle_ioctl,
 490#ifdef CONFIG_COMPAT
 491	.compat_ioctl = linehandle_ioctl_compat,
 492#endif
 493};
 494
 495static int linehandle_create(struct gpio_device *gdev, void __user *ip)
 496{
 497	struct gpiohandle_request handlereq;
 498	struct linehandle_state *lh;
 499	struct file *file;
 500	int fd, i, count = 0, ret;
 501	u32 lflags;
 502
 503	if (copy_from_user(&handlereq, ip, sizeof(handlereq)))
 504		return -EFAULT;
 505	if ((handlereq.lines == 0) || (handlereq.lines > GPIOHANDLES_MAX))
 506		return -EINVAL;
 507
 508	lflags = handlereq.flags;
 509
 510	/* Return an error if an unknown flag is set */
 511	if (lflags & ~GPIOHANDLE_REQUEST_VALID_FLAGS)
 512		return -EINVAL;
 513
 514	/*
 515	 * Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If
 516	 * the hardware actually supports enabling both at the same time the
 517	 * electrical result would be disastrous.
 518	 */
 519	if ((lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) &&
 520	    (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE))
 521		return -EINVAL;
 522
 523	/* OPEN_DRAIN and OPEN_SOURCE flags only make sense for output mode. */
 524	if (!(lflags & GPIOHANDLE_REQUEST_OUTPUT) &&
 525	    ((lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) ||
 526	     (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)))
 527		return -EINVAL;
 528
 529	lh = kzalloc(sizeof(*lh), GFP_KERNEL);
 530	if (!lh)
 531		return -ENOMEM;
 532	lh->gdev = gdev;
 533	get_device(&gdev->dev);
 534
 535	/* Make sure this is terminated */
 536	handlereq.consumer_label[sizeof(handlereq.consumer_label)-1] = '\0';
 537	if (strlen(handlereq.consumer_label)) {
 538		lh->label = kstrdup(handlereq.consumer_label,
 539				    GFP_KERNEL);
 540		if (!lh->label) {
 541			ret = -ENOMEM;
 542			goto out_free_lh;
 543		}
 544	}
 545
 546	/* Request each GPIO */
 547	for (i = 0; i < handlereq.lines; i++) {
 548		u32 offset = handlereq.lineoffsets[i];
 
 549		struct gpio_desc *desc;
 550
 551		if (offset >= gdev->ngpio) {
 552			ret = -EINVAL;
 553			goto out_free_descs;
 554		}
 555
 
 
 
 
 
 
 556		desc = &gdev->descs[offset];
 557		ret = gpiod_request(desc, lh->label);
 558		if (ret)
 559			goto out_free_descs;
 560		lh->descs[i] = desc;
 561		count = i;
 562
 563		if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
 564			set_bit(FLAG_ACTIVE_LOW, &desc->flags);
 565		if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN)
 566			set_bit(FLAG_OPEN_DRAIN, &desc->flags);
 567		if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
 568			set_bit(FLAG_OPEN_SOURCE, &desc->flags);
 569
 570		ret = gpiod_set_transitory(desc, false);
 571		if (ret < 0)
 572			goto out_free_descs;
 573
 574		/*
 575		 * Lines have to be requested explicitly for input
 576		 * or output, else the line will be treated "as is".
 577		 */
 578		if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
 579			int val = !!handlereq.default_values[i];
 580
 581			ret = gpiod_direction_output(desc, val);
 582			if (ret)
 583				goto out_free_descs;
 584		} else if (lflags & GPIOHANDLE_REQUEST_INPUT) {
 585			ret = gpiod_direction_input(desc);
 586			if (ret)
 587				goto out_free_descs;
 588		}
 589		dev_dbg(&gdev->dev, "registered chardev handle for line %d\n",
 590			offset);
 591	}
 592	/* Let i point at the last handle */
 593	i--;
 594	lh->numdescs = handlereq.lines;
 595
 596	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
 597	if (fd < 0) {
 598		ret = fd;
 599		goto out_free_descs;
 600	}
 601
 602	file = anon_inode_getfile("gpio-linehandle",
 603				  &linehandle_fileops,
 604				  lh,
 605				  O_RDONLY | O_CLOEXEC);
 606	if (IS_ERR(file)) {
 607		ret = PTR_ERR(file);
 608		goto out_put_unused_fd;
 609	}
 610
 611	handlereq.fd = fd;
 612	if (copy_to_user(ip, &handlereq, sizeof(handlereq))) {
 613		/*
 614		 * fput() will trigger the release() callback, so do not go onto
 615		 * the regular error cleanup path here.
 616		 */
 617		fput(file);
 618		put_unused_fd(fd);
 619		return -EFAULT;
 620	}
 621
 622	fd_install(fd, file);
 623
 624	dev_dbg(&gdev->dev, "registered chardev handle for %d lines\n",
 625		lh->numdescs);
 626
 627	return 0;
 628
 629out_put_unused_fd:
 630	put_unused_fd(fd);
 631out_free_descs:
 632	for (i = 0; i < count; i++)
 633		gpiod_free(lh->descs[i]);
 634	kfree(lh->label);
 635out_free_lh:
 636	kfree(lh);
 637	put_device(&gdev->dev);
 638	return ret;
 639}
 640
 641/*
 642 * GPIO line event management
 643 */
 644
 645/**
 646 * struct lineevent_state - contains the state of a userspace event
 647 * @gdev: the GPIO device the event pertains to
 648 * @label: consumer label used to tag descriptors
 649 * @desc: the GPIO descriptor held by this event
 650 * @eflags: the event flags this line was requested with
 651 * @irq: the interrupt that trigger in response to events on this GPIO
 652 * @wait: wait queue that handles blocking reads of events
 653 * @events: KFIFO for the GPIO events
 654 * @read_lock: mutex lock to protect reads from colliding with adding
 655 * new events to the FIFO
 656 * @timestamp: cache for the timestamp storing it between hardirq
 657 * and IRQ thread, used to bring the timestamp close to the actual
 658 * event
 659 */
 660struct lineevent_state {
 661	struct gpio_device *gdev;
 662	const char *label;
 663	struct gpio_desc *desc;
 664	u32 eflags;
 665	int irq;
 666	wait_queue_head_t wait;
 667	DECLARE_KFIFO(events, struct gpioevent_data, 16);
 668	struct mutex read_lock;
 669	u64 timestamp;
 670};
 671
 672#define GPIOEVENT_REQUEST_VALID_FLAGS \
 673	(GPIOEVENT_REQUEST_RISING_EDGE | \
 674	GPIOEVENT_REQUEST_FALLING_EDGE)
 675
 676static __poll_t lineevent_poll(struct file *filep,
 677				   struct poll_table_struct *wait)
 678{
 679	struct lineevent_state *le = filep->private_data;
 680	__poll_t events = 0;
 681
 682	poll_wait(filep, &le->wait, wait);
 683
 684	if (!kfifo_is_empty(&le->events))
 685		events = EPOLLIN | EPOLLRDNORM;
 686
 687	return events;
 688}
 689
 690
 691static ssize_t lineevent_read(struct file *filep,
 692			      char __user *buf,
 693			      size_t count,
 694			      loff_t *f_ps)
 695{
 696	struct lineevent_state *le = filep->private_data;
 697	unsigned int copied;
 698	int ret;
 699
 700	if (count < sizeof(struct gpioevent_data))
 701		return -EINVAL;
 702
 703	do {
 704		if (kfifo_is_empty(&le->events)) {
 705			if (filep->f_flags & O_NONBLOCK)
 706				return -EAGAIN;
 707
 708			ret = wait_event_interruptible(le->wait,
 709					!kfifo_is_empty(&le->events));
 710			if (ret)
 711				return ret;
 712		}
 713
 714		if (mutex_lock_interruptible(&le->read_lock))
 715			return -ERESTARTSYS;
 716		ret = kfifo_to_user(&le->events, buf, count, &copied);
 717		mutex_unlock(&le->read_lock);
 718
 719		if (ret)
 720			return ret;
 721
 722		/*
 723		 * If we couldn't read anything from the fifo (a different
 724		 * thread might have been faster) we either return -EAGAIN if
 725		 * the file descriptor is non-blocking, otherwise we go back to
 726		 * sleep and wait for more data to arrive.
 727		 */
 728		if (copied == 0 && (filep->f_flags & O_NONBLOCK))
 729			return -EAGAIN;
 730
 731	} while (copied == 0);
 732
 733	return copied;
 734}
 735
 736static int lineevent_release(struct inode *inode, struct file *filep)
 737{
 738	struct lineevent_state *le = filep->private_data;
 739	struct gpio_device *gdev = le->gdev;
 740
 741	free_irq(le->irq, le);
 742	gpiod_free(le->desc);
 743	kfree(le->label);
 744	kfree(le);
 745	put_device(&gdev->dev);
 746	return 0;
 747}
 748
 749static long lineevent_ioctl(struct file *filep, unsigned int cmd,
 750			    unsigned long arg)
 751{
 752	struct lineevent_state *le = filep->private_data;
 753	void __user *ip = (void __user *)arg;
 754	struct gpiohandle_data ghd;
 755
 756	/*
 757	 * We can get the value for an event line but not set it,
 758	 * because it is input by definition.
 759	 */
 760	if (cmd == GPIOHANDLE_GET_LINE_VALUES_IOCTL) {
 761		int val;
 762
 763		memset(&ghd, 0, sizeof(ghd));
 764
 765		val = gpiod_get_value_cansleep(le->desc);
 766		if (val < 0)
 767			return val;
 768		ghd.values[0] = val;
 769
 770		if (copy_to_user(ip, &ghd, sizeof(ghd)))
 771			return -EFAULT;
 772
 773		return 0;
 774	}
 775	return -EINVAL;
 776}
 777
 778#ifdef CONFIG_COMPAT
 779static long lineevent_ioctl_compat(struct file *filep, unsigned int cmd,
 780				   unsigned long arg)
 781{
 782	return lineevent_ioctl(filep, cmd, (unsigned long)compat_ptr(arg));
 783}
 784#endif
 785
 786static const struct file_operations lineevent_fileops = {
 787	.release = lineevent_release,
 788	.read = lineevent_read,
 789	.poll = lineevent_poll,
 790	.owner = THIS_MODULE,
 791	.llseek = noop_llseek,
 792	.unlocked_ioctl = lineevent_ioctl,
 793#ifdef CONFIG_COMPAT
 794	.compat_ioctl = lineevent_ioctl_compat,
 795#endif
 796};
 797
 798static irqreturn_t lineevent_irq_thread(int irq, void *p)
 799{
 800	struct lineevent_state *le = p;
 801	struct gpioevent_data ge;
 802	int ret, level;
 803
 804	/* Do not leak kernel stack to userspace */
 805	memset(&ge, 0, sizeof(ge));
 806
 807	ge.timestamp = le->timestamp;
 808	level = gpiod_get_value_cansleep(le->desc);
 809
 810	if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE
 811	    && le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE) {
 812		if (level)
 813			/* Emit low-to-high event */
 814			ge.id = GPIOEVENT_EVENT_RISING_EDGE;
 815		else
 816			/* Emit high-to-low event */
 817			ge.id = GPIOEVENT_EVENT_FALLING_EDGE;
 818	} else if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE && level) {
 819		/* Emit low-to-high event */
 820		ge.id = GPIOEVENT_EVENT_RISING_EDGE;
 821	} else if (le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE && !level) {
 822		/* Emit high-to-low event */
 823		ge.id = GPIOEVENT_EVENT_FALLING_EDGE;
 824	} else {
 825		return IRQ_NONE;
 826	}
 827
 828	ret = kfifo_put(&le->events, ge);
 829	if (ret != 0)
 830		wake_up_poll(&le->wait, EPOLLIN);
 831
 832	return IRQ_HANDLED;
 833}
 834
 835static irqreturn_t lineevent_irq_handler(int irq, void *p)
 836{
 837	struct lineevent_state *le = p;
 838
 839	/*
 840	 * Just store the timestamp in hardirq context so we get it as
 841	 * close in time as possible to the actual event.
 842	 */
 843	le->timestamp = ktime_get_real_ns();
 844
 845	return IRQ_WAKE_THREAD;
 846}
 847
 848static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 849{
 850	struct gpioevent_request eventreq;
 851	struct lineevent_state *le;
 852	struct gpio_desc *desc;
 853	struct file *file;
 854	u32 offset;
 855	u32 lflags;
 856	u32 eflags;
 857	int fd;
 858	int ret;
 859	int irqflags = 0;
 860
 861	if (copy_from_user(&eventreq, ip, sizeof(eventreq)))
 862		return -EFAULT;
 863
 864	le = kzalloc(sizeof(*le), GFP_KERNEL);
 865	if (!le)
 866		return -ENOMEM;
 867	le->gdev = gdev;
 868	get_device(&gdev->dev);
 869
 870	/* Make sure this is terminated */
 871	eventreq.consumer_label[sizeof(eventreq.consumer_label)-1] = '\0';
 872	if (strlen(eventreq.consumer_label)) {
 873		le->label = kstrdup(eventreq.consumer_label,
 874				    GFP_KERNEL);
 875		if (!le->label) {
 876			ret = -ENOMEM;
 877			goto out_free_le;
 878		}
 879	}
 880
 881	offset = eventreq.lineoffset;
 882	lflags = eventreq.handleflags;
 883	eflags = eventreq.eventflags;
 884
 885	if (offset >= gdev->ngpio) {
 886		ret = -EINVAL;
 887		goto out_free_label;
 888	}
 889
 890	/* Return an error if a unknown flag is set */
 891	if ((lflags & ~GPIOHANDLE_REQUEST_VALID_FLAGS) ||
 892	    (eflags & ~GPIOEVENT_REQUEST_VALID_FLAGS)) {
 893		ret = -EINVAL;
 894		goto out_free_label;
 895	}
 896
 897	/* This is just wrong: we don't look for events on output lines */
 898	if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
 899		ret = -EINVAL;
 900		goto out_free_label;
 901	}
 902
 903	desc = &gdev->descs[offset];
 904	ret = gpiod_request(desc, le->label);
 905	if (ret)
 906		goto out_free_label;
 907	le->desc = desc;
 908	le->eflags = eflags;
 909
 910	if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
 911		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
 912	if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN)
 913		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
 914	if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
 915		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
 916
 917	ret = gpiod_direction_input(desc);
 918	if (ret)
 919		goto out_free_desc;
 920
 921	le->irq = gpiod_to_irq(desc);
 922	if (le->irq <= 0) {
 923		ret = -ENODEV;
 924		goto out_free_desc;
 925	}
 926
 927	if (eflags & GPIOEVENT_REQUEST_RISING_EDGE)
 928		irqflags |= IRQF_TRIGGER_RISING;
 929	if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE)
 930		irqflags |= IRQF_TRIGGER_FALLING;
 931	irqflags |= IRQF_ONESHOT;
 932	irqflags |= IRQF_SHARED;
 933
 934	INIT_KFIFO(le->events);
 935	init_waitqueue_head(&le->wait);
 936	mutex_init(&le->read_lock);
 937
 938	/* Request a thread to read the events */
 939	ret = request_threaded_irq(le->irq,
 940			lineevent_irq_handler,
 941			lineevent_irq_thread,
 942			irqflags,
 943			le->label,
 944			le);
 945	if (ret)
 946		goto out_free_desc;
 947
 948	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
 949	if (fd < 0) {
 950		ret = fd;
 951		goto out_free_irq;
 952	}
 953
 954	file = anon_inode_getfile("gpio-event",
 955				  &lineevent_fileops,
 956				  le,
 957				  O_RDONLY | O_CLOEXEC);
 958	if (IS_ERR(file)) {
 959		ret = PTR_ERR(file);
 960		goto out_put_unused_fd;
 961	}
 962
 963	eventreq.fd = fd;
 964	if (copy_to_user(ip, &eventreq, sizeof(eventreq))) {
 965		/*
 966		 * fput() will trigger the release() callback, so do not go onto
 967		 * the regular error cleanup path here.
 968		 */
 969		fput(file);
 970		put_unused_fd(fd);
 971		return -EFAULT;
 972	}
 973
 974	fd_install(fd, file);
 975
 976	return 0;
 977
 978out_put_unused_fd:
 979	put_unused_fd(fd);
 980out_free_irq:
 981	free_irq(le->irq, le);
 982out_free_desc:
 983	gpiod_free(le->desc);
 984out_free_label:
 985	kfree(le->label);
 986out_free_le:
 987	kfree(le);
 988	put_device(&gdev->dev);
 989	return ret;
 990}
 991
 992/*
 993 * gpio_ioctl() - ioctl handler for the GPIO chardev
 994 */
 995static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 996{
 997	struct gpio_device *gdev = filp->private_data;
 998	struct gpio_chip *chip = gdev->chip;
 999	void __user *ip = (void __user *)arg;
1000
1001	/* We fail any subsequent ioctl():s when the chip is gone */
1002	if (!chip)
1003		return -ENODEV;
1004
1005	/* Fill in the struct and pass to userspace */
1006	if (cmd == GPIO_GET_CHIPINFO_IOCTL) {
1007		struct gpiochip_info chipinfo;
1008
1009		memset(&chipinfo, 0, sizeof(chipinfo));
1010
1011		strncpy(chipinfo.name, dev_name(&gdev->dev),
1012			sizeof(chipinfo.name));
1013		chipinfo.name[sizeof(chipinfo.name)-1] = '\0';
1014		strncpy(chipinfo.label, gdev->label,
1015			sizeof(chipinfo.label));
1016		chipinfo.label[sizeof(chipinfo.label)-1] = '\0';
1017		chipinfo.lines = gdev->ngpio;
1018		if (copy_to_user(ip, &chipinfo, sizeof(chipinfo)))
1019			return -EFAULT;
1020		return 0;
1021	} else if (cmd == GPIO_GET_LINEINFO_IOCTL) {
1022		struct gpioline_info lineinfo;
1023		struct gpio_desc *desc;
1024
1025		if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
1026			return -EFAULT;
1027		if (lineinfo.line_offset >= gdev->ngpio)
1028			return -EINVAL;
1029
1030		desc = &gdev->descs[lineinfo.line_offset];
1031		if (desc->name) {
1032			strncpy(lineinfo.name, desc->name,
1033				sizeof(lineinfo.name));
1034			lineinfo.name[sizeof(lineinfo.name)-1] = '\0';
1035		} else {
1036			lineinfo.name[0] = '\0';
1037		}
1038		if (desc->label) {
1039			strncpy(lineinfo.consumer, desc->label,
1040				sizeof(lineinfo.consumer));
1041			lineinfo.consumer[sizeof(lineinfo.consumer)-1] = '\0';
1042		} else {
1043			lineinfo.consumer[0] = '\0';
1044		}
1045
1046		/*
1047		 * Userspace only need to know that the kernel is using
1048		 * this GPIO so it can't use it.
1049		 */
1050		lineinfo.flags = 0;
1051		if (test_bit(FLAG_REQUESTED, &desc->flags) ||
1052		    test_bit(FLAG_IS_HOGGED, &desc->flags) ||
1053		    test_bit(FLAG_USED_AS_IRQ, &desc->flags) ||
1054		    test_bit(FLAG_EXPORT, &desc->flags) ||
1055		    test_bit(FLAG_SYSFS, &desc->flags))
1056			lineinfo.flags |= GPIOLINE_FLAG_KERNEL;
1057		if (test_bit(FLAG_IS_OUT, &desc->flags))
1058			lineinfo.flags |= GPIOLINE_FLAG_IS_OUT;
1059		if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
1060			lineinfo.flags |= GPIOLINE_FLAG_ACTIVE_LOW;
1061		if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
1062			lineinfo.flags |= GPIOLINE_FLAG_OPEN_DRAIN;
1063		if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
1064			lineinfo.flags |= GPIOLINE_FLAG_OPEN_SOURCE;
1065
1066		if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
1067			return -EFAULT;
1068		return 0;
1069	} else if (cmd == GPIO_GET_LINEHANDLE_IOCTL) {
1070		return linehandle_create(gdev, ip);
1071	} else if (cmd == GPIO_GET_LINEEVENT_IOCTL) {
1072		return lineevent_create(gdev, ip);
1073	}
1074	return -EINVAL;
1075}
1076
1077#ifdef CONFIG_COMPAT
1078static long gpio_ioctl_compat(struct file *filp, unsigned int cmd,
1079			      unsigned long arg)
1080{
1081	return gpio_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
1082}
1083#endif
1084
1085/**
1086 * gpio_chrdev_open() - open the chardev for ioctl operations
1087 * @inode: inode for this chardev
1088 * @filp: file struct for storing private data
1089 * Returns 0 on success
1090 */
1091static int gpio_chrdev_open(struct inode *inode, struct file *filp)
1092{
1093	struct gpio_device *gdev = container_of(inode->i_cdev,
1094					      struct gpio_device, chrdev);
1095
1096	/* Fail on open if the backing gpiochip is gone */
1097	if (!gdev->chip)
1098		return -ENODEV;
1099	get_device(&gdev->dev);
1100	filp->private_data = gdev;
1101
1102	return nonseekable_open(inode, filp);
1103}
1104
1105/**
1106 * gpio_chrdev_release() - close chardev after ioctl operations
1107 * @inode: inode for this chardev
1108 * @filp: file struct for storing private data
1109 * Returns 0 on success
1110 */
1111static int gpio_chrdev_release(struct inode *inode, struct file *filp)
1112{
1113	struct gpio_device *gdev = container_of(inode->i_cdev,
1114					      struct gpio_device, chrdev);
1115
 
