Loading...
1/*
2 * ntc_thermistor.c - NTC Thermistors
3 *
4 * Copyright (C) 2010 Samsung Electronics
5 * MyungJoo Ham <myungjoo.ham@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 *
21 */
22
23#include <linux/slab.h>
24#include <linux/module.h>
25#include <linux/pm_runtime.h>
26#include <linux/math64.h>
27#include <linux/platform_device.h>
28#include <linux/err.h>
29#include <linux/of.h>
30#include <linux/of_device.h>
31
32#include <linux/platform_data/ntc_thermistor.h>
33
34#include <linux/iio/iio.h>
35#include <linux/iio/machine.h>
36#include <linux/iio/driver.h>
37#include <linux/iio/consumer.h>
38
39#include <linux/hwmon.h>
40#include <linux/hwmon-sysfs.h>
41#include <linux/thermal.h>
42
43struct ntc_compensation {
44 int temp_c;
45 unsigned int ohm;
46};
47
48/* Order matters, ntc_match references the entries by index */
49static const struct platform_device_id ntc_thermistor_id[] = {
50 { "ncp15wb473", TYPE_NCPXXWB473 },
51 { "ncp18wb473", TYPE_NCPXXWB473 },
52 { "ncp21wb473", TYPE_NCPXXWB473 },
53 { "ncp03wb473", TYPE_NCPXXWB473 },
54 { "ncp15wl333", TYPE_NCPXXWL333 },
55 { "b57330v2103", TYPE_B57330V2103},
56 { "ncp03wf104", TYPE_NCPXXWF104 },
57 { "ncp15xh103", TYPE_NCPXXXH103 },
58 { },
59};
60
61/*
62 * A compensation table should be sorted by the values of .ohm
63 * in descending order.
64 * The following compensation tables are from the specification of Murata NTC
65 * Thermistors Datasheet
66 */
67static const struct ntc_compensation ncpXXwb473[] = {
68 { .temp_c = -40, .ohm = 1747920 },
69 { .temp_c = -35, .ohm = 1245428 },
70 { .temp_c = -30, .ohm = 898485 },
71 { .temp_c = -25, .ohm = 655802 },
72 { .temp_c = -20, .ohm = 483954 },
73 { .temp_c = -15, .ohm = 360850 },
74 { .temp_c = -10, .ohm = 271697 },
75 { .temp_c = -5, .ohm = 206463 },
76 { .temp_c = 0, .ohm = 158214 },
77 { .temp_c = 5, .ohm = 122259 },
78 { .temp_c = 10, .ohm = 95227 },
79 { .temp_c = 15, .ohm = 74730 },
80 { .temp_c = 20, .ohm = 59065 },
81 { .temp_c = 25, .ohm = 47000 },
82 { .temp_c = 30, .ohm = 37643 },
83 { .temp_c = 35, .ohm = 30334 },
84 { .temp_c = 40, .ohm = 24591 },
85 { .temp_c = 45, .ohm = 20048 },
86 { .temp_c = 50, .ohm = 16433 },
87 { .temp_c = 55, .ohm = 13539 },
88 { .temp_c = 60, .ohm = 11209 },
89 { .temp_c = 65, .ohm = 9328 },
90 { .temp_c = 70, .ohm = 7798 },
91 { .temp_c = 75, .ohm = 6544 },
92 { .temp_c = 80, .ohm = 5518 },
93 { .temp_c = 85, .ohm = 4674 },
94 { .temp_c = 90, .ohm = 3972 },
95 { .temp_c = 95, .ohm = 3388 },
96 { .temp_c = 100, .ohm = 2902 },
97 { .temp_c = 105, .ohm = 2494 },
98 { .temp_c = 110, .ohm = 2150 },
99 { .temp_c = 115, .ohm = 1860 },
100 { .temp_c = 120, .ohm = 1615 },
101 { .temp_c = 125, .ohm = 1406 },
102};
103static const struct ntc_compensation ncpXXwl333[] = {
104 { .temp_c = -40, .ohm = 1610154 },
105 { .temp_c = -35, .ohm = 1130850 },
106 { .temp_c = -30, .ohm = 802609 },
107 { .temp_c = -25, .ohm = 575385 },
108 { .temp_c = -20, .ohm = 416464 },
109 { .temp_c = -15, .ohm = 304219 },
110 { .temp_c = -10, .ohm = 224193 },
111 { .temp_c = -5, .ohm = 166623 },
112 { .temp_c = 0, .ohm = 124850 },
113 { .temp_c = 5, .ohm = 94287 },
114 { .temp_c = 10, .ohm = 71747 },
115 { .temp_c = 15, .ohm = 54996 },
116 { .temp_c = 20, .ohm = 42455 },
117 { .temp_c = 25, .ohm = 33000 },
118 { .temp_c = 30, .ohm = 25822 },
119 { .temp_c = 35, .ohm = 20335 },
120 { .temp_c = 40, .ohm = 16115 },
121 { .temp_c = 45, .ohm = 12849 },
122 { .temp_c = 50, .ohm = 10306 },
123 { .temp_c = 55, .ohm = 8314 },
124 { .temp_c = 60, .ohm = 6746 },
125 { .temp_c = 65, .ohm = 5503 },
126 { .temp_c = 70, .ohm = 4513 },
127 { .temp_c = 75, .ohm = 3721 },
128 { .temp_c = 80, .ohm = 3084 },
129 { .temp_c = 85, .ohm = 2569 },
130 { .temp_c = 90, .ohm = 2151 },
131 { .temp_c = 95, .ohm = 1809 },
132 { .temp_c = 100, .ohm = 1529 },
133 { .temp_c = 105, .ohm = 1299 },
134 { .temp_c = 110, .ohm = 1108 },
135 { .temp_c = 115, .ohm = 949 },
136 { .temp_c = 120, .ohm = 817 },
137 { .temp_c = 125, .ohm = 707 },
138};
139
140static const struct ntc_compensation ncpXXwf104[] = {
