Loading...
1/*
2 * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
3 * Licensed under the GPL
4 */
5
6#include <linux/mm.h>
7#include <linux/sched.h>
8#include <linux/hardirq.h>
9#include <linux/module.h>
10#include <linux/uaccess.h>
11#include <asm/current.h>
12#include <asm/pgtable.h>
13#include <asm/tlbflush.h>
14#include <arch.h>
15#include <as-layout.h>
16#include <kern_util.h>
17#include <os.h>
18#include <skas.h>
19
20/*
21 * Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by
22 * segv().
23 */
24int handle_page_fault(unsigned long address, unsigned long ip,
25 int is_write, int is_user, int *code_out)
26{
27 struct mm_struct *mm = current->mm;
28 struct vm_area_struct *vma;
29 pgd_t *pgd;
30 pud_t *pud;
31 pmd_t *pmd;
32 pte_t *pte;
33 int err = -EFAULT;
34 unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
35
36 *code_out = SEGV_MAPERR;
37
38 /*
39 * If the fault was with pagefaults disabled, don't take the fault, just
40 * fail.
41 */
42 if (faulthandler_disabled())
43 goto out_nosemaphore;
44
45 if (is_user)
46 flags |= FAULT_FLAG_USER;
47retry:
48 down_read(&mm->mmap_sem);
49 vma = find_vma(mm, address);
50 if (!vma)
51 goto out;
52 else if (vma->vm_start <= address)
53 goto good_area;
54 else if (!(vma->vm_flags & VM_GROWSDOWN))
55 goto out;
56 else if (is_user && !ARCH_IS_STACKGROW(address))
57 goto out;
58 else if (expand_stack(vma, address))
59 goto out;
60
61good_area:
62 *code_out = SEGV_ACCERR;
63 if (is_write) {
64 if (!(vma->vm_flags & VM_WRITE))
65 goto out;
66 flags |= FAULT_FLAG_WRITE;
67 } else {
68 /* Don't require VM_READ|VM_EXEC for write faults! */
69 if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
70 goto out;
71 }
72
73 do {
74 int fault;
75
76 fault = handle_mm_fault(vma, address, flags);
77
78 if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
79 goto out_nosemaphore;
80
81 if (unlikely(fault & VM_FAULT_ERROR)) {
82 if (fault & VM_FAULT_OOM) {
83 goto out_of_memory;
84 } else if (fault & VM_FAULT_SIGSEGV) {
85 goto out;
86 } else if (fault & VM_FAULT_SIGBUS) {
87 err = -EACCES;
88 goto out;
89 }
90 BUG();
91 }
92 if (flags & FAULT_FLAG_ALLOW_RETRY) {
93 if (fault & VM_FAULT_MAJOR)
94 current->maj_flt++;
95 else
96 current->min_flt++;
97 if (fault & VM_FAULT_RETRY) {
98 flags &= ~FAULT_FLAG_ALLOW_RETRY;
99 flags |= FAULT_FLAG_TRIED;
100
101 goto retry;
102 }
103 }
104
105 pgd = pgd_offset(mm, address);
106 pud = pud_offset(pgd, address);
107 pmd = pmd_offset(pud, address);
108 pte = pte_offset_kernel(pmd, address);
109 } while (!pte_present(*pte));
110 err = 0;
111 /*
112 * The below warning was added in place of
113 * pte_mkyoung(); if (is_write) pte_mkdirty();
114 * If it's triggered, we'd see normally a hang here (a clean pte is
115 * marked read-only to emulate the dirty bit).
116 * However, the generic code can mark a PTE writable but clean on a
117 * concurrent read fault, triggering this harmlessly. So comment it out.
118 */
119#if 0
120 WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
121#endif
122 flush_tlb_page(vma, address);
123out:
124 up_read(&mm->mmap_sem);
125out_nosemaphore:
126 return err;
127
128out_of_memory:
129 /*
130 * We ran out of memory, call the OOM killer, and return the userspace
131 * (which will retry the fault, or kill us if we got oom-killed).