 
1116	put_device(&gdev->dev);
1117	return 0;
1118}
1119
1120
1121static const struct file_operations gpio_fileops = {
1122	.release = gpio_chrdev_release,
1123	.open = gpio_chrdev_open,
1124	.owner = THIS_MODULE,
1125	.llseek = no_llseek,
1126	.unlocked_ioctl = gpio_ioctl,
1127#ifdef CONFIG_COMPAT
1128	.compat_ioctl = gpio_ioctl_compat,
1129#endif
1130};
1131
1132static void gpiodevice_release(struct device *dev)
1133{
1134	struct gpio_device *gdev = dev_get_drvdata(dev);
1135
1136	list_del(&gdev->list);
1137	ida_simple_remove(&gpio_ida, gdev->id);
1138	kfree_const(gdev->label);
1139	kfree(gdev->descs);
1140	kfree(gdev);
1141}
1142
1143static int gpiochip_setup_dev(struct gpio_device *gdev)
1144{
1145	int status;
1146
1147	cdev_init(&gdev->chrdev, &gpio_fileops);
1148	gdev->chrdev.owner = THIS_MODULE;
 
1149	gdev->dev.devt = MKDEV(MAJOR(gpio_devt), gdev->id);
1150
1151	status = cdev_device_add(&gdev->chrdev, &gdev->dev);
 
 
 
 
 
 
1152	if (status)
1153		return status;
1154
1155	chip_dbg(gdev->chip, "added GPIO chardev (%d:%d)\n",
1156		 MAJOR(gpio_devt), gdev->id);
1157
1158	status = gpiochip_sysfs_register(gdev);
1159	if (status)
1160		goto err_remove_device;
1161
1162	/* From this point, the .release() function cleans up gpio_device */
1163	gdev->dev.release = gpiodevice_release;
1164	pr_debug("%s: registered GPIOs %d to %d on device: %s (%s)\n",
1165		 __func__, gdev->base, gdev->base + gdev->ngpio - 1,
1166		 dev_name(&gdev->dev), gdev->chip->label ? : "generic");
1167
1168	return 0;
1169
1170err_remove_device:
1171	cdev_device_del(&gdev->chrdev, &gdev->dev);
 
 
1172	return status;
1173}
1174
1175static void gpiochip_setup_devs(void)
1176{
1177	struct gpio_device *gdev;
1178	int err;
1179
1180	list_for_each_entry(gdev, &gpio_devices, list) {
1181		err = gpiochip_setup_dev(gdev);
1182		if (err)
1183			pr_err("%s: Failed to initialize gpio device (%d)\n",
1184			       dev_name(&gdev->dev), err);
1185	}
1186}
1187
1188int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
1189			       struct lock_class_key *lock_key,
1190			       struct lock_class_key *request_key)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1191{
1192	unsigned long	flags;
1193	int		status = 0;
1194	unsigned	i;
1195	int		base = chip->base;
1196	struct gpio_device *gdev;
1197
1198	/*
1199	 * First: allocate and populate the internal stat container, and
1200	 * set up the struct device.
1201	 */
1202	gdev = kzalloc(sizeof(*gdev), GFP_KERNEL);
1203	if (!gdev)
1204		return -ENOMEM;
1205	gdev->dev.bus = &gpio_bus_type;
1206	gdev->chip = chip;
1207	chip->gpiodev = gdev;
1208	if (chip->parent) {
1209		gdev->dev.parent = chip->parent;
1210		gdev->dev.of_node = chip->parent->of_node;
1211	}
1212
1213#ifdef CONFIG_OF_GPIO
1214	/* If the gpiochip has an assigned OF node this takes precedence */
1215	if (chip->of_node)
1216		gdev->dev.of_node = chip->of_node;
1217#endif
1218
1219	gdev->id = ida_simple_get(&gpio_ida, 0, 0, GFP_KERNEL);
1220	if (gdev->id < 0) {
1221		status = gdev->id;
1222		goto err_free_gdev;
1223	}
1224	dev_set_name(&gdev->dev, "gpiochip%d", gdev->id);
1225	device_initialize(&gdev->dev);
1226	dev_set_drvdata(&gdev->dev, gdev);
1227	if (chip->parent && chip->parent->driver)
1228		gdev->owner = chip->parent->driver->owner;
1229	else if (chip->owner)
1230		/* TODO: remove chip->owner */
1231		gdev->owner = chip->owner;
1232	else
1233		gdev->owner = THIS_MODULE;
1234
1235	gdev->descs = kcalloc(chip->ngpio, sizeof(gdev->descs[0]), GFP_KERNEL);
1236	if (!gdev->descs) {
1237		status = -ENOMEM;
1238		goto err_free_gdev;
1239	}
1240
1241	if (chip->ngpio == 0) {
1242		chip_err(chip, "tried to insert a GPIO chip with zero lines\n");
1243		status = -EINVAL;
1244		goto err_free_descs;
1245	}
1246
1247	gdev->label = kstrdup_const(chip->label ?: "unknown", GFP_KERNEL);
 
 
 
1248	if (!gdev->label) {
1249		status = -ENOMEM;
1250		goto err_free_descs;
1251	}
1252
1253	gdev->ngpio = chip->ngpio;
1254	gdev->data = data;
1255
1256	spin_lock_irqsave(&gpio_lock, flags);
1257
1258	/*
1259	 * TODO: this allocates a Linux GPIO number base in the global
1260	 * GPIO numberspace for this chip. In the long run we want to
1261	 * get *rid* of this numberspace and use only descriptors, but
1262	 * it may be a pipe dream. It will not happen before we get rid
1263	 * of the sysfs interface anyways.
1264	 */
1265	if (base < 0) {
1266		base = gpiochip_find_base(chip->ngpio);
1267		if (base < 0) {
1268			status = base;
1269			spin_unlock_irqrestore(&gpio_lock, flags);
1270			goto err_free_label;
1271		}
1272		/*
1273		 * TODO: it should not be necessary to reflect the assigned
1274		 * base outside of the GPIO subsystem. Go over drivers and
1275		 * see if anyone makes use of this, else drop this and assign
1276		 * a poison instead.
1277		 */
1278		chip->base = base;
1279	}
1280	gdev->base = base;
1281
1282	status = gpiodev_add_to_list(gdev);
1283	if (status) {
1284		spin_unlock_irqrestore(&gpio_lock, flags);
1285		goto err_free_label;
1286	}
1287
1288	spin_unlock_irqrestore(&gpio_lock, flags);
1289
1290	for (i = 0; i < chip->ngpio; i++) {
1291		struct gpio_desc *desc = &gdev->descs[i];
1292
1293		desc->gdev = gdev;
 
 
 
 
 
 
 
 
1294
1295		/* REVISIT: most hardware initializes GPIOs as inputs (often
1296		 * with pullups enabled) so power usage is minimized. Linux
1297		 * code should set the gpio direction first thing; but until
1298		 * it does, and in case chip->get_direction is not set, we may
1299		 * expose the wrong direction in sysfs.
1300		 */
1301		desc->flags = !chip->direction_input ? (1 << FLAG_IS_OUT) : 0;
 
 
 
 
 
 
 
 
 
1302	}
1303
1304#ifdef CONFIG_PINCTRL
1305	INIT_LIST_HEAD(&gdev->pin_ranges);
1306#endif
1307
1308	status = gpiochip_set_desc_names(chip);
1309	if (status)
1310		goto err_remove_from_list;
1311
1312	status = gpiochip_irqchip_init_valid_mask(chip);
1313	if (status)
1314		goto err_remove_from_list;
1315
1316	status = gpiochip_init_valid_mask(chip);
1317	if (status)
1318		goto err_remove_irqchip_mask;
1319
1320	status = gpiochip_add_irqchip(chip, lock_key, request_key);
1321	if (status)
1322		goto err_remove_chip;
1323
1324	status = of_gpiochip_add(chip);
1325	if (status)
1326		goto err_remove_chip;
1327
1328	acpi_gpiochip_add(chip);
1329
1330	/*
1331	 * By first adding the chardev, and then adding the device,
1332	 * we get a device node entry in sysfs under
1333	 * /sys/bus/gpio/devices/gpiochipN/dev that can be used for
1334	 * coldplug of device nodes and other udev business.
1335	 * We can do this only if gpiolib has been initialized.
1336	 * Otherwise, defer until later.
1337	 */
1338	if (gpiolib_initialized) {
1339		status = gpiochip_setup_dev(gdev);
1340		if (status)
1341			goto err_remove_chip;
1342	}
1343	return 0;
1344
1345err_remove_chip:
1346	acpi_gpiochip_remove(chip);
1347	gpiochip_free_hogs(chip);
1348	of_gpiochip_remove(chip);
1349	gpiochip_free_valid_mask(chip);
1350err_remove_irqchip_mask:
1351	gpiochip_irqchip_free_valid_mask(chip);
1352err_remove_from_list:
1353	spin_lock_irqsave(&gpio_lock, flags);
1354	list_del(&gdev->list);
1355	spin_unlock_irqrestore(&gpio_lock, flags);
1356err_free_label:
1357	kfree_const(gdev->label);
1358err_free_descs:
1359	kfree(gdev->descs);
1360err_free_gdev:
1361	ida_simple_remove(&gpio_ida, gdev->id);
1362	/* failures here can mean systems won't boot... */
1363	pr_err("%s: GPIOs %d..%d (%s) failed to register\n", __func__,
1364	       gdev->base, gdev->base + gdev->ngpio - 1,
1365	       chip->label ? : "generic");
1366	kfree(gdev);
1367	return status;
1368}
1369EXPORT_SYMBOL_GPL(gpiochip_add_data_with_key);
1370
1371/**
1372 * gpiochip_get_data() - get per-subdriver data for the chip
1373 * @chip: GPIO chip
1374 *
1375 * Returns:
1376 * The per-subdriver data for the chip.
1377 */
1378void *gpiochip_get_data(struct gpio_chip *chip)
1379{
1380	return chip->gpiodev->data;
1381}
1382EXPORT_SYMBOL_GPL(gpiochip_get_data);
1383
1384/**
1385 * gpiochip_remove() - unregister a gpio_chip
1386 * @chip: the chip to unregister
1387 *
1388 * A gpio_chip with any GPIOs still requested may not be removed.
1389 */
1390void gpiochip_remove(struct gpio_chip *chip)
1391{
1392	struct gpio_device *gdev = chip->gpiodev;
1393	struct gpio_desc *desc;
1394	unsigned long	flags;
1395	unsigned	i;
1396	bool		requested = false;
1397
1398	/* FIXME: should the legacy sysfs handling be moved to gpio_device? */
1399	gpiochip_sysfs_unregister(gdev);
1400	gpiochip_free_hogs(chip);
1401	/* Numb the device, cancelling all outstanding operations */
1402	gdev->chip = NULL;
1403	gpiochip_irqchip_remove(chip);
1404	acpi_gpiochip_remove(chip);
1405	gpiochip_remove_pin_ranges(chip);
1406	of_gpiochip_remove(chip);
1407	gpiochip_free_valid_mask(chip);
1408	/*
1409	 * We accept no more calls into the driver from this point, so
1410	 * NULL the driver data pointer
1411	 */
1412	gdev->data = NULL;
1413
1414	spin_lock_irqsave(&gpio_lock, flags);
1415	for (i = 0; i < gdev->ngpio; i++) {
1416		desc = &gdev->descs[i];
1417		if (test_bit(FLAG_REQUESTED, &desc->flags))
1418			requested = true;
1419	}
1420	spin_unlock_irqrestore(&gpio_lock, flags);
1421
1422	if (requested)
1423		dev_crit(&gdev->dev,
1424			 "REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n");
1425
1426	/*
1427	 * The gpiochip side puts its use of the device to rest here:
1428	 * if there are no userspace clients, the chardev and device will
1429	 * be removed, else it will be dangling until the last user is
1430	 * gone.
1431	 */
1432	cdev_device_del(&gdev->chrdev, &gdev->dev);
 
1433	put_device(&gdev->dev);
1434}
1435EXPORT_SYMBOL_GPL(gpiochip_remove);
1436
1437static void devm_gpio_chip_release(struct device *dev, void *res)
1438{
1439	struct gpio_chip *chip = *(struct gpio_chip **)res;
1440
1441	gpiochip_remove(chip);
1442}
1443
1444static int devm_gpio_chip_match(struct device *dev, void *res, void *data)
1445
1446{
1447	struct gpio_chip **r = res;
1448
1449	if (!r || !*r) {
1450		WARN_ON(!r || !*r);
1451		return 0;
1452	}
1453
1454	return *r == data;
1455}
1456
1457/**
1458 * devm_gpiochip_add_data() - Resource manager gpiochip_add_data()
1459 * @dev: the device pointer on which irq_chip belongs to.
1460 * @chip: the chip to register, with chip->base initialized
1461 * @data: driver-private data associated with this chip
1462 *
1463 * Context: potentially before irqs will work
 
