Loading...
1/*
2 * Freescale MPC85xx/MPC86xx RapidIO support
3 *
4 * Copyright 2009 Sysgo AG
5 * Thomas Moll <thomas.moll@sysgo.com>
6 * - fixed maintenance access routines, check for aligned access
7 *
8 * Copyright 2009 Integrated Device Technology, Inc.
9 * Alex Bounine <alexandre.bounine@idt.com>
10 * - Added Port-Write message handling
11 * - Added Machine Check exception handling
12 *
13 * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
14 * Zhang Wei <wei.zhang@freescale.com>
15 *
16 * Copyright 2005 MontaVista Software, Inc.
17 * Matt Porter <mporter@kernel.crashing.org>
18 *
19 * This program is free software; you can redistribute it and/or modify it
20 * under the terms of the GNU General Public License as published by the
21 * Free Software Foundation; either version 2 of the License, or (at your
22 * option) any later version.
23 */
24
25#include <linux/init.h>
26#include <linux/extable.h>
27#include <linux/types.h>
28#include <linux/dma-mapping.h>
29#include <linux/interrupt.h>
30#include <linux/device.h>
31#include <linux/of_address.h>
32#include <linux/of_irq.h>
33#include <linux/of_platform.h>
34#include <linux/delay.h>
35#include <linux/slab.h>
36
37#include <linux/io.h>
38#include <linux/uaccess.h>
39#include <asm/machdep.h>
40
41#include "fsl_rio.h"
42
43#undef DEBUG_PW /* Port-Write debugging */
44
45#define RIO_PORT1_EDCSR 0x0640
46#define RIO_PORT2_EDCSR 0x0680
47#define RIO_PORT1_IECSR 0x10130
48#define RIO_PORT2_IECSR 0x101B0
49
50#define RIO_GCCSR 0x13c
51#define RIO_ESCSR 0x158
52#define ESCSR_CLEAR 0x07120204
53#define RIO_PORT2_ESCSR 0x178
54#define RIO_CCSR 0x15c
55#define RIO_LTLEDCSR_IER 0x80000000
56#define RIO_LTLEDCSR_PRT 0x01000000
57#define IECSR_CLEAR 0x80000000
58#define RIO_ISR_AACR 0x10120
59#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
60
61#define RIWTAR_TRAD_VAL_SHIFT 12
62#define RIWTAR_TRAD_MASK 0x00FFFFFF
63#define RIWBAR_BADD_VAL_SHIFT 12
64#define RIWBAR_BADD_MASK 0x003FFFFF
65#define RIWAR_ENABLE 0x80000000
66#define RIWAR_TGINT_LOCAL 0x00F00000
67#define RIWAR_RDTYP_NO_SNOOP 0x00040000
68#define RIWAR_RDTYP_SNOOP 0x00050000
69#define RIWAR_WRTYP_NO_SNOOP 0x00004000
70#define RIWAR_WRTYP_SNOOP 0x00005000
71#define RIWAR_WRTYP_ALLOC 0x00006000
72#define RIWAR_SIZE_MASK 0x0000003F
73
74#define __fsl_read_rio_config(x, addr, err, op) \
75 __asm__ __volatile__( \
76 "1: "op" %1,0(%2)\n" \
77 " eieio\n" \
78 "2:\n" \
79 ".section .fixup,\"ax\"\n" \
80 "3: li %1,-1\n" \
81 " li %0,%3\n" \
82 " b 2b\n" \
83 ".previous\n" \
84 EX_TABLE(1b, 3b) \
85 : "=r" (err), "=r" (x) \
86 : "b" (addr), "i" (-EFAULT), "0" (err))
87
88void __iomem *rio_regs_win;
89void __iomem *rmu_regs_win;
90resource_size_t rio_law_start;
91
92struct fsl_rio_dbell *dbell;
93struct fsl_rio_pw *pw;
94
95#ifdef CONFIG_E500
96int fsl_rio_mcheck_exception(struct pt_regs *regs)
97{
98 const struct exception_table_entry *entry;
99 unsigned long reason;
100
101 if (!rio_regs_win)
102 return 0;
103
104 reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
105 if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
106 /* Check if we are prepared to handle this fault */
107 entry = search_exception_tables(regs->nip);
108 if (entry) {
109 pr_debug("RIO: %s - MC Exception handled\n",
110 __func__);
111 out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
112 0);
113 regs->msr |= MSR_RI;
114 regs->nip = extable_fixup(entry);
115 return 1;
116 }
117 }
118
119 return 0;
120}
121EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
122#endif
123
124/**
125 * fsl_local_config_read - Generate a MPC85xx local config space read
126 * @mport: RapidIO master port info
127 * @index: ID of RapdiIO interface
128 * @offset: Offset into configuration space
129 * @len: Length (in bytes) of the maintenance transaction
130 * @data: Value to be read into
131 *
132 * Generates a MPC85xx local configuration space read. Returns %0 on
133 * success or %-EINVAL on failure.
134 */
135static int fsl_local_config_read(struct rio_mport *mport,
136 int index, u32 offset, int len, u32 *data)
137{
138 struct rio_priv *priv = mport->priv;
139 pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
140 offset);
141 *data = in_be32(priv->regs_win + offset);
142
143 return 0;
144}
145
146/**
147 * fsl_local_config_write - Generate a MPC85xx local config space write
148 * @mport: RapidIO master port info
149 * @index: ID of RapdiIO interface
150 * @offset: Offset into configuration space
151 * @len: Length (in bytes) of the maintenance transaction
152 * @data: Value to be written
153 *
154 * Generates a MPC85xx local configuration space write. Returns %0 on
155 * success or %-EINVAL on failure.
