Loading...
1/*
2 * fschmd.c
3 *
4 * Copyright (C) 2007 - 2009 Hans de Goede <hdegoede@redhat.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 */
20
21/*
22 * Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes,
23 * Scylla, Heracles, Heimdall, Hades and Syleus chips
24 *
25 * Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6
26 * (candidate) fschmd drivers:
27 * Copyright (C) 2006 Thilo Cestonaro
28 * <thilo.cestonaro.external@fujitsu-siemens.com>
29 * Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
30 * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
31 * Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de>
32 * Copyright (C) 2000 Hermann Jung <hej@odn.de>
33 */
34
35#include <linux/module.h>
36#include <linux/init.h>
37#include <linux/slab.h>
38#include <linux/jiffies.h>
39#include <linux/i2c.h>
40#include <linux/hwmon.h>
41#include <linux/hwmon-sysfs.h>
42#include <linux/err.h>
43#include <linux/mutex.h>
44#include <linux/sysfs.h>
45#include <linux/dmi.h>
46#include <linux/fs.h>
47#include <linux/watchdog.h>
48#include <linux/miscdevice.h>
49#include <linux/uaccess.h>
50#include <linux/kref.h>
51
52/* Addresses to scan */
53static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
54
55/* Insmod parameters */
56static bool nowayout = WATCHDOG_NOWAYOUT;
57module_param(nowayout, bool, 0);
58MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
59 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
60
61enum chips { fscpos, fscher, fscscy, fschrc, fschmd, fschds, fscsyl };
62
63/*
64 * The FSCHMD registers and other defines
65 */
66
67/* chip identification */
68#define FSCHMD_REG_IDENT_0 0x00
69#define FSCHMD_REG_IDENT_1 0x01
70#define FSCHMD_REG_IDENT_2 0x02
71#define FSCHMD_REG_REVISION 0x03
72
73/* global control and status */
74#define FSCHMD_REG_EVENT_STATE 0x04
75#define FSCHMD_REG_CONTROL 0x05
76
77#define FSCHMD_CONTROL_ALERT_LED 0x01
78
79/* watchdog */
80static const u8 FSCHMD_REG_WDOG_CONTROL[7] = {
81 0x21, 0x21, 0x21, 0x21, 0x21, 0x28, 0x28 };
82static const u8 FSCHMD_REG_WDOG_STATE[7] = {
83 0x23, 0x23, 0x23, 0x23, 0x23, 0x29, 0x29 };
84static const u8 FSCHMD_REG_WDOG_PRESET[7] = {
85 0x28, 0x28, 0x28, 0x28, 0x28, 0x2a, 0x2a };
86
87#define FSCHMD_WDOG_CONTROL_TRIGGER 0x10
88#define FSCHMD_WDOG_CONTROL_STARTED 0x10 /* the same as trigger */
89#define FSCHMD_WDOG_CONTROL_STOP 0x20
90#define FSCHMD_WDOG_CONTROL_RESOLUTION 0x40
91
92#define FSCHMD_WDOG_STATE_CARDRESET 0x02
93
94/* voltages, weird order is to keep the same order as the old drivers */
95static const u8 FSCHMD_REG_VOLT[7][6] = {
96 { 0x45, 0x42, 0x48 }, /* pos */
97 { 0x45, 0x42, 0x48 }, /* her */
98 { 0x45, 0x42, 0x48 }, /* scy */
99 { 0x45, 0x42, 0x48 }, /* hrc */
100 { 0x45, 0x42, 0x48 }, /* hmd */
101 { 0x21, 0x20, 0x22 }, /* hds */
102 { 0x21, 0x20, 0x22, 0x23, 0x24, 0x25 }, /* syl */
103};
104
105static const int FSCHMD_NO_VOLT_SENSORS[7] = { 3, 3, 3, 3, 3, 3, 6 };
106
107/*
108 * minimum pwm at which the fan is driven (pwm can by increased depending on
109 * the temp. Notice that for the scy some fans share there minimum speed.
110 * Also notice that with the scy the sensor order is different than with the
111 * other chips, this order was in the 2.4 driver and kept for consistency.
112 */
113static const u8 FSCHMD_REG_FAN_MIN[7][7] = {
114 { 0x55, 0x65 }, /* pos */
115 { 0x55, 0x65, 0xb5 }, /* her */
116 { 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 }, /* scy */
117 { 0x55, 0x65, 0xa5, 0xb5 }, /* hrc */
118 { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hmd */
119 { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hds */
120 { 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb4 }, /* syl */
121};
122
123/* actual fan speed */
124static const u8 FSCHMD_REG_FAN_ACT[7][7] = {
125 { 0x0e, 0x6b, 0xab }, /* pos */
126 { 0x0e, 0x6b, 0xbb }, /* her */
127 { 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb }, /* scy */
128 { 0x0e, 0x6b, 0xab, 0xbb }, /* hrc */
129 { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hmd */
130 { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hds */
131 { 0x57, 0x67, 0x77, 0x87, 0x97, 0xa7, 0xb7 }, /* syl */
132};
133
134/* fan status registers */
135static const u8 FSCHMD_REG_FAN_STATE[7][7] = {
136 { 0x0d, 0x62, 0xa2 }, /* pos */
137 { 0x0d, 0x62, 0xb2 }, /* her */
138 { 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 }, /* scy */
139 { 0x0d, 0x62, 0xa2, 0xb2 }, /* hrc */
140 { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hmd */
141 { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hds */
142 { 0x50, 0x60, 0x70, 0x80, 0x90, 0xa0, 0xb0 }, /* syl */
143};
144
145/* fan ripple / divider registers */
146static const u8 FSCHMD_REG_FAN_RIPPLE[7][7] = {
147 { 0x0f, 0x6f, 0xaf }, /* pos */
148 { 0x0f, 0x6f, 0xbf }, /* her */
149 { 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf }, /* scy */
150 { 0x0f, 0x6f, 0xaf, 0xbf }, /* hrc */
151 { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hmd */
152 { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hds */
153 { 0x56, 0x66, 0x76, 0x86, 0x96, 0xa6, 0xb6 }, /* syl */
154};
155
156static const int FSCHMD_NO_FAN_SENSORS[7] = { 3, 3, 6, 4, 5, 5, 7 };
157
158/* Fan status register bitmasks */
159#define FSCHMD_FAN_ALARM 0x04 /* called fault by FSC! */
160#define FSCHMD_FAN_NOT_PRESENT 0x08
161#define FSCHMD_FAN_DISABLED 0x80
162
163
164/* actual temperature registers */
165static const u8 FSCHMD_REG_TEMP_ACT[7][11] = {
166 { 0x64, 0x32, 0x35 }, /* pos */
167 { 0x64, 0x32, 0x35 }, /* her */
168 { 0x64, 0xD0, 0x32, 0x35 }, /* scy */
169 { 0x64, 0x32, 0x35 }, /* hrc */
170 { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hmd */
171 { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hds */
172 { 0x58, 0x68, 0x78, 0x88, 0x98, 0xa8, /* syl */
173 0xb8, 0xc8, 0xd8, 0xe8, 0xf8 },
174};
175
176/* temperature state registers */
177static const u8 FSCHMD_REG_TEMP_STATE[7][11] = {
178 { 0x71, 0x81, 0x91 }, /* pos */
179 { 0x71, 0x81, 0x91 }, /* her */
180 { 0x71, 0xd1, 0x81, 0x91 }, /* scy */
181 { 0x71, 0x81, 0x91 }, /* hrc */
182 { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hmd */
183 { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hds */
184 { 0x59, 0x69, 0x79, 0x89, 0x99, 0xa9, /* syl */
185 0xb9, 0xc9, 0xd9, 0xe9, 0xf9 },
186};
187
188/*
189 * temperature high limit registers, FSC does not document these. Proven to be
190 * there with field testing on the fscher and fschrc, already supported / used
191 * in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers
192 * at these addresses, but doesn't want to confirm they are the same as with
193 * the fscher??
