Loading...
1/******************************************************************************
2 *
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 *
25 *****************************************************************************/
26
27#include <linux/kernel.h>
28#include <linux/module.h>
29#include <linux/init.h>
30#include <linux/slab.h>
31#include <linux/pci.h>
32#include <linux/dma-mapping.h>
33#include <linux/delay.h>
34#include <linux/sched.h>
35#include <linux/skbuff.h>
36#include <linux/netdevice.h>
37#include <linux/firmware.h>
38#include <linux/etherdevice.h>
39#include <asm/unaligned.h>
40#include <net/mac80211.h>
41
42#include "common.h"
43#include "3945.h"
44
45/* Send led command */
46static int
47il3945_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd)
48{
49 struct il_host_cmd cmd = {
50 .id = C_LEDS,
51 .len = sizeof(struct il_led_cmd),
52 .data = led_cmd,
53 .flags = CMD_ASYNC,
54 .callback = NULL,
55 };
56
57 return il_send_cmd(il, &cmd);
58}
59
60#define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
61 [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \
62 RATE_##r##M_IEEE, \
63 RATE_##ip##M_IDX, \
64 RATE_##in##M_IDX, \
65 RATE_##rp##M_IDX, \
66 RATE_##rn##M_IDX, \
67 RATE_##pp##M_IDX, \
68 RATE_##np##M_IDX, \
69 RATE_##r##M_IDX_TBL, \
70 RATE_##ip##M_IDX_TBL }
71
72/*
73 * Parameter order:
74 * rate, prev rate, next rate, prev tgg rate, next tgg rate
75 *
76 * If there isn't a valid next or previous rate then INV is used which
77 * maps to RATE_INVALID
78 *
79 */
80const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = {
81 IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
82 IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
83 IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
84 IL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */
85 IL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */
86 IL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */
87 IL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */
88 IL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */
89 IL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */
90 IL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */
91 IL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */
92 IL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV), /* 54mbps */
93};
94
95static inline u8
96il3945_get_prev_ieee_rate(u8 rate_idx)
97{
98 u8 rate = il3945_rates[rate_idx].prev_ieee;
99
100 if (rate == RATE_INVALID)
101 rate = rate_idx;
102 return rate;
103}
104
105/* 1 = enable the il3945_disable_events() function */
106#define IL_EVT_DISABLE (0)
107#define IL_EVT_DISABLE_SIZE (1532/32)
108
109/**
110 * il3945_disable_events - Disable selected events in uCode event log
111 *
112 * Disable an event by writing "1"s into "disable"
113 * bitmap in SRAM. Bit position corresponds to Event # (id/type).
114 * Default values of 0 enable uCode events to be logged.
115 * Use for only special debugging. This function is just a placeholder as-is,
116 * you'll need to provide the special bits! ...
117 * ... and set IL_EVT_DISABLE to 1. */
118void
119il3945_disable_events(struct il_priv *il)
120{
121 int i;
122 u32 base; /* SRAM address of event log header */
123 u32 disable_ptr; /* SRAM address of event-disable bitmap array */
124 u32 array_size; /* # of u32 entries in array */
125 static const u32 evt_disable[IL_EVT_DISABLE_SIZE] = {
126 0x00000000, /* 31 - 0 Event id numbers */
127 0x00000000, /* 63 - 32 */
128 0x00000000, /* 95 - 64 */
129 0x00000000, /* 127 - 96 */
130 0x00000000, /* 159 - 128 */
131 0x00000000, /* 191 - 160 */
132 0x00000000, /* 223 - 192 */
133 0x00000000, /* 255 - 224 */
134 0x00000000, /* 287 - 256 */
135 0x00000000, /* 319 - 288 */
136 0x00000000, /* 351 - 320 */
137 0x00000000, /* 383 - 352 */
138 0x00000000, /* 415 - 384 */
139 0x00000000, /* 447 - 416 */
140 0x00000000, /* 479 - 448 */
141 0x00000000, /* 511 - 480 */
142 0x00000000, /* 543 - 512 */
143 0x00000000, /* 575 - 544 */
144 0x00000000, /* 607 - 576 */
145 0x00000000, /* 639 - 608 */
146 0x00000000, /* 671 - 640 */
147 0x00000000, /* 703 - 672 */
148 0x00000000, /* 735 - 704 */
149 0x00000000, /* 767 - 736 */
150 0x00000000, /* 799 - 768 */
151 0x00000000, /* 831 - 800 */
152 0x00000000, /* 863 - 832 */
153 0x00000000, /* 895 - 864 */
154 0x00000000, /* 927 - 896 */
155 0x00000000, /* 959 - 928 */
156 0x00000000, /* 991 - 960 */
157 0x00000000, /* 1023 - 992 */
158 0x00000000, /* 1055 - 1024 */
159 0x00000000, /* 1087 - 1056 */
160 0x00000000, /* 1119 - 1088 */
161 0x00000000, /* 1151 - 1120 */
162 0x00000000, /* 1183 - 1152 */
163 0x00000000, /* 1215 - 1184 */
164 0x00000000, /* 1247 - 1216 */
165 0x00000000, /* 1279 - 1248 */
166 0x00000000, /* 1311 - 1280 */
167 0x00000000, /* 1343 - 1312 */
168 0x00000000, /* 1375 - 1344 */
169 0x00000000, /* 1407 - 1376 */
170 0x00000000, /* 1439 - 1408 */
171 0x00000000, /* 1471 - 1440 */
172 0x00000000, /* 1503 - 1472 */
173 };
174
175 base = le32_to_cpu(il->card_alive.log_event_table_ptr);
176 if (!il3945_hw_valid_rtc_data_addr(base)) {
177 IL_ERR("Invalid event log pointer 0x%08X\n", base);
178 return;
179 }
180
181 disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32)));
182 array_size = il_read_targ_mem(il, base + (5 * sizeof(u32)));
183
184 if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) {
185 D_INFO("Disabling selected uCode log events at 0x%x\n",
186 disable_ptr);
187 for (i = 0; i < IL_EVT_DISABLE_SIZE; i++)
188 il_write_targ_mem(il, disable_ptr + (i * sizeof(u32)),
189 evt_disable[i]);
190
191 } else {
192 D_INFO("Selected uCode log events may be disabled\n");
193 D_INFO(" by writing \"1\"s into disable bitmap\n");
194 D_INFO(" in SRAM at 0x%x, size %d u32s\n", disable_ptr,
195 array_size);
196 }
197
198}
199
200static int
201il3945_hwrate_to_plcp_idx(u8 plcp)
202{
203 int idx;
204
205 for (idx = 0; idx < RATE_COUNT_3945; idx++)
206 if (il3945_rates[idx].plcp == plcp)
207 return idx;
208 return -1;
209}
210
211#ifdef CONFIG_IWLEGACY_DEBUG
212#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
213
214static const char *
215il3945_get_tx_fail_reason(u32 status)
216{
217 switch (status & TX_STATUS_MSK) {
218 case TX_3945_STATUS_SUCCESS:
219 return "SUCCESS";
220 TX_STATUS_ENTRY(SHORT_LIMIT);
221 TX_STATUS_ENTRY(LONG_LIMIT);
222 TX_STATUS_ENTRY(FIFO_UNDERRUN);
223 TX_STATUS_ENTRY(MGMNT_ABORT);
224 TX_STATUS_ENTRY(NEXT_FRAG);
225 TX_STATUS_ENTRY(LIFE_EXPIRE);
226 TX_STATUS_ENTRY(DEST_PS);
227 TX_STATUS_ENTRY(ABORTED);
228 TX_STATUS_ENTRY(BT_RETRY);
229 TX_STATUS_ENTRY(STA_INVALID);
230 TX_STATUS_ENTRY(FRAG_DROPPED);
231 TX_STATUS_ENTRY(TID_DISABLE);
232 TX_STATUS_ENTRY(FRAME_FLUSHED);
233 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
234 TX_STATUS_ENTRY(TX_LOCKED);
235 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
236 }
237
238 return "UNKNOWN";
239}
240#else
241static inline const char *
242il3945_get_tx_fail_reason(u32 status)
243{
244 return "";
245}
246#endif
247
248/*
249 * get ieee prev rate from rate scale table.
250 * for A and B mode we need to overright prev
251 * value
252 */
253int
254il3945_rs_next_rate(struct il_priv *il, int rate)
255{
256 int next_rate = il3945_get_prev_ieee_rate(rate);
257
258 switch (il->band) {
259 case IEEE80211_BAND_5GHZ:
260 if (rate == RATE_12M_IDX)
261 next_rate = RATE_9M_IDX;
262 else if (rate == RATE_6M_IDX)
263 next_rate = RATE_6M_IDX;
264 break;
265 case IEEE80211_BAND_2GHZ:
266 if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
267 il_is_associated(il)) {
268 if (rate == RATE_11M_IDX)
269 next_rate = RATE_5M_IDX;
270 }
271 break;
272
273 default:
274 break;
275 }
276
277 return next_rate;
278}
279
280/**
281 * il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
282 *
283 * When FW advances 'R' idx, all entries between old and new 'R' idx
284 * need to be reclaimed. As result, some free space forms. If there is
285 * enough free space (> low mark), wake the stack that feeds us.