156 */
157static int fsl_local_config_write(struct rio_mport *mport,
158 int index, u32 offset, int len, u32 data)
159{
160 struct rio_priv *priv = mport->priv;
161 pr_debug
162 ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
163 index, offset, data);
164 out_be32(priv->regs_win + offset, data);
165
166 return 0;
167}
168
169/**
170 * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
171 * @mport: RapidIO master port info
172 * @index: ID of RapdiIO interface
173 * @destid: Destination ID of transaction
174 * @hopcount: Number of hops to target device
175 * @offset: Offset into configuration space
176 * @len: Length (in bytes) of the maintenance transaction
177 * @val: Location to be read into
178 *
179 * Generates a MPC85xx read maintenance transaction. Returns %0 on
180 * success or %-EINVAL on failure.
181 */
182static int
183fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
184 u8 hopcount, u32 offset, int len, u32 *val)
185{
186 struct rio_priv *priv = mport->priv;
187 u8 *data;
188 u32 rval, err = 0;
189
190 pr_debug
191 ("fsl_rio_config_read:"
192 " index %d destid %d hopcount %d offset %8.8x len %d\n",
193 index, destid, hopcount, offset, len);
194
195 /* 16MB maintenance window possible */
196 /* allow only aligned access to maintenance registers */
197 if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
198 return -EINVAL;
199
200 out_be32(&priv->maint_atmu_regs->rowtar,
201 (destid << 22) | (hopcount << 12) | (offset >> 12));
202 out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
203
204 data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
205 switch (len) {
206 case 1:
207 __fsl_read_rio_config(rval, data, err, "lbz");
208 break;
209 case 2:
210 __fsl_read_rio_config(rval, data, err, "lhz");
211 break;
212 case 4:
213 __fsl_read_rio_config(rval, data, err, "lwz");
214 break;
215 default:
216 return -EINVAL;
217 }
218
219 if (err) {
220 pr_debug("RIO: cfg_read error %d for %x:%x:%x\n",
221 err, destid, hopcount, offset);
222 }
223
224 *val = rval;
225
226 return err;
227}
228
229/**
230 * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
231 * @mport: RapidIO master port info
232 * @index: ID of RapdiIO interface
233 * @destid: Destination ID of transaction
234 * @hopcount: Number of hops to target device
235 * @offset: Offset into configuration space
236 * @len: Length (in bytes) of the maintenance transaction
237 * @val: Value to be written
238 *
239 * Generates an MPC85xx write maintenance transaction. Returns %0 on
240 * success or %-EINVAL on failure.
241 */
242static int
243fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
244 u8 hopcount, u32 offset, int len, u32 val)
245{
246 struct rio_priv *priv = mport->priv;
247 u8 *data;
248 pr_debug
249 ("fsl_rio_config_write:"
250 " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
251 index, destid, hopcount, offset, len, val);
252
253 /* 16MB maintenance windows possible */
254 /* allow only aligned access to maintenance registers */
255 if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
256 return -EINVAL;
257
258 out_be32(&priv->maint_atmu_regs->rowtar,
259 (destid << 22) | (hopcount << 12) | (offset >> 12));
260 out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
261
262 data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
263 switch (len) {
264 case 1:
265 out_8((u8 *) data, val);
266 break;
267 case 2:
268 out_be16((u16 *) data, val);
269 break;
270 case 4:
271 out_be32((u32 *) data, val);
272 break;
273 default:
274 return -EINVAL;
275 }
276
277 return 0;
278}
279
280static void fsl_rio_inbound_mem_init(struct rio_priv *priv)
281{
282 int i;
283
284 /* close inbound windows */
285 for (i = 0; i < RIO_INB_ATMU_COUNT; i++)
286 out_be32(&priv->inb_atmu_regs[i].riwar, 0);
287}
288
289int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
290 u64 rstart, u64 size, u32 flags)
291{
292 struct rio_priv *priv = mport->priv;
293 u32 base_size;
294 unsigned int base_size_log;
295 u64 win_start, win_end;
296 u32 riwar;
297 int i;
298
299 if ((size & (size - 1)) != 0 || size > 0x400000000ULL)
300 return -EINVAL;
301
302 base_size_log = ilog2(size);
303 base_size = 1 << base_size_log;
304
305 /* check if addresses are aligned with the window size */
306 if (lstart & (base_size - 1))
307 return -EINVAL;
308 if (rstart & (base_size - 1))
309 return -EINVAL;
310
311 /* check for conflicting ranges */
312 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
313 riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
314 if ((riwar & RIWAR_ENABLE) == 0)
315 continue;
316 win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK))
317 << RIWBAR_BADD_VAL_SHIFT;
318 win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1);
319 if (rstart < win_end && (rstart + size) > win_start)
320 return -EINVAL;
321 }
322
323 /* find unused atmu */
324 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
325 riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
326 if ((riwar & RIWAR_ENABLE) == 0)
327 break;
328 }
329 if (i >= RIO_INB_ATMU_COUNT)
330 return -ENOMEM;
331
332 out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT);
333 out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT);
334 out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL |
335 RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1));
336
337 return 0;
338}
339
340void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart)
341{
342 u32 win_start_shift, base_start_shift;
343 struct rio_priv *priv = mport->priv;
344 u32 riwar, riwtar;
345 int i;
346
347 /* skip default window */
348 base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT;
349 for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
350 riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
351 if ((riwar & RIWAR_ENABLE) == 0)
352 continue;
353
354 riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar);
355 win_start_shift = riwtar & RIWTAR_TRAD_MASK;
356 if (win_start_shift == base_start_shift) {
357 out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE);
358 return;
359 }
360 }
361}
362
363void fsl_rio_port_error_handler(int offset)
364{
365 /*XXX: Error recovery is not implemented, we just clear errors */
366 out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
367
368 if (offset == 0) {
369 out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
370 out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
371 out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
372 } else {
373 out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
374 out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
375 out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
376 }
377}
378static inline void fsl_rio_info(struct device *dev, u32 ccsr)
379{
380 const char *str;
381 if (ccsr & 1) {
382 /* Serial phy */
383 switch (ccsr >> 30) {
384 case 0:
385 str = "1";
386 break;
387 case 1:
388 str = "4";
389 break;
390 default:
391 str = "Unknown";
392 break;
393 }
394 dev_info(dev, "Hardware port width: %s\n", str);
395
396 switch ((ccsr >> 27) & 7) {
397 case 0:
398 str = "Single-lane 0";
399 break;
400 case 1:
401 str = "Single-lane 2";
402 break;
403 case 2:
404 str = "Four-lane";
405 break;
406 default:
407 str = "Unknown";
408 break;
409 }
410 dev_info(dev, "Training connection status: %s\n", str);
411 } else {
412 /* Parallel phy */
413 if (!(ccsr & 0x80000000))
414 dev_info(dev, "Output port operating in 8-bit mode\n");
415 if (!(ccsr & 0x08000000))
416 dev_info(dev, "Input port operating in 8-bit mode\n");
417 }
418}
419
420/**
421 * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
422 * @dev: platform_device pointer
423 *
424 * Initializes MPC85xx RapidIO hardware interface, configures
425 * master port with system-specific info, and registers the
426 * master port with the RapidIO subsystem.