194 */
195static const u8 FSCHMD_REG_TEMP_LIMIT[7][11] = {
196 { 0, 0, 0 }, /* pos */
197 { 0x76, 0x86, 0x96 }, /* her */
198 { 0x76, 0xd6, 0x86, 0x96 }, /* scy */
199 { 0x76, 0x86, 0x96 }, /* hrc */
200 { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hmd */
201 { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hds */
202 { 0x5a, 0x6a, 0x7a, 0x8a, 0x9a, 0xaa, /* syl */
203 0xba, 0xca, 0xda, 0xea, 0xfa },
204};
205
206/*
207 * These were found through experimenting with an fscher, currently they are
208 * not used, but we keep them around for future reference.
209 * On the fscsyl AUTOP1 lives at 0x#c (so 0x5c for fan1, 0x6c for fan2, etc),
210 * AUTOP2 lives at 0x#e, and 0x#1 is a bitmask defining which temps influence
211 * the fan speed.
212 * static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 };
213 * static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 };
214 */
215
216static const int FSCHMD_NO_TEMP_SENSORS[7] = { 3, 3, 4, 3, 5, 5, 11 };
217
218/* temp status register bitmasks */
219#define FSCHMD_TEMP_WORKING 0x01
220#define FSCHMD_TEMP_ALERT 0x02
221#define FSCHMD_TEMP_DISABLED 0x80
222/* there only really is an alarm if the sensor is working and alert == 1 */
223#define FSCHMD_TEMP_ALARM_MASK \
224 (FSCHMD_TEMP_WORKING | FSCHMD_TEMP_ALERT)
225
226/*
227 * Functions declarations
228 */
229
230static int fschmd_probe(struct i2c_client *client,
231 const struct i2c_device_id *id);
232static int fschmd_detect(struct i2c_client *client,
233 struct i2c_board_info *info);
234static int fschmd_remove(struct i2c_client *client);
235static struct fschmd_data *fschmd_update_device(struct device *dev);
236
237/*
238 * Driver data (common to all clients)
239 */
240
241static const struct i2c_device_id fschmd_id[] = {
242 { "fscpos", fscpos },
243 { "fscher", fscher },
244 { "fscscy", fscscy },
245 { "fschrc", fschrc },
246 { "fschmd", fschmd },
247 { "fschds", fschds },
248 { "fscsyl", fscsyl },
249 { }
250};
251MODULE_DEVICE_TABLE(i2c, fschmd_id);
252
253static struct i2c_driver fschmd_driver = {
254 .class = I2C_CLASS_HWMON,
255 .driver = {
256 .name = "fschmd",
257 },
258 .probe = fschmd_probe,
259 .remove = fschmd_remove,
260 .id_table = fschmd_id,
261 .detect = fschmd_detect,
262 .address_list = normal_i2c,
263};
264
265/*
266 * Client data (each client gets its own)
267 */
268
269struct fschmd_data {
270 struct i2c_client *client;
271 struct device *hwmon_dev;
272 struct mutex update_lock;
273 struct mutex watchdog_lock;
274 struct list_head list; /* member of the watchdog_data_list */
275 struct kref kref;
276 struct miscdevice watchdog_miscdev;
277 enum chips kind;
278 unsigned long watchdog_is_open;
279 char watchdog_expect_close;
280 char watchdog_name[10]; /* must be unique to avoid sysfs conflict */
281 char valid; /* zero until following fields are valid */
282 unsigned long last_updated; /* in jiffies */
283
284 /* register values */
285 u8 revision; /* chip revision */
286 u8 global_control; /* global control register */
287 u8 watchdog_control; /* watchdog control register */
288 u8 watchdog_state; /* watchdog status register */
289 u8 watchdog_preset; /* watchdog counter preset on trigger val */
290 u8 volt[6]; /* voltage */
291 u8 temp_act[11]; /* temperature */
292 u8 temp_status[11]; /* status of sensor */
293 u8 temp_max[11]; /* high temp limit, notice: undocumented! */
294 u8 fan_act[7]; /* fans revolutions per second */
295 u8 fan_status[7]; /* fan status */
296 u8 fan_min[7]; /* fan min value for rps */
297 u8 fan_ripple[7]; /* divider for rps */
298};
299
300/*
301 * Global variables to hold information read from special DMI tables, which are
302 * available on FSC machines with an fscher or later chip. There is no need to
303 * protect these with a lock as they are only modified from our attach function
304 * which always gets called with the i2c-core lock held and never accessed
305 * before the attach function is done with them.
306 */
307static int dmi_mult[6] = { 490, 200, 100, 100, 200, 100 };
308static int dmi_offset[6] = { 0, 0, 0, 0, 0, 0 };
309static int dmi_vref = -1;
310
311/*
312 * Somewhat ugly :( global data pointer list with all fschmd devices, so that
313 * we can find our device data as when using misc_register there is no other
314 * method to get to ones device data from the open fop.