286 */
287static void
288il3945_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx)
289{
290 struct il_tx_queue *txq = &il->txq[txq_id];
291 struct il_queue *q = &txq->q;
292 struct sk_buff *skb;
293
294 BUG_ON(txq_id == IL39_CMD_QUEUE_NUM);
295
296 for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
297 q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
298
299 skb = txq->skbs[txq->q.read_ptr];
300 ieee80211_tx_status_irqsafe(il->hw, skb);
301 txq->skbs[txq->q.read_ptr] = NULL;
302 il->ops->txq_free_tfd(il, txq);
303 }
304
305 if (il_queue_space(q) > q->low_mark && txq_id >= 0 &&
306 txq_id != IL39_CMD_QUEUE_NUM && il->mac80211_registered)
307 il_wake_queue(il, txq);
308}
309
310/**
311 * il3945_hdl_tx - Handle Tx response
312 */
313static void
314il3945_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb)
315{
316 struct il_rx_pkt *pkt = rxb_addr(rxb);
317 u16 sequence = le16_to_cpu(pkt->hdr.sequence);
318 int txq_id = SEQ_TO_QUEUE(sequence);
319 int idx = SEQ_TO_IDX(sequence);
320 struct il_tx_queue *txq = &il->txq[txq_id];
321 struct ieee80211_tx_info *info;
322 struct il3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
323 u32 status = le32_to_cpu(tx_resp->status);
324 int rate_idx;
325 int fail;
326
327 if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
328 IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
329 "is out of range [0-%d] %d %d\n", txq_id, idx,
330 txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr);
331 return;
332 }
333
334 txq->time_stamp = jiffies;
335 info = IEEE80211_SKB_CB(txq->skbs[txq->q.read_ptr]);
336 ieee80211_tx_info_clear_status(info);
337
338 /* Fill the MRR chain with some info about on-chip retransmissions */
339 rate_idx = il3945_hwrate_to_plcp_idx(tx_resp->rate);
340 if (info->band == IEEE80211_BAND_5GHZ)
341 rate_idx -= IL_FIRST_OFDM_RATE;
342
343 fail = tx_resp->failure_frame;
344
345 info->status.rates[0].idx = rate_idx;
346 info->status.rates[0].count = fail + 1; /* add final attempt */
347
348 /* tx_status->rts_retry_count = tx_resp->failure_rts; */
349 info->flags |=
350 ((status & TX_STATUS_MSK) ==
351 TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0;
352
353 D_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", txq_id,
354 il3945_get_tx_fail_reason(status), status, tx_resp->rate,
355 tx_resp->failure_frame);
356
357 D_TX_REPLY("Tx queue reclaim %d\n", idx);
358 il3945_tx_queue_reclaim(il, txq_id, idx);
359
360 if (status & TX_ABORT_REQUIRED_MSK)
361 IL_ERR("TODO: Implement Tx ABORT REQUIRED!!!\n");
362}
363
364/*****************************************************************************
365 *
366 * Intel PRO/Wireless 3945ABG/BG Network Connection
367 *
368 * RX handler implementations
369 *
370 *****************************************************************************/
371#ifdef CONFIG_IWLEGACY_DEBUGFS
372static void
373il3945_accumulative_stats(struct il_priv *il, __le32 * stats)
374{
375 int i;
376 __le32 *prev_stats;
377 u32 *accum_stats;
378 u32 *delta, *max_delta;
379
380 prev_stats = (__le32 *) &il->_3945.stats;
381 accum_stats = (u32 *) &il->_3945.accum_stats;
382 delta = (u32 *) &il->_3945.delta_stats;
383 max_delta = (u32 *) &il->_3945.max_delta;
384
385 for (i = sizeof(__le32); i < sizeof(struct il3945_notif_stats);
386 i +=
387 sizeof(__le32), stats++, prev_stats++, delta++, max_delta++,
388 accum_stats++) {
389 if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
390 *delta =
391 (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats));
392 *accum_stats += *delta;
393 if (*delta > *max_delta)
394 *max_delta = *delta;
395 }
396 }
397
398 /* reset accumulative stats for "no-counter" type stats */
399 il->_3945.accum_stats.general.temperature =
400 il->_3945.stats.general.temperature;
401 il->_3945.accum_stats.general.ttl_timestamp =
402 il->_3945.stats.general.ttl_timestamp;
403}
404#endif
405
406void
407il3945_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb)
408{
409 struct il_rx_pkt *pkt = rxb_addr(rxb);
410
411 D_RX("Statistics notification received (%d vs %d).\n",
412 (int)sizeof(struct il3945_notif_stats),
413 le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK);
414#ifdef CONFIG_IWLEGACY_DEBUGFS
415 il3945_accumulative_stats(il, (__le32 *) &pkt->u.raw);
416#endif
417
418 memcpy(&il->_3945.stats, pkt->u.raw, sizeof(il->_3945.stats));
419}
420
421void
422il3945_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb)
423{
424 struct il_rx_pkt *pkt = rxb_addr(rxb);
425 __le32 *flag = (__le32 *) &pkt->u.raw;
426
427 if (le32_to_cpu(*flag) & UCODE_STATS_CLEAR_MSK) {
428#ifdef CONFIG_IWLEGACY_DEBUGFS
429 memset(&il->_3945.accum_stats, 0,
430 sizeof(struct il3945_notif_stats));
431 memset(&il->_3945.delta_stats, 0,
432 sizeof(struct il3945_notif_stats));
433 memset(&il->_3945.max_delta, 0,
434 sizeof(struct il3945_notif_stats));
435#endif
436 D_RX("Statistics have been cleared\n");
437 }
438 il3945_hdl_stats(il, rxb);
439}
440
441/******************************************************************************
442 *
443 * Misc. internal state and helper functions
444 *
445 ******************************************************************************/
446
447/* This is necessary only for a number of stats, see the caller. */
448static int
449il3945_is_network_packet(struct il_priv *il, struct ieee80211_hdr *header)
450{
451 /* Filter incoming packets to determine if they are targeted toward
452 * this network, discarding packets coming from ourselves */
453 switch (il->iw_mode) {
454 case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */
455 /* packets to our IBSS update information */
456 return ether_addr_equal(header->addr3, il->bssid);
457 case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
458 /* packets to our IBSS update information */
459 return ether_addr_equal(header->addr2, il->bssid);
460 default:
461 return 1;
462 }
463}
464
465static void
466il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb,
467 struct ieee80211_rx_status *stats)
468{
469 struct il_rx_pkt *pkt = rxb_addr(rxb);
470 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
471 struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
472 struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
473 u16 len = le16_to_cpu(rx_hdr->len);
474 struct sk_buff *skb;
475 __le16 fc = hdr->frame_control;
476
477 /* We received data from the HW, so stop the watchdog */
478 if (unlikely
479 (len + IL39_RX_FRAME_SIZE >
480 PAGE_SIZE << il->hw_params.rx_page_order)) {
481 D_DROP("Corruption detected!\n");
482 return;
483 }
484
485 /* We only process data packets if the interface is open */
486 if (unlikely(!il->is_open)) {
487 D_DROP("Dropping packet while interface is not open.\n");
488 return;
489 }
490
491 skb = dev_alloc_skb(128);
492 if (!skb) {
493 IL_ERR("dev_alloc_skb failed\n");
494 return;
495 }
496
497 if (!il3945_mod_params.sw_crypto)
498 il_set_decrypted_flag(il, (struct ieee80211_hdr *)rxb_addr(rxb),
499 le32_to_cpu(rx_end->status), stats);
500
501 skb_add_rx_frag(skb, 0, rxb->page,
502 (void *)rx_hdr->payload - (void *)pkt, len,
503 len);
504
505 il_update_stats(il, false, fc, len);
506 memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
507
508 ieee80211_rx(il->hw, skb);
509 il->alloc_rxb_page--;
510 rxb->page = NULL;
511}
512
513#define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
514
515static void
516il3945_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb)
517{
518 struct ieee80211_hdr *header;
519 struct ieee80211_rx_status rx_status;
520 struct il_rx_pkt *pkt = rxb_addr(rxb);
521 struct il3945_rx_frame_stats *rx_stats = IL_RX_STATS(pkt);
522 struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
523 struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
524 u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
525 u16 rx_stats_noise_diff __maybe_unused =
526 le16_to_cpu(rx_stats->noise_diff);
527 u8 network_packet;
528
529 rx_status.flag = 0;
530 rx_status.mactime = le64_to_cpu(rx_end->timestamp);
531 rx_status.band =
532 (rx_hdr->
533 phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? IEEE80211_BAND_2GHZ :
534 IEEE80211_BAND_5GHZ;
535 rx_status.freq =
536 ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
537 rx_status.band);
538
539 rx_status.rate_idx = il3945_hwrate_to_plcp_idx(rx_hdr->rate);
540 if (rx_status.band == IEEE80211_BAND_5GHZ)
541 rx_status.rate_idx -= IL_FIRST_OFDM_RATE;
542
543 rx_status.antenna =
544 (le16_to_cpu(rx_hdr->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >>
545 4;
546
547 /* set the preamble flag if appropriate */
548 if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
549 rx_status.flag |= RX_FLAG_SHORTPRE;
550
551 if ((unlikely(rx_stats->phy_count > 20))) {
552 D_DROP("dsp size out of range [0,20]: %d/n",
553 rx_stats->phy_count);
554 return;
555 }
556
557 if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) ||
558 !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
559 D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
560 return;
561 }
562
563 /* Convert 3945's rssi indicator to dBm */
564 rx_status.signal = rx_stats->rssi - IL39_RSSI_OFFSET;
565
566 D_STATS("Rssi %d sig_avg %d noise_diff %d\n", rx_status.signal,
567 rx_stats_sig_avg, rx_stats_noise_diff);
568
569 header = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
570
571 network_packet = il3945_is_network_packet(il, header);
572
573 D_STATS("[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
574 network_packet ? '*' : ' ', le16_to_cpu(rx_hdr->channel),
575 rx_status.signal, rx_status.signal, rx_status.rate_idx);
576
577 if (network_packet) {
578 il->_3945.last_beacon_time =
579 le32_to_cpu(rx_end->beacon_timestamp);
580 il->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
581 il->_3945.last_rx_rssi = rx_status.signal;
582 }
583
584 il3945_pass_packet_to_mac80211(il, rxb, &rx_status);
585}
586
587int
588il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
589 dma_addr_t addr, u16 len, u8 reset, u8 pad)
590{
591 int count;
592 struct il_queue *q;
593 struct il3945_tfd *tfd, *tfd_tmp;
594
595 q = &txq->q;
596 tfd_tmp = (struct il3945_tfd *)txq->tfds;
597 tfd = &tfd_tmp[q->write_ptr];
598
599 if (reset)
600 memset(tfd, 0, sizeof(*tfd));
601
602 count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
603
604 if (count >= NUM_TFD_CHUNKS || count < 0) {
605 IL_ERR("Error can not send more than %d chunks\n",
606 NUM_TFD_CHUNKS);
607 return -EINVAL;
608 }
609
610 tfd->tbs[count].addr = cpu_to_le32(addr);
611 tfd->tbs[count].len = cpu_to_le32(len);
612
613 count++;
614
615 tfd->control_flags =
616 cpu_to_le32(TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad));
617
618 return 0;
619}
620
621/**
622 * il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr]
623 *
624 * Does NOT advance any idxes
625 */
626void
627il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
628{
629 struct il3945_tfd *tfd_tmp = (struct il3945_tfd *)txq->tfds;
630 int idx = txq->q.read_ptr;
631 struct il3945_tfd *tfd = &tfd_tmp[idx];
632 struct pci_dev *dev = il->pci_dev;
633 int i;
634 int counter;
635
636 /* sanity check */
637 counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
638 if (counter > NUM_TFD_CHUNKS) {
639 IL_ERR("Too many chunks: %i\n", counter);
640 /* @todo issue fatal error, it is quite serious situation */
641 return;
642 }
643
644 /* Unmap tx_cmd */
645 if (counter)
646 pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping),
647 dma_unmap_len(&txq->meta[idx], len),
648 PCI_DMA_TODEVICE);
649
650 /* unmap chunks if any */
651
652 for (i = 1; i < counter; i++)
653 pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
654 le32_to_cpu(tfd->tbs[i].len),
655 PCI_DMA_TODEVICE);
656
657 /* free SKB */
658 if (txq->skbs) {
659 struct sk_buff *skb = txq->skbs[txq->q.read_ptr];
660
661 /* can be called from irqs-disabled context */
662 if (skb) {
663 dev_kfree_skb_any(skb);
664 txq->skbs[txq->q.read_ptr] = NULL;
665 }
666 }
667}
668
669/**
670 * il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
671 *
672*/
673void
674il3945_hw_build_tx_cmd_rate(struct il_priv *il, struct il_device_cmd *cmd,
675 struct ieee80211_tx_info *info,
676 struct ieee80211_hdr *hdr, int sta_id)
677{
678 u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value;
679 u16 rate_idx = min(hw_value & 0xffff, RATE_COUNT_3945 - 1);
680 u16 rate_mask;
681 int rate;
682 const u8 rts_retry_limit = 7;
683 u8 data_retry_limit;
684 __le32 tx_flags;
685 __le16 fc = hdr->frame_control;
686 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
687
688 rate = il3945_rates[rate_idx].plcp;
689 tx_flags = tx_cmd->tx_flags;
690
691 /* We need to figure out how to get the sta->supp_rates while
692 * in this running context */
693 rate_mask = RATES_MASK_3945;
694
