Linux Audio

Check our new training course

Loading...
  1/*
  2 * viking.h:  Defines specific to the GNU/Viking MBUS module.
  3 *            This is SRMMU stuff.
  4 *
  5 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
  6 */
  7#ifndef _SPARC_VIKING_H
  8#define _SPARC_VIKING_H
  9
 10#include <asm/asi.h>
 11#include <asm/mxcc.h>
 12#include <asm/pgtsrmmu.h>
 13
 14/* Bits in the SRMMU control register for GNU/Viking modules.
 15 *
 16 * -----------------------------------------------------------
 17 * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME|
 18 * -----------------------------------------------------------
 19 *  31     24 23-17 16 15 14 13 12 11  10  9  8  7  6-2  1  0
 20 *
 21 * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache
 22 *                            1 = Twalks are cacheable in E-cache
 23 *
 24 * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present
 25 * and never caches them internally (or so states the docs).  Therefore
 26 * for machines lacking an E-cache (ie. in MBUS mode) this bit must
 27 * remain cleared.
 28 *
 29 * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable
 30 *                            1 = Passthru physical accesses cacheable
 31 *
 32 * This indicates whether accesses are cacheable when no cachable bit
 33 * is present in the pte when the processor is in boot-mode or the
 34 * access does not need pte's for translation (ie. pass-thru ASI's).
 35 * "Cachable" is only referring to E-cache (if present) and not the
 36 * on chip split I/D caches of the GNU/Viking.
 37 *
 38 * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on
 39 *
 40 * This enables snooping on the GNU/Viking bus.  This must be on
 41 * for the hardware cache consistency mechanisms of the GNU/Viking
 42 * to work at all.  On non-mxcc GNU/Viking modules the split I/D
 43 * caches will snoop regardless of whether they are enabled, this
 44 * takes care of the case where the I or D or both caches are turned
 45 * off yet still contain valid data.  Note also that this bit does
 46 * not affect GNU/Viking store-buffer snoops, those happen if the
 47 * store-buffer is enabled no matter what.
 48 *
 49 * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
 50 *
 51 * This indicates whether the GNU/Viking is in boot-mode or not,
 52 * if it is then all instruction fetch physical addresses are
 53 * computed as 0xff0000000 + low 28 bits of requested address.
 54 * GNU/Viking boot-mode does not affect data accesses.  Also,
 55 * in boot mode instruction accesses bypass the split on chip I/D
 56 * caches, they may be cached by the GNU/MXCC if present and enabled.
 57 *
 58 * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode
 59 *
 60 * This indicated the GNU/Viking configuration present.  If in
 61 * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache.  If it is
 62 * not then the GNU/Viking is on a module VBUS connected directly
 63 * to a GNU/MXCC cache controller.  The GNU/MXCC can be thus connected
 64 * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d).
 65 *
 66 * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on
 67 *
 68 * The GNU/Viking store buffer allows the chip to continue execution
 69 * after a store even if the data cannot be placed in one of the
 70 * caches during that cycle.  If disabled, all stores operations
 71 * occur synchronously.
 72 *
 73 * IC: Instruction Cache -- 0 = off, 1 = on
 74 * DC: Data Cache -- 0 = off, 1 = 0n
 75 *
 76 * These bits enable the on-cpu GNU/Viking split I/D caches.  Note,
 77 * as mentioned above, these caches will snoop the bus in GNU/MBUS
 78 * configurations even when disabled to avoid data corruption.
 79 *
 80 * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
 81 * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
 82 *
 83 */
 84
 85#define VIKING_MMUENABLE    0x00000001
 86#define VIKING_NOFAULT      0x00000002
 87#define VIKING_PSO          0x00000080
 88#define VIKING_DCENABLE     0x00000100   /* Enable data cache */
 89#define VIKING_ICENABLE     0x00000200   /* Enable instruction cache */
 90#define VIKING_SBENABLE     0x00000400   /* Enable store buffer */
 91#define VIKING_MMODE        0x00000800   /* MBUS mode */
 92#define VIKING_PCENABLE     0x00001000   /* Enable parity checking */
 93#define VIKING_BMODE        0x00002000   
 94#define VIKING_SPENABLE     0x00004000   /* Enable bus cache snooping */
 95#define VIKING_ACENABLE     0x00008000   /* Enable alternate caching */
 96#define VIKING_TCENABLE     0x00010000   /* Enable table-walks to be cached */
 97#define VIKING_DPENABLE     0x00040000   /* Enable the data prefetcher */
 98
 99/*
100 * GNU/Viking Breakpoint Action Register fields.
101 */
102#define VIKING_ACTION_MIX   0x00001000   /* Enable multiple instructions */
103
104/*
105 * GNU/Viking Cache Tags.