315 */
316static LIST_HEAD(watchdog_data_list);
317/* Note this lock not only protect list access, but also data.kref access */
318static DEFINE_MUTEX(watchdog_data_mutex);
319
320/*
321 * Release our data struct when we're detached from the i2c client *and* all
322 * references to our watchdog device are released
323 */
324static void fschmd_release_resources(struct kref *ref)
325{
326 struct fschmd_data *data = container_of(ref, struct fschmd_data, kref);
327 kfree(data);
328}
329
330/*
331 * Sysfs attr show / store functions
332 */
333
334static ssize_t show_in_value(struct device *dev,
335 struct device_attribute *devattr, char *buf)
336{
337 const int max_reading[3] = { 14200, 6600, 3300 };
338 int index = to_sensor_dev_attr(devattr)->index;
339 struct fschmd_data *data = fschmd_update_device(dev);
340
341 if (data->kind == fscher || data->kind >= fschrc)
342 return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref *
343 dmi_mult[index]) / 255 + dmi_offset[index]);
344 else
345 return sprintf(buf, "%d\n", (data->volt[index] *
346 max_reading[index] + 128) / 255);
347}
348
349
350#define TEMP_FROM_REG(val) (((val) - 128) * 1000)
351
352static ssize_t show_temp_value(struct device *dev,
353 struct device_attribute *devattr, char *buf)
354{
355 int index = to_sensor_dev_attr(devattr)->index;
356 struct fschmd_data *data = fschmd_update_device(dev);
357
358 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index]));
359}
360
361static ssize_t show_temp_max(struct device *dev,
362 struct device_attribute *devattr, char *buf)
363{
364 int index = to_sensor_dev_attr(devattr)->index;
365 struct fschmd_data *data = fschmd_update_device(dev);
366
367 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index]));
368}
369
370static ssize_t store_temp_max(struct device *dev, struct device_attribute
371 *devattr, const char *buf, size_t count)
372{
373 int index = to_sensor_dev_attr(devattr)->index;
374 struct fschmd_data *data = dev_get_drvdata(dev);
375 long v;
376 int err;
377
378 err = kstrtol(buf, 10, &v);
379 if (err)
380 return err;
381
382 v = SENSORS_LIMIT(v / 1000, -128, 127) + 128;
383
384 mutex_lock(&data->update_lock);
385 i2c_smbus_write_byte_data(to_i2c_client(dev),
386 FSCHMD_REG_TEMP_LIMIT[data->kind][index], v);
387 data->temp_max[index] = v;
388 mutex_unlock(&data->update_lock);
389
390 return count;
391}
392
393static ssize_t show_temp_fault(struct device *dev,
394 struct device_attribute *devattr, char *buf)
395{
396 int index = to_sensor_dev_attr(devattr)->index;
397 struct fschmd_data *data = fschmd_update_device(dev);
398
399 /* bit 0 set means sensor working ok, so no fault! */
400 if (data->temp_status[index] & FSCHMD_TEMP_WORKING)
401 return sprintf(buf, "0\n");
402 else
403 return sprintf(buf, "1\n");
404}
405
406static ssize_t show_temp_alarm(struct device *dev,
407 struct device_attribute *devattr, char *buf)
408{
409 int index = to_sensor_dev_attr(devattr)->index;
410 struct fschmd_data *data = fschmd_update_device(dev);
411
412 if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) ==
413 FSCHMD_TEMP_ALARM_MASK)
414 return sprintf(buf, "1\n");
415 else
416 return sprintf(buf, "0\n");
417}
418
419
420#define RPM_FROM_REG(val) ((val) * 60)
421
422static ssize_t show_fan_value(struct device *dev,
423 struct device_attribute *devattr, char *buf)
424{
425 int index = to_sensor_dev_attr(devattr)->index;
426 struct fschmd_data *data = fschmd_update_device(dev);
427
428 return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index]));
429}
430
431static ssize_t show_fan_div(struct device *dev,
432 struct device_attribute *devattr, char *buf)
433{
434 int index = to_sensor_dev_attr(devattr)->index;
435 struct fschmd_data *data = fschmd_update_device(dev);
436
437 /* bits 2..7 reserved => mask with 3 */
438 return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3));
439}
440
441static ssize_t store_fan_div(struct device *dev, struct device_attribute
442 *devattr, const char *buf, size_t count)
443{
444 u8 reg;
445 int index = to_sensor_dev_attr(devattr)->index;
446 struct fschmd_data *data = dev_get_drvdata(dev);
447 /* supported values: 2, 4, 8 */
448 unsigned long v;
449 int err;
450
451 err = kstrtoul(buf, 10, &v);
452 if (err)
453 return err;
454
455 switch (v) {
456 case 2:
457 v = 1;
458 break;
459 case 4:
460 v = 2;
461 break;
462 case 8:
463 v = 3;
464 break;
465 default:
466 dev_err(dev, "fan_div value %lu not supported. "
467 "Choose one of 2, 4 or 8!\n", v);
468 return -EINVAL;
469 }
470
471 mutex_lock(&data->update_lock);
472
473 reg = i2c_smbus_read_byte_data(to_i2c_client(dev),
474 FSCHMD_REG_FAN_RIPPLE[data->kind][index]);
475
476 /* bits 2..7 reserved => mask with 0x03 */
477 reg &= ~0x03;
478 reg |= v;
479
480 i2c_smbus_write_byte_data(to_i2c_client(dev),
481 FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg);
482
483 data->fan_ripple[index] = reg;
484
485 mutex_unlock(&data->update_lock);
486
487 return count;
488}
489
490static ssize_t show_fan_alarm(struct device *dev,
491 struct device_attribute *devattr, char *buf)
492{
493 int index = to_sensor_dev_attr(devattr)->index;
494 struct fschmd_data *data = fschmd_update_device(dev);
495
496 if (data->fan_status[index] & FSCHMD_FAN_ALARM)
497 return sprintf(buf, "1\n");
498 else
499 return sprintf(buf, "0\n");
500}
501
502static ssize_t show_fan_fault(struct device *dev,
503 struct device_attribute *devattr, char *buf)
504{
505 int index = to_sensor_dev_attr(devattr)->index;
506 struct fschmd_data *data = fschmd_update_device(dev);
507
508 if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT)
509 return sprintf(buf, "1\n");
510 else
511 return sprintf(buf, "0\n");
512}
513
514