 
1464 *
1465 * The gpio chip automatically be released when the device is unbound.
1466 *
1467 * Returns:
1468 * A negative errno if the chip can't be registered, such as because the
1469 * chip->base is invalid or already associated with a different chip.
1470 * Otherwise it returns zero as a success code.
1471 */
1472int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *chip,
1473			   void *data)
1474{
1475	struct gpio_chip **ptr;
1476	int ret;
1477
1478	ptr = devres_alloc(devm_gpio_chip_release, sizeof(*ptr),
1479			     GFP_KERNEL);
1480	if (!ptr)
1481		return -ENOMEM;
1482
1483	ret = gpiochip_add_data(chip, data);
1484	if (ret < 0) {
1485		devres_free(ptr);
1486		return ret;
1487	}
1488
1489	*ptr = chip;
1490	devres_add(dev, ptr);
1491
1492	return 0;
1493}
1494EXPORT_SYMBOL_GPL(devm_gpiochip_add_data);
1495
1496/**
1497 * devm_gpiochip_remove() - Resource manager of gpiochip_remove()
1498 * @dev: device for which which resource was allocated
1499 * @chip: the chip to remove
1500 *
1501 * A gpio_chip with any GPIOs still requested may not be removed.
1502 */
1503void devm_gpiochip_remove(struct device *dev, struct gpio_chip *chip)
1504{
1505	int ret;
1506
1507	ret = devres_release(dev, devm_gpio_chip_release,
1508			     devm_gpio_chip_match, chip);
1509	WARN_ON(ret);
 
1510}
1511EXPORT_SYMBOL_GPL(devm_gpiochip_remove);
1512
1513/**
1514 * gpiochip_find() - iterator for locating a specific gpio_chip
1515 * @data: data to pass to match function
1516 * @match: Callback function to check gpio_chip
1517 *
1518 * Similar to bus_find_device.  It returns a reference to a gpio_chip as
1519 * determined by a user supplied @match callback.  The callback should return
1520 * 0 if the device doesn't match and non-zero if it does.  If the callback is
1521 * non-zero, this function will return to the caller and not iterate over any
1522 * more gpio_chips.
1523 */
1524struct gpio_chip *gpiochip_find(void *data,
1525				int (*match)(struct gpio_chip *chip,
1526					     void *data))
1527{
1528	struct gpio_device *gdev;
1529	struct gpio_chip *chip = NULL;
1530	unsigned long flags;
1531
1532	spin_lock_irqsave(&gpio_lock, flags);
1533	list_for_each_entry(gdev, &gpio_devices, list)
1534		if (gdev->chip && match(gdev->chip, data)) {
1535			chip = gdev->chip;
1536			break;
1537		}
1538
1539	spin_unlock_irqrestore(&gpio_lock, flags);
1540
1541	return chip;
1542}
1543EXPORT_SYMBOL_GPL(gpiochip_find);
1544
1545static int gpiochip_match_name(struct gpio_chip *chip, void *data)
1546{
1547	const char *name = data;
1548
1549	return !strcmp(chip->label, name);
1550}
1551
1552static struct gpio_chip *find_chip_by_name(const char *name)
1553{
1554	return gpiochip_find((void *)name, gpiochip_match_name);
1555}
1556
1557#ifdef CONFIG_GPIOLIB_IRQCHIP
1558
1559/*
1560 * The following is irqchip helper code for gpiochips.
1561 */
1562
1563static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip)
1564{
1565	if (!gpiochip->irq.need_valid_mask)
 
 
1566		return 0;
1567
1568	gpiochip->irq.valid_mask = gpiochip_allocate_mask(gpiochip);
1569	if (!gpiochip->irq.valid_mask)
 
1570		return -ENOMEM;
1571
 
 
 
 
1572	return 0;
1573}
1574
1575static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
1576{
1577	kfree(gpiochip->irq.valid_mask);
1578	gpiochip->irq.valid_mask = NULL;
1579}
1580
1581bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
1582				unsigned int offset)
1583{
1584	if (!gpiochip_line_is_valid(gpiochip, offset))
1585		return false;
1586	/* No mask means all valid */
1587	if (likely(!gpiochip->irq.valid_mask))
1588		return true;
1589	return test_bit(offset, gpiochip->irq.valid_mask);
1590}
1591EXPORT_SYMBOL_GPL(gpiochip_irqchip_irq_valid);
1592
1593/**
1594 * gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip
1595 * @gpiochip: the gpiochip to set the irqchip chain to
1596 * @irqchip: the irqchip to chain to the gpiochip
1597 * @parent_irq: the irq number corresponding to the parent IRQ for this
1598 * chained irqchip
1599 * @parent_handler: the parent interrupt handler for the accumulated IRQ
1600 * coming out of the gpiochip. If the interrupt is nested rather than
1601 * cascaded, pass NULL in this handler argument
1602 */
1603static void gpiochip_set_cascaded_irqchip(struct gpio_chip *gpiochip,
1604					  struct irq_chip *irqchip,
1605					  unsigned int parent_irq,
1606					  irq_flow_handler_t parent_handler)
1607{
1608	unsigned int offset;
1609
1610	if (!gpiochip->irq.domain) {
1611		chip_err(gpiochip, "called %s before setting up irqchip\n",
1612			 __func__);
1613		return;
1614	}
1615
1616	if (parent_handler) {
1617		if (gpiochip->can_sleep) {
1618			chip_err(gpiochip,
1619				 "you cannot have chained interrupts on a "
1620				 "chip that may sleep\n");
1621			return;
1622		}
1623		/*
1624		 * The parent irqchip is already using the chip_data for this
1625		 * irqchip, so our callbacks simply use the handler_data.
1626		 */
1627		irq_set_chained_handler_and_data(parent_irq, parent_handler,
1628						 gpiochip);
1629
1630		gpiochip->irq.parents = &parent_irq;
1631		gpiochip->irq.num_parents = 1;
1632	}
1633
1634	/* Set the parent IRQ for all affected IRQs */
1635	for (offset = 0; offset < gpiochip->ngpio; offset++) {
1636		if (!gpiochip_irqchip_irq_valid(gpiochip, offset))
1637			continue;
1638		irq_set_parent(irq_find_mapping(gpiochip->irq.domain, offset),
1639			       parent_irq);
1640	}
1641}
1642
1643/**
1644 * gpiochip_set_chained_irqchip() - connects a chained irqchip to a gpiochip
1645 * @gpiochip: the gpiochip to set the irqchip chain to
1646 * @irqchip: the irqchip to chain to the gpiochip
1647 * @parent_irq: the irq number corresponding to the parent IRQ for this
1648 * chained irqchip
1649 * @parent_handler: the parent interrupt handler for the accumulated IRQ
1650 * coming out of the gpiochip. If the interrupt is nested rather than
1651 * cascaded, pass NULL in this handler argument
1652 */
1653void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
1654				  struct irq_chip *irqchip,
1655				  unsigned int parent_irq,
1656				  irq_flow_handler_t parent_handler)
1657{
1658	if (gpiochip->irq.threaded) {
1659		chip_err(gpiochip, "tried to chain a threaded gpiochip\n");
1660		return;
1661	}
1662
1663	gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq,
1664				      parent_handler);
1665}
1666EXPORT_SYMBOL_GPL(gpiochip_set_chained_irqchip);
1667
1668/**
1669 * gpiochip_set_nested_irqchip() - connects a nested irqchip to a gpiochip
1670 * @gpiochip: the gpiochip to set the irqchip nested handler to
1671 * @irqchip: the irqchip to nest to the gpiochip
1672 * @parent_irq: the irq number corresponding to the parent IRQ for this
1673 * nested irqchip
1674 */
1675void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip,
1676				 struct irq_chip *irqchip,
1677				 unsigned int parent_irq)
1678{
 
 
 
 
1679	gpiochip_set_cascaded_irqchip(gpiochip, irqchip, parent_irq,
1680				      NULL);
1681}
1682EXPORT_SYMBOL_GPL(gpiochip_set_nested_irqchip);
1683
1684/**
1685 * gpiochip_irq_map() - maps an IRQ into a GPIO irqchip
1686 * @d: the irqdomain used by this irqchip
1687 * @irq: the global irq number used by this GPIO irqchip irq
1688 * @hwirq: the local IRQ/GPIO line offset on this gpiochip
1689 *
1690 * This function will set up the mapping for a certain IRQ line on a
1691 * gpiochip by assigning the gpiochip as chip data, and using the irqchip
1692 * stored inside the gpiochip.
1693 */
1694int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
1695		     irq_hw_number_t hwirq)
1696{
1697	struct gpio_chip *chip = d->host_data;
1698	int err = 0;
1699
1700	if (!gpiochip_irqchip_irq_valid(chip, hwirq))
1701		return -ENXIO;
1702
1703	irq_set_chip_data(irq, chip);
1704	/*
1705	 * This lock class tells lockdep that GPIO irqs are in a different
1706	 * category than their parents, so it won't report false recursion.
1707	 */
1708	irq_set_lockdep_class(irq, chip->irq.lock_key, chip->irq.request_key);
1709	irq_set_chip_and_handler(irq, chip->irq.chip, chip->irq.handler);
1710	/* Chips that use nested thread handlers have them marked */
1711	if (chip->irq.threaded)
1712		irq_set_nested_thread(irq, 1);
1713	irq_set_noprobe(irq);
1714
1715	if (chip->irq.num_parents == 1)
1716		err = irq_set_parent(irq, chip->irq.parents[0]);
1717	else if (chip->irq.map)
1718		err = irq_set_parent(irq, chip->irq.map[hwirq]);
1719
1720	if (err < 0)
1721		return err;
1722
1723	/*
1724	 * No set-up of the hardware will happen if IRQ_TYPE_NONE
1725	 * is passed as default type.
1726	 */
1727	if (chip->irq.default_type != IRQ_TYPE_NONE)
1728		irq_set_irq_type(irq, chip->irq.default_type);
1729
1730	return 0;
1731}
1732EXPORT_SYMBOL_GPL(gpiochip_irq_map);
1733
1734void gpiochip_irq_unmap(struct irq_domain *d, unsigned int irq)
1735{
1736	struct gpio_chip *chip = d->host_data;
1737
1738	if (chip->irq.threaded)
1739		irq_set_nested_thread(irq, 0);
1740	irq_set_chip_and_handler(irq, NULL, NULL);
1741	irq_set_chip_data(irq, NULL);
1742}
1743EXPORT_SYMBOL_GPL(gpiochip_irq_unmap);
1744
1745static const struct irq_domain_ops gpiochip_domain_ops = {
1746	.map	= gpiochip_irq_map,
1747	.unmap	= gpiochip_irq_unmap,
1748	/* Virtually all GPIO irqchips are twocell:ed */
1749	.xlate	= irq_domain_xlate_twocell,
1750};
1751
1752static int gpiochip_irq_reqres(struct irq_data *d)
1753{
1754	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
1755
1756	if (!try_module_get(chip->gpiodev->owner))
1757		return -ENODEV;
1758
1759	if (gpiochip_lock_as_irq(chip, d->hwirq)) {
1760		chip_err(chip,
1761			"unable to lock HW IRQ %lu for IRQ\n",
1762			d->hwirq);
1763		module_put(chip->gpiodev->owner);
1764		return -EINVAL;
1765	}
1766	return 0;
1767}
1768
1769static void gpiochip_irq_relres(struct irq_data *d)
1770{
1771	struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
1772
1773	gpiochip_unlock_as_irq(chip, d->hwirq);
1774	module_put(chip->gpiodev->owner);
1775}
1776
1777static int gpiochip_to_irq(struct gpio_chip *chip, unsigned offset)
1778{
1779	if (!gpiochip_irqchip_irq_valid(chip, offset))
1780		return -ENXIO;
1781
1782	return irq_create_mapping(chip->irq.domain, offset);
1783}
1784
1785/**
1786 * gpiochip_add_irqchip() - adds an IRQ chip to a GPIO chip
1787 * @gpiochip: the GPIO chip to add the IRQ chip to
1788 * @lock_key: lockdep class for IRQ lock
1789 * @request_key: lockdep class for IRQ request
1790 */
1791static int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
1792				struct lock_class_key *lock_key,
1793				struct lock_class_key *request_key)
1794{
1795	struct irq_chip *irqchip = gpiochip->irq.chip;
1796	const struct irq_domain_ops *ops;
1797	struct device_node *np;
1798	unsigned int type;
1799	unsigned int i;
1800
1801	if (!irqchip)
1802		return 0;
1803
1804	if (gpiochip->irq.parent_handler && gpiochip->can_sleep) {
1805		chip_err(gpiochip, "you cannot have chained interrupts on a "
1806			 "chip that may sleep\n");
1807		return -EINVAL;
1808	}
1809
1810	np = gpiochip->gpiodev->dev.of_node;
1811	type = gpiochip->irq.default_type;
1812
1813	/*
1814	 * Specifying a default trigger is a terrible idea if DT or ACPI is
1815	 * used to configure the interrupts, as you may end up with
1816	 * conflicting triggers. Tell the user, and reset to NONE.
1817	 */
1818	if (WARN(np && type != IRQ_TYPE_NONE,
1819		 "%s: Ignoring %u default trigger\n", np->full_name, type))
1820		type = IRQ_TYPE_NONE;
1821
1822	if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) {
1823		acpi_handle_warn(ACPI_HANDLE(gpiochip->parent),
1824				 "Ignoring %u default trigger\n", type);
1825		type = IRQ_TYPE_NONE;
1826	}
1827
1828	gpiochip->to_irq = gpiochip_to_irq;
1829	gpiochip->irq.default_type = type;
1830	gpiochip->irq.lock_key = lock_key;
1831	gpiochip->irq.request_key = request_key;
1832
1833	if (gpiochip->irq.domain_ops)
1834		ops = gpiochip->irq.domain_ops;
1835	else
1836		ops = &gpiochip_domain_ops;
1837
1838	gpiochip->irq.domain = irq_domain_add_simple(np, gpiochip->ngpio,
1839						     gpiochip->irq.first,
1840						     ops, gpiochip);
1841	if (!gpiochip->irq.domain)
1842		return -EINVAL;
1843
1844	/*
1845	 * It is possible for a driver to override this, but only if the
1846	 * alternative functions are both implemented.
1847	 */
1848	if (!irqchip->irq_request_resources &&
1849	    !irqchip->irq_release_resources) {
1850		irqchip->irq_request_resources = gpiochip_irq_reqres;
1851		irqchip->irq_release_resources = gpiochip_irq_relres;
1852	}
1853
1854	if (gpiochip->irq.parent_handler) {
1855		void *data = gpiochip->irq.parent_handler_data ?: gpiochip;
1856
1857		for (i = 0; i < gpiochip->irq.num_parents; i++) {
1858			/*
1859			 * The parent IRQ chip is already using the chip_data
1860			 * for this IRQ chip, so our callbacks simply use the
1861			 * handler_data.
1862			 */
1863			irq_set_chained_handler_and_data(gpiochip->irq.parents[i],
1864							 gpiochip->irq.parent_handler,
1865							 data);
1866		}
1867	}
1868
1869	acpi_gpiochip_request_interrupts(gpiochip);
1870
1871	return 0;
1872}
1873
1874/**
1875 * gpiochip_irqchip_remove() - removes an irqchip added to a gpiochip
1876 * @gpiochip: the gpiochip to remove the irqchip from
1877 *
1878 * This is called only from gpiochip_remove()
1879 */
1880static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
1881{
1882	unsigned int offset;
1883
1884	acpi_gpiochip_free_interrupts(gpiochip);
1885
1886	if (gpiochip->irq.chip && gpiochip->irq.parent_handler) {
1887		struct gpio_irq_chip *irq = &gpiochip->irq;
1888		unsigned int i;
1889
1890		for (i = 0; i < irq->num_parents; i++)
1891			irq_set_chained_handler_and_data(irq->parents[i],
1892							 NULL, NULL);
1893	}
1894
1895	/* Remove all IRQ mappings and delete the domain */
1896	if (gpiochip->irq.domain) {
1897		unsigned int irq;
1898
1899		for (offset = 0; offset < gpiochip->ngpio; offset++) {
1900			if (!gpiochip_irqchip_irq_valid(gpiochip, offset))
1901				continue;
1902
1903			irq = irq_find_mapping(gpiochip->irq.domain, offset);
1904			irq_dispose_mapping(irq);
1905		}
1906
1907		irq_domain_remove(gpiochip->irq.domain);
1908	}
1909
1910	if (gpiochip->irq.chip) {
1911		gpiochip->irq.chip->irq_request_resources = NULL;
1912		gpiochip->irq.chip->irq_release_resources = NULL;
1913		gpiochip->irq.chip = NULL;
1914	}
1915
1916	gpiochip_irqchip_free_valid_mask(gpiochip);
1917}
1918
1919/**
1920 * gpiochip_irqchip_add_key() - adds an irqchip to a gpiochip
1921 * @gpiochip: the gpiochip to add the irqchip to
1922 * @irqchip: the irqchip to add to the gpiochip
1923 * @first_irq: if not dynamically assigned, the base (first) IRQ to
1924 * allocate gpiochip irqs from
1925 * @handler: the irq handler to use (often a predefined irq core function)
1926 * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE
1927 * to have the core avoid setting up any default type in the hardware.
1928 * @threaded: whether this irqchip uses a nested thread handler
1929 * @lock_key: lockdep class for IRQ lock
1930 * @request_key: lockdep class for IRQ request
1931 *
1932 * This function closely associates a certain irqchip with a certain
1933 * gpiochip, providing an irq domain to translate the local IRQs to
1934 * global irqs in the gpiolib core, and making sure that the gpiochip
1935 * is passed as chip data to all related functions. Driver callbacks
1936 * need to use gpiochip_get_data() to get their local state containers back
1937 * from the gpiochip passed as chip data. An irqdomain will be stored
1938 * in the gpiochip that shall be used by the driver to handle IRQ number
1939 * translation. The gpiochip will need to be initialized and registered
1940 * before calling this function.
1941 *
1942 * This function will handle two cell:ed simple IRQs and assumes all
1943 * the pins on the gpiochip can generate a unique IRQ. Everything else
1944 * need to be open coded.
1945 */
1946int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip,
1947			     struct irq_chip *irqchip,
1948			     unsigned int first_irq,
1949			     irq_flow_handler_t handler,
1950			     unsigned int type,
1951			     bool threaded,
1952			     struct lock_class_key *lock_key,
1953			     struct lock_class_key *request_key)
1954{
1955	struct device_node *of_node;
 
