Linux Audio

Check our new training course

Loading...
  1/*
  2 *  linux/arch/arm/mm/proc-arm1022.S: MMU functions for ARM1022E
  3 *
  4 *  Copyright (C) 2000 ARM Limited
  5 *  Copyright (C) 2000 Deep Blue Solutions Ltd.
  6 *  hacked for non-paged-MM by Hyok S. Choi, 2003.
  7 *
  8 * This program is free software; you can redistribute it and/or modify
  9 * it under the terms of the GNU General Public License as published by
 10 * the Free Software Foundation; either version 2 of the License, or
 11 * (at your option) any later version.
 12 *
 13 *
 14 * These are the low level assembler for performing cache and TLB
 15 * functions on the ARM1022E.
 16 */
 17#include <linux/linkage.h>
 18#include <linux/init.h>
 19#include <asm/assembler.h>
 20#include <asm/asm-offsets.h>
 21#include <asm/hwcap.h>
 22#include <asm/pgtable-hwdef.h>
 23#include <asm/pgtable.h>
 24#include <asm/ptrace.h>
 25
 26#include "proc-macros.S"
 27
 28/*
 29 * This is the maximum size of an area which will be invalidated
 30 * using the single invalidate entry instructions.  Anything larger
 31 * than this, and we go for the whole cache.
 32 *
 33 * This value should be chosen such that we choose the cheapest
 34 * alternative.
 35 */
 36#define MAX_AREA_SIZE	32768
 37
 38/*
 39 * The size of one data cache line.
 40 */
 41#define CACHE_DLINESIZE	32
 42
 43/*
 44 * The number of data cache segments.
 45 */
 46#define CACHE_DSEGMENTS	16
 47
 48/*
 49 * The number of lines in a cache segment.
 50 */
 51#define CACHE_DENTRIES	64
 52
 53/*
 54 * This is the size at which it becomes more efficient to
 55 * clean the whole cache, rather than using the individual
 56 * cache line maintenance instructions.
 57 */
 58#define CACHE_DLIMIT	32768
 59
 60	.text
 61/*
 62 * cpu_arm1022_proc_init()
 63 */
 64ENTRY(cpu_arm1022_proc_init)
 65	mov	pc, lr
 66
 67/*
 68 * cpu_arm1022_proc_fin()
 69 */
 70ENTRY(cpu_arm1022_proc_fin)
 71	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 72	bic	r0, r0, #0x1000 		@ ...i............
 73	bic	r0, r0, #0x000e 		@ ............wca.
 74	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 75	mov	pc, lr
 76
 77/*
 78 * cpu_arm1022_reset(loc)
 79 *
 80 * Perform a soft reset of the system.	Put the CPU into the
 81 * same state as it would be if it had been reset, and branch
 82 * to what would be the reset vector.
 83 *
 84 * loc: location to jump to for soft reset
 85 */
 86	.align	5
 87	.pushsection	.idmap.text, "ax"
 88ENTRY(cpu_arm1022_reset)
 89	mov	ip, #0
 90	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
 91	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 92#ifdef CONFIG_MMU
 93	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 94#endif
 95	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
 96	bic	ip, ip, #0x000f 		@ ............wcam
 97	bic	ip, ip, #0x1100 		@ ...i...s........
 98	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 99	mov	pc, r0
100ENDPROC(cpu_arm1022_reset)
101	.popsection
102
103/*
104 * cpu_arm1022_do_idle()
105 */
106	.align	5
107ENTRY(cpu_arm1022_do_idle)
108	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
109	mov	pc, lr
110
111/* ================================= CACHE ================================ */
112
113	.align	5
114
115/*
116 *	flush_icache_all()
117 *
118 *	Unconditionally clean and invalidate the entire icache.
119 */
120ENTRY(arm1022_flush_icache_all)
121#ifndef CONFIG_CPU_ICACHE_DISABLE
122	mov	r0, #0
123	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
124#endif
125	mov	pc, lr
126ENDPROC(arm1022_flush_icache_all)
127
128/*
129 *	flush_user_cache_all()
130 *
131 *	Invalidate all cache entries in a particular address
132 *	space.
133 */
134ENTRY(arm1022_flush_user_cache_all)
135	/* FALLTHROUGH */
136/*
137 *	flush_kern_cache_all()
138 *
139 *	Clean and invalidate the entire cache.
140 */
141ENTRY(arm1022_flush_kern_cache_all)
142	mov	r2, #VM_EXEC
143	mov	ip, #0
144__flush_whole_cache:
145#ifndef CONFIG_CPU_DCACHE_DISABLE
146	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
1471:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
1482:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
149	subs	r3, r3, #1 << 26
150	bcs	2b				@ entries 63 to 0
151	subs	r1, r1, #1 << 5
152	bcs	1b				@ segments 15 to 0
153#endif
154	tst	r2, #VM_EXEC
155#ifndef CONFIG_CPU_ICACHE_DISABLE
156	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
157#endif
158	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
159	mov	pc, lr
160
161/*
162 *	flush_user_cache_range(start, end, flags)
163 *
164 *	Invalidate a range of cache entries in the specified
165 *	address space.