515static ssize_t show_pwm_auto_point1_pwm(struct device *dev,
516 struct device_attribute *devattr, char *buf)
517{
518 int index = to_sensor_dev_attr(devattr)->index;
519 struct fschmd_data *data = fschmd_update_device(dev);
520 int val = data->fan_min[index];
521
522 /* 0 = allow turning off (except on the syl), 1-255 = 50-100% */
523 if (val || data->kind == fscsyl)
524 val = val / 2 + 128;
525
526 return sprintf(buf, "%d\n", val);
527}
528
529static ssize_t store_pwm_auto_point1_pwm(struct device *dev,
530 struct device_attribute *devattr, const char *buf, size_t count)
531{
532 int index = to_sensor_dev_attr(devattr)->index;
533 struct fschmd_data *data = dev_get_drvdata(dev);
534 unsigned long v;
535 int err;
536
537 err = kstrtoul(buf, 10, &v);
538 if (err)
539 return err;
540
541 /* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */
542 if (v || data->kind == fscsyl) {
543 v = SENSORS_LIMIT(v, 128, 255);
544 v = (v - 128) * 2 + 1;
545 }
546
547 mutex_lock(&data->update_lock);
548
549 i2c_smbus_write_byte_data(to_i2c_client(dev),
550 FSCHMD_REG_FAN_MIN[data->kind][index], v);
551 data->fan_min[index] = v;
552
553 mutex_unlock(&data->update_lock);
554
555 return count;
556}
557
558
559/*
560 * The FSC hwmon family has the ability to force an attached alert led to flash
561 * from software, we export this as an alert_led sysfs attr
562 */
563static ssize_t show_alert_led(struct device *dev,
564 struct device_attribute *devattr, char *buf)
565{
566 struct fschmd_data *data = fschmd_update_device(dev);
567
568 if (data->global_control & FSCHMD_CONTROL_ALERT_LED)
569 return sprintf(buf, "1\n");
570 else
571 return sprintf(buf, "0\n");
572}
573
574static ssize_t store_alert_led(struct device *dev,
575 struct device_attribute *devattr, const char *buf, size_t count)
576{
577 u8 reg;
578 struct fschmd_data *data = dev_get_drvdata(dev);
579 unsigned long v;
580 int err;
581
582 err = kstrtoul(buf, 10, &v);
583 if (err)
584 return err;
585
586 mutex_lock(&data->update_lock);
587
588 reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL);
589
590 if (v)
591 reg |= FSCHMD_CONTROL_ALERT_LED;
592 else
593 reg &= ~FSCHMD_CONTROL_ALERT_LED;
594
595 i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg);
596
597 data->global_control = reg;
598
599 mutex_unlock(&data->update_lock);
600
601 return count;
602}
603
604static DEVICE_ATTR(alert_led, 0644, show_alert_led, store_alert_led);
605
606static struct sensor_device_attribute fschmd_attr[] = {
607 SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0),
608 SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1),
609 SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2),
610 SENSOR_ATTR(in3_input, 0444, show_in_value, NULL, 3),
611 SENSOR_ATTR(in4_input, 0444, show_in_value, NULL, 4),
612 SENSOR_ATTR(in5_input, 0444, show_in_value, NULL, 5),
613};
614
615static struct sensor_device_attribute fschmd_temp_attr[] = {
616 SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
617 SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0),
618 SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0),
619 SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0),
620 SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
621 SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1),
622 SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1),
623 SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1),
624 SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2),
625 SENSOR_ATTR(temp3_max, 0644, show_temp_max, store_temp_max, 2),
626 SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2),
627 SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2),
628 SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3),
629 SENSOR_ATTR(temp4_max, 0644, show_temp_max, store_temp_max, 3),
630 SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3),
631 SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3),
632 SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4),
633 SENSOR_ATTR(temp5_max, 0644, show_temp_max, store_temp_max, 4),
634 SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4),
635 SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4),
636 SENSOR_ATTR(temp6_input, 0444, show_temp_value, NULL, 5),
637 SENSOR_ATTR(temp6_max, 0644, show_temp_max, store_temp_max, 5),
638 SENSOR_ATTR(temp6_fault, 0444, show_temp_fault, NULL, 5),
639 SENSOR_ATTR(temp6_alarm, 0444, show_temp_alarm, NULL, 5),
640 SENSOR_ATTR(temp7_input, 0444, show_temp_value, NULL, 6),
641 SENSOR_ATTR(temp7_max, 0644, show_temp_max, store_temp_max, 6),
642 SENSOR_ATTR(temp7_fault, 0444, show_temp_fault, NULL, 6),
643 SENSOR_ATTR(temp7_alarm, 0444, show_temp_alarm, NULL, 6),
644 SENSOR_ATTR(temp8_input, 0444, show_temp_value, NULL, 7),
645 SENSOR_ATTR(temp8_max, 0644, show_temp_max, store_temp_max, 7),
646 SENSOR_ATTR(temp8_fault, 0444, show_temp_fault, NULL, 7),
647 SENSOR_ATTR(temp8_alarm, 0444, show_temp_alarm, NULL, 7),
648 SENSOR_ATTR(temp9_input, 0444, show_temp_value, NULL, 8),
649 SENSOR_ATTR(temp9_max, 0644, show_temp_max, store_temp_max, 8),
650 SENSOR_ATTR(temp9_fault, 0444, show_temp_fault, NULL, 8),
651 SENSOR_ATTR(temp9_alarm, 0444, show_temp_alarm, NULL, 8),
652 SENSOR_ATTR(temp10_input, 0444, show_temp_value, NULL, 9),
653 SENSOR_ATTR(temp10_max, 0644, show_temp_max, store_temp_max, 9),
654 SENSOR_ATTR(temp10_fault, 0444, show_temp_fault, NULL, 9),
655 SENSOR_ATTR(temp10_alarm, 0444, show_temp_alarm, NULL, 9),
656 SENSOR_ATTR(temp11_input, 0444, show_temp_value, NULL, 10),
657 SENSOR_ATTR(temp11_max, 0644, show_temp_max, store_temp_max, 10),
658 SENSOR_ATTR(temp11_fault, 0444, show_temp_fault, NULL, 10),
659 SENSOR_ATTR(temp11_alarm, 0444, show_temp_alarm, NULL, 10),
660};
661