106 */
107#define VIKING_PTAG_VALID   0x01000000   /* Cache block is valid */
108#define VIKING_PTAG_DIRTY   0x00010000   /* Block has been modified */
109#define VIKING_PTAG_SHARED  0x00000100   /* Shared with some other cache */
110
111#ifndef __ASSEMBLY__
112
113static inline void viking_flush_icache(void)
114{
115	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
116			     : /* no outputs */
117			     : "i" (ASI_M_IC_FLCLEAR)
118			     : "memory");
119}
120
121static inline void viking_flush_dcache(void)
122{
123	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
124			     : /* no outputs */
125			     : "i" (ASI_M_DC_FLCLEAR)
126			     : "memory");
127}
128
129static inline void viking_unlock_icache(void)
130{
131	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
132			     : /* no outputs */
133			     : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR)
134			     : "memory");
135}
136
137static inline void viking_unlock_dcache(void)
138{
139	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
140			     : /* no outputs */
141			     : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR)
142			     : "memory");
143}
144
145static inline void viking_set_bpreg(unsigned long regval)
146{
147	__asm__ __volatile__("sta %0, [%%g0] %1\n\t"
148			     : /* no outputs */
149			     : "r" (regval), "i" (ASI_M_ACTION)
150			     : "memory");
151}
152
153static inline unsigned long viking_get_bpreg(void)
154{
155	unsigned long regval;
156
157	__asm__ __volatile__("lda [%%g0] %1, %0\n\t"
158			     : "=r" (regval)
159			     : "i" (ASI_M_ACTION));
160	return regval;
161}
162
163static inline void viking_get_dcache_ptag(int set, int block,
164					      unsigned long *data)
165{
166	unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) |
167			     0x80000000;
168	unsigned long info, page;
169
170	__asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t"
171			      "or %%g0, %%g2, %0\n\t"
172			      "or %%g0, %%g3, %1\n\t"
173			      : "=r" (info), "=r" (page)
174			      : "r" (ptag), "i" (ASI_M_DATAC_TAG)
175			      : "g2", "g3");
176	data[0] = info;
177	data[1] = page;
178}
179
180static inline void viking_mxcc_turn_off_parity(unsigned long *mregp,
181						   unsigned long *mxcc_cregp)
182{
183	unsigned long mreg = *mregp;
184	unsigned long mxcc_creg = *mxcc_cregp;
185
186	mreg &= ~(VIKING_PCENABLE);
187	mxcc_creg &= ~(MXCC_CTL_PARE);
188
189	__asm__ __volatile__ ("set 1f, %%g2\n\t"
190			      "andcc %%g2, 4, %%g0\n\t"
191			      "bne 2f\n\t"
192			      " nop\n"
193			      "1:\n\t"
194			      "sta %0, [%%g0] %3\n\t"
195			      "sta %1, [%2] %4\n\t"
196			      "b 1f\n\t"
197			      " nop\n\t"
198			      "nop\n"
199			      "2:\n\t"
200			      "sta %0, [%%g0] %3\n\t"
201			      "sta %1, [%2] %4\n"
202			      "1:\n\t"
203			      : /* no output */
204			      : "r" (mreg), "r" (mxcc_creg),
205			        "r" (MXCC_CREG), "i" (ASI_M_MMUREGS),
206			        "i" (ASI_M_MXCC)
207			      : "g2", "memory", "cc");
208	*mregp = mreg;
209	*mxcc_cregp = mxcc_creg;
210}
211
212static inline unsigned long viking_hwprobe(unsigned long vaddr)
213{
214	unsigned long val;
215
216	vaddr &= PAGE_MASK;
217	/* Probe all MMU entries. */
218	__asm__ __volatile__("lda [%1] %2, %0\n\t"
219			     : "=r" (val)
220			     : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
221	if (!val)
222		return 0;
223
224	/* Probe region. */
225	__asm__ __volatile__("lda [%1] %2, %0\n\t"
226			     : "=r" (val)
227			     : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE));
228	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
229		vaddr &= ~SRMMU_PGDIR_MASK;
230		vaddr >>= PAGE_SHIFT;
231		return val | (vaddr << 8);
232	}
233
234	/* Probe segment. */
235	__asm__ __volatile__("lda [%1] %2, %0\n\t"
236			     : "=r" (val)
237			     : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE));
238	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
239		vaddr &= ~SRMMU_REAL_PMD_MASK;
240		vaddr >>= PAGE_SHIFT;
241		return val | (vaddr << 8);
242	}
243
244	/* Probe page. */
245	__asm__ __volatile__("lda [%1] %2, %0\n\t"
246			     : "=r" (val)
247			     : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE));
248	return val;
249}
250
251#endif /* !__ASSEMBLY__ */
252
253#endif /* !(_SPARC_VIKING_H) */