427 */
428int fsl_rio_setup(struct platform_device *dev)
429{
430 struct rio_ops *ops;
431 struct rio_mport *port;
432 struct rio_priv *priv;
433 int rc = 0;
434 const u32 *dt_range, *cell, *port_index;
435 u32 active_ports = 0;
436 struct resource regs, rmu_regs;
437 struct device_node *np, *rmu_node;
438 int rlen;
439 u32 ccsr;
440 u64 range_start, range_size;
441 int paw, aw, sw;
442 u32 i;
443 static int tmp;
444 struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};
445
446 if (!dev->dev.of_node) {
447 dev_err(&dev->dev, "Device OF-Node is NULL");
448 return -ENODEV;
449 }
450
451 rc = of_address_to_resource(dev->dev.of_node, 0, ®s);
452 if (rc) {
453 dev_err(&dev->dev, "Can't get %s property 'reg'\n",
454 dev->dev.of_node->full_name);
455 return -EFAULT;
456 }
457 dev_info(&dev->dev, "Of-device full name %s\n",
458 dev->dev.of_node->full_name);
459 dev_info(&dev->dev, "Regs: %pR\n", ®s);
460
461 rio_regs_win = ioremap(regs.start, resource_size(®s));
462 if (!rio_regs_win) {
463 dev_err(&dev->dev, "Unable to map rio register window\n");
464 rc = -ENOMEM;
465 goto err_rio_regs;
466 }
467
468 ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
469 if (!ops) {
470 rc = -ENOMEM;
471 goto err_ops;
472 }
473 ops->lcread = fsl_local_config_read;
474 ops->lcwrite = fsl_local_config_write;
475 ops->cread = fsl_rio_config_read;
476 ops->cwrite = fsl_rio_config_write;
477 ops->dsend = fsl_rio_doorbell_send;
478 ops->pwenable = fsl_rio_pw_enable;
479 ops->open_outb_mbox = fsl_open_outb_mbox;
480 ops->open_inb_mbox = fsl_open_inb_mbox;
481 ops->close_outb_mbox = fsl_close_outb_mbox;
482 ops->close_inb_mbox = fsl_close_inb_mbox;
483 ops->add_outb_message = fsl_add_outb_message;
484 ops->add_inb_buffer = fsl_add_inb_buffer;
485 ops->get_inb_message = fsl_get_inb_message;
486 ops->map_inb = fsl_map_inb_mem;
487 ops->unmap_inb = fsl_unmap_inb_mem;
488
489 rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
490 if (!rmu_node) {
491 dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n");
492 rc = -ENOENT;
493 goto err_rmu;
494 }
495 rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
496 if (rc) {
497 dev_err(&dev->dev, "Can't get %s property 'reg'\n",
498 rmu_node->full_name);
499 goto err_rmu;
500 }
501 rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
502 if (!rmu_regs_win) {
503 dev_err(&dev->dev, "Unable to map rmu register window\n");
504 rc = -ENOMEM;
505 goto err_rmu;
506 }
507 for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") {
508 rmu_np[tmp] = np;
509 tmp++;
510 }
511
512 /*set up doobell node*/
513 np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
514 if (!np) {
515 dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n");
516 rc = -ENODEV;
517 goto err_dbell;
518 }
519 dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL);
520 if (!(dbell)) {
521 dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n");
522 rc = -ENOMEM;
523 goto err_dbell;
524 }
525 dbell->dev = &dev->dev;
526 dbell->bellirq = irq_of_parse_and_map(np, 1);
527 dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);
528
529 aw = of_n_addr_cells(np);
530 dt_range = of_get_property(np, "reg", &rlen);
531 if (!dt_range) {
532 pr_err("%s: unable to find 'reg' property\n",
533 np->full_name);
534 rc = -ENOMEM;
535 goto err_pw;
536 }
537 range_start = of_read_number(dt_range, aw);
538 dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win +
539 (u32)range_start);
540
541 /*set up port write node*/
542 np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
543 if (!np) {
544 dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n");
545 rc = -ENODEV;
546 goto err_pw;
547 }
548 pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL);
549 if (!(pw)) {
550 dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n");
551 rc = -ENOMEM;
552 goto err_pw;
553 }
554 pw->dev = &dev->dev;
555 pw->pwirq = irq_of_parse_and_map(np, 0);
556 dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
557 aw = of_n_addr_cells(np);
558 dt_range = of_get_property(np, "reg", &rlen);
559 if (!dt_range) {
560 pr_err("%s: unable to find 'reg' property\n",
561 np->full_name);
562 rc = -ENOMEM;
563 goto err;
564 }
565 range_start = of_read_number(dt_range, aw);
566 pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start);
567
568 /*set up ports node*/
569 for_each_child_of_node(dev->dev.of_node, np) {
570 port_index = of_get_property(np, "cell-index", NULL);
571 if (!port_index) {
572 dev_err(&dev->dev, "Can't get %s property 'cell-index'\n",
573 np->full_name);
574 continue;
575 }
576
577 dt_range = of_get_property(np, "ranges", &rlen);
578 if (!dt_range) {
579 dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
580 np->full_name);
581 continue;