166 *
167 *	- start	- start address (inclusive)
168 *	- end	- end address (exclusive)
169 *	- flags	- vm_flags for this space
170 */
171ENTRY(arm1022_flush_user_cache_range)
172	mov	ip, #0
173	sub	r3, r1, r0			@ calculate total size
174	cmp	r3, #CACHE_DLIMIT
175	bhs	__flush_whole_cache
176
177#ifndef CONFIG_CPU_DCACHE_DISABLE
1781:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
179	add	r0, r0, #CACHE_DLINESIZE
180	cmp	r0, r1
181	blo	1b
182#endif
183	tst	r2, #VM_EXEC
184#ifndef CONFIG_CPU_ICACHE_DISABLE
185	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
186#endif
187	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
188	mov	pc, lr
189
190/*
191 *	coherent_kern_range(start, end)
192 *
193 *	Ensure coherency between the Icache and the Dcache in the
194 *	region described by start.  If you have non-snooping
195 *	Harvard caches, you need to implement this function.
196 *
197 *	- start	- virtual start address
198 *	- end	- virtual end address
199 */
200ENTRY(arm1022_coherent_kern_range)
201	/* FALLTHROUGH */
202
203/*
204 *	coherent_user_range(start, end)
205 *
206 *	Ensure coherency between the Icache and the Dcache in the
207 *	region described by start.  If you have non-snooping
208 *	Harvard caches, you need to implement this function.
209 *
210 *	- start	- virtual start address
211 *	- end	- virtual end address
212 */
213ENTRY(arm1022_coherent_user_range)
214	mov	ip, #0
215	bic	r0, r0, #CACHE_DLINESIZE - 1
2161:
217#ifndef CONFIG_CPU_DCACHE_DISABLE
218	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
219#endif
220#ifndef CONFIG_CPU_ICACHE_DISABLE
221	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
222#endif
223	add	r0, r0, #CACHE_DLINESIZE
224	cmp	r0, r1
225	blo	1b
226	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
227	mov	r0, #0
228	mov	pc, lr
229
230/*
231 *	flush_kern_dcache_area(void *addr, size_t size)
232 *
233 *	Ensure no D cache aliasing occurs, either with itself or
234 *	the I cache
235 *
236 *	- addr	- kernel address
237 *	- size	- region size
238 */
239ENTRY(arm1022_flush_kern_dcache_area)
240	mov	ip, #0
241#ifndef CONFIG_CPU_DCACHE_DISABLE
242	add	r1, r0, r1
2431:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
244	add	r0, r0, #CACHE_DLINESIZE
245	cmp	r0, r1
246	blo	1b
247#endif
248	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
249	mov	pc, lr
250
251/*
252 *	dma_inv_range(start, end)
253 *
254 *	Invalidate (discard) the specified virtual address range.
255 *	May not write back any entries.  If 'start' or 'end'
256 *	are not cache line aligned, those lines must be written
257 *	back.
258 *
259 *	- start	- virtual start address
260 *	- end	- virtual end address
261 *
262 * (same as v4wb)
263 */
264arm1022_dma_inv_range:
265	mov	ip, #0
266#ifndef CONFIG_CPU_DCACHE_DISABLE
267	tst	r0, #CACHE_DLINESIZE - 1
268	bic	r0, r0, #CACHE_DLINESIZE - 1
269	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
270	tst	r1, #CACHE_DLINESIZE - 1
271	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
2721:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
273	add	r0, r0, #CACHE_DLINESIZE
274	cmp	r0, r1
275	blo	1b
276#endif
277	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
278	mov	pc, lr
279
280/*
281 *	dma_clean_range(start, end)
282 *
283 *	Clean the specified virtual address range.
284 *
285 *	- start	- virtual start address
286 *	- end	- virtual end address
287 *
288 * (same as v4wb)
289 */
290arm1022_dma_clean_range:
291	mov	ip, #0
292#ifndef CONFIG_CPU_DCACHE_DISABLE
293	bic	r0, r0, #CACHE_DLINESIZE - 1
2941:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
295	add	r0, r0, #CACHE_DLINESIZE
296	cmp	r0, r1
297	blo	1b
298#endif
299	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
300	mov	pc, lr
301
302/*
303 *	dma_flush_range(start, end)
304 *
305 *	Clean and invalidate the specified virtual address range.