141 { .temp_c = -40, .ohm = 4397119 },
142 { .temp_c = -35, .ohm = 3088599 },
143 { .temp_c = -30, .ohm = 2197225 },
144 { .temp_c = -25, .ohm = 1581881 },
145 { .temp_c = -20, .ohm = 1151037 },
146 { .temp_c = -15, .ohm = 846579 },
147 { .temp_c = -10, .ohm = 628988 },
148 { .temp_c = -5, .ohm = 471632 },
149 { .temp_c = 0, .ohm = 357012 },
150 { .temp_c = 5, .ohm = 272500 },
151 { .temp_c = 10, .ohm = 209710 },
152 { .temp_c = 15, .ohm = 162651 },
153 { .temp_c = 20, .ohm = 127080 },
154 { .temp_c = 25, .ohm = 100000 },
155 { .temp_c = 30, .ohm = 79222 },
156 { .temp_c = 35, .ohm = 63167 },
157 { .temp_c = 40, .ohm = 50677 },
158 { .temp_c = 45, .ohm = 40904 },
159 { .temp_c = 50, .ohm = 33195 },
160 { .temp_c = 55, .ohm = 27091 },
161 { .temp_c = 60, .ohm = 22224 },
162 { .temp_c = 65, .ohm = 18323 },
163 { .temp_c = 70, .ohm = 15184 },
164 { .temp_c = 75, .ohm = 12635 },
165 { .temp_c = 80, .ohm = 10566 },
166 { .temp_c = 85, .ohm = 8873 },
167 { .temp_c = 90, .ohm = 7481 },
168 { .temp_c = 95, .ohm = 6337 },
169 { .temp_c = 100, .ohm = 5384 },
170 { .temp_c = 105, .ohm = 4594 },
171 { .temp_c = 110, .ohm = 3934 },
172 { .temp_c = 115, .ohm = 3380 },
173 { .temp_c = 120, .ohm = 2916 },
174 { .temp_c = 125, .ohm = 2522 },
175};
176
177static const struct ntc_compensation ncpXXxh103[] = {
178 { .temp_c = -40, .ohm = 247565 },
179 { .temp_c = -35, .ohm = 181742 },
180 { .temp_c = -30, .ohm = 135128 },
181 { .temp_c = -25, .ohm = 101678 },
182 { .temp_c = -20, .ohm = 77373 },
183 { .temp_c = -15, .ohm = 59504 },
184 { .temp_c = -10, .ohm = 46222 },
185 { .temp_c = -5, .ohm = 36244 },
186 { .temp_c = 0, .ohm = 28674 },
187 { .temp_c = 5, .ohm = 22878 },
188 { .temp_c = 10, .ohm = 18399 },
189 { .temp_c = 15, .ohm = 14910 },
190 { .temp_c = 20, .ohm = 12169 },
191 { .temp_c = 25, .ohm = 10000 },
192 { .temp_c = 30, .ohm = 8271 },
193 { .temp_c = 35, .ohm = 6883 },
194 { .temp_c = 40, .ohm = 5762 },
195 { .temp_c = 45, .ohm = 4851 },
196 { .temp_c = 50, .ohm = 4105 },
197 { .temp_c = 55, .ohm = 3492 },
198 { .temp_c = 60, .ohm = 2985 },
199 { .temp_c = 65, .ohm = 2563 },
200 { .temp_c = 70, .ohm = 2211 },
201 { .temp_c = 75, .ohm = 1915 },
202 { .temp_c = 80, .ohm = 1666 },
203 { .temp_c = 85, .ohm = 1454 },
204 { .temp_c = 90, .ohm = 1275 },
205 { .temp_c = 95, .ohm = 1121 },
206 { .temp_c = 100, .ohm = 990 },
207 { .temp_c = 105, .ohm = 876 },
208 { .temp_c = 110, .ohm = 779 },
209 { .temp_c = 115, .ohm = 694 },
210 { .temp_c = 120, .ohm = 620 },
211 { .temp_c = 125, .ohm = 556 },
212};
213
214/*
215 * The following compensation table is from the specification of EPCOS NTC
216 * Thermistors Datasheet
217 */
218static const struct ntc_compensation b57330v2103[] = {
219 { .temp_c = -40, .ohm = 190030 },
220 { .temp_c = -35, .ohm = 145360 },
221 { .temp_c = -30, .ohm = 112060 },
222 { .temp_c = -25, .ohm = 87041 },
223 { .temp_c = -20, .ohm = 68104 },
224 { .temp_c = -15, .ohm = 53665 },
225 { .temp_c = -10, .ohm = 42576 },
226 { .temp_c = -5, .ohm = 34001 },
227 { .temp_c = 0, .ohm = 27326 },
228 { .temp_c = 5, .ohm = 22096 },
229 { .temp_c = 10, .ohm = 17973 },
230 { .temp_c = 15, .ohm = 14703 },
231 { .temp_c = 20, .ohm = 12090 },
232 { .temp_c = 25, .ohm = 10000 },
233 { .temp_c = 30, .ohm = 8311 },
234 { .temp_c = 35, .ohm = 6941 },
235 { .temp_c = 40, .ohm = 5825 },
236 { .temp_c = 45, .ohm = 4911 },
237 { .temp_c = 50, .ohm = 4158 },
238 { .temp_c = 55, .ohm = 3536 },
239 { .temp_c = 60, .ohm = 3019 },
240 { .temp_c = 65, .ohm = 2588 },
241 { .temp_c = 70, .ohm = 2227 },
242 { .temp_c = 75, .ohm = 1924 },
243 { .temp_c = 80, .ohm = 1668 },
244 { .temp_c = 85, .ohm = 1451 },
245 { .temp_c = 90, .ohm = 1266 },
246 { .temp_c = 95, .ohm = 1108 },
247 { .temp_c = 100, .ohm = 973 },
248 { .temp_c = 105, .ohm = 857 },
249 { .temp_c = 110, .ohm = 757 },
250 { .temp_c = 115, .ohm = 671 },
251 { .temp_c = 120, .ohm = 596 },
252 { .temp_c = 125, .ohm = 531 },
253};
254
255struct ntc_data {
256 struct ntc_thermistor_platform_data *pdata;
257 const struct ntc_compensation *comp;
258 int n_comp;