662static struct sensor_device_attribute fschmd_fan_attr[] = {
663 SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0),
664 SENSOR_ATTR(fan1_div, 0644, show_fan_div, store_fan_div, 0),
665 SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0),
666 SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0),
667 SENSOR_ATTR(pwm1_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
668 store_pwm_auto_point1_pwm, 0),
669 SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1),
670 SENSOR_ATTR(fan2_div, 0644, show_fan_div, store_fan_div, 1),
671 SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1),
672 SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1),
673 SENSOR_ATTR(pwm2_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
674 store_pwm_auto_point1_pwm, 1),
675 SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2),
676 SENSOR_ATTR(fan3_div, 0644, show_fan_div, store_fan_div, 2),
677 SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2),
678 SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2),
679 SENSOR_ATTR(pwm3_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
680 store_pwm_auto_point1_pwm, 2),
681 SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3),
682 SENSOR_ATTR(fan4_div, 0644, show_fan_div, store_fan_div, 3),
683 SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3),
684 SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3),
685 SENSOR_ATTR(pwm4_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
686 store_pwm_auto_point1_pwm, 3),
687 SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4),
688 SENSOR_ATTR(fan5_div, 0644, show_fan_div, store_fan_div, 4),
689 SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4),
690 SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4),
691 SENSOR_ATTR(pwm5_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
692 store_pwm_auto_point1_pwm, 4),
693 SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5),
694 SENSOR_ATTR(fan6_div, 0644, show_fan_div, store_fan_div, 5),
695 SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5),
696 SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5),
697 SENSOR_ATTR(pwm6_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
698 store_pwm_auto_point1_pwm, 5),
699 SENSOR_ATTR(fan7_input, 0444, show_fan_value, NULL, 6),
700 SENSOR_ATTR(fan7_div, 0644, show_fan_div, store_fan_div, 6),
701 SENSOR_ATTR(fan7_alarm, 0444, show_fan_alarm, NULL, 6),
702 SENSOR_ATTR(fan7_fault, 0444, show_fan_fault, NULL, 6),
703 SENSOR_ATTR(pwm7_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
704 store_pwm_auto_point1_pwm, 6),
705};
706
707
708/*
709 * Watchdog routines
710 */
711
712static int watchdog_set_timeout(struct fschmd_data *data, int timeout)
713{
714 int ret, resolution;
715 int kind = data->kind + 1; /* 0-x array index -> 1-x module param */
716
717 /* 2 second or 60 second resolution? */
718 if (timeout <= 510 || kind == fscpos || kind == fscscy)
719 resolution = 2;
720 else
721 resolution = 60;
722
723 if (timeout < resolution || timeout > (resolution * 255))
724 return -EINVAL;
725
726 mutex_lock(&data->watchdog_lock);
727 if (!data->client) {
728 ret = -ENODEV;
729 goto leave;
730 }
731
732 if (resolution == 2)
733 data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_RESOLUTION;
734 else
735 data->watchdog_control |= FSCHMD_WDOG_CONTROL_RESOLUTION;
736
737 data->watchdog_preset = DIV_ROUND_UP(timeout, resolution);
738
739 /* Write new timeout value */
740 i2c_smbus_write_byte_data(data->client,
741 FSCHMD_REG_WDOG_PRESET[data->kind], data->watchdog_preset);
742 /* Write new control register, do not trigger! */
743 i2c_smbus_write_byte_data(data->client,
744 FSCHMD_REG_WDOG_CONTROL[data->kind],
745 data->watchdog_control & ~FSCHMD_WDOG_CONTROL_TRIGGER);
746
747 ret = data->watchdog_preset * resolution;
748
749leave:
750 mutex_unlock(&data->watchdog_lock);
751 return ret;
752}
753
754static int watchdog_get_timeout(struct fschmd_data *data)
755{
756 int timeout;
757
758 mutex_lock(&data->watchdog_lock);
759 if (data->watchdog_control & FSCHMD_WDOG_CONTROL_RESOLUTION)
760 timeout = data->watchdog_preset * 60;
761 else
762 timeout = data->watchdog_preset * 2;
763 mutex_unlock(&data->watchdog_lock);
764
765 return timeout;
766}
767
768static int watchdog_trigger(struct fschmd_data *data)
769{
770 int ret = 0;
771
772 mutex_lock(&data->watchdog_lock);
773 if (!data->client) {
774 ret = -ENODEV;
775 goto leave;
776 }
777
778 data->watchdog_control |= FSCHMD_WDOG_CONTROL_TRIGGER;
779 i2c_smbus_write_byte_data(data->client,
780 FSCHMD_REG_WDOG_CONTROL[data->kind],
781 data->watchdog_control);
782leave:
783 mutex_unlock(&data->watchdog_lock);
784 return ret;
785}
786
787static int watchdog_stop(struct fschmd_data *data)
788{
789 int ret = 0;
790
791 mutex_lock(&data->watchdog_lock);
792 if (!data->client) {
793 ret = -ENODEV;
794 goto leave;
795 }
796
797 data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_STARTED;
798 /*
799 * Don't store the stop flag in our watchdog control register copy, as
800 * its a write only bit (read always returns 0)
801 */
802 i2c_smbus_write_byte_data(data->client,
803 FSCHMD_REG_WDOG_CONTROL[data->kind],
804 data->watchdog_control | FSCHMD_WDOG_CONTROL_STOP);
805leave:
806 mutex_unlock(&data->watchdog_lock);
807 return ret;
808}
809
810static int watchdog_open(struct inode *inode, struct file *filp)
811{
812 struct fschmd_data *pos, *data = NULL;
813 int watchdog_is_open;
814
815 /*
816 * We get called from drivers/char/misc.c with misc_mtx hold, and we
817 * call misc_register() from fschmd_probe() with watchdog_data_mutex
818 * hold, as misc_register() takes the misc_mtx lock, this is a possible
819 * deadlock, so we use mutex_trylock here.