695 /* Set retry limit on DATA packets and Probe Responses */
696 if (ieee80211_is_probe_resp(fc))
697 data_retry_limit = 3;
698 else
699 data_retry_limit = IL_DEFAULT_TX_RETRY;
700 tx_cmd->data_retry_limit = data_retry_limit;
701 /* Set retry limit on RTS packets */
702 tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit);
703
704 tx_cmd->rate = rate;
705 tx_cmd->tx_flags = tx_flags;
706
707 /* OFDM */
708 tx_cmd->supp_rates[0] =
709 ((rate_mask & IL_OFDM_RATES_MASK) >> IL_FIRST_OFDM_RATE) & 0xFF;
710
711 /* CCK */
712 tx_cmd->supp_rates[1] = (rate_mask & 0xF);
713
714 D_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
715 "cck/ofdm mask: 0x%x/0x%x\n", sta_id, tx_cmd->rate,
716 le32_to_cpu(tx_cmd->tx_flags), tx_cmd->supp_rates[1],
717 tx_cmd->supp_rates[0]);
718}
719
720static u8
721il3945_sync_sta(struct il_priv *il, int sta_id, u16 tx_rate)
722{
723 unsigned long flags_spin;
724 struct il_station_entry *station;
725
726 if (sta_id == IL_INVALID_STATION)
727 return IL_INVALID_STATION;
728
729 spin_lock_irqsave(&il->sta_lock, flags_spin);
730 station = &il->stations[sta_id];
731
732 station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
733 station->sta.rate_n_flags = cpu_to_le16(tx_rate);
734 station->sta.mode = STA_CONTROL_MODIFY_MSK;
735 il_send_add_sta(il, &station->sta, CMD_ASYNC);
736 spin_unlock_irqrestore(&il->sta_lock, flags_spin);
737
738 D_RATE("SCALE sync station %d to rate %d\n", sta_id, tx_rate);
739 return sta_id;
740}
741
742static void
743il3945_set_pwr_vmain(struct il_priv *il)
744{
745/*
746 * (for documentation purposes)
747 * to set power to V_AUX, do
748
749 if (pci_pme_capable(il->pci_dev, PCI_D3cold)) {
750 il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
751 APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
752 ~APMG_PS_CTRL_MSK_PWR_SRC);
753
754 _il_poll_bit(il, CSR_GPIO_IN,
755 CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
756 CSR_GPIO_IN_BIT_AUX_POWER, 5000);
757 }
758 */
759
760 il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
761 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
762 ~APMG_PS_CTRL_MSK_PWR_SRC);
763
764 _il_poll_bit(il, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
765 CSR_GPIO_IN_BIT_AUX_POWER, 5000);
766}
767
768static int
769il3945_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
770{
771 il_wr(il, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
772 il_wr(il, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
773 il_wr(il, FH39_RCSR_WPTR(0), 0);
774 il_wr(il, FH39_RCSR_CONFIG(0),
775 FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
776 FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
777 FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
778 FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | (RX_QUEUE_SIZE_LOG
779 <<
780 FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE)
781 | FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | (1 <<
782 FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH)
783 | FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
784
785 /* fake read to flush all prev I/O */
786 il_rd(il, FH39_RSSR_CTRL);
787
788 return 0;
789}
790
791static int
792il3945_tx_reset(struct il_priv *il)
793{
794 /* bypass mode */
795 il_wr_prph(il, ALM_SCD_MODE_REG, 0x2);
796
797 /* RA 0 is active */
798 il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01);
799
800 /* all 6 fifo are active */
801 il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f);
802
803 il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
804 il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
805 il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004);
806 il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005);
807
808 il_wr(il, FH39_TSSR_CBB_BASE, il->_3945.shared_phys);
809
810 il_wr(il, FH39_TSSR_MSG_CONFIG,
811 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
812 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
813 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
814 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
815 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
816 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
817 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
818
819 return 0;
820}
821
822/**
823 * il3945_txq_ctx_reset - Reset TX queue context
824 *
825 * Destroys all DMA structures and initialize them again
826 */
827static int
828il3945_txq_ctx_reset(struct il_priv *il)
829{
830 int rc, txq_id;
831
832 il3945_hw_txq_ctx_free(il);
833
834 /* allocate tx queue structure */
835 rc = il_alloc_txq_mem(il);
836 if (rc)
837 return rc;
838
839 /* Tx CMD queue */
840 rc = il3945_tx_reset(il);
841 if (rc)
842 goto error;
843
844 /* Tx queue(s) */
845 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
846 rc = il_tx_queue_init(il, txq_id);
847 if (rc) {
848 IL_ERR("Tx %d queue init failed\n", txq_id);
849 goto error;
850 }
851 }
852
853 return rc;
854
855error:
856 il3945_hw_txq_ctx_free(il);
857 return rc;
858}
859
860/*
861 * Start up 3945's basic functionality after it has been reset
862 * (e.g. after platform boot, or shutdown via il_apm_stop())
863 * NOTE: This does not load uCode nor start the embedded processor
864 */
865static int
866il3945_apm_init(struct il_priv *il)
867{
868 int ret = il_apm_init(il);
869
870 /* Clear APMG (NIC's internal power management) interrupts */
871 il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0);
872 il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
873
874 /* Reset radio chip */
875 il_set_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
876 udelay(5);
877 il_clear_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
878
879 return ret;
880}
881
882static void
883il3945_nic_config(struct il_priv *il)
884{
885 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
886 unsigned long flags;
887 u8 rev_id = il->pci_dev->revision;
888
889 spin_lock_irqsave(&il->lock, flags);
890
891 /* Determine HW type */
892 D_INFO("HW Revision ID = 0x%X\n", rev_id);
893
894 if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
895 D_INFO("RTP type\n");
896 else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
897 D_INFO("3945 RADIO-MB type\n");
898 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
899 CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
900 } else {
901 D_INFO("3945 RADIO-MM type\n");
902 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
903 CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
904 }
905
906 if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
907 D_INFO("SKU OP mode is mrc\n");
908 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
909 CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
910 } else
911 D_INFO("SKU OP mode is basic\n");
912
913 if ((eeprom->board_revision & 0xF0) == 0xD0) {
914 D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision);
915 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
916 CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
917 } else {
918 D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision);
919 il_clear_bit(il, CSR_HW_IF_CONFIG_REG,
920 CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
921 }
922
923 if (eeprom->almgor_m_version <= 1) {
924 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
925 CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
926 D_INFO("Card M type A version is 0x%X\n",
927 eeprom->almgor_m_version);
928 } else {
929 D_INFO("Card M type B version is 0x%X\n",
930 eeprom->almgor_m_version);
931 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
932 CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
933 }
934 spin_unlock_irqrestore(&il->lock, flags);
935
936 if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
937 D_RF_KILL("SW RF KILL supported in EEPROM.\n");
938
939 if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
940 D_RF_KILL("HW RF KILL supported in EEPROM.\n");
941}
942
943int
944il3945_hw_nic_init(struct il_priv *il)
945{
946 int rc;
947 unsigned long flags;
948 struct il_rx_queue *rxq = &il->rxq;
949
950 spin_lock_irqsave(&il->lock, flags);
951 il3945_apm_init(il);
952 spin_unlock_irqrestore(&il->lock, flags);
953
954 il3945_set_pwr_vmain(il);
955 il3945_nic_config(il);
956
957 /* Allocate the RX queue, or reset if it is already allocated */
958 if (!rxq->bd) {
959 rc = il_rx_queue_alloc(il);
960 if (rc) {
961 IL_ERR("Unable to initialize Rx queue\n");
962 return -ENOMEM;
963 }
964 } else
965 il3945_rx_queue_reset(il, rxq);
966
967 il3945_rx_replenish(il);
968
969 il3945_rx_init(il, rxq);
970
971 /* Look at using this instead:
972 rxq->need_update = 1;
973 il_rx_queue_update_write_ptr(il, rxq);
974 */
975
976 il_wr(il, FH39_RCSR_WPTR(0), rxq->write & ~7);
977
978 rc = il3945_txq_ctx_reset(il);
979 if (rc)
980 return rc;
981
982 set_bit(S_INIT, &il->status);
983
984 return 0;
985}
986
987/**
988 * il3945_hw_txq_ctx_free - Free TXQ Context
989 *
990 * Destroy all TX DMA queues and structures
991 */
992void
993il3945_hw_txq_ctx_free(struct il_priv *il)
994{
995 int txq_id;
996
997 /* Tx queues */
998 if (il->txq)
999 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
1000 if (txq_id == IL39_CMD_QUEUE_NUM)
1001 il_cmd_queue_free(il);
1002 else
1003 il_tx_queue_free(il, txq_id);
1004
1005 /* free tx queue structure */
1006 il_free_txq_mem(il);
1007}
1008
1009void
1010il3945_hw_txq_ctx_stop(struct il_priv *il)
1011{
1012 int txq_id;
1013
1014 /* stop SCD */
1015 _il_wr_prph(il, ALM_SCD_MODE_REG, 0);
1016 _il_wr_prph(il, ALM_SCD_TXFACT_REG, 0);
1017
1018 /* reset TFD queues */
1019 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
1020 _il_wr(il, FH39_TCSR_CONFIG(txq_id), 0x0);
1021 _il_poll_bit(il, FH39_TSSR_TX_STATUS,
1022 FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
1023 FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
1024 1000);
1025 }
1026}
1027
1028/**
1029 * il3945_hw_reg_adjust_power_by_temp
1030 * return idx delta into power gain settings table
1031*/
1032static int
1033il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
1034{
1035 return (new_reading - old_reading) * (-11) / 100;
1036}
1037
1038/**
1039 * il3945_hw_reg_temp_out_of_range - Keep temperature in sane range
1040 */
1041static inline int
1042il3945_hw_reg_temp_out_of_range(int temperature)
1043{
1044 return (temperature < -260 || temperature > 25) ? 1 : 0;
1045}
1046
1047int
1048il3945_hw_get_temperature(struct il_priv *il)
1049{
1050 return _il_rd(il, CSR_UCODE_DRV_GP2);
1051}
1052
1053/**
1054 * il3945_hw_reg_txpower_get_temperature
1055 * get the current temperature by reading from NIC
1056*/
1057static int
1058il3945_hw_reg_txpower_get_temperature(struct il_priv *il)
1059{
1060 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1061 int temperature;
1062
1063 temperature = il3945_hw_get_temperature(il);
1064
1065 /* driver's okay range is -260 to +25.
1066 * human readable okay range is 0 to +285 */
1067 D_INFO("Temperature: %d\n", temperature + IL_TEMP_CONVERT);
1068
1069 /* handle insane temp reading */
1070 if (il3945_hw_reg_temp_out_of_range(temperature)) {
1071 IL_ERR("Error bad temperature value %d\n", temperature);
1072
1073 /* if really really hot(?),
1074 * substitute the 3rd band/group's temp measured at factory */
1075 if (il->last_temperature > 100)
1076 temperature = eeprom->groups[2].temperature;
1077 else /* else use most recent "sane" value from driver */
1078 temperature = il->last_temperature;
1079 }
1080
1081 return temperature; /* raw, not "human readable" */
1082}
1083
1084/* Adjust Txpower only if temperature variance is greater than threshold.
1085 *
1086 * Both are lower than older versions' 9 degrees */
1087#define IL_TEMPERATURE_LIMIT_TIMER 6
1088
1089/**
1090 * il3945_is_temp_calib_needed - determines if new calibration is needed
1091 *
1092 * records new temperature in tx_mgr->temperature.
1093 * replaces tx_mgr->last_temperature *only* if calib needed
1094 * (assumes caller will actually do the calibration!). */
1095static int
1096il3945_is_temp_calib_needed(struct il_priv *il)
1097{
1098 int temp_diff;
1099
1100 il->temperature = il3945_hw_reg_txpower_get_temperature(il);
1101 temp_diff = il->temperature - il->last_temperature;
1102
1103 /* get absolute value */
1104 if (temp_diff < 0) {
1105 D_POWER("Getting cooler, delta %d,\n", temp_diff);
1106 temp_diff = -temp_diff;
1107 } else if (temp_diff == 0)
1108 D_POWER("Same temp,\n");
1109 else
1110 D_POWER("Getting warmer, delta %d,\n", temp_diff);
1111
1112 /* if we don't need calibration, *don't* update last_temperature */
1113 if (temp_diff < IL_TEMPERATURE_LIMIT_TIMER) {
1114 D_POWER("Timed thermal calib not needed\n");
1115 return 0;
1116 }
1117
1118 D_POWER("Timed thermal calib needed\n");
1119
1120 /* assume that caller will actually do calib ...