259};
260
261#if defined(CONFIG_OF) && IS_ENABLED(CONFIG_IIO)
262static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
263{
264 struct iio_channel *channel = pdata->chan;
265 int raw, uv, ret;
266
267 ret = iio_read_channel_raw(channel, &raw);
268 if (ret < 0) {
269 pr_err("read channel() error: %d\n", ret);
270 return ret;
271 }
272
273 ret = iio_convert_raw_to_processed(channel, raw, &uv, 1000);
274 if (ret < 0) {
275 /* Assume 12 bit ADC with vref at pullup_uv */
276 uv = (pdata->pullup_uv * (s64)raw) >> 12;
277 }
278
279 return uv;
280}
281
282static const struct of_device_id ntc_match[] = {
283 { .compatible = "murata,ncp15wb473",
284 .data = &ntc_thermistor_id[0] },
285 { .compatible = "murata,ncp18wb473",
286 .data = &ntc_thermistor_id[1] },
287 { .compatible = "murata,ncp21wb473",
288 .data = &ntc_thermistor_id[2] },
289 { .compatible = "murata,ncp03wb473",
290 .data = &ntc_thermistor_id[3] },
291 { .compatible = "murata,ncp15wl333",
292 .data = &ntc_thermistor_id[4] },
293 { .compatible = "epcos,b57330v2103",
294 .data = &ntc_thermistor_id[5]},
295 { .compatible = "murata,ncp03wf104",
296 .data = &ntc_thermistor_id[6] },
297 { .compatible = "murata,ncp15xh103",
298 .data = &ntc_thermistor_id[7] },
299
300 /* Usage of vendor name "ntc" is deprecated */
301 { .compatible = "ntc,ncp15wb473",
302 .data = &ntc_thermistor_id[0] },
303 { .compatible = "ntc,ncp18wb473",
304 .data = &ntc_thermistor_id[1] },
305 { .compatible = "ntc,ncp21wb473",
306 .data = &ntc_thermistor_id[2] },
307 { .compatible = "ntc,ncp03wb473",
308 .data = &ntc_thermistor_id[3] },
309 { .compatible = "ntc,ncp15wl333",
310 .data = &ntc_thermistor_id[4] },
311 { },
312};
313MODULE_DEVICE_TABLE(of, ntc_match);
314
315static struct ntc_thermistor_platform_data *
316ntc_thermistor_parse_dt(struct device *dev)
317{
318 struct iio_channel *chan;
319 enum iio_chan_type type;
320 struct device_node *np = dev->of_node;
321 struct ntc_thermistor_platform_data *pdata;
322 int ret;
323
324 if (!np)
325 return NULL;
326
327 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
328 if (!pdata)
329 return ERR_PTR(-ENOMEM);
330
331 chan = devm_iio_channel_get(dev, NULL);
332 if (IS_ERR(chan))
333 return ERR_CAST(chan);
334
335 ret = iio_get_channel_type(chan, &type);
336 if (ret < 0)
337 return ERR_PTR(ret);
338
339 if (type != IIO_VOLTAGE)
340 return ERR_PTR(-EINVAL);
341
342 if (of_property_read_u32(np, "pullup-uv", &pdata->pullup_uv))
343 return ERR_PTR(-ENODEV);
344 if (of_property_read_u32(np, "pullup-ohm", &pdata->pullup_ohm))
345 return ERR_PTR(-ENODEV);
346 if (of_property_read_u32(np, "pulldown-ohm", &pdata->pulldown_ohm))
347 return ERR_PTR(-ENODEV);
348
349 if (of_find_property(np, "connected-positive", NULL))
350 pdata->connect = NTC_CONNECTED_POSITIVE;
351 else /* status change should be possible if not always on. */
352 pdata->connect = NTC_CONNECTED_GROUND;
353
354 pdata->chan = chan;
355 pdata->read_uv = ntc_adc_iio_read;
356
357 return pdata;
358}
359#else
360static struct ntc_thermistor_platform_data *
361ntc_thermistor_parse_dt(struct device *dev)
362{
363 return NULL;
364}
365
366#define ntc_match NULL
367
368#endif
369
370static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
371{
372 if (divisor == 0 && dividend == 0)
373 return 0;
374 if (divisor == 0)
375 return UINT_MAX;
376 return div64_u64(dividend, divisor);
377}
378
379static int get_ohm_of_thermistor(struct ntc_data *data, unsigned int uv)
380{
381 struct ntc_thermistor_platform_data *pdata = data->pdata;
382 u32 puv = pdata->pullup_uv;
383 u64 n, puo, pdo;
384 puo = pdata->pullup_ohm;
385 pdo = pdata->pulldown_ohm;
386
387 if (uv == 0)
388 return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
389 INT_MAX : 0;
390 if (uv >= puv)
391 return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
392 0 : INT_MAX;
393
394 if (pdata->connect == NTC_CONNECTED_POSITIVE && puo == 0)
395 n = div_u64(pdo * (puv - uv), uv);
396 else if (pdata->connect == NTC_CONNECTED_GROUND && pdo == 0)
397 n = div_u64(puo * uv, puv - uv);