582 }
583
584 /* Get node address wide */
585 cell = of_get_property(np, "#address-cells", NULL);
586 if (cell)
587 aw = *cell;
588 else
589 aw = of_n_addr_cells(np);
590 /* Get node size wide */
591 cell = of_get_property(np, "#size-cells", NULL);
592 if (cell)
593 sw = *cell;
594 else
595 sw = of_n_size_cells(np);
596 /* Get parent address wide wide */
597 paw = of_n_addr_cells(np);
598 range_start = of_read_number(dt_range + aw, paw);
599 range_size = of_read_number(dt_range + aw + paw, sw);
600
601 dev_info(&dev->dev, "%s: LAW start 0x%016llx, size 0x%016llx.\n",
602 np->full_name, range_start, range_size);
603
604 port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
605 if (!port)
606 continue;
607
608 rc = rio_mport_initialize(port);
609 if (rc) {
610 kfree(port);
611 continue;
612 }
613
614 i = *port_index - 1;
615 port->index = (unsigned char)i;
616
617 priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
618 if (!priv) {
619 dev_err(&dev->dev, "Can't alloc memory for 'priv'\n");
620 kfree(port);
621 continue;
622 }
623
624 INIT_LIST_HEAD(&port->dbells);
625 port->iores.start = range_start;
626 port->iores.end = port->iores.start + range_size - 1;
627 port->iores.flags = IORESOURCE_MEM;
628 port->iores.name = "rio_io_win";
629
630 if (request_resource(&iomem_resource, &port->iores) < 0) {
631 dev_err(&dev->dev, "RIO: Error requesting master port region"
632 " 0x%016llx-0x%016llx\n",
633 (u64)port->iores.start, (u64)port->iores.end);
634 kfree(priv);
635 kfree(port);
636 continue;
637 }
638 sprintf(port->name, "RIO mport %d", i);
639
640 priv->dev = &dev->dev;
641 port->dev.parent = &dev->dev;
642 port->ops = ops;
643 port->priv = priv;
644 port->phys_efptr = 0x100;
645 port->phys_rmap = 1;
646 priv->regs_win = rio_regs_win;
647
648 ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
649
650 /* Checking the port training status */
651 if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
652 dev_err(&dev->dev, "Port %d is not ready. "
653 "Try to restart connection...\n", i);
654 /* Disable ports */
655 out_be32(priv->regs_win
656 + RIO_CCSR + i*0x20, 0);
657 /* Set 1x lane */
658 setbits32(priv->regs_win
659 + RIO_CCSR + i*0x20, 0x02000000);
660 /* Enable ports */
661 setbits32(priv->regs_win
662 + RIO_CCSR + i*0x20, 0x00600000);
663 msleep(100);
664 if (in_be32((priv->regs_win
665 + RIO_ESCSR + i*0x20)) & 1) {
666 dev_err(&dev->dev,
667 "Port %d restart failed.\n", i);
668 release_resource(&port->iores);
669 kfree(priv);
670 kfree(port);
671 continue;
672 }
673 dev_info(&dev->dev, "Port %d restart success!\n", i);
674 }
675 fsl_rio_info(&dev->dev, ccsr);
676
677 port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
678 & RIO_PEF_CTLS) >> 4;
679 dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
680 port->sys_size ? 65536 : 256);
681
682 if (port->host_deviceid >= 0)
683 out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
684 RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
685 else
686 out_be32(priv->regs_win + RIO_GCCSR,
687 RIO_PORT_GEN_MASTER);
688
689 priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
690 + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
691 RIO_ATMU_REGS_PORT2_OFFSET));
692
693 priv->maint_atmu_regs = priv->atmu_regs + 1;
694 priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *)
695 (priv->regs_win +
696 ((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET :
697 RIO_INB_ATMU_REGS_PORT2_OFFSET));
698
699 /* Set to receive packets with any dest ID */
700 out_be32((priv->regs_win + RIO_ISR_AACR + i*0x80),
701 RIO_ISR_AACR_AA);
702
703 /* Configure maintenance transaction window */
704 out_be32(&priv->maint_atmu_regs->rowbar,
705 port->iores.start >> 12);
706 out_be32(&priv->maint_atmu_regs->rowar,
707 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
708
709 priv->maint_win = ioremap(port->iores.start,
710 RIO_MAINT_WIN_SIZE);
711
712 rio_law_start = range_start;
713
714 fsl_rio_setup_rmu(port, rmu_np[i]);
715 fsl_rio_inbound_mem_init(priv);
716
717 dbell->mport[i] = port;
718 pw->mport[i] = port;
719
720 if (rio_register_mport(port)) {
721 release_resource(&port->iores);
722 kfree(priv);
723 kfree(port);
724 continue;
725 }
726 active_ports++;
727 }
728
729 if (!active_ports) {
730 rc = -ENOLINK;
731 goto err;
732 }
733
734 fsl_rio_doorbell_init(dbell);
735 fsl_rio_port_write_init(pw);
736
737 return 0;
738err:
739 kfree(pw);
740 pw = NULL;
741err_pw:
742 kfree(dbell);
743 dbell = NULL;
744err_dbell:
745 iounmap(rmu_regs_win);
746 rmu_regs_win = NULL;
747err_rmu:
748 kfree(ops);
749err_ops:
750 iounmap(rio_regs_win);
751 rio_regs_win = NULL;
752err_rio_regs:
753 return rc;
754}
755
756/* The probe function for RapidIO peer-to-peer network.