820 */
821 if (!mutex_trylock(&watchdog_data_mutex))
822 return -ERESTARTSYS;
823 list_for_each_entry(pos, &watchdog_data_list, list) {
824 if (pos->watchdog_miscdev.minor == iminor(inode)) {
825 data = pos;
826 break;
827 }
828 }
829 /* Note we can never not have found data, so we don't check for this */
830 watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
831 if (!watchdog_is_open)
832 kref_get(&data->kref);
833 mutex_unlock(&watchdog_data_mutex);
834
835 if (watchdog_is_open)
836 return -EBUSY;
837
838 /* Start the watchdog */
839 watchdog_trigger(data);
840 filp->private_data = data;
841
842 return nonseekable_open(inode, filp);
843}
844
845static int watchdog_release(struct inode *inode, struct file *filp)
846{
847 struct fschmd_data *data = filp->private_data;
848
849 if (data->watchdog_expect_close) {
850 watchdog_stop(data);
851 data->watchdog_expect_close = 0;
852 } else {
853 watchdog_trigger(data);
854 dev_crit(&data->client->dev,
855 "unexpected close, not stopping watchdog!\n");
856 }
857
858 clear_bit(0, &data->watchdog_is_open);
859
860 mutex_lock(&watchdog_data_mutex);
861 kref_put(&data->kref, fschmd_release_resources);
862 mutex_unlock(&watchdog_data_mutex);
863
864 return 0;
865}
866
867static ssize_t watchdog_write(struct file *filp, const char __user *buf,
868 size_t count, loff_t *offset)
869{
870 int ret;
871 struct fschmd_data *data = filp->private_data;
872
873 if (count) {
874 if (!nowayout) {
875 size_t i;
876
877 /* Clear it in case it was set with a previous write */
878 data->watchdog_expect_close = 0;
879
880 for (i = 0; i != count; i++) {
881 char c;
882 if (get_user(c, buf + i))
883 return -EFAULT;
884 if (c == 'V')
885 data->watchdog_expect_close = 1;
886 }
887 }
888 ret = watchdog_trigger(data);
889 if (ret < 0)
890 return ret;
891 }
892 return count;
893}
894
895static long watchdog_ioctl(struct file *filp, unsigned int cmd,
896 unsigned long arg)
897{
898 struct watchdog_info ident = {
899 .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
900 WDIOF_CARDRESET,
901 .identity = "FSC watchdog"
902 };
903 int i, ret = 0;
904 struct fschmd_data *data = filp->private_data;
905
906 switch (cmd) {
907 case WDIOC_GETSUPPORT:
908 ident.firmware_version = data->revision;
909 if (!nowayout)
910 ident.options |= WDIOF_MAGICCLOSE;
911 if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
912 ret = -EFAULT;
913 break;
914
915 case WDIOC_GETSTATUS:
916 ret = put_user(0, (int __user *)arg);
917 break;
918
919 case WDIOC_GETBOOTSTATUS:
920 if (data->watchdog_state & FSCHMD_WDOG_STATE_CARDRESET)
921 ret = put_user(WDIOF_CARDRESET, (int __user *)arg);
922 else
923 ret = put_user(0, (int __user *)arg);
924 break;
925
926 case WDIOC_KEEPALIVE:
927 ret = watchdog_trigger(data);
928 break;
929
930 case WDIOC_GETTIMEOUT:
931 i = watchdog_get_timeout(data);
932 ret = put_user(i, (int __user *)arg);
933 break;
934
935 case WDIOC_SETTIMEOUT:
936 if (get_user(i, (int __user *)arg)) {
937 ret = -EFAULT;
938 break;
939 }
940 ret = watchdog_set_timeout(data, i);
941 if (ret > 0)
942 ret = put_user(ret, (int __user *)arg);
943 break;
944
945 case WDIOC_SETOPTIONS:
946 if (get_user(i, (int __user *)arg)) {
947 ret = -EFAULT;
948 break;
949 }
950
951 if (i & WDIOS_DISABLECARD)
952 ret = watchdog_stop(data);
953 else if (i & WDIOS_ENABLECARD)
954 ret = watchdog_trigger(data);
955 else
956 ret = -EINVAL;
957
958 break;
959 default:
960 ret = -ENOTTY;
961 }
962 return ret;
963}
964
965static const struct file_operations watchdog_fops = {
966 .owner = THIS_MODULE,
967 .llseek = no_llseek,
968 .open = watchdog_open,
969 .release = watchdog_release,
970 .write = watchdog_write,
971 .unlocked_ioctl = watchdog_ioctl,
972};
973
974
975/*
976 * Detect, register, unregister and update device functions
977 */
978
979/*
980 * DMI decode routine to read voltage scaling factors from special DMI tables,
981 * which are available on FSC machines with an fscher or later chip.
982 */
983static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy)
984{
985 int i, mult[3] = { 0 }, offset[3] = { 0 }, vref = 0, found = 0;
986
987 /*
988 * dmi code ugliness, we get passed the address of the contents of
989 * a complete DMI record, but in the form of a dmi_header pointer, in
990 * reality this address holds header->length bytes of which the header
991 * are the first 4 bytes
992 */
993 u8 *dmi_data = (u8 *)header;
994
995 /* We are looking for OEM-specific type 185 */
996 if (header->type != 185)
997 return;
998
999 /*
1000 * we are looking for what Siemens calls "subtype" 19, the subtype
1001 * is stored in byte 5 of the dmi block
1002 */
1003 if (header->length < 5 || dmi_data[4] != 19)
1004 return;
1005
1006 /*
1007 * After the subtype comes 1 unknown byte and then blocks of 5 bytes,
1008 * consisting of what Siemens calls an "Entity" number, followed by
1009 * 2 16-bit words in LSB first order
1010 */
1011 for (i = 6; (i + 4) < header->length; i += 5) {
1012 /* entity 1 - 3: voltage multiplier and offset */
1013 if (dmi_data[i] >= 1 && dmi_data[i] <= 3) {
1014 /* Our in sensors order and the DMI order differ */
1015 const int shuffle[3] = { 1, 0, 2 };
1016 int in = shuffle[dmi_data[i] - 1];
1017
1018 /* Check for twice the same entity */
1019 if (found & (1 << in))
1020 return;
1021
1022 mult[in] = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
1023 offset[in] = dmi_data[i + 3] | (dmi_data[i + 4] << 8);
1024
1025 found |= 1 << in;
1026 }
1027
1028 /* entity 7: reference voltage */
1029 if (dmi_data[i] == 7) {
1030 /* Check for twice the same entity */
1031 if (found & 0x08)
1032 return;
1033