398 else if (pdata->connect == NTC_CONNECTED_POSITIVE)
399 n = div64_u64_safe(pdo * puo * (puv - uv),
400 puo * uv - pdo * (puv - uv));
401 else
402 n = div64_u64_safe(pdo * puo * uv, pdo * (puv - uv) - puo * uv);
403
404 if (n > INT_MAX)
405 n = INT_MAX;
406 return n;
407}
408
409static void lookup_comp(struct ntc_data *data, unsigned int ohm,
410 int *i_low, int *i_high)
411{
412 int start, end, mid;
413
414 /*
415 * Handle special cases: Resistance is higher than or equal to
416 * resistance in first table entry, or resistance is lower or equal
417 * to resistance in last table entry.
418 * In these cases, return i_low == i_high, either pointing to the
419 * beginning or to the end of the table depending on the condition.
420 */
421 if (ohm >= data->comp[0].ohm) {
422 *i_low = 0;
423 *i_high = 0;
424 return;
425 }
426 if (ohm <= data->comp[data->n_comp - 1].ohm) {
427 *i_low = data->n_comp - 1;
428 *i_high = data->n_comp - 1;
429 return;
430 }
431
432 /* Do a binary search on compensation table */
433 start = 0;
434 end = data->n_comp;
435 while (start < end) {
436 mid = start + (end - start) / 2;
437 /*
438 * start <= mid < end
439 * data->comp[start].ohm > ohm >= data->comp[end].ohm
440 *
441 * We could check for "ohm == data->comp[mid].ohm" here, but
442 * that is a quite unlikely condition, and we would have to
443 * check again after updating start. Check it at the end instead
444 * for simplicity.
445 */
446 if (ohm >= data->comp[mid].ohm) {
447 end = mid;
448 } else {
449 start = mid + 1;
450 /*
451 * ohm >= data->comp[start].ohm might be true here,
452 * since we set start to mid + 1. In that case, we are
453 * done. We could keep going, but the condition is quite
454 * likely to occur, so it is worth checking for it.
455 */
456 if (ohm >= data->comp[start].ohm)
457 end = start;
458 }
459 /*
460 * start <= end
461 * data->comp[start].ohm >= ohm >= data->comp[end].ohm
462 */
463 }
464 /*
465 * start == end
466 * ohm >= data->comp[end].ohm
467 */
468 *i_low = end;
469 if (ohm == data->comp[end].ohm)
470 *i_high = end;
471 else
472 *i_high = end - 1;
473}
474
475static int get_temp_mc(struct ntc_data *data, unsigned int ohm)
476{
477 int low, high;
478 int temp;
479
480 lookup_comp(data, ohm, &low, &high);
481 if (low == high) {
482 /* Unable to use linear approximation */
483 temp = data->comp[low].temp_c * 1000;
484 } else {
485 temp = data->comp[low].temp_c * 1000 +
486 ((data->comp[high].temp_c - data->comp[low].temp_c) *
487 1000 * ((int)ohm - (int)data->comp[low].ohm)) /
488 ((int)data->comp[high].ohm - (int)data->comp[low].ohm);
489 }
490 return temp;
491}
492
493static int ntc_thermistor_get_ohm(struct ntc_data *data)
494{
495 int read_uv;
496
497 if (data->pdata->read_ohm)
498 return data->pdata->read_ohm();
499
500 if (data->pdata->read_uv) {
501 read_uv = data->pdata->read_uv(data->pdata);
502 if (read_uv < 0)
503 return read_uv;
504 return get_ohm_of_thermistor(data, read_uv);
505 }
506 return -EINVAL;
507}
508
509static int ntc_read_temp(void *data, int *temp)
510{
511 int ohm;
512
513 ohm = ntc_thermistor_get_ohm(data);
514 if (ohm < 0)
515 return ohm;
516
517 *temp = get_temp_mc(data, ohm);
518
519 return 0;
520}
521
522static ssize_t ntc_show_type(struct device *dev,
523 struct device_attribute *attr, char *buf)
524{
525 return sprintf(buf, "4\n");
526}
527
528static ssize_t ntc_show_temp(struct device *dev,
529 struct device_attribute *attr, char *buf)
530{
531 struct ntc_data *data = dev_get_drvdata(dev);
532 int ohm;
533
534 ohm = ntc_thermistor_get_ohm(data);
535 if (ohm < 0)
536 return ohm;
537
538 return sprintf(buf, "%d\n", get_temp_mc(data, ohm));
539}
540
541static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, ntc_show_type, NULL, 0);
542static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ntc_show_temp, NULL, 0);
543
544static struct attribute *ntc_attrs[] = {
545 &sensor_dev_attr_temp1_type.dev_attr.attr,
546 &sensor_dev_attr_temp1_input.dev_attr.attr,
547 NULL,
548};
549ATTRIBUTE_GROUPS(ntc);
550
551static const struct thermal_zone_of_device_ops ntc_of_thermal_ops = {