757 */
758static int fsl_of_rio_rpn_probe(struct platform_device *dev)
759{
760 printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
761 dev->dev.of_node->full_name);
762
763 return fsl_rio_setup(dev);
764};
765
766static const struct of_device_id fsl_of_rio_rpn_ids[] = {
767 {
768 .compatible = "fsl,srio",
769 },
770 {},
771};
772
773static struct platform_driver fsl_of_rio_rpn_driver = {
774 .driver = {
775 .name = "fsl-of-rio",
776 .of_match_table = fsl_of_rio_rpn_ids,
777 },
778 .probe = fsl_of_rio_rpn_probe,
779};
780
781static __init int fsl_of_rio_rpn_init(void)
782{
783 return platform_driver_register(&fsl_of_rio_rpn_driver);
784}
785
786subsys_initcall(fsl_of_rio_rpn_init);
1/*
2 * Freescale MPC85xx/MPC86xx RapidIO support
3 *
4 * Copyright 2009 Sysgo AG
5 * Thomas Moll <thomas.moll@sysgo.com>
6 * - fixed maintenance access routines, check for aligned access
7 *
8 * Copyright 2009 Integrated Device Technology, Inc.
9 * Alex Bounine <alexandre.bounine@idt.com>
10 * - Added Port-Write message handling
11 * - Added Machine Check exception handling
12 *
13 * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
14 * Zhang Wei <wei.zhang@freescale.com>
15 *
16 * Copyright 2005 MontaVista Software, Inc.
17 * Matt Porter <mporter@kernel.crashing.org>
18 *
19 * This program is free software; you can redistribute it and/or modify it
20 * under the terms of the GNU General Public License as published by the
21 * Free Software Foundation; either version 2 of the License, or (at your
22 * option) any later version.
23 */
24
25#include <linux/init.h>
26#include <linux/module.h>
27#include <linux/types.h>
28#include <linux/dma-mapping.h>
29#include <linux/interrupt.h>
30#include <linux/device.h>
31#include <linux/of_platform.h>
32#include <linux/delay.h>
33#include <linux/slab.h>
34
35#include <linux/io.h>
36#include <linux/uaccess.h>
37#include <asm/machdep.h>
38
39#include "fsl_rio.h"
40
41#undef DEBUG_PW /* Port-Write debugging */
42
43#define RIO_PORT1_EDCSR 0x0640
44#define RIO_PORT2_EDCSR 0x0680
45#define RIO_PORT1_IECSR 0x10130
46#define RIO_PORT2_IECSR 0x101B0
47
48#define RIO_GCCSR 0x13c
49#define RIO_ESCSR 0x158
50#define ESCSR_CLEAR 0x07120204
51#define RIO_PORT2_ESCSR 0x178
52#define RIO_CCSR 0x15c
53#define RIO_LTLEDCSR_IER 0x80000000
54#define RIO_LTLEDCSR_PRT 0x01000000
55#define IECSR_CLEAR 0x80000000
56#define RIO_ISR_AACR 0x10120
57#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
58
59#define __fsl_read_rio_config(x, addr, err, op) \
60 __asm__ __volatile__( \
61 "1: "op" %1,0(%2)\n" \
62 " eieio\n" \
63 "2:\n" \
64 ".section .fixup,\"ax\"\n" \
65 "3: li %1,-1\n" \
66 " li %0,%3\n" \
67 " b 2b\n" \
68 ".section __ex_table,\"a\"\n" \
69 PPC_LONG_ALIGN "\n" \
70 PPC_LONG "1b,3b\n" \
71 ".text" \
72 : "=r" (err), "=r" (x) \
73 : "b" (addr), "i" (-EFAULT), "0" (err))
74
75void __iomem *rio_regs_win;
76void __iomem *rmu_regs_win;
77resource_size_t rio_law_start;
78
79struct fsl_rio_dbell *dbell;
80struct fsl_rio_pw *pw;
81
82#ifdef CONFIG_E500
83int fsl_rio_mcheck_exception(struct pt_regs *regs)
84{
85 const struct exception_table_entry *entry;
86 unsigned long reason;
87
88 if (!rio_regs_win)
89 return 0;
90
91 reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
92 if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
93 /* Check if we are prepared to handle this fault */
94 entry = search_exception_tables(regs->nip);
95 if (entry) {
96 pr_debug("RIO: %s - MC Exception handled\n",
97 __func__);
98 out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
99 0);
100 regs->msr |= MSR_RI;
101 regs->nip = entry->fixup;
102 return 1;
103 }
104 }
105
106 return 0;
107}
108EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
109#endif
110
111/**
112 * fsl_local_config_read - Generate a MPC85xx local config space read
113 * @mport: RapidIO master port info
114 * @index: ID of RapdiIO interface
115 * @offset: Offset into configuration space
116 * @len: Length (in bytes) of the maintenance transaction
117 * @data: Value to be read into
118 *
119 * Generates a MPC85xx local configuration space read. Returns %0 on
120 * success or %-EINVAL on failure.