 
 
1956
1957	if (!gpiochip || !irqchip)
1958		return -EINVAL;
1959
1960	if (!gpiochip->parent) {
1961		pr_err("missing gpiochip .dev parent pointer\n");
1962		return -EINVAL;
1963	}
1964	gpiochip->irq.threaded = threaded;
1965	of_node = gpiochip->parent->of_node;
1966#ifdef CONFIG_OF_GPIO
1967	/*
1968	 * If the gpiochip has an assigned OF node this takes precedence
1969	 * FIXME: get rid of this and use gpiochip->parent->of_node
1970	 * everywhere
1971	 */
1972	if (gpiochip->of_node)
1973		of_node = gpiochip->of_node;
1974#endif
1975	/*
1976	 * Specifying a default trigger is a terrible idea if DT or ACPI is
1977	 * used to configure the interrupts, as you may end-up with
1978	 * conflicting triggers. Tell the user, and reset to NONE.
1979	 */
1980	if (WARN(of_node && type != IRQ_TYPE_NONE,
1981		 "%pOF: Ignoring %d default trigger\n", of_node, type))
1982		type = IRQ_TYPE_NONE;
1983	if (has_acpi_companion(gpiochip->parent) && type != IRQ_TYPE_NONE) {
1984		acpi_handle_warn(ACPI_HANDLE(gpiochip->parent),
1985				 "Ignoring %d default trigger\n", type);
1986		type = IRQ_TYPE_NONE;
1987	}
1988
1989	gpiochip->irq.chip = irqchip;
1990	gpiochip->irq.handler = handler;
1991	gpiochip->irq.default_type = type;
1992	gpiochip->to_irq = gpiochip_to_irq;
1993	gpiochip->irq.lock_key = lock_key;
1994	gpiochip->irq.request_key = request_key;
1995	gpiochip->irq.domain = irq_domain_add_simple(of_node,
1996					gpiochip->ngpio, first_irq,
1997					&gpiochip_domain_ops, gpiochip);
1998	if (!gpiochip->irq.domain) {
1999		gpiochip->irq.chip = NULL;
2000		return -EINVAL;
2001	}
2002
2003	/*
2004	 * It is possible for a driver to override this, but only if the
2005	 * alternative functions are both implemented.
2006	 */
2007	if (!irqchip->irq_request_resources &&
2008	    !irqchip->irq_release_resources) {
2009		irqchip->irq_request_resources = gpiochip_irq_reqres;
2010		irqchip->irq_release_resources = gpiochip_irq_relres;
2011	}
2012
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2013	acpi_gpiochip_request_interrupts(gpiochip);
2014
2015	return 0;
2016}
2017EXPORT_SYMBOL_GPL(gpiochip_irqchip_add_key);
2018
2019#else /* CONFIG_GPIOLIB_IRQCHIP */
2020
2021static inline int gpiochip_add_irqchip(struct gpio_chip *gpiochip,
2022				       struct lock_class_key *lock_key,
2023				       struct lock_class_key *request_key)
2024{
2025	return 0;
2026}
2027
2028static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) {}
2029static inline int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip)
2030{
2031	return 0;
2032}
2033static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
2034{ }
2035
2036#endif /* CONFIG_GPIOLIB_IRQCHIP */
2037
2038/**
2039 * gpiochip_generic_request() - request the gpio function for a pin
2040 * @chip: the gpiochip owning the GPIO
2041 * @offset: the offset of the GPIO to request for GPIO function
2042 */
2043int gpiochip_generic_request(struct gpio_chip *chip, unsigned offset)
2044{
2045	return pinctrl_gpio_request(chip->gpiodev->base + offset);
2046}
2047EXPORT_SYMBOL_GPL(gpiochip_generic_request);
2048
2049/**
2050 * gpiochip_generic_free() - free the gpio function from a pin
2051 * @chip: the gpiochip to request the gpio function for
2052 * @offset: the offset of the GPIO to free from GPIO function
2053 */
2054void gpiochip_generic_free(struct gpio_chip *chip, unsigned offset)
2055{
2056	pinctrl_gpio_free(chip->gpiodev->base + offset);
2057}
2058EXPORT_SYMBOL_GPL(gpiochip_generic_free);
2059
2060/**
2061 * gpiochip_generic_config() - apply configuration for a pin
2062 * @chip: the gpiochip owning the GPIO
2063 * @offset: the offset of the GPIO to apply the configuration
2064 * @config: the configuration to be applied
2065 */
2066int gpiochip_generic_config(struct gpio_chip *chip, unsigned offset,
2067			    unsigned long config)
2068{
2069	return pinctrl_gpio_set_config(chip->gpiodev->base + offset, config);
2070}
2071EXPORT_SYMBOL_GPL(gpiochip_generic_config);
2072
2073#ifdef CONFIG_PINCTRL
2074
2075/**
2076 * gpiochip_add_pingroup_range() - add a range for GPIO <-> pin mapping
2077 * @chip: the gpiochip to add the range for
2078 * @pctldev: the pin controller to map to
2079 * @gpio_offset: the start offset in the current gpio_chip number space
2080 * @pin_group: name of the pin group inside the pin controller
2081 */
2082int gpiochip_add_pingroup_range(struct gpio_chip *chip,
2083			struct pinctrl_dev *pctldev,
2084			unsigned int gpio_offset, const char *pin_group)
2085{
2086	struct gpio_pin_range *pin_range;
2087	struct gpio_device *gdev = chip->gpiodev;
2088	int ret;
2089
2090	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
2091	if (!pin_range) {
2092		chip_err(chip, "failed to allocate pin ranges\n");
2093		return -ENOMEM;
2094	}
2095
2096	/* Use local offset as range ID */
2097	pin_range->range.id = gpio_offset;
2098	pin_range->range.gc = chip;
2099	pin_range->range.name = chip->label;
2100	pin_range->range.base = gdev->base + gpio_offset;
2101	pin_range->pctldev = pctldev;
2102
2103	ret = pinctrl_get_group_pins(pctldev, pin_group,
2104					&pin_range->range.pins,
2105					&pin_range->range.npins);
2106	if (ret < 0) {
2107		kfree(pin_range);
2108		return ret;
2109	}
2110
2111	pinctrl_add_gpio_range(pctldev, &pin_range->range);
2112
2113	chip_dbg(chip, "created GPIO range %d->%d ==> %s PINGRP %s\n",
2114		 gpio_offset, gpio_offset + pin_range->range.npins - 1,
2115		 pinctrl_dev_get_devname(pctldev), pin_group);
2116
2117	list_add_tail(&pin_range->node, &gdev->pin_ranges);
2118
2119	return 0;
2120}
2121EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range);
2122
2123/**
2124 * gpiochip_add_pin_range() - add a range for GPIO <-> pin mapping
2125 * @chip: the gpiochip to add the range for
2126 * @pinctl_name: the dev_name() of the pin controller to map to
2127 * @gpio_offset: the start offset in the current gpio_chip number space
2128 * @pin_offset: the start offset in the pin controller number space
2129 * @npins: the number of pins from the offset of each pin space (GPIO and
2130 *	pin controller) to accumulate in this range
2131 *
2132 * Returns:
2133 * 0 on success, or a negative error-code on failure.
2134 */
2135int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
2136			   unsigned int gpio_offset, unsigned int pin_offset,
2137			   unsigned int npins)
2138{
2139	struct gpio_pin_range *pin_range;
2140	struct gpio_device *gdev = chip->gpiodev;
2141	int ret;
2142
2143	pin_range = kzalloc(sizeof(*pin_range), GFP_KERNEL);
2144	if (!pin_range) {
2145		chip_err(chip, "failed to allocate pin ranges\n");
2146		return -ENOMEM;
2147	}
2148
2149	/* Use local offset as range ID */
2150	pin_range->range.id = gpio_offset;
2151	pin_range->range.gc = chip;
2152	pin_range->range.name = chip->label;
2153	pin_range->range.base = gdev->base + gpio_offset;
2154	pin_range->range.pin_base = pin_offset;
2155	pin_range->range.npins = npins;
2156	pin_range->pctldev = pinctrl_find_and_add_gpio_range(pinctl_name,
2157			&pin_range->range);
2158	if (IS_ERR(pin_range->pctldev)) {
2159		ret = PTR_ERR(pin_range->pctldev);
2160		chip_err(chip, "could not create pin range\n");
2161		kfree(pin_range);
2162		return ret;
2163	}
2164	chip_dbg(chip, "created GPIO range %d->%d ==> %s PIN %d->%d\n",
2165		 gpio_offset, gpio_offset + npins - 1,
2166		 pinctl_name,
2167		 pin_offset, pin_offset + npins - 1);
2168
2169	list_add_tail(&pin_range->node, &gdev->pin_ranges);
2170
2171	return 0;
2172}
2173EXPORT_SYMBOL_GPL(gpiochip_add_pin_range);
2174
2175/**
2176 * gpiochip_remove_pin_ranges() - remove all the GPIO <-> pin mappings
2177 * @chip: the chip to remove all the mappings for
2178 */
2179void gpiochip_remove_pin_ranges(struct gpio_chip *chip)
2180{
2181	struct gpio_pin_range *pin_range, *tmp;
2182	struct gpio_device *gdev = chip->gpiodev;
2183
2184	list_for_each_entry_safe(pin_range, tmp, &gdev->pin_ranges, node) {
2185		list_del(&pin_range->node);
2186		pinctrl_remove_gpio_range(pin_range->pctldev,
2187				&pin_range->range);
2188		kfree(pin_range);
2189	}
2190}
2191EXPORT_SYMBOL_GPL(gpiochip_remove_pin_ranges);
2192
2193#endif /* CONFIG_PINCTRL */
2194
2195/* These "optional" allocation calls help prevent drivers from stomping
2196 * on each other, and help provide better diagnostics in debugfs.
2197 * They're called even less than the "set direction" calls.
2198 */
2199static int gpiod_request_commit(struct gpio_desc *desc, const char *label)
2200{
2201	struct gpio_chip	*chip = desc->gdev->chip;
2202	int			status;
2203	unsigned long		flags;
2204
2205	spin_lock_irqsave(&gpio_lock, flags);
2206
2207	/* NOTE:  gpio_request() can be called in early boot,
2208	 * before IRQs are enabled, for non-sleeping (SOC) GPIOs.
2209	 */
2210
2211	if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
2212		desc_set_label(desc, label ? : "?");
2213		status = 0;
2214	} else {
2215		status = -EBUSY;
2216		goto done;
2217	}
2218
2219	if (chip->request) {
2220		/* chip->request may sleep */
2221		spin_unlock_irqrestore(&gpio_lock, flags);
2222		status = chip->request(chip, gpio_chip_hwgpio(desc));
2223		spin_lock_irqsave(&gpio_lock, flags);
2224
2225		if (status < 0) {
2226			desc_set_label(desc, NULL);
2227			clear_bit(FLAG_REQUESTED, &desc->flags);
2228			goto done;
2229		}
2230	}
2231	if (chip->get_direction) {
2232		/* chip->get_direction may sleep */
2233		spin_unlock_irqrestore(&gpio_lock, flags);
2234		gpiod_get_direction(desc);
2235		spin_lock_irqsave(&gpio_lock, flags);
2236	}
2237done:
2238	spin_unlock_irqrestore(&gpio_lock, flags);
2239	return status;
2240}
2241
2242/*
2243 * This descriptor validation needs to be inserted verbatim into each
2244 * function taking a descriptor, so we need to use a preprocessor
2245 * macro to avoid endless duplication. If the desc is NULL it is an
2246 * optional GPIO and calls should just bail out.
2247 */
2248static int validate_desc(const struct gpio_desc *desc, const char *func)
2249{
2250	if (!desc)
2251		return 0;
2252	if (IS_ERR(desc)) {
2253		pr_warn("%s: invalid GPIO (errorpointer)\n", func);
2254		return PTR_ERR(desc);
2255	}
2256	if (!desc->gdev) {
2257		pr_warn("%s: invalid GPIO (no device)\n", func);
2258		return -EINVAL;
2259	}
2260	if (!desc->gdev->chip) {
2261		dev_warn(&desc->gdev->dev,
2262			 "%s: backing chip is gone\n", func);
2263		return 0;
2264	}
2265	return 1;
2266}
2267
2268#define VALIDATE_DESC(desc) do { \
2269	int __valid = validate_desc(desc, __func__); \
2270	if (__valid <= 0) \
2271		return __valid; \
2272	} while (0)
 
 
 
 
 
 
 
 
 
 
 
2273
2274#define VALIDATE_DESC_VOID(desc) do { \
2275	int __valid = validate_desc(desc, __func__); \
2276	if (__valid <= 0) \
 
 
2277		return; \
2278	} while (0)
 
 
 
 
 
 
 
 
 