132 */
133 up_read(&mm->mmap_sem);
134 if (!is_user)
135 goto out_nosemaphore;
136 pagefault_out_of_memory();
137 return 0;
138}
139EXPORT_SYMBOL(handle_page_fault);
140
141static void show_segv_info(struct uml_pt_regs *regs)
142{
143 struct task_struct *tsk = current;
144 struct faultinfo *fi = UPT_FAULTINFO(regs);
145
146 if (!unhandled_signal(tsk, SIGSEGV))
147 return;
148
149 if (!printk_ratelimit())
150 return;
151
152 printk("%s%s[%d]: segfault at %lx ip %p sp %p error %x",
153 task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
154 tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
155 (void *)UPT_IP(regs), (void *)UPT_SP(regs),
156 fi->error_code);
157
158 print_vma_addr(KERN_CONT " in ", UPT_IP(regs));
159 printk(KERN_CONT "\n");
160}
161
162static void bad_segv(struct faultinfo fi, unsigned long ip)
163{
164 struct siginfo si;
165
166 si.si_signo = SIGSEGV;
167 si.si_code = SEGV_ACCERR;
168 si.si_addr = (void __user *) FAULT_ADDRESS(fi);
169 current->thread.arch.faultinfo = fi;
170 force_sig_info(SIGSEGV, &si, current);
171}
172
173void fatal_sigsegv(void)
174{
175 force_sigsegv(SIGSEGV, current);
176 do_signal(¤t->thread.regs);
177 /*
178 * This is to tell gcc that we're not returning - do_signal
179 * can, in general, return, but in this case, it's not, since
180 * we just got a fatal SIGSEGV queued.
181 */
182 os_dump_core();
183}
184
185void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
186{
187 struct faultinfo * fi = UPT_FAULTINFO(regs);
188
189 if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) {
190 show_segv_info(regs);
191 bad_segv(*fi, UPT_IP(regs));
192 return;
193 }
194 segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
195}
196
197/*
198 * We give a *copy* of the faultinfo in the regs to segv.
199 * This must be done, since nesting SEGVs could overwrite
200 * the info in the regs. A pointer to the info then would
201 * give us bad data!
202 */
203unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
204 struct uml_pt_regs *regs)
205{
206 struct siginfo si;
207 jmp_buf *catcher;
208 int err;
209 int is_write = FAULT_WRITE(fi);
210 unsigned long address = FAULT_ADDRESS(fi);
211
212 if (!is_user && regs)
213 current->thread.segv_regs = container_of(regs, struct pt_regs, regs);
214
215 if (!is_user && (address >= start_vm) && (address < end_vm)) {
216 flush_tlb_kernel_vm();
217 goto out;
218 }
219 else if (current->mm == NULL) {
220 show_regs(container_of(regs, struct pt_regs, regs));
221 panic("Segfault with no mm");
222 }
223 else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) {
224 show_regs(container_of(regs, struct pt_regs, regs));
225 panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx",
226 address, ip);
227 }
228
229 if (SEGV_IS_FIXABLE(&fi))
230 err = handle_page_fault(address, ip, is_write, is_user,
231 &si.si_code);
232 else {
233 err = -EFAULT;
234 /*
235 * A thread accessed NULL, we get a fault, but CR2 is invalid.
236 * This code is used in __do_copy_from_user() of TT mode.
237 * XXX tt mode is gone, so maybe this isn't needed any more
238 */
239 address = 0;
240 }
241
242 catcher = current->thread.fault_catcher;
243 if (!err)
244 goto out;
245 else if (catcher != NULL) {
246 current->thread.fault_addr = (void *) address;
247 UML_LONGJMP(catcher, 1);
248 }
249 else if (current->thread.fault_addr != NULL)
250 panic("fault_addr set but no fault catcher");
251 else if (!is_user && arch_fixup(ip, regs))
252 goto out;
253
254 if (!is_user) {
255 show_regs(container_of(regs, struct pt_regs, regs));
256 panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
257 address, ip);
258 }
259
260 show_segv_info(regs);
261
262 if (err == -EACCES) {
263 si.si_signo = SIGBUS;
264 si.si_errno = 0;
265 si.si_code = BUS_ADRERR;
266 si.si_addr = (void __user *)address;
267 current->thread.arch.faultinfo = fi;
268 force_sig_info(SIGBUS, &si, current);
269 } else {
270 BUG_ON(err != -EFAULT);
271 si.si_signo = SIGSEGV;
272 si.si_addr = (void __user *) address;
273 current->thread.arch.faultinfo = fi;
274 force_sig_info(SIGSEGV, &si, current);
275 }
276
277out:
278 if (regs)
279 current->thread.segv_regs = NULL;
280
281 return 0;
282}