121 */
122static int fsl_local_config_read(struct rio_mport *mport,
123 int index, u32 offset, int len, u32 *data)
124{
125 struct rio_priv *priv = mport->priv;
126 pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
127 offset);
128 *data = in_be32(priv->regs_win + offset);
129
130 return 0;
131}
132
133/**
134 * fsl_local_config_write - Generate a MPC85xx local config space write
135 * @mport: RapidIO master port info
136 * @index: ID of RapdiIO interface
137 * @offset: Offset into configuration space
138 * @len: Length (in bytes) of the maintenance transaction
139 * @data: Value to be written
140 *
141 * Generates a MPC85xx local configuration space write. Returns %0 on
142 * success or %-EINVAL on failure.
143 */
144static int fsl_local_config_write(struct rio_mport *mport,
145 int index, u32 offset, int len, u32 data)
146{
147 struct rio_priv *priv = mport->priv;
148 pr_debug
149 ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
150 index, offset, data);
151 out_be32(priv->regs_win + offset, data);
152
153 return 0;
154}
155
156/**
157 * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
158 * @mport: RapidIO master port info
159 * @index: ID of RapdiIO interface
160 * @destid: Destination ID of transaction
161 * @hopcount: Number of hops to target device
162 * @offset: Offset into configuration space
163 * @len: Length (in bytes) of the maintenance transaction
164 * @val: Location to be read into
165 *
166 * Generates a MPC85xx read maintenance transaction. Returns %0 on
167 * success or %-EINVAL on failure.
168 */
169static int
170fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
171 u8 hopcount, u32 offset, int len, u32 *val)
172{
173 struct rio_priv *priv = mport->priv;
174 u8 *data;
175 u32 rval, err = 0;
176
177 pr_debug
178 ("fsl_rio_config_read:"
179 " index %d destid %d hopcount %d offset %8.8x len %d\n",
180 index, destid, hopcount, offset, len);
181
182 /* 16MB maintenance window possible */
183 /* allow only aligned access to maintenance registers */
184 if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
185 return -EINVAL;
186
187 out_be32(&priv->maint_atmu_regs->rowtar,
188 (destid << 22) | (hopcount << 12) | (offset >> 12));
189 out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
190
191 data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
192 switch (len) {
193 case 1:
194 __fsl_read_rio_config(rval, data, err, "lbz");
195 break;
196 case 2:
197 __fsl_read_rio_config(rval, data, err, "lhz");
198 break;
199 case 4:
200 __fsl_read_rio_config(rval, data, err, "lwz");
201 break;
202 default:
203 return -EINVAL;
204 }
205
206 if (err) {
207 pr_debug("RIO: cfg_read error %d for %x:%x:%x\n",
208 err, destid, hopcount, offset);
209 }
210
211 *val = rval;
212
213 return err;
214}
215
216/**
217 * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
218 * @mport: RapidIO master port info
219 * @index: ID of RapdiIO interface
220 * @destid: Destination ID of transaction
221 * @hopcount: Number of hops to target device
222 * @offset: Offset into configuration space
223 * @len: Length (in bytes) of the maintenance transaction
224 * @val: Value to be written
225 *
226 * Generates an MPC85xx write maintenance transaction. Returns %0 on
227 * success or %-EINVAL on failure.
228 */
229static int
230fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
231 u8 hopcount, u32 offset, int len, u32 val)
232{
233 struct rio_priv *priv = mport->priv;
234 u8 *data;
235 pr_debug
236 ("fsl_rio_config_write:"
237 " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
238 index, destid, hopcount, offset, len, val);
239
240 /* 16MB maintenance windows possible */
241 /* allow only aligned access to maintenance registers */
242 if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
243 return -EINVAL;
244
245 out_be32(&priv->maint_atmu_regs->rowtar,
246 (destid << 22) | (hopcount << 12) | (offset >> 12));
247 out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
248
249 data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
250 switch (len) {
251 case 1:
252 out_8((u8 *) data, val);
253 break;
254 case 2:
255 out_be16((u16 *) data, val);
256 break;
257 case 4:
258 out_be32((u32 *) data, val);
259 break;
260 default:
261 return -EINVAL;
262 }
263
264 return 0;
265}
266
267void fsl_rio_port_error_handler(int offset)
268{
269 /*XXX: Error recovery is not implemented, we just clear errors */
270 out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
271
272 if (offset == 0) {
273 out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
274 out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
275 out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
276 } else {
277 out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
278 out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
279 out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
280 }
281}
282static inline void fsl_rio_info(struct device *dev, u32 ccsr)
283{
284 const char *str;
285 if (ccsr & 1) {
286 /* Serial phy */
287 switch (ccsr >> 30) {
288 case 0:
289 str = "1";
290 break;
291 case 1:
292 str = "4";
293 break;
294 default:
295 str = "Unknown";
296 break;
297 }
298 dev_info(dev, "Hardware port width: %s\n", str);
299
300 switch ((ccsr >> 27) & 7) {
301 case 0:
302 str = "Single-lane 0";
303 break;
304 case 1:
305 str = "Single-lane 2";
306 break;
307 case 2:
308 str = "Four-lane";
309 break;
310 default:
311 str = "Unknown";
312 break;
313 }
314 dev_info(dev, "Training connection status: %s\n", str);
315 } else {
316 /* Parallel phy */
317 if (!(ccsr & 0x80000000))
318 dev_info(dev, "Output port operating in 8-bit mode\n");
319 if (!(ccsr & 0x08000000))
320 dev_info(dev, "Input port operating in 8-bit mode\n");
321 }
322}
323
324/**
325 * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
326 * @dev: platform_device pointer
327 *
328 * Initializes MPC85xx RapidIO hardware interface, configures
329 * master port with system-specific info, and registers the
330 * master port with the RapidIO subsystem.