552 .get_temp = ntc_read_temp,
553};
554
555static int ntc_thermistor_probe(struct platform_device *pdev)
556{
557 struct thermal_zone_device *tz;
558 struct device *dev = &pdev->dev;
559 const struct of_device_id *of_id =
560 of_match_device(of_match_ptr(ntc_match), dev);
561 const struct platform_device_id *pdev_id;
562 struct ntc_thermistor_platform_data *pdata;
563 struct device *hwmon_dev;
564 struct ntc_data *data;
565
566 pdata = ntc_thermistor_parse_dt(dev);
567 if (IS_ERR(pdata))
568 return PTR_ERR(pdata);
569 else if (pdata == NULL)
570 pdata = dev_get_platdata(dev);
571
572 if (!pdata) {
573 dev_err(dev, "No platform init data supplied.\n");
574 return -ENODEV;
575 }
576
577 /* Either one of the two is required. */
578 if (!pdata->read_uv && !pdata->read_ohm) {
579 dev_err(dev,
580 "Both read_uv and read_ohm missing. Need either one of the two.\n");
581 return -EINVAL;
582 }
583
584 if (pdata->read_uv && pdata->read_ohm) {
585 dev_warn(dev,
586 "Only one of read_uv and read_ohm is needed; ignoring read_uv.\n");
587 pdata->read_uv = NULL;
588 }
589
590 if (pdata->read_uv && (pdata->pullup_uv == 0 ||
591 (pdata->pullup_ohm == 0 && pdata->connect ==
592 NTC_CONNECTED_GROUND) ||
593 (pdata->pulldown_ohm == 0 && pdata->connect ==
594 NTC_CONNECTED_POSITIVE) ||
595 (pdata->connect != NTC_CONNECTED_POSITIVE &&
596 pdata->connect != NTC_CONNECTED_GROUND))) {
597 dev_err(dev, "Required data to use read_uv not supplied.\n");
598 return -EINVAL;
599 }
600
601 data = devm_kzalloc(dev, sizeof(struct ntc_data), GFP_KERNEL);
602 if (!data)
603 return -ENOMEM;
604
605 pdev_id = of_id ? of_id->data : platform_get_device_id(pdev);
606
607 data->pdata = pdata;
608
609 switch (pdev_id->driver_data) {
610 case TYPE_NCPXXWB473:
611 data->comp = ncpXXwb473;
612 data->n_comp = ARRAY_SIZE(ncpXXwb473);
613 break;
614 case TYPE_NCPXXWL333:
615 data->comp = ncpXXwl333;
616 data->n_comp = ARRAY_SIZE(ncpXXwl333);
617 break;
618 case TYPE_B57330V2103:
619 data->comp = b57330v2103;
620 data->n_comp = ARRAY_SIZE(b57330v2103);
621 break;
622 case TYPE_NCPXXWF104:
623 data->comp = ncpXXwf104;
624 data->n_comp = ARRAY_SIZE(ncpXXwf104);
625 break;
626 case TYPE_NCPXXXH103:
627 data->comp = ncpXXxh103;
628 data->n_comp = ARRAY_SIZE(ncpXXxh103);
629 break;
630 default:
631 dev_err(dev, "Unknown device type: %lu(%s)\n",
632 pdev_id->driver_data, pdev_id->name);
633 return -EINVAL;
634 }
635
636 hwmon_dev = devm_hwmon_device_register_with_groups(dev, pdev_id->name,
637 data, ntc_groups);
638 if (IS_ERR(hwmon_dev)) {
639 dev_err(dev, "unable to register as hwmon device.\n");
640 return PTR_ERR(hwmon_dev);
641 }
642
643 dev_info(dev, "Thermistor type: %s successfully probed.\n",
644 pdev_id->name);
645
646 tz = devm_thermal_zone_of_sensor_register(dev, 0, data,
647 &ntc_of_thermal_ops);
648 if (IS_ERR(tz))
649 dev_dbg(dev, "Failed to register to thermal fw.\n");
650
651 return 0;
652}
653
654static struct platform_driver ntc_thermistor_driver = {
655 .driver = {
656 .name = "ntc-thermistor",
657 .of_match_table = of_match_ptr(ntc_match),
658 },
659 .probe = ntc_thermistor_probe,
660 .id_table = ntc_thermistor_id,
661};
662
663module_platform_driver(ntc_thermistor_driver);
664
665MODULE_DESCRIPTION("NTC Thermistor Driver");
666MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
667MODULE_LICENSE("GPL");
668MODULE_ALIAS("platform:ntc-thermistor");
1/*
2 * ntc_thermistor.c - NTC Thermistors
3 *
4 * Copyright (C) 2010 Samsung Electronics
5 * MyungJoo Ham <myungjoo.ham@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 *
21 */
22
23#include <linux/slab.h>
24#include <linux/module.h>
25#include <linux/pm_runtime.h>
26#include <linux/math64.h>
27#include <linux/platform_device.h>
28#include <linux/err.h>
29
30#include <linux/platform_data/ntc_thermistor.h>
31
32#include <linux/hwmon.h>
33#include <linux/hwmon-sysfs.h>
34
35struct ntc_compensation {
36 int temp_C;
37 unsigned int ohm;
38};
39
40/*
41 * A compensation table should be sorted by the values of .ohm
42 * in descending order.