1121 * update the "last temperature" value */
1122 il->last_temperature = il->temperature;
1123 return 1;
1124}
1125
1126#define IL_MAX_GAIN_ENTRIES 78
1127#define IL_CCK_FROM_OFDM_POWER_DIFF -5
1128#define IL_CCK_FROM_OFDM_IDX_DIFF (10)
1129
1130/* radio and DSP power table, each step is 1/2 dB.
1131 * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
1132static struct il3945_tx_power power_gain_table[2][IL_MAX_GAIN_ENTRIES] = {
1133 {
1134 {251, 127}, /* 2.4 GHz, highest power */
1135 {251, 127},
1136 {251, 127},
1137 {251, 127},
1138 {251, 125},
1139 {251, 110},
1140 {251, 105},
1141 {251, 98},
1142 {187, 125},
1143 {187, 115},
1144 {187, 108},
1145 {187, 99},
1146 {243, 119},
1147 {243, 111},
1148 {243, 105},
1149 {243, 97},
1150 {243, 92},
1151 {211, 106},
1152 {211, 100},
1153 {179, 120},
1154 {179, 113},
1155 {179, 107},
1156 {147, 125},
1157 {147, 119},
1158 {147, 112},
1159 {147, 106},
1160 {147, 101},
1161 {147, 97},
1162 {147, 91},
1163 {115, 107},
1164 {235, 121},
1165 {235, 115},
1166 {235, 109},
1167 {203, 127},
1168 {203, 121},
1169 {203, 115},
1170 {203, 108},
1171 {203, 102},
1172 {203, 96},
1173 {203, 92},
1174 {171, 110},
1175 {171, 104},
1176 {171, 98},
1177 {139, 116},
1178 {227, 125},
1179 {227, 119},
1180 {227, 113},
1181 {227, 107},
1182 {227, 101},
1183 {227, 96},
1184 {195, 113},
1185 {195, 106},
1186 {195, 102},
1187 {195, 95},
1188 {163, 113},
1189 {163, 106},
1190 {163, 102},
1191 {163, 95},
1192 {131, 113},
1193 {131, 106},
1194 {131, 102},
1195 {131, 95},
1196 {99, 113},
1197 {99, 106},
1198 {99, 102},
1199 {99, 95},
1200 {67, 113},
1201 {67, 106},
1202 {67, 102},
1203 {67, 95},
1204 {35, 113},
1205 {35, 106},
1206 {35, 102},
1207 {35, 95},
1208 {3, 113},
1209 {3, 106},
1210 {3, 102},
1211 {3, 95} /* 2.4 GHz, lowest power */
1212 },
1213 {
1214 {251, 127}, /* 5.x GHz, highest power */
1215 {251, 120},
1216 {251, 114},
1217 {219, 119},
1218 {219, 101},
1219 {187, 113},
1220 {187, 102},
1221 {155, 114},
1222 {155, 103},
1223 {123, 117},
1224 {123, 107},
1225 {123, 99},
1226 {123, 92},
1227 {91, 108},
1228 {59, 125},
1229 {59, 118},
1230 {59, 109},
1231 {59, 102},
1232 {59, 96},
1233 {59, 90},
1234 {27, 104},
1235 {27, 98},
1236 {27, 92},
1237 {115, 118},
1238 {115, 111},
1239 {115, 104},
1240 {83, 126},
1241 {83, 121},
1242 {83, 113},
1243 {83, 105},
1244 {83, 99},
1245 {51, 118},
1246 {51, 111},
1247 {51, 104},
1248 {51, 98},
1249 {19, 116},
1250 {19, 109},
1251 {19, 102},
1252 {19, 98},
1253 {19, 93},
1254 {171, 113},
1255 {171, 107},
1256 {171, 99},
1257 {139, 120},
1258 {139, 113},
1259 {139, 107},
1260 {139, 99},
1261 {107, 120},
1262 {107, 113},
1263 {107, 107},
1264 {107, 99},
1265 {75, 120},
1266 {75, 113},
1267 {75, 107},
1268 {75, 99},
1269 {43, 120},
1270 {43, 113},
1271 {43, 107},
1272 {43, 99},
1273 {11, 120},
1274 {11, 113},
1275 {11, 107},
1276 {11, 99},
1277 {131, 107},
1278 {131, 99},
1279 {99, 120},
1280 {99, 113},
1281 {99, 107},
1282 {99, 99},
1283 {67, 120},
1284 {67, 113},
1285 {67, 107},
1286 {67, 99},
1287 {35, 120},
1288 {35, 113},
1289 {35, 107},
1290 {35, 99},
1291 {3, 120} /* 5.x GHz, lowest power */
1292 }
1293};
1294
1295static inline u8
1296il3945_hw_reg_fix_power_idx(int idx)
1297{
1298 if (idx < 0)
1299 return 0;
1300 if (idx >= IL_MAX_GAIN_ENTRIES)
1301 return IL_MAX_GAIN_ENTRIES - 1;
1302 return (u8) idx;
1303}
1304
1305/* Kick off thermal recalibration check every 60 seconds */
1306#define REG_RECALIB_PERIOD (60)
1307
1308/**
1309 * il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
1310 *
1311 * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
1312 * or 6 Mbit (OFDM) rates.
1313 */
1314static void
1315il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx, s32 rate_idx,
1316 const s8 *clip_pwrs,
1317 struct il_channel_info *ch_info, int band_idx)
1318{
1319 struct il3945_scan_power_info *scan_power_info;
1320 s8 power;
1321 u8 power_idx;
1322
1323 scan_power_info = &ch_info->scan_pwr_info[scan_tbl_idx];
1324
1325 /* use this channel group's 6Mbit clipping/saturation pwr,
1326 * but cap at regulatory scan power restriction (set during init
1327 * based on eeprom channel data) for this channel. */
1328 power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]);
1329
1330 power = min(power, il->tx_power_user_lmt);
1331 scan_power_info->requested_power = power;
1332
1333 /* find difference between new scan *power* and current "normal"
1334 * Tx *power* for 6Mb. Use this difference (x2) to adjust the
1335 * current "normal" temperature-compensated Tx power *idx* for
1336 * this rate (1Mb or 6Mb) to yield new temp-compensated scan power
1337 * *idx*. */
1338 power_idx =
1339 ch_info->power_info[rate_idx].power_table_idx - (power -
1340 ch_info->
1341 power_info
1342 [RATE_6M_IDX_TBL].
1343 requested_power) *
1344 2;
1345
1346 /* store reference idx that we use when adjusting *all* scan
1347 * powers. So we can accommodate user (all channel) or spectrum
1348 * management (single channel) power changes "between" temperature
1349 * feedback compensation procedures.
1350 * don't force fit this reference idx into gain table; it may be a
1351 * negative number. This will help avoid errors when we're at
1352 * the lower bounds (highest gains, for warmest temperatures)
1353 * of the table. */
1354
1355 /* don't exceed table bounds for "real" setting */
1356 power_idx = il3945_hw_reg_fix_power_idx(power_idx);
1357
1358 scan_power_info->power_table_idx = power_idx;
1359 scan_power_info->tpc.tx_gain =
1360 power_gain_table[band_idx][power_idx].tx_gain;
1361 scan_power_info->tpc.dsp_atten =
1362 power_gain_table[band_idx][power_idx].dsp_atten;
1363}
1364
1365/**
1366 * il3945_send_tx_power - fill in Tx Power command with gain settings
1367 *
1368 * Configures power settings for all rates for the current channel,
1369 * using values from channel info struct, and send to NIC
1370 */
1371static int
1372il3945_send_tx_power(struct il_priv *il)
1373{
1374 int rate_idx, i;
1375 const struct il_channel_info *ch_info = NULL;
1376 struct il3945_txpowertable_cmd txpower = {
1377 .channel = il->active.channel,
1378 };
1379 u16 chan;
1380
1381 if (WARN_ONCE
1382 (test_bit(S_SCAN_HW, &il->status),
1383 "TX Power requested while scanning!\n"))
1384 return -EAGAIN;
1385
1386 chan = le16_to_cpu(il->active.channel);
1387
1388 txpower.band = (il->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
1389 ch_info = il_get_channel_info(il, il->band, chan);
1390 if (!ch_info) {
1391 IL_ERR("Failed to get channel info for channel %d [%d]\n", chan,
1392 il->band);
1393 return -EINVAL;
1394 }
1395
1396 if (!il_is_channel_valid(ch_info)) {
1397 D_POWER("Not calling TX_PWR_TBL_CMD on " "non-Tx channel.\n");
1398 return 0;
1399 }
1400
1401 /* fill cmd with power settings for all rates for current channel */
1402 /* Fill OFDM rate */
1403 for (rate_idx = IL_FIRST_OFDM_RATE, i = 0;
1404 rate_idx <= IL39_LAST_OFDM_RATE; rate_idx++, i++) {
1405
1406 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1407 txpower.power[i].rate = il3945_rates[rate_idx].plcp;
1408
1409 D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1410 le16_to_cpu(txpower.channel), txpower.band,
1411 txpower.power[i].tpc.tx_gain,
1412 txpower.power[i].tpc.dsp_atten, txpower.power[i].rate);
1413 }
1414 /* Fill CCK rates */
1415 for (rate_idx = IL_FIRST_CCK_RATE; rate_idx <= IL_LAST_CCK_RATE;
1416 rate_idx++, i++) {
1417 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1418 txpower.power[i].rate = il3945_rates[rate_idx].plcp;
1419
1420 D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1421 le16_to_cpu(txpower.channel), txpower.band,
1422 txpower.power[i].tpc.tx_gain,
1423 txpower.power[i].tpc.dsp_atten, txpower.power[i].rate);
1424 }
1425
1426 return il_send_cmd_pdu(il, C_TX_PWR_TBL,
1427 sizeof(struct il3945_txpowertable_cmd),
1428 &txpower);
1429
1430}
1431
1432/**
1433 * il3945_hw_reg_set_new_power - Configures power tables at new levels
1434 * @ch_info: Channel to update. Uses power_info.requested_power.
1435 *
1436 * Replace requested_power and base_power_idx ch_info fields for
1437 * one channel.
1438 *
1439 * Called if user or spectrum management changes power preferences.
1440 * Takes into account h/w and modulation limitations (clip power).
1441 *
1442 * This does *not* send anything to NIC, just sets up ch_info for one channel.
1443 *
1444 * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
1445 * properly fill out the scan powers, and actual h/w gain settings,
1446 * and send changes to NIC
1447 */
1448static int
1449il3945_hw_reg_set_new_power(struct il_priv *il, struct il_channel_info *ch_info)
1450{
1451 struct il3945_channel_power_info *power_info;
1452 int power_changed = 0;
1453 int i;
1454 const s8 *clip_pwrs;
1455 int power;
1456
1457 /* Get this chnlgrp's rate-to-max/clip-powers table */
1458 clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers;
1459
1460 /* Get this channel's rate-to-current-power settings table */
1461 power_info = ch_info->power_info;
1462
1463 /* update OFDM Txpower settings */
1464 for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++, ++power_info) {
1465 int delta_idx;
1466
1467 /* limit new power to be no more than h/w capability */
1468 power = min(ch_info->curr_txpow, clip_pwrs[i]);
1469 if (power == power_info->requested_power)
1470 continue;
1471
1472 /* find difference between old and new requested powers,
1473 * update base (non-temp-compensated) power idx */
1474 delta_idx = (power - power_info->requested_power) * 2;
1475 power_info->base_power_idx -= delta_idx;
1476
1477 /* save new requested power value */
1478 power_info->requested_power = power;
1479
1480 power_changed = 1;
1481 }
1482
1483 /* update CCK Txpower settings, based on OFDM 12M setting ...