331 */
332int fsl_rio_setup(struct platform_device *dev)
333{
334 struct rio_ops *ops;
335 struct rio_mport *port;
336 struct rio_priv *priv;
337 int rc = 0;
338 const u32 *dt_range, *cell, *port_index;
339 u32 active_ports = 0;
340 struct resource regs, rmu_regs;
341 struct device_node *np, *rmu_node;
342 int rlen;
343 u32 ccsr;
344 u64 range_start, range_size;
345 int paw, aw, sw;
346 u32 i;
347 static int tmp;
348 struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};
349
350 if (!dev->dev.of_node) {
351 dev_err(&dev->dev, "Device OF-Node is NULL");
352 return -ENODEV;
353 }
354
355 rc = of_address_to_resource(dev->dev.of_node, 0, ®s);
356 if (rc) {
357 dev_err(&dev->dev, "Can't get %s property 'reg'\n",
358 dev->dev.of_node->full_name);
359 return -EFAULT;
360 }
361 dev_info(&dev->dev, "Of-device full name %s\n",
362 dev->dev.of_node->full_name);
363 dev_info(&dev->dev, "Regs: %pR\n", ®s);
364
365 rio_regs_win = ioremap(regs.start, resource_size(®s));
366 if (!rio_regs_win) {
367 dev_err(&dev->dev, "Unable to map rio register window\n");
368 rc = -ENOMEM;
369 goto err_rio_regs;
370 }
371
372 ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
373 if (!ops) {
374 rc = -ENOMEM;
375 goto err_ops;
376 }
377 ops->lcread = fsl_local_config_read;
378 ops->lcwrite = fsl_local_config_write;
379 ops->cread = fsl_rio_config_read;
380 ops->cwrite = fsl_rio_config_write;
381 ops->dsend = fsl_rio_doorbell_send;
382 ops->pwenable = fsl_rio_pw_enable;
383 ops->open_outb_mbox = fsl_open_outb_mbox;
384 ops->open_inb_mbox = fsl_open_inb_mbox;
385 ops->close_outb_mbox = fsl_close_outb_mbox;
386 ops->close_inb_mbox = fsl_close_inb_mbox;
387 ops->add_outb_message = fsl_add_outb_message;
388 ops->add_inb_buffer = fsl_add_inb_buffer;
389 ops->get_inb_message = fsl_get_inb_message;
390
391 rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
392 if (!rmu_node)
393 goto err_rmu;
394 rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
395 if (rc) {
396 dev_err(&dev->dev, "Can't get %s property 'reg'\n",
397 rmu_node->full_name);
398 goto err_rmu;
399 }
400 rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
401 if (!rmu_regs_win) {
402 dev_err(&dev->dev, "Unable to map rmu register window\n");
403 rc = -ENOMEM;
404 goto err_rmu;
405 }
406 for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") {
407 rmu_np[tmp] = np;
408 tmp++;
409 }
410
411 /*set up doobell node*/
412 np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
413 if (!np) {
414 rc = -ENODEV;
415 goto err_dbell;
416 }
417 dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL);
418 if (!(dbell)) {
419 dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n");
420 rc = -ENOMEM;
421 goto err_dbell;
422 }
423 dbell->dev = &dev->dev;
424 dbell->bellirq = irq_of_parse_and_map(np, 1);
425 dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);
426
427 aw = of_n_addr_cells(np);
428 dt_range = of_get_property(np, "reg", &rlen);
429 if (!dt_range) {
430 pr_err("%s: unable to find 'reg' property\n",
431 np->full_name);
432 rc = -ENOMEM;
433 goto err_pw;
434 }
435 range_start = of_read_number(dt_range, aw);
436 dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win +
437 (u32)range_start);
438
439 /*set up port write node*/
440 np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
441 if (!np) {
442 rc = -ENODEV;
443 goto err_pw;
444 }
445 pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL);
446 if (!(pw)) {
447 dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n");
448 rc = -ENOMEM;
449 goto err_pw;
450 }
451 pw->dev = &dev->dev;
452 pw->pwirq = irq_of_parse_and_map(np, 0);
453 dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
454 aw = of_n_addr_cells(np);
455 dt_range = of_get_property(np, "reg", &rlen);
456 if (!dt_range) {
457 pr_err("%s: unable to find 'reg' property\n",
458 np->full_name);
459 rc = -ENOMEM;
460 goto err;
461 }
462 range_start = of_read_number(dt_range, aw);
463 pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start);
464
465 /*set up ports node*/
466 for_each_child_of_node(dev->dev.of_node, np) {
467 port_index = of_get_property(np, "cell-index", NULL);
468 if (!port_index) {
469 dev_err(&dev->dev, "Can't get %s property 'cell-index'\n",
470 np->full_name);
471 continue;
472 }
473
474 dt_range = of_get_property(np, "ranges", &rlen);
475 if (!dt_range) {
476 dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
477 np->full_name);
478 continue;
479 }
480
481 /* Get node address wide */
482 cell = of_get_property(np, "#address-cells", NULL);
483 if (cell)
484 aw = *cell;
485 else
486 aw = of_n_addr_cells(np);
487 /* Get node size wide */
488 cell = of_get_property(np, "#size-cells", NULL);
489 if (cell)
490 sw = *cell;
491 else
492 sw = of_n_size_cells(np);
493 /* Get parent address wide wide */
494 paw = of_n_addr_cells(np);
495 range_start = of_read_number(dt_range + aw, paw);
496 range_size = of_read_number(dt_range + aw + paw, sw);