283
284void relay_signal(int sig, struct siginfo *si, struct uml_pt_regs *regs)
285{
286 struct faultinfo *fi;
287 struct siginfo clean_si;
288
289 if (!UPT_IS_USER(regs)) {
290 if (sig == SIGBUS)
291 printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
292 "mount likely just ran out of space\n");
293 panic("Kernel mode signal %d", sig);
294 }
295
296 arch_examine_signal(sig, regs);
297
298 memset(&clean_si, 0, sizeof(clean_si));
299 clean_si.si_signo = si->si_signo;
300 clean_si.si_errno = si->si_errno;
301 clean_si.si_code = si->si_code;
302 switch (sig) {
303 case SIGILL:
304 case SIGFPE:
305 case SIGSEGV:
306 case SIGBUS:
307 case SIGTRAP:
308 fi = UPT_FAULTINFO(regs);
309 clean_si.si_addr = (void __user *) FAULT_ADDRESS(*fi);
310 current->thread.arch.faultinfo = *fi;
311#ifdef __ARCH_SI_TRAPNO
312 clean_si.si_trapno = si->si_trapno;
313#endif
314 break;
315 default:
316 printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d)\n",
317 sig, si->si_code);
318 }
319
320 force_sig_info(sig, &clean_si, current);
321}
322
323void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs)
324{
325 if (current->thread.fault_catcher != NULL)
326 UML_LONGJMP(current->thread.fault_catcher, 1);
327 else
328 relay_signal(sig, si, regs);
329}
330
331void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
332{
333 do_IRQ(WINCH_IRQ, regs);
334}
335
336void trap_init(void)
337{
338}
1/*
2 * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
3 * Licensed under the GPL
4 */
5
6#include <linux/mm.h>
7#include <linux/sched.h>
8#include <linux/hardirq.h>
9#include <asm/current.h>
10#include <asm/pgtable.h>
11#include <asm/tlbflush.h>
12#include "arch.h"
13#include "as-layout.h"
14#include "kern_util.h"
15#include "os.h"
16#include "skas.h"
17#include "sysdep/sigcontext.h"
18
19/*
20 * Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by
21 * segv().
22 */
23int handle_page_fault(unsigned long address, unsigned long ip,
24 int is_write, int is_user, int *code_out)
25{
26 struct mm_struct *mm = current->mm;
27 struct vm_area_struct *vma;
28 pgd_t *pgd;
29 pud_t *pud;
30 pmd_t *pmd;
31 pte_t *pte;
32 int err = -EFAULT;
33
34 *code_out = SEGV_MAPERR;
35
36 /*
37 * If the fault was during atomic operation, don't take the fault, just
38 * fail.
39 */
40 if (in_atomic())
41 goto out_nosemaphore;
42
43 down_read(&mm->mmap_sem);
44 vma = find_vma(mm, address);
45 if (!vma)
46 goto out;
47 else if (vma->vm_start <= address)
48 goto good_area;
49 else if (!(vma->vm_flags & VM_GROWSDOWN))
50 goto out;
51 else if (is_user && !ARCH_IS_STACKGROW(address))
52 goto out;
53 else if (expand_stack(vma, address))
54 goto out;
55
56good_area:
57 *code_out = SEGV_ACCERR;
58 if (is_write && !(vma->vm_flags & VM_WRITE))
59 goto out;
60
61 /* Don't require VM_READ|VM_EXEC for write faults! */
62 if (!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
63 goto out;
64
65 do {
66 int fault;
67
68 fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
69 if (unlikely(fault & VM_FAULT_ERROR)) {
70 if (fault & VM_FAULT_OOM) {
71 goto out_of_memory;
72 } else if (fault & VM_FAULT_SIGBUS) {
73 err = -EACCES;
74 goto out;
75 }
76 BUG();
77 }
78 if (fault & VM_FAULT_MAJOR)
79 current->maj_flt++;
80 else
81 current->min_flt++;
82
83 pgd = pgd_offset(mm, address);
84 pud = pud_offset(pgd, address);
85 pmd = pmd_offset(pud, address);
86 pte = pte_offset_kernel(pmd, address);
87 } while (!pte_present(*pte));
88 err = 0;
89 /*
90 * The below warning was added in place of
91 * pte_mkyoung(); if (is_write) pte_mkdirty();
92 * If it's triggered, we'd see normally a hang here (a clean pte is
93 * marked read-only to emulate the dirty bit).
94 * However, the generic code can mark a PTE writable but clean on a
95 * concurrent read fault, triggering this harmlessly. So comment it out.
96 */
97#if 0
98 WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
99#endif
100 flush_tlb_page(vma, address);
101out:
102 up_read(&mm->mmap_sem);
103out_nosemaphore:
104 return err;
105
106out_of_memory:
107 /*
108 * We ran out of memory, call the OOM killer, and return the userspace
109 * (which will retry the fault, or kill us if we got oom-killed).