43 * The following compensation tables are from the specification of Murata NTC
44 * Thermistors Datasheet
45 */
46const struct ntc_compensation ncpXXwb473[] = {
47 { .temp_C = -40, .ohm = 1747920 },
48 { .temp_C = -35, .ohm = 1245428 },
49 { .temp_C = -30, .ohm = 898485 },
50 { .temp_C = -25, .ohm = 655802 },
51 { .temp_C = -20, .ohm = 483954 },
52 { .temp_C = -15, .ohm = 360850 },
53 { .temp_C = -10, .ohm = 271697 },
54 { .temp_C = -5, .ohm = 206463 },
55 { .temp_C = 0, .ohm = 158214 },
56 { .temp_C = 5, .ohm = 122259 },
57 { .temp_C = 10, .ohm = 95227 },
58 { .temp_C = 15, .ohm = 74730 },
59 { .temp_C = 20, .ohm = 59065 },
60 { .temp_C = 25, .ohm = 47000 },
61 { .temp_C = 30, .ohm = 37643 },
62 { .temp_C = 35, .ohm = 30334 },
63 { .temp_C = 40, .ohm = 24591 },
64 { .temp_C = 45, .ohm = 20048 },
65 { .temp_C = 50, .ohm = 16433 },
66 { .temp_C = 55, .ohm = 13539 },
67 { .temp_C = 60, .ohm = 11209 },
68 { .temp_C = 65, .ohm = 9328 },
69 { .temp_C = 70, .ohm = 7798 },
70 { .temp_C = 75, .ohm = 6544 },
71 { .temp_C = 80, .ohm = 5518 },
72 { .temp_C = 85, .ohm = 4674 },
73 { .temp_C = 90, .ohm = 3972 },
74 { .temp_C = 95, .ohm = 3388 },
75 { .temp_C = 100, .ohm = 2902 },
76 { .temp_C = 105, .ohm = 2494 },
77 { .temp_C = 110, .ohm = 2150 },
78 { .temp_C = 115, .ohm = 1860 },
79 { .temp_C = 120, .ohm = 1615 },
80 { .temp_C = 125, .ohm = 1406 },
81};
82const struct ntc_compensation ncpXXwl333[] = {
83 { .temp_C = -40, .ohm = 1610154 },
84 { .temp_C = -35, .ohm = 1130850 },
85 { .temp_C = -30, .ohm = 802609 },
86 { .temp_C = -25, .ohm = 575385 },
87 { .temp_C = -20, .ohm = 416464 },
88 { .temp_C = -15, .ohm = 304219 },
89 { .temp_C = -10, .ohm = 224193 },
90 { .temp_C = -5, .ohm = 166623 },
91 { .temp_C = 0, .ohm = 124850 },
92 { .temp_C = 5, .ohm = 94287 },
93 { .temp_C = 10, .ohm = 71747 },
94 { .temp_C = 15, .ohm = 54996 },
95 { .temp_C = 20, .ohm = 42455 },
96 { .temp_C = 25, .ohm = 33000 },
97 { .temp_C = 30, .ohm = 25822 },
98 { .temp_C = 35, .ohm = 20335 },
99 { .temp_C = 40, .ohm = 16115 },
100 { .temp_C = 45, .ohm = 12849 },
101 { .temp_C = 50, .ohm = 10306 },
102 { .temp_C = 55, .ohm = 8314 },
103 { .temp_C = 60, .ohm = 6746 },
104 { .temp_C = 65, .ohm = 5503 },
105 { .temp_C = 70, .ohm = 4513 },
106 { .temp_C = 75, .ohm = 3721 },
107 { .temp_C = 80, .ohm = 3084 },
108 { .temp_C = 85, .ohm = 2569 },
109 { .temp_C = 90, .ohm = 2151 },
110 { .temp_C = 95, .ohm = 1809 },
111 { .temp_C = 100, .ohm = 1529 },
112 { .temp_C = 105, .ohm = 1299 },
113 { .temp_C = 110, .ohm = 1108 },
114 { .temp_C = 115, .ohm = 949 },
115 { .temp_C = 120, .ohm = 817 },
116 { .temp_C = 125, .ohm = 707 },
117};
118
119struct ntc_data {
120 struct device *hwmon_dev;
121 struct ntc_thermistor_platform_data *pdata;
122 const struct ntc_compensation *comp;
123 struct device *dev;
124 int n_comp;
125 char name[PLATFORM_NAME_SIZE];
126};
127
128static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
129{
130 if (divisor == 0 && dividend == 0)
131 return 0;
132 if (divisor == 0)
133 return UINT_MAX;
134 return div64_u64(dividend, divisor);
135}
136
137static int get_ohm_of_thermistor(struct ntc_data *data, unsigned int uV)
138{
139 struct ntc_thermistor_platform_data *pdata = data->pdata;
140 u64 mV = uV / 1000;
141 u64 pmV = pdata->pullup_uV / 1000;
142 u64 N, puO, pdO;
143 puO = pdata->pullup_ohm;
144 pdO = pdata->pulldown_ohm;
145
146 if (mV == 0) {
147 if (pdata->connect == NTC_CONNECTED_POSITIVE)
148 return INT_MAX;
149 return 0;
150 }
151 if (mV >= pmV)
152 return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
153 0 : INT_MAX;
154
155 if (pdata->connect == NTC_CONNECTED_POSITIVE && puO == 0)
156 N = div64_u64_safe(pdO * (pmV - mV), mV);
157 else if (pdata->connect == NTC_CONNECTED_GROUND && pdO == 0)
158 N = div64_u64_safe(puO * mV, pmV - mV);
159 else if (pdata->connect == NTC_CONNECTED_POSITIVE)