497
498 dev_info(&dev->dev, "%s: LAW start 0x%016llx, size 0x%016llx.\n",
499 np->full_name, range_start, range_size);
500
501 port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
502 if (!port)
503 continue;
504
505 i = *port_index - 1;
506 port->index = (unsigned char)i;
507
508 priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
509 if (!priv) {
510 dev_err(&dev->dev, "Can't alloc memory for 'priv'\n");
511 kfree(port);
512 continue;
513 }
514
515 INIT_LIST_HEAD(&port->dbells);
516 port->iores.start = range_start;
517 port->iores.end = port->iores.start + range_size - 1;
518 port->iores.flags = IORESOURCE_MEM;
519 port->iores.name = "rio_io_win";
520
521 if (request_resource(&iomem_resource, &port->iores) < 0) {
522 dev_err(&dev->dev, "RIO: Error requesting master port region"
523 " 0x%016llx-0x%016llx\n",
524 (u64)port->iores.start, (u64)port->iores.end);
525 kfree(priv);
526 kfree(port);
527 continue;
528 }
529 sprintf(port->name, "RIO mport %d", i);
530
531 priv->dev = &dev->dev;
532 port->ops = ops;
533 port->priv = priv;
534 port->phys_efptr = 0x100;
535 priv->regs_win = rio_regs_win;
536
537 /* Probe the master port phy type */
538 ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
539 port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
540 if (port->phy_type == RIO_PHY_PARALLEL) {
541 dev_err(&dev->dev, "RIO: Parallel PHY type, unsupported port type!\n");
542 release_resource(&port->iores);
543 kfree(priv);
544 kfree(port);
545 continue;
546 }
547 dev_info(&dev->dev, "RapidIO PHY type: Serial\n");
548 /* Checking the port training status */
549 if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
550 dev_err(&dev->dev, "Port %d is not ready. "
551 "Try to restart connection...\n", i);
552 /* Disable ports */
553 out_be32(priv->regs_win
554 + RIO_CCSR + i*0x20, 0);
555 /* Set 1x lane */
556 setbits32(priv->regs_win
557 + RIO_CCSR + i*0x20, 0x02000000);
558 /* Enable ports */
559 setbits32(priv->regs_win
560 + RIO_CCSR + i*0x20, 0x00600000);
561 msleep(100);
562 if (in_be32((priv->regs_win
563 + RIO_ESCSR + i*0x20)) & 1) {
564 dev_err(&dev->dev,
565 "Port %d restart failed.\n", i);
566 release_resource(&port->iores);
567 kfree(priv);
568 kfree(port);
569 continue;
570 }
571 dev_info(&dev->dev, "Port %d restart success!\n", i);
572 }
573 fsl_rio_info(&dev->dev, ccsr);
574
575 port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
576 & RIO_PEF_CTLS) >> 4;
577 dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
578 port->sys_size ? 65536 : 256);
579
580 if (rio_register_mport(port)) {
581 release_resource(&port->iores);
582 kfree(priv);
583 kfree(port);
584 continue;
585 }
586 if (port->host_deviceid >= 0)
587 out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
588 RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
589 else
590 out_be32(priv->regs_win + RIO_GCCSR,
591 RIO_PORT_GEN_MASTER);
592
593 priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
594 + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
595 RIO_ATMU_REGS_PORT2_OFFSET));
596
597 priv->maint_atmu_regs = priv->atmu_regs + 1;
598
599 /* Set to receive any dist ID for serial RapidIO controller. */
600 if (port->phy_type == RIO_PHY_SERIAL)
601 out_be32((priv->regs_win
602 + RIO_ISR_AACR + i*0x80), RIO_ISR_AACR_AA);
603
604 /* Configure maintenance transaction window */
605 out_be32(&priv->maint_atmu_regs->rowbar,
606 port->iores.start >> 12);
607 out_be32(&priv->maint_atmu_regs->rowar,
608 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
609
610 priv->maint_win = ioremap(port->iores.start,
611 RIO_MAINT_WIN_SIZE);
612
613 rio_law_start = range_start;
614
615 fsl_rio_setup_rmu(port, rmu_np[i]);
616
617 dbell->mport[i] = port;
618
619 active_ports++;
620 }
621
622 if (!active_ports) {
623 rc = -ENOLINK;
624 goto err;
625 }
626
627 fsl_rio_doorbell_init(dbell);
628 fsl_rio_port_write_init(pw);
629
630 return 0;
631err:
632 kfree(pw);
633err_pw:
634 kfree(dbell);
635err_dbell:
636 iounmap(rmu_regs_win);
637err_rmu:
638 kfree(ops);
639err_ops:
640 iounmap(rio_regs_win);
641err_rio_regs:
642 return rc;
643}
644
645/* The probe function for RapidIO peer-to-peer network.
646 */
647static int __devinit fsl_of_rio_rpn_probe(struct platform_device *dev)
648{
649 printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
650 dev->dev.of_node->full_name);
651
652 return fsl_rio_setup(dev);
653};
654
655static const struct of_device_id fsl_of_rio_rpn_ids[] = {
656 {
657 .compatible = "fsl,srio",
658 },
659 {},
660};
661
662static struct platform_driver fsl_of_rio_rpn_driver = {
663 .driver = {
664 .name = "fsl-of-rio",
665 .owner = THIS_MODULE,
666 .of_match_table = fsl_of_rio_rpn_ids,
667 },
668 .probe = fsl_of_rio_rpn_probe,
669};
670
671static __init int fsl_of_rio_rpn_init(void)
672{
673 return platform_driver_register(&fsl_of_rio_rpn_driver);
674}
675
676subsys_initcall(fsl_of_rio_rpn_init);