1484 * ... all CCK power settings for a given channel are the *same*. */
1485 if (power_changed) {
1486 power =
1487 ch_info->power_info[RATE_12M_IDX_TBL].requested_power +
1488 IL_CCK_FROM_OFDM_POWER_DIFF;
1489
1490 /* do all CCK rates' il3945_channel_power_info structures */
1491 for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) {
1492 power_info->requested_power = power;
1493 power_info->base_power_idx =
1494 ch_info->power_info[RATE_12M_IDX_TBL].
1495 base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
1496 ++power_info;
1497 }
1498 }
1499
1500 return 0;
1501}
1502
1503/**
1504 * il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
1505 *
1506 * NOTE: Returned power limit may be less (but not more) than requested,
1507 * based strictly on regulatory (eeprom and spectrum mgt) limitations
1508 * (no consideration for h/w clipping limitations).
1509 */
1510static int
1511il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info)
1512{
1513 s8 max_power;
1514
1515#if 0
1516 /* if we're using TGd limits, use lower of TGd or EEPROM */
1517 if (ch_info->tgd_data.max_power != 0)
1518 max_power =
1519 min(ch_info->tgd_data.max_power,
1520 ch_info->eeprom.max_power_avg);
1521
1522 /* else just use EEPROM limits */
1523 else
1524#endif
1525 max_power = ch_info->eeprom.max_power_avg;
1526
1527 return min(max_power, ch_info->max_power_avg);
1528}
1529
1530/**
1531 * il3945_hw_reg_comp_txpower_temp - Compensate for temperature
1532 *
1533 * Compensate txpower settings of *all* channels for temperature.
1534 * This only accounts for the difference between current temperature
1535 * and the factory calibration temperatures, and bases the new settings
1536 * on the channel's base_power_idx.
1537 *
1538 * If RxOn is "associated", this sends the new Txpower to NIC!
1539 */
1540static int
1541il3945_hw_reg_comp_txpower_temp(struct il_priv *il)
1542{
1543 struct il_channel_info *ch_info = NULL;
1544 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1545 int delta_idx;
1546 const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
1547 u8 a_band;
1548 u8 rate_idx;
1549 u8 scan_tbl_idx;
1550 u8 i;
1551 int ref_temp;
1552 int temperature = il->temperature;
1553
1554 if (il->disable_tx_power_cal || test_bit(S_SCANNING, &il->status)) {
1555 /* do not perform tx power calibration */
1556 return 0;
1557 }
1558 /* set up new Tx power info for each and every channel, 2.4 and 5.x */
1559 for (i = 0; i < il->channel_count; i++) {
1560 ch_info = &il->channel_info[i];
1561 a_band = il_is_channel_a_band(ch_info);
1562
1563 /* Get this chnlgrp's factory calibration temperature */
1564 ref_temp = (s16) eeprom->groups[ch_info->group_idx].temperature;
1565
1566 /* get power idx adjustment based on current and factory
1567 * temps */
1568 delta_idx =
1569 il3945_hw_reg_adjust_power_by_temp(temperature, ref_temp);
1570
1571 /* set tx power value for all rates, OFDM and CCK */
1572 for (rate_idx = 0; rate_idx < RATE_COUNT_3945; rate_idx++) {
1573 int power_idx =
1574 ch_info->power_info[rate_idx].base_power_idx;
1575
1576 /* temperature compensate */
1577 power_idx += delta_idx;
1578
1579 /* stay within table range */
1580 power_idx = il3945_hw_reg_fix_power_idx(power_idx);
1581 ch_info->power_info[rate_idx].power_table_idx =
1582 (u8) power_idx;
1583 ch_info->power_info[rate_idx].tpc =
1584 power_gain_table[a_band][power_idx];
1585 }
1586
1587 /* Get this chnlgrp's rate-to-max/clip-powers table */
1588 clip_pwrs =
1589 il->_3945.clip_groups[ch_info->group_idx].clip_powers;
1590
1591 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
1592 for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES;
1593 scan_tbl_idx++) {
1594 s32 actual_idx =
1595 (scan_tbl_idx ==
1596 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
1597 il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
1598 actual_idx, clip_pwrs,
1599 ch_info, a_band);
1600 }
1601 }
1602
1603 /* send Txpower command for current channel to ucode */
1604 return il->ops->send_tx_power(il);
1605}
1606
1607int
1608il3945_hw_reg_set_txpower(struct il_priv *il, s8 power)
1609{
1610 struct il_channel_info *ch_info;
1611 s8 max_power;
1612 u8 a_band;
1613 u8 i;
1614
1615 if (il->tx_power_user_lmt == power) {
1616 D_POWER("Requested Tx power same as current " "limit: %ddBm.\n",
1617 power);
1618 return 0;
1619 }
1620
1621 D_POWER("Setting upper limit clamp to %ddBm.\n", power);
1622 il->tx_power_user_lmt = power;
1623
1624 /* set up new Tx powers for each and every channel, 2.4 and 5.x */
1625
1626 for (i = 0; i < il->channel_count; i++) {
1627 ch_info = &il->channel_info[i];
1628 a_band = il_is_channel_a_band(ch_info);
1629
1630 /* find minimum power of all user and regulatory constraints
1631 * (does not consider h/w clipping limitations) */
1632 max_power = il3945_hw_reg_get_ch_txpower_limit(ch_info);
1633 max_power = min(power, max_power);
1634 if (max_power != ch_info->curr_txpow) {
1635 ch_info->curr_txpow = max_power;
1636
1637 /* this considers the h/w clipping limitations */
1638 il3945_hw_reg_set_new_power(il, ch_info);
1639 }
1640 }
1641
1642 /* update txpower settings for all channels,
1643 * send to NIC if associated. */
1644 il3945_is_temp_calib_needed(il);
1645 il3945_hw_reg_comp_txpower_temp(il);
1646
1647 return 0;
1648}
1649
1650static int
1651il3945_send_rxon_assoc(struct il_priv *il)
1652{
1653 int rc = 0;
1654 struct il_rx_pkt *pkt;
1655 struct il3945_rxon_assoc_cmd rxon_assoc;
1656 struct il_host_cmd cmd = {
1657 .id = C_RXON_ASSOC,
1658 .len = sizeof(rxon_assoc),
1659 .flags = CMD_WANT_SKB,
1660 .data = &rxon_assoc,
1661 };
1662 const struct il_rxon_cmd *rxon1 = &il->staging;
1663 const struct il_rxon_cmd *rxon2 = &il->active;
1664
1665 if (rxon1->flags == rxon2->flags &&
1666 rxon1->filter_flags == rxon2->filter_flags &&
1667 rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
1668 rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
1669 D_INFO("Using current RXON_ASSOC. Not resending.\n");
1670 return 0;
1671 }
1672
1673 rxon_assoc.flags = il->staging.flags;
1674 rxon_assoc.filter_flags = il->staging.filter_flags;
1675 rxon_assoc.ofdm_basic_rates = il->staging.ofdm_basic_rates;
1676 rxon_assoc.cck_basic_rates = il->staging.cck_basic_rates;
1677 rxon_assoc.reserved = 0;
1678
1679 rc = il_send_cmd_sync(il, &cmd);
1680 if (rc)
1681 return rc;
1682
1683 pkt = (struct il_rx_pkt *)cmd.reply_page;
1684 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
1685 IL_ERR("Bad return from C_RXON_ASSOC command\n");
1686 rc = -EIO;
1687 }
1688
1689 il_free_pages(il, cmd.reply_page);
1690
1691 return rc;
1692}
1693
1694/**
1695 * il3945_commit_rxon - commit staging_rxon to hardware
1696 *
1697 * The RXON command in staging_rxon is committed to the hardware and
1698 * the active_rxon structure is updated with the new data. This
1699 * function correctly transitions out of the RXON_ASSOC_MSK state if
1700 * a HW tune is required based on the RXON structure changes.
1701 */
1702int
1703il3945_commit_rxon(struct il_priv *il)
1704{
1705 /* cast away the const for active_rxon in this function */
1706 struct il3945_rxon_cmd *active_rxon = (void *)&il->active;
1707 struct il3945_rxon_cmd *staging_rxon = (void *)&il->staging;
1708 int rc = 0;
1709 bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
1710
1711 if (test_bit(S_EXIT_PENDING, &il->status))
1712 return -EINVAL;
1713
1714 if (!il_is_alive(il))
1715 return -1;
1716
1717 /* always get timestamp with Rx frame */
1718 staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
1719
1720 /* select antenna */
1721 staging_rxon->flags &= ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
1722 staging_rxon->flags |= il3945_get_antenna_flags(il);
1723
1724 rc = il_check_rxon_cmd(il);
1725 if (rc) {
1726 IL_ERR("Invalid RXON configuration. Not committing.\n");
1727 return -EINVAL;
1728 }
1729
1730 /* If we don't need to send a full RXON, we can use
1731 * il3945_rxon_assoc_cmd which is used to reconfigure filter
1732 * and other flags for the current radio configuration. */
1733 if (!il_full_rxon_required(il)) {
1734 rc = il_send_rxon_assoc(il);
1735 if (rc) {
1736 IL_ERR("Error setting RXON_ASSOC "
1737 "configuration (%d).\n", rc);
1738 return rc;
1739 }
1740
1741 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1742 /*
1743 * We do not commit tx power settings while channel changing,
1744 * do it now if tx power changed.
1745 */
1746 il_set_tx_power(il, il->tx_power_next, false);
1747 return 0;
1748 }
1749
1750 /* If we are currently associated and the new config requires
1751 * an RXON_ASSOC and the new config wants the associated mask enabled,
1752 * we must clear the associated from the active configuration
1753 * before we apply the new config */
1754 if (il_is_associated(il) && new_assoc) {
1755 D_INFO("Toggling associated bit on current RXON\n");
1756 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1757
1758 /*
1759 * reserved4 and 5 could have been filled by the iwlcore code.
1760 * Let's clear them before pushing to the 3945.
1761 */
1762 active_rxon->reserved4 = 0;
1763 active_rxon->reserved5 = 0;
1764 rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd),
1765 &il->active);
1766
1767 /* If the mask clearing failed then we set
1768 * active_rxon back to what it was previously */
1769 if (rc) {
1770 active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
1771 IL_ERR("Error clearing ASSOC_MSK on current "
1772 "configuration (%d).\n", rc);
1773 return rc;
1774 }
1775 il_clear_ucode_stations(il);
1776 il_restore_stations(il);
1777 }
1778
1779 D_INFO("Sending RXON\n" "* with%s RXON_FILTER_ASSOC_MSK\n"
1780 "* channel = %d\n" "* bssid = %pM\n", (new_assoc ? "" : "out"),
1781 le16_to_cpu(staging_rxon->channel), staging_rxon->bssid_addr);
1782
1783 /*
1784 * reserved4 and 5 could have been filled by the iwlcore code.
1785 * Let's clear them before pushing to the 3945.