 
2279
2280int gpiod_request(struct gpio_desc *desc, const char *label)
2281{
2282	int status = -EPROBE_DEFER;
2283	struct gpio_device *gdev;
2284
2285	VALIDATE_DESC(desc);
2286	gdev = desc->gdev;
2287
2288	if (try_module_get(gdev->owner)) {
2289		status = gpiod_request_commit(desc, label);
2290		if (status < 0)
2291			module_put(gdev->owner);
2292		else
2293			get_device(&gdev->dev);
2294	}
2295
2296	if (status)
2297		gpiod_dbg(desc, "%s: status %d\n", __func__, status);
2298
2299	return status;
2300}
2301
2302static bool gpiod_free_commit(struct gpio_desc *desc)
2303{
2304	bool			ret = false;
2305	unsigned long		flags;
2306	struct gpio_chip	*chip;
2307
2308	might_sleep();
2309
2310	gpiod_unexport(desc);
2311
2312	spin_lock_irqsave(&gpio_lock, flags);
2313
2314	chip = desc->gdev->chip;
2315	if (chip && test_bit(FLAG_REQUESTED, &desc->flags)) {
2316		if (chip->free) {
2317			spin_unlock_irqrestore(&gpio_lock, flags);
2318			might_sleep_if(chip->can_sleep);
2319			chip->free(chip, gpio_chip_hwgpio(desc));
2320			spin_lock_irqsave(&gpio_lock, flags);
2321		}
2322		desc_set_label(desc, NULL);
2323		clear_bit(FLAG_ACTIVE_LOW, &desc->flags);
2324		clear_bit(FLAG_REQUESTED, &desc->flags);
2325		clear_bit(FLAG_OPEN_DRAIN, &desc->flags);
2326		clear_bit(FLAG_OPEN_SOURCE, &desc->flags);
2327		clear_bit(FLAG_IS_HOGGED, &desc->flags);
2328		ret = true;
2329	}
2330
2331	spin_unlock_irqrestore(&gpio_lock, flags);
2332	return ret;
2333}
2334
2335void gpiod_free(struct gpio_desc *desc)
2336{
2337	if (desc && desc->gdev && gpiod_free_commit(desc)) {
2338		module_put(desc->gdev->owner);
2339		put_device(&desc->gdev->dev);
2340	} else {
2341		WARN_ON(extra_checks);
2342	}
2343}
2344
2345/**
2346 * gpiochip_is_requested - return string iff signal was requested
2347 * @chip: controller managing the signal
2348 * @offset: of signal within controller's 0..(ngpio - 1) range
2349 *
2350 * Returns NULL if the GPIO is not currently requested, else a string.
2351 * The string returned is the label passed to gpio_request(); if none has been
2352 * passed it is a meaningless, non-NULL constant.
2353 *
2354 * This function is for use by GPIO controller drivers.  The label can
2355 * help with diagnostics, and knowing that the signal is used as a GPIO
2356 * can help avoid accidentally multiplexing it to another controller.
2357 */
2358const char *gpiochip_is_requested(struct gpio_chip *chip, unsigned offset)
2359{
2360	struct gpio_desc *desc;
2361
2362	if (offset >= chip->ngpio)
2363		return NULL;
2364
2365	desc = &chip->gpiodev->descs[offset];
2366
2367	if (test_bit(FLAG_REQUESTED, &desc->flags) == 0)
2368		return NULL;
2369	return desc->label;
2370}
2371EXPORT_SYMBOL_GPL(gpiochip_is_requested);
2372
2373/**
2374 * gpiochip_request_own_desc - Allow GPIO chip to request its own descriptor
2375 * @chip: GPIO chip
2376 * @hwnum: hardware number of the GPIO for which to request the descriptor
2377 * @label: label for the GPIO
2378 *
2379 * Function allows GPIO chip drivers to request and use their own GPIO
2380 * descriptors via gpiolib API. Difference to gpiod_request() is that this
2381 * function will not increase reference count of the GPIO chip module. This
2382 * allows the GPIO chip module to be unloaded as needed (we assume that the
2383 * GPIO chip driver handles freeing the GPIOs it has requested).
2384 *
2385 * Returns:
2386 * A pointer to the GPIO descriptor, or an ERR_PTR()-encoded negative error
2387 * code on failure.
2388 */
2389struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum,
2390					    const char *label)
2391{
2392	struct gpio_desc *desc = gpiochip_get_desc(chip, hwnum);
2393	int err;
2394
2395	if (IS_ERR(desc)) {
2396		chip_err(chip, "failed to get GPIO descriptor\n");
2397		return desc;
2398	}
2399
2400	err = gpiod_request_commit(desc, label);
2401	if (err < 0)
2402		return ERR_PTR(err);
2403
2404	return desc;
2405}
2406EXPORT_SYMBOL_GPL(gpiochip_request_own_desc);
2407
2408/**
2409 * gpiochip_free_own_desc - Free GPIO requested by the chip driver
2410 * @desc: GPIO descriptor to free
2411 *
2412 * Function frees the given GPIO requested previously with
2413 * gpiochip_request_own_desc().
2414 */
2415void gpiochip_free_own_desc(struct gpio_desc *desc)
2416{
2417	if (desc)
2418		gpiod_free_commit(desc);
2419}
2420EXPORT_SYMBOL_GPL(gpiochip_free_own_desc);
2421
2422/*
2423 * Drivers MUST set GPIO direction before making get/set calls.  In
2424 * some cases this is done in early boot, before IRQs are enabled.
2425 *
2426 * As a rule these aren't called more than once (except for drivers
2427 * using the open-drain emulation idiom) so these are natural places
2428 * to accumulate extra debugging checks.  Note that we can't (yet)
2429 * rely on gpio_request() having been called beforehand.
2430 */
2431
2432/**
2433 * gpiod_direction_input - set the GPIO direction to input
2434 * @desc:	GPIO to set to input
2435 *
2436 * Set the direction of the passed GPIO to input, such as gpiod_get_value() can
2437 * be called safely on it.
2438 *
2439 * Return 0 in case of success, else an error code.
2440 */
2441int gpiod_direction_input(struct gpio_desc *desc)
2442{
2443	struct gpio_chip	*chip;
2444	int			status = -EINVAL;
2445
2446	VALIDATE_DESC(desc);
2447	chip = desc->gdev->chip;
2448
2449	if (!chip->get || !chip->direction_input) {
2450		gpiod_warn(desc,
2451			"%s: missing get() or direction_input() operations\n",
2452			__func__);
2453		return -EIO;
2454	}
2455
2456	status = chip->direction_input(chip, gpio_chip_hwgpio(desc));
2457	if (status == 0)
2458		clear_bit(FLAG_IS_OUT, &desc->flags);
2459
2460	trace_gpio_direction(desc_to_gpio(desc), 1, status);
2461
2462	return status;
2463}
2464EXPORT_SYMBOL_GPL(gpiod_direction_input);
2465
2466static int gpio_set_drive_single_ended(struct gpio_chip *gc, unsigned offset,
2467				       enum pin_config_param mode)
2468{
2469	unsigned long config = { PIN_CONF_PACKED(mode, 0) };
2470
2471	return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP;
2472}
2473
2474static int gpiod_direction_output_raw_commit(struct gpio_desc *desc, int value)
2475{
2476	struct gpio_chip *gc = desc->gdev->chip;
2477	int val = !!value;
2478	int ret;
2479
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2480	if (!gc->set || !gc->direction_output) {
2481		gpiod_warn(desc,
2482		       "%s: missing set() or direction_output() operations\n",
2483		       __func__);
2484		return -EIO;
2485	}
2486
2487	ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), val);
2488	if (!ret)
2489		set_bit(FLAG_IS_OUT, &desc->flags);
2490	trace_gpio_value(desc_to_gpio(desc), 0, val);
2491	trace_gpio_direction(desc_to_gpio(desc), 0, ret);
2492	return ret;
2493}
2494
2495/**
2496 * gpiod_direction_output_raw - set the GPIO direction to output
2497 * @desc:	GPIO to set to output
2498 * @value:	initial output value of the GPIO
2499 *
2500 * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
2501 * be called safely on it. The initial value of the output must be specified
2502 * as raw value on the physical line without regard for the ACTIVE_LOW status.
2503 *
2504 * Return 0 in case of success, else an error code.
2505 */
2506int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
2507{
2508	VALIDATE_DESC(desc);
2509	return gpiod_direction_output_raw_commit(desc, value);
2510}
2511EXPORT_SYMBOL_GPL(gpiod_direction_output_raw);
2512
2513/**
2514 * gpiod_direction_output - set the GPIO direction to output
2515 * @desc:	GPIO to set to output
2516 * @value:	initial output value of the GPIO
2517 *
2518 * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
2519 * be called safely on it. The initial value of the output must be specified
2520 * as the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
2521 * account.
2522 *
2523 * Return 0 in case of success, else an error code.
2524 */
2525int gpiod_direction_output(struct gpio_desc *desc, int value)
2526{
2527	struct gpio_chip *gc;
2528	int ret;
2529
2530	VALIDATE_DESC(desc);
2531	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
2532		value = !value;
2533	else
2534		value = !!value;
2535
2536	/* GPIOs used for IRQs shall not be set as output */
2537	if (test_bit(FLAG_USED_AS_IRQ, &desc->flags)) {
2538		gpiod_err(desc,
2539			  "%s: tried to set a GPIO tied to an IRQ as output\n",
2540			  __func__);
2541		return -EIO;
2542	}
2543
2544	gc = desc->gdev->chip;
2545	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
2546		/* First see if we can enable open drain in hardware */
2547		ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
2548						  PIN_CONFIG_DRIVE_OPEN_DRAIN);
2549		if (!ret)
2550			goto set_output_value;
2551		/* Emulate open drain by not actively driving the line high */
2552		if (value)
2553			return gpiod_direction_input(desc);
2554	}
2555	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
2556		ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
2557						  PIN_CONFIG_DRIVE_OPEN_SOURCE);
2558		if (!ret)
2559			goto set_output_value;
2560		/* Emulate open source by not actively driving the line low */
2561		if (!value)
2562			return gpiod_direction_input(desc);
2563	} else {
2564		gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
2565					    PIN_CONFIG_DRIVE_PUSH_PULL);
2566	}
2567
2568set_output_value:
2569	return gpiod_direction_output_raw_commit(desc, value);
2570}
2571EXPORT_SYMBOL_GPL(gpiod_direction_output);
2572
2573/**
2574 * gpiod_set_debounce - sets @debounce time for a GPIO
2575 * @desc: descriptor of the GPIO for which to set debounce time
2576 * @debounce: debounce time in microseconds
2577 *
2578 * Returns:
2579 * 0 on success, %-ENOTSUPP if the controller doesn't support setting the
2580 * debounce time.
2581 */
2582int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
2583{
2584	struct gpio_chip	*chip;
2585	unsigned long		config;
2586
2587	VALIDATE_DESC(desc);
2588	chip = desc->gdev->chip;
2589	if (!chip->set || !chip->set_config) {
2590		gpiod_dbg(desc,
2591			  "%s: missing set() or set_config() operations\n",
2592			  __func__);
2593		return -ENOTSUPP;
2594	}
2595
2596	config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce);
2597	return chip->set_config(chip, gpio_chip_hwgpio(desc), config);
2598}
2599EXPORT_SYMBOL_GPL(gpiod_set_debounce);
2600
2601/**
2602 * gpiod_set_transitory - Lose or retain GPIO state on suspend or reset
2603 * @desc: descriptor of the GPIO for which to configure persistence
2604 * @transitory: True to lose state on suspend or reset, false for persistence
2605 *
2606 * Returns:
2607 * 0 on success, otherwise a negative error code.
2608 */
2609int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
2610{
2611	struct gpio_chip *chip;
2612	unsigned long packed;
2613	int gpio;
2614	int rc;
2615
2616	VALIDATE_DESC(desc);
2617	/*
2618	 * Handle FLAG_TRANSITORY first, enabling queries to gpiolib for
2619	 * persistence state.
2620	 */
2621	if (transitory)
2622		set_bit(FLAG_TRANSITORY, &desc->flags);
2623	else
2624		clear_bit(FLAG_TRANSITORY, &desc->flags);
2625
2626	/* If the driver supports it, set the persistence state now */
2627	chip = desc->gdev->chip;
2628	if (!chip->set_config)
2629		return 0;
2630
2631	packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE,
2632					  !transitory);
2633	gpio = gpio_chip_hwgpio(desc);
2634	rc = chip->set_config(chip, gpio, packed);
2635	if (rc == -ENOTSUPP) {
2636		dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n",
2637				gpio);
2638		return 0;
2639	}
2640
2641	return rc;
2642}
2643EXPORT_SYMBOL_GPL(gpiod_set_transitory);
2644
2645/**
2646 * gpiod_is_active_low - test whether a GPIO is active-low or not
2647 * @desc: the gpio descriptor to test
2648 *
2649 * Returns 1 if the GPIO is active-low, 0 otherwise.
2650 */
2651int gpiod_is_active_low(const struct gpio_desc *desc)
2652{
2653	VALIDATE_DESC(desc);
2654	return test_bit(FLAG_ACTIVE_LOW, &desc->flags);
2655}
2656EXPORT_SYMBOL_GPL(gpiod_is_active_low);
2657
2658/* I/O calls are only valid after configuration completed; the relevant
2659 * "is this a valid GPIO" error checks should already have been done.
2660 *
2661 * "Get" operations are often inlinable as reading a pin value register,
2662 * and masking the relevant bit in that register.
2663 *
2664 * When "set" operations are inlinable, they involve writing that mask to
2665 * one register to set a low value, or a different register to set it high.
2666 * Otherwise locking is needed, so there may be little value to inlining.
2667 *
2668 *------------------------------------------------------------------------
2669 *
2670 * IMPORTANT!!!  The hot paths -- get/set value -- assume that callers
2671 * have requested the GPIO.  That can include implicit requesting by
2672 * a direction setting call.  Marking a gpio as requested locks its chip
2673 * in memory, guaranteeing that these table lookups need no more locking
2674 * and that gpiochip_remove() will fail.
2675 *
2676 * REVISIT when debugging, consider adding some instrumentation to ensure
2677 * that the GPIO was actually requested.
2678 */
2679
2680static int gpiod_get_raw_value_commit(const struct gpio_desc *desc)
2681{
2682	struct gpio_chip	*chip;
2683	int offset;
2684	int value;
2685
2686	chip = desc->gdev->chip;
2687	offset = gpio_chip_hwgpio(desc);
2688	value = chip->get ? chip->get(chip, offset) : -EIO;
2689	value = value < 0 ? value : !!value;
2690	trace_gpio_value(desc_to_gpio(desc), 1, value);
2691	return value;
2692}
2693
2694static int gpio_chip_get_multiple(struct gpio_chip *chip,
2695				  unsigned long *mask, unsigned long *bits)
2696{
2697	if (chip->get_multiple) {
2698		return chip->get_multiple(chip, mask, bits);
2699	} else if (chip->get) {
2700		int i, value;
2701
2702		for_each_set_bit(i, mask, chip->ngpio) {
2703			value = chip->get(chip, i);
2704			if (value < 0)
2705				return value;
2706			__assign_bit(i, bits, value);
2707		}
2708		return 0;
2709	}
2710	return -EIO;
2711}
2712
2713int gpiod_get_array_value_complex(bool raw, bool can_sleep,
2714				  unsigned int array_size,
2715				  struct gpio_desc **desc_array,
2716				  int *value_array)
2717{
2718	int i = 0;
2719
2720	while (i < array_size) {
2721		struct gpio_chip *chip = desc_array[i]->gdev->chip;
2722		unsigned long mask[BITS_TO_LONGS(chip->ngpio)];
2723		unsigned long bits[BITS_TO_LONGS(chip->ngpio)];
2724		int first, j, ret;
2725
2726		if (!can_sleep)
2727			WARN_ON(chip->can_sleep);
2728
2729		/* collect all inputs belonging to the same chip */
2730		first = i;
2731		memset(mask, 0, sizeof(mask));
2732		do {
2733			const struct gpio_desc *desc = desc_array[i];
2734			int hwgpio = gpio_chip_hwgpio(desc);
2735
2736			__set_bit(hwgpio, mask);
2737			i++;
2738		} while ((i < array_size) &&
2739			 (desc_array[i]->gdev->chip == chip));
2740
2741		ret = gpio_chip_get_multiple(chip, mask, bits);
2742		if (ret)
2743			return ret;
2744
2745		for (j = first; j < i; j++) {
2746			const struct gpio_desc *desc = desc_array[j];
2747			int hwgpio = gpio_chip_hwgpio(desc);
2748			int value = test_bit(hwgpio, bits);
2749
2750			if (!raw && test_bit(FLAG_ACTIVE_LOW, &desc->flags))
2751				value = !value;
2752			value_array[j] = value;
2753			trace_gpio_value(desc_to_gpio(desc), 1, value);
2754		}
2755	}
2756	return 0;
2757}
2758
2759/**
2760 * gpiod_get_raw_value() - return a gpio's raw value
2761 * @desc: gpio whose value will be returned
2762 *
2763 * Return the GPIO's raw value, i.e. the value of the physical line disregarding
2764 * its ACTIVE_LOW status, or negative errno on failure.
2765 *
2766 * This function should be called from contexts where we cannot sleep, and will
2767 * complain if the GPIO chip functions potentially sleep.
2768 */
2769int gpiod_get_raw_value(const struct gpio_desc *desc)
2770{
2771	VALIDATE_DESC(desc);
2772	/* Should be using gpio_get_value_cansleep() */
2773	WARN_ON(desc->gdev->chip->can_sleep);
2774	return gpiod_get_raw_value_commit(desc);
2775}
2776EXPORT_SYMBOL_GPL(gpiod_get_raw_value);
2777
2778/**
2779 * gpiod_get_value() - return a gpio's value
2780 * @desc: gpio whose value will be returned
2781 *
2782 * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
2783 * account, or negative errno on failure.
2784 *
2785 * This function should be called from contexts where we cannot sleep, and will
2786 * complain if the GPIO chip functions potentially sleep.
2787 */
2788int gpiod_get_value(const struct gpio_desc *desc)
2789{
2790	int value;
2791
2792	VALIDATE_DESC(desc);
2793	/* Should be using gpio_get_value_cansleep() */
2794	WARN_ON(desc->gdev->chip->can_sleep);
2795
2796	value = gpiod_get_raw_value_commit(desc);
2797	if (value < 0)
2798		return value;
2799
2800	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
2801		value = !value;
2802
2803	return value;
2804}
2805EXPORT_SYMBOL_GPL(gpiod_get_value);
2806
2807/**
2808 * gpiod_get_raw_array_value() - read raw values from an array of GPIOs
2809 * @array_size: number of elements in the descriptor / value arrays
2810 * @desc_array: array of GPIO descriptors whose values will be read
2811 * @value_array: array to store the read values
2812 *
2813 * Read the raw values of the GPIOs, i.e. the values of the physical lines
2814 * without regard for their ACTIVE_LOW status.  Return 0 in case of success,
2815 * else an error code.
2816 *
2817 * This function should be called from contexts where we cannot sleep,
2818 * and it will complain if the GPIO chip functions potentially sleep.
2819 */
2820int gpiod_get_raw_array_value(unsigned int array_size,
2821			      struct gpio_desc **desc_array, int *value_array)
2822{
2823	if (!desc_array)
2824		return -EINVAL;
2825	return gpiod_get_array_value_complex(true, false, array_size,
2826					     desc_array, value_array);
2827}
2828EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value);
2829
2830/**
2831 * gpiod_get_array_value() - read values from an array of GPIOs
2832 * @array_size: number of elements in the descriptor / value arrays
2833 * @desc_array: array of GPIO descriptors whose values will be read
2834 * @value_array: array to store the read values
2835 *
2836 * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
2837 * into account.  Return 0 in case of success, else an error code.
2838 *
2839 * This function should be called from contexts where we cannot sleep,
2840 * and it will complain if the GPIO chip functions potentially sleep.
2841 */
2842int gpiod_get_array_value(unsigned int array_size,
2843			  struct gpio_desc **desc_array, int *value_array)
2844{
2845	if (!desc_array)
2846		return -EINVAL;
2847	return gpiod_get_array_value_complex(false, false, array_size,
2848					     desc_array, value_array);
2849}
2850EXPORT_SYMBOL_GPL(gpiod_get_array_value);
2851
2852/*
2853 *  gpio_set_open_drain_value_commit() - Set the open drain gpio's value.
2854 * @desc: gpio descriptor whose state need to be set.
2855 * @value: Non-zero for setting it HIGH otherwise it will set to LOW.
2856 */
2857static void gpio_set_open_drain_value_commit(struct gpio_desc *desc, bool value)
2858{
2859	int err = 0;
2860	struct gpio_chip *chip = desc->gdev->chip;
2861	int offset = gpio_chip_hwgpio(desc);
2862
2863	if (value) {
2864		err = chip->direction_input(chip, offset);
2865		if (!err)
2866			clear_bit(FLAG_IS_OUT, &desc->flags);
2867	} else {
2868		err = chip->direction_output(chip, offset, 0);
2869		if (!err)
2870			set_bit(FLAG_IS_OUT, &desc->flags);
2871	}
2872	trace_gpio_direction(desc_to_gpio(desc), value, err);
2873	if (err < 0)
2874		gpiod_err(desc,
2875			  "%s: Error in set_value for open drain err %d\n",
2876			  __func__, err);
2877}
2878
2879/*
2880 *  _gpio_set_open_source_value() - Set the open source gpio's value.
2881 * @desc: gpio descriptor whose state need to be set.
2882 * @value: Non-zero for setting it HIGH otherwise it will set to LOW.
2883 */
2884static void gpio_set_open_source_value_commit(struct gpio_desc *desc, bool value)
2885{
2886	int err = 0;
2887	struct gpio_chip *chip = desc->gdev->chip;
2888	int offset = gpio_chip_hwgpio(desc);
2889
2890	if (value) {
2891		err = chip->direction_output(chip, offset, 1);
2892		if (!err)
2893			set_bit(FLAG_IS_OUT, &desc->flags);
2894	} else {
2895		err = chip->direction_input(chip, offset);
2896		if (!err)
2897			clear_bit(FLAG_IS_OUT, &desc->flags);
2898	}
2899	trace_gpio_direction(desc_to_gpio(desc), !value, err);
2900	if (err < 0)
2901		gpiod_err(desc,
2902			  "%s: Error in set_value for open source err %d\n",
2903			  __func__, err);
2904}
2905
2906static void gpiod_set_raw_value_commit(struct gpio_desc *desc, bool value)
2907{
2908	struct gpio_chip	*chip;
2909
2910	chip = desc->gdev->chip;
2911	trace_gpio_value(desc_to_gpio(desc), 0, value);
2912	chip->set(chip, gpio_chip_hwgpio(desc), value);
 