160 N = div64_u64_safe(pdO * puO * (pmV - mV),
161 puO * mV - pdO * (pmV - mV));
162 else
163 N = div64_u64_safe(pdO * puO * mV, pdO * (pmV - mV) - puO * mV);
164
165 if (N > INT_MAX)
166 N = INT_MAX;
167 return N;
168}
169
170static void lookup_comp(struct ntc_data *data, unsigned int ohm,
171 int *i_low, int *i_high)
172{
173 int start, end, mid;
174
175 /*
176 * Handle special cases: Resistance is higher than or equal to
177 * resistance in first table entry, or resistance is lower or equal
178 * to resistance in last table entry.
179 * In these cases, return i_low == i_high, either pointing to the
180 * beginning or to the end of the table depending on the condition.
181 */
182 if (ohm >= data->comp[0].ohm) {
183 *i_low = 0;
184 *i_high = 0;
185 return;
186 }
187 if (ohm <= data->comp[data->n_comp - 1].ohm) {
188 *i_low = data->n_comp - 1;
189 *i_high = data->n_comp - 1;
190 return;
191 }
192
193 /* Do a binary search on compensation table */
194 start = 0;
195 end = data->n_comp;
196 while (start < end) {
197 mid = start + (end - start) / 2;
198 /*
199 * start <= mid < end
200 * data->comp[start].ohm > ohm >= data->comp[end].ohm
201 *
202 * We could check for "ohm == data->comp[mid].ohm" here, but
203 * that is a quite unlikely condition, and we would have to
204 * check again after updating start. Check it at the end instead
205 * for simplicity.
206 */
207 if (ohm >= data->comp[mid].ohm) {
208 end = mid;
209 } else {
210 start = mid + 1;
211 /*
212 * ohm >= data->comp[start].ohm might be true here,
213 * since we set start to mid + 1. In that case, we are
214 * done. We could keep going, but the condition is quite
215 * likely to occur, so it is worth checking for it.
216 */
217 if (ohm >= data->comp[start].ohm)
218 end = start;
219 }
220 /*
221 * start <= end
222 * data->comp[start].ohm >= ohm >= data->comp[end].ohm
223 */
224 }
225 /*
226 * start == end
227 * ohm >= data->comp[end].ohm
228 */
229 *i_low = end;
230 if (ohm == data->comp[end].ohm)
231 *i_high = end;
232 else
233 *i_high = end - 1;
234}
235
236static int get_temp_mC(struct ntc_data *data, unsigned int ohm)
237{
238 int low, high;
239 int temp;
240
241 lookup_comp(data, ohm, &low, &high);
242 if (low == high) {
243 /* Unable to use linear approximation */
244 temp = data->comp[low].temp_C * 1000;
245 } else {
246 temp = data->comp[low].temp_C * 1000 +
247 ((data->comp[high].temp_C - data->comp[low].temp_C) *
248 1000 * ((int)ohm - (int)data->comp[low].ohm)) /
249 ((int)data->comp[high].ohm - (int)data->comp[low].ohm);
250 }
251 return temp;
252}
253
254static int ntc_thermistor_get_ohm(struct ntc_data *data)
255{
256 int read_uV;
257
258 if (data->pdata->read_ohm)
259 return data->pdata->read_ohm();
260
261 if (data->pdata->read_uV) {
262 read_uV = data->pdata->read_uV();
263 if (read_uV < 0)
264 return read_uV;
265 return get_ohm_of_thermistor(data, read_uV);
266 }
267 return -EINVAL;
268}
269
270static ssize_t ntc_show_name(struct device *dev,
271 struct device_attribute *attr, char *buf)
272{
273 struct ntc_data *data = dev_get_drvdata(dev);
274
275 return sprintf(buf, "%s\n", data->name);
276}
277
278static ssize_t ntc_show_type(struct device *dev,
279 struct device_attribute *attr, char *buf)
280{
281 return sprintf(buf, "4\n");
282}
283
284static ssize_t ntc_show_temp(struct device *dev,
285 struct device_attribute *attr, char *buf)
286{
287 struct ntc_data *data = dev_get_drvdata(dev);
288 int ohm;
289
290 ohm = ntc_thermistor_get_ohm(data);
291 if (ohm < 0)
292 return ohm;
293
294 return sprintf(buf, "%d\n", get_temp_mC(data, ohm));
295}
296
297static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, ntc_show_type, NULL, 0);
298static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ntc_show_temp, NULL, 0);
299static DEVICE_ATTR(name, S_IRUGO, ntc_show_name, NULL);
300
301static struct attribute *ntc_attributes[] = {