1786 */
1787 staging_rxon->reserved4 = 0;
1788 staging_rxon->reserved5 = 0;
1789
1790 il_set_rxon_hwcrypto(il, !il3945_mod_params.sw_crypto);
1791
1792 /* Apply the new configuration */
1793 rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd),
1794 staging_rxon);
1795 if (rc) {
1796 IL_ERR("Error setting new configuration (%d).\n", rc);
1797 return rc;
1798 }
1799
1800 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1801
1802 if (!new_assoc) {
1803 il_clear_ucode_stations(il);
1804 il_restore_stations(il);
1805 }
1806
1807 /* If we issue a new RXON command which required a tune then we must
1808 * send a new TXPOWER command or we won't be able to Tx any frames */
1809 rc = il_set_tx_power(il, il->tx_power_next, true);
1810 if (rc) {
1811 IL_ERR("Error setting Tx power (%d).\n", rc);
1812 return rc;
1813 }
1814
1815 /* Init the hardware's rate fallback order based on the band */
1816 rc = il3945_init_hw_rate_table(il);
1817 if (rc) {
1818 IL_ERR("Error setting HW rate table: %02X\n", rc);
1819 return -EIO;
1820 }
1821
1822 return 0;
1823}
1824
1825/**
1826 * il3945_reg_txpower_periodic - called when time to check our temperature.
1827 *
1828 * -- reset periodic timer
1829 * -- see if temp has changed enough to warrant re-calibration ... if so:
1830 * -- correct coeffs for temp (can reset temp timer)
1831 * -- save this temp as "last",
1832 * -- send new set of gain settings to NIC
1833 * NOTE: This should continue working, even when we're not associated,
1834 * so we can keep our internal table of scan powers current. */
1835void
1836il3945_reg_txpower_periodic(struct il_priv *il)
1837{
1838 /* This will kick in the "brute force"
1839 * il3945_hw_reg_comp_txpower_temp() below */
1840 if (!il3945_is_temp_calib_needed(il))
1841 goto reschedule;
1842
1843 /* Set up a new set of temp-adjusted TxPowers, send to NIC.
1844 * This is based *only* on current temperature,
1845 * ignoring any previous power measurements */
1846 il3945_hw_reg_comp_txpower_temp(il);
1847
1848reschedule:
1849 queue_delayed_work(il->workqueue, &il->_3945.thermal_periodic,
1850 REG_RECALIB_PERIOD * HZ);
1851}
1852
1853static void
1854il3945_bg_reg_txpower_periodic(struct work_struct *work)
1855{
1856 struct il_priv *il = container_of(work, struct il_priv,
1857 _3945.thermal_periodic.work);
1858
1859 mutex_lock(&il->mutex);
1860 if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL)
1861 goto out;
1862
1863 il3945_reg_txpower_periodic(il);
1864out:
1865 mutex_unlock(&il->mutex);
1866}
1867
1868/**
1869 * il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4) for channel.
1870 *
1871 * This function is used when initializing channel-info structs.
1872 *
1873 * NOTE: These channel groups do *NOT* match the bands above!
1874 * These channel groups are based on factory-tested channels;
1875 * on A-band, EEPROM's "group frequency" entries represent the top
1876 * channel in each group 1-4. Group 5 All B/G channels are in group 0.
1877 */
1878static u16
1879il3945_hw_reg_get_ch_grp_idx(struct il_priv *il,
1880 const struct il_channel_info *ch_info)
1881{
1882 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1883 struct il3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
1884 u8 group;
1885 u16 group_idx = 0; /* based on factory calib frequencies */
1886 u8 grp_channel;
1887
1888 /* Find the group idx for the channel ... don't use idx 1(?) */
1889 if (il_is_channel_a_band(ch_info)) {
1890 for (group = 1; group < 5; group++) {
1891 grp_channel = ch_grp[group].group_channel;
1892 if (ch_info->channel <= grp_channel) {
1893 group_idx = group;
1894 break;
1895 }
1896 }
1897 /* group 4 has a few channels *above* its factory cal freq */
1898 if (group == 5)
1899 group_idx = 4;
1900 } else
1901 group_idx = 0; /* 2.4 GHz, group 0 */
1902
1903 D_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, group_idx);
1904 return group_idx;
1905}
1906
1907/**
1908 * il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx
1909 *
1910 * Interpolate to get nominal (i.e. at factory calibration temperature) idx
1911 * into radio/DSP gain settings table for requested power.
1912 */
1913static int
1914il3945_hw_reg_get_matched_power_idx(struct il_priv *il, s8 requested_power,
1915 s32 setting_idx, s32 *new_idx)
1916{
1917 const struct il3945_eeprom_txpower_group *chnl_grp = NULL;
1918 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1919 s32 idx0, idx1;
1920 s32 power = 2 * requested_power;
1921 s32 i;
1922 const struct il3945_eeprom_txpower_sample *samples;
1923 s32 gains0, gains1;
1924 s32 res;
1925 s32 denominator;
1926
1927 chnl_grp = &eeprom->groups[setting_idx];
1928 samples = chnl_grp->samples;
1929 for (i = 0; i < 5; i++) {
1930 if (power == samples[i].power) {
1931 *new_idx = samples[i].gain_idx;
1932 return 0;
1933 }
1934 }
1935
1936 if (power > samples[1].power) {
1937 idx0 = 0;
1938 idx1 = 1;
1939 } else if (power > samples[2].power) {
1940 idx0 = 1;
1941 idx1 = 2;
1942 } else if (power > samples[3].power) {
1943 idx0 = 2;
1944 idx1 = 3;
1945 } else {
1946 idx0 = 3;
1947 idx1 = 4;
1948 }
1949
1950 denominator = (s32) samples[idx1].power - (s32) samples[idx0].power;
1951 if (denominator == 0)
1952 return -EINVAL;
1953 gains0 = (s32) samples[idx0].gain_idx * (1 << 19);
1954 gains1 = (s32) samples[idx1].gain_idx * (1 << 19);
1955 res =
1956 gains0 + (gains1 - gains0) * ((s32) power -
1957 (s32) samples[idx0].power) /
1958 denominator + (1 << 18);
1959 *new_idx = res >> 19;
1960 return 0;
1961}
1962
1963static void
1964il3945_hw_reg_init_channel_groups(struct il_priv *il)
1965{
1966 u32 i;
1967 s32 rate_idx;
1968 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1969 const struct il3945_eeprom_txpower_group *group;
1970
1971 D_POWER("Initializing factory calib info from EEPROM\n");
1972
1973 for (i = 0; i < IL_NUM_TX_CALIB_GROUPS; i++) {
1974 s8 *clip_pwrs; /* table of power levels for each rate */
1975 s8 satur_pwr; /* saturation power for each chnl group */
1976 group = &eeprom->groups[i];
1977
1978 /* sanity check on factory saturation power value */
1979 if (group->saturation_power < 40) {
1980 IL_WARN("Error: saturation power is %d, "
1981 "less than minimum expected 40\n",
1982 group->saturation_power);
1983 return;
1984 }
1985
1986 /*
1987 * Derive requested power levels for each rate, based on
1988 * hardware capabilities (saturation power for band).
1989 * Basic value is 3dB down from saturation, with further
1990 * power reductions for highest 3 data rates. These
1991 * backoffs provide headroom for high rate modulation
1992 * power peaks, without too much distortion (clipping).
1993 */
1994 /* we'll fill in this array with h/w max power levels */
1995 clip_pwrs = (s8 *) il->_3945.clip_groups[i].clip_powers;
1996
1997 /* divide factory saturation power by 2 to find -3dB level */
1998 satur_pwr = (s8) (group->saturation_power >> 1);
1999
2000 /* fill in channel group's nominal powers for each rate */
2001 for (rate_idx = 0; rate_idx < RATE_COUNT_3945;
2002 rate_idx++, clip_pwrs++) {
2003 switch (rate_idx) {
2004 case RATE_36M_IDX_TBL:
2005 if (i == 0) /* B/G */
2006 *clip_pwrs = satur_pwr;
2007 else /* A */
2008 *clip_pwrs = satur_pwr - 5;
2009 break;
2010 case RATE_48M_IDX_TBL:
2011 if (i == 0)
2012 *clip_pwrs = satur_pwr - 7;
2013 else
2014 *clip_pwrs = satur_pwr - 10;
2015 break;
2016 case RATE_54M_IDX_TBL:
2017 if (i == 0)
2018 *clip_pwrs = satur_pwr - 9;
2019 else
2020 *clip_pwrs = satur_pwr - 12;
2021 break;
2022 default:
2023 *clip_pwrs = satur_pwr;
2024 break;
2025 }
2026 }
2027 }
2028}
2029
2030/**
2031 * il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
2032 *
2033 * Second pass (during init) to set up il->channel_info
2034 *
2035 * Set up Tx-power settings in our channel info database for each VALID
2036 * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
2037 * and current temperature.
2038 *
2039 * Since this is based on current temperature (at init time), these values may
2040 * not be valid for very long, but it gives us a starting/default point,
2041 * and allows us to active (i.e. using Tx) scan.
2042 *
2043 * This does *not* write values to NIC, just sets up our internal table.
2044 */
2045int
2046il3945_txpower_set_from_eeprom(struct il_priv *il)
2047{
2048 struct il_channel_info *ch_info = NULL;
2049 struct il3945_channel_power_info *pwr_info;
2050 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
2051 int delta_idx;
2052 u8 rate_idx;
2053 u8 scan_tbl_idx;
2054 const s8 *clip_pwrs; /* array of power levels for each rate */
2055 u8 gain, dsp_atten;
2056 s8 power;
2057 u8 pwr_idx, base_pwr_idx, a_band;
2058 u8 i;
2059 int temperature;
2060
2061 /* save temperature reference,
2062 * so we can determine next time to calibrate */
2063 temperature = il3945_hw_reg_txpower_get_temperature(il);
2064 il->last_temperature = temperature;
2065
2066 il3945_hw_reg_init_channel_groups(il);
2067
2068 /* initialize Tx power info for each and every channel, 2.4 and 5.x */
2069 for (i = 0, ch_info = il->channel_info; i < il->channel_count;
2070 i++, ch_info++) {
2071 a_band = il_is_channel_a_band(ch_info);
2072 if (!il_is_channel_valid(ch_info))
2073 continue;
2074
2075 /* find this channel's channel group (*not* "band") idx */
2076 ch_info->group_idx = il3945_hw_reg_get_ch_grp_idx(il, ch_info);
2077
2078 /* Get this chnlgrp's rate->max/clip-powers table */
2079 clip_pwrs =
2080 il->_3945.clip_groups[ch_info->group_idx].clip_powers;
2081
2082 /* calculate power idx *adjustment* value according to
2083 * diff between current temperature and factory temperature */
2084 delta_idx =
2085 il3945_hw_reg_adjust_power_by_temp(temperature,
2086 eeprom->groups[ch_info->
2087 group_idx].