 
 
 
 
2913}
2914
2915/*
2916 * set multiple outputs on the same chip;
2917 * use the chip's set_multiple function if available;
2918 * otherwise set the outputs sequentially;
2919 * @mask: bit mask array; one bit per output; BITS_PER_LONG bits per word
2920 *        defines which outputs are to be changed
2921 * @bits: bit value array; one bit per output; BITS_PER_LONG bits per word
2922 *        defines the values the outputs specified by mask are to be set to
2923 */
2924static void gpio_chip_set_multiple(struct gpio_chip *chip,
2925				   unsigned long *mask, unsigned long *bits)
2926{
2927	if (chip->set_multiple) {
2928		chip->set_multiple(chip, mask, bits);
2929	} else {
2930		unsigned int i;
2931
2932		/* set outputs if the corresponding mask bit is set */
2933		for_each_set_bit(i, mask, chip->ngpio)
2934			chip->set(chip, i, test_bit(i, bits));
 
 
 
 
 
 
 
2935	}
2936}
2937
2938void gpiod_set_array_value_complex(bool raw, bool can_sleep,
2939				   unsigned int array_size,
2940				   struct gpio_desc **desc_array,
2941				   int *value_array)
2942{
2943	int i = 0;
2944
2945	while (i < array_size) {
2946		struct gpio_chip *chip = desc_array[i]->gdev->chip;
2947		unsigned long mask[BITS_TO_LONGS(chip->ngpio)];
2948		unsigned long bits[BITS_TO_LONGS(chip->ngpio)];
2949		int count = 0;
2950
2951		if (!can_sleep)
2952			WARN_ON(chip->can_sleep);
2953
2954		memset(mask, 0, sizeof(mask));
2955		do {
2956			struct gpio_desc *desc = desc_array[i];
2957			int hwgpio = gpio_chip_hwgpio(desc);
2958			int value = value_array[i];
2959
2960			if (!raw && test_bit(FLAG_ACTIVE_LOW, &desc->flags))
2961				value = !value;
2962			trace_gpio_value(desc_to_gpio(desc), 0, value);
2963			/*
2964			 * collect all normal outputs belonging to the same chip
2965			 * open drain and open source outputs are set individually
2966			 */
2967			if (test_bit(FLAG_OPEN_DRAIN, &desc->flags) && !raw) {
2968				gpio_set_open_drain_value_commit(desc, value);
2969			} else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags) && !raw) {
2970				gpio_set_open_source_value_commit(desc, value);
2971			} else {
2972				__set_bit(hwgpio, mask);
2973				if (value)
2974					__set_bit(hwgpio, bits);
2975				else
2976					__clear_bit(hwgpio, bits);
2977				count++;
2978			}
2979			i++;
2980		} while ((i < array_size) &&
2981			 (desc_array[i]->gdev->chip == chip));
2982		/* push collected bits to outputs */
2983		if (count != 0)
2984			gpio_chip_set_multiple(chip, mask, bits);
2985	}
2986}
2987
2988/**
2989 * gpiod_set_raw_value() - assign a gpio's raw value
2990 * @desc: gpio whose value will be assigned
2991 * @value: value to assign
2992 *
2993 * Set the raw value of the GPIO, i.e. the value of its physical line without
2994 * regard for its ACTIVE_LOW status.
2995 *
2996 * This function should be called from contexts where we cannot sleep, and will
2997 * complain if the GPIO chip functions potentially sleep.
2998 */
2999void gpiod_set_raw_value(struct gpio_desc *desc, int value)
3000{
3001	VALIDATE_DESC_VOID(desc);
3002	/* Should be using gpiod_set_value_cansleep() */
3003	WARN_ON(desc->gdev->chip->can_sleep);
3004	gpiod_set_raw_value_commit(desc, value);
3005}
3006EXPORT_SYMBOL_GPL(gpiod_set_raw_value);
3007
3008/**
3009 * gpiod_set_value_nocheck() - set a GPIO line value without checking
3010 * @desc: the descriptor to set the value on
3011 * @value: value to set
3012 *
3013 * This sets the value of a GPIO line backing a descriptor, applying
3014 * different semantic quirks like active low and open drain/source
3015 * handling.
3016 */
3017static void gpiod_set_value_nocheck(struct gpio_desc *desc, int value)
3018{
3019	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
3020		value = !value;
3021	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
3022		gpio_set_open_drain_value_commit(desc, value);
3023	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
3024		gpio_set_open_source_value_commit(desc, value);
3025	else
3026		gpiod_set_raw_value_commit(desc, value);
3027}
3028
3029/**
3030 * gpiod_set_value() - assign a gpio's value
3031 * @desc: gpio whose value will be assigned
3032 * @value: value to assign
3033 *
3034 * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW,
3035 * OPEN_DRAIN and OPEN_SOURCE flags into account.
3036 *
3037 * This function should be called from contexts where we cannot sleep, and will
3038 * complain if the GPIO chip functions potentially sleep.
3039 */
3040void gpiod_set_value(struct gpio_desc *desc, int value)
3041{
3042	VALIDATE_DESC_VOID(desc);
 
3043	WARN_ON(desc->gdev->chip->can_sleep);
3044	gpiod_set_value_nocheck(desc, value);
 
 
3045}
3046EXPORT_SYMBOL_GPL(gpiod_set_value);
3047
3048/**
3049 * gpiod_set_raw_array_value() - assign values to an array of GPIOs
3050 * @array_size: number of elements in the descriptor / value arrays
3051 * @desc_array: array of GPIO descriptors whose values will be assigned
3052 * @value_array: array of values to assign
3053 *
3054 * Set the raw values of the GPIOs, i.e. the values of the physical lines
3055 * without regard for their ACTIVE_LOW status.
3056 *
3057 * This function should be called from contexts where we cannot sleep, and will
3058 * complain if the GPIO chip functions potentially sleep.
3059 */
3060void gpiod_set_raw_array_value(unsigned int array_size,
3061			 struct gpio_desc **desc_array, int *value_array)
3062{
3063	if (!desc_array)
3064		return;
3065	gpiod_set_array_value_complex(true, false, array_size, desc_array,
3066				      value_array);
3067}
3068EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value);
3069
3070/**
3071 * gpiod_set_array_value() - assign values to an array of GPIOs
3072 * @array_size: number of elements in the descriptor / value arrays
3073 * @desc_array: array of GPIO descriptors whose values will be assigned
3074 * @value_array: array of values to assign
3075 *
3076 * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
3077 * into account.
3078 *
3079 * This function should be called from contexts where we cannot sleep, and will
3080 * complain if the GPIO chip functions potentially sleep.
3081 */
3082void gpiod_set_array_value(unsigned int array_size,
3083			   struct gpio_desc **desc_array, int *value_array)
3084{
3085	if (!desc_array)
3086		return;
3087	gpiod_set_array_value_complex(false, false, array_size, desc_array,
3088				      value_array);
3089}
3090EXPORT_SYMBOL_GPL(gpiod_set_array_value);
3091
3092/**
3093 * gpiod_cansleep() - report whether gpio value access may sleep
3094 * @desc: gpio to check
3095 *
3096 */
3097int gpiod_cansleep(const struct gpio_desc *desc)
3098{
3099	VALIDATE_DESC(desc);
3100	return desc->gdev->chip->can_sleep;
3101}
3102EXPORT_SYMBOL_GPL(gpiod_cansleep);
3103
3104/**
3105 * gpiod_to_irq() - return the IRQ corresponding to a GPIO
3106 * @desc: gpio whose IRQ will be returned (already requested)
3107 *
3108 * Return the IRQ corresponding to the passed GPIO, or an error code in case of
3109 * error.
3110 */
3111int gpiod_to_irq(const struct gpio_desc *desc)
3112{
3113	struct gpio_chip *chip;
3114	int offset;
3115
3116	/*
3117	 * Cannot VALIDATE_DESC() here as gpiod_to_irq() consumer semantics
3118	 * requires this function to not return zero on an invalid descriptor
3119	 * but rather a negative error number.
3120	 */
3121	if (!desc || IS_ERR(desc) || !desc->gdev || !desc->gdev->chip)
3122		return -EINVAL;
3123
3124	chip = desc->gdev->chip;
3125	offset = gpio_chip_hwgpio(desc);
3126	if (chip->to_irq) {
3127		int retirq = chip->to_irq(chip, offset);
3128
3129		/* Zero means NO_IRQ */
3130		if (!retirq)
3131			return -ENXIO;
3132
3133		return retirq;
3134	}
3135	return -ENXIO;
3136}
3137EXPORT_SYMBOL_GPL(gpiod_to_irq);
3138
3139/**
3140 * gpiochip_lock_as_irq() - lock a GPIO to be used as IRQ
3141 * @chip: the chip the GPIO to lock belongs to
3142 * @offset: the offset of the GPIO to lock as IRQ
3143 *
3144 * This is used directly by GPIO drivers that want to lock down
3145 * a certain GPIO line to be used for IRQs.
3146 */
3147int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
3148{
3149	struct gpio_desc *desc;
3150
3151	desc = gpiochip_get_desc(chip, offset);
3152	if (IS_ERR(desc))
3153		return PTR_ERR(desc);
3154
3155	/*
3156	 * If it's fast: flush the direction setting if something changed
3157	 * behind our back
3158	 */
3159	if (!chip->can_sleep && chip->get_direction) {
3160		int dir = chip->get_direction(chip, offset);
3161
3162		if (dir)
3163			clear_bit(FLAG_IS_OUT, &desc->flags);
3164		else
3165			set_bit(FLAG_IS_OUT, &desc->flags);
3166	}
3167
3168	if (test_bit(FLAG_IS_OUT, &desc->flags)) {
3169		chip_err(chip,
3170			  "%s: tried to flag a GPIO set as output for IRQ\n",
3171			  __func__);
3172		return -EIO;
3173	}
3174
3175	set_bit(FLAG_USED_AS_IRQ, &desc->flags);
3176
3177	/*
3178	 * If the consumer has not set up a label (such as when the
3179	 * IRQ is referenced from .to_irq()) we set up a label here
3180	 * so it is clear this is used as an interrupt.
3181	 */
3182	if (!desc->label)
3183		desc_set_label(desc, "interrupt");
3184
3185	return 0;
3186}
3187EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq);
3188
3189/**
3190 * gpiochip_unlock_as_irq() - unlock a GPIO used as IRQ
3191 * @chip: the chip the GPIO to lock belongs to
3192 * @offset: the offset of the GPIO to lock as IRQ
3193 *
3194 * This is used directly by GPIO drivers that want to indicate
3195 * that a certain GPIO is no longer used exclusively for IRQ.
3196 */
3197void gpiochip_unlock_as_irq(struct gpio_chip *chip, unsigned int offset)
3198{
3199	struct gpio_desc *desc;
3200
3201	desc = gpiochip_get_desc(chip, offset);
3202	if (IS_ERR(desc))
3203		return;
3204
3205	clear_bit(FLAG_USED_AS_IRQ, &desc->flags);
3206
3207	/* If we only had this marking, erase it */
3208	if (desc->label && !strcmp(desc->label, "interrupt"))
3209		desc_set_label(desc, NULL);
3210}
3211EXPORT_SYMBOL_GPL(gpiochip_unlock_as_irq);
3212
3213bool gpiochip_line_is_irq(struct gpio_chip *chip, unsigned int offset)
3214{
3215	if (offset >= chip->ngpio)
3216		return false;
3217
3218	return test_bit(FLAG_USED_AS_IRQ, &chip->gpiodev->descs[offset].flags);
3219}
3220EXPORT_SYMBOL_GPL(gpiochip_line_is_irq);
3221
3222bool gpiochip_line_is_open_drain(struct gpio_chip *chip, unsigned int offset)
3223{
3224	if (offset >= chip->ngpio)
3225		return false;
3226
3227	return test_bit(FLAG_OPEN_DRAIN, &chip->gpiodev->descs[offset].flags);
3228}
3229EXPORT_SYMBOL_GPL(gpiochip_line_is_open_drain);
3230
3231bool gpiochip_line_is_open_source(struct gpio_chip *chip, unsigned int offset)
3232{
3233	if (offset >= chip->ngpio)
3234		return false;
3235
3236	return test_bit(FLAG_OPEN_SOURCE, &chip->gpiodev->descs[offset].flags);
3237}
3238EXPORT_SYMBOL_GPL(gpiochip_line_is_open_source);
3239
3240bool gpiochip_line_is_persistent(struct gpio_chip *chip, unsigned int offset)
3241{
3242	if (offset >= chip->ngpio)
3243		return false;
3244
3245	return !test_bit(FLAG_TRANSITORY, &chip->gpiodev->descs[offset].flags);
3246}
3247EXPORT_SYMBOL_GPL(gpiochip_line_is_persistent);
3248
3249/**
3250 * gpiod_get_raw_value_cansleep() - return a gpio's raw value
3251 * @desc: gpio whose value will be returned
3252 *
3253 * Return the GPIO's raw value, i.e. the value of the physical line disregarding
3254 * its ACTIVE_LOW status, or negative errno on failure.
3255 *
3256 * This function is to be called from contexts that can sleep.
3257 */
3258int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
3259{
3260	might_sleep_if(extra_checks);
3261	VALIDATE_DESC(desc);
3262	return gpiod_get_raw_value_commit(desc);
3263}
3264EXPORT_SYMBOL_GPL(gpiod_get_raw_value_cansleep);
3265
3266/**
3267 * gpiod_get_value_cansleep() - return a gpio's value
3268 * @desc: gpio whose value will be returned
3269 *
3270 * Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
3271 * account, or negative errno on failure.
3272 *
3273 * This function is to be called from contexts that can sleep.
3274 */
3275int gpiod_get_value_cansleep(const struct gpio_desc *desc)
3276{
3277	int value;
3278
3279	might_sleep_if(extra_checks);
3280	VALIDATE_DESC(desc);
3281	value = gpiod_get_raw_value_commit(desc);
3282	if (value < 0)
3283		return value;
3284
3285	if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
3286		value = !value;
3287
3288	return value;
3289}
3290EXPORT_SYMBOL_GPL(gpiod_get_value_cansleep);
3291
3292/**
3293 * gpiod_get_raw_array_value_cansleep() - read raw values from an array of GPIOs
3294 * @array_size: number of elements in the descriptor / value arrays
3295 * @desc_array: array of GPIO descriptors whose values will be read
3296 * @value_array: array to store the read values
3297 *
3298 * Read the raw values of the GPIOs, i.e. the values of the physical lines
3299 * without regard for their ACTIVE_LOW status.  Return 0 in case of success,
3300 * else an error code.
3301 *
3302 * This function is to be called from contexts that can sleep.
3303 */
3304int gpiod_get_raw_array_value_cansleep(unsigned int array_size,
3305				       struct gpio_desc **desc_array,
3306				       int *value_array)
3307{
3308	might_sleep_if(extra_checks);
3309	if (!desc_array)
3310		return -EINVAL;
3311	return gpiod_get_array_value_complex(true, true, array_size,
3312					     desc_array, value_array);
3313}
3314EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value_cansleep);
3315
3316/**
3317 * gpiod_get_array_value_cansleep() - read values from an array of GPIOs
3318 * @array_size: number of elements in the descriptor / value arrays
3319 * @desc_array: array of GPIO descriptors whose values will be read
3320 * @value_array: array to store the read values
3321 *
3322 * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
3323 * into account.  Return 0 in case of success, else an error code.
3324 *
3325 * This function is to be called from contexts that can sleep.
3326 */
3327int gpiod_get_array_value_cansleep(unsigned int array_size,
3328				   struct gpio_desc **desc_array,
3329				   int *value_array)
3330{
3331	might_sleep_if(extra_checks);
3332	if (!desc_array)
3333		return -EINVAL;
3334	return gpiod_get_array_value_complex(false, true, array_size,
3335					     desc_array, value_array);
3336}
3337EXPORT_SYMBOL_GPL(gpiod_get_array_value_cansleep);
3338
3339/**
3340 * gpiod_set_raw_value_cansleep() - assign a gpio's raw value
3341 * @desc: gpio whose value will be assigned
3342 * @value: value to assign
3343 *
3344 * Set the raw value of the GPIO, i.e. the value of its physical line without
3345 * regard for its ACTIVE_LOW status.
3346 *
3347 * This function is to be called from contexts that can sleep.
3348 */
3349void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
3350{
3351	might_sleep_if(extra_checks);
3352	VALIDATE_DESC_VOID(desc);
3353	gpiod_set_raw_value_commit(desc, value);
3354}
3355EXPORT_SYMBOL_GPL(gpiod_set_raw_value_cansleep);
3356
3357/**
3358 * gpiod_set_value_cansleep() - assign a gpio's value
3359 * @desc: gpio whose value will be assigned
3360 * @value: value to assign
3361 *
3362 * Set the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
3363 * account
3364 *
3365 * This function is to be called from contexts that can sleep.
3366 */
3367void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
3368{
3369	might_sleep_if(extra_checks);
3370	VALIDATE_DESC_VOID(desc);
3371	gpiod_set_value_nocheck(desc, value);
 