1034 vref = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
1035
1036 found |= 0x08;
1037 }
1038 }
1039
1040 if (found == 0x0F) {
1041 for (i = 0; i < 3; i++) {
1042 dmi_mult[i] = mult[i] * 10;
1043 dmi_offset[i] = offset[i] * 10;
1044 }
1045 /*
1046 * According to the docs there should be separate dmi entries
1047 * for the mult's and offsets of in3-5 of the syl, but on
1048 * my test machine these are not present
1049 */
1050 dmi_mult[3] = dmi_mult[2];
1051 dmi_mult[4] = dmi_mult[1];
1052 dmi_mult[5] = dmi_mult[2];
1053 dmi_offset[3] = dmi_offset[2];
1054 dmi_offset[4] = dmi_offset[1];
1055 dmi_offset[5] = dmi_offset[2];
1056 dmi_vref = vref;
1057 }
1058}
1059
1060static int fschmd_detect(struct i2c_client *client,
1061 struct i2c_board_info *info)
1062{
1063 enum chips kind;
1064 struct i2c_adapter *adapter = client->adapter;
1065 char id[4];
1066
1067 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1068 return -ENODEV;
1069
1070 /* Detect & Identify the chip */
1071 id[0] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_0);
1072 id[1] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_1);
1073 id[2] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_2);
1074 id[3] = '\0';
1075
1076 if (!strcmp(id, "PEG"))
1077 kind = fscpos;
1078 else if (!strcmp(id, "HER"))
1079 kind = fscher;
1080 else if (!strcmp(id, "SCY"))
1081 kind = fscscy;
1082 else if (!strcmp(id, "HRC"))
1083 kind = fschrc;
1084 else if (!strcmp(id, "HMD"))
1085 kind = fschmd;
1086 else if (!strcmp(id, "HDS"))
1087 kind = fschds;
1088 else if (!strcmp(id, "SYL"))
1089 kind = fscsyl;
1090 else
1091 return -ENODEV;
1092
1093 strlcpy(info->type, fschmd_id[kind].name, I2C_NAME_SIZE);
1094
1095 return 0;
1096}
1097
1098static int fschmd_probe(struct i2c_client *client,
1099 const struct i2c_device_id *id)
1100{
1101 struct fschmd_data *data;
1102 const char * const names[7] = { "Poseidon", "Hermes", "Scylla",
1103 "Heracles", "Heimdall", "Hades", "Syleus" };
1104 const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 };
1105 int i, err;
1106 enum chips kind = id->driver_data;
1107
1108 data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL);
1109 if (!data)
1110 return -ENOMEM;
1111
1112 i2c_set_clientdata(client, data);
1113 mutex_init(&data->update_lock);
1114 mutex_init(&data->watchdog_lock);
1115 INIT_LIST_HEAD(&data->list);
1116 kref_init(&data->kref);
1117 /*
1118 * Store client pointer in our data struct for watchdog usage
1119 * (where the client is found through a data ptr instead of the
1120 * otherway around)
1121 */
1122 data->client = client;
1123 data->kind = kind;
1124
1125 if (kind == fscpos) {
1126 /*
1127 * The Poseidon has hardwired temp limits, fill these
1128 * in for the alarm resetting code
1129 */
1130 data->temp_max[0] = 70 + 128;
1131 data->temp_max[1] = 50 + 128;
1132 data->temp_max[2] = 50 + 128;
1133 }
1134
1135 /* Read the special DMI table for fscher and newer chips */
1136 if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) {
1137 dmi_walk(fschmd_dmi_decode, NULL);
1138 if (dmi_vref == -1) {
1139 dev_warn(&client->dev,
1140 "Couldn't get voltage scaling factors from "
1141 "BIOS DMI table, using builtin defaults\n");
1142 dmi_vref = 33;
1143 }
1144 }
1145
1146 /* Read in some never changing registers */
1147 data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION);
1148 data->global_control = i2c_smbus_read_byte_data(client,
1149 FSCHMD_REG_CONTROL);
1150 data->watchdog_control = i2c_smbus_read_byte_data(client,
1151 FSCHMD_REG_WDOG_CONTROL[data->kind]);
1152 data->watchdog_state = i2c_smbus_read_byte_data(client,
1153 FSCHMD_REG_WDOG_STATE[data->kind]);
1154 data->watchdog_preset = i2c_smbus_read_byte_data(client,
1155 FSCHMD_REG_WDOG_PRESET[data->kind]);
1156
1157 err = device_create_file(&client->dev, &dev_attr_alert_led);
1158 if (err)
1159 goto exit_detach;
1160
1161 for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++) {
1162 err = device_create_file(&client->dev,
1163 &fschmd_attr[i].dev_attr);
1164 if (err)
1165 goto exit_detach;
1166 }
1167
1168 for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) {
1169 /* Poseidon doesn't have TEMP_LIMIT registers */
1170 if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show ==
1171 show_temp_max)
1172 continue;
1173
1174 if (kind == fscsyl) {
1175 if (i % 4 == 0)
1176 data->temp_status[i / 4] =
1177 i2c_smbus_read_byte_data(client,
1178 FSCHMD_REG_TEMP_STATE
1179 [data->kind][i / 4]);
1180 if (data->temp_status[i / 4] & FSCHMD_TEMP_DISABLED)
1181 continue;
1182 }
1183
1184 err = device_create_file(&client->dev,
1185 &fschmd_temp_attr[i].dev_attr);
1186 if (err)
1187 goto exit_detach;
1188 }
1189
1190 for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) {
1191 /* Poseidon doesn't have a FAN_MIN register for its 3rd fan */
1192 if (kind == fscpos &&
1193 !strcmp(fschmd_fan_attr[i].dev_attr.attr.name,
1194 "pwm3_auto_point1_pwm"))
1195 continue;
1196
1197 if (kind == fscsyl) {
1198 if (i % 5 == 0)
1199 data->fan_status[i / 5] =
1200 i2c_smbus_read_byte_data(client,
1201 FSCHMD_REG_FAN_STATE
1202 [data->kind][i / 5]);
1203 if (data->fan_status[i / 5] & FSCHMD_FAN_DISABLED)
1204 continue;
1205 }
1206
1207 err = device_create_file(&client->dev,
1208 &fschmd_fan_attr[i].dev_attr);
1209 if (err)
1210 goto exit_detach;
1211 }
1212
1213 data->hwmon_dev = hwmon_device_register(&client->dev);
1214 if (IS_ERR(data->hwmon_dev)) {
1215 err = PTR_ERR(data->hwmon_dev);
1216 data->hwmon_dev = NULL;
1217 goto exit_detach;
1218 }
1219
1220 /*
1221 * We take the data_mutex lock early so that watchdog_open() cannot
