Loading...
1/*
2 * Copyright 2000, 2007-2008 MontaVista Software Inc.
3 * Author: MontaVista Software, Inc. <source@mvista.com
4 *
5 * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
11 *
12 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
13 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
15 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
16 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
17 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
18 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
19 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
20 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
21 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
22 *
23 * You should have received a copy of the GNU General Public License along
24 * with this program; if not, write to the Free Software Foundation, Inc.,
25 * 675 Mass Ave, Cambridge, MA 02139, USA.
26 */
27
28#include <linux/init.h>
29#include <linux/ioport.h>
30
31#include <asm/dma-coherence.h>
32#include <asm/mipsregs.h>
33
34#include <au1000.h>
35
36extern void __init board_setup(void);
37extern void __init alchemy_set_lpj(void);
38
39void __init plat_mem_setup(void)
40{
41 alchemy_set_lpj();
42
43 if (au1xxx_cpu_needs_config_od())
44 /* Various early Au1xx0 errata corrected by this */
45 set_c0_config(1 << 19); /* Set Config[OD] */
46 else
47 /* Clear to obtain best system bus performance */
48 clear_c0_config(1 << 19); /* Clear Config[OD] */
49
50 hw_coherentio = 0;
51 coherentio = IO_COHERENCE_ENABLED;
52 switch (alchemy_get_cputype()) {
53 case ALCHEMY_CPU_AU1000:
54 case ALCHEMY_CPU_AU1500:
55 case ALCHEMY_CPU_AU1100:
56 coherentio = IO_COHERENCE_DISABLED;
57 break;
58 case ALCHEMY_CPU_AU1200:
59 /* Au1200 AB USB does not support coherent memory */
60 if (0 == (read_c0_prid() & PRID_REV_MASK))
61 coherentio = IO_COHERENCE_DISABLED;
62 break;
63 }
64
65 board_setup(); /* board specific setup */
66
67 /* IO/MEM resources. */
68 set_io_port_base(0);
69 ioport_resource.start = IOPORT_RESOURCE_START;
70 ioport_resource.end = IOPORT_RESOURCE_END;
71 iomem_resource.start = IOMEM_RESOURCE_START;
72 iomem_resource.end = IOMEM_RESOURCE_END;
73}
74
75#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
76/* This routine should be valid for all Au1x based boards */
77phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
78{
79 unsigned long start = ALCHEMY_PCI_MEMWIN_START;
80 unsigned long end = ALCHEMY_PCI_MEMWIN_END;
81
82 /* Don't fixup 36-bit addresses */
83 if ((phys_addr >> 32) != 0)
84 return phys_addr;
85
86 /* Check for PCI memory window */
87 if (phys_addr >= start && (phys_addr + size - 1) <= end)
88 return (phys_addr_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr);
89
90 /* default nop */
91 return phys_addr;
92}
93EXPORT_SYMBOL(__fixup_bigphys_addr);
94#endif
1/*
2 * Copyright 2000, 2007-2008 MontaVista Software Inc.
3 * Author: MontaVista Software, Inc. <source@mvista.com
4 *
5 * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
11 *
12 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
13 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
15 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
16 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
17 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
18 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
19 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
20 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
21 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
22 *
23 * You should have received a copy of the GNU General Public License along
24 * with this program; if not, write to the Free Software Foundation, Inc.,
25 * 675 Mass Ave, Cambridge, MA 02139, USA.
26 */
27
28#include <linux/init.h>
29#include <linux/ioport.h>
30#include <linux/jiffies.h>
31#include <linux/module.h>
32
33#include <asm/mipsregs.h>
34#include <asm/time.h>
35
36#include <au1000.h>
37
38extern void __init board_setup(void);
39extern void set_cpuspec(void);
40
41void __init plat_mem_setup(void)
42{
43 unsigned long est_freq;
44
45 /* determine core clock */
46 est_freq = au1xxx_calc_clock();
47 est_freq += 5000; /* round */
48 est_freq -= est_freq % 10000;
49 printk(KERN_INFO "(PRId %08x) @ %lu.%02lu MHz\n", read_c0_prid(),
50 est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
51
52 /* this is faster than wasting cycles trying to approximate it */
53 preset_lpj = (est_freq >> 1) / HZ;
54
55 if (au1xxx_cpu_needs_config_od())
56 /* Various early Au1xx0 errata corrected by this */
57 set_c0_config(1 << 19); /* Set Config[OD] */
58 else
59 /* Clear to obtain best system bus performance */
60 clear_c0_config(1 << 19); /* Clear Config[OD] */
61
62 board_setup(); /* board specific setup */
63
64 /* IO/MEM resources. */
65 set_io_port_base(0);
66 ioport_resource.start = IOPORT_RESOURCE_START;
67 ioport_resource.end = IOPORT_RESOURCE_END;
68 iomem_resource.start = IOMEM_RESOURCE_START;
69 iomem_resource.end = IOMEM_RESOURCE_END;
70}
71
72#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI)
73/* This routine should be valid for all Au1x based boards */
74phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
75{
76 unsigned long start = ALCHEMY_PCI_MEMWIN_START;
77 unsigned long end = ALCHEMY_PCI_MEMWIN_END;
78
79 /* Don't fixup 36-bit addresses */
80 if ((phys_addr >> 32) != 0)
81 return phys_addr;
82
83 /* Check for PCI memory window */
84 if (phys_addr >= start && (phys_addr + size - 1) <= end)
85 return (phys_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr);
86
87 /* default nop */
88 return phys_addr;
89}
90EXPORT_SYMBOL(__fixup_bigphys_addr);
91#endif