 
3372}
3373EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
3374
3375/**
3376 * gpiod_set_raw_array_value_cansleep() - assign values to an array of GPIOs
3377 * @array_size: number of elements in the descriptor / value arrays
3378 * @desc_array: array of GPIO descriptors whose values will be assigned
3379 * @value_array: array of values to assign
3380 *
3381 * Set the raw values of the GPIOs, i.e. the values of the physical lines
3382 * without regard for their ACTIVE_LOW status.
3383 *
3384 * This function is to be called from contexts that can sleep.
3385 */
3386void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
3387					struct gpio_desc **desc_array,
3388					int *value_array)
3389{
3390	might_sleep_if(extra_checks);
3391	if (!desc_array)
3392		return;
3393	gpiod_set_array_value_complex(true, true, array_size, desc_array,
3394				      value_array);
3395}
3396EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value_cansleep);
3397
3398/**
3399 * gpiod_add_lookup_tables() - register GPIO device consumers
3400 * @tables: list of tables of consumers to register
3401 * @n: number of tables in the list
3402 */
3403void gpiod_add_lookup_tables(struct gpiod_lookup_table **tables, size_t n)
3404{
3405	unsigned int i;
3406
3407	mutex_lock(&gpio_lookup_lock);
3408
3409	for (i = 0; i < n; i++)
3410		list_add_tail(&tables[i]->list, &gpio_lookup_list);
3411
3412	mutex_unlock(&gpio_lookup_lock);
3413}
3414
3415/**
3416 * gpiod_set_array_value_cansleep() - assign values to an array of GPIOs
3417 * @array_size: number of elements in the descriptor / value arrays
3418 * @desc_array: array of GPIO descriptors whose values will be assigned
3419 * @value_array: array of values to assign
3420 *
3421 * Set the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
3422 * into account.
3423 *
3424 * This function is to be called from contexts that can sleep.
3425 */
3426void gpiod_set_array_value_cansleep(unsigned int array_size,
3427				    struct gpio_desc **desc_array,
3428				    int *value_array)
3429{
3430	might_sleep_if(extra_checks);
3431	if (!desc_array)
3432		return;
3433	gpiod_set_array_value_complex(false, true, array_size, desc_array,
3434				      value_array);
3435}
3436EXPORT_SYMBOL_GPL(gpiod_set_array_value_cansleep);
3437
3438/**
3439 * gpiod_add_lookup_table() - register GPIO device consumers
3440 * @table: table of consumers to register
3441 */
3442void gpiod_add_lookup_table(struct gpiod_lookup_table *table)
3443{
3444	mutex_lock(&gpio_lookup_lock);
3445
3446	list_add_tail(&table->list, &gpio_lookup_list);
3447
3448	mutex_unlock(&gpio_lookup_lock);
3449}
3450EXPORT_SYMBOL_GPL(gpiod_add_lookup_table);
3451
3452/**
3453 * gpiod_remove_lookup_table() - unregister GPIO device consumers
3454 * @table: table of consumers to unregister
3455 */
3456void gpiod_remove_lookup_table(struct gpiod_lookup_table *table)
3457{
3458	mutex_lock(&gpio_lookup_lock);
3459
3460	list_del(&table->list);
3461
3462	mutex_unlock(&gpio_lookup_lock);
3463}
3464EXPORT_SYMBOL_GPL(gpiod_remove_lookup_table);
3465
3466static struct gpiod_lookup_table *gpiod_find_lookup_table(struct device *dev)
3467{
3468	const char *dev_id = dev ? dev_name(dev) : NULL;
3469	struct gpiod_lookup_table *table;
3470
3471	mutex_lock(&gpio_lookup_lock);
3472
3473	list_for_each_entry(table, &gpio_lookup_list, list) {
3474		if (table->dev_id && dev_id) {
3475			/*
3476			 * Valid strings on both ends, must be identical to have
3477			 * a match
3478			 */
3479			if (!strcmp(table->dev_id, dev_id))
3480				goto found;
3481		} else {
3482			/*
3483			 * One of the pointers is NULL, so both must be to have
3484			 * a match
3485			 */
3486			if (dev_id == table->dev_id)
3487				goto found;
3488		}
3489	}
3490	table = NULL;
3491
3492found:
3493	mutex_unlock(&gpio_lookup_lock);
3494	return table;
3495}
3496
3497static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
3498				    unsigned int idx,
3499				    enum gpio_lookup_flags *flags)
3500{
3501	struct gpio_desc *desc = ERR_PTR(-ENOENT);
3502	struct gpiod_lookup_table *table;
3503	struct gpiod_lookup *p;
3504
3505	table = gpiod_find_lookup_table(dev);
3506	if (!table)
3507		return desc;
3508
3509	for (p = &table->table[0]; p->chip_label; p++) {
3510		struct gpio_chip *chip;
3511
3512		/* idx must always match exactly */
3513		if (p->idx != idx)
3514			continue;
3515
3516		/* If the lookup entry has a con_id, require exact match */
3517		if (p->con_id && (!con_id || strcmp(p->con_id, con_id)))
3518			continue;
3519
3520		chip = find_chip_by_name(p->chip_label);
3521
3522		if (!chip) {
3523			dev_err(dev, "cannot find GPIO chip %s\n",
3524				p->chip_label);
3525			return ERR_PTR(-ENODEV);
3526		}
3527
3528		if (chip->ngpio <= p->chip_hwnum) {
3529			dev_err(dev,
3530				"requested GPIO %d is out of range [0..%d] for chip %s\n",
3531				idx, chip->ngpio, chip->label);
3532			return ERR_PTR(-EINVAL);
3533		}
3534
3535		desc = gpiochip_get_desc(chip, p->chip_hwnum);
3536		*flags = p->flags;
3537
3538		return desc;
3539	}
3540
3541	return desc;
3542}
3543
3544static int dt_gpio_count(struct device *dev, const char *con_id)
3545{
3546	int ret;
3547	char propname[32];
3548	unsigned int i;
3549
3550	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
3551		if (con_id)
3552			snprintf(propname, sizeof(propname), "%s-%s",
3553				 con_id, gpio_suffixes[i]);
3554		else
3555			snprintf(propname, sizeof(propname), "%s",
3556				 gpio_suffixes[i]);
3557
3558		ret = of_gpio_named_count(dev->of_node, propname);
3559		if (ret > 0)
3560			break;
3561	}
3562	return ret ? ret : -ENOENT;
3563}
3564
3565static int platform_gpio_count(struct device *dev, const char *con_id)
3566{
3567	struct gpiod_lookup_table *table;
3568	struct gpiod_lookup *p;
3569	unsigned int count = 0;
3570
3571	table = gpiod_find_lookup_table(dev);
3572	if (!table)
3573		return -ENOENT;
3574
3575	for (p = &table->table[0]; p->chip_label; p++) {
3576		if ((con_id && p->con_id && !strcmp(con_id, p->con_id)) ||
3577		    (!con_id && !p->con_id))
3578			count++;
3579	}
3580	if (!count)
3581		return -ENOENT;
3582
3583	return count;
3584}
3585
3586/**
3587 * gpiod_count - return the number of GPIOs associated with a device / function
3588 *		or -ENOENT if no GPIO has been assigned to the requested function
3589 * @dev:	GPIO consumer, can be NULL for system-global GPIOs
3590 * @con_id:	function within the GPIO consumer
3591 */
3592int gpiod_count(struct device *dev, const char *con_id)
3593{
3594	int count = -ENOENT;
3595
3596	if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
3597		count = dt_gpio_count(dev, con_id);
3598	else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev))
3599		count = acpi_gpio_count(dev, con_id);
3600
3601	if (count < 0)
3602		count = platform_gpio_count(dev, con_id);
3603
3604	return count;
3605}
3606EXPORT_SYMBOL_GPL(gpiod_count);
3607
3608/**
3609 * gpiod_get - obtain a GPIO for a given GPIO function
3610 * @dev:	GPIO consumer, can be NULL for system-global GPIOs
3611 * @con_id:	function within the GPIO consumer
3612 * @flags:	optional GPIO initialization flags
3613 *
3614 * Return the GPIO descriptor corresponding to the function con_id of device
3615 * dev, -ENOENT if no GPIO has been assigned to the requested function, or
3616 * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
3617 */
3618struct gpio_desc *__must_check gpiod_get(struct device *dev, const char *con_id,
3619					 enum gpiod_flags flags)
3620{
3621	return gpiod_get_index(dev, con_id, 0, flags);
3622}
3623EXPORT_SYMBOL_GPL(gpiod_get);
3624
3625/**
3626 * gpiod_get_optional - obtain an optional GPIO for a given GPIO function
3627 * @dev: GPIO consumer, can be NULL for system-global GPIOs
3628 * @con_id: function within the GPIO consumer
3629 * @flags: optional GPIO initialization flags
3630 *
3631 * This is equivalent to gpiod_get(), except that when no GPIO was assigned to
3632 * the requested function it will return NULL. This is convenient for drivers
3633 * that need to handle optional GPIOs.
3634 */
3635struct gpio_desc *__must_check gpiod_get_optional(struct device *dev,
3636						  const char *con_id,
3637						  enum gpiod_flags flags)
3638{
3639	return gpiod_get_index_optional(dev, con_id, 0, flags);
3640}
3641EXPORT_SYMBOL_GPL(gpiod_get_optional);
3642
3643
3644/**
3645 * gpiod_configure_flags - helper function to configure a given GPIO
3646 * @desc:	gpio whose value will be assigned
3647 * @con_id:	function within the GPIO consumer
3648 * @lflags:	gpio_lookup_flags - returned from of_find_gpio() or
3649 *		of_get_gpio_hog()
3650 * @dflags:	gpiod_flags - optional GPIO initialization flags
3651 *
3652 * Return 0 on success, -ENOENT if no GPIO has been assigned to the
3653 * requested function and/or index, or another IS_ERR() code if an error
3654 * occurred while trying to acquire the GPIO.
3655 */
3656int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
3657		unsigned long lflags, enum gpiod_flags dflags)
3658{
3659	int status;
3660
3661	if (lflags & GPIO_ACTIVE_LOW)
3662		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
3663
3664	if (lflags & GPIO_OPEN_DRAIN)
3665		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
3666	else if (dflags & GPIOD_FLAGS_BIT_OPEN_DRAIN) {
3667		/*
3668		 * This enforces open drain mode from the consumer side.
3669		 * This is necessary for some busses like I2C, but the lookup
3670		 * should *REALLY* have specified them as open drain in the
3671		 * first place, so print a little warning here.
3672		 */
3673		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
3674		gpiod_warn(desc,
3675			   "enforced open drain please flag it properly in DT/ACPI DSDT/board file\n");
3676	}
3677
3678	if (lflags & GPIO_OPEN_SOURCE)
3679		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
3680
3681	status = gpiod_set_transitory(desc, (lflags & GPIO_TRANSITORY));
3682	if (status < 0)
3683		return status;
3684
3685	/* No particular flag request, return here... */
3686	if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {
3687		pr_debug("no flags found for %s\n", con_id);
3688		return 0;
3689	}
3690
3691	/* Process flags */
3692	if (dflags & GPIOD_FLAGS_BIT_DIR_OUT)
3693		status = gpiod_direction_output(desc,
3694				!!(dflags & GPIOD_FLAGS_BIT_DIR_VAL));
3695	else
3696		status = gpiod_direction_input(desc);
3697
3698	return status;
3699}
3700
3701/**
3702 * gpiod_get_index - obtain a GPIO from a multi-index GPIO function
3703 * @dev:	GPIO consumer, can be NULL for system-global GPIOs
3704 * @con_id:	function within the GPIO consumer
3705 * @idx:	index of the GPIO to obtain in the consumer
3706 * @flags:	optional GPIO initialization flags
3707 *
3708 * This variant of gpiod_get() allows to access GPIOs other than the first
3709 * defined one for functions that define several GPIOs.
3710 *
3711 * Return a valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the
3712 * requested function and/or index, or another IS_ERR() code if an error
3713 * occurred while trying to acquire the GPIO.
3714 */
3715struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
3716					       const char *con_id,
3717					       unsigned int idx,
3718					       enum gpiod_flags flags)
3719{
3720	struct gpio_desc *desc = NULL;
3721	int status;
3722	enum gpio_lookup_flags lookupflags = 0;
3723	/* Maybe we have a device name, maybe not */
3724	const char *devname = dev ? dev_name(dev) : "?";
3725
3726	dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
3727
3728	if (dev) {
3729		/* Using device tree? */
3730		if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
3731			dev_dbg(dev, "using device tree for GPIO lookup\n");
3732			desc = of_find_gpio(dev, con_id, idx, &lookupflags);
3733		} else if (ACPI_COMPANION(dev)) {
3734			dev_dbg(dev, "using ACPI for GPIO lookup\n");
3735			desc = acpi_find_gpio(dev, con_id, idx, &flags, &lookupflags);
3736		}
3737	}
3738
3739	/*
3740	 * Either we are not using DT or ACPI, or their lookup did not return
3741	 * a result. In that case, use platform lookup as a fallback.
3742	 */
3743	if (!desc || desc == ERR_PTR(-ENOENT)) {
3744		dev_dbg(dev, "using lookup tables for GPIO lookup\n");
3745		desc = gpiod_find(dev, con_id, idx, &lookupflags);
3746	}
3747
3748	if (IS_ERR(desc)) {
3749		dev_dbg(dev, "No GPIO consumer %s found\n", con_id);
3750		return desc;
3751	}
3752
3753	/*
3754	 * If a connection label was passed use that, else attempt to use
3755	 * the device name as label
3756	 */
3757	status = gpiod_request(desc, con_id ? con_id : devname);
3758	if (status < 0)
3759		return ERR_PTR(status);
3760
3761	status = gpiod_configure_flags(desc, con_id, lookupflags, flags);
3762	if (status < 0) {
3763		dev_dbg(dev, "setup of GPIO %s failed\n", con_id);
3764		gpiod_put(desc);
3765		return ERR_PTR(status);
3766	}
3767
3768	return desc;
3769}
3770EXPORT_SYMBOL_GPL(gpiod_get_index);
3771
3772/**
3773 * gpiod_get_from_of_node() - obtain a GPIO from an OF node
3774 * @node:	handle of the OF node
3775 * @propname:	name of the DT property representing the GPIO
3776 * @index:	index of the GPIO to obtain for the consumer
3777 * @dflags:	GPIO initialization flags
3778 * @label:	label to attach to the requested GPIO
3779 *
3780 * Returns:
3781 * On successful request the GPIO pin is configured in accordance with
3782 * provided @dflags. If the node does not have the requested GPIO
3783 * property, NULL is returned.
3784 *
3785 * In case of error an ERR_PTR() is returned.
3786 */
3787struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
3788					 const char *propname, int index,
3789					 enum gpiod_flags dflags,
3790					 const char *label)
3791{
3792	struct gpio_desc *desc;
3793	unsigned long lflags = 0;
3794	enum of_gpio_flags flags;
3795	bool active_low = false;
3796	bool single_ended = false;
3797	bool open_drain = false;
3798	bool transitory = false;
3799	int ret;
3800
3801	desc = of_get_named_gpiod_flags(node, propname,
3802					index, &flags);
3803
3804	if (!desc || IS_ERR(desc)) {
3805		/* If it is not there, just return NULL */
3806		if (PTR_ERR(desc) == -ENOENT)
3807			return NULL;
3808		return desc;
3809	}
3810
3811	active_low = flags & OF_GPIO_ACTIVE_LOW;
3812	single_ended = flags & OF_GPIO_SINGLE_ENDED;
3813	open_drain = flags & OF_GPIO_OPEN_DRAIN;
3814	transitory = flags & OF_GPIO_TRANSITORY;
3815
3816	ret = gpiod_request(desc, label);
3817	if (ret)
3818		return ERR_PTR(ret);
3819
3820	if (active_low)
3821		lflags |= GPIO_ACTIVE_LOW;
3822
3823	if (single_ended) {
3824		if (open_drain)
3825			lflags |= GPIO_OPEN_DRAIN;
3826		else
3827			lflags |= GPIO_OPEN_SOURCE;
3828	}
3829
3830	if (transitory)
3831		lflags |= GPIO_TRANSITORY;
3832
3833	ret = gpiod_configure_flags(desc, propname, lflags, dflags);
3834	if (ret < 0) {
3835		gpiod_put(desc);
3836		return ERR_PTR(ret);
3837	}
3838
3839	return desc;
3840}
3841EXPORT_SYMBOL(gpiod_get_from_of_node);
3842
3843/**
3844 * fwnode_get_named_gpiod - obtain a GPIO from firmware node
3845 * @fwnode:	handle of the firmware node
3846 * @propname:	name of the firmware property representing the GPIO
3847 * @index:	index of the GPIO to obtain for the consumer
3848 * @dflags:	GPIO initialization flags
3849 * @label:	label to attach to the requested GPIO
3850 *
3851 * This function can be used for drivers that get their configuration
3852 * from opaque firmware.
3853 *
3854 * The function properly finds the corresponding GPIO using whatever is the
3855 * underlying firmware interface and then makes sure that the GPIO
3856 * descriptor is requested before it is returned to the caller.
3857 *
3858 * Returns:
3859 * On successful request the GPIO pin is configured in accordance with
3860 * provided @dflags.
3861 *
3862 * In case of error an ERR_PTR() is returned.
3863 */
3864struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
3865					 const char *propname, int index,
3866					 enum gpiod_flags dflags,
3867					 const char *label)
3868{
3869	struct gpio_desc *desc = ERR_PTR(-ENODEV);
3870	unsigned long lflags = 0;
 