1222 * run when misc_register() has completed, but we've not yet added
1223 * our data to the watchdog_data_list (and set the default timeout)
1224 */
1225 mutex_lock(&watchdog_data_mutex);
1226 for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) {
1227 /* Register our watchdog part */
1228 snprintf(data->watchdog_name, sizeof(data->watchdog_name),
1229 "watchdog%c", (i == 0) ? '\0' : ('0' + i));
1230 data->watchdog_miscdev.name = data->watchdog_name;
1231 data->watchdog_miscdev.fops = &watchdog_fops;
1232 data->watchdog_miscdev.minor = watchdog_minors[i];
1233 err = misc_register(&data->watchdog_miscdev);
1234 if (err == -EBUSY)
1235 continue;
1236 if (err) {
1237 data->watchdog_miscdev.minor = 0;
1238 dev_err(&client->dev,
1239 "Registering watchdog chardev: %d\n", err);
1240 break;
1241 }
1242
1243 list_add(&data->list, &watchdog_data_list);
1244 watchdog_set_timeout(data, 60);
1245 dev_info(&client->dev,
1246 "Registered watchdog chardev major 10, minor: %d\n",
1247 watchdog_minors[i]);
1248 break;
1249 }
1250 if (i == ARRAY_SIZE(watchdog_minors)) {
1251 data->watchdog_miscdev.minor = 0;
1252 dev_warn(&client->dev, "Couldn't register watchdog chardev "
1253 "(due to no free minor)\n");
1254 }
1255 mutex_unlock(&watchdog_data_mutex);
1256
1257 dev_info(&client->dev, "Detected FSC %s chip, revision: %d\n",
1258 names[data->kind], (int) data->revision);
1259
1260 return 0;
1261
1262exit_detach:
1263 fschmd_remove(client); /* will also free data for us */
1264 return err;
1265}
1266
1267static int fschmd_remove(struct i2c_client *client)
1268{
1269 struct fschmd_data *data = i2c_get_clientdata(client);
1270 int i;
1271
1272 /* Unregister the watchdog (if registered) */
1273 if (data->watchdog_miscdev.minor) {
1274 misc_deregister(&data->watchdog_miscdev);
1275 if (data->watchdog_is_open) {
1276 dev_warn(&client->dev,
1277 "i2c client detached with watchdog open! "
1278 "Stopping watchdog.\n");
1279 watchdog_stop(data);
1280 }
1281 mutex_lock(&watchdog_data_mutex);
1282 list_del(&data->list);
1283 mutex_unlock(&watchdog_data_mutex);
1284 /* Tell the watchdog code the client is gone */
1285 mutex_lock(&data->watchdog_lock);
1286 data->client = NULL;
1287 mutex_unlock(&data->watchdog_lock);
1288 }
1289
1290 /*
1291 * Check if registered in case we're called from fschmd_detect
1292 * to cleanup after an error
1293 */
1294 if (data->hwmon_dev)
1295 hwmon_device_unregister(data->hwmon_dev);
1296
1297 device_remove_file(&client->dev, &dev_attr_alert_led);
1298 for (i = 0; i < (FSCHMD_NO_VOLT_SENSORS[data->kind]); i++)
1299 device_remove_file(&client->dev, &fschmd_attr[i].dev_attr);
1300 for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++)
1301 device_remove_file(&client->dev,
1302 &fschmd_temp_attr[i].dev_attr);
1303 for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++)
1304 device_remove_file(&client->dev,
1305 &fschmd_fan_attr[i].dev_attr);
1306
1307 mutex_lock(&watchdog_data_mutex);
1308 kref_put(&data->kref, fschmd_release_resources);
1309 mutex_unlock(&watchdog_data_mutex);
1310
1311 return 0;
1312}
1313
1314static struct fschmd_data *fschmd_update_device(struct device *dev)
1315{
1316 struct i2c_client *client = to_i2c_client(dev);
1317 struct fschmd_data *data = i2c_get_clientdata(client);
1318 int i;
1319
1320 mutex_lock(&data->update_lock);
1321
1322 if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
1323
1324 for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) {
1325 data->temp_act[i] = i2c_smbus_read_byte_data(client,
1326 FSCHMD_REG_TEMP_ACT[data->kind][i]);
1327 data->temp_status[i] = i2c_smbus_read_byte_data(client,
1328 FSCHMD_REG_TEMP_STATE[data->kind][i]);
1329
1330 /* The fscpos doesn't have TEMP_LIMIT registers */
1331 if (FSCHMD_REG_TEMP_LIMIT[data->kind][i])
1332 data->temp_max[i] = i2c_smbus_read_byte_data(
1333 client,
1334 FSCHMD_REG_TEMP_LIMIT[data->kind][i]);
1335
1336 /*
1337 * reset alarm if the alarm condition is gone,
1338 * the chip doesn't do this itself
1339 */
1340 if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) ==
1341 FSCHMD_TEMP_ALARM_MASK &&
1342 data->temp_act[i] < data->temp_max[i])
1343 i2c_smbus_write_byte_data(client,
1344 FSCHMD_REG_TEMP_STATE[data->kind][i],
1345 data->temp_status[i]);
1346 }
1347
1348 for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) {
1349 data->fan_act[i] = i2c_smbus_read_byte_data(client,
1350 FSCHMD_REG_FAN_ACT[data->kind][i]);
1351 data->fan_status[i] = i2c_smbus_read_byte_data(client,
1352 FSCHMD_REG_FAN_STATE[data->kind][i]);
1353 data->fan_ripple[i] = i2c_smbus_read_byte_data(client,
1354 FSCHMD_REG_FAN_RIPPLE[data->kind][i]);
1355
1356 /* The fscpos third fan doesn't have a fan_min */
1357 if (FSCHMD_REG_FAN_MIN[data->kind][i])
1358 data->fan_min[i] = i2c_smbus_read_byte_data(
1359 client,
1360 FSCHMD_REG_FAN_MIN[data->kind][i]);
1361
1362 /* reset fan status if speed is back to > 0 */
1363 if ((data->fan_status[i] & FSCHMD_FAN_ALARM) &&
1364 data->fan_act[i])
1365 i2c_smbus_write_byte_data(client,
1366 FSCHMD_REG_FAN_STATE[data->kind][i],
1367 data->fan_status[i]);
1368 }
1369
1370 for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++)
1371 data->volt[i] = i2c_smbus_read_byte_data(client,
1372 FSCHMD_REG_VOLT[data->kind][i]);
1373
1374 data->last_updated = jiffies;
1375 data->valid = 1;
1376 }
1377
1378 mutex_unlock(&data->update_lock);
1379
1380 return data;
1381}
1382
1383module_i2c_driver(fschmd_driver);
1384
1385MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
1386MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles, Heimdall, Hades "
1387 "and Syleus driver");
1388MODULE_LICENSE("GPL");