302 &dev_attr_name.attr,
303 &sensor_dev_attr_temp1_type.dev_attr.attr,
304 &sensor_dev_attr_temp1_input.dev_attr.attr,
305 NULL,
306};
307
308static const struct attribute_group ntc_attr_group = {
309 .attrs = ntc_attributes,
310};
311
312static int __devinit ntc_thermistor_probe(struct platform_device *pdev)
313{
314 struct ntc_data *data;
315 struct ntc_thermistor_platform_data *pdata = pdev->dev.platform_data;
316 int ret = 0;
317
318 if (!pdata) {
319 dev_err(&pdev->dev, "No platform init data supplied.\n");
320 return -ENODEV;
321 }
322
323 /* Either one of the two is required. */
324 if (!pdata->read_uV && !pdata->read_ohm) {
325 dev_err(&pdev->dev,
326 "Both read_uV and read_ohm missing. Need either one of the two.\n");
327 return -EINVAL;
328 }
329
330 if (pdata->read_uV && pdata->read_ohm) {
331 dev_warn(&pdev->dev,
332 "Only one of read_uV and read_ohm is needed; ignoring read_uV.\n");
333 pdata->read_uV = NULL;
334 }
335
336 if (pdata->read_uV && (pdata->pullup_uV == 0 ||
337 (pdata->pullup_ohm == 0 && pdata->connect ==
338 NTC_CONNECTED_GROUND) ||
339 (pdata->pulldown_ohm == 0 && pdata->connect ==
340 NTC_CONNECTED_POSITIVE) ||
341 (pdata->connect != NTC_CONNECTED_POSITIVE &&
342 pdata->connect != NTC_CONNECTED_GROUND))) {
343 dev_err(&pdev->dev,
344 "Required data to use read_uV not supplied.\n");
345 return -EINVAL;
346 }
347
348 data = devm_kzalloc(&pdev->dev, sizeof(struct ntc_data), GFP_KERNEL);
349 if (!data)
350 return -ENOMEM;
351
352 data->dev = &pdev->dev;
353 data->pdata = pdata;
354 strncpy(data->name, pdev->id_entry->name, PLATFORM_NAME_SIZE);
355
356 switch (pdev->id_entry->driver_data) {
357 case TYPE_NCPXXWB473:
358 data->comp = ncpXXwb473;
359 data->n_comp = ARRAY_SIZE(ncpXXwb473);
360 break;
361 case TYPE_NCPXXWL333:
362 data->comp = ncpXXwl333;
363 data->n_comp = ARRAY_SIZE(ncpXXwl333);
364 break;
365 default:
366 dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
367 pdev->id_entry->driver_data,
368 pdev->id_entry->name);
369 return -EINVAL;
370 }
371
372 platform_set_drvdata(pdev, data);
373
374 ret = sysfs_create_group(&data->dev->kobj, &ntc_attr_group);
375 if (ret) {
376 dev_err(data->dev, "unable to create sysfs files\n");
377 return ret;
378 }
379
380 data->hwmon_dev = hwmon_device_register(data->dev);
381 if (IS_ERR(data->hwmon_dev)) {
382 dev_err(data->dev, "unable to register as hwmon device.\n");
383 ret = PTR_ERR(data->hwmon_dev);
384 goto err_after_sysfs;
385 }
386
387 dev_info(&pdev->dev, "Thermistor %s:%d (type: %s/%lu) successfully probed.\n",
388 pdev->name, pdev->id, pdev->id_entry->name,
389 pdev->id_entry->driver_data);
390 return 0;
391err_after_sysfs:
392 sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
393 return ret;
394}
395
396static int __devexit ntc_thermistor_remove(struct platform_device *pdev)
397{
398 struct ntc_data *data = platform_get_drvdata(pdev);
399
400 hwmon_device_unregister(data->hwmon_dev);
401 sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
402 platform_set_drvdata(pdev, NULL);
403
404 return 0;
405}
406
407static const struct platform_device_id ntc_thermistor_id[] = {
408 { "ncp15wb473", TYPE_NCPXXWB473 },
409 { "ncp18wb473", TYPE_NCPXXWB473 },
410 { "ncp21wb473", TYPE_NCPXXWB473 },
411 { "ncp03wb473", TYPE_NCPXXWB473 },
412 { "ncp15wl333", TYPE_NCPXXWL333 },
413 { },
414};
415
416static struct platform_driver ntc_thermistor_driver = {
417 .driver = {
418 .name = "ntc-thermistor",
419 .owner = THIS_MODULE,
420 },
421 .probe = ntc_thermistor_probe,
422 .remove = __devexit_p(ntc_thermistor_remove),
423 .id_table = ntc_thermistor_id,
424};
425
426module_platform_driver(ntc_thermistor_driver);
427
428MODULE_DESCRIPTION("NTC Thermistor Driver");
429MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
430MODULE_LICENSE("GPL");
431MODULE_ALIAS("platform:ntc-thermistor");