3871	int ret;
3872
3873	if (!fwnode)
3874		return ERR_PTR(-EINVAL);
3875
3876	if (is_of_node(fwnode)) {
3877		desc = gpiod_get_from_of_node(to_of_node(fwnode),
3878					      propname, index,
3879					      dflags,
3880					      label);
3881		return desc;
 
 
 
3882	} else if (is_acpi_node(fwnode)) {
3883		struct acpi_gpio_info info;
3884
3885		desc = acpi_node_get_gpiod(fwnode, propname, index, &info);
3886		if (IS_ERR(desc))
3887			return desc;
 
3888
3889		acpi_gpio_update_gpiod_flags(&dflags, &info);
3890
3891		if (info.polarity == GPIO_ACTIVE_LOW)
3892			lflags |= GPIO_ACTIVE_LOW;
3893	}
3894
3895	/* Currently only ACPI takes this path */
3896	ret = gpiod_request(desc, label);
3897	if (ret)
3898		return ERR_PTR(ret);
3899
3900	ret = gpiod_configure_flags(desc, propname, lflags, dflags);
3901	if (ret < 0) {
3902		gpiod_put(desc);
3903		return ERR_PTR(ret);
 
 
 
 
3904	}
3905
3906	return desc;
3907}
3908EXPORT_SYMBOL_GPL(fwnode_get_named_gpiod);
3909
3910/**
3911 * gpiod_get_index_optional - obtain an optional GPIO from a multi-index GPIO
3912 *                            function
3913 * @dev: GPIO consumer, can be NULL for system-global GPIOs
3914 * @con_id: function within the GPIO consumer
3915 * @index: index of the GPIO to obtain in the consumer
3916 * @flags: optional GPIO initialization flags
3917 *
3918 * This is equivalent to gpiod_get_index(), except that when no GPIO with the
3919 * specified index was assigned to the requested function it will return NULL.
3920 * This is convenient for drivers that need to handle optional GPIOs.
3921 */
3922struct gpio_desc *__must_check gpiod_get_index_optional(struct device *dev,
3923							const char *con_id,
3924							unsigned int index,
3925							enum gpiod_flags flags)
3926{
3927	struct gpio_desc *desc;
3928
3929	desc = gpiod_get_index(dev, con_id, index, flags);
3930	if (IS_ERR(desc)) {
3931		if (PTR_ERR(desc) == -ENOENT)
3932			return NULL;
3933	}
3934
3935	return desc;
3936}
3937EXPORT_SYMBOL_GPL(gpiod_get_index_optional);
3938
3939/**
3940 * gpiod_hog - Hog the specified GPIO desc given the provided flags
3941 * @desc:	gpio whose value will be assigned
3942 * @name:	gpio line name
3943 * @lflags:	gpio_lookup_flags - returned from of_find_gpio() or
3944 *		of_get_gpio_hog()
3945 * @dflags:	gpiod_flags - optional GPIO initialization flags
3946 */
3947int gpiod_hog(struct gpio_desc *desc, const char *name,
3948	      unsigned long lflags, enum gpiod_flags dflags)
3949{
3950	struct gpio_chip *chip;
3951	struct gpio_desc *local_desc;
3952	int hwnum;
3953	int status;
3954
3955	chip = gpiod_to_chip(desc);
3956	hwnum = gpio_chip_hwgpio(desc);
3957
3958	local_desc = gpiochip_request_own_desc(chip, hwnum, name);
3959	if (IS_ERR(local_desc)) {
3960		status = PTR_ERR(local_desc);
3961		pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n",
3962		       name, chip->label, hwnum, status);
3963		return status;
3964	}
3965
3966	status = gpiod_configure_flags(desc, name, lflags, dflags);
3967	if (status < 0) {
3968		pr_err("setup of hog GPIO %s (chip %s, offset %d) failed, %d\n",
3969		       name, chip->label, hwnum, status);
3970		gpiochip_free_own_desc(desc);
3971		return status;
3972	}
3973
3974	/* Mark GPIO as hogged so it can be identified and removed later */
3975	set_bit(FLAG_IS_HOGGED, &desc->flags);
3976
3977	pr_info("GPIO line %d (%s) hogged as %s%s\n",
3978		desc_to_gpio(desc), name,
3979		(dflags&GPIOD_FLAGS_BIT_DIR_OUT) ? "output" : "input",
3980		(dflags&GPIOD_FLAGS_BIT_DIR_OUT) ?
3981		  (dflags&GPIOD_FLAGS_BIT_DIR_VAL) ? "/high" : "/low":"");
3982
3983	return 0;
3984}
3985
3986/**
3987 * gpiochip_free_hogs - Scan gpio-controller chip and release GPIO hog
3988 * @chip:	gpio chip to act on
3989 *
3990 * This is only used by of_gpiochip_remove to free hogged gpios
3991 */
3992static void gpiochip_free_hogs(struct gpio_chip *chip)
3993{
3994	int id;
3995
3996	for (id = 0; id < chip->ngpio; id++) {
3997		if (test_bit(FLAG_IS_HOGGED, &chip->gpiodev->descs[id].flags))
3998			gpiochip_free_own_desc(&chip->gpiodev->descs[id]);
3999	}
4000}
4001
4002/**
4003 * gpiod_get_array - obtain multiple GPIOs from a multi-index GPIO function
4004 * @dev:	GPIO consumer, can be NULL for system-global GPIOs
4005 * @con_id:	function within the GPIO consumer
4006 * @flags:	optional GPIO initialization flags
4007 *
4008 * This function acquires all the GPIOs defined under a given function.
4009 *
4010 * Return a struct gpio_descs containing an array of descriptors, -ENOENT if
4011 * no GPIO has been assigned to the requested function, or another IS_ERR()
4012 * code if an error occurred while trying to acquire the GPIOs.
4013 */
4014struct gpio_descs *__must_check gpiod_get_array(struct device *dev,
4015						const char *con_id,
4016						enum gpiod_flags flags)
4017{
4018	struct gpio_desc *desc;
4019	struct gpio_descs *descs;
4020	int count;
4021
4022	count = gpiod_count(dev, con_id);
4023	if (count < 0)
4024		return ERR_PTR(count);
4025
4026	descs = kzalloc(sizeof(*descs) + sizeof(descs->desc[0]) * count,
4027			GFP_KERNEL);
4028	if (!descs)
4029		return ERR_PTR(-ENOMEM);
4030
4031	for (descs->ndescs = 0; descs->ndescs < count; ) {
4032		desc = gpiod_get_index(dev, con_id, descs->ndescs, flags);
4033		if (IS_ERR(desc)) {
4034			gpiod_put_array(descs);
4035			return ERR_CAST(desc);
4036		}
4037		descs->desc[descs->ndescs] = desc;
4038		descs->ndescs++;
4039	}
4040	return descs;
4041}
4042EXPORT_SYMBOL_GPL(gpiod_get_array);
4043
4044/**
4045 * gpiod_get_array_optional - obtain multiple GPIOs from a multi-index GPIO
4046 *                            function
4047 * @dev:	GPIO consumer, can be NULL for system-global GPIOs
4048 * @con_id:	function within the GPIO consumer
4049 * @flags:	optional GPIO initialization flags
4050 *
4051 * This is equivalent to gpiod_get_array(), except that when no GPIO was
4052 * assigned to the requested function it will return NULL.
4053 */
4054struct gpio_descs *__must_check gpiod_get_array_optional(struct device *dev,
4055							const char *con_id,
4056							enum gpiod_flags flags)
4057{
4058	struct gpio_descs *descs;
4059
4060	descs = gpiod_get_array(dev, con_id, flags);
4061	if (IS_ERR(descs) && (PTR_ERR(descs) == -ENOENT))
4062		return NULL;
4063
4064	return descs;
4065}
4066EXPORT_SYMBOL_GPL(gpiod_get_array_optional);
4067
4068/**
4069 * gpiod_put - dispose of a GPIO descriptor
4070 * @desc:	GPIO descriptor to dispose of
4071 *
4072 * No descriptor can be used after gpiod_put() has been called on it.
4073 */
4074void gpiod_put(struct gpio_desc *desc)
4075{
4076	gpiod_free(desc);
4077}
4078EXPORT_SYMBOL_GPL(gpiod_put);
4079
4080/**
4081 * gpiod_put_array - dispose of multiple GPIO descriptors
4082 * @descs:	struct gpio_descs containing an array of descriptors
4083 */
4084void gpiod_put_array(struct gpio_descs *descs)
4085{
4086	unsigned int i;
4087
4088	for (i = 0; i < descs->ndescs; i++)
4089		gpiod_put(descs->desc[i]);
4090
4091	kfree(descs);
4092}
4093EXPORT_SYMBOL_GPL(gpiod_put_array);
4094
4095static int __init gpiolib_dev_init(void)
4096{
4097	int ret;
4098
4099	/* Register GPIO sysfs bus */
4100	ret  = bus_register(&gpio_bus_type);
4101	if (ret < 0) {
4102		pr_err("gpiolib: could not register GPIO bus type\n");
4103		return ret;
4104	}
4105
4106	ret = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpiochip");
4107	if (ret < 0) {
4108		pr_err("gpiolib: failed to allocate char dev region\n");
4109		bus_unregister(&gpio_bus_type);
4110	} else {
4111		gpiolib_initialized = true;
4112		gpiochip_setup_devs();
4113	}
4114	return ret;
4115}
4116core_initcall(gpiolib_dev_init);
4117
4118#ifdef CONFIG_DEBUG_FS
4119
4120static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev)
4121{
4122	unsigned		i;
4123	struct gpio_chip	*chip = gdev->chip;
4124	unsigned		gpio = gdev->base;
4125	struct gpio_desc	*gdesc = &gdev->descs[0];
4126	int			is_out;
4127	int			is_irq;
4128
4129	for (i = 0; i < gdev->ngpio; i++, gpio++, gdesc++) {
4130		if (!test_bit(FLAG_REQUESTED, &gdesc->flags)) {
4131			if (gdesc->name) {
4132				seq_printf(s, " gpio-%-3d (%-20.20s)\n",
4133					   gpio, gdesc->name);
4134			}
4135			continue;
4136		}
4137
4138		gpiod_get_direction(gdesc);
4139		is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
4140		is_irq = test_bit(FLAG_USED_AS_IRQ, &gdesc->flags);
4141		seq_printf(s, " gpio-%-3d (%-20.20s|%-20.20s) %s %s %s",
4142			gpio, gdesc->name ? gdesc->name : "", gdesc->label,
4143			is_out ? "out" : "in ",
4144			chip->get
4145				? (chip->get(chip, i) ? "hi" : "lo")
4146				: "?  ",
4147			is_irq ? "IRQ" : "   ");
4148		seq_printf(s, "\n");
4149	}
4150}
4151
4152static void *gpiolib_seq_start(struct seq_file *s, loff_t *pos)
4153{
4154	unsigned long flags;
4155	struct gpio_device *gdev = NULL;
4156	loff_t index = *pos;
4157
4158	s->private = "";
4159
4160	spin_lock_irqsave(&gpio_lock, flags);
4161	list_for_each_entry(gdev, &gpio_devices, list)
4162		if (index-- == 0) {
4163			spin_unlock_irqrestore(&gpio_lock, flags);
4164			return gdev;
4165		}
4166	spin_unlock_irqrestore(&gpio_lock, flags);
4167
4168	return NULL;
4169}
4170
4171static void *gpiolib_seq_next(struct seq_file *s, void *v, loff_t *pos)
4172{
4173	unsigned long flags;
4174	struct gpio_device *gdev = v;
4175	void *ret = NULL;
4176
4177	spin_lock_irqsave(&gpio_lock, flags);
4178	if (list_is_last(&gdev->list, &gpio_devices))
4179		ret = NULL;
4180	else
4181		ret = list_entry(gdev->list.next, struct gpio_device, list);
4182	spin_unlock_irqrestore(&gpio_lock, flags);
4183
4184	s->private = "\n";
4185	++*pos;
4186
4187	return ret;
4188}
4189
4190static void gpiolib_seq_stop(struct seq_file *s, void *v)
4191{
4192}
4193
4194static int gpiolib_seq_show(struct seq_file *s, void *v)
4195{
4196	struct gpio_device *gdev = v;
4197	struct gpio_chip *chip = gdev->chip;
4198	struct device *parent;
4199
4200	if (!chip) {
4201		seq_printf(s, "%s%s: (dangling chip)", (char *)s->private,
4202			   dev_name(&gdev->dev));
4203		return 0;
4204	}
4205
4206	seq_printf(s, "%s%s: GPIOs %d-%d", (char *)s->private,
4207		   dev_name(&gdev->dev),
4208		   gdev->base, gdev->base + gdev->ngpio - 1);
4209	parent = chip->parent;
4210	if (parent)
4211		seq_printf(s, ", parent: %s/%s",
4212			   parent->bus ? parent->bus->name : "no-bus",
4213			   dev_name(parent));
4214	if (chip->label)
4215		seq_printf(s, ", %s", chip->label);
4216	if (chip->can_sleep)
4217		seq_printf(s, ", can sleep");
4218	seq_printf(s, ":\n");
4219
4220	if (chip->dbg_show)
4221		chip->dbg_show(s, chip);
4222	else
4223		gpiolib_dbg_show(s, gdev);
4224
4225	return 0;
4226}
4227
4228static const struct seq_operations gpiolib_seq_ops = {
4229	.start = gpiolib_seq_start,
4230	.next = gpiolib_seq_next,
4231	.stop = gpiolib_seq_stop,
4232	.show = gpiolib_seq_show,
4233};
4234
4235static int gpiolib_open(struct inode *inode, struct file *file)
4236{
4237	return seq_open(file, &gpiolib_seq_ops);
4238}
4239
4240static const struct file_operations gpiolib_operations = {
4241	.owner		= THIS_MODULE,
4242	.open		= gpiolib_open,
4243	.read		= seq_read,
4244	.llseek		= seq_lseek,
4245	.release	= seq_release,
4246};
4247
4248static int __init gpiolib_debugfs_init(void)
4249{
4250	/* /sys/kernel/debug/gpio */
4251	(void) debugfs_create_file("gpio", S_IFREG | S_IRUGO,
4252				NULL, NULL, &gpiolib_operations);
4253	return 0;
4254}
4255subsys_initcall(gpiolib_debugfs_init);
4256
4257#endif	/* DEBUG_FS */