2088 temperature);
2089
2090 D_POWER("Delta idx for channel %d: %d [%d]\n", ch_info->channel,
2091 delta_idx, temperature + IL_TEMP_CONVERT);
2092
2093 /* set tx power value for all OFDM rates */
2094 for (rate_idx = 0; rate_idx < IL_OFDM_RATES; rate_idx++) {
2095 s32 uninitialized_var(power_idx);
2096 int rc;
2097
2098 /* use channel group's clip-power table,
2099 * but don't exceed channel's max power */
2100 s8 pwr = min(ch_info->max_power_avg,
2101 clip_pwrs[rate_idx]);
2102
2103 pwr_info = &ch_info->power_info[rate_idx];
2104
2105 /* get base (i.e. at factory-measured temperature)
2106 * power table idx for this rate's power */
2107 rc = il3945_hw_reg_get_matched_power_idx(il, pwr,
2108 ch_info->
2109 group_idx,
2110 &power_idx);
2111 if (rc) {
2112 IL_ERR("Invalid power idx\n");
2113 return rc;
2114 }
2115 pwr_info->base_power_idx = (u8) power_idx;
2116
2117 /* temperature compensate */
2118 power_idx += delta_idx;
2119
2120 /* stay within range of gain table */
2121 power_idx = il3945_hw_reg_fix_power_idx(power_idx);
2122
2123 /* fill 1 OFDM rate's il3945_channel_power_info struct */
2124 pwr_info->requested_power = pwr;
2125 pwr_info->power_table_idx = (u8) power_idx;
2126 pwr_info->tpc.tx_gain =
2127 power_gain_table[a_band][power_idx].tx_gain;
2128 pwr_info->tpc.dsp_atten =
2129 power_gain_table[a_band][power_idx].dsp_atten;
2130 }
2131
2132 /* set tx power for CCK rates, based on OFDM 12 Mbit settings */
2133 pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL];
2134 power = pwr_info->requested_power + IL_CCK_FROM_OFDM_POWER_DIFF;
2135 pwr_idx = pwr_info->power_table_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
2136 base_pwr_idx =
2137 pwr_info->base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
2138
2139 /* stay within table range */
2140 pwr_idx = il3945_hw_reg_fix_power_idx(pwr_idx);
2141 gain = power_gain_table[a_band][pwr_idx].tx_gain;
2142 dsp_atten = power_gain_table[a_band][pwr_idx].dsp_atten;
2143
2144 /* fill each CCK rate's il3945_channel_power_info structure
2145 * NOTE: All CCK-rate Txpwrs are the same for a given chnl!
2146 * NOTE: CCK rates start at end of OFDM rates! */
2147 for (rate_idx = 0; rate_idx < IL_CCK_RATES; rate_idx++) {
2148 pwr_info =
2149 &ch_info->power_info[rate_idx + IL_OFDM_RATES];
2150 pwr_info->requested_power = power;
2151 pwr_info->power_table_idx = pwr_idx;
2152 pwr_info->base_power_idx = base_pwr_idx;
2153 pwr_info->tpc.tx_gain = gain;
2154 pwr_info->tpc.dsp_atten = dsp_atten;
2155 }
2156
2157 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
2158 for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES;
2159 scan_tbl_idx++) {
2160 s32 actual_idx =
2161 (scan_tbl_idx ==
2162 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
2163 il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
2164 actual_idx, clip_pwrs,
2165 ch_info, a_band);
2166 }
2167 }
2168
2169 return 0;
2170}
2171
2172int
2173il3945_hw_rxq_stop(struct il_priv *il)
2174{
2175 int ret;
2176
2177 _il_wr(il, FH39_RCSR_CONFIG(0), 0);
2178 ret = _il_poll_bit(il, FH39_RSSR_STATUS,
2179 FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
2180 FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
2181 1000);
2182 if (ret < 0)
2183 IL_ERR("Can't stop Rx DMA.\n");
2184
2185 return 0;
2186}
2187
2188int
2189il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq)
2190{
2191 int txq_id = txq->q.id;
2192
2193 struct il3945_shared *shared_data = il->_3945.shared_virt;
2194
2195 shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32) txq->q.dma_addr);
2196
2197 il_wr(il, FH39_CBCC_CTRL(txq_id), 0);
2198 il_wr(il, FH39_CBCC_BASE(txq_id), 0);
2199
2200 il_wr(il, FH39_TCSR_CONFIG(txq_id),
2201 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
2202 FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
2203 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
2204 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
2205 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
2206
2207 /* fake read to flush all prev. writes */
2208 _il_rd(il, FH39_TSSR_CBB_BASE);
2209
2210 return 0;
2211}
2212
2213/*
2214 * HCMD utils
2215 */
2216static u16
2217il3945_get_hcmd_size(u8 cmd_id, u16 len)
2218{
2219 switch (cmd_id) {
2220 case C_RXON:
2221 return sizeof(struct il3945_rxon_cmd);
2222 case C_POWER_TBL:
2223 return sizeof(struct il3945_powertable_cmd);
2224 default:
2225 return len;
2226 }
2227}
2228
2229static u16
2230il3945_build_addsta_hcmd(const struct il_addsta_cmd *cmd, u8 * data)
2231{
2232 struct il3945_addsta_cmd *addsta = (struct il3945_addsta_cmd *)data;
2233 addsta->mode = cmd->mode;
2234 memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
2235 memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo));
2236 addsta->station_flags = cmd->station_flags;
2237 addsta->station_flags_msk = cmd->station_flags_msk;
2238 addsta->tid_disable_tx = cpu_to_le16(0);
2239 addsta->rate_n_flags = cmd->rate_n_flags;
2240 addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
2241 addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
2242 addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
2243
2244 return (u16) sizeof(struct il3945_addsta_cmd);
2245}
2246
2247static int
2248il3945_add_bssid_station(struct il_priv *il, const u8 * addr, u8 * sta_id_r)
2249{
2250 int ret;
2251 u8 sta_id;
2252 unsigned long flags;
2253
2254 if (sta_id_r)
2255 *sta_id_r = IL_INVALID_STATION;
2256
2257 ret = il_add_station_common(il, addr, 0, NULL, &sta_id);
2258 if (ret) {
2259 IL_ERR("Unable to add station %pM\n", addr);
2260 return ret;
2261 }
2262
2263 if (sta_id_r)
2264 *sta_id_r = sta_id;
2265
2266 spin_lock_irqsave(&il->sta_lock, flags);
2267 il->stations[sta_id].used |= IL_STA_LOCAL;
2268 spin_unlock_irqrestore(&il->sta_lock, flags);
2269
2270 return 0;
2271}
2272
2273static int
2274il3945_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif,
2275 bool add)
2276{
2277 struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
2278 int ret;
2279
2280 if (add) {
2281 ret =
2282 il3945_add_bssid_station(il, vif->bss_conf.bssid,
2283 &vif_priv->ibss_bssid_sta_id);
2284 if (ret)
2285 return ret;
2286
2287 il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id,
2288 (il->band ==
2289 IEEE80211_BAND_5GHZ) ? RATE_6M_PLCP :
2290 RATE_1M_PLCP);
2291 il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id);
2292
2293 return 0;
2294 }
2295
2296 return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
2297 vif->bss_conf.bssid);
2298}
2299
2300/**
2301 * il3945_init_hw_rate_table - Initialize the hardware rate fallback table
2302 */
2303int
2304il3945_init_hw_rate_table(struct il_priv *il)
2305{
2306 int rc, i, idx, prev_idx;
2307 struct il3945_rate_scaling_cmd rate_cmd = {
2308 .reserved = {0, 0, 0},
2309 };
2310 struct il3945_rate_scaling_info *table = rate_cmd.table;
2311
2312 for (i = 0; i < ARRAY_SIZE(il3945_rates); i++) {
2313 idx = il3945_rates[i].table_rs_idx;
2314
2315 table[idx].rate_n_flags = cpu_to_le16(il3945_rates[i].plcp);
2316 table[idx].try_cnt = il->retry_rate;
2317 prev_idx = il3945_get_prev_ieee_rate(i);
2318 table[idx].next_rate_idx = il3945_rates[prev_idx].table_rs_idx;
2319 }
2320
2321 switch (il->band) {
2322 case IEEE80211_BAND_5GHZ:
2323 D_RATE("Select A mode rate scale\n");
2324 /* If one of the following CCK rates is used,
2325 * have it fall back to the 6M OFDM rate */
2326 for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++)
2327 table[i].next_rate_idx =
2328 il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
2329
2330 /* Don't fall back to CCK rates */
2331 table[RATE_12M_IDX_TBL].next_rate_idx = RATE_9M_IDX_TBL;
2332
2333 /* Don't drop out of OFDM rates */
2334 table[RATE_6M_IDX_TBL].next_rate_idx =
2335 il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
2336 break;
2337
2338 case IEEE80211_BAND_2GHZ:
2339 D_RATE("Select B/G mode rate scale\n");
2340 /* If an OFDM rate is used, have it fall back to the
2341 * 1M CCK rates */
2342
2343 if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
2344 il_is_associated(il)) {
2345
2346 idx = IL_FIRST_CCK_RATE;
2347 for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++)
2348 table[i].next_rate_idx =
2349 il3945_rates[idx].table_rs_idx;
2350
2351 idx = RATE_11M_IDX_TBL;
2352 /* CCK shouldn't fall back to OFDM... */
2353 table[idx].next_rate_idx = RATE_5M_IDX_TBL;
2354 }
2355 break;
2356
2357 default:
2358 WARN_ON(1);
2359 break;
2360 }
2361
2362 /* Update the rate scaling for control frame Tx */
2363 rate_cmd.table_id = 0;
2364 rc = il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd);
2365 if (rc)
2366 return rc;
2367
2368 /* Update the rate scaling for data frame Tx */
2369 rate_cmd.table_id = 1;
2370 return il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd);
2371}
2372
2373/* Called when initializing driver */
2374int
2375il3945_hw_set_hw_params(struct il_priv *il)
2376{
2377 memset((void *)&il->hw_params, 0, sizeof(struct il_hw_params));
2378
2379 il->_3945.shared_virt =
2380 dma_alloc_coherent(&il->pci_dev->dev, sizeof(struct il3945_shared),
2381 &il->_3945.shared_phys, GFP_KERNEL);
2382 if (!il->_3945.shared_virt) {
2383 IL_ERR("failed to allocate pci memory\n");
2384 return -ENOMEM;
2385 }
2386
2387 il->hw_params.bcast_id = IL3945_BROADCAST_ID;
2388
2389 /* Assign number of Usable TX queues */
2390 il->hw_params.max_txq_num = il->cfg->num_of_queues;
2391
2392 il->hw_params.tfd_size = sizeof(struct il3945_tfd);
2393 il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K);
2394 il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
2395 il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
2396 il->hw_params.max_stations = IL3945_STATION_COUNT;
2397
2398 il->sta_key_max_num = STA_KEY_MAX_NUM;
2399
2400 il->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
2401 il->hw_params.max_beacon_itrvl = IL39_MAX_UCODE_BEACON_INTERVAL;
2402 il->hw_params.beacon_time_tsf_bits = IL3945_EXT_BEACON_TIME_POS;
2403
2404 return 0;
2405}
2406
2407unsigned int
2408il3945_hw_get_beacon_cmd(struct il_priv *il, struct il3945_frame *frame,
2409 u8 rate)
2410{
2411 struct il3945_tx_beacon_cmd *tx_beacon_cmd;
2412 unsigned int frame_size;
2413
2414 tx_beacon_cmd = (struct il3945_tx_beacon_cmd *)&frame->u;
2415 memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
2416
2417 tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id;
2418 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2419
2420 frame_size =
2421 il3945_fill_beacon_frame(il, tx_beacon_cmd->frame,
2422 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
2423
2424 BUG_ON(frame_size > MAX_MPDU_SIZE);
2425 tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size);
2426
2427 tx_beacon_cmd->tx.rate = rate;
2428 tx_beacon_cmd->tx.tx_flags =
2429 (TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK);
2430
2431 /* supp_rates[0] == OFDM start at IL_FIRST_OFDM_RATE */
2432 tx_beacon_cmd->tx.supp_rates[0] =
2433 (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF;
2434
2435 tx_beacon_cmd->tx.supp_rates[1] = (IL_CCK_BASIC_RATES_MASK & 0xF);
2436
2437 return sizeof(struct il3945_tx_beacon_cmd) + frame_size;
2438}
2439
2440void
2441il3945_hw_handler_setup(struct il_priv *il)
2442{
2443 il->handlers[C_TX] = il3945_hdl_tx;
2444 il->handlers[N_3945_RX] = il3945_hdl_rx;
2445}
2446
2447void
2448il3945_hw_setup_deferred_work(struct il_priv *il)
2449{
2450 INIT_DELAYED_WORK(&il->_3945.thermal_periodic,
2451 il3945_bg_reg_txpower_periodic);
2452}
2453
2454void
2455il3945_hw_cancel_deferred_work(struct il_priv *il)
2456{
2457 cancel_delayed_work(&il->_3945.thermal_periodic);
2458}
2459
2460/* check contents of special bootstrap uCode SRAM */
2461static int
2462il3945_verify_bsm(struct il_priv *il)
2463{
2464 __le32 *image = il->ucode_boot.v_addr;
2465 u32 len = il->ucode_boot.len;
2466 u32 reg;
2467 u32 val;
2468
2469 D_INFO("Begin verify bsm\n");
2470
2471 /* verify BSM SRAM contents */
2472 val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
2473 for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len;
2474 reg += sizeof(u32), image++) {
2475 val = il_rd_prph(il, reg);
2476 if (val != le32_to_cpu(*image)) {
2477 IL_ERR("BSM uCode verification failed at "
2478 "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
2479 BSM_SRAM_LOWER_BOUND, reg - BSM_SRAM_LOWER_BOUND,
2480 len, val, le32_to_cpu(*image));
2481 return -EIO;
2482 }
2483 }
2484
2485 D_INFO("BSM bootstrap uCode image OK\n");
2486
2487 return 0;
2488}
2489
2490/******************************************************************************
2491 *
2492 * EEPROM related functions
2493 *
2494 ******************************************************************************/
2495
2496/*
2497 * Clear the OWNER_MSK, to establish driver (instead of uCode running on
2498 * embedded controller) as EEPROM reader; each read is a series of pulses
2499 * to/from the EEPROM chip, not a single event, so even reads could conflict
2500 * if they weren't arbitrated by some ownership mechanism. Here, the driver
2501 * simply claims ownership, which should be safe when this function is called
2502 * (i.e. before loading uCode!).