306 *
307 *	- start	- virtual start address
308 *	- end	- virtual end address
309 */
310ENTRY(arm1022_dma_flush_range)
311	mov	ip, #0
312#ifndef CONFIG_CPU_DCACHE_DISABLE
313	bic	r0, r0, #CACHE_DLINESIZE - 1
3141:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
315	add	r0, r0, #CACHE_DLINESIZE
316	cmp	r0, r1
317	blo	1b
318#endif
319	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
320	mov	pc, lr
321
322/*
323 *	dma_map_area(start, size, dir)
324 *	- start	- kernel virtual start address
325 *	- size	- size of region
326 *	- dir	- DMA direction
327 */
328ENTRY(arm1022_dma_map_area)
329	add	r1, r1, r0
330	cmp	r2, #DMA_TO_DEVICE
331	beq	arm1022_dma_clean_range
332	bcs	arm1022_dma_inv_range
333	b	arm1022_dma_flush_range
334ENDPROC(arm1022_dma_map_area)
335
336/*
337 *	dma_unmap_area(start, size, dir)
338 *	- start	- kernel virtual start address
339 *	- size	- size of region
340 *	- dir	- DMA direction
341 */
342ENTRY(arm1022_dma_unmap_area)
343	mov	pc, lr
344ENDPROC(arm1022_dma_unmap_area)
345
346	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
347	define_cache_functions arm1022
348
349	.align	5
350ENTRY(cpu_arm1022_dcache_clean_area)
351#ifndef CONFIG_CPU_DCACHE_DISABLE
352	mov	ip, #0
3531:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
354	add	r0, r0, #CACHE_DLINESIZE
355	subs	r1, r1, #CACHE_DLINESIZE
356	bhi	1b
357#endif
358	mov	pc, lr
359
360/* =============================== PageTable ============================== */
361
362/*
363 * cpu_arm1022_switch_mm(pgd)
364 *
365 * Set the translation base pointer to be as described by pgd.
366 *
367 * pgd: new page tables
368 */
369	.align	5
370ENTRY(cpu_arm1022_switch_mm)
371#ifdef CONFIG_MMU
372#ifndef CONFIG_CPU_DCACHE_DISABLE
373	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
3741:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
3752:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
376	subs	r3, r3, #1 << 26
377	bcs	2b				@ entries 63 to 0
378	subs	r1, r1, #1 << 5
379	bcs	1b				@ segments 15 to 0
380#endif
381	mov	r1, #0
382#ifndef CONFIG_CPU_ICACHE_DISABLE
383	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I cache
384#endif
385	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
386	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
387	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
388#endif
389	mov	pc, lr
390        
391/*
392 * cpu_arm1022_set_pte_ext(ptep, pte, ext)
393 *
394 * Set a PTE and flush it out
395 */
396	.align	5
397ENTRY(cpu_arm1022_set_pte_ext)
398#ifdef CONFIG_MMU
399	armv3_set_pte_ext
400	mov	r0, r0
401#ifndef CONFIG_CPU_DCACHE_DISABLE
402	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
403#endif
404#endif /* CONFIG_MMU */
405	mov	pc, lr
406
407	__CPUINIT
408
409	.type	__arm1022_setup, #function
410__arm1022_setup:
411	mov	r0, #0
412	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
413	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
414#ifdef CONFIG_MMU
415	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
416#endif
417	adr	r5, arm1022_crval
418	ldmia	r5, {r5, r6}
419	mrc	p15, 0, r0, c1, c0		@ get control register v4
420	bic	r0, r0, r5
421	orr	r0, r0, r6
422#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
423	orr	r0, r0, #0x4000 		@ .R..............
424#endif
425	mov	pc, lr
426	.size	__arm1022_setup, . - __arm1022_setup
427
428	/*
429	 *  R
430	 * .RVI ZFRS BLDP WCAM
431	 * .011 1001 ..11 0101
432	 * 
433	 */
434	.type	arm1022_crval, #object
435arm1022_crval:
436	crval	clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
437
438	__INITDATA
439	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
440	define_processor_functions arm1022, dabort=v4t_early_abort, pabort=legacy_pabort
441
442	.section ".rodata"
443
444	string	cpu_arch_name, "armv5te"
445	string	cpu_elf_name, "v5"
446	string	cpu_arm1022_name, "ARM1022"
447
448	.align
449
450	.section ".proc.info.init", #alloc, #execinstr
451
452	.type	__arm1022_proc_info,#object
453__arm1022_proc_info:
454	.long	0x4105a220			@ ARM 1022E (v5TE)
455	.long	0xff0ffff0
456	.long   PMD_TYPE_SECT | \
457		PMD_BIT4 | \
458		PMD_SECT_AP_WRITE | \
459		PMD_SECT_AP_READ
460	.long   PMD_TYPE_SECT | \
461		PMD_BIT4 | \
462		PMD_SECT_AP_WRITE | \
463		PMD_SECT_AP_READ
464	b	__arm1022_setup
465	.long	cpu_arch_name
466	.long	cpu_elf_name
467	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
468	.long	cpu_arm1022_name
469	.long	arm1022_processor_functions
470	.long	v4wbi_tlb_fns
471	.long	v4wb_user_fns
472	.long	arm1022_cache_fns
473	.size	__arm1022_proc_info, . - __arm1022_proc_info