110 */
111 up_read(&mm->mmap_sem);
112 pagefault_out_of_memory();
113 return 0;
114}
115
116static void show_segv_info(struct uml_pt_regs *regs)
117{
118 struct task_struct *tsk = current;
119 struct faultinfo *fi = UPT_FAULTINFO(regs);
120
121 if (!unhandled_signal(tsk, SIGSEGV))
122 return;
123
124 if (!printk_ratelimit())
125 return;
126
127 printk("%s%s[%d]: segfault at %lx ip %p sp %p error %x",
128 task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
129 tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
130 (void *)UPT_IP(regs), (void *)UPT_SP(regs),
131 fi->error_code);
132
133 print_vma_addr(KERN_CONT " in ", UPT_IP(regs));
134 printk(KERN_CONT "\n");
135}
136
137static void bad_segv(struct faultinfo fi, unsigned long ip)
138{
139 struct siginfo si;
140
141 si.si_signo = SIGSEGV;
142 si.si_code = SEGV_ACCERR;
143 si.si_addr = (void __user *) FAULT_ADDRESS(fi);
144 current->thread.arch.faultinfo = fi;
145 force_sig_info(SIGSEGV, &si, current);
146}
147
148void fatal_sigsegv(void)
149{
150 force_sigsegv(SIGSEGV, current);
151 do_signal();
152 /*
153 * This is to tell gcc that we're not returning - do_signal
154 * can, in general, return, but in this case, it's not, since
155 * we just got a fatal SIGSEGV queued.
156 */
157 os_dump_core();
158}
159
160void segv_handler(int sig, struct uml_pt_regs *regs)
161{
162 struct faultinfo * fi = UPT_FAULTINFO(regs);
163
164 if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) {
165 show_segv_info(regs);
166 bad_segv(*fi, UPT_IP(regs));
167 return;
168 }
169 segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
170}
171
172/*
173 * We give a *copy* of the faultinfo in the regs to segv.
174 * This must be done, since nesting SEGVs could overwrite
175 * the info in the regs. A pointer to the info then would
176 * give us bad data!
177 */
178unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
179 struct uml_pt_regs *regs)
180{
181 struct siginfo si;
182 jmp_buf *catcher;
183 int err;
184 int is_write = FAULT_WRITE(fi);
185 unsigned long address = FAULT_ADDRESS(fi);
186
187 if (!is_user && (address >= start_vm) && (address < end_vm)) {
188 flush_tlb_kernel_vm();
189 return 0;
190 }
191 else if (current->mm == NULL) {
192 show_regs(container_of(regs, struct pt_regs, regs));
193 panic("Segfault with no mm");
194 }
195
196 if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
197 err = handle_page_fault(address, ip, is_write, is_user,
198 &si.si_code);
199 else {
200 err = -EFAULT;
201 /*
202 * A thread accessed NULL, we get a fault, but CR2 is invalid.
203 * This code is used in __do_copy_from_user() of TT mode.
204 * XXX tt mode is gone, so maybe this isn't needed any more
205 */
206 address = 0;
207 }
208
209 catcher = current->thread.fault_catcher;
210 if (!err)
211 return 0;
212 else if (catcher != NULL) {
213 current->thread.fault_addr = (void *) address;
214 UML_LONGJMP(catcher, 1);
215 }
216 else if (current->thread.fault_addr != NULL)
217 panic("fault_addr set but no fault catcher");
218 else if (!is_user && arch_fixup(ip, regs))
219 return 0;
220
221 if (!is_user) {
222 show_regs(container_of(regs, struct pt_regs, regs));
223 panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
224 address, ip);
225 }
226
227 show_segv_info(regs);
228
229 if (err == -EACCES) {
230 si.si_signo = SIGBUS;
231 si.si_errno = 0;
232 si.si_code = BUS_ADRERR;
233 si.si_addr = (void __user *)address;
234 current->thread.arch.faultinfo = fi;
235 force_sig_info(SIGBUS, &si, current);
236 } else {
237 BUG_ON(err != -EFAULT);
238 si.si_signo = SIGSEGV;
239 si.si_addr = (void __user *) address;
240 current->thread.arch.faultinfo = fi;
241 force_sig_info(SIGSEGV, &si, current);
242 }
243 return 0;
244}
245
246void relay_signal(int sig, struct uml_pt_regs *regs)
247{
248 if (!UPT_IS_USER(regs)) {
249 if (sig == SIGBUS)
250 printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
251 "mount likely just ran out of space\n");
252 panic("Kernel mode signal %d", sig);
253 }
254
255 arch_examine_signal(sig, regs);
256
257 current->thread.arch.faultinfo = *UPT_FAULTINFO(regs);
258 force_sig(sig, current);
259}
260
261void bus_handler(int sig, struct uml_pt_regs *regs)
262{
263 if (current->thread.fault_catcher != NULL)
264 UML_LONGJMP(current->thread.fault_catcher, 1);
265 else relay_signal(sig, regs);
266}
267
268void winch(int sig, struct uml_pt_regs *regs)
269{
270 do_IRQ(WINCH_IRQ, regs);
271}
272
273void trap_init(void)
274{
275}