2503 */
2504static int
2505il3945_eeprom_acquire_semaphore(struct il_priv *il)
2506{
2507 _il_clear_bit(il, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
2508 return 0;
2509}
2510
2511static void
2512il3945_eeprom_release_semaphore(struct il_priv *il)
2513{
2514 return;
2515}
2516
2517 /**
2518 * il3945_load_bsm - Load bootstrap instructions
2519 *
2520 * BSM operation:
2521 *
2522 * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
2523 * in special SRAM that does not power down during RFKILL. When powering back
2524 * up after power-saving sleeps (or during initial uCode load), the BSM loads
2525 * the bootstrap program into the on-board processor, and starts it.
2526 *
2527 * The bootstrap program loads (via DMA) instructions and data for a new
2528 * program from host DRAM locations indicated by the host driver in the
2529 * BSM_DRAM_* registers. Once the new program is loaded, it starts
2530 * automatically.
2531 *
2532 * When initializing the NIC, the host driver points the BSM to the
2533 * "initialize" uCode image. This uCode sets up some internal data, then
2534 * notifies host via "initialize alive" that it is complete.
2535 *
2536 * The host then replaces the BSM_DRAM_* pointer values to point to the
2537 * normal runtime uCode instructions and a backup uCode data cache buffer
2538 * (filled initially with starting data values for the on-board processor),
2539 * then triggers the "initialize" uCode to load and launch the runtime uCode,
2540 * which begins normal operation.
2541 *
2542 * When doing a power-save shutdown, runtime uCode saves data SRAM into
2543 * the backup data cache in DRAM before SRAM is powered down.
2544 *
2545 * When powering back up, the BSM loads the bootstrap program. This reloads
2546 * the runtime uCode instructions and the backup data cache into SRAM,
2547 * and re-launches the runtime uCode from where it left off.
2548 */
2549static int
2550il3945_load_bsm(struct il_priv *il)
2551{
2552 __le32 *image = il->ucode_boot.v_addr;
2553 u32 len = il->ucode_boot.len;
2554 dma_addr_t pinst;
2555 dma_addr_t pdata;
2556 u32 inst_len;
2557 u32 data_len;
2558 int rc;
2559 int i;
2560 u32 done;
2561 u32 reg_offset;
2562
2563 D_INFO("Begin load bsm\n");
2564
2565 /* make sure bootstrap program is no larger than BSM's SRAM size */
2566 if (len > IL39_MAX_BSM_SIZE)
2567 return -EINVAL;
2568
2569 /* Tell bootstrap uCode where to find the "Initialize" uCode
2570 * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
2571 * NOTE: il3945_initialize_alive_start() will replace these values,
2572 * after the "initialize" uCode has run, to point to
2573 * runtime/protocol instructions and backup data cache. */
2574 pinst = il->ucode_init.p_addr;
2575 pdata = il->ucode_init_data.p_addr;
2576 inst_len = il->ucode_init.len;
2577 data_len = il->ucode_init_data.len;
2578
2579 il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
2580 il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
2581 il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
2582 il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
2583
2584 /* Fill BSM memory with bootstrap instructions */
2585 for (reg_offset = BSM_SRAM_LOWER_BOUND;
2586 reg_offset < BSM_SRAM_LOWER_BOUND + len;
2587 reg_offset += sizeof(u32), image++)
2588 _il_wr_prph(il, reg_offset, le32_to_cpu(*image));
2589
2590 rc = il3945_verify_bsm(il);
2591 if (rc)
2592 return rc;
2593
2594 /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
2595 il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
2596 il_wr_prph(il, BSM_WR_MEM_DST_REG, IL39_RTC_INST_LOWER_BOUND);
2597 il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
2598
2599 /* Load bootstrap code into instruction SRAM now,
2600 * to prepare to load "initialize" uCode */
2601 il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
2602
2603 /* Wait for load of bootstrap uCode to finish */
2604 for (i = 0; i < 100; i++) {
2605 done = il_rd_prph(il, BSM_WR_CTRL_REG);
2606 if (!(done & BSM_WR_CTRL_REG_BIT_START))
2607 break;
2608 udelay(10);
2609 }
2610 if (i < 100)
2611 D_INFO("BSM write complete, poll %d iterations\n", i);
2612 else {
2613 IL_ERR("BSM write did not complete!\n");
2614 return -EIO;
2615 }
2616
2617 /* Enable future boot loads whenever power management unit triggers it
2618 * (e.g. when powering back up after power-save shutdown) */
2619 il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
2620
2621 return 0;
2622}
2623
2624const struct il_ops il3945_ops = {
2625 .txq_attach_buf_to_tfd = il3945_hw_txq_attach_buf_to_tfd,
2626 .txq_free_tfd = il3945_hw_txq_free_tfd,
2627 .txq_init = il3945_hw_tx_queue_init,
2628 .load_ucode = il3945_load_bsm,
2629 .dump_nic_error_log = il3945_dump_nic_error_log,
2630 .apm_init = il3945_apm_init,
2631 .send_tx_power = il3945_send_tx_power,
2632 .is_valid_rtc_data_addr = il3945_hw_valid_rtc_data_addr,
2633 .eeprom_acquire_semaphore = il3945_eeprom_acquire_semaphore,
2634 .eeprom_release_semaphore = il3945_eeprom_release_semaphore,
2635
2636 .rxon_assoc = il3945_send_rxon_assoc,
2637 .commit_rxon = il3945_commit_rxon,
2638
2639 .get_hcmd_size = il3945_get_hcmd_size,
2640 .build_addsta_hcmd = il3945_build_addsta_hcmd,
2641 .request_scan = il3945_request_scan,
2642 .post_scan = il3945_post_scan,
2643
2644 .post_associate = il3945_post_associate,
2645 .config_ap = il3945_config_ap,
2646 .manage_ibss_station = il3945_manage_ibss_station,
2647
2648 .send_led_cmd = il3945_send_led_cmd,
2649};
2650
2651static struct il_cfg il3945_bg_cfg = {
2652 .name = "3945BG",
2653 .fw_name_pre = IL3945_FW_PRE,
2654 .ucode_api_max = IL3945_UCODE_API_MAX,
2655 .ucode_api_min = IL3945_UCODE_API_MIN,
2656 .sku = IL_SKU_G,
2657 .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2658 .mod_params = &il3945_mod_params,
2659 .led_mode = IL_LED_BLINK,
2660
2661 .eeprom_size = IL3945_EEPROM_IMG_SIZE,
2662 .num_of_queues = IL39_NUM_QUEUES,
2663 .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
2664 .set_l0s = false,
2665 .use_bsm = true,
2666 .led_compensation = 64,
2667 .wd_timeout = IL_DEF_WD_TIMEOUT,
2668
2669 .regulatory_bands = {
2670 EEPROM_REGULATORY_BAND_1_CHANNELS,
2671 EEPROM_REGULATORY_BAND_2_CHANNELS,
2672 EEPROM_REGULATORY_BAND_3_CHANNELS,
2673 EEPROM_REGULATORY_BAND_4_CHANNELS,
2674 EEPROM_REGULATORY_BAND_5_CHANNELS,
2675 EEPROM_REGULATORY_BAND_NO_HT40,
2676 EEPROM_REGULATORY_BAND_NO_HT40,
2677 },
2678};
2679
2680static struct il_cfg il3945_abg_cfg = {
2681 .name = "3945ABG",
2682 .fw_name_pre = IL3945_FW_PRE,
2683 .ucode_api_max = IL3945_UCODE_API_MAX,
2684 .ucode_api_min = IL3945_UCODE_API_MIN,
2685 .sku = IL_SKU_A | IL_SKU_G,
2686 .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2687 .mod_params = &il3945_mod_params,
2688 .led_mode = IL_LED_BLINK,
2689
2690 .eeprom_size = IL3945_EEPROM_IMG_SIZE,
2691 .num_of_queues = IL39_NUM_QUEUES,
2692 .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
2693 .set_l0s = false,
2694 .use_bsm = true,
2695 .led_compensation = 64,
2696 .wd_timeout = IL_DEF_WD_TIMEOUT,
2697
2698 .regulatory_bands = {
2699 EEPROM_REGULATORY_BAND_1_CHANNELS,
2700 EEPROM_REGULATORY_BAND_2_CHANNELS,
2701 EEPROM_REGULATORY_BAND_3_CHANNELS,
2702 EEPROM_REGULATORY_BAND_4_CHANNELS,
2703 EEPROM_REGULATORY_BAND_5_CHANNELS,
2704 EEPROM_REGULATORY_BAND_NO_HT40,
2705 EEPROM_REGULATORY_BAND_NO_HT40,
2706 },
2707};
2708
2709DEFINE_PCI_DEVICE_TABLE(il3945_hw_card_ids) = {
2710 {IL_PCI_DEVICE(0x4222, 0x1005, il3945_bg_cfg)},
2711 {IL_PCI_DEVICE(0x4222, 0x1034, il3945_bg_cfg)},
2712 {IL_PCI_DEVICE(0x4222, 0x1044, il3945_bg_cfg)},
2713 {IL_PCI_DEVICE(0x4227, 0x1014, il3945_bg_cfg)},
2714 {IL_PCI_DEVICE(0x4222, PCI_ANY_ID, il3945_abg_cfg)},
2715 {IL_PCI_DEVICE(0x4227, PCI_ANY_ID, il3945_abg_cfg)},
2716 {0}
2717};
2718
2719MODULE_DEVICE_TABLE(pci, il3945_hw_card_ids);